Open Field Network CC-Link/LT Compatible Product Catalog

Open Field Network
CC-Link/LT Compatible Product Catalog
Precautions for Choosing the Products
For safe use
To use the products given in this catalog properly, always read the "manuals" before
starting to use them.
This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in a device
or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric power,
aerospace, medicine or passenger movement vehicles, consult with Mitsubishi.
This product has been manufactured under strict quality control. However, when
installing the product where major accidents or losses could occur if the product fails,
install appropriate backup or failsafe functions in the system.
Mitsubishi will not be held liable for damage caused by factors found not to be the cause
of Mitsubishi; machine damage or lost profits caused by faults in the Mitsubishi products;
damage, secondary damage, accident compensation caused by special factors
unpredictable by Mitsubishi; damages to products other than Mitsubishi products; and to
other duties.
Country/Region Sales office
Tel/Fax
U.S.A
Mitsubishi Electric Automation Inc.
500 Corporate Woods Parkway Vernon Hills, IL 60061
Tel : +1-847-478-2100
Fax : +1-847-478-0328
Brazil
MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda.
Av. Rio Branco, 123-15 ,and S/1507, Rio de Janeiro, RJ CEP 20040-005, Brazil
Tel : +55-21-221-8343
Fax : +55-21-221-9388
Germany
Mitsubishi Electric Europe B.V. German Branch
Gothaer Strasse 8 D-40880 Ratingen, GERMANY
Tel : +49-2102-486-0
Fax : +49-2102-486-717
U.K
Mitsubishi Electric Europe B.V. UK Branch
Travellers Lane, Hatfield, Herts., AL10 8XB,UK
Tel : +44-1707-276100
Fax : +44-1707-278695
Italy
Mitsubishi Electric Europe B.V. Italian Branch
Centro Dir. Colleoni, Pal. Perseo - Ingr.2
Via Paracelso 12, 20041 Agrate B., Milano, Italy
Tel : +39-039-60531
Fax : +39-039-6053312
Spain
Mitsubishi Electric Europe B.V. Spanish Branch
Carretera de Rubi 76-80
08190 Sant Cugat del Valles, Barcelona, Spain
Tel : +34-935-653135
Fax : +34-935-891579
South Africa
Circuit Breaker Industries LTD
Tel : +27-11-928-2000
Private Bag 2016, Isando 1600, Johannesburg, South Africa
Fax : +27-11-392-2354
Hong Kong
Ryoden Automation Ltd.
10th Floor, Manulife Tower, 169 Electric Road, North Point, HongKong
Tel : +852-2887-8870
Fax : +852-2887-7984
China
Ryoden International Shanghai Ltd.
3F Block5 Building Automation Instrumentation Plaza 103
Cao Bao Rd. Shanghai 200233 China
Tel : +86-21-6475-3228
Fax : +86-21-6484-6996
Taiwan
Setsuyo Enterprise Co., Ltd.
6F., No.105 Wu-Kung 3rd.RD, Wu-Ku Hsiang, Taipei Hsine, Taiwan
Tel : +886-2-2299-2499
Fax : +886-2-2299-2509
Korea
HAN NEUNG TECHNO CO., LTD.
1F Dong Seo Game Channel Bldg., 660-11,Deungchon-dong Kangsec-ku,
Seoul, Korea
Tel : +82-2-3660-9552
Fax : +82-2-3664-8372
Singapore
Mitsubishi Electric Asia Pte, Ltd.
307 Alexandra Road #05-01/02,
Mitsubishi Electric Bulding Singapore 159943
Tel : +65-473-2480
Fax : +65-476-7439
Thailand
F. A. Tech Co.,Ltd.
898/28,29,30 S.V.City Building, Office Tower 2, Floor
17-18 Rama 3 Road, Bangkpongpang, Yannawa, Bangkok 10120
Tel : +66-2-682-6522
Fax : +66-2-682-6020
Indonesia
P.T. Autoteknindo SUMBER MAKMUR
Jl. Muara Karang Selatan Blok a Utara No.1 Kav.
No.11 Kawasan Industri/Pergudangan Jakarta-Utara 14440
Tel : +62-21-663-0833
Fax : +62-21-663-0832
India
Messung Systems Put,Ltd.
Electronic Sadan NO:111 Unit No15, M.I.D.C BHOSARI,PUNE-411026,India
Tel : +91-20-7128927
Fax : +91-20-7128108
Australia
Mitsubishi Electric Australia Pty. Ltd.
348 Victoria Road, PostalBag, No 2, Rydalmere, N.S.W 2116, Australia
Tel : +61-2-9684-7777
Fax : +61-2-9684-7245
Open Field Network
CC-Link/LT Compatible Product Catalog
Handy
Easy
He
nc
e
Ligh
its
t , T h i s i s " LT " !
ELECTRIC CORPORATION
HEAD OFFICE: 1-8-12,OFFICE TOWER Z 14F HARUMI CHUO-KU 104-6212,JAPAN
NAGOYA WORKS: 1-14,YADA-MINAMI 5,HIGASHI-KU,NAGOYA,JAPAN
When exported from Japan, this manual does not require application to the
Ministry of International Trade and Industry for service transaction permission.
Mitsubishi Electric Corporation Nagoya Works is a factory certified for ISO14001 (standards for environmental
management systems) and ISO9001 (standards for quality assurance management systems)
New publication,effective Aug. 2002
Specifications subject to change without notice.
Printed in Japan on recycled paper.
L(NA)-08026E-A 0208(MEE)
http://www.nagoya.melco.co.jp/english/
O p e n
L i n k
o f
W i re - s a v i n g
N e t w o r k s
Inheriting The Global Standard CC-Link
LT Makes Its Debut.
As a Japan-originated open field network, CC-Link is establishing track records on a global basis.
Fully inheriting the CC-Link concept, CC-Link/LT
CC-Link/L makes its debut.
INDEX
Overview of Networks Provided by Mitsubishi
4
CC-Link Family
6
Features of CC-Link/LT
8
System Configuration Examples
10
Application Examples
12
CC-Link/LT exhibits
CC-Link/L
For use in machines such as semiconductor manufacturing and material handling, CC-Link/LT
its overwhelming performance including reduced wiring and fast link scans.
CCMitsubishi has a wide variety of wire-saving network modules compatible with CC-Link/LT.
Mitsubishi is developing the open network possibilities of CC-Link/L
CC-Link/LT that is optimum for reduced
wiring and I/O point distribution.
PRODUCT INFORMATION
Master Modules
14
Remote I/O Modules
16
Power Supply Adaptor
30
Accessories
30
Software
31
CC-Link/LT Dedicated Communication LSIs
31
TECHNICAL INFORMATION
CC-Link/LT expands the range of open network
possibilities to the far end of the plant floor.
CC-Link/LT-Specifications
32
Network Wiring Specifications
32
Cable Specifications
33
General Specifications
33
Power Supply Adaptor Installation
34
CC-Link Partner Association
36
CC-Link/LT Related Product Model List
38
Adding CC-Link/LT compatible products,
Mitsubishi provides a total network solution.
From information management to production control, machine control, device and I/O control ...
Looking ahead to network interconnection in all of these layers,
Mitsubishi has presented one product after another that are compatible with not only Ethernet
but also MELSECNET/H and CC-Link.
Now, Mitsubishi provides CC-Link/LT compatible, wire-saving network modules to achieve
seamless network integration in all layers of Factory Automation system topology.
Mitsubishi’s total network solution is in full development towards dynamic production activities.
Ethernet
Plant Level
(Information management)
MELSECNET/H
Controller Level
(Production control)
CC-Link
Field Level
(Machine control)
CC-Link/LT
Sensor Level
(Device, I/O control)
4
5
To expand open network possibilities to every corner of a field.
"LT" further reinforces the CC-Link family.
As the Japan-originated global standard, CC-Link is increasing the range of field network
possibilities.
"If we could seamlessly network the control field that ranges from machine control to device
and I/O control in the integrated concept of CC-Link..."
The reinforced CC-Link family is a new answer to such a request from the plant floor.
For machine control inside a line
CC-Link is a high-speed field network that can handle both
control and information together. At high communication
speed of 10Mbps, it is compatible with 100m transmission
distance and up to 64 connectable stations. Thanks to this
overwhelming performance, CC-Link was certified for
SEMI standard and is accelerating its openness.
Fast communication Communication distance (100m to 1,200m) Improved workability
by repeaters (T branch, optical, optical/spatial) Wide choice of partner maker products
Fast cyclic transmission, large-capacity transient transmission (message data)
Partner products
CC-Link/LT is a reduced-wiring network for use inside
a panel/machine, designed to relieve on-site workers
from complicated wiring, miswiring, etc. It is a practical
solution for reducing wiring between sensors, actuators
and controllers. Also, it utilizes the high performance of
CC-Link such as fast response.
Fast response Ease of working by connection of connectors Ease of extension and addition
Communication and power supply lines are integrated into one line.
2-, 4-, 8- and 16-point remote I/O units are available.
For networking inside a panel/machine
Intelligent device stations
Remote device stations
CC-Link/LT master station
RUN
ERR.
L RUN
L ERR.
SD
RD
IN 0 1 2
3 4 5
6 7
10 11 12
13 14 15
16 17
FX2N-32MR
Q61P-A1
POWER
Q25HCPU
MODE
QJ61CL12
SW
QJ71C24
QJ61BT11
ON
1
2
3
B RATE 4
5
MODE 6
7
TEST 8
NPO
PULL
FX2N-64CL-
M
Remote I/O stations
QX10
RUN
ERR
USER
BAT
BOOT
PULL
0 1 2
3 4 5
6 7
11 12 13
14 15 16
17
IN 10
POWER
POWER
RUN
BATT.V
PROG.E
CPU.E
QJ71LP21-25
Remote I/O stations
USB
1Y
2-T
1D
2S
CO
MM
.
RS-232
S
40 TA
20 TIO
10 N
8 NO
4 .
2
1
CL
HLD
PW L
RUN
0
1
T 4V
IN OU Y0 +2
24G
IN
X0
CL2X8-D1C3V
1234567
8
ST.No.
ON
LINK/PW
Repeater modules
Partner products
PW
CL2Y8-TP1B
L RUN L ERR.
2
0
1
2
3
4
5
6
7
ON
OUT
Y0
Y1
Y2
Y3
40 20 10
8 4 2
STATION NO.
1 0.5ms
1.5ms
Y4
Y5
Y6
Y7
CC-Link master station
CC-Link-CC-Link/LT bridge
A1S62P
A2USCPU
POWER
A1SP60
STOP
RUN
L.CLR
ERROR
RESET
RUN
A1SP60
A1SJ61BT11
A1SJ61BT11
RESET
AD35ID1
Soon to be released
PW
CC-Link
L RUN L ERR.
CC-Link/LT
L RUN L ERR.
L ERR.
CC-Link
STATION NO.
40 20 10
8 4 2
1 2
AJ65SBT-C
LB
ON
3
4
5
6
1
B RATE
4
CC-Link/LT
NOS TST
MODE B
RATE NC
2 1 2
1
2 1 2 1
7 8 9 10
1 2 3 4
5 6 7 8
RUN
ERR.
L RUN
L ERR.
SD
RD
CC-Link
IN 0 1 2
3 4 5
6 7
10 11 12
13 14 15
16 17
CC-Link/LT
FX2N-32MR
0 1 2
3 4 5
6 7
11 12 13
14 15 16
17
IN 10
POWER
POWER
RUN
BATT.V
PROG.E
CPU.E
FX2N-16CC
L-M
RUN
ERR.
L RUN
L ERR.
SD
RD
RD
6
7
The Factory Automation industry was waiting for this performance.
CC-Link/LT meets the requirements set out from the industry.
Extreme ease of working
Miswiring prevention
Openness of the original
CC-Link family
CC-Link/LT is an open network similar to CC-Link.
You can make flexible choice of the optimum devices
from multi-vendors to improve the flexibility of system
construction.
Wiring is reduced in panels, devices and machineincorporated systems.
Cables shaped to prevent miswiring
The surface of each flat cable has a
different shape, the cable will not fit in the
connector if reversed.
Connector with miswiring checking window
The orange wire is visible when inserted the
wrong way.
Orange indicates NG.
The dedicated connectors achieve quick connection/
disconnection of communication cables. Units can be
increased, added and replaced easily.
The dedicated flat cables are used, enabling the reduction
of working man-hours and cable costs.
Commercially available pliers can be used for assembling
connectors.
Sn
ap
Fast response
When 64 stations are connected, link scan time is a
maximum of 1.2ms (at 2.5Mbps), achieving excellent
fast response performance.
You can choose any of 2.5Mbps, 625kbps and 156kbps
according to transmission distance.
No need to make parameter setting
Link scan time
Troublesome network parameter setting is unnecessary.
Only the communication speed setting is required for the
master module only. There is no need to set the
communication speed on the remote station.
CC-Link/LT link scan time (at 2.5Mbps)
Link scan time (
2.5
16-point mode
2.0
8-point mode
ms
)
1.5
X000000000
X000000000
Y000000000
Y000000000
D000000000
D000000000
X000000000
X000000000
Y000000000
Y000000000
D000000000
D000000000
X000000000
X000000000
High noise resistance
4-point mode
1.0
For noise resistance, CC-Link/LT also inherits
the feature of CC-Link.
0.5
0
0
20
40
60
Number of
stations
Efficient use of I/O points
The adoption of the point mode (4, 8, 16 points) enables
I/O assignment without wasting surplus I/O points.
Strong lineup
Units from 2 and 4 points to 8 and 16 points are available. You can select the
optimum type from the strong lineup such as terminal block, sensor connector,
MIL connector and cable types.
8
Ease of Use
You can perform programming in the same manner as
when accessing proximate I/O, without being conscious
of the network.
9
System Configuration Examples
CC-Link/LT
P.14
master module
RUN
ERR.
L RUN
L ERR.
SD
RD
IN 0 1 2
3 4 5
6 7
10 11 12
13 14 15
16 17
FX2N-32M
R
0 1 2
3 4 5
6 7
11 12 13
14 15 16
17
IN 10
PW
POWER
CC-Link
L RUN L ERR.
CC-Link/LT
L RUN L ERR.
L ERR.
FX2N-64C
L-M
AJ65SBT-CLB
P.26
CC-Link
STATION NO.
40 20 10
8 4 2
1 2
POWER
RUN
BATT.V
PROG.E
CPU.E
MIL connector type
remote I/O modules
Sensor connector
P.24
type remote I/O modules
CC-Link-CC-Link/LT
bridge module
ON
3
4
5
6
B RATE
CC-Link/LT
NOS
TST MODE B
4 2 1
RATE NC
2 1
2 1 2 1
7 8 9 10
1 2 3 4
5 6 7 8
1
IN
CL2X8-D1C3V
IN
1234567
8
ST.No.
ON
CL2X16-D1M
1V
1234567
8
ST.No.
LINK/PW
ON
LINK/PW
CC-Link
CC-Link/LT
Q61P-A1
POWER
Q25HCPU
PW
QX10
L RUN
QJ61CL12
MODE
QJ71C24
RUN
ERR
USER
QJ61BT11
L ERR.
QJ71LP21-25
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
BAT
BOOT
SW
1
NPO 2
3
B RATE 4
5
MODE 6
7
TEST 8
PULL
PULL
ON
AJ65SBT-CLB
FX2N-64CL-M
Soon to be released
Soon to be released
USB
RS-232
OUT
QJ61CL12
ST.No.
*Always install the master module at one end of the main line.
LINK/PW
General-purpose
power supply
Terminating resistor
CL9-RYVK
CL2Y8-TP1C2
V
1234567
8
ON
8 points
CL2X8-D1C3V
24VDC input
CL2Y8-TP1C2V
0.1A transistor output
with output protection
OUT
PW
L RUN
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Power supply adaptor
P.30
24G
P.30
+24V
Dedicated
flat cable
Connector
Open
sensor connector
P.30
ON
L ERR.
24VDC
P.30
CL2Y16-TP1M1
V
1234567
8
ST.No.
LINK/PW
16 points
CL2X16-D1M1V
24VDC input
CL2Y16-TP1M1V
0.1A transistor output
with output protection
POWER
CL1PAD1
LINK
DB
DA
ECN-*****
+24V
24G
POWER
CL1PAD1
LCNET/
POWER
LINK
DB
DA
CL9-CNF-18
LCNET/
POWER
Power supply adaptor
(when added)
CL1PAD1
CL9-FL4-18
24G
DB
DA
+24V
General-purpose
power supply
CL1PAD1
24G
DB
DA
+24V
DC24V
Terminating
resistor
P.30
CL9-RYVK
CL2Y8-TP1B
L RUN L ERR.
2
0
1
2
3
4
5
6
7
ON
OUT
Y0
Y1
Y2
Y3
40 20 10
8 4 2
STATION NO.
1 0.5ms
1.5ms
Y4
Y5
Y6
Y7
Soon to be released
10
.
MM
3S
1D
1X
2-D
S
40 TA
20 TIO
10 N
8 NO
4 .
2
1
RUN
0
1
T 4V
IN OU Y0 +2
24G
X0
2S
PW
Made by Mitsubishi Electric Engineering Co., Ltd.
PW L
1D
Soon to be released
HLD
2-T
EHLT01
8 points
CL2X8-D1B2
24VDC input
CL2Y8-TP1B2
0.1A transistor output
with output protection
CL1XY8-DT1B2
24VDC input/
0.1A transistor output
CL1XY8-DR1B2
24VDC input/2A relay output
CL
X0
X1
X2
X3
1Y
3
CL
2
STATION NO.
CO
1
ON
.
0
2 points
CL1X2-D1D3S
24VDC input
CL1Y2-T1D2S
0.1A transistor output
CL1XY2-DT1D5S
24VDC input/
0.1A transistor output
4 points
CL1X4-D1B2
24VDC input
CL1Y4-T1B2
0.1A transistor output
CL1Y4-R1B2
2A relay output
L RUN L ERR.
IN
Cable type
P.28
remote I/O modules
MM
PW
P.18
HLD
S
40 TA
20 TIO
10 N
8 NO
4 .
2
1
Terminal block type
remote I/O modules
CO
Handy line tester
PW L
RUN
0
1
T 4V
IN OU Y0 +2
24G
X0
4 points
24VDC input/0.1A transistor output
24VDC input/2A relay output
11
Application Examples
Machine-incorporated system example using
Semiconductor manufacturing equipment
System example combining
and
Automated warehouse
Bridge
Improved workability by repeaters
12
Easy connector plugging
Wiring cost reduction
The dedicated flat cable and connector
ensure ease of adding a module.
Wiring costs can be reduced
substantially by combining the
communication and power supply
lines into a single cable.
Reduced wiring/space saving
Wide assortment of I/O modules
T-branch connection and compact
modules save wiring and space in
equipment.
Terminal block, sensor connector,
MIL connector and cable types are
available.
There are a wide assortment of
2-, 4-, 8- and 16-point units.
CC-Link-CC-Link/LT bridge for seamless communication
Workability of high degree of flexibility
can be realized by optical/spatial
repeaters, optical repeaters and
repeaters (T branch).
Data can be sent/received seamlessly from the
host controller and monitoring/diagnostics can
be performed using GX Developer.
Connection of various devices
Ease of connecting various sensors
A wide variety of controllers and I/O
units can be connected, e.g. inverters,
servos, analog units and ID controllers.
The adoption of the open sensor connector
ensures ease of connecting sensors, etc.
Wide selection of partner products
Improved maintainability
You can choose the optimum device
from among many partner products to
construct a system with a high degree
of flexibility.
The dedicated flat cable and connector
ensure flexible response to addition and
modification.
13
PRODUCT INFORMATION
Master Modules
Master Modules
Master
QJ61CL12 Master Module (Q Series)
Overview
Master modules compatible with the MELSEC CPUs are available.
External dimensions
For Q series
QJ61CL12
For FX series
FX 2N -64CL-M
QJ61CL12
Soon to be released
Product explanation
Next page
LINK
Model List
QJ61CL12
Model
QJ61CL12
Master module for FX series
FX2N-64CL-M
Relevant Manual
Current consumption: 130mA (5VDC), 28mA (24VDC),
power supplied from power supply adaptor
Weight: 0.09kg
Point Mode Setting
CC-Link/LT has adopted a new design called the "point mode".
The point mode is designed not to produce unnecessary empty points in order
to use the I/O points efficiently.
There are three different point mode, 4-, 8- and 16-point mode. If the occupied
I/O point setting is the same, the number of controllable I/O points changes
depending on the point mode.
The table on the right indicates the relationships between the master module’s
number of occupied I/O points, point mode and number of connectable
stations.
If the remote I/O unit is the same, the number of occupied stations changes
depending on the point mode.
<For 16-point unit>
4-point mode: 4 stations occupied, 8-point mode: 2 stations occupied,
16-point mode: 1 station occupied
System configuration example
Which point mode to be selected depends on the number of used remote
stations (I/O units). As a rule of thumb, select the I/O point mode used by the
majority of remote modules in the system in order to reduce surplus occupied
I/O points.
A point mode setting example is given below.
Unit whose occupied points are 2 points ... 1 module (station 4))
Unit whose occupied points are 4 points ... 4 modules (stations 1), 3), 6), 7))
Unit whose occupied points are 8 points ... 1 module (station 2))
Unit whose occupied points are 16 points ... 1 module (station 5))
Since there are the largest number of 4-point I/O units in this example,
selection of the 4-point mode produces no surplus I/O points.
QJ61 Input/
CL12 output
Number of Master Module’s 16
32
48
64
128
256
Points Points Points Points Points Points
Occupied I/O points
4-point mode
Point
mode 8-point mode
setting
16-point mode
8
12
16
32
64
-
2
4
6
8
16
32
64
-
1
2
3
4
8
16
32
64
4-point mode: Up to 64 stations can be connected.
8-point mode: Up to 32 stations can be connected.
16-point mode: Up to 16 stations can be connect
Station 6)
4 points
Q02CPU,Q02HCPU,Q06HCPU,Q12HCPU,Q25HCPU
Q00JCPU*2,Q00CPU,Q01CPU
Q12PHCPU,Q25PHCPU
QJ72LP25-25,QJ72LP25G(E),QJ72BR15
PPC-CPU686(MS)-64, PPC-CPU686(MS)-128
Max. 64 1
*
modules
*1:The number of usable master modules changes depending
on the occupied I/O point setting of the master module.
*2:Having a maximum of 256 I/O points, the Q00JCPU can use
only the I/O points within the 256-point range.
(When the occupied I/O point setting is more than 256 points,
the Q00JCPU detects an error and does not operate.)
*3:The PC CPU is made by CONTEC CO., LTD.
QJ61CL12
LED indications
LED Name
8-point mode (8 points/station)
4-point mode (4 points/station)
16-point mode (16 points/station)
Number of occupied I/O points: 48 points Number of occupied I/O points: 64 points Number of occupied I/O points: 128 points
Total number of stations: 8 stations
Total number of stations: 12 stations
Total number of stations: 8 stations
X /Y 0 1) 4 points
X /Y 0 1) 4 points
X /Y 0 1) 4 points
1 station
X /Y 10
2) 8 points
2 stations
3) 4 points
4) 2 points
1 station
Empty, 2 points
1 station
Empty, 4 points
Empty, 12 points
2) 8 points
X /Y 10
3) 4 points
Empty, 4 points
4) 2 points
5) 16 points
1 station
4 points
Empty, 6 points
X /Y 10
1 station
2) 8 points
1 station
Empty, 8 points
L RUN
L ERR.
SD
RD
1 station
7) 4 points
1 station
Empty, 4 points
1 station
5) 16 points
2 stations
Number of
occupied I/O points 16 points
1 station
1
Empty, 12 points
X /Y 30
6) 4 points
LED
Operation setting switch setting details
X /Y 20
3) 4 points
6) 4 points
Description
On: Module is operating normally.
On: Switch setting error
Flicker: Switch moved during operation
On: Data link in execution
On: Data link error station (detected), any station outside control range
Flicker: Data link error stations (all stations)
On: Data being sent
On: Data being received
1 station
X /Y 20
X /Y 20
1 station
RUN
ERR.
1 station
X /Y 30
2
4) 2 points
1 station
Empty, 14 points
1 station
1 station
X /Y 40
5) 16 points
X /Y 50
1 station
6) 4 points
Empty, 12 points
Station 7)
4 points
QCPU High Performance model
QCPU Basic model
Process CPU
NET/H remote station
PC CPU *3
Number of Mountable Modules
Part Names and Settings
Station 5)
16 points
Station 4)
2 points
-
Connectable CPU Models
Example: When the number of occupied I/O points of the master module is 256
Empty, 4 points
Station 3)
4 points
512
1024
Points Points
4
Empty, 4 points
Station 2)
8 points
Unit: mm
Applicable CPU
Number of stations that can be connected for each setting of master module
7) 4 points
Station 1)
4 points
90
27.4
QJ61CL12 CC-Link/LT Master Module User’s Manual (Details)
1 station
Operation setting switches
Product
Master module for Q series
Power Q
supply CPU
ON
98
SW
1
I/O
2
POINTS
3
4
B RATE
5
6
MODE
7
TEST 8
I/O
POINTS
3
Transmission
speed setting
4
5
B RATE
Point mode setting
6
7
MODE
Test mode
X /Y 60
7) 4 points
8
1 station
TEST
32 points
48 points
64 points
OFF
ON
OFF
ON
128 points 256 points 512 points 1024 points
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
625Kbps
2.5Mbps
Must not be set *
OFF
ON
OFF
ON
OFF
OFF
ON
ON
8 points
4 points
16 points
Must not be set *
OFF
ON
OFF
ON
OFF
OFF
ON
ON
156Kbps
OFF: ON LINE (normal operation)
ON: TEST mode (loopback test)
*ERR. LED is lit if the switches are moved to the position that must not be set.
SW
1
I/O
2
POINTS
3
4
B RATE
5
6
MODE
7
TEST 8
ON
Operation
setting switches
CC-Link/LT
interface connector
LINK
Pin No. Signal Name
4
24G
3
DB
2
DA
1
+24V
Empty, 12 points
X /Y70
Empty, 16 points
14
1 station
15
PRODUCT INFORMATION
Master Modules
Master Modules
Master
QJ61CL12 Master Module (Q Series)
Overview
Master modules compatible with the MELSEC CPUs are available.
External dimensions
For Q series
QJ61CL12
For FX series
FX 2N -64CL-M
QJ61CL12
Soon to be released
Product explanation
Next page
LINK
Model List
QJ61CL12
Model
QJ61CL12
Master module for FX series
FX2N-64CL-M
Relevant Manual
Current consumption: 130mA (5VDC), 28mA (24VDC),
power supplied from power supply adaptor
Weight: 0.09kg
Point Mode Setting
CC-Link/LT has adopted a new design called the "point mode".
The point mode is designed not to produce unnecessary empty points in order
to use the I/O points efficiently.
There are three different point mode, 4-, 8- and 16-point mode. If the occupied
I/O point setting is the same, the number of controllable I/O points changes
depending on the point mode.
The table on the right indicates the relationships between the master module’s
number of occupied I/O points, point mode and number of connectable
stations.
If the remote I/O unit is the same, the number of occupied stations changes
depending on the point mode.
<For 16-point unit>
4-point mode: 4 stations occupied, 8-point mode: 2 stations occupied,
16-point mode: 1 station occupied
System configuration example
Which point mode to be selected depends on the number of used remote
stations (I/O units). As a rule of thumb, select the I/O point mode used by the
majority of remote modules in the system in order to reduce surplus occupied
I/O points.
A point mode setting example is given below.
Unit whose occupied points are 2 points ... 1 module (station 4))
Unit whose occupied points are 4 points ... 4 modules (stations 1), 3), 6), 7))
Unit whose occupied points are 8 points ... 1 module (station 2))
Unit whose occupied points are 16 points ... 1 module (station 5))
Since there are the largest number of 4-point I/O units in this example,
selection of the 4-point mode produces no surplus I/O points.
QJ61 Input/
CL12 output
Number of Master Module’s 16
32
48
64
128
256
Points Points Points Points Points Points
Occupied I/O points
4-point mode
Point
mode 8-point mode
setting
16-point mode
8
12
16
32
64
-
2
4
6
8
16
32
64
-
1
2
3
4
8
16
32
64
4-point mode: Up to 64 stations can be connected.
8-point mode: Up to 32 stations can be connected.
16-point mode: Up to 16 stations can be connect
Station 6)
4 points
Q02CPU,Q02HCPU,Q06HCPU,Q12HCPU,Q25HCPU
Q00JCPU*2,Q00CPU,Q01CPU
Q12PHCPU,Q25PHCPU
QJ72LP25-25,QJ72LP25G(E),QJ72BR15
PPC-CPU686(MS)-64, PPC-CPU686(MS)-128
Max. 64 1
*
modules
*1:The number of usable master modules changes depending
on the occupied I/O point setting of the master module.
*2:Having a maximum of 256 I/O points, the Q00JCPU can use
only the I/O points within the 256-point range.
(When the occupied I/O point setting is more than 256 points,
the Q00JCPU detects an error and does not operate.)
*3:The PC CPU is made by CONTEC CO., LTD.
QJ61CL12
LED indications
LED Name
8-point mode (8 points/station)
4-point mode (4 points/station)
16-point mode (16 points/station)
Number of occupied I/O points: 48 points Number of occupied I/O points: 64 points Number of occupied I/O points: 128 points
Total number of stations: 8 stations
Total number of stations: 12 stations
Total number of stations: 8 stations
X /Y 0 1) 4 points
X /Y 0 1) 4 points
X /Y 0 1) 4 points
1 station
X /Y 10
2) 8 points
2 stations
3) 4 points
4) 2 points
1 station
Empty, 2 points
1 station
Empty, 4 points
Empty, 12 points
2) 8 points
X /Y 10
3) 4 points
Empty, 4 points
4) 2 points
5) 16 points
1 station
4 points
Empty, 6 points
X /Y 10
1 station
2) 8 points
1 station
Empty, 8 points
L RUN
L ERR.
SD
RD
1 station
7) 4 points
1 station
Empty, 4 points
1 station
5) 16 points
2 stations
Number of
occupied I/O points 16 points
1 station
1
Empty, 12 points
X /Y 30
6) 4 points
LED
Operation setting switch setting details
X /Y 20
3) 4 points
6) 4 points
Description
On: Module is operating normally.
On: Switch setting error
Flicker: Switch moved during operation
On: Data link in execution
On: Data link error station (detected), any station outside control range
Flicker: Data link error stations (all stations)
On: Data being sent
On: Data being received
1 station
X /Y 20
X /Y 20
1 station
RUN
ERR.
1 station
X /Y 30
2
4) 2 points
1 station
Empty, 14 points
1 station
1 station
X /Y 40
5) 16 points
X /Y 50
1 station
6) 4 points
Empty, 12 points
Station 7)
4 points
QCPU High Performance model
QCPU Basic model
Process CPU
NET/H remote station
PC CPU *3
Number of Mountable Modules
Part Names and Settings
Station 5)
16 points
Station 4)
2 points
-
Connectable CPU Models
Example: When the number of occupied I/O points of the master module is 256
Empty, 4 points
Station 3)
4 points
512
1024
Points Points
4
Empty, 4 points
Station 2)
8 points
Unit: mm
Applicable CPU
Number of stations that can be connected for each setting of master module
7) 4 points
Station 1)
4 points
90
27.4
QJ61CL12 CC-Link/LT Master Module User’s Manual (Details)
1 station
Operation setting switches
Product
Master module for Q series
Power Q
supply CPU
ON
98
SW
1
I/O
2
POINTS
3
4
B RATE
5
6
MODE
7
TEST 8
I/O
POINTS
3
Transmission
speed setting
4
5
B RATE
Point mode setting
6
7
MODE
Test mode
X /Y 60
7) 4 points
8
1 station
TEST
32 points
48 points
64 points
OFF
ON
OFF
ON
128 points 256 points 512 points 1024 points
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
625Kbps
2.5Mbps
Must not be set *
OFF
ON
OFF
ON
OFF
OFF
ON
ON
8 points
4 points
16 points
Must not be set *
OFF
ON
OFF
ON
OFF
OFF
ON
ON
156Kbps
OFF: ON LINE (normal operation)
ON: TEST mode (loopback test)
*ERR. LED is lit if the switches are moved to the position that must not be set.
SW
1
I/O
2
POINTS
3
4
B RATE
5
6
MODE
7
TEST 8
ON
Operation
setting switches
CC-Link/LT
interface connector
LINK
Pin No. Signal Name
4
24G
3
DB
2
DA
1
+24V
Empty, 12 points
X /Y70
Empty, 16 points
14
1 station
15
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Icon Identification
Overview
A variety of modules are available for external connection equipment and applications.
Input
DC input
Sensor connector type
Terminal block type
Terminal
block
2
points
Output
Input power supply specification
DC input
Transistor output
2
points
Connection Form
Input power supply
specification
Number of input points
Others
Terminal block
Terminal block type
Input response
switching
With input response speed switching
Positive common input
Sensor
+COM
Sink
Positive common input
Sensor
Source
Negative common input
-COM
24VDC
2
For crimping terminal connection.
General connection method.
-wire type
0.1A
2
-wire type
Hold
MIL
Source type output
Input voltage
Connection wire type
Protection
Sensor connector type
Sink type output
Output load current
Connection wire type
MIL connector type
Cable
With overcurrent protection.
With overheat protection.
With output hold function
for communication error
or reset
Vertical
Vertical type
Cable type
Easy connection of sensors, etc.
Model List
MIL connector type
Cable type
Product
Cable
CL1X2-D1D3S
Input modules
MIL
Direct wiring to sensor, etc.
Model Identification
CL
2
3
4
1 Unit for CC-Link/LT
:1 or 2
2 Unit type
X: Input
Y: Output
XY: I/O hybrid
16
5
7
6
3 Total number of I/O points
2:
4:
8:
16:
2 points
4 points
8 points
16 points
4 I/O specifications
D1: 24VDC input
R1: Relay output 2A
T1: Transistor output 0.1A
TP1: Transistor output 0.1A
(with output protection)
DT1: 24VDC input/
transistor output 0.1A
DR1: 24VDC input/
relay output 2A
5 Connection form
B:
C:
M:
D:
Terminal block
Sensor connector
MIL connector
Cable type
1:
2:
3:
5:
22
points
-wire type
DC input
4
points
+COM
points
+COM
DC input
8
+COM
DC input
+COM
points
24VDC
-wire type
or
24VDC
3
4
8
2A
16
points
+COM
4
points
+COM
-COM
2
-wire type
24VDC
2
-COM
DC input
24VDC
points
or
24VDC
3
-wire type
Input response
switching
Vertical
Input response
switching
Vertical
Transistor output
1
points
Relay output
points
points
4
Sink
Hold
Terminal block
Hold
Terminal block
Hold
Terminal block
Protection
Hold
0.1A
Sensor
Protection
Hold
Vertical
0.1A
MIL
Protection
Hold
Vertical
27
20
20
21
-wire type
1
25
29
-wire type
2
25
27
-wire type
Sink
0.1A
2
point
Transistor output
4
Sink
Cable
-wire type
0.1A
2
points
24VDC
2
Sink
points
Transistor output
4
Sensor
19
-wire type
2
points
8
DC input
Input response
switching
points
0.1A
2
points
Transistor output
CL2Y16-TP1M1V
CL1XY8-DR1B2
Sink
points
Transistor output
0.1A
2
Relay output
CL2Y8-TP1B2
CL1XY8-DT1B2
Sink
points
4
+COM
19
-wire type
Transistor output
point
28
Terminal block
MIL
24VDC
2
1
Input response
switching
-wire type
Transistor output
DC input
Terminal block
-wire type
CL1Y4-R1B2
CL1XY2-DT1D5S
Input response
switching
-wire type
1
16
Page
Cable
-wire type
2
points
3
24VDC
2
-COM
or
24VDC
24VDC
2
-COM
DC input
8
24VDC
CL2Y8-TP1C2V
S:Ultracompact
V: Vertical type
None: Normal type
(horizontal type)
1-wire type
2-wire type
2- or 3-wire type
Input 2 or 3-wire type, output 2-wire type
CL2X8-D1C3V
2
+COM
CL1Y4-T1B2
7 Shape
6 Wire type
CL2X8-D1B2
Function Outline
DC input
CL1Y2-T1D2S
I/O modules
1
CL1X4-D1B2
CL2X16-D1M1V
Output modules
Compact type remote I/O units
Easy to do wiring work and convenient
when device is located nearby.
Model
Sink
0.1A
2
Hold
Terminal block
Hold
Terminal block
Hold
points
2A
2
Cable
29
-wire type
22
22
-wire type
17
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Icon Identification
Overview
A variety of modules are available for external connection equipment and applications.
Input
DC input
Sensor connector type
Terminal block type
Terminal
block
2
points
Output
Input power supply specification
DC input
Transistor output
2
points
Connection Form
Input power supply
specification
Number of input points
Others
Terminal block
Terminal block type
Input response
switching
With input response speed switching
Positive common input
Sensor
+COM
Sink
Positive common input
Sensor
Source
Negative common input
-COM
24VDC
2
For crimping terminal connection.
General connection method.
-wire type
0.1A
2
-wire type
Hold
MIL
Source type output
Input voltage
Connection wire type
Protection
Sensor connector type
Sink type output
Output load current
Connection wire type
MIL connector type
Cable
With overcurrent protection.
With overheat protection.
With output hold function
for communication error
or reset
Vertical
Vertical type
Cable type
Easy connection of sensors, etc.
Model List
MIL connector type
Cable type
Product
Cable
CL1X2-D1D3S
Input modules
MIL
Direct wiring to sensor, etc.
Model Identification
CL
2
3
4
1 Unit for CC-Link/LT
:1 or 2
2 Unit type
X: Input
Y: Output
XY: I/O hybrid
16
5
7
6
3 Total number of I/O points
2:
4:
8:
16:
2 points
4 points
8 points
16 points
4 I/O specifications
D1: 24VDC input
R1: Relay output 2A
T1: Transistor output 0.1A
TP1: Transistor output 0.1A
(with output protection)
DT1: 24VDC input/
transistor output 0.1A
DR1: 24VDC input/
relay output 2A
5 Connection form
B:
C:
M:
D:
Terminal block
Sensor connector
MIL connector
Cable type
1:
2:
3:
5:
22
points
-wire type
DC input
4
points
+COM
points
+COM
DC input
8
+COM
DC input
+COM
points
24VDC
-wire type
or
24VDC
3
4
8
2A
16
points
+COM
4
points
+COM
-COM
2
-wire type
24VDC
2
-COM
DC input
24VDC
points
or
24VDC
3
-wire type
Input response
switching
Vertical
Input response
switching
Vertical
Transistor output
1
points
Relay output
points
points
4
Sink
Hold
Terminal block
Hold
Terminal block
Hold
Terminal block
Protection
Hold
0.1A
Sensor
Protection
Hold
Vertical
0.1A
MIL
Protection
Hold
Vertical
27
20
20
21
-wire type
1
25
29
-wire type
2
25
27
-wire type
Sink
0.1A
2
point
Transistor output
4
Sink
Cable
-wire type
0.1A
2
points
24VDC
2
Sink
points
Transistor output
4
Sensor
19
-wire type
2
points
8
DC input
Input response
switching
points
0.1A
2
points
Transistor output
CL2Y16-TP1M1V
CL1XY8-DR1B2
Sink
points
Transistor output
0.1A
2
Relay output
CL2Y8-TP1B2
CL1XY8-DT1B2
Sink
points
4
+COM
19
-wire type
Transistor output
point
28
Terminal block
MIL
24VDC
2
1
Input response
switching
-wire type
Transistor output
DC input
Terminal block
-wire type
CL1Y4-R1B2
CL1XY2-DT1D5S
Input response
switching
-wire type
1
16
Page
Cable
-wire type
2
points
3
24VDC
2
-COM
or
24VDC
24VDC
2
-COM
DC input
8
24VDC
CL2Y8-TP1C2V
S:Ultracompact
V: Vertical type
None: Normal type
(horizontal type)
1-wire type
2-wire type
2- or 3-wire type
Input 2 or 3-wire type, output 2-wire type
CL2X8-D1C3V
2
+COM
CL1Y4-T1B2
7 Shape
6 Wire type
CL2X8-D1B2
Function Outline
DC input
CL1Y2-T1D2S
I/O modules
1
CL1X4-D1B2
CL2X16-D1M1V
Output modules
Compact type remote I/O units
Easy to do wiring work and convenient
when device is located nearby.
Model
Sink
0.1A
2
Hold
Terminal block
Hold
Terminal block
Hold
points
2A
2
Cable
29
-wire type
22
22
-wire type
17
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Terminal block
Terminal block type
CL1X4-D1B2 input module
Overview
Installation
Terminal block type
DIN rail or direct mounting can be done.
DC input
4
points
+COM
2
-COM
Terminal block
24VDC
Input response
switching
-wire type
External equipment connection diagram
External dimensions, terminal layout
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
50
CC-Link/LT
interface connector
10
Insulation
Small size in the industry’s smallest class
Terminal block cover has a nameplate that shows connection
destinations at a glance
Input modules used either as positive common or negative common
Terminal block that can connect 2-wire sensors and loads intact
ON
Common system
Unit
power
supply
Part Names and Functions
Voltage
Max. current
consumption
I/O operation indicator LEDs
ON: Lit
OFF: Extinguished
CL1X4-D1B2
CC-Link/LT
interface connector
Pin No.
4
3
2
1
IN
Signal Name
24G
DB
DA
+24V
1
2
LINK/PW
Setting Switch Name
Station STATION
number NO.
setting
switches
I/O
0.5ms
operation 1.5ms
setting
HLD
X1
X2
X3
18
49
40
DC
24A
X0
DC
24B
COMB
X1
COMB
X2
X3
DC input
8
points
+COM
-COM
24VDC
2
Terminal block
Input response
switching
-wire type
External dimensions, terminal layout
2- 4.5 mounting hole
(M4 mounting screw)
64
10
Insulation
1
2
3
4
Description
Tenth 40
digit
20
ON : 40
ON : 20
10
ON : 10
Unit
8
ON : 8
OFF : 0
digit
4
ON : 4
2
ON : 2
1
ON : 1
Input unit: Response speed setting
OFF: 1.5ms (standard type)
ON: 0.5ms (fast response type)
Output unit : Hold function valid
OFF: Output clear
ON: Output held
I/O hybrid unit: Hold function valid
OFF: Output clear
ON: Output held
DIN rail center
+24V
DA
DB
24G
DC DC
CL2X8-D1B2
I/O power supply
I/O interface terminal block (positive common)
24VDC
PW
0 1 2 3 4 5 6 7
L RUN L ERR.
ON
Detailed specifications
Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
ON
Terminal block
0.4
Unit: mm
CC-Link/LT
interface connector
OFF
Common system
DIN rail mounting hook
41.5
DC24A
DC24B
External equipment connection diagram
402010 8 4 2 1 0.5ms
STATION NO. 1.5ms
X0
X3
22
ON
X2
Unit
power
supply
Voltage
Max. current
consumption
Weight (kg)
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
100%(24VDC)
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
8 points/1 common (4 points)
(terminal block 2-wire type)
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
40mA or less (when all points ON)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DC24A
DC24B
X0
COMB
X1
X2
COMB
X3
X4
COMB
X5
X6
COMB
X7
R
IN
LINK/PW
40 20 10
8 4 2 1
STATION NO.
0.2ms
1.5ms
R
X0
X1
X2
X3
41 0.2
0 1 2 3
X1
LINK/PW
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch, default
value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
4 points/1 common (2 points)
(terminal block 2-wire type)
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
35mA or less (when all points ON)
CL2X8-D1B2 input module
L RUN L ERR.
R
I/O power supply
24VDC
I/O interface terminal block (negative common)
DIP switches
PW
X0
R
0.06
Weight (kg)
Operation
Lit when power is supplied.
Lit when normal operation is performed.
Lit when communication error occurs.
402010 8 4 2 1 0.5ms
STATION NO. 1.5ms
IN
49
LED Name
PW
L RUN
L ERR.
OFF
DC input
I/O interface terminal block
24VDC
(positive common)
1 DC24A
2 DC24B
3 X0
4 COMB
5 X1
6 X2
7 COMB
8 X3
X4
X5
X6
X7
4.5
Features
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4VDC to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
100%(DC24V)
ON
CL1X4-D1B2
40
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage range
0 1 2 3
L RUN L ERR.
DC DC
4.5
Detailed specifications
PW
+24V
DA
DB
24G
22
1
2
3
4
41 0.4
2- 4.5 mounting hole
(M4 mounting screw)
40
55.5 0.4
I/O power supply
24VDC
I/O interface terminal block (negative common)
1
2
DC24A
DC24B
Unit: mm
DC
24A
X0
DC
24B
X1
COMB
X4
COMB
X2
X3
X5
COMB
COMB
X6
X7
0.09
19
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Terminal block
Terminal block type
CL1X4-D1B2 input module
Overview
Installation
Terminal block type
DIN rail or direct mounting can be done.
DC input
4
points
+COM
2
-COM
Terminal block
24VDC
Input response
switching
-wire type
External equipment connection diagram
External dimensions, terminal layout
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
50
CC-Link/LT
interface connector
10
Insulation
Small size in the industry’s smallest class
Terminal block cover has a nameplate that shows connection
destinations at a glance
Input modules used either as positive common or negative common
Terminal block that can connect 2-wire sensors and loads intact
ON
Common system
Unit
power
supply
Part Names and Functions
Voltage
Max. current
consumption
I/O operation indicator LEDs
ON: Lit
OFF: Extinguished
CL1X4-D1B2
CC-Link/LT
interface connector
Pin No.
4
3
2
1
IN
Signal Name
24G
DB
DA
+24V
1
2
LINK/PW
Setting Switch Name
Station STATION
number NO.
setting
switches
I/O
0.5ms
operation 1.5ms
setting
HLD
X1
X2
X3
18
49
40
DC
24A
X0
DC
24B
COMB
X1
COMB
X2
X3
DC input
8
points
+COM
-COM
24VDC
2
Terminal block
Input response
switching
-wire type
External dimensions, terminal layout
2- 4.5 mounting hole
(M4 mounting screw)
64
10
Insulation
1
2
3
4
Description
Tenth 40
digit
20
ON : 40
ON : 20
10
ON : 10
Unit
8
ON : 8
OFF : 0
digit
4
ON : 4
2
ON : 2
1
ON : 1
Input unit: Response speed setting
OFF: 1.5ms (standard type)
ON: 0.5ms (fast response type)
Output unit : Hold function valid
OFF: Output clear
ON: Output held
I/O hybrid unit: Hold function valid
OFF: Output clear
ON: Output held
DIN rail center
+24V
DA
DB
24G
DC DC
CL2X8-D1B2
I/O power supply
I/O interface terminal block (positive common)
24VDC
PW
0 1 2 3 4 5 6 7
L RUN L ERR.
ON
Detailed specifications
Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
ON
Terminal block
0.4
Unit: mm
CC-Link/LT
interface connector
OFF
Common system
DIN rail mounting hook
41.5
DC24A
DC24B
External equipment connection diagram
402010 8 4 2 1 0.5ms
STATION NO. 1.5ms
X0
X3
22
ON
X2
Unit
power
supply
Voltage
Max. current
consumption
Weight (kg)
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
100%(24VDC)
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
8 points/1 common (4 points)
(terminal block 2-wire type)
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
40mA or less (when all points ON)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DC24A
DC24B
X0
COMB
X1
X2
COMB
X3
X4
COMB
X5
X6
COMB
X7
R
IN
LINK/PW
40 20 10
8 4 2 1
STATION NO.
0.2ms
1.5ms
R
X0
X1
X2
X3
41 0.2
0 1 2 3
X1
LINK/PW
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch, default
value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
4 points/1 common (2 points)
(terminal block 2-wire type)
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
35mA or less (when all points ON)
CL2X8-D1B2 input module
L RUN L ERR.
R
I/O power supply
24VDC
I/O interface terminal block (negative common)
DIP switches
PW
X0
R
0.06
Weight (kg)
Operation
Lit when power is supplied.
Lit when normal operation is performed.
Lit when communication error occurs.
402010 8 4 2 1 0.5ms
STATION NO. 1.5ms
IN
49
LED Name
PW
L RUN
L ERR.
OFF
DC input
I/O interface terminal block
24VDC
(positive common)
1 DC24A
2 DC24B
3 X0
4 COMB
5 X1
6 X2
7 COMB
8 X3
X4
X5
X6
X7
4.5
Features
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4VDC to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
100%(DC24V)
ON
CL1X4-D1B2
40
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage range
0 1 2 3
L RUN L ERR.
DC DC
4.5
Detailed specifications
PW
+24V
DA
DB
24G
22
1
2
3
4
41 0.4
2- 4.5 mounting hole
(M4 mounting screw)
40
55.5 0.4
I/O power supply
24VDC
I/O interface terminal block (negative common)
1
2
DC24A
DC24B
Unit: mm
DC
24A
X0
DC
24B
X1
COMB
X4
COMB
X2
X3
X5
COMB
COMB
X6
X7
0.09
19
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Terminal block type
2
Terminal block
CL2Y8-TP1B2 output module
Hold
-wire type
External equipment connection diagram
External dimensions, terminal layout
CC-Link/LT
interface connector
Insulation
ON
CL1Y4-T1B2
402010 8 4 2 1
HLD
STATION NO.
1
2
3
4
5
6
7
8
L
L
Unit power Voltage
supply
Max. current
consumption
Weight (kg)
DC24V
DC24G
Y0
COM+
Y1
Y2
COM+
Y3
1
2
3
4
Y0
Y1
LINK/PW
Y2
Y3
41.5
4.5
Detailed specifications
Description
Photocoupler insulation
12/24VDC
10.2 to 28.8VDC (ripple ratio within 5%)
0.1A/1 point 0.4A/1 common
0.4A 10ms or less
0.1mA or less/30VDC
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
1.0ms or less
1.0ms or less
Zener diode
4 points/1 common (2 points)
(terminal block 2-wire type)
20.4 to 28.8VDC (ripple ratio within 5%)
60mA or less (when all points ON)
Detailed specifications
40
0.4
Output Specifications
Insulation system
Rated load voltage
Operating load voltage range
Maximum load current
Maximum inrush current
OFF-time leakage current
ON-time maximum
voltage drop
Response OFF ON
time
ON OFF
Surge suppressor
Common system
40
Output Specifications
Insulation system
Rated load voltage
Operating load voltage range
Maximum load current
Maximum inrush current
OFF-time leakage current
ON-time maximum
voltage drop
Response OFF ON
ON OFF
time
Surge suppressor
Common system
49
I/O power supply
24VDC I/O interface terminal block (sink output)
Unit: mm
DC
24V
Y0
DC
24G
0.06
Y1
Output section
external supply
power
Unit power
supply
COM +
Y2
COM +
Y3
Voltage
Current
consumption
Voltage
Max. current
consumption
Weight (kg)
CL1Y4-R1B2 output module
2A
Relay output
4
2
points
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
80
PW
DC DC
L RUN L ERR.
CL1Y4-R1B2
Maximum current consumption
Weight (kg)
Description
30VDC 2A/1 point, 250VAC 2A/1 point
250VAC or less, 30VDC or less
Approximately 1.0ms or less
Approximately 1.0ms or less
65mA or less (when all points ON)
0.11
L
DC DC
PW
L RUN
L ERR.
ON
40 20 10
STATION NO.
Y0
Y4
Y1
Y2
Y3
Y5
Y6
Y7
55.5
HLD
40
0.4
Unit: mm
DC
24V
Y0
DC
24G
Y1
COM +
Y4
COM +
Y2
Y3
Y5
COM +
COM +
Y6
Y7
0.09
Description
RAV1.25-3 (conforming to JIS C2805)
[Applicable wire size: 0.3 to 1.25mm2]
Unit mounting
method
DIN rail mounting or screw mounting:
M4 0.7mm 16mm or more
(Tightening torque range 78 to 108N cm)
TH35-7.5Fe, TH35-7.5Al (conforming to JIS C2812)
Y1
Y2
Y3
Applicable DIN rail
RA
71.5
4.5
NC
Y0
COM 2
Y1
COM 2
Y2
COM 2
Y3
COM 2
COM 1
COM 2
Specifications
Applicable
crimping terminal
/wire size
40
0.6
40
Output Specifications
Rated switching voltage, current
Maximum load voltage
Response OFF ON
ON OFF
time
Load power supply/
output section external
supply power
I/O interface terminal block (sink output)
24VDC
Constant1 DC24V
voltage circuit
2 DC24G
L
3 Y0
COM+
4
5 Y1
6 Y2
7 COM+
8 Y3
9 Y4
10 COM+
11 Y5
12 Y6
13 COM+
14 Y7
L
10
CL2Y8-TP1B2
22
41
49
Y0
LINK/PW
Detailed specifications
Description
Photocoupler insulation
12/24VDC
10.2 to 28.8VDC (ripple ratio within 5%)
0.1A/1 point 0.8A/1 common
0.7A 10ms or less
0.1mA or less
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
0.5ms or less
0.5ms or less (resistive load)
Zener diode
8 points/1 common (4 points)
(terminal block 2-wire type)
As in load power supply
15mA or less
(TYP. 24VDC, when all points ON)
20.4 to 28.8VDC (ripple ratio within 5%)
40mA or less (when all points ON)
+24V
DA
DB
24G
ON
402010 8 4 2 1
HLD
STATION NO.
NC
10
0.4
+24V
DA
DB
24G
I/O interface terminal block
6
7
8
9
10
11
12
13
14
15
16
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
64
Specifications common to terminal block types
External dimensions, terminal layout
Insulation
1
External dimensions, terminal layout
Hold
Terminal block
CC-Link/LT
interface connector
L
Hold
-wire type
External equipment connection diagram
1
2
3
4
Protection
Insulation
0 1 2 3
L RUN L ERR.
PW
DC DC
Terminal block
-wire type
CC-Link/LT
interface connector
22
+24V
DA
DB
24G
0.1A
2
points
10
41 0.4
1
2
3
4
8
Sink
External equipment connection diagram
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
50
Transistor output
22
points
0.1A
41 0.2
4
Sink
49
Transistor output
4.5
CL1Y4-T1B2 output module
40
Terminal
block
Unit: mm
NC
NC
NC
20
Y0
NC
NC
NC
Y2
Y1
COM2
COM2
COM2
Y3
COM1
COM2
COM2
21
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Terminal block type
2
Terminal block
CL2Y8-TP1B2 output module
Hold
-wire type
External equipment connection diagram
External dimensions, terminal layout
CC-Link/LT
interface connector
Insulation
ON
CL1Y4-T1B2
402010 8 4 2 1
HLD
STATION NO.
1
2
3
4
5
6
7
8
L
L
Unit power Voltage
supply
Max. current
consumption
Weight (kg)
DC24V
DC24G
Y0
COM+
Y1
Y2
COM+
Y3
1
2
3
4
Y0
Y1
LINK/PW
Y2
Y3
41.5
4.5
Detailed specifications
Description
Photocoupler insulation
12/24VDC
10.2 to 28.8VDC (ripple ratio within 5%)
0.1A/1 point 0.4A/1 common
0.4A 10ms or less
0.1mA or less/30VDC
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
1.0ms or less
1.0ms or less
Zener diode
4 points/1 common (2 points)
(terminal block 2-wire type)
20.4 to 28.8VDC (ripple ratio within 5%)
60mA or less (when all points ON)
Detailed specifications
40
0.4
Output Specifications
Insulation system
Rated load voltage
Operating load voltage range
Maximum load current
Maximum inrush current
OFF-time leakage current
ON-time maximum
voltage drop
Response OFF ON
time
ON OFF
Surge suppressor
Common system
40
Output Specifications
Insulation system
Rated load voltage
Operating load voltage range
Maximum load current
Maximum inrush current
OFF-time leakage current
ON-time maximum
voltage drop
Response OFF ON
ON OFF
time
Surge suppressor
Common system
49
I/O power supply
24VDC I/O interface terminal block (sink output)
Unit: mm
DC
24V
Y0
DC
24G
0.06
Y1
Output section
external supply
power
Unit power
supply
COM +
Y2
COM +
Y3
Voltage
Current
consumption
Voltage
Max. current
consumption
Weight (kg)
CL1Y4-R1B2 output module
2A
Relay output
4
2
points
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
80
PW
DC DC
L RUN L ERR.
CL1Y4-R1B2
Maximum current consumption
Weight (kg)
Description
30VDC 2A/1 point, 250VAC 2A/1 point
250VAC or less, 30VDC or less
Approximately 1.0ms or less
Approximately 1.0ms or less
65mA or less (when all points ON)
0.11
L
DC DC
PW
L RUN
L ERR.
ON
40 20 10
STATION NO.
Y0
Y4
Y1
Y2
Y3
Y5
Y6
Y7
55.5
HLD
40
0.4
Unit: mm
DC
24V
Y0
DC
24G
Y1
COM +
Y4
COM +
Y2
Y3
Y5
COM +
COM +
Y6
Y7
0.09
Description
RAV1.25-3 (conforming to JIS C2805)
[Applicable wire size: 0.3 to 1.25mm2]
Unit mounting
method
DIN rail mounting or screw mounting:
M4 0.7mm 16mm or more
(Tightening torque range 78 to 108N cm)
TH35-7.5Fe, TH35-7.5Al (conforming to JIS C2812)
Y1
Y2
Y3
Applicable DIN rail
RA
71.5
4.5
NC
Y0
COM 2
Y1
COM 2
Y2
COM 2
Y3
COM 2
COM 1
COM 2
Specifications
Applicable
crimping terminal
/wire size
40
0.6
40
Output Specifications
Rated switching voltage, current
Maximum load voltage
Response OFF ON
ON OFF
time
Load power supply/
output section external
supply power
I/O interface terminal block (sink output)
24VDC
Constant1 DC24V
voltage circuit
2 DC24G
L
3 Y0
COM+
4
5 Y1
6 Y2
7 COM+
8 Y3
9 Y4
10 COM+
11 Y5
12 Y6
13 COM+
14 Y7
L
10
CL2Y8-TP1B2
22
41
49
Y0
LINK/PW
Detailed specifications
Description
Photocoupler insulation
12/24VDC
10.2 to 28.8VDC (ripple ratio within 5%)
0.1A/1 point 0.8A/1 common
0.7A 10ms or less
0.1mA or less
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
0.5ms or less
0.5ms or less (resistive load)
Zener diode
8 points/1 common (4 points)
(terminal block 2-wire type)
As in load power supply
15mA or less
(TYP. 24VDC, when all points ON)
20.4 to 28.8VDC (ripple ratio within 5%)
40mA or less (when all points ON)
+24V
DA
DB
24G
ON
402010 8 4 2 1
HLD
STATION NO.
NC
10
0.4
+24V
DA
DB
24G
I/O interface terminal block
6
7
8
9
10
11
12
13
14
15
16
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
64
Specifications common to terminal block types
External dimensions, terminal layout
Insulation
1
External dimensions, terminal layout
Hold
Terminal block
CC-Link/LT
interface connector
L
Hold
-wire type
External equipment connection diagram
1
2
3
4
Protection
Insulation
0 1 2 3
L RUN L ERR.
PW
DC DC
Terminal block
-wire type
CC-Link/LT
interface connector
22
+24V
DA
DB
24G
0.1A
2
points
10
41 0.4
1
2
3
4
8
Sink
External equipment connection diagram
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
50
Transistor output
22
points
0.1A
41 0.2
4
Sink
49
Transistor output
4.5
CL1Y4-T1B2 output module
40
Terminal
block
Unit: mm
NC
NC
NC
20
Y0
NC
NC
NC
Y2
Y1
COM2
COM2
COM2
Y3
COM1
COM2
COM2
21
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Memo
Terminal block type
DC input
4
points
24VDC
+COM
2
-COM
Transistor output
-wire type
4
External equipment connection diagram
2
External dimensions, terminal layout
Insulation
1
2
3
4
+24V
DA
DB
24G
1
2
3
4
5
6
7
8
DC24A
DC24B
X0
COMB
X1
X2
COMB
X3
DC DC
49
R
Y0
X1
Y1
X2
Y2
X3
Y3
4.5
71.5
40
Output Specifications
Insulation system
Rated load voltage
Operating load voltage
range
Maximum load current
OFF-time leakage current
ON-time maximum
voltage drop
OFF ON
Response
time
ON OFF
Surge suppressor
Common system
Description
Photocoupler insulation
12/24VDC
10.2 to 28.8VDC (ripple ratio within 5%)
4
points
+COM
1
2
3
4
X0
DC
24B
24VDC
2
-COM
DC
24A
-wire type
External equipment connection diagram
CC-Link/LT
interface
connector
Unit: mm
0.1A/1 point 0.4A/1 common
0.1mA or less/30VDC
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
1.0ms or less
1.0ms or less
Zener diode
4 points/1 common (2 points)
(terminal block 2-wire type)
DC input
CL1XY8-DR1B2 I/O module
2A
Transistor output
4
2
points
I/O power supply
24VDC
Y0
COM2
Y1
COM2
Y2
COM2
Y3
COM1
PW L RUN L ERR.
22
0 1 2 3 0 1 2 3
CL1XY8-DR1B2
ON
R
IN
40 20 10 8 4 2 1
HLD
ST.NO.
O UT
LINK/PW
RA
X0
Y0
X1
Y1
X2
Y2
X3
Y3
71.5
40
0.6
I/O interface terminal block (negative common input/sink output)
1
2
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
1.5ms or less
1.5ms or less
4 points/1 common (2 points)
(terminal block 2-wire type)
Unit power Voltage
20.4 to 28.8VDC (-15% to +20%)
supply
Ripple ratio within 5%
Max.current 70mA or less (when all points ON)
consumption
Weight (kg)
0.11
10
R
DC24A
DC24B
40
Detailed specifications
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
100%(24VDC)
DC
24G
Y3
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
80
4.5
9
10
11
12
13
14
15
16
Y2
COM +
DC DC
DC24A
DC24B
X0
X1
COMB
X2
X3
COMB
DC
24V
COM +
External dimensions, terminal layout
I/O interface terminal block (sink output)
L
X3
Y1
Hold
Terminal block
Insulation
+24V
DA
DB
24G
X2
COMB
Y0
COMB
49
1
2
3
4
5
6
7
8
X1
-wire type
I/O power supply I/O interface terminal block
24VDC
(positive common input)
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage
range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
ON OFF
time
Common system
40
0.6
22
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
1.5ms or less
1.5ms or less
4 points/1 common (2 points)
(terminal block 2-wire type)
Unit power Voltage
20.4 to 28.8VDC (-15% to +20%)
supply
Ripple ratio within 5%
Max.current 65mA or less (when all points ON)
consumption
Weight (kg)
0.10
X0
DC24A
DC24B
Detailed specifications
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
100% (24VDC)
402010 8 4 2 1
HLD
STATION NO.
O UT
I/O interface terminal block (negative common input/sink output)
1
2
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage
range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
ON OFF
Common system
ON
IN
LINK/PW
10
0 1 2 3 0 1 2 3
R
9
Y0
10 COM+
11 Y1
12 Y2
13 COM+
14 Y3
15 DC24V
16 DC24G
I/O power supply
24VDC
L RUN L ERR.
PW
CL1XY8-DT1B2
I/O interface terminal block (sink output)
L
2- 4.5 mounting hole
(M4 mounting screw)
DIN rail center
80
I/O power supply
I/O interface terminal block (positive common input)
24VDC
L
Hold
Terminal block
-wire type
22
CC-Link/LT
interface
connector
0.1A
Sink
points
41 0.4
CL1XY8-DT1B2 I/O module
41 0.2
Terminal
block
Output Specifications
Rated switching voltage,
current
Maximum load voltage
Response OFF ON
time
ON OFF
Description
30VDC 2A/1 point,
250VAC 2A/1 point
250VAC or less, 30VDC or less
1.0ms or less
1.0ms or less
Unit: mm
DC
24A
X0
DC
24B
X1
COMB
COMB
X2
Y0
X3
COM2
Y1
COM2
Y2
COM2
Y3
COM1
23
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Sensor
Sensor connector type
CL2X8-D1C3V input module
Overview
Installation
Sensor connector type
DIN rail mounting can be done.
DC input
8
+COM
24VDC
2
points
24VDC
3
or
-wire type
Sensor
Input response
switching
Vertical
-wire type
External equipment connection diagram
External dimensions, terminal layout
39
CC-Link/LT
interface connector
CL2X8-D1C3V
IN
I/O interface sensor
connector
CON
1 +24V
2 +V
3 24G
4 X0
1
2
3
4
2-wire type sensor
(sink output)
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
Open sensor connector
To sensors, valves
ON
OFF
Common system
Part Names and Functions
Unit
power
supply
LED Name
Operation indicator LEDs
PW
ON: Lit
OFF: Extinguished
L RUN
L ERR.
Signal Name
+24V
DA
DB
24G
Operation
Lit when power is
supplied
Lit when normal
operation is performed.
Lit when communication
error occurs.
I/O operation indicator LEDs
ON: Lit
OFF: Extinguished
Setting Switch Name ST.No. Description
Tenth 40
1
Station STATION
20
digit
2
number NO.
10
3
setting
8
Unit
4
switches
4
digit
5
2
6
1
7
ON
ST.No.
LINK/PW
PW
X
L RUN
0
0.5ms
I/O
operation 1.5ms
setting
HLD
L ERR.
1
0
1
2
3
4
5
6
7
2
CON1
CON3
4
CON4
5
CON5
6
CON6
7
8
ON : 40
ON : 20
ON : 10
ON : 8
ON : 4
ON : 2
ON : 1
3
4
5
6
7
R
R
8
1
2
3
4
CON8
+24V
+V
24G
X7
24
Unit: mm
I/O interface sensor connector
Terminal No.
CON1-1
CON1-2
CON1-3
CON1-4
CON2-1
CON2-2
CON2-3
CON2-4
CON3-1
CON3-2
CON3-3
CON3-4
CON4-1
CON4-2
CON4-3
CON4-4
R
R
Transistor output
8
Sink
0.1A
2
points
Signal Name
+24V
+V
24G
X0
+24V
+V
24G
X1
+24V
+V
24G
X2
+24V
+V
24G
X3
Terminal No.
CON5-1
CON5-2
CON5-3
CON5-4
CON6-1
CON6-2
CON6-3
CON6-4
CON7-1
CON7-2
CON7-3
CON7-4
CON8-1
CON8-2
CON8-3
CON8-4
Signal Name
+24V
+V
24G
X4
+24V
+V
24G
X5
+24V
+V
24G
X6
+24V
+V
24G
X7
Sensor
Protection
Hold
Vertical
-wire type
External equipment connection diagram
OFF : 0
External dimensions, terminal layout
39
CC-Link/LT
interface connector
CL2Y8-TP1C2V
ON
ST.No.
Insulation
1
2
3
4
Input unit: Response speed setting
OFF: 1.5ms (standard type)
ON: 0.5ms (fast response type)
Output unit: Hold function valid
OFF: Output clear
ON: Output held
LINK/PW
+24V
DA
DB
24G
I/O interface sensor connector
L
1
2
3
4
CON1
+24V
NC
NC
Y0
L
1
2
3
4
CON2
+24V
NC
NC
Y1
L
1
2
3
4
CON8
+24V
NC
NC
Y7
DC
Constantvoltage
circuit
DC
DIN rail center
PW
Y
L RUN
0
L ERR.
1
2
3
4
4
5
6
7
Detailed specifications
Input Specifications
Insulation system
Rated load voltage
Operating load voltage
range
Maximum load current
Maximum inrush current
OFF-time leakage current
ON-time maximum
voltage drop
Response OFF ON
time
ON
OFF
Surge suppressor
Common system
CON8
24
2
R
CON2
+24V
+V
24G
X1
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
8 points/1 common
(sensor connector 3-wire type)
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
40mA or less (when all points ON)
CL2Y8-TP1C2V output module
CON7
DIN rail mounting hook
4
R
Detection
circuit
CON2
3
1
0
1
2
3
4
5
6
7
Refer to page 21 for DIN rail mounting specifications.
Output section external
supply power
Unit
Voltage
power
Max.current
supply
consumption
Weight (kg)
Description
Photocoupler insulation
24VDC
As in unit power supply
0.1A/1 point 0.8A/common
0.7A 10ms or less
0.1mA or less
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
0.5ms or less
0.5ms or less (resistive load)
Zener diode
8 points/1 common
(sensor connector 2-wire type)
As in unit power supply
20.4 to 28.8VDC (ripple ratio within 5%)
55mA or less (when all points ON),
external load current not included
0.05
8
24
4
Pin No.
1
2
3
4
12345678
0
Max.current
consumption
Weight (kg)
0.05
DIP switches
CL2X8-D1C3V
IN
CC-Link/LT interface
connector
Voltage
X
L ERR.
85
The smallest size in the industry
Adoption of open sensor connector that is
easy to connect sensors
Unit can be replaced by merely disconnecting
the connector.
PW
L RUN
43
Features
Description
Photocoupler insulation
24VDC
Approximately 4mA
As in unit power supply
100%(24VDC)
DIN rail center
4
Detailed specifications
DC DC
Insulation
Detection
circuit
ON
ST.No.
LINK/PW
85
3-wire type sensor
(sink output)
(NPN output type)
Insulation
+24V
DA
DB
24G
43
1
2
3
4
Unit: mm
I/O interface sensor connector
Terminal No.
CON1-1
CON1-2
CON1-3
CON1-4
CON2-1
CON2-2
CON2-3
CON2-4
CON3-1
CON3-2
CON3-3
CON3-4
CON4-1
CON4-2
CON4-3
CON4-4
Signal Name
+24V
NC
NC
Y0
+24V
NC
NC
Y1
+24V
NC
NC
Y2
+24V
NC
NC
Y3
Terminal No
CON5-1
CON5-2
CON5-3
CON5-4
CON6-1
CON6-2
CON6-3
CON6-4
CON7-1
CON7-2
CON7-3
CON7-4
CON8-1
CON8-2
CON8-3
CON8-4
Signal Name
+24V
NC
NC
Y4
+24V
NC
NC
Y5
+24V
NC
NC
Y6
+24V
NC
NC
Y7
25
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Sensor
Sensor connector type
CL2X8-D1C3V input module
Overview
Installation
Sensor connector type
DIN rail mounting can be done.
DC input
8
+COM
24VDC
2
points
24VDC
3
or
-wire type
Sensor
Input response
switching
Vertical
-wire type
External equipment connection diagram
External dimensions, terminal layout
39
CC-Link/LT
interface connector
CL2X8-D1C3V
IN
I/O interface sensor
connector
CON
1 +24V
2 +V
3 24G
4 X0
1
2
3
4
2-wire type sensor
(sink output)
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
Open sensor connector
To sensors, valves
ON
OFF
Common system
Part Names and Functions
Unit
power
supply
LED Name
Operation indicator LEDs
PW
ON: Lit
OFF: Extinguished
L RUN
L ERR.
Signal Name
+24V
DA
DB
24G
Operation
Lit when power is
supplied
Lit when normal
operation is performed.
Lit when communication
error occurs.
I/O operation indicator LEDs
ON: Lit
OFF: Extinguished
Setting Switch Name ST.No. Description
Tenth 40
1
Station STATION
20
digit
2
number NO.
10
3
setting
8
Unit
4
switches
4
digit
5
2
6
1
7
ON
ST.No.
LINK/PW
PW
X
L RUN
0
0.5ms
I/O
operation 1.5ms
setting
HLD
L ERR.
1
0
1
2
3
4
5
6
7
2
CON1
CON3
4
CON4
5
CON5
6
CON6
7
8
ON : 40
ON : 20
ON : 10
ON : 8
ON : 4
ON : 2
ON : 1
3
4
5
6
7
R
R
8
1
2
3
4
CON8
+24V
+V
24G
X7
24
Unit: mm
I/O interface sensor connector
Terminal No.
CON1-1
CON1-2
CON1-3
CON1-4
CON2-1
CON2-2
CON2-3
CON2-4
CON3-1
CON3-2
CON3-3
CON3-4
CON4-1
CON4-2
CON4-3
CON4-4
R
R
Transistor output
8
Sink
0.1A
2
points
Signal Name
+24V
+V
24G
X0
+24V
+V
24G
X1
+24V
+V
24G
X2
+24V
+V
24G
X3
Terminal No.
CON5-1
CON5-2
CON5-3
CON5-4
CON6-1
CON6-2
CON6-3
CON6-4
CON7-1
CON7-2
CON7-3
CON7-4
CON8-1
CON8-2
CON8-3
CON8-4
Signal Name
+24V
+V
24G
X4
+24V
+V
24G
X5
+24V
+V
24G
X6
+24V
+V
24G
X7
Sensor
Protection
Hold
Vertical
-wire type
External equipment connection diagram
OFF : 0
External dimensions, terminal layout
39
CC-Link/LT
interface connector
CL2Y8-TP1C2V
ON
ST.No.
Insulation
1
2
3
4
Input unit: Response speed setting
OFF: 1.5ms (standard type)
ON: 0.5ms (fast response type)
Output unit: Hold function valid
OFF: Output clear
ON: Output held
LINK/PW
+24V
DA
DB
24G
I/O interface sensor connector
L
1
2
3
4
CON1
+24V
NC
NC
Y0
L
1
2
3
4
CON2
+24V
NC
NC
Y1
L
1
2
3
4
CON8
+24V
NC
NC
Y7
DC
Constantvoltage
circuit
DC
DIN rail center
PW
Y
L RUN
0
L ERR.
1
2
3
4
4
5
6
7
Detailed specifications
Input Specifications
Insulation system
Rated load voltage
Operating load voltage
range
Maximum load current
Maximum inrush current
OFF-time leakage current
ON-time maximum
voltage drop
Response OFF ON
time
ON
OFF
Surge suppressor
Common system
CON8
24
2
R
CON2
+24V
+V
24G
X1
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
8 points/1 common
(sensor connector 3-wire type)
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
40mA or less (when all points ON)
CL2Y8-TP1C2V output module
CON7
DIN rail mounting hook
4
R
Detection
circuit
CON2
3
1
0
1
2
3
4
5
6
7
Refer to page 21 for DIN rail mounting specifications.
Output section external
supply power
Unit
Voltage
power
Max.current
supply
consumption
Weight (kg)
Description
Photocoupler insulation
24VDC
As in unit power supply
0.1A/1 point 0.8A/common
0.7A 10ms or less
0.1mA or less
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
0.5ms or less
0.5ms or less (resistive load)
Zener diode
8 points/1 common
(sensor connector 2-wire type)
As in unit power supply
20.4 to 28.8VDC (ripple ratio within 5%)
55mA or less (when all points ON),
external load current not included
0.05
8
24
4
Pin No.
1
2
3
4
12345678
0
Max.current
consumption
Weight (kg)
0.05
DIP switches
CL2X8-D1C3V
IN
CC-Link/LT interface
connector
Voltage
X
L ERR.
85
The smallest size in the industry
Adoption of open sensor connector that is
easy to connect sensors
Unit can be replaced by merely disconnecting
the connector.
PW
L RUN
43
Features
Description
Photocoupler insulation
24VDC
Approximately 4mA
As in unit power supply
100%(24VDC)
DIN rail center
4
Detailed specifications
DC DC
Insulation
Detection
circuit
ON
ST.No.
LINK/PW
85
3-wire type sensor
(sink output)
(NPN output type)
Insulation
+24V
DA
DB
24G
43
1
2
3
4
Unit: mm
I/O interface sensor connector
Terminal No.
CON1-1
CON1-2
CON1-3
CON1-4
CON2-1
CON2-2
CON2-3
CON2-4
CON3-1
CON3-2
CON3-3
CON3-4
CON4-1
CON4-2
CON4-3
CON4-4
Signal Name
+24V
NC
NC
Y0
+24V
NC
NC
Y1
+24V
NC
NC
Y2
+24V
NC
NC
Y3
Terminal No
CON5-1
CON5-2
CON5-3
CON5-4
CON6-1
CON6-2
CON6-3
CON6-4
CON7-1
CON7-2
CON7-3
CON7-4
CON8-1
CON8-2
CON8-3
CON8-4
Signal Name
+24V
NC
NC
Y4
+24V
NC
NC
Y5
+24V
NC
NC
Y6
+24V
NC
NC
Y7
25
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
MIL
MIL connector type
CL2X16-D1M1V input module
Overview
MIL connector type
Installation
DC input
16
DIN rail mounting can be done.
+COM
2
points
Input response
switching
MIL
24VDC
Vertical
-wire type
External equipment connection diagram
External dimensions, terminal layout
39
CC-Link/LT
interface connector
CL2X16-D1M1V
Insulation
+24V
DA
DB
24G
DC
Features
To I/O equipment or
terminal block
conversion unit
The smallest size in the industry
MIL connector that is easy to connect
a relay terminal or terminal block
conversion module
Unit can be replaced by merely
disconnecting the connector.
Common system
Unit
power
supply
Voltage
Max. current
consumption
Weight (kg)
Part Names and Functions
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
62.5%(24VDC)( 1)
L ERR.
4
R
85
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
R
53
24
R
Unit: mm
R
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch, default value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch, default value = OFF/1.5ms]
16 points/1 common (2 points)
(MIL connector 1-wire type)
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
45mA or less (when all points ON)
PW
L RUN
DIN rail center
4
DC
I/O interface MIL connector
CON1
1
COM+
2
COM+
3
COM+
4
COM+
20 X0
18 X1
16 X2
14 X3
12 X4
10 X5
8
X6
6
X7
19 X8
17 X9
15 XA
13 XB
11 XC
9
XD
7
XE
5
XF
Detailed specifications
ON
ST.No.
I/O power supply
24VDC
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage
range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
ON OFF
IN
LINK/PW
43
1
2
3
4
I/O interface MIL connector
Terminal No.
CON1-1
CON1-2
CON1-3
CON1-4
CON1-20
CON1-18
CON1-16
CON1-14
CON1-12
CON1-10
* For COM+, use either of 1P
and 2P or 3P and 4P.
Signal Name
COM+
COM+
COM+
COM+
X0
X1
X2
X3
X4
X5
Terminal No.
CON1-8
CON1-6
CON1-19
CON1-17
CON1-15
CON1-13
CON1-11
CON1-9
CON1-7
CON1-5
Signal Name
X6
X7
X8
X9
XA
XB
XC
XD
XE
XF
0.05
* 1) Refer to the derating curve on page 26.
DIP switches
LINK/PW
PW
LED Name
Operation indicator LEDs PW
ON: Lit L RUN
OFF: Extinguished L ERR.
Operation
Lit when power is supplied.
Lit when normal operation is performed.
Lit when communication error occurs.
I/O operation indicator LEDs
ON: Lit
OFF: Extinguished
L RUN
L ERR.
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
DIN rail mounting hook
*Refer to page 21 for DIN rail mounting specifications.
26
0.5ms
I/O
operation 1.5ms
setting
HLD
ON : 40
ON : 20
ON : 10
ON : 8
ON : 4
ON : 2
ON : 1
OFF : 0
16
Output section
external supply power
Load power
supply
Detailed specifications
14
12
0
24.0V
26.4V
28.8V
0
Hold
Vertical
External dimensions, terminal layout
39
10 20 30 40 50 55 ( )
Ambient temperature
CL2X16-D1M1V
Derating curve
+24V
DA
DB
24G
DC
DC
CL2Y16-TP1M1V
OUT
Description
Photocoupler insulation
12/24VDC
10.2 to 28.8VDC(ripple ratio within 5%)
0.1A/1 point 1.6A/common
0.7A 10ms or less
0.1mA or less
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
1.0ms or less
1.0ms or less (resistive load)
Zener diode
16 points/1 common (2 points)
(MIL connector 1-wire type)
10.2 to 28.8VDC (ripple ratio within 5%)
Output section Voltage
15mA or less (TYP. 24VDC, when all points ON)
external supply Current
consumption External load current not included
power
20.4 to 28.8VDC (ripple ratio within 5%)
Unit power Voltage
Max. current 50mA or less (when all points ON)
supply
consumption
0.05
Weight (kg)
Output Specifications
Insulation system
Rated load voltage
Operating load voltage range
Maximum load current
Maximum inrush current
OFF-time leakage current
ON-time maximum
voltage drop
Response
OFF ON
time
ON OFF
Surge suppressor
Common system
L
1
2
3
4
20
18
16
14
12
10
8
6
19
17
15
13
11
9
7
5
ON
ST.No.
I/O interface MIL connector
16
8
6
4
2
Protection
-wire type
Insulation
1
2
3
4
(points)
10
MIL
0.1A
1
CC-Link/LT
interface connector
L
MIL connector (20 pins)
Sink
points
External equipment connection diagram
Input unit: Response speed setting
OFF: 1.5ms (standard type)
ON: 0.5ms (fast response type)
Output unit: Hold function valid
OFF: Output clear
ON: Output held
8
Transistor output
CL2Y16-TP1M1V output module
CON1
CTL+
CTL+
COMCOMY0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Y9
YA
YB
YC
YD
YE
YF
LINK/PW
Constantvoltage
circuit
PW
L RUN
DIN rail center
L ERR.
85
ST.No.
ON
Setting Switch Name ST.No. Description
Tenth 40
1
Station STATION
20
digit
2
number NO.
10
3
setting
8
Unit
4
switches
4
digit
5
2
6
1
7
4
53
24
4
Signal Name
+24V
DA
DB
24G
12345678
43
Pin No.
1
2
3
4
IN
Maximum number of
simultaneous input points
CL2X16-D1M1V
CC-Link/LT
interface connector
Unit: mm
I/O interface MIL connector
When one power
supply is used as
output section
external supply
power and load
power supply.
L
CTL+
CTL+
COMCOMYF
Terminal No.
CON1-1
CON1-2
CON1-3
CON1-4
CON1-20
CON1-18
CON1-16
CON1-14
CON1-12
CON1-10
Signal Name
CTL+
CTL+
COMCOMY0
Y1
Y2
Y3
Y4
Y5
Terminal No.
CON1-8
CON1-6
CON1-19
CON1-17
CON1-15
CON1-13
CON1-11
CON1-9
CON1-7
CON1-5
Signal Name
Y6
Y7
Y8
Y9
YA
YB
YC
YD
YE
YF
27
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
MIL
MIL connector type
CL2X16-D1M1V input module
Overview
MIL connector type
Installation
DC input
16
DIN rail mounting can be done.
+COM
2
points
Input response
switching
MIL
24VDC
Vertical
-wire type
External equipment connection diagram
External dimensions, terminal layout
39
CC-Link/LT
interface connector
CL2X16-D1M1V
Insulation
+24V
DA
DB
24G
DC
Features
To I/O equipment or
terminal block
conversion unit
The smallest size in the industry
MIL connector that is easy to connect
a relay terminal or terminal block
conversion module
Unit can be replaced by merely
disconnecting the connector.
Common system
Unit
power
supply
Voltage
Max. current
consumption
Weight (kg)
Part Names and Functions
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
62.5%(24VDC)( 1)
L ERR.
4
R
85
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
R
53
24
R
Unit: mm
R
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch, default value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch, default value = OFF/1.5ms]
16 points/1 common (2 points)
(MIL connector 1-wire type)
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
45mA or less (when all points ON)
PW
L RUN
DIN rail center
4
DC
I/O interface MIL connector
CON1
1
COM+
2
COM+
3
COM+
4
COM+
20 X0
18 X1
16 X2
14 X3
12 X4
10 X5
8
X6
6
X7
19 X8
17 X9
15 XA
13 XB
11 XC
9
XD
7
XE
5
XF
Detailed specifications
ON
ST.No.
I/O power supply
24VDC
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage
range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
ON OFF
IN
LINK/PW
43
1
2
3
4
I/O interface MIL connector
Terminal No.
CON1-1
CON1-2
CON1-3
CON1-4
CON1-20
CON1-18
CON1-16
CON1-14
CON1-12
CON1-10
* For COM+, use either of 1P
and 2P or 3P and 4P.
Signal Name
COM+
COM+
COM+
COM+
X0
X1
X2
X3
X4
X5
Terminal No.
CON1-8
CON1-6
CON1-19
CON1-17
CON1-15
CON1-13
CON1-11
CON1-9
CON1-7
CON1-5
Signal Name
X6
X7
X8
X9
XA
XB
XC
XD
XE
XF
0.05
* 1) Refer to the derating curve on page 26.
DIP switches
LINK/PW
PW
LED Name
Operation indicator LEDs PW
ON: Lit L RUN
OFF: Extinguished L ERR.
Operation
Lit when power is supplied.
Lit when normal operation is performed.
Lit when communication error occurs.
I/O operation indicator LEDs
ON: Lit
OFF: Extinguished
L RUN
L ERR.
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
DIN rail mounting hook
*Refer to page 21 for DIN rail mounting specifications.
26
0.5ms
I/O
operation 1.5ms
setting
HLD
ON : 40
ON : 20
ON : 10
ON : 8
ON : 4
ON : 2
ON : 1
OFF : 0
16
Output section
external supply power
Load power
supply
Detailed specifications
14
12
0
24.0V
26.4V
28.8V
0
Hold
Vertical
External dimensions, terminal layout
39
10 20 30 40 50 55 ( )
Ambient temperature
CL2X16-D1M1V
Derating curve
+24V
DA
DB
24G
DC
DC
CL2Y16-TP1M1V
OUT
Description
Photocoupler insulation
12/24VDC
10.2 to 28.8VDC(ripple ratio within 5%)
0.1A/1 point 1.6A/common
0.7A 10ms or less
0.1mA or less
0.3V or less (TYP) 0.1A,
0.6V or less (MAX) 0.1A
1.0ms or less
1.0ms or less (resistive load)
Zener diode
16 points/1 common (2 points)
(MIL connector 1-wire type)
10.2 to 28.8VDC (ripple ratio within 5%)
Output section Voltage
15mA or less (TYP. 24VDC, when all points ON)
external supply Current
consumption External load current not included
power
20.4 to 28.8VDC (ripple ratio within 5%)
Unit power Voltage
Max. current 50mA or less (when all points ON)
supply
consumption
0.05
Weight (kg)
Output Specifications
Insulation system
Rated load voltage
Operating load voltage range
Maximum load current
Maximum inrush current
OFF-time leakage current
ON-time maximum
voltage drop
Response
OFF ON
time
ON OFF
Surge suppressor
Common system
L
1
2
3
4
20
18
16
14
12
10
8
6
19
17
15
13
11
9
7
5
ON
ST.No.
I/O interface MIL connector
16
8
6
4
2
Protection
-wire type
Insulation
1
2
3
4
(points)
10
MIL
0.1A
1
CC-Link/LT
interface connector
L
MIL connector (20 pins)
Sink
points
External equipment connection diagram
Input unit: Response speed setting
OFF: 1.5ms (standard type)
ON: 0.5ms (fast response type)
Output unit: Hold function valid
OFF: Output clear
ON: Output held
8
Transistor output
CL2Y16-TP1M1V output module
CON1
CTL+
CTL+
COMCOMY0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Y9
YA
YB
YC
YD
YE
YF
LINK/PW
Constantvoltage
circuit
PW
L RUN
DIN rail center
L ERR.
85
ST.No.
ON
Setting Switch Name ST.No. Description
Tenth 40
1
Station STATION
20
digit
2
number NO.
10
3
setting
8
Unit
4
switches
4
digit
5
2
6
1
7
4
53
24
4
Signal Name
+24V
DA
DB
24G
12345678
43
Pin No.
1
2
3
4
IN
Maximum number of
simultaneous input points
CL2X16-D1M1V
CC-Link/LT
interface connector
Unit: mm
I/O interface MIL connector
When one power
supply is used as
output section
external supply
power and load
power supply.
L
CTL+
CTL+
COMCOMYF
Terminal No.
CON1-1
CON1-2
CON1-3
CON1-4
CON1-20
CON1-18
CON1-16
CON1-14
CON1-12
CON1-10
Signal Name
CTL+
CTL+
COMCOMY0
Y1
Y2
Y3
Y4
Y5
Terminal No.
CON1-8
CON1-6
CON1-19
CON1-17
CON1-15
CON1-13
CON1-11
CON1-9
CON1-7
CON1-5
Signal Name
Y6
Y7
Y8
Y9
YA
YB
YC
YD
YE
YF
27
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Cable
Cable type
CL1Y2-T1D2S output module
Setting Switch Name Description
STATION
number NO.
I/O
0.5ms
operation 1.5ms
DC DC
HLD
ON : 40
+24V
+24V
20
ON : 20
DA
Y1
L
10
ON : 10
DB
Y0
L
Unit
8
ON : 8
digit
4
ON : 4
2
ON : 2
1
ON : 1
CL1Y2-T1D2S
OFF: 1.5ms (standard type)
Output unit: Hold function valid
I/O hybrid unit:Hold function valid
OFF: Output clear
ON: Output held
CL1X2-D1D3S input module
2
+COM
24VDC
2
points
24VDC
or
-wire type
3
500
Blue
Black
White
Brown
Switches
DC input
I/O operation indicator LEDs
ON: Lit
OFF: Extinguished
LED Name Operation
PW
Lit when power is
supplied.
L RUN
Lit when normal
operation is
performed.
Cable
DA
Insulation
R
DB
24G
Internal
circuit
Description
Photocoupler insulation
24VDC
20.4 to 28.8VDC (ripple ratio within 5%)
0.1A/1 point 0.4A/1 common
0.4A/10ms
0.1mA or less/30VDC
1V or less (MAX) 0.1A
R
24G Y0 Y1 +24V
1.0ms or less
1.0ms or less (resistive load)
Zener diode
2 points/1 common (1 point)
20.4 to 28.8VDC (ripple ratio within 5%)
35mA or less (when all points ON)
Unit: mm
24G
Input response
switching
CL1XY2-DT1D5S I/O module
External dimensions, terminal layout
DC input
1
+COM
24VDC
2
points
24VDC
or
-wire type
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
ON
OFF
Common system
Unit
Voltage
power
supply
Max. current
consumption
Weight (kg)
28
-wire type
Transistor output
1
Y1
0.1A
Sink
2
points
+24V
Cable
12
20
CC-Link/LT
dedicated
flat cable
+24V
+24V
X1
DA
X0
DB
24G
24G
I/O
flat
cable
Insulation
DC DC
R
Hold
-wire type
External dimensions, terminal layout
12
0.5A
+24V
R
Y0
L
X0
Internal
circuit
24G
0.5A
CL1X2-D1D3S
CL1XY2-DT1D5S
65
R
65
Detailed specifications
3
External equipment connection diagram
0.5A
Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage range
Y0
0.07(communication and input cables 500mm included)
I/O
flat
cable
DC DC
+24V
Output Specifications
Insulation system
Rated load voltage
Operating load voltage range
Maximum load current
Maximum rush current
OFF-time leakage current
ON-time maximum
voltage drop
Response OFF ON
time
ON OFF
Surge suppressor
Common system
Unit power Voltage
Max. current
supply
consumption
Weight (kg)
Unit: mm
20
CC-Link/LT
dedicated
flat cable
402010 8 4 2 1
Detailed specifications
-wire type
External equipment connection diagram
24G
Input unit: Response speed setting
ON: Output held
Sensor
Operation
indicator LEDs
ON: Lit
OFF: Extinguished
Internal
circuit
R
OFF: Output clear
Small size in the industry’s
smallest class
Like a cable, this module can be
placed in a duct.
Communication cable and
external equipment connection
cable are combined as one for
ease of wiring.
0.5A
40
24G
12
20
I/O
flat
cable
Insulation
digit
OFF : 0
External dimensions, terminal layout
ON: 0.5ms (fast response type)
setting
Connector to be
customer-prepared
Hold
Cable
-wire type
Tenth
setting
switches
Features
2
CC-Link/LT
dedicated
flat cable
DIP switches
Station
When cover is opened
0.1A
Sink
points
65
500
Installation
Cable
type
2
External equipment connection diagram
Part Names and Functions
Overview
Transistor output
0.5ms
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
100%(24VDC)
402010 8 4 2 1 1.5ms
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
2 points/1 common (1 point)
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
35mA or less (when all points ON)
24G X0 X1 +24V
402010 8 4 2 1
Detailed specifications
Unit: mm
24G
X0
X1
+24V
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage
range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Unit power Voltage
supply
Max.current
consumption
Weight (kg)
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
100% (24VDC)
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
35mA or less (when all points ON)
0
Output Specifications
Insulation system
Rated load voltage
Operating load voltage
range
Maximum load current
Maximum rush current
OFF-time leakage current
ON-time maximum
voltage drop
OFF ON
Response
time
ON OFF
Surge suppressor
Common system
Description
Photocoupler insulation
24VDC
20.4 to 28.8VDC (ripple ratio within 5%)
24G X0 Y0 +24V
0.1A/1 point 0.4A/common
0.4A/10ms
0.1mA or less/30VDC
1V or less (MAX) 0.1A
1.0ms or less
1.0ms or less (resistive load)
Zener diode
1 point/1 common (1 point)
Unit: mm
24G
X0
Y0
+24V
0.07 (communication and input cables 500mm included)
0.07(communication and input cables 500mm included)
29
PRODUCT INFORMATION
Remote I/O Modules
Remote I/O Modules
Cable
Cable type
CL1Y2-T1D2S output module
Setting Switch Name Description
STATION
number NO.
I/O
0.5ms
operation 1.5ms
DC DC
HLD
ON : 40
+24V
+24V
20
ON : 20
DA
Y1
L
10
ON : 10
DB
Y0
L
Unit
8
ON : 8
digit
4
ON : 4
2
ON : 2
1
ON : 1
CL1Y2-T1D2S
OFF: 1.5ms (standard type)
Output unit: Hold function valid
I/O hybrid unit:Hold function valid
OFF: Output clear
ON: Output held
CL1X2-D1D3S input module
2
+COM
24VDC
2
points
24VDC
or
-wire type
3
500
Blue
Black
White
Brown
Switches
DC input
I/O operation indicator LEDs
ON: Lit
OFF: Extinguished
LED Name Operation
PW
Lit when power is
supplied.
L RUN
Lit when normal
operation is
performed.
Cable
DA
Insulation
R
DB
24G
Internal
circuit
Description
Photocoupler insulation
24VDC
20.4 to 28.8VDC (ripple ratio within 5%)
0.1A/1 point 0.4A/1 common
0.4A/10ms
0.1mA or less/30VDC
1V or less (MAX) 0.1A
R
24G Y0 Y1 +24V
1.0ms or less
1.0ms or less (resistive load)
Zener diode
2 points/1 common (1 point)
20.4 to 28.8VDC (ripple ratio within 5%)
35mA or less (when all points ON)
Unit: mm
24G
Input response
switching
CL1XY2-DT1D5S I/O module
External dimensions, terminal layout
DC input
1
+COM
24VDC
2
points
24VDC
or
-wire type
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Response OFF ON
time
ON
OFF
Common system
Unit
Voltage
power
supply
Max. current
consumption
Weight (kg)
28
-wire type
Transistor output
1
Y1
0.1A
Sink
2
points
+24V
Cable
12
20
CC-Link/LT
dedicated
flat cable
+24V
+24V
X1
DA
X0
DB
24G
24G
I/O
flat
cable
Insulation
DC DC
R
Hold
-wire type
External dimensions, terminal layout
12
0.5A
+24V
R
Y0
L
X0
Internal
circuit
24G
0.5A
CL1X2-D1D3S
CL1XY2-DT1D5S
65
R
65
Detailed specifications
3
External equipment connection diagram
0.5A
Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage range
Y0
0.07(communication and input cables 500mm included)
I/O
flat
cable
DC DC
+24V
Output Specifications
Insulation system
Rated load voltage
Operating load voltage range
Maximum load current
Maximum rush current
OFF-time leakage current
ON-time maximum
voltage drop
Response OFF ON
time
ON OFF
Surge suppressor
Common system
Unit power Voltage
Max. current
supply
consumption
Weight (kg)
Unit: mm
20
CC-Link/LT
dedicated
flat cable
402010 8 4 2 1
Detailed specifications
-wire type
External equipment connection diagram
24G
Input unit: Response speed setting
ON: Output held
Sensor
Operation
indicator LEDs
ON: Lit
OFF: Extinguished
Internal
circuit
R
OFF: Output clear
Small size in the industry’s
smallest class
Like a cable, this module can be
placed in a duct.
Communication cable and
external equipment connection
cable are combined as one for
ease of wiring.
0.5A
40
24G
12
20
I/O
flat
cable
Insulation
digit
OFF : 0
External dimensions, terminal layout
ON: 0.5ms (fast response type)
setting
Connector to be
customer-prepared
Hold
Cable
-wire type
Tenth
setting
switches
Features
2
CC-Link/LT
dedicated
flat cable
DIP switches
Station
When cover is opened
0.1A
Sink
points
65
500
Installation
Cable
type
2
External equipment connection diagram
Part Names and Functions
Overview
Transistor output
0.5ms
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
100%(24VDC)
402010 8 4 2 1 1.5ms
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
0.5ms/1.5ms or less (at 24VDC)
[Selected using DIP switch,
default value = OFF/1.5ms]
2 points/1 common (1 point)
20.4 to 28.8VDC(-15% to +20%)
Ripple ratio within 5%
35mA or less (when all points ON)
24G X0 X1 +24V
402010 8 4 2 1
Detailed specifications
Unit: mm
24G
X0
X1
+24V
Input Specifications
Insulation system
Rated input voltage
Rated input current
Operating voltage
range
Maximum number of
simultaneous input points
ON voltage/ON current
OFF voltage/OFF current
Input resistance
Unit power Voltage
supply
Max.current
consumption
Weight (kg)
Description
Photocoupler insulation
24VDC
Approximately 4mA
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
100% (24VDC)
19V or more/3mA or more
11V or less/1.7mA or less
5.6k
20.4 to 28.8VDC (-15% to +20%)
Ripple ratio within 5%
35mA or less (when all points ON)
0
Output Specifications
Insulation system
Rated load voltage
Operating load voltage
range
Maximum load current
Maximum rush current
OFF-time leakage current
ON-time maximum
voltage drop
OFF ON
Response
time
ON OFF
Surge suppressor
Common system
Description
Photocoupler insulation
24VDC
20.4 to 28.8VDC (ripple ratio within 5%)
24G X0 Y0 +24V
0.1A/1 point 0.4A/common
0.4A/10ms
0.1mA or less/30VDC
1V or less (MAX) 0.1A
1.0ms or less
1.0ms or less (resistive load)
Zener diode
1 point/1 common (1 point)
Unit: mm
24G
X0
Y0
+24V
0.07 (communication and input cables 500mm included)
0.07(communication and input cables 500mm included)
29
PRODUCT INFORMATION
Power Supply Adaptor and Others
Power Supply Adaptor and Others
Power Supply Adaptor
Software (MELSEC Programming Software)
CL1PAD1 power supply adaptor
GX-Developer SW
External equipment connection diagram
External dimensions
CC-Link/LT can be diagnosed/monitored using GX Developer.
CC-Link/LT
interface connector
CC-Link/LT
interface connector
DIN rail center
66
+24V
DA
DB
24G
-DA
DB
--
Stabilized power supply
24VDC
1 +24V
+
2 24G
3
10
The QCPU allows host monitor, other station
monitor and line monitor to be performed in
"CC-Link/LT diagnostics" of GX Developer.
43
LINK/POWER
Internal
circuit
CL1PAD1
85
LINK
90
1
2
3
4
75
1
2
3
4
D5C-GPPW-E
Operating environment
Detailed specifications
Description
28.8VDC
Environment
Windows 95 (English version), Windows 98 (English version)
Windows NT Workstation 4.0 (English version),
Windows 2000 (English version), Windows ME (English version)
CPU
Pentium 133MHz or more
Display
Resolution 800 600 dots or more (recommended 1024 768 dots)
Memory
32MB or more
Hard disk capacity 80MB or more
Disk drive
3.5 inch (1.44MB) floppy disk drive, CD-ROM drive
Item
5
OS
External supply power should be
prepared by the customer.
5.0A
2- 4.5
Refer to page 34
for selection and power supply capacity
calculation (technical information).
Terminal layout
24G
10M across input-FG by 500VDC
insulation resistance tester
Module power supply: Terminal block,
3 pins (M3 screw)
Communication line(transmission circuits
are all changed into communication line)/
unit supply power section:
CC-Link/LT dedicated flat cable compatibility
CC-Link/LT dedicated connector (4p) 2
+24V
Specifications
Maximum
input voltage
Maximum
input current
Insulation
resistance
External
connection
system
Terminal block for power supply adaptor power supply
Product
Environment
Relevant Manuals, Etc.
Description
GX Developer SW D5C-GPPW-E MELSEC PLC software package
At least one power supply
adaptor is always required
for the CC-Link/LT system.
Features
Operating Manual (SH-080166)
Mitsubishi Integrated FA Software Catalog (L(NA)08008)
This power supply adaptor is designed to stabilize the whole system when power is supplied
to the CC-Link/LT system from an external power supply (customer-prepared).
CC-Link/LT Dedicated Communication LSIs
Accessories
Communication connector
Model: CL9-CNF-18
Model: CL9-FL4-18
Connector exclusively for CC-Link/LT
(In packs of ten)
Male/female-integrated connector
of two-piece structure.
Soon to be released
CLC13 (for master station), CLC21 (for remote I/O station)
Cable
CC-Link/LT dedicated
flat cable.
For prevention of reverse
insertion, the number of
grooves on one side is one
fewer than that on the other.
You can develop CC-Link/LT compatible products easily
without being conscious of a communication protocol.
CLC13 (master station)
Having a built-in communication protocol, this LSI allows you to develop the product that will control data
communication and remote stations, without being conscious of a communication protocol, by performing
memory read/write from an external CPU.
CLC21 (remote I/O station)
Having a built-in communication protocol, this LSI allows you to develop the
product that will handle bit data, without using an external CPU (programless).
When
assembled
Precautions
Open sensor connectors
Terminating resistor
Model: ECN-******
I/O connectors exclusively
for sensor connector type.
* : Model changes depending on
the connector color and wire diameter.
30
Product
Model: CL9-RYVK
Terminating resistor for
CC-Link/LT dedicated cable
(CL9-FL4-18).
(In packs of two)
Order model
Packing unit
Application
CLC13
CL2GA13-60
60 pcs.
Master station
CLC:CC-Link/LT Controller
CLC21
CL2GA21-60
60 pcs.
CL2GA21-300
300 pcs.
Remote I/O station
To purchase the communication LSIs, you need
to become a member (regular or higher member)
of the CC-Link Partner Association (CLPA).
Refer to page 36 for the CC-Link Partner Association.
For details of the communication LSIs,
contact the following Open System Center.
Open System Center, Nagoya Works,
Mitsubishi Electric Corporation
Tel:+81-52-712-2369 Fax:+81-52-712-2419
Open: 9:00 to 12:00, 13:00 to 17:00
(Except Saturdays, Sundays, national
holidays and our holidays)
31
PRODUCT INFORMATION
Power Supply Adaptor and Others
Power Supply Adaptor and Others
Power Supply Adaptor
Software (MELSEC Programming Software)
CL1PAD1 power supply adaptor
GX-Developer SW
External equipment connection diagram
External dimensions
CC-Link/LT can be diagnosed/monitored using GX Developer.
CC-Link/LT
interface connector
CC-Link/LT
interface connector
DIN rail center
66
+24V
DA
DB
24G
-DA
DB
--
Stabilized power supply
24VDC
1 +24V
+
2 24G
3
10
The QCPU allows host monitor, other station
monitor and line monitor to be performed in
"CC-Link/LT diagnostics" of GX Developer.
43
LINK/POWER
Internal
circuit
CL1PAD1
85
LINK
90
1
2
3
4
75
1
2
3
4
D5C-GPPW-E
Operating environment
Detailed specifications
Description
28.8VDC
Environment
Windows 95 (English version), Windows 98 (English version)
Windows NT Workstation 4.0 (English version),
Windows 2000 (English version), Windows ME (English version)
CPU
Pentium 133MHz or more
Display
Resolution 800 600 dots or more (recommended 1024 768 dots)
Memory
32MB or more
Hard disk capacity 80MB or more
Disk drive
3.5 inch (1.44MB) floppy disk drive, CD-ROM drive
Item
5
OS
External supply power should be
prepared by the customer.
5.0A
2- 4.5
Refer to page 34
for selection and power supply capacity
calculation (technical information).
Terminal layout
24G
10M across input-FG by 500VDC
insulation resistance tester
Module power supply: Terminal block,
3 pins (M3 screw)
Communication line(transmission circuits
are all changed into communication line)/
unit supply power section:
CC-Link/LT dedicated flat cable compatibility
CC-Link/LT dedicated connector (4p) 2
+24V
Specifications
Maximum
input voltage
Maximum
input current
Insulation
resistance
External
connection
system
Terminal block for power supply adaptor power supply
Product
Environment
Relevant Manuals, Etc.
Description
GX Developer SW D5C-GPPW-E MELSEC PLC software package
At least one power supply
adaptor is always required
for the CC-Link/LT system.
Features
Operating Manual (SH-080166)
Mitsubishi Integrated FA Software Catalog (L(NA)08008)
This power supply adaptor is designed to stabilize the whole system when power is supplied
to the CC-Link/LT system from an external power supply (customer-prepared).
CC-Link/LT Dedicated Communication LSIs
Accessories
Communication connector
Model: CL9-CNF-18
Model: CL9-FL4-18
Connector exclusively for CC-Link/LT
(In packs of ten)
Male/female-integrated connector
of two-piece structure.
Soon to be released
CLC13 (for master station), CLC21 (for remote I/O station)
Cable
CC-Link/LT dedicated
flat cable.
For prevention of reverse
insertion, the number of
grooves on one side is one
fewer than that on the other.
You can develop CC-Link/LT compatible products easily
without being conscious of a communication protocol.
CLC13 (master station)
Having a built-in communication protocol, this LSI allows you to develop the product that will control data
communication and remote stations, without being conscious of a communication protocol, by performing
memory read/write from an external CPU.
CLC21 (remote I/O station)
Having a built-in communication protocol, this LSI allows you to develop the
product that will handle bit data, without using an external CPU (programless).
When
assembled
Precautions
Open sensor connectors
Terminating resistor
Model: ECN-******
I/O connectors exclusively
for sensor connector type.
* : Model changes depending on
the connector color and wire diameter.
30
Product
Model: CL9-RYVK
Terminating resistor for
CC-Link/LT dedicated cable
(CL9-FL4-18).
(In packs of two)
Order model
Packing unit
Application
CLC13
CL2GA13-60
60 pcs.
Master station
CLC:CC-Link/LT Controller
CLC21
CL2GA21-60
60 pcs.
CL2GA21-300
300 pcs.
Remote I/O station
To purchase the communication LSIs, you need
to become a member (regular or higher member)
of the CC-Link Partner Association (CLPA).
Refer to page 36 for the CC-Link Partner Association.
For details of the communication LSIs,
contact the following Open System Center.
Open System Center, Nagoya Works,
Mitsubishi Electric Corporation
Tel:+81-52-712-2369 Fax:+81-52-712-2419
Open: 9:00 to 12:00, 13:00 to 17:00
(Except Saturdays, Sundays, national
holidays and our holidays)
31
TECHNICAL INFORMATION
Specifications
Specifications
Cable Specifications
Communication specifications
Maximum number of link points
Points within parentheses assume that I/O are used
Number of link points per station
Points within parentheses assume that I/O are used
Number of points
When 32
Link
2.5Mbps
stations
scan
are connected 625kbps
time
156kbps
(ms)
Number of points
When 64
2.5Mbps
stations
are connected 625kbps
156kbps
4-Point Mode
8-Point Mode
16-Point Mode
256 points (512 points)
512 points (1024 points)
1024 points (2048 points)
4 points (8 points)
128 points
0.7
2.2
8.0
256 points
1.2
4.3
15.6
2.5M/625k/156k
BITR (Broadcastpollintg + Interval Timed Response)
T-branch
CRC
64
1 to 64
Communication speed (bps)
Protocol
Network topology
Error control method
Number of connected units
Remote station numbers
Maximum number of modules connected
in 1 drop line
Distance between stations
T-branch interval
Master station connection position
RAS functions
Connection cable
16 points (32 points)
8 points (16 points)
256 points
0.8
2.7
10.0
512 points
1.5
5.4
20.0
512 points
1.0
3.8
14.1
1024 points
2.0
7.4
27.8
CC-Link/LT dedicated flat cable specifications
Item
Cable type
Operating temperature range
Rated voltage
Number of cores
Conductor resistance (20 )
Safety
Flame resistance
Specifications
Flat cable
-10 to 80
30V
4
23.4 /Km or less
UL Subject 758
UL VW-1 -F-
Section
Ground color (light blue)
Polarity mark (orange)
2.54mm
Control specifications
CC-Link/LT Specifications
2.54mm
10.16mm
General Specifications
General specifications indicate the specifications of the environment where these products can be installed and operated.
Unless otherwise exceptional specifications are indicated, the general specifications apply to all products.
Install and operate the products in the environment given in the general specifications.
Item
8
No restriction
No restriction
Connected to the end of the main line
Network diagnostics, internal loopback diagnostics, slave station separation, automatic return to system
Dedicated flat cable(0.75mm2 4)
Specifications
Operating ambient temperature
0 to 55
Storage ambient temperature
-25 to 75
Operating ambient humidity
Conforming to JIS B 3502, IEC61131-2, level RH-2 (5 to 95%RH, non-condensing)
Storage ambient humidity
Conforming to JIS B 3502, IEC61131-2, level RH-2 (5 to 95%RH, non-condensing)
(*1)
(*1)
Sweep count
Conforming to
Under intermittent vibration
JIS B 3502,
Frequency
Acceleration
Amplitude
10 times each in X, Y, Z
IEC 61131-2
10 to 57Hz
-
0.075mm
directions (for 80 minutes)
57 to 150Hz
9.8m/s2
Vibration resistance
Under continuous vibration
Network Wiring Specifications
Trunk length
(branch line length not included)
T-branch connection
T-branch interval
Terminating
resistor
Power
supply
adaptor
Drop length
Master station
Remote
I/O station
Remote
I/O station
Remote
I/O station
Item
Communication speed
Distance between stations
Maximum number of modules
connected in 1 drop line
32
Remote
I/O station
Remote
I/O station
Remote
I/O station
Remote
I/O station
625kbps
No restriction
Terminating
resistor
Acceleration
Amplitude
10 to 57Hz
-
0.035mm
57 to 150Hz
4.9m/s2
-
2
Shock resistance
Conforming to JIS B 3502, IEC 61131-2 (147m/s, 3 times in each of directions X, Y, Z)
Operating atmosphere
No corrosive gases
Operating altitude
Conforming to JIS B 3502, IEC 61131-2 (2000m or less) (*2)
Installation place
Inside control box(*3)
Overvoltage category
Conforming to JIS B 3502, IEC 61131-2 (category II or less)(* 4)
Pollution level
Conforming to JIS B 3502, IEC 61131-2, pollution level 2 or less(*5)
The operating/storage ambient temperature satisfies the requirements that exceed the stipulations of JIS B 3502 and IEC61131-2.
The equipment cannot be used under pressure higher than the atmospheric pressure of altitude 0m. Doing so can cause a failure.
The equipment can be used in any environment other than in a control box if it satisfies the conditions such as the operating ambient temperature and operating ambient humidity.
This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within
premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for up to the rated voltage of 300V is 2500V.
*5) This index indicates the degree to which conductive material is generated in the environment where the equipment is used. In pollution level 2, only non-conductive pollution
occurs but temporary conductivity may be produced due to condensing.
*1)
*2)
*3)
*4)
Trunk line
Remote
I/O station
Drop line
Specifications
2.5Mbps
Remote
I/O station
Frequency
156kbps
Remarks
-
8
Maximum trunk length
35m
100m
500m
T-branch interval
Maximum drop length
Cumulative drop line length
4m
15m
No restriction
16m
50m
60m
200m
Cable length between terminating resistors
Branch line length not included
Cable length per branch
Sum of all drop lines
33
TECHNICAL INFORMATION
Specifications
Specifications
Cable Specifications
Communication specifications
Maximum number of link points
Points within parentheses assume that I/O are used
Number of link points per station
Points within parentheses assume that I/O are used
Number of points
When 32
Link
2.5Mbps
stations
scan
are connected 625kbps
time
156kbps
(ms)
Number of points
When 64
2.5Mbps
stations
are connected 625kbps
156kbps
4-Point Mode
8-Point Mode
16-Point Mode
256 points (512 points)
512 points (1024 points)
1024 points (2048 points)
4 points (8 points)
128 points
0.7
2.2
8.0
256 points
1.2
4.3
15.6
2.5M/625k/156k
BITR (Broadcastpollintg + Interval Timed Response)
T-branch
CRC
64
1 to 64
Communication speed (bps)
Protocol
Network topology
Error control method
Number of connected units
Remote station numbers
Maximum number of modules connected
in 1 drop line
Distance between stations
T-branch interval
Master station connection position
RAS functions
Connection cable
16 points (32 points)
8 points (16 points)
256 points
0.8
2.7
10.0
512 points
1.5
5.4
20.0
512 points
1.0
3.8
14.1
1024 points
2.0
7.4
27.8
CC-Link/LT dedicated flat cable specifications
Item
Cable type
Operating temperature range
Rated voltage
Number of cores
Conductor resistance (20 )
Safety
Flame resistance
Specifications
Flat cable
-10 to 80
30V
4
23.4 /Km or less
UL Subject 758
UL VW-1 -F-
Section
Ground color (light blue)
Polarity mark (orange)
2.54mm
Control specifications
CC-Link/LT Specifications
2.54mm
10.16mm
General Specifications
General specifications indicate the specifications of the environment where these products can be installed and operated.
Unless otherwise exceptional specifications are indicated, the general specifications apply to all products.
Install and operate the products in the environment given in the general specifications.
Item
8
No restriction
No restriction
Connected to the end of the main line
Network diagnostics, internal loopback diagnostics, slave station separation, automatic return to system
Dedicated flat cable(0.75mm2 4)
Specifications
Operating ambient temperature
0 to 55
Storage ambient temperature
-25 to 75
Operating ambient humidity
Conforming to JIS B 3502, IEC61131-2, level RH-2 (5 to 95%RH, non-condensing)
Storage ambient humidity
Conforming to JIS B 3502, IEC61131-2, level RH-2 (5 to 95%RH, non-condensing)
(*1)
(*1)
Sweep count
Conforming to
Under intermittent vibration
JIS B 3502,
Frequency
Acceleration
Amplitude
10 times each in X, Y, Z
IEC 61131-2
10 to 57Hz
-
0.075mm
directions (for 80 minutes)
57 to 150Hz
9.8m/s2
Vibration resistance
Under continuous vibration
Network Wiring Specifications
Trunk length
(branch line length not included)
T-branch connection
T-branch interval
Terminating
resistor
Power
supply
adaptor
Drop length
Master station
Remote
I/O station
Remote
I/O station
Remote
I/O station
Item
Communication speed
Distance between stations
Maximum number of modules
connected in 1 drop line
32
Remote
I/O station
Remote
I/O station
Remote
I/O station
Remote
I/O station
625kbps
No restriction
Terminating
resistor
Acceleration
Amplitude
10 to 57Hz
-
0.035mm
57 to 150Hz
4.9m/s2
-
2
Shock resistance
Conforming to JIS B 3502, IEC 61131-2 (147m/s, 3 times in each of directions X, Y, Z)
Operating atmosphere
No corrosive gases
Operating altitude
Conforming to JIS B 3502, IEC 61131-2 (2000m or less) (*2)
Installation place
Inside control box(*3)
Overvoltage category
Conforming to JIS B 3502, IEC 61131-2 (category II or less)(* 4)
Pollution level
Conforming to JIS B 3502, IEC 61131-2, pollution level 2 or less(*5)
The operating/storage ambient temperature satisfies the requirements that exceed the stipulations of JIS B 3502 and IEC61131-2.
The equipment cannot be used under pressure higher than the atmospheric pressure of altitude 0m. Doing so can cause a failure.
The equipment can be used in any environment other than in a control box if it satisfies the conditions such as the operating ambient temperature and operating ambient humidity.
This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within
premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for up to the rated voltage of 300V is 2500V.
*5) This index indicates the degree to which conductive material is generated in the environment where the equipment is used. In pollution level 2, only non-conductive pollution
occurs but temporary conductivity may be produced due to condensing.
*1)
*2)
*3)
*4)
Trunk line
Remote
I/O station
Drop line
Specifications
2.5Mbps
Remote
I/O station
Frequency
156kbps
Remarks
-
8
Maximum trunk length
35m
100m
500m
T-branch interval
Maximum drop length
Cumulative drop line length
4m
15m
No restriction
16m
50m
60m
200m
Cable length between terminating resistors
Branch line length not included
Cable length per branch
Sum of all drop lines
33
Technical Information
Power Supply Adaptor Installation
Power Supply Adaptor Installation
Calculation Examples
Concept of Power Supply Adaptor Installation
A CC-Link/LT system always requires one or more power supply adaptors.
To construct a system with one power supply adaptor, the following
two conditions must be satisfied.
If they cannot be satisfied, the system using two or more power supply
adaptors must be reexamined
<System configuration example>
System power
calculation
Reexamine system
using two or more
power supply
adaptors.
Current consumption
calculation
Master station
28mA
Trunk line
Drop line
NO
1. Since the current capacity of
the power supply adaptor is 5A
Sum of current consumptions
Sum of current
consumptions
5A
0.5m
YES
2. Since the minimum operating
voltage of each unit is 20.4V
Voltage drop
3.6V
Voltage drop
calculation
(In-depth
calculation)
Voltage drop calculation
(Simple calculation)
(At 24VDC: 24V - 20.4V = 3.6V)
Longest distance
1m
5A?
NO
Power supply
adaptor
NO
Supplementary
manual 3.6V
Voltage
drop 3.6V
General-purpose
power supply
*The output current of the general-purpose power
supply must be equal to or greater than the
current consumption of the CC-Link/LT system.
(Maximum 5A or less)
4m
5m
YES
5m
10m
10m
YES
Completion
2m
System Power Calculation Method
1) Current consumption
calculation
Current consumption
of CC-Link/LT system
Sum of current consumptions
of CC-Link/LT modules
(see below)
=
+
Sum of current consumptions of
I/O equipment (sensors, etc.)
5A
*Modules marked * in the following table
supply power to I/O equipment.
CC-Link/LT unit current consumption list
Type
Model
Specifications
Current Consumption (mA)
Type
Model
Specifications
Current Consumption (mA)
Master module QJ61CL12
Q series CC-Link/LT master module
28
Sensor
CL2X8-D1C3V
8-point sensor connector 24VDC input
40 *
Terminal
CL1X4-D1B2
4-point terminal block 24VDC input
35
connector type
CL2Y8-TP1C2V
8-point sensor connector 0.1A transistor output
40 *
block type
CL1Y4-T1B2
4-point terminal block 0.1A transistor output
60
MIL connector
CL2X16-D1M1V
16-point MIL connector 24VDC input
45
CL1Y4-R1B2
4-point terminal block 2A relay output
65
type
CL2Y16-TP1M1V
16-point MIL connector 0.1A transistor output
50
CL2X8-D1B2
8-point terminal block 24VDC input
40
Cable type
CL1X2-D1D3S
2-point cable type 24VDC input
35 *
CL2Y8-TP1B2
8-point terminal block 0.1A transistor output
40
CL1Y2-T1D2S
2-point cable type 0.1A transistor output
35 *
CL1XY8-DT1B2
8-point terminal block 24VDC input/0.1A transistor output
65
CL1XY2-T1D2S
2-point cable type 24VDC input/0.1A transistor output
35 *
CL1XY8-DR1B2
8-point terminal block 24VDC input/2A relay output
70
0.2m
Station 1)
100mA
Station 2)
60mA
Branch
line A
Branch
line B
4m
4m
0.2m
0.2m
Station 5)
60mA
Station 3)
80mA
3m
*The above current consumption of each station
includes the current consumption of the
connected I/O equipment.
4m
0.2m
Station 6)
150mA
Station 4)
200mA
3m
Branch
line C
2) Voltage drop calculation
Station 7)
250mA
Simple and in-depth calculation methods are available for voltage drop calculation.
Simple calculation method
A simple calculation method for ease of making confirmation. Make calculation using the look-up chart or calculation expression.
(At power supply voltage: 24VDC, ambient temperature: 20 )
*Use the in-depth calculation method for calculation if the ambient temperature differs greatly from 20
Maximum cable length [m]
a. Selection using look-up chart
Sum of current consumptions
or the main and branch lines are extended using connectors.
Voltage
drop (V)
=
(longest distance (m) +
constant: 11)
constant :
0.06
current
consumption
sum (A)
Longest
distance:
The farthest station from
the power supply adaptor
35
Current
consumption
sum:
Current consumption sum
of CC-Link/LT modules
Current consumption [A]
Station 1) Station 2) Station 3) Station 4) Station 5) Station 6) Station 7)
2) Voltage drop calculation
(35.5m+constant: 11)
1
1
5A
3.6V
100
50
10
28mA + 100mA + 60mA + 80mA + 200mA + 60mA + 150mA + 250mA = 928mA = 0.9A
Master
station
b. Selection using calculation expression
560
0.1
0.1
Branch
line D
1) Current consumption calculation
Current consumption sum of
I/O equipment (such as sensors)
(Current consumptions of connected
I/O equipment)
constant: 0.06
0.9A = 2.511V
3.6V
Longest distance: The remotest station from the power supply adaptor, station 7) of branch line D
0.5m + 4m + 5m + 5m + 10m + 4m + 4m + 3m = 35.5m
Within the above frame, the number of
power supply adaptors may be one
Refer to the supplementary manual of the power supply adaptor (CL1PAD1) for details.
34
From above 1) and 2), both the current and voltage can be supplied
by one power supply adaptor.
35
Technical Information
Power Supply Adaptor Installation
Power Supply Adaptor Installation
Calculation Examples
Concept of Power Supply Adaptor Installation
A CC-Link/LT system always requires one or more power supply adaptors.
To construct a system with one power supply adaptor, the following
two conditions must be satisfied.
If they cannot be satisfied, the system using two or more power supply
adaptors must be reexamined
<System configuration example>
System power
calculation
Reexamine system
using two or more
power supply
adaptors.
Current consumption
calculation
Master station
28mA
Trunk line
Drop line
NO
1. Since the current capacity of
the power supply adaptor is 5A
Sum of current consumptions
Sum of current
consumptions
5A
0.5m
YES
2. Since the minimum operating
voltage of each unit is 20.4V
Voltage drop
3.6V
Voltage drop
calculation
(In-depth
calculation)
Voltage drop calculation
(Simple calculation)
(At 24VDC: 24V - 20.4V = 3.6V)
Longest distance
1m
5A?
NO
Power supply
adaptor
NO
Supplementary
manual 3.6V
Voltage
drop 3.6V
General-purpose
power supply
*The output current of the general-purpose power
supply must be equal to or greater than the
current consumption of the CC-Link/LT system.
(Maximum 5A or less)
4m
5m
YES
5m
10m
10m
YES
Completion
2m
System Power Calculation Method
1) Current consumption
calculation
Current consumption
of CC-Link/LT system
Sum of current consumptions
of CC-Link/LT modules
(see below)
=
+
Sum of current consumptions of
I/O equipment (sensors, etc.)
5A
*Modules marked * in the following table
supply power to I/O equipment.
CC-Link/LT unit current consumption list
Type
Model
Specifications
Current Consumption (mA)
Type
Model
Specifications
Current Consumption (mA)
Master module QJ61CL12
Q series CC-Link/LT master module
28
Sensor
CL2X8-D1C3V
8-point sensor connector 24VDC input
40 *
Terminal
CL1X4-D1B2
4-point terminal block 24VDC input
35
connector type
CL2Y8-TP1C2V
8-point sensor connector 0.1A transistor output
40 *
block type
CL1Y4-T1B2
4-point terminal block 0.1A transistor output
60
MIL connector
CL2X16-D1M1V
16-point MIL connector 24VDC input
45
CL1Y4-R1B2
4-point terminal block 2A relay output
65
type
CL2Y16-TP1M1V
16-point MIL connector 0.1A transistor output
50
CL2X8-D1B2
8-point terminal block 24VDC input
40
Cable type
CL1X2-D1D3S
2-point cable type 24VDC input
35 *
CL2Y8-TP1B2
8-point terminal block 0.1A transistor output
40
CL1Y2-T1D2S
2-point cable type 0.1A transistor output
35 *
CL1XY8-DT1B2
8-point terminal block 24VDC input/0.1A transistor output
65
CL1XY2-T1D2S
2-point cable type 24VDC input/0.1A transistor output
35 *
CL1XY8-DR1B2
8-point terminal block 24VDC input/2A relay output
70
0.2m
Station 1)
100mA
Station 2)
60mA
Branch
line A
Branch
line B
4m
4m
0.2m
0.2m
Station 5)
60mA
Station 3)
80mA
3m
*The above current consumption of each station
includes the current consumption of the
connected I/O equipment.
4m
0.2m
Station 6)
150mA
Station 4)
200mA
3m
Branch
line C
2) Voltage drop calculation
Station 7)
250mA
Simple and in-depth calculation methods are available for voltage drop calculation.
Simple calculation method
A simple calculation method for ease of making confirmation. Make calculation using the look-up chart or calculation expression.
(At power supply voltage: 24VDC, ambient temperature: 20 )
*Use the in-depth calculation method for calculation if the ambient temperature differs greatly from 20
Maximum cable length [m]
a. Selection using look-up chart
Sum of current consumptions
or the main and branch lines are extended using connectors.
Voltage
drop (V)
=
(longest distance (m) +
constant: 11)
constant :
0.06
current
consumption
sum (A)
Longest
distance:
The farthest station from
the power supply adaptor
35
Current
consumption
sum:
Current consumption sum
of CC-Link/LT modules
Current consumption [A]
Station 1) Station 2) Station 3) Station 4) Station 5) Station 6) Station 7)
2) Voltage drop calculation
(35.5m+constant: 11)
1
1
5A
3.6V
100
50
10
28mA + 100mA + 60mA + 80mA + 200mA + 60mA + 150mA + 250mA = 928mA = 0.9A
Master
station
b. Selection using calculation expression
560
0.1
0.1
Branch
line D
1) Current consumption calculation
Current consumption sum of
I/O equipment (such as sensors)
(Current consumptions of connected
I/O equipment)
constant: 0.06
0.9A = 2.511V
3.6V
Longest distance: The remotest station from the power supply adaptor, station 7) of branch line D
0.5m + 4m + 5m + 5m + 10m + 4m + 4m + 3m = 35.5m
Within the above frame, the number of
power supply adaptors may be one
Refer to the supplementary manual of the power supply adaptor (CL1PAD1) for details.
34
From above 1) and 2), both the current and voltage can be supplied
by one power supply adaptor.
35
CC-Link Partner Association
CC-Link Partner Association
CC-Link Partner Association
The "CC-Link" and "CC-Link/LT" network satisfies the need for both
"openness" and"safety."
The CC-Link Partner Association backs up customers all over the world.
What is the CC-Link Partner Association?
What Does a Conformance Test Mean?
The CC-Link Partner Association is an organization made up of CC-Link product-development partner manufacturers in order to popularize CC-Link and CC-Link/LT.
Name
CC-Link Partner Association
Abbreviation CLPA
A conformance test is conducted for each model
of all the CC-Link and CC-Link/LT products sold
by a partner manufacturer. The test ensures that
it can be used safely.
Memo
The CC-Link Partner Association helps users
to construct automated plants and vendors to
develop products that are compatible with CCLink and CC-Link/LT.
Vendor support
Presentations at various exhibitions
Planning and organizing various seminars
Delivery of information using homepages and
Internet services
Delivery of catalogs and materials for easy
selection of partner manufacturers’ products
and network-related products
Support of development of CC-Link and CCLink/LT compatible products
Performing conformance tests
Operation of the window used to join the CCLink Partner Association
Power supply noise test (AC/DC)
Tested product
Master station
Power supply
cable
Bundled cable noise test
Tested product
Master station
Communication cable (CC-Link)
64-station connection aging test
Master station
Tested product
User support
Delivery of information using homepages and
Internet services
Delivery of catalogs and materials for easy
selection of partner manufacturers’ products
and network-related products
(64 stations)
Interoperability test
Master station
Tested product
CC-Link Partner Association Headquarters
Headquarters: Chusanren Building, Nagoya
CC-Link Partner Association Overseas
Conformance Tests
Outside Orgnizations
Vice-Secretary General Council
North America
Europe (UK)
South Korea
Taiwan
China
ASEAN (Singapore)
Technical Task Force
Marketing Task Force
Contact
3-12-13 (Chusanren Building), Shirakabe,
Higashi-ku, Nagoya, Japan
TEL (052)936-6050 FAX (052)936-6005
Mail address: cc-link@post0.mind.ne.jp
CC- L in k Pa r tn e r Asso cia tio n Ho m e Pa g e Ad d r e s s
36
http://www.cc-link.org
37
CC-Link/LT Related Product Model List
CC-Link/LT Related Product Model List
CC-Link/LT Related Product Model List
Memo
Unit Type
Master module
Bridge unit
Remote
I/O unit
CL1PAD1
CL2GA13-60
Description
CC-Link/LT master module for Q series
CC-Link/LT master module for FX1N, FX2N, FX1NC, FX2NC
CC-Link-CC-Link/LT bridge unit
Input4 points: 24VDC
(used as either positive common or negative common type)
Output: 4 points, 24VDC (sink type), 0.1A transistor output
Output: 4 points, 30VDC, 250VAC or less, 2A relay output
Input: 8 points, 24VDC
(used as either positive common or negative common type)
Output: 8 points, 24VDC (sink type)
0.1A transistor output (with output protection)
Input: 4 points, 24VDC
(used as either positive common or negative common type)
Output: 4 points, 24VDC (sink type), 0.1A transistor output
Input: 4 points, 24VDC
(used as either positive common or negative common type)
Output: 4 points, 30VDC, 250VAC or less, 2A relay output
Input: 8 points, 24VDC (positive common type)
Output: 8 points, 24VDC (sink type)
0.1A transistor output (with output protection)
Input: 16 points, 24VDC (positive common type)
Output: 16 points, 24VDC (sink type)
0.1A transistor output (with output protection)
Input: 2 points, 24VDC (positive common type)
Output: 2 points, 24VDC (sink type), 0.1A transistor output
Input: 1 point, 24VDC (positive common type)
Output: 1 point, 24VDC (sink type), 0.1A transistor output
CL1PAD1 power supply adaptor for CC-Link/LT (5A)
Communication LSI for master station (in packs of 60)
CL2GA21-60
CL2GA21-300
Communication LSI for remote I/O station (in packs of 60)
Communication LSI for remote I/O station (in packs of 300)
Model
QJ61CL12
FX2N-64CL- M
AJ65SBT-CLB
CL1X4-D1B2
Terminal
block type
CL1Y4-T1B2
CL1Y4-R1B2
CL2X8-D1B2
CL2Y8-TP1B2
CL1XY8-DT1B2
CL1XY8-DR1B2
Sensor connector
type
CL2X8-D1C3V
CL2Y8-TP1C2V
MIL connector
type
CL2X16-D1M1V
CL2Y16-TP1M1V
Cable type
CL1X2-D1D3S
CL1Y2-T1D2S
CL1XY2-DT1D5S
Power supply adaptor
Communication CLC13
LSI for master
station
Communication CLC21
LSI for remote
I/O station
Accessory
Unit Type
Communication
connector
Cable
Terminating resistor
Open sensor
connector
Model
CL9-CNF-18
Description
Connector for connection of CC-Link/LT dedicated flat cable
CL9-FL4-18
CL9-RYVK
ECN-******
CC-Link/LT dedicated flat cable
CC-Link/LT dedicated terminating resistor
I/O connector for sensor connector type
*: Model changes depending on connector color and wire diameter.
IP Indication
IP2X
Reference Page
15
IP2X
19
IP2X
IP1X
IP2X
20
20
19
IP2X
21
IP2X
22
IP1X
22
IP2X
IP2X
25
25
IP2X
IP2X
27
27
IP2X
IP2X
IP2X
28
29
29
IP2X
30
31
31
31
IP Indication
IP2X
Reference Page
30
IP2X
IP2X
IP2X
30
30
30
Global Service Network
Global FA Center
North American FA Center
European FA Center
UK FA Center
Korean FA Center
Mitsubishi Electric Automation, Inc.
Mitsubishi Electric Europe B.V
German Branch
Mitsubishi Electric Europe B.V
U.K. Branch
Han Neung TECHNO Co., Ltd.
Shanghai FA Center
Ganglling Electric Technology
Development (Beijing) Co., Ltd.
Keling Electric (Shanghai) Co., Ltd.
Taipei FA Center
Setsuyo Enterprise Co., Ltd.
Asean FA Center
Mitsubishi Electric Asia Pte., Ltd.
Beijing FA Center
500 Corporate Woods Parkway
Vernon Hills, IL 60061
Gothaer Strasse 8. D-40880 Ratingen
Travellers Lane,
Hatfield, Herfordshire, AL10 8XB
Dongseo Game Channel Bldg. 2F, 660-11,
Deungchon-dong, Kangseo-Ku, Seoul 157-030
Office Building Room 954, New Century Hotel
NO.6 Southern Road, Capital Gym, Beijing,100044
Building Automation Instrumentation Plaza 2F Block5,
103 Cao Bao Rd. Shanghai 200233
6F NO.105 Wu-Kung 3rd. RD,
Wu-Ku Hsiang Taipei Hsine, Taiwan, R.O.C.
307 Alexandra Road #05-01/02
Mitsubishi Electric Building Singapore, 159943
Tel: +1-847-478-2311
Fax: +1-847-478-2253
Tel: +49-2102-486-0
Fax: +49-2102-486-7170
Tel: +44-1707-276100
Fax: +44-1707-278695
Tel: +82-2-3660-9607
Fax: +82-2-3663-0475
Tel: +86-10-6849-2077
Fax: +86-10-6849-2087
Tel: +86-21-6484-9360
Fax: +86-21-6484-9361
Tel: +886-2-2299-2499
Fax: +886-2-2299-2509
Tel: +65-6470-2480
Fax: +65-6470-7439
In FA centers, we offer the technical advice about our products and meet your demands concerned with repairs, field services and training.
38
39
Open Field Network
CC-Link/LT Compatible Product Catalog
Precautions for Choosing the Products
For safe use
To use the products given in this catalog properly, always read the "manuals" before
starting to use them.
This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in a device
or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric power,
aerospace, medicine or passenger movement vehicles, consult with Mitsubishi.
This product has been manufactured under strict quality control. However, when
installing the product where major accidents or losses could occur if the product fails,
install appropriate backup or failsafe functions in the system.
Mitsubishi will not be held liable for damage caused by factors found not to be the cause
of Mitsubishi; machine damage or lost profits caused by faults in the Mitsubishi products;
damage, secondary damage, accident compensation caused by special factors
unpredictable by Mitsubishi; damages to products other than Mitsubishi products; and to
other duties.
Country/Region Sales office
Tel/Fax
U.S.A
Mitsubishi Electric Automation Inc.
500 Corporate Woods Parkway Vernon Hills, IL 60061
Tel : +1-847-478-2100
Fax : +1-847-478-0328
Brazil
MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda.
Av. Rio Branco, 123-15 ,and S/1507, Rio de Janeiro, RJ CEP 20040-005, Brazil
Tel : +55-21-221-8343
Fax : +55-21-221-9388
Germany
Mitsubishi Electric Europe B.V. German Branch
Gothaer Strasse 8 D-40880 Ratingen, GERMANY
Tel : +49-2102-486-0
Fax : +49-2102-486-717
U.K
Mitsubishi Electric Europe B.V. UK Branch
Travellers Lane, Hatfield, Herts., AL10 8XB,UK
Tel : +44-1707-276100
Fax : +44-1707-278695
Italy
Mitsubishi Electric Europe B.V. Italian Branch
Centro Dir. Colleoni, Pal. Perseo - Ingr.2
Via Paracelso 12, 20041 Agrate B., Milano, Italy
Tel : +39-039-60531
Fax : +39-039-6053312
Spain
Mitsubishi Electric Europe B.V. Spanish Branch
Carretera de Rubi 76-80
08190 Sant Cugat del Valles, Barcelona, Spain
Tel : +34-935-653135
Fax : +34-935-891579
South Africa
Circuit Breaker Industries LTD
Tel : +27-11-928-2000
Private Bag 2016, Isando 1600, Johannesburg, South Africa
Fax : +27-11-392-2354
Hong Kong
Ryoden Automation Ltd.
10th Floor, Manulife Tower, 169 Electric Road, North Point, HongKong
Tel : +852-2887-8870
Fax : +852-2887-7984
China
Ryoden International Shanghai Ltd.
3F Block5 Building Automation Instrumentation Plaza 103
Cao Bao Rd. Shanghai 200233 China
Tel : +86-21-6475-3228
Fax : +86-21-6484-6996
Taiwan
Setsuyo Enterprise Co., Ltd.
6F., No.105 Wu-Kung 3rd.RD, Wu-Ku Hsiang, Taipei Hsine, Taiwan
Tel : +886-2-2299-2499
Fax : +886-2-2299-2509
Korea
HAN NEUNG TECHNO CO., LTD.
1F Dong Seo Game Channel Bldg., 660-11,Deungchon-dong Kangsec-ku,
Seoul, Korea
Tel : +82-2-3660-9552
Fax : +82-2-3664-8372
Singapore
Mitsubishi Electric Asia Pte, Ltd.
307 Alexandra Road #05-01/02,
Mitsubishi Electric Bulding Singapore 159943
Tel : +65-473-2480
Fax : +65-476-7439
Thailand
F. A. Tech Co.,Ltd.
898/28,29,30 S.V.City Building, Office Tower 2, Floor
17-18 Rama 3 Road, Bangkpongpang, Yannawa, Bangkok 10120
Tel : +66-2-682-6522
Fax : +66-2-682-6020
Indonesia
P.T. Autoteknindo SUMBER MAKMUR
Jl. Muara Karang Selatan Blok a Utara No.1 Kav.
No.11 Kawasan Industri/Pergudangan Jakarta-Utara 14440
Tel : +62-21-663-0833
Fax : +62-21-663-0832
India
Messung Systems Put,Ltd.
Electronic Sadan NO:111 Unit No15, M.I.D.C BHOSARI,PUNE-411026,India
Tel : +91-20-7128927
Fax : +91-20-7128108
Australia
Mitsubishi Electric Australia Pty. Ltd.
348 Victoria Road, PostalBag, No 2, Rydalmere, N.S.W 2116, Australia
Tel : +61-2-9684-7777
Fax : +61-2-9684-7245
Open Field Network
CC-Link/LT Compatible Product Catalog
Handy
Easy
He
nc
e
Ligh
its
t , T h i s i s " LT " !
ELECTRIC CORPORATION
HEAD OFFICE: 1-8-12,OFFICE TOWER Z 14F HARUMI CHUO-KU 104-6212,JAPAN
NAGOYA WORKS: 1-14,YADA-MINAMI 5,HIGASHI-KU,NAGOYA,JAPAN
When exported from Japan, this manual does not require application to the
Ministry of International Trade and Industry for service transaction permission.
Mitsubishi Electric Corporation Nagoya Works is a factory certified for ISO14001 (standards for environmental
management systems) and ISO9001 (standards for quality assurance management systems)
New publication,effective Aug. 2002
Specifications subject to change without notice.
Printed in Japan on recycled paper.
L(NA)-08026E-A 0208(MEE)
http://www.nagoya.melco.co.jp/english/