Citroën BERLINGO 01/01/2010 - 31/12/2010 Owner Manual


Add to my manuals
2 Pages

advertisement

Citroën BERLINGO 01/01/2010 - 31/12/2010 Owner Manual | Manualzz

RDS

Using the RDS (Radio Data

System) function on FM

Radio Data System allows you to continue listening to the same station, whatever frequency it is using for the region you are going through.

Briefl y press the "RDS" function on or off.

The multi-function display will show:

- "RDS" if the function is selected.

- "(RDS)" if the function is selected but not available.

Traffi c information programme

Press the "TA" button to switch the function on or off.

The multi-function display will show:

- "TA" if the function is selected,

- "(TA)" if the function is selected but not available.

Any traffi c information fl ash will be given priority, whatever source you are listening to (radio, cassette, CD or CD changer).

If you wish to interrupt a message, press the button; this switches the function off.

RDS station following

The display indicates the name of the station selected. The radio is continually searching for the station which has the best reception and which is transmitting the same programme.

Note: the volume of traffi c information announcements is independent of the volume of normal radio listening. You can adjust it using the volume button. The setting will be stored and will be used when the next messages are broadcast.

AUDIO 31

Regional following mode (REG)

When they are part of a network, certain stations broadcast regional programmes in the various areas they serve. With regional following mode you can keep listening to the same programme.

Press the "RDS" button for more than two seconds to switch the function on or off.

REG

32 AUDIO

PTY function

This allows you to listen to stations broadcasting a specifi c type of programme

(news, culture, sport, rock, etc.).

With FM selected, press the "TA" button for more than two seconds to switch this function on or off.

To search for a PTY programme:

- select the PTY function,

- briefl y press button L or N to scroll down the list of the various types of programmes offered.

- when the programme of your choice is displayed, keep button L or N pressed for more than two seconds to carry out an automatic search (after an automatic search the PTY function is switched off).

In mode the different types of programmes can be stored in the memory. To do this, press the preselection buttons "1" to "6" for more than two seconds. Briefl y press the corresponding button to recall the type of programme stored in the memory.

EON system

This connects stations which are part of the same network. It enables the broadcast of traffi c information, by a station that is part of the same network as the station to which you are listening.

This service is available when you have selected the traffi c information programme or the PTY function.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement