Advantech ITM-5117 User Manual

User Manual
ITM-5117 Series
17" Industrial LED Touch
Monitor
Copyright
The documentation and the software included with this product are copyrighted 2012
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants to you, t he original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the da te of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defective, it will be rep aired or replaced at no charge during the warranty period. For outof-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
Declaration of Conformity
CE
This product has passed the CE test for env ironmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is a vailable from Advantec h. Please contact your local supplier for
ordering information.
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing included the equipment being operated within an industrial enclosure. In
order to protect the product from being damaged by ESD (Electrostatic Discharge)
and EMI leakage, we strongly recommend the use of CE-compliant indu strial enclosure products.
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfere nce when the eq uipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
FM
This equipment has passed the FM certification. According to the National Fire Protection Association, work sites are classi fied into different classes, divisions and
groups, based on hazard considerations. This equipment is compliant with the specifications of Class I, Division 2, Groups A, B, C and D indoor hazards.
Technical Support and Assistance
1.
2.
Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,
etc.)
– A complete description of the problem
– The exact wording of any error messages
Warnings, Cautions and Notes
Warning! Warnings indicate conditions, which if not observed, can cause personal
injury!
Caution! Cautions are included to help you avoid damaging hardware or losing
data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's
instructions.
Note!
Notes provide optional additional information.
Document Feedback
To assist us in making improvements to this manual, we would welcome comment s
and constructive criticism. Please send all such - in writing to: sup port@advantech.com
Safety Instructions
1.
2.
3.
Read these safety instructions carefully.
Keep this User Manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
The sound pressure level at the operator's position according to IEC 704-1:1982 is
no more than 70 dB (A).
DISCLAIMER: This set of instructions is given accord ing to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Caution! For power adapter selection: the information about the adapter output
rating (12 Vdc, 5 A min, or 18 W min) is provided in the user manual for
user's selection if the power adapter is not shipped with the unit
Chapter
1
Overview
Sections include:
Introduction
Features
Applications
Naming Rule
1
1.1 Introduction
The Advantech ITM-5117 is a brand new Industrial Touch Monitor, designed to meet
the needs of custome rs who wan t quick and easy integrations with Advantech
Embedded Box Computers, like ARK, and DSA. Advantech offers four different types
of ITM-5117 to meet customer's demands. In this manual Advantech will be introducing
ITM-5117R-MA1E (Standalone Monitor series)
1.2 Features
17'' SXGA LED backlight panel which provides 20 ~ 30% power saving
Special easy to clean design of 5-wire resistive plane touch window
All new frame rail design provides a variety of connectors for peripheral devices
Simple & elegant ID design with IP54 front panel protection
Panel with BOX PC combination provides more flexibility for applications
Stable Industrial grade rugged aluminum holder to adjust monitor angle
Long time industrial component support
Combo RS-232 & USB interface for touchscreen function
1.3 Applications
Application scenarios - self-service applications:
KIOSK / POI machine
Transportation machine
Ticketing machine
Financial ATM
Entertainment / Gaming / Slot machine
HMI (Human-Machine Interface) equipment controller monitor
Public communication machine
Public advertisement machine
1.4 Naming Rule
1 2
3
4
5
6
7 8
ITM-5117R -MA1E
Code 1
Integration Level
ITM-5
Panel Mount LCD
Monitor
ITM-6
Sunlight Readable
Monitor
Code 2
Type
1
4:3
2
16:9
Code 3
19
17
15
12
10
08
06
LCD Size
19”
17”
15”
12”
10”
8”
6.4”
Code 4
G
R
P
Touchscreen
Glass
Resistive
Projected
Capacitive
Code 5
SKU
M
Monitor
P
Pluggable
with ARK
L
I-Panel link
with ARK
C
All-in-one
Code 8 Standard
E
RoHS
Code 7 Revision
Change
(minor)
1
1
2
2
Code 6 Revision
Change
(critical)
A
A
B
B
Chapter
2
2
System Setup
Sections include:
Specifications
Dimensions
Panel Mount Assembling SOP
Cable Clamp
Accessory Packing
2.1 Specifications
Note!
The ITM-511 series offers the following features and meets precise
specifications.
Unless otherwise noted, all the information listed below is subject to
change without prior notification.
Size
Display
Touch
17“ LED backlight panel
Resolution
1280 x 1024 (SXGA)
Viewing Angle
85°/85°/85°/85°
Brightness
350 (cd/m2)
Support Color
16.7 M / 262K colors
Contrast Ratio
1000
Response Time
30 [msec]
Lamp Life (hrs)
50,000 hrs
T/S Type
5-Wire Resistive Touch Window
Surface
Hardness
3H
Durability
36 millions times with a silicone rubber.
Hit rate is by 250 g at 2 times per second.
Operating
Temperature
-20 ~ + 60° C
Storage
Environment Temperature
Humidity
-30 ~ + 70° C
5 ~ 95% @ 40° C, non-condensing
Shock
10G peak acceleration (11 ms duration)
Front panel
IP54
IO (M series)
VGA x 1; DVI-D x 1; 12 VDC Jack x 1; USB x1; RS-232X1
(USB & RS-232 are only for touch screen function)
Keys: Menu, Up, Down, Enter, Monitor power on/off
OSD (M series)
System
Menu Functions: Brightness, Volume, Contrast, Clock
Phase, Horizontal Position, Vertical Position and Sharpness
Power
60 W power adapter, with AC 100 ~ 240 V input and DC
+12 V @ 5 A output
EMC
Compliance
CE/FCC/CCC/BSMI
Safety
UL/CB/CCC /BSMI
2.2 Dimensions
2.3 Panel Mount Assembly SOP
1.
Using 16 screws included in accessory box to attach panel mount brackets to
ITM-5117. If the ITM-5117 you received are with brackets already, check if
brackets are well fixed.
2.
Then attaching 8 panel mount clamps, which are also included in the accessory
box, to the brackets for fixing ITM-5117.
2.4 Cable Clamp
A cable clamp is designed to fix power cord from dropping off from ITM-5117 accidentally.
&DEOHFODPS
2.5 Accessory Packing List
Panel-Mount clamper x 8
Screw for panel-mount clamper M4_30L x 8
Cable clamp x 1
Manual/Utility CD
VGA cable 15P(M) 1.8 meter x 1
D-SUB 9P(M)/D-SUB 9P(F) 1.8 meter x 1
Chapter
3
Touchscreen
Sections include:
OSD Functions
Touch Drivers
3
3.1 OSD Functions (ITM-5117R-M Series Only)
The OSD of the ITM-5117 display (1280 x 1024 resolution) was selected to illustrate
examples below:
Buttons
Description
Power
Turn the monitor power ON or OFF.
Menu/Exit
Activate the OSD menu.
Exit menu
Auto/Left/Up
Automatically adjust the clock, phase, H-position and V-position.
Move the selector to the next option.
Increase the gauge value of the selected option.
Right/Down
Move the selector to the previous option.
Decrease the gauge value of the selected option.
Select/Enter
Confirm the selected option.
Enter menu.
LED Function
DPMS ON
Green
DPMS STANDBY
The green light is flashing
DPMS OFF
Red
3.1.1 OSD Main Menu: Push the MENU Key
3.1.2 Select Input Source
3.1.3 Contrast/Brightness - Submenu
3.1.4 Geometry Menu
3.1.5 Color Temperature - Submenu
3.1.6 RGB Color - Submenu
3.1.7 Language - Submenu
3.1.8 OSD Manager - Submenu
3.1.9 Auto Config - Submenu
3.1.10 Mode Information - Submenu
3.1.11 Memory Recall - Submenu
3.1.12 Exit Menu - Submenu
3.1.13 OSD Lock
At the same time, press the “Right” & “Left” keys to lock the key.
At the same time, press “Right” & “Left” keys to unlock the key.
3.2 Touch Drivers
The T/S driver CD-ROM is in the accessory box and comes with the product, and is
also available online at the Advantech website as follows:
http://www.advantech.com.cn/products/ITM-5117/mod_5ABE2947-4D54-47509B04-9B64D334B4CC.aspx
Appendix
A
Troubleshooting
A
A.1 Introduction
If experiencing trouble with the monitor, or it fails to operate correctly, please refer to
the following instructions before calling the Advantech service center. If unable to correct the faults using the instructions below, then please contact the distributor or the
services/repair center.
A.2 Troubleshooting
No Images Appears On Screen
Check to see that all the I/O and power connectors are installed correctly and
connected. (Refer to 3.2, Connecting the Display)
Make sure that none of the connectors are crooked, broken or loose.
Make sure that the OSD power on the LED is turned on.
Make sure that the brightness is not in the minumum.
Make sure that the screen resolution is set to the correct setting for the type of
LCD, and that the setting does not exceed the resolution specified for the particular model of LCD.
The image is incorrectly displayed, or the full screen image does not appear
Please make sure the screen resolution on the motherboard is correct.
The position of screen is not in the center
Adjust the H-position and V-position or perform “Auto-Tune”.
Out of range
When the message “Out of Range” appears onscreen, it indicates that the signal of the computer is not compatible with the LCD display; i.e. the resolution
exceeds the specified resolution for the LCD.
Adjust the BIOS setting to match the correct resolution.
No signal
The display is powered on, but can neither receive or display any signal from
the computer. Check all power switches, power cables and VGA signal cables
to ensure that all are connected correctly on both sides.
Going to sleep
If the system goes to sleep, then the display has either been set to power-saving mode, or the display is experiencing a sudden signal disconnection problem.
Check the BIOS system settings, and/or Windows configuration. Then check
the connection of the power cable to computer on both sides.
www.advantech.com
Please verify specifications before quoting. This guide is intended for reference
purposes only.
All product specifications are subject to change without notice.
No part of this publicati on may be reproduced in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission of the publisher.
All brand and product names are trademarks or registered trademarks of their
respective companies.
© Advantech Co., Ltd. 2012