PACKAGE CONTENTS
NEED HELP?
If you have questions about this speaker, please go to www.juice-usa.com to view
product tutorials.
-Rechargeable Speaker
-3.5mm audio cable
-USB Charging cable
-User guide
-Microfiber Bag (MG4-CP Model Only)
CONTACTING JUICE CUSTOMER SERVICE
If you have questions, our trained Customer Service Department is happy to assist
you 24 hours a day, 7 days a week, every day of the year. Contact Juice Customer
Service as follows:
• In North America dial: 1-888-229-1459
• Email Juice at www.customer support@elexausa.com
User Manual
DO NOT RETURN THIS PRODUCT TO THE STORE OR WEBSITE FROM WHICH
IT WAS PURCHASED
If you believe the product is defective, has a missing or broken part or are having
difficulty with it, please contact Juice directly, 24 hours a day, 7 days a week, 365
days a year as listed above, for a quick and efficient solution to the problem.
LINE-IN
DC 5V
ON/OFF
PRODUCT DESCRIPTION
1. Line in
2. DC 5V charging jack
3. Power ON/OFF (Bluetooth mode and OFF )
LINE-IN
DC 5V
ON/OFF
BLUETOOTH PLAY MODE
BEFORE USE
1. Slide the power switch of the speaker to the ON position, the unit will “Beep” to show
it is in Bluetooth mode.
2. To sync the speaker with your music device go to the settings area where Bluetooth
devices are paired; select the listing for Juice MG4.
3. Enter the password “0000”. You will hear a sound indicating that the speaker
and music device have been paired. Once the sync has been established, it will not
be necessary to enter the password again.
NOTE : Do not tamper with the center tube at any time, damage to the tube will
NOTE : When the sound becomes distorted or the LED light starts flashing, indicates the
battery is low and the speaker needs to be recharged.
AUX PLAY MODE
CHARGING THE BATTERY
1. To use the included USB Charging cable, plug one end into the DC 5V jack located
at the bottom of the unit and the other end into a USB powered port or any other
USB AC adapter (not included).
2. The battery is fully charged in 1.5 hours.
3. The red LED light indicates that the unit is charging and turns off when the battery
is fully charged. You can disconnect the cable when charging is complete.
1. Plug one end of the included 3.5mm audio cable into the headphone or line-out
jack of your audio device.
2. Plug the other end of the cable into the LINE IN jack located on the back of the unit.
3. Slide the power switch of the speaker to the ON position.
4. Turn on your audio device and play music.
5. Adjust the volume of your audio device to the desired level.
6. Slide the power switch to the off position when you are finished listening.
Slide to the “ON” position to choose Bluetooth play mode.
Use LINE IN cable to plug into LINE IN jack will automatically
go to AUX play mode
LINE-IN
JUICE by Elexa: MG4, MG4-CP MICRO SPEAKER POD
The reception rage between the speaker and music device is 30 feet, however
different environments may affect this distance.
PLAY MODES
Make sure the speaker is in its open (expanded) position, it is already in this position
when you take it out of the package, if it is closed, follow these steps before use:
Grip the top and bottom of the unit and gently twist the top of unit counter-clockwise,
DO NOT pull hard once it is open, as it will automatically extend to the proper position.
To close the speaker:
Press the top and bottom of the unit together and twist the top of unit clockwise to
lock into place.
result in distorted sound and diminished sound quality. Keep the rubber feet of the
unit clean to reduce vibration. Use the speaker on smooth, clean surface, a textured
surface may result in unwanted vibration and diminished sound quality.
Pulling the expandable speaker into the open position
too forcefully may lead to permanent damage and void the warranty.
NOTE : When the sound becomes distorted or the LED light starts flashing, indicates the
battery is low and the speaker needs to be recharged.
440X230MM
DC 5V
ON/OFF
CONTROLS AND INDICATOR
1. Indicator
A green LED indicates the unit is powered on.
A red LED indicates the unit is charging but the battery is
not fully charged.
A flashing green LED indicates the battery is low and needs
to be recharged.