6000 series fingerprint lock user manual technical

6000 SERIES FINGERPRINT LOCK USER MANUAL
TECHNICAL SPECIFICATION
Working voltage: 6V DC
Low voltage warning: 5.1V
Dynamic consumption: <200 mA
Static consumption: <10 uA
Working temperature: -15C°~55C°
Working humidity: 0%~99%
User capacity:
50 users ( can 120 users customizable )
Access mode:
Password digital:
3
10 digital
OPERATION INDEX
1. Keypad function
a)
b)
c)
d)
“0”— run to work
“1” — register
“2” — delete
“3” — modify
2. Operation diagram
(Remarks: press_: press last for several seconds; PSD: password; F: fingerprint)
OPERATION INSTRUCTION
1. Initialization
1)
2)
3)
Press 【0】、【3】 at same time last for 3seconds.
When hear beeps with blue light flash, press deadbolt button last for 3seconds.
Hear one beep and release deadbolt button. Then hear one short and long beep means
initialization successfully.
2. Register fingerprint/password
2.1 Register master fingerprint
1)
2)
Press【1】last for 3seconds.
Hear long and short beep press the master password(the original password is
1111111111(10pcs of 1)) or place the master fingerprint.
3) Verify master password/fingerprint succeed with one beep along with green light flash.
4) When blue light flash press 【1】, hear one beep, place the fingerprint. Later one long beep
means first time register fingerprint successfully then remove fingerprint.
5) One beep, place the same fingerprint again. Hear one short and long beep means register
master fingerprint successfully.
6) In steps, if 4 short beeps means fail, please try again.
When you have been registered the master fingerprint, the original password (1111111111) is will lose
efficacy at the same time.
2.2 Register user fingerprint
1)
2)
3)
4)
5)
6)
Press【1】last for 3seconds.
Hear long and short beep press the master password or place the master fingerprint.
Verify master password/fingerprint succeed with one beep along with blue light flash.
When blue light flash press【2】, hear one beep, place the fingerprint. Later one long beep
means first time register fingerprint successfully then remove fingerprint
One beep, place the same fingerprint again. Hear one short and long beep means register
master fingerprint successfully.
In steps, if 4 short beeps means fail, please try again.
Tips:
Must register master fingerprint first then register user fingerprint. If register user fingerprint
in advance the operation will fail.
2.3 Register ID fingerprint
1)
2)
3)
4)
5)
6)
Press【1】last for 3seconds.
After one long and short beep release keypad and press master password or place the master
fingerprint.
Verify master password/fingerprint succeed with one beep along with blue light flash.
When blue light flash press【3】, press 4 digital ID code. When long beep along with blue light
flash, place fingerprint, after twos beeps then remove.
One beep along with green light flash, place the same fingerprint again. Hear one long beep
means register ID fingerprint successfully.
In steps, if 3 short beeps means fail, please repeat steps 4 and 5 again.
Tips:
1. ID code please refer ID code attachment.
2. If the ID has registered, the operation will fail, please change another ID or delete this ID first
then register again.
2.4 Register master password
1)
2)
3)
4)
Press【1】last for 3seconds
Hear one long and short beep press the master password or place the master fingerprint.
Verify master password/fingerprint succeed with one beep along with blue light flash.
When blue light flash press【1】, hear one long beep and press 10 digital password.
2.5 Register user password
1)
2)
3)
4)
Press【2】last for 3seconds.
Hear one long and short beep press the master password or place the master fingerprint.
Verify master password/fingerprint succeed with one beep along with blue light flash.
When blue light flash press【2】, hear one long beep and press 10 digital password.
2.6 Register ID password
1)
2)
3)
4)
5)
6)
Press 【2】 and【1】last for 3seconds.
After one long beep release keypad and press master password/fingerprint.
Verify master password/fingerprint succeed with one beep along with blue light flash. When
blue light flash press【3】 and 4 digital ID code.
One long beep, press 10 digital password.
One long beep means register ID password successfully.
In steps, if 3 short beeps means fail, please try again.
Tips:
1. ID code please refer ID code attachment.
2. If the ID has registered, the operation will fail, please change another ID or delete this ID first
then register again.
3. Delete information
3.1 Delete one master
1)
Press 【2】last for 3seconds.
2)
3)
4)
5)
Hear one long and three short beeps release keypad and press the master password or place
master fingerprint.
Verify master password/fingerprint succeed with one beep along with green light flash.
When the green light flash press 【1】, then press the master password/fingerprint you want to
delete.
Hear one short and long beep means delete this master successfully.
Tips:
After delete the master, when green light flash, can delete other master without step1 and step2 but
start from step 4 directly.
3.2 Delete one user
1)
2)
3)
4)
5)
Press 【2】last for 3seconds.
Hear one long and 3 short beeps release keypad and press the master password or place
master fingerprint.
Verify master password/fingerprint succeed with one beep along with green light flash.
When the green light flash press 【2】, then press the user password/fingerprint you want to
delete.
Hear one short and long beep means delete this user successfully.
Tips:
After delete the master, when green light flash, can delete other user without step1 and step2 but start
from step 4 directly.
3.3 Delete one ID
1)
2)
3)
4)
5)
Press 【2】last for 3seconds.
Hear one long beep and 3 short beeps, press the master password or place master fingerprint.
Verify master password/fingerprint succeed with one beep along with green light flash.
When the green light flash press【3】, then press ID code.
Hear one short and long beep means delete this ID successfully.
Tips:
After delete the master, when green light flash, can delete other ID without step1 and step2 but start
from step 4 directly.
3.4 Delete all master
1)
2)
Press 【2】last for 3seconds.
Hear one long beep and 3 short beeps, release keypad and press the master password or place
master fingerprint.
3)
4)
5)
6)
Verify master password/fingerprint succeed with one beep along with blue light flash.
When the blue light flash press【0】, then 【1】.
Hear up and down alternative short beep, press master password or place fingerprint again.
Hear one short and long beep means delete all master successfully.
3.5 Delete all user
1)
2)
3)
4)
5)
6)
Press 【2】last for 3seconds.
Hear one long beep and 3 short beeps, release keypad and press the master password or place
master fingerprint.
Verify master password/fingerprint succeed with one beep along with green light flash.
When the green light flash press【0】, then【2】.
Hear up and down alternative short beep, press master password or place fingerprint again.
Hear one short and long beep means delete all user successfully.
3.6 Delete all ID
1)
2)
3)
4)
5)
6)
Press 【2】last for 3seconds.
Hear one long beep and 3 short beeps, release keypad and press the master password or place
master fingerprint.
Verify master password/fingerprint succeed with one beep along with green light flash.
When the green light flash press【0】, then【3】.
Hear up and down alternative short beep, press master password or place fingerprint again.
Hear one short and long beep means delete all ID successfully.
4. Modify information
4.1 Modify master fingerprint
1)
Press 【3】last for 3seconds. Hear one beep and green light flash, press【1】, then place master
2)
3)
fingerprint.
Verify master fingerprint succeed with one beep. Place new fingerprint, hear one long beep
then remove.
Hear one beep and green light flash then place same new fingerprint again, verify it and show
modify master fingerprint successfully.
4.2 Modify user fingerprint
1)
2)
3)
Press 【3】last for 3seconds. Hear one beep and green light flash, press【2】, then place user
fingerprint.
Verify user fingerprint succeed with one beep. Place new fingerprint, hear one long beep then
remove.
Hear one beep and green light flash then place same new fingerprint again, verify it and show
modify user fingerprint successfully.
4.3 Modify ID fingerprint
1)
2)
3)
4)
Press 【3】last for 3seconds. Hear one beep and green light flash, press【3】, then press ID
code.
Place the fingerprint you want to modify.
Verify user fingerprint succeed with one beep. Place new fingerprint, hear one long beep then
remove.
Hear one beep and green light flash then place same new fingerprint again, verify it and show
modify ID fingerprint successfully.
4.4 Modify master password
1)
2)
3)
4)
Press 【3】last for 3seconds. Hear one beep and green light flash, press【1】, then press old
master password.
Verify old password succeed with one beep. Then press 10digital new password.
Hear one beep, press same 10digital new password again.
One long beep to verify modify password successfully.
Tips:
1. If insert wrong number when press password , can press【1】 last for 3seconds to delete
the password what you have pressed.
2. If two times new password different can not modify the old password.
4.5 Modify user password
1)
2)
3)
Press 【3】last for 3seconds. Hear one beep and green light flash, press【2】, then press old
password.
Verify old password succeed with one beep. Then press 10digital new password.
Hear one beep, press same 10digital new password again.
4)
One long beep to verify modify password successfully.
Tips:
1. Search default password automatically, find the same password and modify it. Each time can
modify one group.
2. Press wrong password should wait seconds, when LED light stop then continues. Also can press
【3】last for 3seconds then can modify password again.
3. Two times new password must be same.
4.6 Modify ID password
1)
2)
3)
4)
Press 【3】last for 3seconds. Hear one beep and green light flash, press【3】,then press 3digital
ID code and old password.
Verify old password succeed with one beep. Then press 10digital new password.
Hear one beep, press same 10digital new password again.
One long beep to verify modify password successfully.
Tips:
1. Search default password automatically, find the same password and modify it. Each time can
modify one group.
2. Press wrong password should wait seconds, when LED light stop then continues. Also can press
【3】last for 3seconds then can modify password again.
3. Two times new password must be same.
5. Access mode
5.1 Unlock by fingerprint access mode
1)
2)
3)
Place registered fingerprint on the screen.
Green light flash, verify fingerprint to gain permission, succeed with one beep.
Turn handle then push door.
Tips:
If without LED flash after place fingerprint please press 【0】. After green light flash then place
fingerprint and continues.
5.2 Unlock by password access mode
1)
Press 10digital registered password
2)
After one beep, turn handle then push door.
Tips:
1. Password must 10 digital.
2. Press wrong password should wait seconds, when LED light stop then continues. Also can press
【1】last for 3seconds then press password again.
3. If press wrong password 6times continuously, the lock refuse to work for 3 minutes.
5.3 Always unlocked access mode
1)
2)
Unlock by fingerprint or password.
After one beep, press【0】last more then 3seconds, hear two beeps and green light flash then
release keypad.
5.4 Release always unlocked access mode
Unlock the door normally, without press 【0】, 3seconds later will lock automatically.
5.5 Deadbolt
Press the deadbolt button on back panel, red light flash more than 10times means the lock be
deadbolt.
5.6 Release deadbolt
1) When it deadbolt, press the deadbolt button, blue light flash 6times means release deadbolt.
2) Turn down handle, blue light flash 6times means release deadbolt.
3) Press 【0】last for 3seconds.
5.7 Lock the door
Press 【0】 and 【1】 last for 3seconds.
ID CODE
This model use 4digital ID code. If 120 users for customizable, we assume as 1~120, so the ID code as
below.
User No
ID Code
User No
ID Code
User No
ID Code
User No
ID Code
1
0000
31
0132
61
0330
91
1122
2
0001
32
0133
62
0331
92
1123
3
0002
33
0200
63
0332
93
1130
4
0003
34
0201
64
0333
94
1131
5
0010
35
0202
65
1000
95
1132
6
0011
36
0203
66
1001
96
1133
7
0012
37
0210
67
1002
97
1200
8
0013
38
0211
68
1003
98
1201
9
0020
39
0212
69
1010
99
1202
10
0021
40
0213
70
1011
100
1203
11
0022
41
0220
71
1012
101
1210
12
0023
42
0221
72
1013
102
1211
13
0030
43
0222
73
1020
103
1212
14
0031
44
0223
74
1021
104
1213
15
0032
45
0230
75
1022
105
1220
16
0033
46
0231
76
1023
106
1221
17
0100
47
0232
77
1030
107
1222
18
0101
48
0233
78
1031
108
1223
19
0102
49
0300
79
1032
109
1230
20
0103
50
0301
80
1033
110
1231
21
0110
51
0302
81
1100
111
1232
22
0111
52
0303
82
1101
112
1233
23
0112
53
0310
83
1102
113
1300
24
0113
54
0311
84
1103
114
1301
25
0120
55
0312
85
1110
115
1302
26
0121
56
0313
86
1111
116
1303
27
0122
57
0320
87
1112
117
1310
28
0123
58
0321
88
1113
118
1311
29
0130
59
0322
89
1120
119
1312
30
0131
60
0323
90
1121
120
1313