VX4012
7” Single DIN Multimedia Receiver
DVD / SiriusXM Ready™ / Built-In BT Technology /
iPhone® - iPod® / Pandora® / USB / AV In
Operation Manual
4VRMS
RCA Output
VX4012
Android is a trademark of Google Inc.
Sirius, XM and all related marks and logos are registered trademarks of Sirius XM
Radio Inc. All rights reserved.
microSD is a trademark or registered trademark of SD-3C, LLC in the United States,
other countries or both.
Pandora® is a registered trademark of Pandora Media, Inc.
2
VX4012
CONTENTS
Features ...��������������������������������������������������������������������������������������������������������������� 5
Controls and Indicators ..........������������������������������������������������������������������������������� 8
Remote Control ..... �����������������������������������������������������������������������������������������������10
External Devices ......�.�������������������������������������������������������������������������������������������14
Quick Start ................�.������������������������������������������������������������������������������������������15
Audio Equalizer .....................�.�����������������������������������������������������������������������������18
System Settings ....�.����������������������������������������������������������������������������������������������20
Disc Operation �.��������.....���������������������������������������������������������������������������������������29
AM-FM Radio ......................�.��������������������������������������������������������.������������������������41
USB / MicroSD card...............�.��������������������������������������........���������������������������������46
iPod®/ iPhone® Connectivity�.����������������������������������������.��������������������������������������51
AV-In1 / AV-In2 .....................�.�������������������������������������������������������������������������������55
HDMI / MHL Connectivity .....�.������������������������������������������������������������������������������56
BT / Hands Free Calling...........�.����������������������������������������������������������������������������.59
Rear Camera .........................�.�������������������������������������������������������������������������������67
Steering Wheel Controls (SWC) ..............................�.�������������������������������������������68
Pandora® Radio ..........................�������������������������������������������������.�����������������������.69
SiriusXM® Radio .......................�.��������������������������������������������������������������������������.73
User Uploadable Wallpaper ....�.��������������������������������������������������������������������������.86
Troubleshooting ......................�.��������������������������������������������������������������������������.87
Care and Maintenance .......�.���������������������������������������������������������������������������������91
Specifications �.���������������������������������������������.....����������������������������������������������������92
Notes �.����������������������������������������������������������...�������������������������������������������������������94
Common Replacement Parts����������������������������������������������������������������..Back Cover
3
VX4012
FCC Statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 centimeters between the radiator and your body.
“Made for iPod,” and “Made for iPhone” mean that an electronic accessory (This head unit) has
been designed to connect specifically to iPod®/, or iPhone® , respectively, and has been certified by
the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this head unit with iPod® or iPhone® may affect mobile
phone performance.
iPod®/ iPhone® are trademarks of Apple Inc., registered in the U.S. and other countries.
4
VX4012
Thank you for choosing a Jensen product. We hope you will find the instructions
in this owner’s manual clear and easy to follow. If you take a few minutes to look
through it, you’ll learn how to use all the features of your new Jensen VX4012
Multimedia Receiver for maximum enjoyment. Please save this manual for future
reference.
We recommend having your Jensen VX4012 Multimedia Receiver installed by
a reputable installation shop.
FEATURES
DVD
•
•
•
•
•
•
•
•
•
Audio Equalizer
Next Chapter and Previous Chapter
Play/Pause
Track Direct Entry
Disc Menu
Selection Repeat / Track Repeat
Disc Audio
Disc Language
Picture Control
CD / MP3 / WMA
•
•
•
•
•
•
•
CD-Text Compatible
ID3 Tag Compatible
Directory Search (MP3 / WMA Only)
Burn up to 1500 MP3 and WMA Files onto a DVD+R / RW
Audible Forward / Reverse Track Search (CD-DA Only)
Random, Repeat and Intro
Play, Pause, Stop, Next Track and Previous Track
AM-FM
•
•
•
•
•
USA, China, Japan, Europe, Europe (LW) and Orient (OIRT)
30 Station Presets (18 FM / 12 AM)
Auto Stereo / Mono
Local / Distance
Auto Store / Preview Scan
iPod®/iPhone®
• iPod®/ iPhone® via USB
• High Speed Direct Connect Interface to Access iPhone® and iPod® Playlists,
Artists, Albums
• Power Management Charges iPhone® / iPod® while Connected
5
VX4012
SiriusXM-Ready®
• Satellite Channel Name, Artist, Song, and Categories Displayed on Monitor
(Vehicle Tuner and Subscription required and sold separately)
Chassis
•
•
•
•
1.0 DIN (Import / ISO-DIN Mountable)
Motorized Flip-Out / Flip-Up TFT Screen
7” High Definition TFT LCD
800h x 480v x RGB WVGA
General
• Beep Tone Confirmation (ON-OFF Option)
• BT Hands-Free operation for safety and convenience and A2DP for streaming
music from your smartphone.
• One Composite Video Output for Additional Screens
• Front Panel Audio/Video Input
• Front Panel USB/MicroSD card - Playback Music / Video Files via Portable Hard
Drives / USB sticks.
• Ten-Band Graphic Equalizer
• 4VRMS Front / Rear / Subwoofer RCA Line Output
•
•
•
•
Rear Subwoofer Line Output
Rear Camera Input
Touch Screen Calibration Mode
Rotary Encoder Audio Control
• HDMI / MHL Connectivity - See and control smartphone apps on the larger
TFT screen. *Some apps may not be supported.
• USB Charging Current - 2.1 Amp Support
Rear Camera
• The VX4012 is “camera ready.” Before accessing any camera features, you must
purchase and install a rear video camera.
6
VX4012
WARNING! Never install this unit where operation and viewing could
interfere with safe driving conditions.
WARNING! To reduce the risk of a traffic accident (except when using for
rear view video camera) never use the video display function while driving
the vehicle. This is a violation of federal law.
WARNING! Never disassemble or adjust the unit.
WARNING! To prevent injury from shock or fire, never expose this unit to
moisture or water.
WARNING! Never use irregular discs.
WARNING! Using an improper fuse may cause damage to the unit and
result in fire.
7
VX4012
CONTROLS AND INDICATORS
OPEN
VX4012 Controls and Indicators
1. L
CD Screen and Touch Screen:
Touch icons on this screen to access menus or control functions.
2. Eject ( ) Button:
Press this button to eject a DVD/CD/MP3 disc. Disc play is stopped, the disc is
ejected and the unit will change to radio operation. If the disc is not removed
from the unit and the button is pressed again, the disc will be re-loaded. If the
disc is not removed from the disc slot within 10 seconds of being ejected, it
will be automatically reloaded to prevent it from being accidentally damaged.
8
VX4012
3. D
isplay (DISP) Button:
Touch to adjust the screen brightness.
Touch and hold to turn the screen off.
When the TFT is closed, press once and repeat to cycle through clock time,
metadata, RDS information, etc. The type of information displayed depends
upon the selected source
4. 3.5 mm AV IN Jack:
This connector accepts a 3.5 mm jack through which signals from various
audio/video devices can be applied to the unit.
5. Open Button:
Press to open/close the TFT/LCD screen.
6. Reset Button:
Press this button to reset the system settings (except password and parental
lock settings) and to correct a system halt or other illegal operation. Use the
tip of a pen to press the Reset button.
7. Micro SD Card slot:
Playback of music/video files.
8. USB slot:
Used to connect an iPod®, MP3 player or flash device connection adapter
for playback of music/video file .
9. Interface Cover:
Covers the MicroSD card slot, USB slot and Reset button.
10. Remote Sensor:
Used to receive command signals from the remote control.
) / Next (
) Buttons:
11. Previous (
) button to play the previous track on a disc.
Press the Previous (
) button to play the next track on a disc.
Press the Next (
12. Rotary Volume (
) Knob / Mute Button
Rotate the knob to adjust the volume from 0 to 50.
Press the knob momentarily to mute the audio. Press the knob again to
restore the audio.
13. SRC / Power On/Off ( ) Button
Press to turn the unit ON.
When on, press to switch the playing source.
Press and hold to turn the unit off.
14. Disc Slot:
Accepts DVD/CD/MP3 discs. If the unit is turned on, playback begins when a
disc is inserted.
9
VX4012
NOTES ON REMOTE CONTROL USAGE
• Aim the remote control at the TFT/screen.
• Remove the battery from the remote control or insert a battery insulator if
the remote control will not be used for a month or longer.
• DO NOT store the remote control in direct sunlight or in a high
temperature environment, or it may not function properly.
• The battery will last for 6 months under normal conditions. If the remote
control does not work, please change the battery.
• Use lithium battery type CR2025 (3V) only.
• DO NOT recharge, disassemble, heat or expose the battery to fire.
• Insert the battery in the proper direction according to the ( + ) and ( - ) polarity
marks.
• Store the battery in a place where children cannot reach it to avoid the risk
of an accident.
10
VX4012
Remote Control Functional Description
1.
SOURCE (SRC) Button: Press this button to switch between and select available
sources. (Radio/Disc/Phone/USB/Phone-Audio/SWC/AUX-1/AUX-2/Camera)
2. EJECT Button ( ): Press this button to eject a DVD/CD/MP3 disc. Disc play is
stopped, the disc is ejected and the unit will change to radio operation. If the
disc is not removed from the unit and the button is pressed again, the disc will
be re-loaded. If the disc is not removed from the disc slot within 10 seconds
of being ejected, it will be automatically reloaded to prevent it from being
accidentally damaged.
3. AUDIO Button: Press to display and select the audio language in DVD mode.
Each time the button is pressed, the language changes. NOTE: The languages
for audio vary from disc to disc.
4. VOLUME Button (VOL + and -): Press these buttons to increase or decrease
the playback volume.
5. BAND Button: Press this button to scroll though preset stations or when in
disc mode, this button is used for Fast playback / Slow playback. Press this
button to answer an incoming BT phone call.
6. REPEAT (RPT) Button: Repeat playback
7. MUTE Button: Press this button to turn the audio output ON and OFF.
8. POWER Button (
): Press this button to turn the unit ON and OFF.
9. SUBTITLE Button: Press to display and select the subtitle language in DVD
mode. Each time the button is pressed, the subtitle language changes. NOTE:
The type and number of languages for subtitles vary from disc to disc.
10. MENU Button: Press this button to access the root menu of a DVD or CD
during playback. The disc will return to normal playback and the root menu
will disappear if no selection is made within 10 seconds.
11. FAST FORWARD [ ] Button: Press this button to forward Disc play 2x, 4x, 8x
or 20x normal speed. Press this button while in Radio mode to search available
radio station by increasing tuning frequency.
11
VX4012
12. NEXT (uul) Button: Press this button to skip to the next chapter, track or
song during playback of a disc. Press this button while in Radio mode to
search available radio station by increasing tuning frequency.
13. PLAY / PAUSE (
) Button: Press this button to pause the playback of a
disc. Press this button again to resume normal playback.
14. PREVIOUS (ltt) Button:: Press this button to go back to the previous
chapter, track or song during playback of a disc. Press this button while in
Radio mode to search available radio station by decreasing tuning frequency.
] Button: Press this button to reverse Disc play 2x, 4x, 8x
15. FAST REVERSE [
or 20x normal speed. Press this button while in Radio mode to search available
radio station by decreasing tuning frequency.
16. NUMBER Buttons (1-6): Press these buttons to directly access chapters and
tracks, dialing phone numbers, or entering passwords.
17. RANDOM (RDM) Button: Press this button to play tracks or chapters in
random order while playing a disc.
12
VX4012
USING THE TFT MONITOR
Opening / Closing the TFT Monitor
Open the TFT Monitor
Press the OPEN button on the front panel to activate the mechanism that
moves the TFT screen into the viewing position.
Close the TFT Monitor
Press the OPEN button on the front panel to load the TFT screen back into the
compartment.
TFT Monitor Tilt Angle Adjustment
A known characteristic of TFT panels is that the quality of the display varies in
relationship to the viewing angle. To adjust the monitor angle for optimum
viewing:
1. Press and hold the OPEN button (> 1 second) on the front panel.
2. To adjust the tilt of the display panel, turn the rotary volume (
) knob.
3. To store the new tilt setting, press and hold the OPEN button again or let
the feature time out after 5 seconds. The rotary volume ( ) knob will
return to normal operation.
13
VX4012
EXTERNAL DEVICES
Connecting External Devices
External devices, including a game console, video camera, etc. can be connected
to this unit using its front A/V In 3.5mm connector (AV In1), the rear RCA inputs
(AV In 2) or the USB port.
You cannot directly control external devices connected to the A/V inputs using
the front panel controls or this unit’s remote control.
AV In 1
AV In1 is used for playback of audio/video from an external device connected to
the unit through a 3.5mm connector. The unit can increase or decrease the
volume of the connected device. All other controls are done on the connected
device. Select AV In1 to playback audio/video from the front panel 3.5mm AV In.
AV In 2
AV In2 is used for playback of audio/video from an external device connected to
the RCA connectors located on the back of the unit (see the VX4012 Installation
Guide). The unit can increase or decrease the volume of the connected device. All
other controls are done on the connected device. Select AV In 2 to playback audio/
video from the rear RCA AV In
1
2
3
4
Right Audio
Left Audio
Ground
V ideo
3.5mm A/V Cable (not included)
MicroSD card slot
USB Cable (not included)
Connecting External Devices
14
VX4012
QUICK START GUIDE
Turning the Unit ON or OFF
Press the front panel SRC / Power ( ) button to turn the unit ON. To turn the unit
OFF, press and hold the front panel SRC / Power ( ) button for 2 seconds.
Selecting an Audio/Video Source, Phone, Steering
Wheel Controls, Backup Camera or Pandora
To select a source by using the front panel SRC button or main menu screens:
1. Press the SRC button on the front panel to switch playing sources.
SRC
Button
VX4012 Front Panel
2. Touch the desired source icon on one of the two main menu screens.
Screen 1 of 2: Disc, Radio, USB, AV-IN1, Settings, Phone or Camera. Touch Next
at the bottom of the screen to access Screen 2 of 2: Steering Wheel Controls
(SWC), AV-IN2, Pandora or SiriusXM (SXM).
15
VX4012
System Settings Adjustment
To access and adjust system settings:
1. Touch the Settings (
) icon on the Main Menu screen to enter the SETTINGS
MENU. Sub-menus where adjustments can be made will be highlighted.
Volume Adjustment / Turn On Volume
To increase or decrease the volume level, rotate the rotary encoder knob. The
unit’s front panel screen will display the volume level for 2 seconds. The
volume level ranges from 0 to 50. To set the Turn-On volume, press and hold
the rotary encoder knob 1 second while the green volume bar is displayed
after setting the desired volume level. You will hear 2 beeps to confirm the
new Turn-On volume level.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The beep tone can be
disabled through the Setup menu.
Muting the Audio
Press the front panel Rotary Volume (
) knob / Mute button to mute the audio
from the unit. Mute icon is displayed on the LCD screen. Press the Rotary
) knob / Mute button again to restore the audio volume to its
Volume (
previous level. Adjusting the volume or using any of the audio setup features
cancels the mute function.
Equalizer Controls
Equalizer (EQ): Adjustment can be made after entering one of the audio/video
sources (Disc, Radio, USB, AV-IN or SXM).
Touch the Equalizer (EQ) icon to view the Equalizer Control Screen to select a
desired preset setting (Optimal, Classic, Rock, Jazz, Techno or Pop), Flat setting,
custom User setting, make adjustments to the audio Balance and Fade levels or to
turn the Loudness option ON or OFF. Touch the SRC icon to return to the current
source.
16
VX4012
Playing a Disc
To begin playback of an Audio/Video Disc:
1. Press the front panel Rotary Volume (
) knob / Mute button to turn the unit
ON.
2. Insert a disc with the label side facing up. Playback will begin automatically.
To eject a disc:
1. Press the front panel Eject ( ) button.
Resetting the System
Soft Reset - To correct a system halt or other illegal operation, use the tip of a pen
to press and release the reset button located just below the front panel interface
cover.
[RESET] Button
System Reset Button
After a system reset, the unit restores all factory default settings.
Note: If the unit is reset while a DVD is playing, the unit will return to Main Menu
once the reset is complete.
Parking Brake Inhibit
When the pink “Parking” wire is connected to the vehicle Parking Brake circuit, the
front TFT monitor will display video when the Parking Brake is engaged.
17
VX4012
EQUALIZER CONTROL MENU
Adjusting Equalizer Controls
The Equalizer adjustment screen allows the user to easily adjust the audio system
to meet the acoustical characteristics of the vehicle. The acoustical
characteristics vary depending on the type of vehicle and measurements.
The Balance/Fader levels and Loudness ON/OFF option of a selected audio/video
source (Disc, Radio, USB/iPod®, AV-IN1, AV-IN2 or SXM) is also adjusted through
the Equalizer adjustment screen.
Equalizer (EQ) (10 Band)
1.
Touch the Equalizer (EQ) icon to view and select a desired preset setting
(Optimal, Classic, Rock, Jazz, Techno or Pop) or Flat setting.
Note: The equalizer will automatically change to “USER” when individual
audio functions are adjusted.
Equalizer Adjustment Screen
2. Select a desired frequency range to be adjusted (31.5, 62.5, 125, 250, 500, 1K,
2K, 4K, 8K or 16K).
3. Touch and move the slide bar Up / Down to adjust the amount of boost/cut
from +10/-10dB.
User Setting
Touch the User icon to customize each of the equalizers 10 frequency bands.
Flat Setting
Touch the Flat icon to set the equalizers frequencies to the midpoint (0dB).
18
VX4012
Reset
Touch the Reset icon to reset the 10 equalizer band frequencies to the mid point.
Loudness
Touch the Loud icon to turn the loud option ON or OFF. The loud option
automatically alters the frequency response curve of audio to make it sound more
natural when played at a lower volume level.
Exiting the Equalizer
To exit the Equalizer menu touch the SRC icon to return to the current source.
Fader-Balance
Balance - Touch the FAD-BAL icon on the left side of the equalizer screen to
display the balance/fader screen.
Fade-Balance Adjustment Screen
Balance - This feature is used to balance the audio output levels between the
left and right side of the vehicle. Touch the t or u icons to change the balance
control settings -20 (Left) to +20 (Right). The setting can also be changed by
touching screen within the grid to move the sphere.
Fader - This feature is used to fade the audio output levels between the front and
rear of the vehicle. Touch the p or q icons to change the fade control settings -20
(Rear) to +20 (Front). The setting can also be changed by touching screen within
the grid to move the sphere.
Sub (Subwoofer) - This feature is used to reduce or increase the subwoofer sound
level. Touch the slide bar p or q icons to adjust the settings.
Exiting the Balance-Fader
To exit the balance-fader touch the SRC icon on the top left corner of the screen.
19
VX4012
SYSTEM SETTINGS
To access System Settings, touch the
icon on the Main Menu screen. There
are seven System Settings Sub-Menus (General, Audio, Time, Language, BT, DVD
or Volume) that are used to adjust the performance of each option of the
VX4012. The Version Sub-Menu is for information only. Touch a desired SubMenu and the Sub-Menu will appear highlighted. The features available for
adjustment will appear on the screen.
System Settings Screens
Adjusting a Sub-Menu Feature
1. Touch the Sub-Menu feature to be adjusted.
2. T ouch the p or q icon to view the previous or next feature page, if
applicable. An options list appears on the right.
3. Touch the desired feature option once to make selection then touch again to
confirm the selection.
General Sub-Menu Features - Radio Region/Frequency Spacing
USA - FM - 200kHz / AM - 10kHz
China - FM - 50kHz / AM - 9kHz
Japan - FM - 100kHz / AM - 9kHz
Europe - FM - 50kHz / AM - 9kHz
Europe (LW) - FM - 50kHz / AM - 9kHz / LW - 30kHz
OIRT - FM - 50kHz / AM - 9kHz / OIRT - 30kHz
Radio Lo/Dx - Touch the Distance or Local to increase or decrease radio tuning
sensitivity to receive local or distant stations.
TFT Standby - Touch OFF, 10s or 20s to set the unit’s front panel TFT LCD screen to
stay ON continuously or to blackout the screen after 10 or 20 seconds.
Display Adjust - Touch Night, Dark, Normal or Bright to set the unit’s front panel
TFT LCD screen to be adjusted for day and night conditions.
20
VX4012
Beep - Touch ON or OFF to turn the selection confirmation beep ON or OFF.
Wallpaper - Touch wallpaper selection to select wallpaper. Touch again
to confirm and set the wallpaper.
Calibration- The Touch Screen Calibration adjustment is used to set the
parameters of the touch screen to ensure that when the screen is touched, it
corresponds to the feature desired.
Note: Never use a pen or sharp object to calibrate the touch screen as this will
damage the panel.
1. Touch the Calibrate icon and the first screen will appear with instructions.
2. Follow the instructions on the screen touching and momentarily holding
finger or a stylus to the center of the target for 2 seconds. Repeat as the target
moves to each corner of the screen and finally to the center.
Calibration Screen
3. The second screen will appear:
Calibration Screen Confirmation
4. I f the screen is touched, the new calibration parameters will be accepted. If
the screen is not touched within thirty seconds, the new parameters will be
disregarded.
21
VX4012
Illumination - Customize the front panel illumination. Touch to change the
illumination color. Select a color or touch Custom > Adjust to select the color
palette.
UI Color - Touch green, red, amber, blue or purple to select the user
interface color. Touch again to confirm and set the color.
Demo - Touch ON or OFF to turn the demonstration mode ON or OFF. The factory
default setting is ON.
22
VX4012
Audio Sub-Menu Features
The Audio Sub-Menu is used to turn the Subwoofer output ON or OFF and
to select a Subwoofer crossover frequency.
Audio Sub-Menu Screen
Subwoofer - Touch ON or OFF to turn the subwoofer output ON or OFF.
Subwoofer Crossover - Touch a crossover frequency (80Hz, 120Hz or 160Hz)
to set a cut-off frequency for the subwoofer’s low-pass filter (LPF).
Time Sub-Menu Features
The clock appears in the top right corner of the screen during certain operations.
Note: The AM/PM indication will change as you continue to adjust the hour
past 12.
Time Sub-Menu Screen
Date - Touch the Date icon and use the p or q icons to set the day, month, and
year. After setting the date, touch Save. The date will appear to the right of the
Date option.
Clock Mode - Touch 12Hr to set the clock display to 12 hour time intervals using
AM and PM. Touch 24Hr to set the clock display to a 24 hour time interval (or
military time).
23
VX4012
Time - Touch the Time icon and use the p or q icons to set the hour, minute, and
either AM or PM. After setting the time, touch Save. The time will appear to the
right of the Date option.
Date Settings
Time Settings
Date and Time Setting Screens
Language Sub-Menu Features
If a DVD supports more than one Subtitle or Audio language, all the languages are
available for selection during playback. If the selected language is not supported
by the DVD, then the default language is used.
Language Sub-Menu Screen
On Screen Display (OSD) - Touch English, Spanish or French to select the
language for the OSD Display.
DVD Audio - If available, this feature allows the user to select one of the
languages contained on the disc for the DVD audio.
DVD Subtitle - If available, this feature allows the user to select one of the
languages contained on the disc for the DVD subtitles.
Disc Menu - Allows the user to select one of the languages contained on the disc
menu.
24
VX4012
BT Sub-Menu Features
The BT audio capabilities can be used for wireless phones hands free applications.
Before attempting to use the BT functions on this unit, please make sure the
wireless phone to be connected supports BT functions.
BT Pairing Code Screen 2
BT - Touch ON or OFF to turn the BT function ON or OFF.
Auto-Connect - Touch ON or OFF to turn the BT Auto-Connect function ON or
OFF.
Auto-Answer - Touch ON or OFF to turn the BT Auto-Answer function ON or
OFF.
Pairing - This feature allows the user to create a unique 4 digit code for
pairing BT devices to the unit. The factory default pairing code is “5309”.
1. Touch the Paring Code icon and the Pairing Code entry screen will appear.
2. Use the keyboard to enter a unique 4-digit Pairing Code.
3. Touch OK to confirm 4 digit pairing code.
NOTE: If a wrong digit is entered touching the arrow will remove the
number.
Pairing Code Entry Screen
Pairing Code Confirm tion Screen
Pairing Code Screens
25
VX4012
DVD Sub-Menu Features
The DVD system has a built-in parental lock feature to prevent unauthorized
persons from viewing restricted disc content. By default, the rating system is
unlocked. Once set up, the parental lock is released only by entering the correct
password. Once the password is entered, rating is available for setup.
DVD Sub-Menu Screen
Set Password - This feature allows the user to create a unique 4-digit password to
activate or deactivate the “Rating” option.
1. Touch the Set Password Code icon and the Password entry screen will appear.
2. Use the keyboard enter a unique 4 digit Password.
NOTE: If a wrong digit is entered touching the green arrow will remove the
number.
3. Touch OK to confirm 4 digit Password.
Password Entry Screen
Password Confirm tion Screen
DVD Password Screens
Rating Level - Select the appropriate rating level for the intended viewing
audience (Kid Safe, G, PG, PG-13, PG-R, R, NC-17, and Adult). The user may override
higher ratings by using the password.
DRC - This feature allows the user to turn the Dynamic Range Control ON for
better playback for low volumes or OFF.
26
VX4012
Load Factory - This feature allows the user to “Reset” to restore the factory default
settings (Rating system only).
To reset the password, access the “RATING” menu and enter the current password.
Once the correct password is entered, you can access the “Password” field and
enter a new one.
Note: Record the password and keep it in a safe place for future reference. The
rating for each disc is marked on the disc, disc package, or
documentation. If the rating is not available on the disc, the parental
lock feature is unavailable. Some discs restrict only portions of the disc,
allowing the appropriate content will play. For details, please refer to
the disc description.
Volume Sub-Menu Features
The Volume Sub-Menu allows the user to increase or decrease the relative
volume of the audio output of each source individually.
Volume Sub-Menu Screen 1
Volume Sub-Menu Screen 2
Volume Sub-Menu Screens
DVD - Touch the DVD icon to enter the setting, then use the p or q icons
increase or decrease the relative volume level between -6 to +6.
USB - Touch the USB icon to enter the setting of the connected device, then use
the p or q icons to increase or decrease the relative volume level
between -6 to +6.
Radio - Touch the Radio icon to enter the setting, then use the p or q icons
increase or decrease the relative volume level between -6 to +6.
BT - Touch the BT icon to enter the setting of the connected device, then use
the p or q icons to increase or decrease the relative volume level between
-6 to +6.
27
VX4012
AV-IN 1 - Touch the AV-IN 1 icon to enter the setting of the connected device
then use the p or q icons to increase or decrease the relative volume level
between -6 to +6.
AV-IN 2 - Touch the AV-IN 2 icon to enter the setting of the connected device
then use the p or q icons to increase or decrease the relative volume level
between -6 to +6.
Navigation - Touch the Navigation icon to enter the setting of the connected
device then use the p or q icons to increase or decrease the relative volume level
between -6 to +6.
iPod - Touch the iPod icon to enter the setting then use the p or q icons to increase
or decrease the relative volume level between -6 to +6.
SXM - Touch the SXM icon to enter the setting then use the p or q icons to increase
or decrease the relative volume level between -6 to +6.
The default relative volume level setting for all available sources is “0”.
Version Sub-Menu Features
The Version Sub-Menu is used to identify the model and resident
operating system as well as the hardware and software versions.
Version Sub-Menu Screen 1
Exiting the System Setup Menu
Version Sub-Menu Screen 2
To exit setup mode and resume normal playback, touch the SRC icon on the
screen.
28
VX4012
DISC OPERATION
Compatible Audio Discs Types
This system will play the following types of discs:
• DVD - DVDs that contain audio and/or video.
• Audio discs - Audio CDs that contain audio files.
• MP3 discs - A disc that contains audio, video and image files (for example, a
CD-R with downloaded MP3 files).
Note: This unit is designed to play pre-recorded (original) CD/DVDs. Some
burned CD/DVD's may not play due to different recording formats/speeds.
DVD Operation
Note: When properly installed, DVD video cannot be displayed on the
main TFT screen unless the parking brake is applied. If you attempt to
play a DVD while the vehicle is moving, the TFT screen displays:
Warning: It is illegal to view
video while driving or
operating a motor vehicle.
Set parking brake to view
video.
From the Main Menu Screen touch the DISC Icon or insert a disc into the disc slot,
label side up. Playback begins when a disc is inserted correctly.
DVD Main Menu
When a DVD is playing, touch the TFT LCD screen to view the DVD main menu. The
on-screen icons and touch key areas are outlined below.
DVD Main Menu
SRC Icon - Touch this icon to return to the Main Menu Screen.
DVD - Displays the current source.
29
VX4012
Title/Chapter Information - The title/chapter information displayed is the current
number of the track playing, the total number of tracks on the disc, the current
chapter playing and the total number of chapters on the disc.
Time Display - This indicator displays the time as entered by the user in the
Settings Menu.
Chapter Elapsed Playback Time - The elapsed playback time of chapter is
displayed on the screen.
Total Playback Time - The total playback time of disc is displayed on the screen.
More ( p/q ) - Touch the p/q icons to display the next or previous page of the
Disc menu.
( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.
(See “Adjusting Equalizer Controls”)
(
) Previous - Touch this icon to play the previous track.
(
) Play/Pause - Touch this icon to begin disc playback. Touch this icon again to
pause disc playback.
) Next - Touch this icon to play the next track.
(
Direct Entry - Touch this icon to the display the Direct Entry Screen.
Menu - Touch this icon to view the DVD root menu.
A-B - Touch to repeat a specific portion from point A to point B of the disc.
During playback touch A-B to set the starting point A. Touch A-B a second time
to set the ending point B. The player will repeatedly play the part between Point
A and Point B. Touch A-B a third time to cancel A-B repeat and resume playback.
Audio - Touch this icon to select an audio language for DVD playback. The audio
language selection depends on the languages contained on the disc.
Language - Touch this icon to select a subtitle language for DVD playback. The
subtitle language selection depends on the languages contained on the disc.
30
VX4012
(
) Repeat - Touch this icon during playback to repeat the current chapter.
The icon on the screen will light and small letter C will appear below the icon and
the chapter will repeat. Touch this icon a second time to repeat the current title.
The icon on the TFT LCD screen will light and small letter T will appear below the
icon and the title track will repeat. Touch the icon a third time to repeat the title
and chapter. The icon on the main TFT LCD screen will light and small letter A will
appear below the icon and the title and chapter will repeat. Touch the icon again
the repeat function will be cancelled. The icon on the main TFT LCD screen will
dim and playback of the remainder of the disc will resume.
PIC - When the PIC icon is touched the picture adjust screen appears. Touch this
icon during playback to adjust the color brightness, contrast, saturation and hue.
The levels can be adjusted to suit the users preferences. The adjustments are
accomplished by touching the + or - icons to decrease or increase the desired
setting. The settings have range of 1 to 20.
Note: The Picture Adjustment Screen will turn OFF automatically if no
adjustment is made within five seconds or if any other part of the screen is
touched.
DVD Picture Adjustment Screen
31
VX4012
Direct Entry
When the Direct Entry icon is touched the Direct Entry Screen appears. The user
can manually select a title or a chapter. By touching q icon, the user can select a
chapter or title. The title or chapter can be selected by touching the corresponding
number for a title or chapter. After entering the numbers, touch the OK icon. If a
wrong digit is entered, touching the arrow will remove the number. After touching
OK, playback will begin.
DVD Chapter and Title Direct Entry Screen
Inserting a Disc
Upon inserting a DVD disc, DVD mode is entered and disc play begins. A disc
cannot be inserted if there is already a disc in the unit or if the power is off.
Note: If Parental Lock (Rating) is activated and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc must be
authorized.
Note: DVD-R and DVD-RW will not play unless the recording session is
finalized and the DVD is closed.
Ejecting a Disc- Press the Eject ( ) button on the front of the unit to eject
the disc. The unit automatically reverts to Tuner mode. To eject a disc with the
unit powered off, press the Eject button two times. The unit will remain off
after the disc is ejected.
Resetting the Loading Mechanism - If the disc loads abnormally or an abnormal
core mechanism operation occurs, press and hold the Eject ( ) button on the
front of the unit to reset the loading mechanism. Normal operation resumes.
Accessing DVD Mode - To switch to DVD mode when a disc is already inserted,
touch SRC on the TFT LCD screen to access the source menu. Touch the disc icon.
32
VX4012
Multi-Language Discs (DVD Only)
Changing Audio Language - If you are watching a disc recorded in multiple
languages, touch the TFT LCD screen, then touch AUDIO to choose a language.
Each time the icon is touched the language will change.
Changing Subtitle Language - If you are watching a disc recorded in multiple
languages with subtitles, touch the TFT LCD, then touch Language screen to
choose the language that you would like the subtitles to appear.
Playback Information
During DVD and VCD playback, touch the TFT LCD screen to display playback
information on the screen, including the current playback time.
DVD Playback Information
• DVD Video – Format of current disc.
• Time 00:01:30/00:36:10 – Indicates the playback time of the current track.
• Title 5/08 – Indicates the fifth of 8 titles on the DVD is currently playing.
• Chapter 2/16 – Indicates that the second of 16 chapters on the DVD is currently
playing.
VCD Playback Information
• VCD2.0 – Format of current disc.
• Time 00:01:30/00:36:10 – Indicates the playback time of the current track.
33
VX4012
General Disc Information
Disc Properties
Symbol
12cm Disc Properties
Max Play Time
Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)
(MPEG 2 Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer (VCD)
(MPEG 1 Method)
74 minutes
Single side single layer
74 minutes
Disc Symbols
Symbol
Meaning
Number of voice languages recorded. The number inside the icon
indicates the number languages on the disc (maximum of 8).
Number of subtitle languages available on the disc (maximum of 32).
Number of angles provided (maximum of 9).
Aspect ratios available. “LB” stands for Letter Box and “PS” stands for
Pan/Scan. In the example on the left, the 16:9 video can be converted
to Letter Box video.
Indicates the region code where the disc can be played.
• Region 1: USA, Canada, East Pacific Ocean Islands
• Region 2: Japan, Western Europe, Northern Europe, Egypt, South
Africa, Middle East
• Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia,
South-East Asia
• Region 4: Australia, New Zealand, Middle and South America,
South Pacific Ocean Islands/Oceania
• Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe,
North Korea, North Africa, North-West Asia
• Region 6: Mainland China
• ALL: All Regions
34
VX4012
CD Operation
From the Main Menu Screen touch the DISC icon or insert a CD into the disc slot,
label side up. Playback begins in CD mode when a disc is inserted correctly.
CD Main Menu
The on-screen icons and touch key areas are outlined below.
CD Main Menu
SRC Icon - Touch this icon to return to the Main Menu Screen.
DISC - Displays the current source.
Track Number- Lists the current track playing and the total number of tracks
contained on the disc.
Time Display - This indicator displays the time as entered by the user in the
Settings Menu.
CD Disc Information Display - Displays the artist, the title of the track and the
title of the album.
More ( p/q ) - Touch the p/q icons to display the next or previous page of the
Disc menu.
(
) Previous - Touch this icon to play the previous track.
) Play/Pause - Touch this icon to begin disc playback. Touch this icon again to
(
pause disc playback.
(
) Next - Touch this icon to play the next track.
35
VX4012
List - Touch this icon to access the list of tracks contained on the disc. Touch a
desired track icon twice and the track will begin playing.
(
) Shuffle - Touch this icon to play tracks in the directory in a random
order. The icon will light on the main CD screen.
(
) Repeat - Touch this icon to repeat playback of the current track. The icon
on the TFT LCD screen will light and small number 1 will appear below the icon
and the track will repeat. Touch this icon a second time and the album will repeat.
The icon on the TFT LCD screen will light and small letter a will appear below the
icon and the album will repeat. Touch the icon again the repeat function will be
cancelled. The icon on the TFT LCD screen will dim and playback of the remainder
of the disc will resume.
( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.
(See “Adjusting Equalizer Controls”)
Direct Entry - Touch this icon to the display the Direct Entry Screen.
Track Elapsed Playback Time - The elapsed playback time of track is displayed on
the on the TFT LCD screen.
Track Total Playback Time - The total playback time of track is displayed on the
main CD screen.
36
VX4012
CD List
Touching the List icon will display the CD List Screen. The CD List Screen illustrates
the contents of a CD disc. The contents are divided into folders and various file
types. Touching the icon will display the files present on the disc.
CD List Screen
( ) Audio Files - Touch the audio file icon to display the audio file. Touch the
audio file icon to select a track. Touch the audio file icon again to confirm and
playback will begin.
( ) Video Files - Touch the video file icon to display the video file. Touch the
video file icon to select a video file. Touch the video file icon again to confirm
and playback will begin.
( ) Image Files (JPEG etc) - Touch the image icon to display a folder or
individual JPEG file. Touch the image icon to select a folder or an individual JPEG
file. In the case of a JPEG folder touch the folder icon twice and the contents of
the folder will be displayed. Touch the JPEG image icon to select and view an
individual JPEG file.
( ) Folders - Touch the icon to display the folder/file hiearchy. Touch the folder
icon twice and the contents of the folder will be displayed. Touch the file icon to
select a file. Touch the icon again to confirm and open the file.
37
VX4012
Track Direct Entry
When the Direct Entry icon is touched the Direct Entry Screen appears. The user
can manually select a track by touching the corresponding number. After entering
the track numbers touch the OK icon. If a wrong digit is entered touching the
arrow will remove the number. After touching OK playback will begin.
CD Track Direct Entry Screen
Controlling Playback
Inserting a Disc - Upon inserting a CD, disc play begins. You cannot insert a disc if
there is already a disc in the unit or if the power is off.
Ejecting a Disc - Press the Eject ( ) button on the front of the unit to eject the
disc. The unit automatically reverts to Tuner mode. You may eject a disc with
the unit powered off. The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism - If the disc loads abnormally or an abnormal
core mechanism operation occurs, press and hold the Eject ( ) button on the
front of the unit to reset the loading mechanism. Normal operation resumes.
Pausing Playback - Touch the Play/Pause (
play.
) icon to suspend or resume disc
Moving Through Tracks - Touch the Next ( ) icon to advance to the next track
on the disc. Touch the Previous ( ) icon to move to the previous track.
icon to alter repeat mode according to the
Repeat Playback - Touch the
following:
• CD-DA: Repeat Track > Repeat Album > Repeat Off
• CD-R/RW: Repeat Track > Repeat Album > Repeat Off
Random Play Select - Touch the Random ( ) icon to play the tracks on the disc
in a random, shuffled order. Touch the Random ( ) icon again to cancel Random
Play mode.
Note: CD-R and CD-RW will not play unless the recording session is finalized.
38
VX4012
MP3 / WMA Operation
MP3 is a format for storing digital audio. An audio CD-quality song can be
compressed into the MP3 format with very little loss of quality, while taking up
much less space. Insert a MP3 Disc into the disc slot, label side up. Playback begins
in MP3 mode when a disc is inserted correctly. The unit plays the songs in the
order they were burned on to the disc. The menu for playing audio MP3 music files
is the same as previously described for CD discs.
Media and File Requirements
This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs,
DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted
using the full method and not the quick method to prevent illegal disc operation.
For the greatest file capacity, Dual Layer DVD’s can be used when burning music to
a disc.
MP3 Format Compatibility
The file naming formats listed below are compatible with this unit:
• ISO 9660 – file name: 12 characters, file extension: 3 characters
• ISO 9660 – file name: 31 characters, file extension: 3 characters
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file system standards, it
may not be displayed or played back correctly. Use the following settings when
compressing audio data for your MP3 disc:
• Transfer Bit Rate: 128kbps
• Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity, disable additional writing.
For recording on an empty disc up to maximum disc capacity, use the “Disc at
once” setting.
MP3 Playing Order
When selected for play, files and olders are accessed in the order they were
written by the CD writer. As a result, the order in which they are expected to be
played may not match the order in which they are actually played. You may be
able to set the order in which MP3/WMA files are to be played by writing them
onto a medium such as a CD-R with their file names beginning with play
sequence numbers such as “01” to “99”.
39
VX4012
Controlling Playback
Inserting a Disc- Upon inserting a MP3/WMA disc, disc play begins. You cannot
insert a disc if there is already a disc in the unit or if the power is off.
Ejecting a Disc - Press the Eject ( ) button on the front of the unit to eject the disc.
The unit automatically reverts to Tuner mode. You may eject a disc with the unit
powered off. The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism - If the disc loads abnormally or an abnormal
core mechanism operation occurs, press and hold the Eject ( ) button on the
front of the unit to reset the loading mechanism. Normal operation resumes.
Playing MP3 / WMA Files - After inserting a MP3/WMA disc, files will play
in the sequence of the “Root’ directory.
Note: When burning MP3 / WMA files onto a DVD disc, use folders when
burning large numbers of songs / files to a disc for easy music navigation.
Select the “Disc at Once” option and close your disc.
Note: CD-R and CD-RW will not play unless the recording session is finalized.
Pausing Playback - Touch the Play/Pause (
playback.
) icon to suspend or resume
Moving Through Tracks - Touch the Next ( ) icon to advance to the next track
Touch the Previous ( ) icon to move to the previous track on the MP3 disc.
Repeat Playback - Touch the Repeat ( ) icon to alter repeat mode as follows:
Repeat Single > Repeat Folder > Repeat All > Repeat Off.
Random Play Select - Touch the Random (
) icon to play the tracks on the
MP3 disc device in a random, shuffled order. Touch the Random (
) icon again
to cancel Random Play mode.
40
VX4012
RADIO TUNER OPERATION
From the main menu screen touch the radio icon. The radio tuner display screen
appears.
Radio Tuner TFT Display
The on-screen icons and touch key areas are outlined below.
Radio Tuner TFT Display Screen
SRC Icon - Touch to view the SOURCE MENU and select a new playback source.
Radio - Displays the current source.
Time Display - This indicator displays the time as entered by the user in the Settings
Menu.
Preset List - Provides a display of the preset frequencies. Touch to recall a preset
station. The radio can store 6 FM1, 6 FM2, 6 FM3, 6 AM1, and 6 AM2 frequency
presets.
Local / Distance - Displays the Local /Distance setting.
RT (Radio Text) - Allows a radio station to transmit a 64-character free-form text
that can be either static (such as station slogans) or in sync with the programming
(such as the title and artist of the currently playing song).
PS (Program Service) - An eight-character static display that represents the call
letters or station identity name. Most RDS capable receivers display this information.
Touch "PS" or "RT" to alternate between RT / PS / PTY feature.
Stereo - Displays stereo radio signal reception.
FM1 - Displays the current preset frequency band.
P1 through P6 - Displays the current preset frequency within the preset
frequency band that currently playing.
107�7 MHz - Displays the radio station frequency that is currently playing.
41
VX4012
More ( p/q ) - Touch the p/q icons to display the next or previous page of the
Disc menu.
(
) Seek Down / Manual Seek - Touch this icon to seek the previous available
radio station. Touch and hold this icon (Until "Manual Seek -" is displayed) to
manually tune the radio in increments. Default Seek Down mode is resumed
after 5 seconds of inactivity.
( AS ) Auto Store - Touch to automatically search and store all strong stations.
(
) Seek Up / Manual Seek - Touch this icon to seek the next available radio
station. Touch and hold this icon (Until "Manual Seek +" is displayed) to manually
tune the radio in increments. Default Seek Up mode is resumed after 5 seconds of
inactivity.
Band - Touch to change between AM/FM bands.
Option - Touch this icon to display the Options screen.
Save - Touch this icon to save a radio station frequency in one or all six preset
stations on FM band 1, 2, 3 or AM band 1 and 2.
Local (LO) / Distance (DX) - Touch to select and activate local and distance
station reception. When the Local function is on, only radio stations with a
strong radio signal are tuned in.
Direct Entry - Touch this icon to the display the Direct Entry Screen.
( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.
Option Screen
Touching the Options icon will display the following RDS, CT and PTY functions on
the Tuner TFT LCD display screen.
Radio Tuner Option Screen
42
VX4012
RDS ON / OFF - Radio Data System (RDS) is a communications protocol
standard for embedding small amounts of digital information in conventional
FM radio broadcasts.
CT ON / OFF - (Clock Time) Some stations broadcast the time and date within
the encoded RDS signal. The clock time is automatically adjusted when ‘CT’ is
set to ‘ON’.
Note: Stations broadcasting close to time zones may not broadcast the
correct time in your particular area. In this case, turn CT Off and manually
set the time.
PTY - The Program Type (PTY) function displays the program category of the
current station such as category (news, sports, talk etc.) Use the scroll bar to select
various categories. Touching the Back icon returns the user to main tuner screen.
PTY Screen
There are 27 categories in the PTY function.
1. None
8. Adult Hits
15. Jazz
22. Personality
2. News
9. Soft Rock
16. Classic
23. Public
3. Info
10. Top 40
17. RGB
24. College
4. Sports
11. Country
18. Soft RGB
25. Weather
5. Talk
12. Oldies
19. Language
26. Test
6. Rock
13. Soft
20. Religious Music
27. Alert
7. Classic Rock
14. Nostalgia
21. Religious Talk
43
VX4012
Direct Entry Tuning
When the Direct Entry icon is touched the Direct Entry Screen appears. The user
can enter the desired radio station frequency using the on-screen number pad.
After entering the radio station frequency touch the OK icon. If a wrong digit is
entered touching the green arrow will remove the number. After touching OK the
radio will tune to the entered station. Playback will begin.
Radio Direct Entry Screen
Using Preset Stations
Six numbered preset icons store and recall stations for each band. All six stored
stations (P1 through P6) for the current band appear on the screen.
Storing a Station
1.
Select a band (if needed), then tune to a desired radio station frequency.
2. Touch the on-screen Save icon. The following screen will appear.
Preset Save Screen
44
VX4012
3. T ouch the preset number in which you would like to store the current
station. The station frequency is displayed at the top of the menu. The preset
number will appear highlighted. The station frequency will be stored in the
highlighted preset. The station will be displayed Tuner TFT LCD screen. Station
can also be stored by touching and holding the preset icon to store the station
currently tuned as a preset.
Recalling a Station
1. Select a preset band (if needed).
2. T ouch an on-screen preset icons (P1 through P6) to select the corresponding
stored station.
Auto Store (AS)
Preset Station Screen
To select six strong stations and store them in the current band. This feature is most
useful when travelling in an area where you are not familiar with the local stations.
1. Select a band (if needed).
2. Touch the AS icon to activate the Auto Store function. FM Band 1 will be filled
if enough stations are detected. The AM Bands function in a similar manner.
As new stations are found they will replace stations already stored in that
band.
Note: If stations have already been set as favorites, activating the AutoStore feature will erase those stations and enter the new strong stations.
Local (LOC) / Distance (DX) Settings
When the Local function is on, only radio stations with a strong radio signal are
played. To activate the Local function in the AM/FM tuner mode, touch "More" on
the Tuner user interface (UI) screen. The Local/Distance icon is displayed. Touch
Local / Distance to turn the function ON or OFF. When the Local or Distance
function is active, the Local / Distance text in the UI is displayed.
45
VX4012
USB / MicroSD Card OPERATION
The unit will read the audio/video files on USB / MicroSD card devices
automatically.
NOTE: The USB port will recognize most USB flash memory devices and
portable hard drives. Hard drives must be formatted to FAT32. NTFS is not
supported. Up to 32GB SD cards are supported.
Inserting / Removing a USB / MicroSD card Device
To insert a USB device:
1. Locate the Interface Cover on the front of the radio.
1
2
3
4
Right Audio
Left Audio
Ground
V ideo
3.5mm A/V Cable (not included)
MicroSD card slot
USB Cable (not included)
USB Slot and microSD Card Slot Location
2. Lift the protective cover to reveal the USB slot.
3. Insert the USB device into the USB port.
46
VX4012
USB / MicroSD Card Operation
From the main menu screen touch the USB icon.
USB / MicroSD Card Main Menu
The on-screen icons and touch key areas are outlined below.
USB Main Menu
SRC Icon - Touch this icon to return to the Main Menu Screen.
Scrolling Display - Displays current track information.
Track Number - Lists the current audio track playing and the total number of
audio tracks in audio mode. Lists the current video folder and the total number of
video folders in video mode.
Time Display - This indicator displays the time as entered by the user in the
Settings Menu.
More ( p/q ) - Touch the p/q icons to display the next or previous page of the
USB menu.
(
) Previous - Touch this icon to play the previous track.
) Play/Pause - Touch this icon to begin playback. Touch this icon again to
(
pause playback.
(
) Next - Touch this icon to play the next track.
47
VX4012
List - Touch this icon to access the list of audio and video files contained on the
USB device. Touch a folder icon and the contents of the folder will be displayed.
Touch a desired track icon twice and the track will begin playing.
(
) Shuffle - Touch this icon to play audio or video tracks in a random order.
The icon will light on the main TFT LCD screen.
(
) Repeat - In audio mode touch this icon to repeat playback of the current
audio track. The icon on the main TFT LCD screen will light and a small letter A
will appear below the icon and the all the audio tracks will repeat. Touch this
icon again and single track will repeat. The icon on the TFT LCD screen will light
and small number 1 will appear below the icon. Touch the icon again the repeat
function will be cancelled. The icon on the main TFT LCD screen will dim and
playback of the remainder of the tracks will resume.
In video mode touch this icon during playback to repeat the current track. The
icon on the main TFT LCD screen will light and small number 1 will appear below
the icon and the track will repeat. Touch the icon again to repeat all the tracks
will repeat. The icon on the main TFT LCD screen will light and small letter A will
appear below the icon and all the tracks will repeat. Touch the icon again the
repeat function will be cancelled. The icon on the main TFT LCD screen will dim
and playback of the remainder of the tracks will resume.
( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.
(See “Adjusting Equalizer Controls”)
Direct Entry - Touch this icon to the display the Direct Entry Screen.
48
VX4012
USB / MicroSD card List
Touching the List icon will display the USB List Screen. The USB List Screen
illustrates the audio and video files present in the USB device. The contents are
divided into folders and various file types. The file types consist of audio and
video files. Touching the folder icon will display the files present in the folder.
USB List Screen
( ) Audio Files - Touch the audio file icon to display the audio file. Touch the
audio file icon to select a track. Touch the audio file icon again to confirm and
playback will begin.
( ) Video Files - Touch the video file icon to display the video file. Touch the
video file icon to select a video file. Touch the video file icon again to confirm
and playback will begin.
( ) Image Files (JPEG etc) - Touch the image icon to display the image file.
Touch the image file icon to select an image file. Touch the image file icon
again to confirm and view the image.
(
) Folders - Touch the icon to display the folder/file hiearchy. Touch the folder
icon and the contents of the folder will be displayed. Touch the file icon to select
a file. Touch the icon again to confirm and open the file.
49
VX4012
Direct Entry
When the Direct Entry icon is touched the Direct Entry Screen appears. The user
can manually select a track by touching the corresponding number. After entering
the track numbers touch the OK icon. If a wrong digit is entered touching the
arrow will remove the number. After touching OK playback will begin.
USB Track Direct Entry Screen
Moving Through Tracks
Touch the Next ( ) icon to advance to the next track on the USB device.
Touch the Previous ( ) icon to move to the previous track on the USB device.
Pausing Playback
Touch the Play/Pause (
) icon to suspend or resume playback.
PIC - When the PIC icon is touched the picture adjust screen appears. Touch this
icon during playback to adjust the color brightness, contrast, saturation and hue.
The levels can be adjusted to suit the users preferences. The adjustments are
accomplished by touching the + or - icons to decrease or increase the desired
setting. The settings have range of 1 to 20.
USB Picture Adjust Screen
Note: The Picture Adjustment Screen will turn OFF automatically if no
adjustment is made within five seconds or if any other part of the screen is
touched.
50
VX4012
iPod® / iPhone® Controls
Accessing iPod® Mode
The user can control an iPod®/iPhone® using the touch screen to access,
albums, songs, etc.
The unit will automatically switch to iPod® mode when an iPod®nano, iPod®
touch or iPhone® is plugged into the front panel USB connector. Also the iPod®
can be accessed from the Main Menu Screen by touching the iPod® icon (only
available when an iPod® or iPhone® is connected to the front panel USB
connector).
iPod® / iPhone® Main Menu
The on-screen icons and touch key areas are outlined below.
iPod®/iPhone® Main Menu
SRC Icon - Touch this icon to return to the Main Menu Screen.
iPod - Displays the current source.
Track Number - Lists the current audio track playing and the total number of
audio tracks in audio mode. Lists the current video folder and the total number of
video folders in video mode.
Time Display - This indicator displays the time as entered by the user in the
Settings Menu.
More ( / ) - Touch the / icons to display the next or previous page of the
iPod® menu.
51
VX4012
(
) Previous - Touch this icon to play the previous track.
(
) Play/Pause - Touch this icon to begin playback. Touch this icon again to
pause playback.
(
) Next - Touch this icon to play the next track.
List - Touch this icon to access the list of audio and video files contained on the
iPod®. Touch a folder icon and the contents of the folder will be displayed. Touch a
desired track icon twice and the track will begin playing.
(
) Shuffle - Touch this icon to play audio or video tracks in a random order.
The icon will light on the main TFT LCD screen.
(
) Repeat - In audio mode touch this icon to repeat playback of the current
audio track. The icon on the TFT will display and a small letter "A" will appear
below the icon and the all the audio tracks will repeat. Touch this icon again
and single track will repeat. The icon on the TFT will display and small number
"1" will appear below the icon. Touch the icon again the repeat function will be
cancelled. The icon on the main TFT LCD screen will dim and playback of the
remainder of the tracks will resume.
( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.
(See “Adjusting Equalizer Controls”)
Direct Entry - Touch this icon to the display the Direct Entry Screen.
iPod® List
Touching the List icon will display the iPod® List Screen. The iPod® List Screen
illustrates the audio and video files present in the iPod®. The contents are
divided into folders and various file types. The file types consist of audio and
video file. Touching the folder icon will display the files present in the folder.
iPod®/iPhone® List Screen
52
VX4012
( ) Audio Files - Touch the audio file icon to display the audio file. Touch the
audio file icon to select a track. Touch the audio file icon again to confirm and
playback will begin.
( ) Video Files - Touch the video file icon to display the video file. Touch the
video file icon to select a video file. Touch the video file icon again to confirm
and playback will begin.
( ) Image Files (JPEG etc) - Image files are selected and controlled by the
iPod®.
( ) Folders - Touch the icon to display the folder/file hiearchy. Touch the folder
icon and the contents of the folder will be displayed. Touch the file icon to select
a file. Touch the icon again to confirm and open the file.
Controlling Playback
Direct Entry
When the Direct Entry icon is touched the Direct Entry Screen appears. The user
can manually select a track by touching the corresponding number. After entering
the track numbers touch the OK icon. If a wrong digit is entered touching the
arrow will remove the number. After touching OK playback will begin.
iPod®/iPhone® Track Direct Entry Screen
Moving Through Tracks
Touch the Next ( ) icon to advance to the next track on the iPod®.
Touch the Previous ( ) icon to move to the previous track on the iPod®.
53
VX4012
Pausing Playback
Touch the Play/Pause (
) icon to suspend or resume playback.
PIC - When the PIC icon is touched the picture adjust screen appears. Touch this
icon during playback to adjust the color brightness, contrast, saturation and hue.
The levels can be adjusted to suit the users preferences. The adjustments are
accomplished by touching the + or - icons to decrease or increase the desired
setting. The settings have range of 1 to 20.
Note: The Picture Adjustment Screen will turn OFF automatically if no
adjustment is made within five seconds or if any other part of the screen is
touched.
iPod®/iPhone® Picture Adjust Screen
54
VX4012
Connecting External Devices
AV In 1 / AV In 2
AV In 1
AV In 1 is used for playback of audio/video from an external device connected to
the unit through a 3.5mm jack located on the front panel. The unit can increase
or decrease the volume of the connected device. All other controls are done on
the connected device.
AV In 1 Screen (No Signal)
AV In 2
AV In 2 is used for playback of audio/video from an external device connected
through RCA connectors located on the back of the unit. The unit can increase or
decrease the volume of the connected device. All other controls are done on the
connected device.
AV In 2 Screen (No Signal)
NOTE: Audio/Video devices must be connected to this unit using an audio/
video adapter cable that is available separately.
NOTE: Video will only play when the vehicle parking brake is engaged. The
parking brake wire must be connected for this feature to operate.
55
VX4012
Using a Smartphone via HDMI / MHL
What is HDMI? HDMI (High Definition Multimedia Interface) is a digital interface
for audio and video sources. HDMI is a digital replacement for analog video
standards (Such As "Audio-Video Input" via RCA Cables).
What is MHL? MHL (Mobile High-Definition Link) is an industry standard for a
mobile audio / video interface that allows consumers to connect mobile phones,
tablets, and other portable consumer electronics (CE) devices to high-definition
televisions (HDTVs) and mobile multimedia receivers.
HDMI / MHL allows you to use the multimedia touch screen to control your
mobile device.
Note: It may not be legal to view apps on a smartphone while driving or
controlling a vehicle. It is the drivers responsibility to obey local and federal
laws while driving or controlling a vehicle.
Interfacing your Smartphone - Android
Depending on your model and brand of smartphone HDMI / MHL may not be
supported. Check your smartphone documentation for supported features.
Most Android smartphones will require an app that must be downloaded from
Google Play Store. Search for "Jensen HDMI / MHL Connect" in the search bar.
Note: In order to connect your smartphone, you will need an HDMI / MHL
adapter for your particular brand of smartphone. In some cases, you may
need to connect the additional micro USB port (On the adapter itself) to a
power source in order for the HDMI / MHL adapter to function properly.
Smartphone HDMI / MHL adapters are available at your local mobile phone
retailer. For example, if you have a Samsung S3 / S4 / S5 or Note 2, you would
buy the below HDMI / MHL adapter:
Samsung
ET-H10FAUWESTA Micro USB to HDMI 1080P HDTV Adapter Cable (For
Samsung Galaxy S3 / S4 / S5 and Note 2)
Smartphone brands are usually only compatible with the same brand of HDMI /
MHL adapter.
56
VX4012
Interfacing your Smartphone - iPhone 6® / iPhone 6
Plus® / iPhone 5® / iPhone 5S® / iPhone 5C®
Note: In order to connect your smartphone, you will need the "Apple
Lightning Digital AV adapter" (HDMI adapter). No app or software is
needed for Apple devices.
Apple HDMI adapters are available at your local mobile phone retailer. Apple
devices do not require a BT connection.
Mirror Mode (iPhone Supports Mirror Mode Only)
Mirror Mode allows the image from the smartphone to be displayed on the
larger head unit screen. There is no touch screen control from the head unit
screen. You must control the apps from the smartphone.
Note: All apps may not be supported / displayed when connected via the
Apple Lightning Digital AV adapter.
General
1. Incoming calls or messages may pause media output. Media will resume
after the call or message.
2. Simultaneously running multiple apps on your smartphone while screen
sharing places heavy demand on the smartphone, potentially affecting its
performance. Close unused apps on your smartphone to enhance the screen
sharing feature of the head unit.
3. If you are having trouble seeing your smartphone display on the head unit
screen, try connecting your smartphone (With Apple Lightning AV or HDMI /
MHL adapter) to another device such as a flat panel TV with HDMI input. If you
cannot see the smartphone display on the flat panel TV, the smartphone does
not support HDMI.
57
VX4012
Connecting Your Smartphone - Android / Apple
1. Jensen HDMI / MHL Connect App Installation Procedure
Download and install the Jensen HDMI / MHL Connect app from Google Play
(Android Devices Only) onto your smartphone.
2. Smartphone / Head Unit BT Connection
In order to have full touch screen control (Android Devices Only) from the head
unit screen (via the HDMI / MHL Connect app), a BT connection is required
between your smartphone and head unit. Refer to the head unit / smartphone
documentation for further information on pairing / connecting devices.
3. Connect Your Smartphone (Refer to Wiring Diagram)
Connect your smartphone to the HDMI / MHL adapter. Connect one end of the
HDMI cable to the HDMI / MHL adapter. Connect the remaining end of the HDMI
cable to the Jensen multimedia head unit HDMI input (Rear chassis panel).
Consult your smartphone documentation for instructions on how to access
HDMI / MHL on your device.
4. Touch Screen Calibration Start
Launch the HDMI / MHL Connect app on your smartphone (Android Devices
Only). Using the head unit touch screen, go to Settings in the HDMI/MHL
Connect app. Scroll down and press the Touch Screen Calibration "Start" button.
5. Touch Screen Calibration
Once the touch screen is calibrated (Android Devices Only), scroll up, and press
System Settings to return to the main HDMI / MHL Connect page. Press "Mobile
Home Page" to access your smartphone from the touch screen of the Jensen
multimedia head unit. Touch the "Car Home Page" to return to the Main Source
Menu of the head unit. This calibration is performed once per phone when
initially set-up.
58
VX4012
BT OPERATION
NOTE: The line-of-sight distance between this unit and your mobile phone
must be 8 feet (2.4 meters) or less for sending and receiving voice and data
via BT wireless technology.
Please make sure your mobile phone supports BT. (Headset or Handsfree
profiles or both and A2DP). Adhere to the following guidelines for successful
operation.
• Before using BT functions, you must pair your mobile phone to the
VX4012 unit (see “Pairing the Your Mobile Phone with the Unit”. To ensure
the best reception for pairing and re-connection, please make sure the
mobile phone battery is fully charged before you begin.
• Try to perform pairing within a few minutes of the mobile phone being turned
on.
• Once the unit has been paired with the mobile phone, the unit’s model number,
“VX4012”, will be displayed on the mobile phone.
• To achieve the best performance, always keep the mobile phone within 10 feet
(3 meters) of the unit.
• Always keep a clear path between the mobile phone and the unit. Never place a
metal object or any other obstacle between the mobile phone and the unit.
• Some mobile phones may have a “Power Saving Mode” option. PLEASE DO NOT
use the power saving mode with the VX4012.
• Before accepting or making a call, make sure your mobile phone’s “BT
function” is turned on.
• To ensure the best conversation quality/performance, stay within 3 feet
(1 meter) of the unit’s microphone when talking.
• To manually disconnect the mobile phone from the unit, touch the “Chain Link”
icon on the BT user interface (next to the mobile phone name) and the BT
device will be “disconnected”, but still paired.
59
VX4012
BT User Interface
The on-screen icons and information for BT functions are outlined below.
SRC - Touch this icon to return to the Main Menu Screen.
BT - Displays the current source.
LGVX9200 - Indicates the device that is paired with the unit.
( ) - Indicates whether the unit is connected with a BT device. Touch to
connect to a BT device.
( ) - Touch to disconnect from a BT device.
V4012 Device Name - Provides the name that will appear on the BT device.
Scan - Touch the icon to search for BT devices.
Options - Touch to display the BT Options page.
60
VX4012
The user can make or receive phone calls with BT enabled phones through the
unit. The user can also listen to music from a BT enabled device.
Pairing BT Devices
To connect your BT phone to the unit, the user needs to pair the phone to the unit.
Pairing only needs to be done once per phone. The user can pair up to five (5)
phones. Use your mobile phone to begin the BT pairing process.
1. Touch the MENU on the front panel to access the source menu.
2. Touch the BT icon on the source menu and the BT user interface
screen will appear.
3. Touch the Options icon and the following screen will appear.
4. On the Options submenu set the BT function to ON.
5. On the Options submenu set the Auto Connect function to ON.
6. Set the mobile phone BT discover mode to ON.
Note: Some discovery modes have a time limit, usually one (1) minute,
before they are automatically turned OFF.
7. Touch the “Scan” icon on the unit’s BT user interface screen. Available
devices will appear with the “Pair” icon next to it.
61
VX4012
8. Touch the “Pair” icon on the unit’s BT user interface screen.
9. A prompt to pair or bond should appear on your mobile phone. Accept the
request and initiate the process.
NOTE: Some mobile phones require a “pass key” or pairing code to
connect. If your phone requires a pass key or pairing code, you will
need to enter this number. The default pairing code for the VX4012 is
"5309".
10. A prompt to enter a PIN number or passkey for the unit should appear. The
default passkey for the unit is “5309”.
11. At this point a prompt stating pairing successful should appear. Another
prompt should appear asking connect to the unit, Yes or NO. Touch Yes. The
mobile phone and the unit should connect. The mobile phone should display
a message similar to “Device Connected” and the mobile phone and the unit
are now connected. VX4012 will appear on the mobile phone list of devices.
Managing Incoming Calls
When connected to a BT mobile phone, the unit will mute audio output, pause CD
play, and change to the BTscreen below when a call is received. The incoming
phone number or assigned name for that number will appear on the screen. An
audible tone will sound from the unit and a graphic display will appear on the
front panel.
1.
2.
62
BT Incoming Call Screen
icon: Touch to answer an incoming call.
icon: Touch to end an incoming call.
VX4012
Making an Outgoing Call
Outgoing calls can be performed in two manners. The outgoing call can be direct
dialed using the front panel keypad or the by touching either the Phonebook or
Call History icons, selecting a name and touching the phone number.
Phonebook Synch / Importing Contacts / Call History
1. Select BT function (Handset icon) from the BT Home Menu.
2. Press "Option". Go to > "Phone Synch". Press "Synch" to import the mobile
phone contacts. If you have many contacts, this may take up to 4-5 minutes
initially. Up to 2000 contacts can be imported.
Direct Dialing:
1.
Press the front panel MENU button and then touch the BT icon to access
the BT main menu. The following screen will appear:
BT Direct Dial Screen
2. Use the 0-9, */+, and # icons to input the phone number. If necessary touch the
green arrow icon to clear the last digit or the entire number and start over.
icon to dial the call. The
3. After entering the phone number, touch the
number dialed will be displayed on the screen.
4. To end the call, touch the
icon.
Answering an Incoming Call
To answer an incoming call touch the icon. For best reception, speak loudly and
clearly into the units microphone. To end the conversation, touch the
icon.
Rejecting an Incoming Call
Touch the Transfer to Phone icon to reject an incoming call. The call will revert to
your mobile phone and be left for voice mail.
Volume Control
To increase or decrease the volume level of an incoming call, turn the rotary knob
on the front panel or press the VOL+/ VOL- icons on the remote control.
63
31
VX4012
Audio Mute
To mute the phone call audio from the unit when a call is received, press the front
panel rotary knob. Press the front panel rotary knob again and phone call audio
will be restored to the unit.
Call Log
The call log consists of dialed numbers, received calls and missed calls. Note:
Not all mobile phones allow access to missed, received or dialed calls and
some will not allow uploading of your mobile phone's address book.
BT Call Log Screen
Missed Calls - The Missed Calls List retrieves the list of missed numbers from your
mobile phone if your mobile phone allows the function. The last missed number is
the first number on the list. Touch the Missed Calls menu option to view the list. To
make a call from the Missed Calls list, touch the call’s name. Touch the phone
number and it will be dialed.
Received Calls - The Received Calls list retrieves the received numbers stored on
your mobile phone if your mobile phone allows the function. To access the
Received list, touch the Received Calls menu option. The last received number is
the first number on the list. To make a call from the Received Calls list, touch the
name. A new screen will appear with the name on the top and the phone number
below. Touch the phone number and it will be dialed.
Dialed Calls - The Dialed Calls list retrieves the list of dialed numbers from your
mobile phone if your mobile phone allows the function. The last dialed number is
the first number on the list. Touch the Dialed Calls menu option to view the list. To
make a call from the Dialed Calls list, touch the name. A new screen will appear
with the name on the top and the phone number below. Touch the phone
number and it will be dialed.
64
VX4012
Call Transfer
While talking, to transfer audio from the unit back to the mobile phone, touch the
Transfer to Phone icon. You can only transfer a call after it has been answered.
Touching the Transfer to Radio icon will return the audio from the mobile phone
to the unit. Touch the Transfer Call icon and the following screen will appear:
Transfer to Phone Screen
Transfer to Radio Screen
Call Transfer Screens
BT Music Function
BT provides A2DP (Advanced Audio Distribution Profile) profile for streaming
music from a mobile phone or a portable multimedia player (PMP), sometimes
referred to as a MP3 player. The unit allows you to play back audio files from your
mobile phone using a BT connection.
Note: Please quit A2DP mode before attempting to make a phone call, as
unexpected results may occur depending on your mobile phone model.
The unit can control a BT audio player via AVRCP (Audio/Video Remote Control
Profile). BT audio players compatible with these profiles can be connected to this
unit. The following screen is used for streaming music:
BT Audio Control Screen
65
VX4012
While listening to audio the following functions are available:
1. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume
playback.
2. Previous ( ) icon: Touch to play the previous track.
3. Next ( ) icon: Touch to play the next track.
Functionality varies depending on the profile used:
• A2DP: Stream audio from your BT compatible audio player and listen to
the music through the unit.
• AVRCP: Play back, pause, select songs, etc. while streaming audio from your
BT compatible audio player to the unit.
Note: Song information (e.g. elapsed playing time, song title, song index, etc.)
cannot be displayed on this unit. Since there are a number of BT audio players
available on the market, operations with your BT audio player while using
this unit may vary greatly. Please refer to the instruction manual that came
with your BT audio player.
When there is an incoming call, the song will be paused. After the incoming
call is finished, the screen will return to the music function screen and playback
will continue.
PTT (Push to Talk) Function
The VX4012 has a PTT button to allow you to access Siri or Google Voice through
the head unit when connected via BT. You mobile phone must support Siri or
Google Voice in order for this feature to be supported on the head unit.
NOTE: Samsung "S" Voice and other third-party apps may not be supported.
66
VX4012
REAR CAMERA OPERATION
This unit is “camera ready.” Before accessing any camera features, you must install a
rear video camera.
When the camera is not installed and the function is accessed by the gear selector
being placed in reverse or by the unit’s menu, the message “No Signal!” will be
displayed and the following screen will appear.
Rear Camera Screen
When the camera is installed, the rear view image of what is behind the vehicle will
appear when the vehicle is placed in reverse gear. When leaving reverse gear, the
unit displays the previous screen.
67
VX4012
SWC Ready
The built-in SWC Interface is compatible with PAC steering wheel control
modules. The PAC SWI-RC is recommended.
A third-party adapter must be used in order for the VX4012 to be compatible
with any steering wheel controls.
Note:
Not all OE steering wheel functions may be supported by the VX4012. PTT Will activate Siri / Google Voice if mobile phone supports the feature. Not
compatible with all phones/vehicles.
The following controls are available for most vehicles:
1. Volume
Up (+)
4. Preset (+)
7. Seek /
Track +
10. BT Send
2. Volume
Down (-)
5. Preset (-)
8. Seek /
Track -
11. BT End
3. Mute
6. Source
9. Band
12. PTT
PAC SWI-RC Installation Hints
1.. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Other/Sony".
2.. Programming - Use the Pioneer/Sony/Other radio function mapping order for
Jensen branded head units.
3.. When programming the SWI-RC, if a function is not supported (or not desired),
then the function MUST be skipped as per the PAC SWI-RC instructions.
4.. The SWC function MUST be programmed in the correct order per the PAC
SWI-RC radio function mapping order instructions.
36
68
VX4012
PANDORA® RADIO OPERATION
Pandora Radio is available on your iPhone® / iPod® touch via USB cable or an
Android™ device via BT. Data usage may occur.
Note: Pandora is available in the United States, Australia and New
Zealand.
Note: The Pandora Radio app must be installed on your iPhone®/iPod®
touch or Android device. For iPod®/ iPhone® connectivity, you can use the
cable that comes with your Apple device for audio connectivity. To play
Pandora Radio using an Android device, it is necessary to pair your mobile
phone via BT to the VX4012. A cable connection for Pandora via Android
is not supported.
Pandora Radio
The on-screen indicators and touch key areas for Pandora Radio functions are
outlined below.
Pandora Radio User Interface Screen
SRC Icon - Touch this icon to return to the Main Menu Screen.
Pandora - Displays the current source.
Time Display - This indicator displays the time as entered by the user in the
Settings Menu.
Pandora Radio Information Display - Displays the Pandora station, artist, song,
and album information.
Elapsed Time Indicator - Displays the elapsed and total playing time of the
current track playing.
Pandora Preview Window - Displays album art, if available.
More  - Touch to display the bookmark sub-menu.
69
VX4012
(
) Pause / Play Icon - Touch the icon to pause playback. Touch the
begin playback.
(
icon to
) Next Icon - Press this icon skip a song, subject to the skip limit.
(
) Thumbs Up - Press thumbs up to tell Pandora you like the track currently
playing, and Pandora will play more tracks like it.
) Thumbs Down - Press thumbs down to tell Pandora not to play this track.
(
Pandora will skip to the next track. If the skip limit has been reached, Pandora will
continue to play but your feedback will be recorded.
Station List icon - Press this icon to access the Station List Screen.
Bookmark Sub-Menu
Pandora Bookmark Sub-Menu
Touch the Bookmark Track icon to bookmark a track.
Touch the Bookmark Artist icon to bookmark an artist.
Touch the More q icon to return to the Pandora Radio user interface screen.
70
VX4012
Station List Screen
The Station List Screen allows you to search for music by stations you created.
Pandora® Radio Station List Screen
Touch a station on the list to choose that station.
Touch the Scroll Down (q) icon to view the next page in the list or the
Scroll Up (p) icon to view the previous page.
Touch the Return to Now Playing icon to return to the Pandora Radio user
interface screen.
To Launch/Stop Pandora Radio
1. Launch the Pandora app on the iPhone®, iPod® or Android device.
2. T ouch the Pandora icon on the main menu screen. If only one device is
connected to the radio, the Pandora Radio user interface screen appears.
Pandora Radio User Interface Screen
71
VX4012
3. I f both an Android device and iPhone®/ iPod® are connected to the radio, the
Select Android or iOS Screen appears.
Select Android or iOS Screen
4. To stop Pandora,® exit the Pandora app on the iPhone®, iPod® or
Android device.
Pandora Error Messages
Message Displayed
Cause
Corrective Action
BookMark Track Error
Software Error
The track could not be
bookmarked, please try
again in a moment.
BookMark Artist Error
Software Error
The song could not be
bookmarked, please try
again in a moment.
Thumbs Up / Down Error
“Error Track Rating”
Software Error
Song feedback could not
be sent, please try again
in a moment.
No Active Station Error
Software Error
This account has no
stations in it. Please visit
Pandora.com and login
to your account and add
stations.
Skip Limit Reached
Software Error
Please note that
Pandora limits skips to a
maximum of six skips per
station, per hour.
72
VX4012
SiriusXM® RADIO OPERATION
Only SiriusXM® brings you more of what you love to listen to, all in one place.
Get over 140 channels, including commercial-free music plus the best sports,
news, talk, comedy and entertainment. Welcome to the world of satellite radio. A
SiriusXM Vehicle Tuner and Subscription are required. For more information, visit
www.siriusxm.com.
Activating SiriusXM® Radio
After installing your SiriusXM Connect Vehicle Tuner and antenna, power on your
radio and select SiriusXM mode. You should be able to hear the SiriusXM preview
channel on Channel 1.
After you can hear the Preview channel, tune to Channel 0 to find the radio ID of
your tuner.
Note: The SiriusXM Radio ID does not include the letters I, O, S or F.
In the USA, you can activate online or by calling SiriusXM Listener care:
• Visit www.siriusxm.com/activatenow
• Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activatexm
• Call XM customer Care at 1-877-438-9677
Activation typically takes 10-15 minutes, but may take up to one hour. It is
recommended to leave your vehicle on until the “Subscription Updated”
message appears.
This Jensen unit is compatible with the following SXM Vehicle Connect Tuners:
- SXV200
- SXV300
73
VX4012
SiriusXM® User Interface
The on-screen indicators and touch key areas for SiriusXM® functions are outlined
below.
Menu
Page 1
SiriusXM® Menu Page 1
SRC Icon - Touch to return to the unit’s Main Menu Screen.
Band indicator (SXM1 icon) - Displays SiriusXM® radio band currently selected.
Three bands are available: SXM1, SXM2, and SXM3.
Time Display - This indicator displays the time as entered by the user in the
Settings Menu.
Signal Strength Indicator
- As the strength of the satellite radio signal
increases, the number of illuminated segments will increase.
Program Information:
Channel Number - Channel numbers are used to designate the channel along with
the channel name and are useful for identifying/loading a channel via the “direct
entry” method.
Channel Name - The channel name is used to identify the channel and is usually
related to that channel’s musical content.
Category Name - A category may contain one or more channels grouped by their
similar content into a “Category”.
Artist Name - This area displays the name of the artist currently playing.
Song - This area displays the name of the song currently playing.
Info - This area contains additional information related to the song/track now
playing.
More Icon - Touch to go to SiriusXM® Menu Page 2.
Direct Entry Icon - Touch to display the Direct Entry Menu.
74
VX4012
Previous (
) Icon - Touch to tune to the previous channel.
Channel/Category Icon - Touch to toggle the icon displayed between Category
and Channel. When Channel is displayed, touching
or
tunes channels up
or
tunes channels within a
or down. When Category is displayed, touching
category up or down.
Next (
) Icon - Touch to tune to the next channel.
List Icon - Touch to select a channel search criteria. Presets lists preset channels
stored by the user. Channels lists all SXM channels. Category lists SXM channels by
categories.
75
VX4012
Menu
Page 2
SiriusXM® Menu Page 2
More Icon - Touch to go to SiriusXM® Menu Page 1.
Band Icon - Touch to select a band of preset channels. Three bands are available:
SXM1, SXM2, and SXM3. Each band can store up to ten preset channels. (Preset
channels are accessed from the List icon.)
Mem Icon - Touch to display screen used to enter current channel into preset
memory.
Scan Icon - Touch to scan all channels starting at channel 1. The tuner will pause
for approximately five seconds at that channel. Touch scan again to listen to that
channel. If scan is not touched, the tuner will automatically seek the next channel.
Lock Icon - Touch to display the SXM Lock Screen.
CHG PWD Icon - Touch to go to the change password screen.
EQ Icon - Touch to access the Equalizer level settings menu.
76
VX4012
Switching to SiriusXM® Radio
• Touch the top left corner of the screen (the SRC box) to view the Main Menu
screen. From the Main menu screen, touch the SiriusXM icon.
• Press the MENU button on the front panel to switch to the SXM source.
Selecting the SiriusXM® Band
Touch the Band icon on the SXM Menu screen to change between the following
bands: SXM1, SXM2, and SXM3.
Seek Tuning
• To fast seek the next higher channel, touch and hold the
• To fast seek the next lower channel, touch and hold the
icon.
icon.
Direct Tuning
To enter a SiriusXM® radio channel directly:
1. On the SiriusXM® menu page 1, touch the Direct Entry icon to display the
Direct Entry Menu.
SXM Direct Entry Screen
2. E nter the desired SiriusXM® radio channel using the on-screen number pad
then touch the Ok icon. If you wish to delete an entry number touch the X
icon.
3. To exit the screen without changing the channel, touch the Back icon.
77
VX4012
Using Preset Channels
A preset is a channel name that is stored for instant access to that channel. Ten
numbered preset buttons store and recall channels for each band.
Storing a Channel
1. Select a band (if needed), then select a channel.
2. O
n the SiriusXM® menu page 2, touch the Mem icon to access the Preset
Channel Screen.
SXM Preset Channel Screen
3. T ouch the preset number (P1 through P10) in which you would like to store
the current channel (or touch the Back icon to cancel and close the menu).
The channel will be stored and displayed in that preset. Touch the or icon
to scroll up or down the list.
4. Touch the Back icon to return to the SXM Menu screen.
Recalling a Channel
1. Touch the List icon.
2. T ouch the Preset icon to access the Recall Preset Channel Screen.
Recall Preset Channel Screen
3. T ouch a channel on the preset channel list to select the corresponding stored
channel. Touch the or icon to scroll up or down the list.
78
VX4012
Searching for a Channel
Search by Channel
To search by channel:
1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed)
to select Channel.
2. Touch List to display the Channel Search Screen:
Channel Search Screen
3. T ouch a channel to tune to that channel. Touch the or icon to scroll up or
down the list.
Search by Category
Categories group music by type such as jazz, rock, classical, etc. To search by
category:
1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed)
to select Category.
2. Touch List to display the Category Search Screen:
Category Search Screen
3. Touch a category item. A channel list screen appears.
4. Touch a channel to tune to that channel. Touch the or icon to scroll up or
down the list.
79
VX4012
Locking SXM Mature Channels
SiriusXM® attaches a label to channels with mature content. The radio recognizes
these channels as “Mature”. The Mature Channel Lock option allows you to lock
out channels with “Mature” labels. These channels will still appear in the channel
listing (with a lock icon), but will not be tunable unless the parental lockout
password is correctly entered.
Lock Mature Channels
To lock mature channels:
1. On the SirusXM® menu page 2, touch the Lock icon. The following screen
appears:
Enter Lock Password Screen
2. E nter your 4-digit password and then press the OK icon. The following screen
appears:
Lock Screen
3. Touch the Lock Mature icon. The mature channels are now locked.
80
VX4012
Temporarily Unlock a Mature Channel
When the global “Mature Lock” is enabled, a mature channel can be temporarily
unlocked. All mature channels are temporarily unlocked (but still hidden when
channel browsing) until the SXM source is changed, Accy (Key) is cycled or the
“Power Button” on front panel of radio turns the Radio off.
This mode is useful for listening to mature/adult content on a temporary basis,
allowing you to listen on a locked channel without having to disable the global
“Mature Lock.”
To temporarily unlock a mature channel:
1. Tune to a mature channel. If the channel is locked, Ch Locked, Code? will
appear on the SiriusXM® User Interface tuner screen.
Channel Locked Screen
2. E nter the 4-digit password and then press the OK icon to unlock the channel
to tune it.
81
VX4012
Unlock All Mature Channels
To unlock all mature channels:
1. On the SirusXM® menu page 2, touch the Lock icon. The following screen
appears:
Enter Lock Password Screen
2. E nter your 4-digit password and then press the Ok icon. The following screen
appears:
3. Touch the Unlock All icon. All channels are now unlocked.
82
VX4012
Locking Individual SXM Channels
An user can lock individual channels. When locked, a channel has the lock (
icon next to it on the channel list.
)
Locking a Channel
To lock an individual channel:
1. On the SirusXM® menu page 2, touch the Lock icon. The following screen
appears:
Enter Lock Password Screen
2. E nter your 4-digit password and then press the OK icon. The following screen
appears:
Lock Screen
3. T ouch an unlocked (
) icon. The icon is replaced by a lock (
channel is now locked.
) icon. The
83
VX4012
Unlocking a Channel
To unlock an individual channel:
1. On the SirusXM® menu page 2, touch the Lock icon. The Enter Password
Screen appears appears.
2. Enter your 4-digit password. The following screen appears:
3. Touch a lock (
unlocked (
Unlock Screen
) icon to unlock a channel. The icon is replaced by an
) icon. The channel is now locked.
Change Lock Password
The Change Lock Password option allows you to change the password from the
default or current custom password to another password.
NOTE: The default password is 0, 0, 0, 0.
To change a password:
1. Touch the CHGPWD icon. The following screen appears:
Change Password Screen
2. Enter your 4-digit password and press the OK icon.
3. Enter the new 4-digit password and press the OK icon. The new password is
set.
84
VX4012
SiriusXM® Radio Advisory Messages
SiriusXM® user advisory messages are listed below:
Advisory Displayed
Cause
Check SXM Tuner
Check the SiriusXM® tuner connection on the back of
the unit to ensure that it’s correctly connected.
Check SXM Antenna
Ensure the SiriusXM® antenna cable is connected to
the SiriusXM® tuner correctly.
Check the SiriusXM® antenna wire for breaks or sharp
bends.
Replace the antenna if necessary. If the message
remains, the antenna may have been damaged.
No SXM Signal
The vehicle must be outside, and the antenna must
have a clear view of the southern sky. The magnetic
antenna must be mounted on the outside of the
vehicle for the best reception.
Channel Not Subscribed
This channel is not included in your SiriusXM®
subscription plan. Call 1-866-635-2349 to subscribe.
Channel Not Available
This channel is not a valid SiriusXM® channel. The
channel number has been entered incorrectly, or the
channel was removed from the SiriusXM® channel
lineup.
Channel Locked
The selected channel has been locked by the
parental controls, or a mature channel has been
selected. A prompt to enter the unlock code will
appear. Enter the unlock code.
85
VX4012
User Up-Loadable Wallpaper
In addition to the 5 selectable wallpaper selections, you can up load your own
wallpaper image to the VX4012.
Note: The wallpaper image must have a .bmp file extension and the size /
resolution must be 800 x 480, 24 or 32 bit. Other file sizes / resolutions
will result in the image being enlarged or reduced and may appear
distorted.
Uploading User Wallpaper
Only one user wallpaper can be loaded at a time into the VX4012. However, the
user wallpaper can be loaded an infinite amount of times.
1. Insert a MicroSD card with wallpaper images into the MicroSd card slot.
2. Go to Settings > General > Wallpaper > Custom.
3. Select a wallpaper image and press "OK" to load the new wallpaper image.
4. Remove MicroSD card.
86
VX4012
TROUBLESHOOTING
Troubleshooting
Problem
Cause
Corrective Action
Radio Fuse open
Install new fuse with
correct rating
Car battery fuse open
Install new fuse with
correct rating
Illegal operation
Press the RESET button
located in the middle
of the left side of the
front panel
Improper audio output
connection
Check wiring and
correct
Volume set too low
Increase volume level
Improper “MUTE” connection
Review wiring diagram
and check “MUTE”
connection
Speakers damaged
Replace speakers
Heavily biased volume balance
Adjust the channel
balance to the center
position
GENERAL
Unit will not power
on
No/low audio
output
Speaker wiring is in contact with Insulate all speaker
metal part of car
wiring connections
Poor sound quality
or distortion
Unit resets itself
when engine is off
Pirated disc is in use
Use original copy
Speaker power rating not
compatible with unit
Connect proper
speakers
Speaker is shorted
Check speaker contact
Incorrect connection between
ACC and positive battery wire
Check wiring and
correct
87
VX4012
Problem
Cause
Corrective Action
Incorrect connection to parking
brake wire
Check wiring and
correct
Parking brake is not engage
Stop vehicle in safe
place and apply
parking brake
DVD is not compatible with
current TV system settings
Change setup to
accommodate disc
Improper video signal
connections
Check wiring and
correct
Improper aspect ratio setup
Use correct aspect
ratio setting
Auto antenna is not fully
extended
Extend antenna fully
or connect the auto
antenna control cable
properly
Auto antenna not properly
connected
Connect the auto
antenna control cable
properly
LOCAL function is activated
Turn LOCAL function
off
Cannot insert disc
Disc already inside unit
Eject current disc and
insert new one
Image blurred,
distorted or dark
Disc is illegally copied
Use original disc
TFT Monitor
No image
Flashing image
or interference
appears on screen
Prolonged image or
improper height/
width ratio display
TUNER
Weak station
searching
DISC
88
VX4012
Problem
Cause
Corrective Action
Disc does not play
back
Disc is warped or scratched
Use disc in good
condition
Disc is dirty or wet
Laser pickup is dirty
Clean disc with soft
cloth
Clean laser pickup with
cleaning disc
Incompatible disc is used
Use compatible disc
Disc rating exceeds Parental
Lock rating limit
Change Parental Lock
settings to lower
restriction
Disc region code is not
compatible with unit
Use disc with proper
region code
Disc is inserted upside down
Insert disc with label
side up
Disc is dirty or scratched
Clean disc or replace
File is damaged/bad recording
Recreate disc with
good file
MP3
Interruption
occurred during
playback
89
VX4012
Disc Error Messages
Message Displayed
Cause
Loading
Disc is being read
No Disc
Disc is dirty
Clean disc with soft cloth
Disc is upside down
Insert disc with label side
up
Disc not present in
loading compartment
Insert disc
Disc is dirty
Clean disc with soft cloth
Disc is upside down
Insert disc with label side
up
Bad Disc
Unknown disc
Disc format is not
compatible with this unit
Region Error
DVD is not compatible
with region code of unit
Error
Illegal mechanism
operation
90
Corrective Action
Press EJECT button for 5
seconds to reset loading
mechanism
VX4012
CARE AND MAINTENANCE
1.
2.
3.
4.
5.
6.
7.
8.
se only a clean silicone cloth and neutral detergent to clean the front panel
U
or monitor. A rough cloth and non-neutral detergent (such as alcohol) may
result in scratching or discoloration.
Do not get water or cleaning fluids on the unit.
If the temperature inside the player gets too hot, a protective circuit
automatically stops play of the disc. If this occurs, allow the unit to cool before
operating the player again.
Never insert anything other than a 12 cm (5”) compact disc into the player as
the mechanism can be damaged by foreign objects.
Do not attempt to use a 8 cm (3”) CD-Single disc in this unit, either with or
without an adaptor, as damage to the player and/or disc may occur. Such
damage is not covered by the Warranty on this product.
The CD player may not operate properly in extreme hot or cold. If such
conditions occur, allow the interior of the vehicle to reach a normal
temperature before using player.
When the vehicle warms up during cold weather or under damp conditions,
condensation may appear on the LCD panel. Should this occur, the screen will
not operate properly until the moisture has evaporated.
We suggest you use a cleaning disc in this unit more frequently than in the
unit in your home due to the environmental conditions of the vehicle.
91
VX4012
SPECIFICATIONS
DVD/CD Player
Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW
Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2
and AAC
Signal to Noise Ratio: >95dBA
Dynamic Range: >95dB
Frequency Response: 20Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 kHz
D/A Converter: High Performance Multi-Bit Sigma-Delta Modulator
Video
Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm)
Input: 1Vp-p (75-ohm)
FM Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity (-30dB): 9dBf
Quieting Sensitivity (-50dB): 15dBf
Alternate Channel Selectivity: 70dB
Signal to Noise Ratio @ 1 kHz: 58dB
Image Rejection: 80dB
Stereo Separation @ 1 kHz: >30dB
Frequency Response: 30Hz - 15 kHz, -3db
AM Tuner
Tuning Range: 530 kHz - 1720 kHz
Sensitivity (-20dB): 15uV
Signal to Noise Ratio @ 1 kHz: 50dB
Image Rejection: 60dB
Frequency Response: 50Hz - 2 kHz, -3dB
Monitor
Screen Size: 7” (Measured diagonally), 16:9 Widescreen
Screen Type: TFT LCD
Resolution: 800h x 480v x RGB WVGA
92
VX4012
General
Auxiliary (Audio) Input Impedance: 10k -Ohm
Power Supply: 11 to 16VDC, negative ground
Power Antenna / Amp Remote (Blue): 500mA max (Current limited protection)
Operating Temperature: 0C ~ 65C / 32F ~ 149F
Fuse: 15-Amp, ATO type
Chassis Dimensions: 7” X 7” X 2” (178mm x 178mm x 50mm)
CEA Power Ratings
Power Output: 13 Watts RMS x 4 channels into
4-Ohms @ < 1% THD+N
Signal to Noise Ratio: 70dBA below reference
(Reference: 1 Watt, 4-Ohms)
Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux
Input used as reference input)
Reference Supply Voltage: 14.4VDC
*Specifications are subject to change without notice.
93
VX4012
NOTES:
94
VX4012
Voxx Electronics Corporation
Hauppauge, NY 11788
Technical Assistance: 800-323-4815
www�jensenmobile�com
© 2015
Printed in China
VX4012 Common Replacement Parts
Wire Harness (Pwr / Spk / Line Out / BT Mic / SWC Adapter)
30314250
Trim Ring
30413940
Remote Control
30714230
Hardware Bag
30513940
33914230
HDMI Right Angle Adapter
Operation manuals and other material online at: www.jensenmobile.com
Download PDF
Similar pages
Trust Wall Charger with Micro USB cable
Trust Dual Smartphone Wall Charger
Trust Dual Smartphone Wall Charger
Trust Ricaro
Trust BridZ 4 Port USB 2.0 Hub
hi-Fun hi-Head
Trust Dual Charger