USER MANUAL - Prosperity Lamps and Components Limited

USER MANUAL
KMLWSH36W10
Index
summarize ......................................................................... 3
safety instruction ................................................................ 3
outside size picture ............................................................. 4
main function ...................................................................... 5
DMX controller function ....................................................... 5
Display operation instruction............................................... 7
Manual instruction............................................................... 8
Operating control instruction............................................... 9
XRL connection instruction .................................................. 9
Connection picture .............................................................11
Problem analyze.................................................................12
Technical’s pecification….………….…………………………..………14
Summarize
Thank you for purchasing our Moving head LED lighting. Please read these
instructions carefully before begin and operate the fixtures according to these
instructions to avoid any possible damages and accidents causes by misusage.
Products introduce
This led KMLWSH36W10 light is uses aluminum shell, designed in a fashion of
hydrodynamic form. Appearance shows: long can, short can or short can with
color filter. It takes uses high power R, G, B, W 5 4 in 1 LED. It uses power
switch, performs low weight and consumption, stable capability and long life.
The built-in program includes dimmer, strobe, eotic, gradual change, fading and
so on. International standard DMX 512 signal is requested.
Packing list
• KMLWSH36W10 light
1PC
• Bracket
1PC
• DMX cable
1PC
• Power Cable
1PC
• The use manual
• Warranty Card
Safety Information
! Enquire the skilled people before any repair;
! Always make sure disconnect from the power source before setting up, serving and
moving;.
! Avoid direct eye exposure to the fixture when it is on;
Safety instruction
● Make sure the power supply voltages are consistent with this lights
,Ensure the
use of voltage is in the range of the request technical parameter.
●before the installation, please check the light’s fasteners and mechanical
structure have been received in good condition and appear no damage.
●This light is designed for indoor use, working temperature is lower than 50
degree.
●The fixtures maybe mounted in any position provided there is adequate room
for ventilation. Make sure there are no inflammable and explosive items
(ornaments) in 0.5 meters away.
●Yellow / green cabling earthling safety; no flicker when the fixture is working on.
Outside Size Picture
Main Function
•
Use high quality LED lighting source, low power consumption, high
brightness, stable performance and long life.
•
Each color of LED with 256 dimming. RGB can make over 16.7 million colors.
The color mixing is better with White LEDs
、
、
•
linear dimming 0%-100%, Strobe gradual change jumping change
•
DMX512 Controller 4 button set DMX ID address with LCD display
•
master slave/interconnected multi-machine control
•
lens degree: 25º 45º optional
•
using switching power supply to protect the LED to work well
•
Pan 540 degrees, Tilt 270 degrees, reset
•
DMX channels optional
,
、
DMX Control Function
14CH
Channel
1CH
2CH
3CH
4CH
5CH
6CH
CH8
DMX Value
0—255
0—255
0—255
0—255
0—255
0—10
11—255
0—20
21—30
31—40
41—50
51—60
61—70
71—80
81—90
91—100
101—110
111—120
121—130
131—140
141—150
151—160
161—170
171—180
181—190
191—200
201—210
211—220
221—255
0—255
CH9
CH10
CH11
CH12
0-255
0-255
0-255
0-255
CH13
CH14
0-255
0-254
255-255
7CH
Function
General dimming
Red dimming
Green dimming
Blue dimming
White
Strobe off
Strobe speed
Invalid
AUTO 1
AUTO 2
AUTO 3
AUTO 4
AUTO 5
AUTO 6
AUTO 7
AUTO 8
AUTO 9
AUTO 10
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CUSTOM 5
CUSTOM 6
CUSTOM 7
CUSTOM 8
CUSTOM 9
CUSTOM 10
keep
Automatic speed
fast-slow
Pan 0--450°
Tilt 0--270°
Pan fine 0—2.1 degrees
Tilt fine 0—1.0 degree
(
)
(
X/Y speed fast-slow
invalid
reset
)
Display Operation
Back side
:DMX512 DMX-IN XLR socket
2:DMX512 DMX-OUT XLR socket
3:AC POWER-IN socket(AC100-240V,50-60Hz)
4:FUSE:5A
5:power switch(ON/OFF)
1
Front side
:(LCD display+4 button input)
•
MENU
: access the menu or return to a previous menu option
•
ENTER : select the current menu option
•
UP
•
DOWN : menu selection or parameters decrease
: menu selection or parameter increments
Manual Instruction
(Address)
(Address=)
A001-A512
(x Reverse)
(option)
(Y Reverse)
(NO/YES)
(XY Exchange)
(Language)
English
(lightness)
1-32
(Display)
(poorlight)
LOGO
[menu]
constant open
dim
off
(NO/YES)
ch1
0--255
(man Control)
ch12
(Test
operation)
(Sound)
(Auto)
(Resume
default)
(enter)
(Fixture reset)
(enter)
(program
run)
1
2
:Press [menu] or [enter] to main menu
:Press [up] or [down] to select options
Operating Control Instruction
Master/Slave
Master
:The master should set as built-in program and shows” P - X – X” send out
synchronization signals. To avoid the host signal and DMX512 signals interfere
with each other, should cut off the DMX512 signals. The signal lines are longer
than 60 meters should increase a signal amplifier.
:
Slave It must be in the SLAV mode and the address code should be A001 to assure
receive the master’s signals correctly. Only one light can be set as a Master and
others are slaves.
XLR cable connecting
XRL cable:
:
The stand connection way of the XRL is: one end connects to the male plug, and
the other connects to the female.
Noted:
In order to avoid failures and interference signal transmission,
we connect
a resistance120Ω(
1/4W)
at the end of the DMX connecting as below:
The Conversion between 3pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to
3PIN cable
Connecting picture
Problem Analyze
Problem
Checking way
Check the power source plug is in normal or not
Can not turn on the Check the switch of the lights is off or on
light
Check it the fuse if in normal
Check the DMX cable is connect to the lights or not
DMX can not control Check the DMX512 controller work in normal or not
it
Check the DMX cable is normal or not
Check if the lights is in DMX mode(A001)
When connect to the electricity,
did the led flash one time?
If so,
the power source is normal; If not,
please check if the
Display not bright
switch and the transformer has power out
Check if the power input of the IC board is normal
Check if the cable connect to the display loose
Change the main board to see if it is normal.
Chang the display
When connect to the electricity,
did the led flash one time?
If so,
the power source is normal; If not,
please check if the
LED not light
switch and the transformer has power out
Check if the power input of the IC board is normal
Check if the cable connect to the display loose
Change the main board to see if it is normal.
Chang the display
LED is connect by leds in series first, then connect parallel,
so please check if the leds is loose
Some of the LED not Use the multimeter to check if the led is bright or not, of
light
not, please change the led
check whether current limiting resistor is normal or not
Check constant current IC is normal or not (compared with
the normal IC)
Single color leds
Check the switch of this color is normal or not
always bright/not
Change the IC control board
bright
Noted: only professional persons can do as above!
Technical Specification
•
:AC 100V-240V/47-63HZ
Output voltage:DC24V
Consume:260W
Lamp Type:High Power LED(10w)
Lamp Spec:RGBW 4-in-1 LED(36 pcs)
•
Constant current drive: 500Ma(single color drive)
•
Refresh Rate: above 400HZ
•
Life Span: above 50000 hours
•
Control Signal
•
•
•
•
Input voltage
•
:DMX512, master and slaver, sound activated
Control mode:stand alone/ DMX/ master and slaver
Channel:14CH,10CH
•
Color effect: R,G,B,W color mixing
•
Function Effect dimmer, strobe, eotic, fade, sound activated
•
Pan 540 degrees, Tilt 270 degrees, reset b
•
Pan fine 2.1 degrees, Tilt fine 1.0 degree
•
Beam Angle: 25° or 45°
•
Cooling mode: Fan cooling
•
Protection rate:IP20
•
Anti-electricity intension 1.5KV
•
•
•
•
:
:
Insulation Resistance:>2MΩ
Size::320*242*385mm
Net Weight:9.5KG
Copyright 2012 KANDOLITE. All rights
reserved. Due to continuous improvements
and innovations, specifications may change
without notice.