RO101 User Manual - PurePro® USA Reverse Osmosis Systems

Memo
Type of product
P URE PRO
DRINKING WATER SYSTEM
RO101
Date of purchase
Name
Tel
Address
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
RO101
USER'S MANUAL
PURE-PRO
15
01
Introduction of RO101
02
What is reverse osmosis
03
Components & Selected filters
04
Cartridge filters
05
The parts of RO101
06
Tubing connection diagram
07
Installation diagram
08
Change filters
09
Change membrane
10
Operation regulation
12
FAQ
14
Maintenance checking list
15
Memo
Thank you very much for selecting Pure-Pro Water Corp.
In order to bring the best use of your system, please read
the user's manual carefully before installation and follow
RO101 Standard Type Water Purification System
P URE PRO
DRINKING WATER SYSTEM
the regulations.
Maintenance checking list
Introduction of RO101
PURE-PRO
01
Filters
1st stage 2nd stage 3rd stage
4th stage
5th stage
Date
¨ Specifications
Production: 80 GPD / 302 LPD
Available in 110Volt, 220Volt or 240Volt (50/60Hz) with a transformer
Safety approval: TUV (EN60950) & CE MARK
100% factory tested and sterilized ready for installation
Operation pressure: 5 -80 PSI
3.2 gallons NSF standards water storage tank
FDA approved polypropylene made flat cap housing (double O'ring)
Automatic shut-off valve
Flow restricto
Stainless steel check valve
Long reach attractive faucet
Feed water connector & deliver valve
Drain saddle valve
Four-color coded 1/4 inch tubing for system connection
Completely assembled & water leaking testing
Dimensions: (cm) 37 (L) x 20 (W) x 45(H) - System
(cm) 28 (L) x 35 (W) x 28(H) - Tank
Weight: 12 Kg - System
4 Kg - Tank
14
RO101 Standard Type Water Purification System
RO101 Standard Type Water Purification System
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
Other items
PURE-PRO
REVERSE OSMOSIS SYSTEM
Comply with newly RO technology, RO101 is designed for where feed water has
very low water pressure (under 45PSI), or where the source water contains
higher than normal amount of dissolved solids. It uses high quality booster pump
that can provides 100PSI water pressure to pass through the membrane even
with areas under low water pressures. The booster pump prevents the life of
membrane from damaging and prolongs and improves the TDS rejection. It is
capable to remove over 95% of total dissolved solids, +99% of all organics, and
+99% of all bacteria. RO105 meets all different water quality needs.
REVERSE OSMOSIS SYSTEM
¨ RO101- Standard Type
DRINKING WATER SYSTEM
What is reverse osmosis
Q: How will the Pure-Pro series water affect mixed beverages?
Because reverse osmosis removes invisible contaminants that mask flavor, it
allows the natural taste of your beverages to come through. You will be able to
use less coffee and still get the full flavor. Concentrated beverages like orange
juice will taste tangier. You will probably be drinking a lot more water as well,
since many people drink soda, Kool-Aid, concentrated juices, and beer as an
alternative to bad-tasting tap water. Also, Pure-Pro eliminates most of the lime
build up on drip coffee makers, preventing the need for frequent cleaning. No
longer will you find the white scum on the inside of pans after boiling water.
Reverse osmosis was originally designed to make sea water drinkable for the
navy. It is ideal for anyone on a low sodium diet. An R.O. membrane has a pore
size much smaller than bacteria virus, or the cryptosporidium parasite. When
functioning properly it will remove all microorganisms from tap water and produce
sterile water. Reverse osmosis is the reversal of the natural flow of osmosis. In a
water purification system, the goal is not to dilute the salt solution, but to
osmotic flow is reversed, water from the salt solution is forced to pass through the
membrane in the opposite direction by application of pressure-thus the term
Q: How much water does the Pure-Pro system produce ?
Under ideal conditions, the RE1812-70 TFC membrane is rated at 70gallons of
production per day (70gpd at 60psi, 95gpd at 100psi). Under the average
conditions, the consumer can expect 70-95 gallons of product water per day. But
that's still a lot of water for the average household's drinking and cooking
requirements.
REVERSE OSMOSIS. Through this process, we are able to produce pure water
by screening out the salts and other contaminants.
PURE-PRO
13
REVERSE OSMOSIS SYSTEM
separate the pure water from the salt and other contaminants. When the natural
02
Q: Don't people need minerals removed from the water ?
Most of the minerals that we receive are from the foods we eat. Only a very
small percentage comes from the water we drink.
Reverse Osmosis
Pressure
Membrane
Q: What is the maintenance schedule for the Pure-Pro System ?
The three pre-filter cartridges should be changed every 6 months. The 5 micron
sediment cartridge filter is the first one; the second is a carbon cartridge filter,
and the third one is a 1 micron sediment filters. (some systems comes with the
Extruded carbon filter.) Failure to change the cartridge every 6 months may
cause chlorine to destroy the membrane.
Water flow
RO101 Standard Type Water Purification System
RO101 Standard Type Water Purification System
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
PURE-PRO
REVERSE OSMOSIS SYSTEM
FAQ
Components & Selected filters
European ceramic faucet
3.2G water storage tank
Housing wrench
Deliver-valve
Water supply connector
Drain saddle
Tank ball shut-off valve
Four color coded 1/4 inch
tubing for system connection
¨Selected filters
Q: Can the Pure-Pro system be connected to an extra faucet?
It only takes a 1/4" tee and tubing to run the water to a refrigerator or a extra
faucet. Some families run Pure-Pro system to all of their bathrooms.
URE PRO
PMineral
Filter
UVC-LIGHTING
Mineral cartridge filter
UV water sterilizer
DRINKING WATER SYSTEM
ULTRAVIOLET WATER STERILIZER
P URE PRO
T.D.S
PURE-PRO
03
Q: What factors affect the quantity and the quality of the water production?
There are four major variables to consider:
1.Pressure-The greater the water pressure, the better water quantity and
quality it produced. Water pressure of 60 PSI is ideal.
0
0
2.Temperature-76 F is the ideal water temperature for R.O. 40 F water will
0
cause the production of R.O. water to fall to half of that at 76 F. The maximum
0
water temperature recommended is 85 F.
3. Total Dissolved Solids (TDS) -The higher the amount of dissolved
contaminants in the water, the lower the quantity of water produced. A high
level of TOTAL DISSOLVED SOLIDS can be overcome with additional water
pressure.
4. Membrane -Different membranes have different characteristics. Some
produce more water than others; some have better contaminant rejection
capabilities; some have greater resistance to chemical abrasion for longer life.
Pure-Pro system includes RE1812-70 The Thin Film Composite (TFC)
membranes combine the best of these characteristics and are considered the
finest membrane in the world.
DRINKING WATER SYSTEM
Infra-Red Filter
Infra-red cartridge filter
Q: What does the Pure-Pro series drinking water taste like?
The taste of the Pure-Pro water depends on the amount of contaminants in the
tap water originally. If 95% of dissolved minerals and chemicals are removed,
the R.O. water may taste like distilled water (no minerals), bottled water (low
mineral), or natural spring water (moderate mineral content).
TDS meter
RO101 Standard Type Water Purification System
RO101 Standard Type Water Purification System
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
REVERSE OSMOSIS SYSTEM
Q: What is the guarantee on the Pure-Pro system ?
The Pure-Pro System (excluding filters) is guaranteed for 1 year for material
and workmanship. All defective parts will be replaced free within the first year
under natural breakdown. The membrane has one year pro-rated guarantee.
12
PURE-PRO
REVERSE OSMOSIS SYSTEM
¨Components
FAQ
Operation regulation
A.With everything connected, turn on the water check for leaks.
B.Make sure the storage tank shut-off valve is "OFF". Open the sink
top faucet.
C.Within a few minutes (up to 15) the water will start to run from the
Cartridge Filters
Cartridge Filters
Filter Description
Shelf life
Stage 1
This 5micron sediment filter is made of 100%
pure polypropylene fibers. High capacity filter
removes dusts, particles and rusts.
6 Months
This block carbon filter is composed of highperformance carbon that removes free chlorine,
odor, organic contaminants, pesticides and
chemicals that contributed to taste and odor.
6 Months
This 1micron sediment filter is made of 100%
pure polypropylene fibers. High capacity filter
removes dusts, particles and rusts.
6 Months
Made in USA. High rejection TFC type membrane
with the capacity of producing 80 gallons per day.
This membrane removes the following hard water
contaminants that may be present in your water:
lead, cooper, barium, chromium, mercury, sodium,
cadmium, fluoride, nitrite, nitrate, and selenium.
4 Years
NSF approved. This post carbon filter is designed
to improve taste. It removes any residual
impurities and odors from the tank and provides a
finer conditioning of pure water.
1 Year
5 Micron
Sediment Filter
faucet slowly.
D.Let the water run for at least 30 minutes. This flushes the carbon
P URE PRO
DRINKING WATER SYSTEM
PURE-PRO
11
Stage 2
Block Carbon Filter
the sink top faucet.
F.Tank will now full of water (usually 2 to 3 hours) after the tank has
filled. Open the sink top faucet and drain all water until the storage
P URE PRO
DRINKING WATER SYSTEM
tank is empty and there is only a small flow from the sink top
faucet.*** DO NOT USE FIRST TANK OF WATER.***
G.Close the sink top faucet. The system is now ready for use.
H.Change filters regularly every 6 to 12 months and have the
membrane checked annually.
Stage3
1 Micron
Sediment Filter
DRINKING WATER SYSTEM
TFC Membrane
Caution
0
1.Do not use hot water (over 45 C)!
P URE PRO
DRINKING WATER SYSTEM
2.Do not freeze the machine!
04
P URE PRO
Stage 4
3.Switch off electricity and water source if away for more than 5 days,
Stage 5
and drain out pure water.
Post Carbon Filter
P URE PRO
DRINKING WATER SYSTEM
RO101 Standard Type Water Purification System
RO101 Standard Type Water Purification System
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
REVERSE OSMOSIS SYSTEM
E.After initial flushing, open the shut-off valve on the tank and close
PURE-PRO
REVERSE OSMOSIS SYSTEM
filters on first time use.
DRINKING WATER SYSTEM
Operation regulation
The parts of RO101
1 Plug in electricity.
Post carbon filter
2 Turn on water source.
Flow restrictor 300ml
To RO system
RO membrane housing
OUT
Pump
IN
The 3rd stage housing
05
4 Pump starts to function.
3 Switch on water tank.
The 1st stage housing
10
The 2nd stage housing
PURE-PRO
FUL
Micro
REVERSE OSMOSIS SYSTEM
IN
Pump
Flow restrictor 300ml
Auto shut-off valve
High pressure protector
To drain out tube
To the faucet
5 Let the water run for at least 30
minutes. This flushes the carbon
filters on first time use.
To the tank
Transformer
Post carbon filter
RO membrane housing
Housing bracket white
RO101 Standard Type Water Purification System
RO101 Standard Type Water Purification System
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
PURE-PRO
REVERSE OSMOSIS SYSTEM
Transformer
Change membrane
1 Unplug electricity.
2 Turn off water source.
3 Switch off water tank.
Tubing connection diagram
CONNECTING THE COLOR TUBING:
A. Connect the WHITE tubing to the water supply connector.
To RO system
B. Connect the BLUE tubing to the sink top faucet.
C. Connect the BLACK tubing to the drain saddle.
5 Remove the membrane housing
cap anticlockwise.
4 Loose the Joco fitting anticlockwise.
09
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
D. Connect the RED tubing to the storage tank.
06
PURE-PRO
PURE-PRO
Joco
Faucet
B
C
Tank
7 Install the membrane by carefully
pushing the spigot end into the
socket at the far end of the housing
until completely in.
6 Remove the membrane by a pincer.
O
RE
NG
PR
TE
WA
R
SY
D
Drain
A
Input water
O
ST
EM
RO101 Standard Type Water Purification System
RO101 Standard Type Water Purification System
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM
Change filters
Installation diagram
Input water :
Install water tank :
Hand tighten plastic
shut-off valve to tank.
Then connect color
tubing.
To RO system
1 Prepare a housing
wrench.
2 Turn off water
source.
3 Switch off water tank.
To RO system
Deliver valve
To water source pipe
Install European ceramic faucet :
Install drain saddle :
5 Open housings clockwise with a wrench.
4 Unplug electricity.
Drill a 1/4" hole into
the drain pipe.
PURE-PRO
08
PURE-PRO
07
REVERSE OSMOSIS SYSTEM
REVERSE OSMOSIS SYSTEM
To faucet
Mount drain
saddle aligning
holes.
6 Put the replacement filters in the
housings and double O' ring.
Assemble membrane :
7 Drain out 1 Gallon of water to
purify replacement filters.
P URE PRO
DRINKING WATER SYSTEM
1.Remove the membrane housing cap.
2.Replace the membrane.
Be sure tighten with
O-ring to prevent
from leaking.
RO101 Standard Type Water Purification System
RO101 Standard Type Water Purification System
P URE PRO
P URE PRO
DRINKING WATER SYSTEM
DRINKING WATER SYSTEM