NEW!
OceanLED Marine
Amphibian Xtreme Series
Amphibious
A4
Amphibian A4 Xtreme
20
14
Underwater & Above Water Lighting Excellence
New Amphibian Xtreme LED lights are extremely bright, more than 3 1/2 times
the brightness of the previous Amphibians T-Series equivalents, and are the ideal
choice for your boat and trailer to attract fish and bait, light up your wake, and
create incredible nighttime lighting effects above and below water.
Exceptionally easy to install and may be used underwater on the transom, hull, or
above water on your T-top, engine brackets or cowling, under your gunnels, as a
mast up-lighter, in your engine compartment, and even on your trailer or tailgate
for night launching.
Maintenance is easy due to its Tritonium™ coating (available on all OceanLED
lights); just wipe away marine growth.
•1/2” Hole in Hull
•Equal to 80w Halogen
•12/24V DC
•40,000+ Hour Life
•Chemically Resistant Polymer
•Twin Core Wire
•Factory Sealed Unit
•No Breakable Parts
Built-in driver, ultra low power draw, no start-up current required, reverse polarity
protection. Suitable for all types of hulls.
Amphibian Xtreme lights are designed for underwater or above water use on boats. Not intended for use as Dock
Lighting; please see our Dock Light Series.
Quick Specs
40K
HOURS
LIFE
SPAN
12V DC
24V DC
ABOVE
700
FIXTURE
LUMENS
WATER
60°
BEAM
Description
Amphibian A4 Xtreme Ultra White LEDs
Amphibian A4 Xtreme Midnight Blue LEDs
Amphibian A4 Xtreme Sea Green LEDs
OceanLED SPEC A4 XTREME / 112813 / v4.3
BELOW
WATER
ALL-IN-1
TECHNOLOGY
HIGHLY
IMPACT Tritonium
RESISTANT
Color
Ultra White
Midnight Blue
Sea Green
Part #
UPC/EAN #
001-600180
5051803004950
001-600181
5051803004967
001-600182
5051803004974
Mounting Recommendations
A4 Xtreme
Boat size
up to 30’ (9m)
Transom / Hull spacing
2-3’ (0.5-1m)
Transom quantity
2
For above and below water use
Technical
Light output equivalent to
80W Halogen
Fixture Lumens* (total light output from a finished fixture)
700
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Current / Amp draw (DC)
12V DC 0.5A
24V DC 0.25A
Approx. light penetration (avg. water quality)
16.5’ (5m)
Approx. Light penetration (perfect water quality)
up to 42’ (13+m)
Driver type
Internal
Physical
5.25” (133.5mm)
Width of fixture
2.77” (70.5mm)
Profile (height) of fixture
0.76” (19.5mm)
Total weight
TBA
Extension cable length (standard)
97/64’ (3m)
Hole cut-out for cable entry
1/2” (12mm) - 5/8” (15mm)
Material
Chemically resistant optical polymer
Accessories
Black Polymer Bezel
316L Stainless Steel Bezel
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Length of fixture
OceanLED Smart Light Technology
Part#
001-600209
001-600183
4 Way V DC Power Junction Box
001-500247
Remote12 Wireless Remote Control Kit (Includes 1 FOB)
USA only.
001-600160
Remote12/24 Wireless Remote Control Kit (Includes 2
FOBs) USA only.
001-600161
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Amphibian Xtreme Series
Amphibious
A8
Amphibian A8 Xtreme
20
14
Underwater & Above Water Lighting Excellence
New Amphibian Xtreme LED lights are extremely bright, more than 3 1/2 times
the brightness of the previous Amphibians T-Series equivalents, and are the ideal
choice for your boat and trailer to attract fish and bait, light up your wake, and
create incredible nighttime lighting effects above and below water.
Exceptionally easy to install and may be used underwater on the transom, hull, or
above water on your T-top, engine brackets or cowling, under your gunnels, as a
mast up-lighter, in your engine compartment, and even on your trailer or tailgate
for night launching.
Maintenance is easy due to its Tritonium™ coating (available on all OceanLED
lights); just wipe away marine growth.
•1/2” Hole in Hull
•Equal to 35W Xenon
•12/24V DC
•40,000+ Hour Life
•Chemically Resistant Polymer
•Twin Core Wire
•Factory Sealed Unit
•No Breakable Parts
Built-in driver, ultra low power draw, no start-up current required, reverse polarity
protection. Suitable for all types of hulls.
Amphibian Xtreme lights are designed for underwater or above water use on boats. Not intended for use as Dock
Lighting; please see our Dock Light Series.
Quick Specs
40K
HOURS
LIFE
SPAN
12V DC
24V DC
ABOVE
1400
FIXTURE
LUMENS
WATER
60°
BEAM
Description
Amphibian A8 Xtreme Ultra White LEDs
Amphibian A8 Xtreme Midnight Blue LEDs
Amphibian A8 Xtreme Sea Green LEDs
OceanLED SPEC A8 XTREME / 112813 / v4.3
BELOW
WATER
ALL-IN-1
TECHNOLOGY
HIGHLY
IMPACT Tritonium
RESISTANT
Color
Ultra White
Midnight Blue
Sea Green
Part #
UPC/EAN #
001-600184
5051803004998
001-600185
5051803005001
001-600186
5051803005018
Mounting Recommendations
A8 Xtreme
Boat size
up to 33’ (10m)
Transom / Hull spacing
2-3’ (0.5-1m)
Transom quantity
2-4
For above and below water use
Technical
Light output equivalent to
35W Xenon
Fixture Lumens* (total light output from a finished fixture)
1400
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Current / Amp draw (DC)
12V DC 1.0A
24V DC 0.5A
Approx. light penetration (avg. water quality)
23’ (7m)
Approx. Light penetration (perfect water quality)
up to 70’ (21+m)
Driver type
Internal
Physical
8.6” (218.5mm)
Width of fixture
2.89” (73.5mm)
Profile (height) of fixture
0.76” (19.5mm)
Total weight
TBA
Extension cable length (standard)
97/64’ (3m)
Hole cut-out for cable entry
1/2” (12mm) - 5/8” (15mm)
Material
Chemically resistant optical polymer
Accessories
Black Polymer Bezel
316L Stainless Steel Bezel
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Length of fixture
OceanLED Smart Light Technology
Part#
001-600210
001-600187
4 Way V DC Power Junction Box
001-500247
Remote12 Wireless Remote Control Kit (Includes 1 FOB)
(USA only).
001-600160
Remote12/24 Wireless Remote Control Kit (Includes 2
FOBs) (USA only.
001-600161
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Amphibian Xtreme Series
Amphibious
A16
Amphibian A16 Xtreme
20
14
Underwater & Above Water Lighting Excellence
New Amphibian Xtreme LED lights are extremely bright, more than 3 1/2 times
the brightness of the previous Amphibians T-Series equivalents, and are the ideal
choice for your boat and trailer to attract fish and bait, light up your wake, and
create incredible nighttime lighting effects above and below water.
Exceptionally easy to install and may be used underwater on the transom, hull, or
above water on your T-top, engine brackets or cowling, under your gunnels, as a
mast up-lighter, in your engine compartment, and even on your trailer or tailgate
for night launching.
Maintenance is easy due to its Tritonium™ coating (available on all OceanLED
lights); just wipe away marine growth.
•1/2” Hole in Hull
•Equal to 100w Xenon
•12/24V DC
•40,000+ Hour Life
•Chemically Resistant Polymer
•Twin Core Wire
•Factory Sealed Unit
•No Breakable Parts
Built-in driver, ultra low power draw, no start-up current required, reverse polarity
protection. Suitable for all types of hulls.
Amphibian Xtreme lights are designed for underwater or above water use on boats. Not intended for use as Dock
Lighting; please see our Dock Light Series.
Quick Specs
40K
HOURS
LIFE
SPAN
12V DC
24V DC
ABOVE
2800
FIXTURE
LUMENS
WATER
60°
BEAM
BELOW
WATER
Description
Amphibian A16 Xtreme Ultra White LEDs
Amphibian A16 Xtreme Midnight Blue LEDs
Amphibian A16 Xtreme Sea Green LEDs
OceanLED SPEC A16 XTREME / 112813 / v4.3
ALL-IN-1
TECHNOLOGY
HIGHLY
IMPACT Tritonium
RESISTANT
Color
Ultra White
Midnight Blue
Sea Green
Part #
UPC/EAN #
001-600188
5051803005032
001-600189
5051803005049
001-600190
5051803005056
Mounting Recommendations
A16 Xtreme
Boat size
up to 50’ (15m)
Transom / Hull spacing
2-4’ (0.5-1.2m)
Transom quantity
2-4
For above and below water use
Technical
Light output equivalent to
100W Xenon
Fixture Lumens* (total light output from a finished fixture)
2800
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Current / Amp draw (DC)
12V DC 2.15A
24V DC 1.0A
Approx. light penetration (avg. water quality)
29’ (9m)
Approx. Light penetration (perfect water quality)
up to 85’ (25+m)
Driver type
Internal
Physical
9.7” (246.5mm)
Width of fixture
4.11” (104.5mm)
Profile (height) of fixture
0.76” (19.5mm)
Total weight
TBA
Extension cable length (standard)
97/64’ (3m)
Hole cut-out for cable entry
1/2” (12mm) - 5/8” (15mm)
Material
Chemically resistant optical polymer
Accessories
Black Polymer Bezel
316L Stainless Steel Bezel
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Length of fixture
OceanLED Smart Light Technology
Part#
001-600211
001-600191
4 Way V DC Power Junction Box
001-500247
Remote12 Wireless Remote Control Kit (Includes 1 FOB)
(USA only).
001-600160
Remote12/24 Wireless Remote Control Kit (Includes 2
FOBs) (USA only).
001-600161
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Amphibian Pro Xtreme Series
Underwater
A4Pro
Amphibian A4 Pro Xtreme
20
14
Underwater Lighting Excellence
New Amphibian Pro Xtreme underwater LED lights are extremely bright, our
brightest Amphibians ever, more than triple the brightness of the previous
Amphibian Pro Series equivalents. The larger models (A8 Pro and A16 Pro)
feature ‘Colours’ color-change; toggle between 8 different colors, strobe 8
different colors, or scroll between 8 different color scene variations.
•1/2” Hole in Hull
Exceptionally easy to install on the transom or hull; use underwater to light up
your wake and create incredible nighttime lighting effects, and the new strobe
feature is ideal for attracting fish and bait.
•Chemically Resistant Polymer
Maintenance is easy due to its Tritonium™ coating (available on all OceanLED
lights); just wipe away marine growth.
•No Breakable Parts
•Equal to Some 35W Xenons
•12/24V DC
•40,000+ Hour Life
•Twin Core Wire
•Factory Sealed Unit
•316L Stainless Steel Bezel
Built-in driver, ultra low power draw, no start-up current required, reverse polarity
protection. Suitable for all types of hulls.
Amphibian Pro Xtreme Series lights are designed for underwater use on boats. For above water use choose Amphibian
Xtreme models. Not intended for use as Dock Lighting; please see our Dock Light Series.
Quick Specs
HOURS
40K
12V DC
1000
LIFE
SPAN
24V DC
FIXTURE
LUMENS
60°
ALL-IN-1
TECHNOLOGY
BEAM
Description
Amphibian A4 PRO Xtreme Ultra White LEDs
Amphibian A4 PRO Xtreme Midnight Blue LEDs
Amphibian A4 PRO Xtreme Sea Green LEDs
OceanLED SPEC A4PRO XTREME / 112813 / v4.3
316L
HIGHLY
Stainless
IMPACT Tritonium Steel
RESISTANT
Bezel
Color
Ultra White
Midnight Blue
Sea Green
Part #
UPC/EAN #
001-600192
5051803005070
001-600193
5051803005087
001-600194
5051803005094
Mounting Recommendations
A4 Pro Xtreme
Boat size
up to 30’ (9m)
Transom / Hull spacing
2-3’ (0.5-1m)
Transom quantity
2-4
Installation depth (to top of fixture)
4-8” (10-20cm)
Technical
Light output equivalent to
Some 35W Xenons
Fixture Lumens* (total light output from a finished fixture)
1000
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Current / Amp draw (DC)
12V DC 0.8A
24V DC 0.4A
Approx. light penetration (avg. water quality)
20’ (6m)
Approx. Light penetration (perfect water quality)
up to 45’ (13+m)
Driver type
Internal
Physical
5.25” (133.5mm)
Width of fixture
2.77” (70.5mm)
Profile (height) of fixture
0.76” (19.5mm)
Total weight
TBA
Extension cable length (standard)
97/64’ (3m)
Hole cut-out for cable entry
1/2” (12mm) - 5/8” (15mm)
Material
Chemically resistant optical polymer
Accessories
Black Polymer Bezel
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Length of fixture
OceanLED Smart Light Technology
Part#
001-600211
4 Way V DC Power Junction Box
001-500247
Remote12 Wireless Remote Control Kit (Includes 1 FOB)
(USA only).
001-600160
Remote12/24 Wireless Remote Control Kit (Includes 2
FOBs) (USA only).
001-600161
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Amphibian Pro Xtreme Series
Underwater
A8Pro
Amphibian A8 Pro Xtreme
20
14
Underwater Lighting Excellence
New Amphibian Pro Xtreme underwater LED lights are extremely bright, our
brightest Amphibians ever, more than triple the brightness of the previous
Amphibian Pro Series equivalents. The larger models (A8 Pro and A16 Pro)
feature ‘Colours’ color-change; toggle between 8 different colors, strobe 8
different colors, or scroll between 8 different color scene variations.
•1/2” Hole in Hull
Exceptionally easy to install on the transom or hull; use underwater to light up
your wake and create incredible nighttime lighting effects, and the new strobe
feature is ideal for attracting fish and bait.
•Chemically Resistant Polymer
Maintenance is easy due to its Tritonium™ coating (available on all OceanLED
lights); just wipe away marine growth.
•No Breakable Parts
•Equal to 50w Xenon
•12/24V DC
•40,000+ Hour Life
•Twin Core Wire
•Factory Sealed Unit
•316L Stainless Steel Bezel
Built-in driver, ultra low power draw, no start-up current required, reverse polarity
protection. Suitable for all types of hulls.
Amphibian Pro Xtreme Series lights are designed for underwater use on boats. For above water use choose Amphibian
Xtreme models. Not intended for use as Dock Lighting; please see our Dock Light Series.
Quick Specs
HOURS
40K
12V DC
2100
LIFE
SPAN
24V DC
FIXTURE
LUMENS
60°
ALL-IN-1
TECHNOLOGY
BEAM
Description
Amphibian A8 PRO Xtreme Ultra White LEDs
Amphibian A8 PRO Xtreme Midnight Blue LEDs
Amphibian A8 PRO Xtreme Sea Green LEDs
316L
HIGHLY
Stainless
IMPACT Tritonium Steel
RESISTANT
Bezel
Color
Ultra White
Midnight Blue
Sea Green
Amphibian A8 PRO Xtreme Color Change LEDs
Color Change
OceanLED SPEC A8PRO XTREME / 112813 / v4.3
fgdg
Part #
UPC/EAN #
001-600196
5051803005117
001-600197
5051803005124
001-600198
5051803005131
001-600199
5051803005148
Mounting Recommendations
A8 Pro Xtreme
Boat size
up to 50’ (15m)
Transom / Hull spacing
2-4’ (0.5-1.2m)
Transom quantity
2-4
Installation depth (to top of fixture)
4-8” (10-20cm)
Technical
Light output equivalent to
50W Xenon
Fixture Lumens* (total light output from a finished fixture)
2100
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Current / Amp draw (DC) (Amperage draw for Colours models
vary by color selected, this is the maximum)
12V DC 1.65A
24V DC 0.75A
Approx. light penetration (avg. water quality)
26’ (8m)
Approx. Light penetration (perfect water quality)
up to 72’ (21+m)
Driver type
Internal
Physical
8.6” (218.5mm)
Width of fixture
2.89” (73.5mm)
Profile (height) of fixture
0.76” (19.5mm)
Total weight
TBA
Extension cable length (standard)
97/64’ (3m)
Hole cut-out for cable entry
1/2” (12mm) - 5/8” (15mm)
Material
Chemically resistant optical polymer
Accessories
Black Polymer Bezel
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Length of fixture
OceanLED Smart Light Technology
Part#
001-600211
4 Way V DC Power Junction Box
001-500247
Remote12 Wireless Remote Control Kit (Includes 1 FOB)
(USA only).
001-600160
Remote12/24 Wireless Remote Control Kit (Includes 2
FOBs) (USA only).
001-600161
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Amphibian Pro Xtreme Series
Underwater
A16Pro
Amphibian A16 Pro Xtreme
20
14
Underwater Lighting Excellence
New Amphibian Pro Xtreme underwater LED lights are extremely bright, our
brightest Amphibians ever, more than triple the brightness of the previous
Amphibian Pro Series equivalents. The larger models (A8 Pro and A16 Pro)
feature ‘Colours’ color-change; toggle between 8 different colors, strobe 8
different colors, or scroll between 8 different color scene variations.
•1/2” Hole in Hull
Exceptionally easy to install on the transom or hull; use underwater to light up
your wake and create incredible nighttime lighting effects, and the new strobe
feature is ideal for attracting fish and bait.
•Chemically Resistant Polymer
Maintenance is easy due to its Tritonium™ coating (available on all OceanLED
lights); just wipe away marine growth.
•No Breakable Parts
•Equal to Some 150W HIDs
•12/24V DC
•40,000+ Hour Life
•Twin Core Wire
•Factory Sealed Unit
•316L Stainless Steel Bezel
Built-in driver, ultra low power draw, no start-up current required, reverse polarity
protection. Suitable for all types of hulls.
Amphibian Pro Xtreme Series lights are designed for underwater use on boats. For above water use choose Amphibian
Xtreme models. Not intended for use as Dock Lighting; please see our Dock Light Series.
Quick Specs
HOURS
40K
12V DC
4200
LIFE
SPAN
24V DC
FIXTURE
LUMENS
60°
ALL-IN-1
TECHNOLOGY
BEAM
Description
Amphibian A16 PRO Xtreme Ultra White LEDs
Amphibian A16 PRO Xtreme Midnight Blue LEDs
Amphibian A16 PRO Xtreme Sea Green LEDs
316L
HIGHLY
Stainless
IMPACT Tritonium Steel
RESISTANT
Bezel
Color
Ultra White
Midnight Blue
Sea Green
Amphibian A16 PRO Xtreme Color Change LEDs
Color Change
OceanLED SPEC A16PRO XTREME / 112813 / v4.3
Part #
UPC/EAN #
001-600200
5051803005155
001-600201
5051803005162
001-600202
5051803005179
001-600203
5051803005186
Mounting Recommendations
A16 Pro Xtreme
Boat size
up to 65’ (20m)
Transom / Hull spacing
2-4’ (0.5-1.2m)
Transom quantity
2-6
Installation depth (to top of fixture)
4-8in (10-20cm)
Technical
Light output equivalent to
Some 150W HIDs
Fixture Lumens* (total light output from a finished fixture)
4200
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Current / Amp draw (DC) (Amperage draw for Colours models
vary by color selected, this is the maximum)
12V DC 3.2A
24V DC 1.5A
Approx. light penetration (avg. water quality)
40’ (12m)
Approx. Light penetration (perfect water quality)
up to 100’ (30+m)
Driver type
Internal
Physical
9.7” (246.5mm)
Width of fixture
4.11” (104.5mm)
Profile (height) of fixture
0.76” (19.5mm)
Total weight
TBA
Extension cable length (standard)
97/64’ (3m)
Hole cut-out for cable entry
1/2” (12mm) - 5/8” (15mm)
Material
Chemically resistant optical polymer
Accessories
Black Polymer Bezel
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Length of fixture
OceanLED Smart Light Technology
Part#
001-600211
4 Way V DC Power Junction Box
001-500247
Remote12 Wireless Remote Control Kit (Includes 1 FOB)
(USA only).
001-600160
Remote12/24 Wireless Remote Control Kit (Includes 2
FOBs) (USA only).
001-600161
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Pro Series HD Gen2
Underwater
2010TH
2010TH HD Gen2
20
14
High Definition Underwater Lighting Excellence
The original Thru-Hull with the world’s smallest hole cut-out for a thru hull light at
only 1” is now brighter again – the 2010TH HD Gen2 model is 67% brighter than its
predecessor by exploiting the next generation of High Definition LEDs from Cree.
•1” Hole in Hull
With 7,000-fixture lumen brightness and a 1-inch (25mm) profile head make the
2010TH the ideal underwater light for transom mount applications.
•Equal to 250w HID/Metal Halide
Suitable for all hull types up to and over 65’ (20m) using 2-6 lights with spacing of
3-5’ (1-1.5m) – for metal hulls, choose the Delrin Isolation Sleeve accessory. Deutsch
plug-and-play quick connectors make this light a quick fit. Maintenance is easy; just
wipe away marine growth from its scratch resistant Tritonium™ glass lens. Three
super bright LED color options.
•40,000+ Hour Life
For an even brighter light choose 3010TH HD Gen2. For a light with a lower profile
head for hull mount applications, or that can be exchanged without hauling, choose
from our XFM models. For a light with color-change capabilities choose from our
Colours models.
•67% Brighter than the Original
2010
•12/24V DC (AC Upgrade Option)
•Aluminium Bronze AB2
•Plug & Play
•Factory Sealed Unit
•No Breakable Parts
Quick Specs
HOURS
40K
110V AC 7000
12V DC 240V
AC
LIFE
SPAN
AC
UPGRADE
24V DC
FIXTURE
LUMENS
Tritonium
60/140°
PRIMARY/SECONDARY BEAM
OPTICAL
LENS
REVERSE
POLARITY
PROTECTION
Description
Pro Series 2010TH HD Gen2 Ultra White LEDs w/Linear Optics
Pro Series 2010TH HD Gen2 Midnight Blue LEDs w/Linear Optics
Pro Series 2010TH HD Gen2 Sea Green LEDs w/Linear Optics
OceanLED SPEC 2010TH HD / 112813 / v4.3
Color
Ultra White
Midnight Blue
Sea Green
Part #
UPC/EAN #
001-500730 5051803005421
001-500731
5051803005438
001-500732
5051803005445
Mounting Recommendations
2010TH HD
Boat size
up to and over 65’ (20m)
Transom / Hull spacing
3-5’ (1-1.5m)
Transom quantity
2-6
Maximum hull thickness
31/2” (90mm)
Installation depth (to top of fixture)
8-10in (200-250mm)
Technical
Light output equivalent to
250W HID Metal Halides
Fixture Lumens* (total light output from a finished fixture)
7000
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Minimum-Maximum operating voltage AC
90-270V AC
Current / Amp draw (DC)
12V DC 5.8A
24V DC 2.9A
Current / Amp draw (AC/optional)
110V AC 50/60HZ 0.76A
240V AC 50/60HZ 0.35A
Approx. light penetration (avg. water quality)
59’ (18m)
Approx. Light penetration (perfect water quality)
up to 140’ (45+m)
Driver type
External
Driver size (L x W x H)
TBA
Diameter of fixture
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Physical
OceanLED Smart Light Technology
51/2” (140mm)
Delrin Isolation Sleeve for 2010/COLOURS Thru-Hull
001-500164
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
Locking Nut Kit for All Thru-Hull Models
050-000029
2m (6.5’) Plug & Play Extension Cable (Gen2)
001-500753
Contents include:
6m (19.5’) Plug & Play Extension Cable (Gen2)
001-500754
4 Way V DC Power Junction Box
001-500247
Pro Series HD Gen2 AC/Mains Power Pack
001-500755
Profile (height) of fixture
17/32” (30.8mm)
Total weight including electrical driver
5.5lbs (2.5kgs)
Extension cable length (standard-hard wired to light)
61/2’ (2m)
Hole cut-out for cable entry
1” (26mm)
Material
Aluminium Bronze AB2
Lens
Accessories
Tritonium™ Optical Lens
Part#
• 12/24V DC Driver w/Power Cable
• 2m/6’ Connection Cable
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Pro Series HD Gen2
Underwater
3010TH
3010TH HD Gen2
20
14
High Definition Underwater Lighting Excellence
The original Thru-Hull with the world’s smallest hole cut-out for a thru hull light
at only 1” is now brighter again – the 3010TH HD Gen2 model is 43% brighter
than its predecessor by exploiting the next generation of High Definition LEDs
from Cree.
With 10,000-fixture lumen brightness and a 1-inch (25mm) profile head make
the 3010TH the ideal underwater light for transom mount applications.
•1” Hole in Hull
•43% Brighter than the Original
3010
•Equal to 2 x 150w HID/Metal
Halide
•12/24V DC (AC Upgrade Option)
Suitable for all hull types over 65’ (20m) using 4 or more lights with
spacing of 3-6’ (1-1.8m) – for metal hulls, choose the Delrin Isolation Sleeve
accessory. Deutsch plug-and-play quick connectors make this light a quick fit.
Maintenance is easy; just wipe away marine growth from its scratch resistant
Tritonium™ glass lens. Three super bright LED color options.
•40,000+ Hour Life
For a light that’s less bright choose 2010TH HD Gen2. For a light with a
lower profile head for hull mount applications, or that can be exchanged
without hauling, choose from our XFM models. For a light with color-change
capabilities choose from our Colours models.
•No Breakable Parts
•Aluminium Bronze AB2
•Plug & Play
•Factory Sealed Unit
Quick Specs
40K
110V AC 10000
12V DC 240V
AC
LIFE
SPAN
24V DC
HOURS
AC
UPGRADE
FIXTURE
LUMENS
Tritonium
60/140°
PRIMARY/SECONDARY BEAM
OPTICAL
LENS
REVERSE
POLARITY
PROTECTION
Description
Pro Series 3010TH HD Gen2 Ultra White LEDs w/Linear Optics
Pro Series 3010TH HD Gen2 Midnight Blue LEDs w/Linear Optics
Pro Series 3010TH HD Gen2 Sea Green LEDs w/Linear Optics
OceanLED SPEC 3010TH HD / 112813 / v4.3
Color
Ultra White
Midnight Blue
Sea Green
Part #
UPC/EAN #
001-500734
5051803005469
001-500735
5051803005476
001-500736
5051803005483
Mounting Recommendations
3010TH HD
Boat size
over 65’ (20m)
Transom / Hull spacing
3-6’ (1-1.8m)
Transom quantity
4+
Maximum hull thickness
31/2” (90mm)
Installation depth (to top of fixture)
10-12in (250-300mm)
Technical
2 x 150W HID Metal
Halides
Fixture Lumens* (total light output from a finished fixture)
10000
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Minimum-Maximum operating voltage AC
90-270V AC
Current / Amp draw (DC)
12V DC 10A
24V DC 5A
Current / Amp draw (AC/optional)
110V AC 50/60HZ 1.3A
240V AC 50/60HZ 0.6A
Approx. light penetration (avg. water quality)
72’ (22m)
Approx. Light penetration (perfect water quality)
up to 165’ (50+m)
Driver type
External
Driver size (L x W x H)
TBA
Physical
Diameter of fixture
Profile (height) of fixture
529/32” (150mm)
113/64” (30.6mm)
Total weight including electrical driver
6.6lbs (3kgs)
Extension cable length (standard-hard wired to light)
61/2’ (2m)
Hole cut-out for cable entry
1” (26mm)
Material
Aluminium Bronze AB2
Lens
Accessories
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Light output equivalent to
OceanLED Smart Light Technology
Tritonium™ Optical Lens
Part#
Delrin Isolation Sleeve for 3010 Thru-Hull
001-500165
Locking Nut Kit for All Thru-Hull Models
050-000029
2m (6.5’) Plug & Play Extension Cable (Gen2)
001-500753
6m (19.5’) Plug & Play Extension Cable (Gen2)
001-500754
4 Way V DC Power Junction Box
001-500247
Pro Series HD Gen2 AC/Mains Power Pack
001-500755
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
Contents include:
• 12/24V DC Driver w/Power Cable
• 2m/6’ Connection Cable
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
OceanLED Marine
Pro Series HD Gen2
Accessories
Delrin Sleeve
Delrin Isolation Sleeve
20
14
Underwater Lighting Excellence
When a weld-in underwater lighting fixture is not an option, use the Delrin
Isolation Sleeve to isolate the underwater light or camera from the aluminum
or steel hull.
Designed as an accessory to the Pro-Series Thru-Hull underwater light range
and Eyes underwater camera.
Description
•13/8” (34mm) Hole in Hull for
Pro-Series Thru-Hull models
2010, 3010, Colours TH and Eyes
camera
Part #
UPC/EAN #
Delrin Isolation Sleeve for 2010/COLOURS Thru-Hull
001-500164
5051803001102
Delrin Isolation Sleeve for 3010 Thru-Hull
001-500165
5051803001119
Delrin Isolation Sleeve for Eyes Underwater Camera
001-500339
5051803001881
Delrin Isolation Sleeve also available for Pro Series HD Gen2 XFM models. See SPEC DELRIN XFM.
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED SPEC DELRIN THRU HULL / 112813 / v4.3
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
20
14
THIS PAGE INTENTIONALLY LEFT BLANK
NEW!
OceanLED Marine
Pro Series HD Gen2
Underwater
2010XFM
2010XFM HD Gen2
20
14
High Definition Underwater Lighting Excellence
XFM models, or Xchangeable Flush Mounts, are just that – they’re
exchangeable without hauling should servicing ever be needed. Their
exceptionally low profile head offers virtually unlimited hull mounting options,
including retrofitting into most existing underwater lighting hole cut-outs,
yielding immediate benefits of no startup power surge, low heat, minimal
maintenance, and improved light output.
•Xchangeable from Inside the Hull
•Equal to 250w HID/Metal Halide
•4” Hole
•12/24V DC (AC Upgrade Option)
•40,000+ Hour Life
At 7,000-fixture lumen brightness the 2010XFM HD Gen2 model is 67%
brighter than its predecessor by exploiting the next generation of High
Definition LEDs from Cree.
•Aluminium Bronze AB2 Bezel/
Hard Anodized Aluminium Body
Suitable for all hull types up to and over 65’ (20m) using 2-6 lights with
spacing of 3-5’ (1-1.5m) – for metal hulls, add the Delrin Isolation Sleeve
accessory. Deutsch plug-and-play quick connectors make this light a quick fit.
Maintenance is easy; just wipe away marine growth from its scratch resistant
Tritonium™ glass lens. Three super bright LED color options.
•Factory Sealed Unit
•Plug & Play
For an even brighter light choose 3010XFM HD Gen2. For a light with a smaller
hole cut-out better suited for transom mount applications choose 2010TH. For
a light with color-change capabilities choose from our Colours models.
Quick Specs
40K
HOURS
LIFE
SPAN
110V AC
12V DC 240V
AC
24V DC
AC
UPGRADE
7000
FIXTURE
LUMENS
Tritonium
60/140°
PRIMARY/SECONDARY BEAM
OPTICAL
LENS
REVERSE
POLARITY
PROTECTION
Description
Pro Series 2010XFM HD Gen2 Ultra White LEDs w/Linear Optics
Pro Series 2010XFM HD Gen2 Midnight Blue LEDs w/Linear Optics
Pro Series 2010XFM HD Gen2 Sea Green LEDs w/Linear Optics
OceanLED SPEC 2010XFM HD / 112813 / v4.3
IN
WATER
REFITTING
Color
Ultra White
Midnight Blue
Sea Green
Part #
UPC/EAN #
001-500744
5051803005568
001-500745
5051803005575
001-500746
5051803005582
Mounting Recommendations
2010XFM HD
Boat size
up to and over 65’ (20m)
Transom / Hull spacing
3-5’ (1-1.5m)
Transom quantity
2-6
Hull quantity
4+/side
Maximum hull thickness
4” (100mm)
Installation depth (to top of fixture)
10-12in (250-300mm)
Technical
Light output equivalent to
250W HID Metal Halides
Fixture Lumens* (total light output from a finished fixture)
7000
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Minimum-Maximum operating voltage AC (AC/optional)
90-270V AC
Current / Amp draw (DC)
12V DC 5.8A
24V DC 2.9A
110V AC 50/60HZ 0.76A
240V AC 50/60HZ 0.35A
Approx. light penetration (avg. water quality)
59’ (18m)
Approx. Light penetration (perfect water quality)
up to 140’ (45+m)
Driver type
External
Driver size (L x W x H)
TBA
Physical
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Current / Amp draw (AC/optional)
OceanLED Smart Light Technology
Part#
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
Delrin Isolation Sleeve for 2010/COLOURS XFM
001-500573
Contents include:
Locking Nut Kit for 2010 XFM
001-500398
2m (6.5’) Plug & Play Extension Cable (Gen2)
001-500753
• 12/24V DC Driver w/Power Cable
• 2m/6’ Connection Cable
6m (19.5’) Plug & Play Extension Cable (Gen2)
001-500754
4 Way V DC Power Junction Box
001-500247
Pro Series HD Gen2 AC/Mains Power Pack
001-500755
Diameter of fixture
Profile (height) of fixture
619/64” (160mm)
45/64” (17.8mm)
Total weight including electrical driver
11.2lbs (5.1kgs)
Extension cable length (standard-hard wired to light)
61/2’ ( 2m)
Hole cut-out for cable entry
4” (100mm)
Material
Aluminium Bronze AB2
Lens
Accessories
Tritonium™ Optical Lens
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Pro Series HD Gen2
Underwater
3010XFM
3010XFM HD Gen2
20
14
High Definition Underwater Lighting Excellence
XFM models, or Xchangeable Flush Mounts, are just that – they’re exchangeable
without hauling should servicing ever be needed. Their exceptionally low profile
head offers virtually unlimited hull mounting options, including retrofitting into
most existing underwater lighting hole cut-outs, yielding immediate benefits of no
startup power surge, low heat, minimal maintenance, and improved light output.
•Equal to 2 x 150w HID/Metal
Halide
At 10,000-fixture lumen brightness the 3010XFM HD Gen2 model is 43% brighter
than its predecessor by exploiting the next generation of High Definition LEDs from
Cree.
•40,000+ Hour Life
Suitable for all hull types over 65’ (20m) using 4 or more lights with spacing of 3-6’
(1-1.8m) – for metal hulls, add the Delrin Isolation Sleeve accessory. Deutsch plugand-play quick connectors make this light a quick fit. Maintenance is easy; just wipe
away marine growth from its scratch resistant Tritonium™ glass lens. Three super
bright LED color options.
•Xchangeable from Inside the Hull
•41/2” Hole
•12/24V DC (AC Upgrade Option)
•Aluminium Bronze AB2 Bezel/
Hard Anodized Aluminium Body
•Plug & Play
•Factory Sealed Unit
For a light that’s less bright choose 2010XFM HD Gen2. For a light with a smaller
hole cut-out better suited for transom mount applications choose 3010TH. For a
light with color-change capabilities choose from our Colours models.
Quick Specs
40K
HOURS
LIFE
SPAN
110V AC 10000
12V DC 240V
AC
24V DC
AC
UPGRADE
FIXTURE
LUMENS
Tritonium
60/140°
PRIMARY/SECONDARY BEAM
OPTICAL
LENS
REVERSE
POLARITY
PROTECTION
Description
Pro Series 3010XFM HD Gen2 Ultra White LEDs w/Linear Optics
Pro Series 3010XFM HD Gen2 Midnight Blue LEDs w/Linear Optics
Pro Series 3010XFM HD Gen2 Sea Green LEDs w/Linear Optics
OceanLED SPEC 3010XFM HD / 051413 / v3.3
IN
WATER
REFITTING
Color
Ultra White
Midnight Blue
Sea Green
Part #
UPC/EAN #
001-500748
5051803005605
001-500749
5051803005612
001-500750
5051803005629
Mounting Recommendations
3010XFM HD
Boat size
over 65’ (20m)
Transom / Hull spacing
3-6’ (1-1.8m)
Transom quantity
4+
Hull quantity
4+/side
Maximum hull thickness
4” (100mm)
Installation depth (to top of fixture)
10-12” (250-300mm)
Technical
2 x 150W HID Metal
Halides
Fixture Lumens* (total light output from a finished fixture)
10000
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage DC
9-32V DC
Minimum-Maximum operating voltage AC (AC/optional)
90-270V AC
Current / Amp draw (DC)
12V DC 10A
24V DC 5A
Current / Amp draw (AC/optional)
110V AC 50/60HZ 1.3A
240V AC 50/60HZ 0.6A
Approx. light penetration (avg. water quality)
72’ (22m)
Approx. Light penetration (perfect water quality)
up to 165’ (50+m)
Driver type
External
Driver size (L x W x H)
TBA
Physical
Diameter of fixture
Profile (height) of fixture
7
” (180mm)
5/64
5/8” (16mm)
Total weight including electrical driver
14.7lbs (6.7kgs)
Extension cable length (standard-hard wired to light)
61/2’ (2m )
Hole cut-out for cable entry
41/2” (114mm)
Material
Aluminium Bronze AB2
Lens
Accessories
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Light output equivalent to
OceanLED Smart Light Technology
Tritonium™ Optical Lens
Part#
Delrin Isolation Sleeve for 3010 XFM
001-500575
Locking Nut Kit for 3010 XFM
001-500399
2m (6.5’) Plug & Play Extension Cable (Gen2)
001-500753
6m (19.5’) Plug & Play Extension Cable (Gen2)
001-500754
4 Way V DC Power Junction Box
001-500247
Pro Series HD Gen2 AC/Mains Power Pack
001-500755
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
Contents include:
• 12/24V DC Driver w/Power Cable
• 2m/6’ Connection Cable
*Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained
from either a Goniophotometer or an Integrating sphere. Fixture Lumens is the most reliable, professional measurement of light output.
OceanLED has heavily invested in these measurement apparatus and has had all its data verified by the Lighting Association of Great
Britain.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
OceanLED Marine
Pro Series HD Gen2
Accessories
Delrin Sleeve
Delrin Isolation Sleeve
20
14
Underwater Lighting Excellence
When a weld-in underwater lighting fixture is not an option, use the Delrin Isolation
Sleeve to isolate the underwater light from the aluminum or steel hull.
Designed as an accessory to the Pro-Series Xchangeable Flush Mount underwater
light range.
Description
•4” (100mm) Hole in Hull for ProSeries 2010 Xchangeable Flush
Mount
•41/2” (114mm) Hole in Hull for ProSeries 3010 Xchangeable Flush
Mount
Part #
UPC/EAN #
Delrin Isolation Sleeve for 2010/COLOURS XFM
001-500573
5051803003649
Delrin Isolation Sleeve for 3010 XFM
001-500575
5051803003663
Delrin Isolation Sleeve also available for Pro Series HD Gen2 Thru-Hull and EYES Ocean Camera. See SPEC DELRIN THRUHULL.
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED SPEC DELRIN XFM / 112813 / v4.3
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
20
14
THIS PAGE INTENTIONALLY LEFT BLANK
NEW!
OceanLED Marine
Pro Series HD Gen2
Underwater
ColoursTH
Colours TH HD Gen2
20
14
High Definition Underwater Lighting Excellence
Colours by OceanLED are the first high-powered color change underwater
LED lights for boats that allow boat owners to choose the color of their lights
from an unlimited color pallet, and now they’re even brighter!
•1” Hole in Hull
Colours utilize the very latest 4-channel RGBW (Red/Green/Blue/White) High
Definition LEDs. Controlled via DMX-512 through the vessels onboard systems,
or wirelessly via third party devices such as an iPad, iPhone or Android,
Colours allows you to preprogram more than 40 static and dynamic color
scenes to set the mood, enhance an onboard event, strobe to attract fish, or
even change color with the time of day.
•40,000+ Hour Life
The Colours Thru-Hull model with the world’s smallest hole cut-out for a
thru hull light at only 1” and a 1-inch (25mm) profile head make it the ideal
underwater light for transom mount applications.
•Equal to 250w HID/Metal Halide
•110-240V AC
•Aluminium Bronze AB2
•Plug & Play
•Factory Sealed Unit
•No Breakable Parts
Suitable for all hull types up to and over 65’ (20m) using 2-6 lights with
spacing of 3-5’ (1-1.5m) – for metal hulls, add the Delrin Isolation Sleeve
accessory. Deutsch plug-and-play quick connectors make this light a quick fit.
Maintenance is easy; just wipe away marine growth from its scratch resistant
Tritonium™ glass lens.
For a color-change light with a lower profile head for hull mount applications,
or that can be exchanged without hauling, choose Colours XFM. Single-color
models are also available.
See reverse side for additional parts required for Colours models.
Quick Specs
40K
110V AC
Tritonium
LIFE
SPAN
60/140°
240V AC PRIMARY/SECONDARY
BEAM
OPTICAL
LENS
HOURS
REVERSE
DMX
POLARITY
PROTECTION COMPATIBLE
Description
Color
Pro Series COLOURS TH HD Gen2 LEDs w/Linear Optics
Colours
OceanLED SPEC COLOURS TH HD / 112813 / v4.3
Part #
UPC/EAN #
001-500733
5051803005452
Mounting Recommendations
Colours TH HD
Boat size
up to and over 65’ (20m)
Transom / Hull spacing
3-5’ (1-1.5m)
Transom quantity
2-6
Maximum hull thickness
31/2” (90mm)
Installation depth (to top of fixture)
8-10in (200-250mm)
Technical
Light output equivalent to
250W HID Metal Halides
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage AC (AC/only)
90-270V AC
Current / Amp draw (AC/only)
110V AC 50/60HZ 1.1A
240V AC 50/60HZ 0.5A
Approx. light penetration (avg. water quality)
59’ (18m)
Approx. Light penetration (perfect water quality)
up to 140’ (45+m)
Driver type
External
Driver size (L x W x H)
360 x 160 x 90mm
(143/16 x 61/4 x 31/2”)
Physical
51/2” (140mm)
Profile (height) of fixture
17/32” (30.8mm)
Total weight including electrical driver
5.5lbs (2.5kgs)
Extension cable length (standard-hard wired to light)
61/2’ (2m)
Hole cut-out for cable entry
1” (26mm)
Material
Aluminium Bronze AB2
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Diameter of fixture
OceanLED Smart Light Technology
Delrin Isolation Sleeve for 2010/COLOURS Thru-Hull
001-500164
Locking Nut Kit for All Thru-Hull Models
050-000029
2m (6.5’) Plug & Play Extension Cable (Gen2)
001-500753
6m (19.5’) Plug & Play Extension Cable (Gen2)
001-500754
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
IP68 Ethernet DIY Cap
Lens
Accessories
Tritonium™ Optical Lens
Part#
001-500463
Contents include:
Pro Series HD Gen2 Colours Driver & Ethernet Connection
Cable
001-500756
Ethernet Colours Connection Cable (3 Meter)(Included w/
COLOURS Driver)
001-500594
•Colours TH HD Underwater LED Light
w/Cable
•Mounting Kit
•Colours AC Driver w/Cable
•Ethernet Connection Cable
Colours Terminator Kit (Included with DMX Controller)
001-500467
*Add’l required parts for Colours models
Part#
DMX Touch Panel Controller (includes 1 Terminator Kit)
001-500596
DMX Wifi Touch Panel Controller (includes 1 Terminator
Kit)
001-500598
*PARTS REQUIRED FOR COLOURS MODELS: When installing Colours models you will need
to purchase separately one (1) DMX Touch Panel Controller or one (1) DMX Wifi Touch Panel
Controller. For complete installation information refer to the Pro Series HD Installation Manual.
EMC Tested
EN60945 compliant-2004/108/EC
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
NEW!
OceanLED Marine
Pro Series HD Gen2
Underwater
ColoursXFM
Colours XFM HD Gen2
20
14
High Definition Underwater Lighting Excellence
Colours by OceanLED are the first high-powered color change underwater LED
lights for boats that allow boat owners to choose the color of their lights from an
unlimited color pallet, and now they’re even brighter!
Colours utilize the very latest 4-channel RGBW (Red/Green/Blue/White) High
Definition LEDs. Controlled via DMX-512 through the vessels onboard systems, or
wirelessly via third party devices such as an iPad, iPhone or Android, Colours allows
you to preprogram more than 40 static and dynamic color scenes to set the mood,
enhance an onboard event, strobe to attract fish, or even change color with the
time of day.
XFM models, or Xchangeable Flush Mounts, are just that – they’re exchangeable
without hauling should servicing ever be needed. Their exceptionally low profile
head offers virtually unlimited hull mounting options, including retrofitting into
most existing underwater lighting hole cut-outs, yielding immediate benefits of no
startup power surge, low heat, minimal maintenance, and improved light output.
•Xchangeable from Inside the Hull
•Equal to 250w HID/Metal Halide
•4” (100mm) Hole
•110-240V AC
•40,000+ Hour Life
•Aluminium Bronze AB2 Bezel/
Hard Anodized Aluminium Body
•Plug & Play
•Factory Sealed Unit
Suitable for all hull types up to and over 65’ (20m) using 2-6 lights with spacing
of 3-5’ (1-1.5m) – for metal hulls, add the Delrin Isolation Sleeve accessory. Deutsch
plug-and-play quick connectors make this light a quick fit. Maintenance is easy; just
wipe away marine growth from its scratch resistant Tritonium™ glass lens.
For a color-change light with a smaller hole cut-out better suited for transom
mount applications choose Colours TH. Single-color models are also available.
See reverse side for additional parts required for Colours models.
Quick Specs
40K
HOURS
LIFE
SPAN
110V AC
60/140°
240V AC PRIMARY/SECONDARY
BEAM
Tritonium
OPTICAL
LENS
REVERSE
POLARITY
PROTECTION
IN
WATER
REFITTING
Description
DMX
COMPATIBLE
Color
Pro Series COLOURS XFM HD Gen2 LEDs w/Linear Optics
Colours
OceanLED SPEC 2010XFM HD / 112813 / v4.3
Part #
UPC/EAN #
001-500747
5051803005599
Mounting Recommendations
Colours XFM HD
Boat size
up to and over 65ft (20m)
Transom / Hull spacing
3-5’ (1-1.5m)
Transom quantity
2-6
Hull quantity
4+/side
Maximum hull thickness
4” (100mm)
Installation depth (to top of fixture)
10-12in (250-300mm)
Technical
Light output equivalent to
250W HID Metal Halides
Typical LED life expectancy
40,000+ Hours
Minimum-Maximum operating voltage AC (AC/only)
90-270V AC
Current / Amp draw (AC/only)
110V AC 50/60HZ 1.1A
240V AC 50/60HZ 0.5A
Approx. light penetration (avg. water quality)
59’ (18m)
Approx. Light penetration (perfect water quality)
up to 140’ (45+m)
Driver type
External
Driver size (L x W x H)
360 x 160 x 90mm
(143/16 x 61/4 x 31/2”)
Physical
619/64” (160mm)
Profile (height) of fixture
45/64” (17.8mm)
Total weight including electrical driver
11.2lbs (5.1kgs)
Extension cable length (standard-hard wired to light)
61/2’ (2m)
Ethernet Colours Connection Cable
10’ (3m)
Hole cut-out for cable entry
4” (100mm)
Material
Aluminium Bronze AB2
Lens
Accessories
Tritonium™ Optical Lens
Part#
Delrin Isolation Sleeve for 2010/COLOURS XFM
001-500573
Locking Nut Kit for 2010 XFM
001-500398
2m (6.5’) Plug & Play Extension Cable (Gen2)
001-500753
6m (19.5’) Plug & Play Extension Cable (Gen2)
001-500754
IP68 Ethernet DIY Cap
001-500463
Pro Series HD Gen2 Colours Driver & Ethernet Connection
Cable
001-500756
Ethernet Colours Connection Cable (3 Meter)(Included w/
COLOURS Driver)
001-500594
Colours Terminator Kit (Included with DMX Controller)
001-500467
*Add’l required parts for Colours models
Part#
DMX Touch Panel Controller (includes 1 Terminator Kit)
001-500596
DMX Wifi Touch Panel Controller (includes 1 Terminator
Kit)
001-500598
*PARTS REQUIRED FOR COLOURS MODELS: When installing Colours models you will need
to purchase separately one (1) DMX Touch Panel Controller or one (1) DMX Wifi Touch Panel
Controller. For complete installation information refer to the Pro Series HD Installation Manual.
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
All OceanLED lights are factory sealed,
essential for lighting components
subjected to the corrosive marine
environment.
Active Thermal Control
ATC is a continuous monitoring
system built into all OceanLED
lighting products to prevent
overheating, thus improving LED
performance and lumen maintenance. In
the event the lights become overheated,
the ATC system will reduce the LED
power level in order to protect the
LEDs, or in extreme cases, turn off the
fixture completely. All OceanLED lighting
products are tested to work continuously
in an ambient temperature of 65°
Centigrade / 150° Fahrenheit.
Grade A Electrical-Opto
Performance
OceanLED utilizes the very latest
optical methods to achieve
the highest Lumen Per Watt efficacy
ratings on all its products. Combining
optical precision with Grade A Electrical
components ensures maximum life cycles,
minimal heat exposure, and flicker free
operation and dimming.
20
14
Diameter of fixture
OceanLED Smart Light Technology
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
OceanLED 3-Star
3
1
2
Binning Promise
Millions of LEDs are
produced every day, some better than
others. LEDs are sorted or “Binned”
according to their light output, emitted
color, and electrical efficiency. OceanLED
has developed its own unique Bin code
to ensure the highest quality grade LEDs
are selected, essential for the quality and
consistency on which OceanLED prides
itself, and the consumer expects.
Contents include:
•Colours TH HD Underwater LED Light
w/Cable
•Mounting Kit
•Colours AC Driver w/Cable
•Ethernet Connection Cable
EMC Tested
EN60945 compliant-2004/108/EC
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
OceanLED Marine
Pro Series HD Gen2
Accessories
DMX
DMX Touch Panel Controller
20
14
Changing the Underwater Lighting Spectrum
DMX Touch Panel Controller lets you control the color of your Pro Series
HD Colours underwater lights at the touch of a button. This touch sensitive
intelligent control keypad enables the user to easily program up to 8 lighting
effects with a choice of up to 6 million colors.
The Colours application includes a strobe feature which can be used to attract
fish, strobe to music by incorporating into your existing on-board sound
system, or flash a warning using the panic mode feature.
For wifi control, see the DMX Wifi Touch Panel Controller.
•128 individually addressable
lighting fixtures as standard
•5.5 - 12V DC
•Touch sensitive intelligent
control
•Splash resistant
•Compatible with OceanLED
Pro Series HD Colours models
•Easy to use
•Unlimited memory
Quick Specs
6 MILLION
COLORS
WALL
MOUNTABLE
IP
8
5.5 - 12
20
DYNAMIC
/STATIC
SCENES
V DC
BUILT-IN
HARD
DRIVE
Description
Part #
UPC/EAN #
DMX Touch Panel Controller
001-500596
5051803003878
OceanLED SPEC DMX TOUCH CONTROLLER / 112813 / v4.3
Specifications
DMX Touch Panel Controller
Contents include:
Power Supply
From 5.5v to 12V DC (AC/DC adapter in
option)
• 1 DMX Touch Panel S.T.I.C.K Controller
Software
ESA on PC/Windows
ESA2 only on PC/MAC
• 1 Mini USB Cable
Computer Requirement
Windows XP/VISTA/SEVEN 32/64
bits and USB 2.0 (MAC OSx ESA2 only
soon)
Connections
Power (2 pins) DMX (3 pins) Port (2
pins) Micro-usb
Certifications
EC, EMC, ROHS, ETL, UL (some in
process)
Operating Temperature
0˚C to 50˚C
• 1 User Manual
• 1 5.5-12V DC Power Supply with Connector
Block for DMX Connection
• 1 Pre-rigged Waterproof Ethernet Cable
• 1 Terminator Kit
Physical Specifications
Dimensions
86 x 86 x 10mm
Weight
130g
Available Memory
Steps
8
326
16
192
32
48
64
80
96
112
128
20
14
Channels
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
102
68
50
38
31
25
21
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
OceanLED Marine
Pro Series HD Gen2
Accessories
DMX Wifi
DMX Wifi Touch Panel Controller
20
14
Changing the Underwater Lighting Spectrum
DMX Wifi Touch Panel Controller lets you control the color of your Pro Series
HD Colours underwater lights at the touch of a button. This touch sensitive
intelligent control keypad enables the user to easily program more than 40
lighting effects with a choice of up to 16 million colors.
The Colours application includes a strobe feature which can be used to attract
fish or flash a warning using the panic mode feature.
The wifi controller can be easily programmed to create individual colour
scenes, which can then be selected at the touch of a button. With more than
40 dynamic or static scenes and live setting of the intensity and colour of
a scene, any boat owner can turn their Pro Series Colours HD underwater
lights into an integrated part of your boating experience. With a wifi enabled
network, Colours can also be controlled via mobile devices such as an iPhone,
iPad, or Android.
•128 individually addressable
lighting fixtures as standard
•9V DC
•Touch sensitive intelligent
control
•Splash resistant
•Compatible with OceanLED Pro
Series Colours HD
•Wifi compatible
•Easy to use
Quick Specs
16 MILLION
COLORS
ESA
SOFTWARE
WALL
MOUNTABLE
IP
40+
9
20
DYNAMIC
/STATIC
SCENES
V DC
WIFI
COMPATIBLE
Description
Part #
UPC/EAN #
DMX Wifi Touch Panel Controller
001-500598
5051803003892
OceanLED SPEC DMX WIFI TOUCH CONTROLLER / 112813 / v4.3
Technical info
DMX Wifi Touch Panel Controller
Contents include:
Power Supply
9V DC 0.65A
• 1 DMX Wifi Touch Panel S.T.I.C.K Controller
Software
ESA + ESA PRO on PC/Windows
ESA2 only on PC + MAC
• 1 Software: ESA, ESA PRO, SUITE2 and
Application
ARCOLIS + STICK REMOTE on iPhone/iPad/Android
• 1 User Manual
Controller
Comes with infra red remote control to control the
stick with direct line of sight up to 30 feet
• 1 Mini SD Card and 1 Adapter
Wifi*
Wifi app available for smart phones and tablet
devices. *Requires external wifi router.
• 1 9V Power Supply with Connector Block
Router
Easy connection to router via RJ45 on back of
receiver
• 1 Pre-rigged Waterproof Ethernet Cable
Standards
EC, EMC, ROHS, ETL, UL (some in process)
Dimming
Available
Operating Temperature
-10˚C to 50˚C
DMX recorder
• 1 Mini USB Cable
for DMX Connection
• 1 Terminator Kit
Physical Specifications
168 x 128 x 11.5mm
Weight
0.2kg (0.44 lbs)
Image Size
Standard 150 x 110mm picture
20
14
Dimensions
Specifications / Connections
Built-in
features
Screw-terminal rear
connector
(9 pins)
Extention
socket rear
connectors
(2x10 pins)
Power Supply
9V DC 0.65A, supplied
*
DMX Output #1
First universe, 512 channels DMX512
output
*
DMX Output #2
Second universe, 512 channels DMX512
output
USB
USB 2.0 communication for PC/MAC/
software
Ethernet
Advanced networking features
Ports 1,2,3,4
4 Contact closure inputs, connect to
ground for operating
Ports 5,6,7,8
4 Contact closure inputs, connect to
ground for operating
User Interface
14 buttons, 1 fader, 28 leds (touch-sensitive keypad)
SD Card
Micro sd card for stand alone memory use
RESET
Push button for reset operation
RS232
RS232 Serial communication for external
synchronisation
*
Output relay
Automatic stand by 5V signal
*
Clock
Real time clock and calendar, 10 minutes
saving without power
*
Infrared
Receiver
Easy learning triggering from any 36Khz
remote control
*
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
Front access
connections
(open cover)
USB
*
*
*
*
*
*
*
power/data
leds
*
*
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
OceanLED Marine
Pro Series HD Gen2
Accessories
Delrin Sleeve
Delrin Isolation Sleeve
20
14
Underwater Lighting Excellence
When a weld-in underwater lighting fixture is not an option, use the Delrin
Isolation Sleeve to isolate the underwater light or camera from the aluminum
or steel hull.
Designed as an accessory to the Pro-Series Thru-Hull underwater light range
and Eyes underwater camera.
Description
•13/8” (34mm) Hole in Hull for
Pro-Series Thru-Hull models
2010, 3010, Colours TH and Eyes
camera
Part #
UPC/EAN #
Delrin Isolation Sleeve for 2010/COLOURS Thru-Hull
001-500164
5051803001102
Delrin Isolation Sleeve for 3010 Thru-Hull
001-500165
5051803001119
Delrin Isolation Sleeve for Eyes Underwater Camera
001-500339
5051803001881
Delrin Isolation Sleeve also available for Pro Series HD Gen2 XFM models. See SPEC DELRIN XFM.
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED SPEC DELRIN THRU HULL / 112813 / v4.3
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
20
14
THIS PAGE INTENTIONALLY LEFT BLANK
OceanLED Marine
Pro Series HD Gen2
Accessories
Delrin Sleeve
Delrin Isolation Sleeve
20
14
Underwater Lighting Excellence
When a weld-in underwater lighting fixture is not an option, use the Delrin Isolation
Sleeve to isolate the underwater light from the aluminum or steel hull.
Designed as an accessory to the Pro-Series Xchangeable Flush Mount underwater
light range.
Description
•4” (100mm) Hole in Hull for ProSeries 2010 Xchangeable Flush
Mount
•41/2” (114mm) Hole in Hull for ProSeries 3010 Xchangeable Flush
Mount
Part #
UPC/EAN #
Delrin Isolation Sleeve for 2010/COLOURS XFM
001-500573
5051803003649
Delrin Isolation Sleeve for 3010 XFM
001-500575
5051803003663
Delrin Isolation Sleeve also available for Pro Series HD Gen2 Thru-Hull and EYES Ocean Camera. See SPEC DELRIN THRUHULL.
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED SPEC DELRIN XFM / 112813 / v4.3
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
20
14
THIS PAGE INTENTIONALLY LEFT BLANK
OceanLED Marine
EYES Underwater Camera
Underwater
Camera
Underwater
20
14
EYES Ocean Camera
EYES Ocean Camera can be mounted anywhere allowing you to capture the
magic of your own underwater aquarium beneath your boat, increase security,
and provide evidence of your winning tournament catch. Standard VGA output
connects to any screen.
Suitable for Fiberglass, GRP and wooden hulls, and also suitable for aluminium/
steel hulls using the Delrin Isolation Sleeve accessory. Weld-in option also available
on special request.
Tritonium™ optical lens is scratch and sea growth resistant.
•13/8” Hole in Hull
•Standard VGA
•12V DC
•40,000+ Hour Life
•Aluminium Bronze AB2 Bezel
•Tritonium™ Optical Lens
•Plug & Play
•Factory Sealed Unit
•No Breakable Parts
Quick Specs
80K
HOURS
LIFE
SPAN
12V DC
0.01
82°
LUX @
F1.6-F2.4
FIELD
OF VIEW
768x494 752x582
Description
NTSC
PIXELS
PAL
PIXELS
520
3.6mm
TV LINES
LENS
Color
Underwater Camera - Bronze Bezel - NTSC
Underwater Camera - Bronze Bezel - PAL
Bronze Bezel
OceanLED SPEC EYES / 112813 / v4.3
<150mA Tritonium
POWER
OPTICAL
LENS
REVERSE
POLARITY
PROTECTION
Part #
UPC/EAN #
001-500101
5051803000518
001-500133
5051803000525
Mounting Recommendations
EYES
Maximum hull thickness
116mm (41/2”)
Technical
CCD Chip
1/3” ExviewHAD+ SS-HQ1
Minimum Illumination
0.01 LUX at F1.6 ~ F2.4
Typical LED life expectancy
80,000+ Hours
Minimum-Maximum operating voltage DC
9-14V DC
Current / Amp draw (DC)
12V DC 150mA
Effective Pixels - NTSC
768 (H) x 494 (v)
Effective Pixels - PAL
752 (H) x 582 (V)
H. Resolution
520 TV Lines
Video Output
1 Vp-p 75 ohm composite
S/N Ratio
Over 50dB
Electronic Iris (Auto)
1/50, 1/60 - 1/100,000 sec
Gain Control
Automatic 4dB~30dB
Lens
3.6mm
Field of View
82° - 90°
Operating Temperature
10°-50°C (14°-122°F)
Physical
135mm (55/16”)
Diameter of Bezel
65mm (21/2”)
20
14
Overall Length
Total weight
65g (2.3oz)
Extension cable length (standard)
10m (30’)
Hole cut-out for body
35mm (13/8”)
Material
Aluminium Hard Anodized Body; Aluminium Bronze AB2
Lens
Tritonium™ Optical Lens
Accessories
Part#
EYES Delrin Sleeve (for metal hull installs)
001-500339
Additional 10m (30’) Plug & Play Extension Cable
600-000045
12V DC Current Regulator
001-600064
DO NOT SCALE
IF IN DOUBT ASK
OceanLED Eyes Camera
Construction: Aluminum Bronze / 6082 Aluminum
Camera can be removed in situ with special tool
58 (2 9/32")
Contents include:
• 10 meter / 30’ foot extension cable
• VGA and power in plug-and-play harness
• Locking Kit
133.5 (5 1/4")
32 (1 1/4")
104mm (4") max hull thickness
GEOMETRIC CHARACTERISTIC SYMBOLS
STRAIGHTNESS
PROFILE
OF A
LINE
RUN
OUT
ANGULARITY
ROUNDNESS
CYLINDRICITY
PROFILE
OF A
SURFACE
PARALLELISM
SQUARENESS
POSITION
CONCENTRICTY
SYMMETRY
32
BASIC
DIMENSION
M
MAXIMUM
MATERIAL
CONDITION
A
DATUM
Ocean LED
TITLE
ALL DIMENSIONS ARE IN MILLIMETERS
© 2014 OceanLED LTD
All Rights Reserved
FLATNESS
TOLERANCES ON CASTINGS, UNMACHINED
PARTS AND FABRICATIONS, +/- 0.8
TOLERANCES ON MACHINED DIMENSIONS
+/- 0.25
WHOLE UNITS
+/- 0.1
ONE DEC. PLACE
TWO DEC. PLACE
+/- 0.05
ANGLES
+/- 0.5 DEG.
Specifications
are subject
to change
ALL UNSPECIFIED CHAMFERS
1 x 45
THIRD ANGLE
BREAK ALL SHARP EDGES 0.1 TO 0.5
withoutPROJECTION
notice.
Trademarks are the property of
OceanLED LTD
THIS DRAWING IS THE PROPERTY OF
Ocean LED LTD.
COPYRIGHT IS RESERVED BY THEM.
THE DRAWING IS ISSUED UNDER THE
CONDITION THAT IT MUST NOT BE USED
FOR ANY PURPOSE OTHER THAN WHICH
IT IS SUPPLIED AND NOT BE COPIED,
REPRODUCED, RETAINED OR
DISCLOSED TO UNAUTHORISED
PERSONS WHOLLY OR IN PART
WITHOUT THE CONSENT IN WRITING OF
Ocean LED LTD.
EYES CAMERA
Ltd.
OceanLED USA
OceanLED LTD
Unit 1 Jacknell Road
Dodwells Bridge Industrial
Estate
TBC
Hinckley,
sant
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
MATERIAL SPEC
FINISH
SAGE NO.
DRAWN
DATE
Tel. 02476 371700
21 Ptarmigan Place
Attleborough Fields Ind. Est.
Nuneaton
CV11 6RX
Fax. 02476 374840
2019
SW 20th Street
2 of 2
www.oceanled.com
Suite 101
A3
OL01107-24
1:1 Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
SHEET
DRAWING NUMBER
ISSUE
SCALE
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
OceanLED Marine
Pro Series HD Gen2
Accessories
Delrin Sleeve
Delrin Isolation Sleeve
20
14
Underwater Lighting Excellence
When a weld-in underwater lighting fixture is not an option, use the Delrin Isolation
Sleeve to isolate the underwater light or camera from the aluminum or steel hull.
Designed as an accessory to the Pro-Series Thru-Hull underwater light range and
Eyes underwater camera.
Description
•13/8” (34mm) Hole in Hull for ProSeries Thru-Hull models 2010,
3010 and Eyes camera
Part #
UPC/EAN #
Delrin Isolation Sleeve for 2010/COLOURS Thru-Hull
001-500164
5051803001102
Delrin Isolation Sleeve for 3010 Thru-Hull
001-500165
5051803001119
Delrin Isolation Sleeve for Eyes Underwater Camera
001-500339
5051803001881
Delrin Isolation Sleeve also available for Pro Series HD Gen2 XFM models. See SPEC DELRIN XFM.
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Trademarks are the property of
OceanLED LTD
OceanLED SPEC DELRIN THRU HULL / 112813 / v4.3
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com
20
14
THIS PAGE INTENTIONALLY LEFT BLANK
OceanLED Marine
Wireless Remote System
Accessories
Remote
Wireless Remote System
20
14
Underwater Lighting Excellence
New Wireless Remote System allows the skipper to turn on OceanLED’s full line of
underwater and above water lights from up to 1000 feet away; underwater, boarding,
spreader, aft, and cabin lights, as well as any other “On/Off” functions on the vessel. “All
Off”, “Auto Off”, “MOB”, and “SOS” are just a few of the features of the new system. The
safety, convenience and reliability factors it offers to the skipper are priceless whether
at the dock, cruising into your slip, or tendering up to your vessel at night, the Wireless
Remote System puts the lighting controls in your hands whether docked or underway.
This new and proven technology allows the boat owner to control virtually any DC or
AC marine system function on any size vessel equipped with 12/24 volts. The system
includes a fixed mount receiver and one or more IP68 waterproof seven-button remote
transmitters (FOB) with five programmable buttons that can be used to control any 12
or 24V DC or 120 or 250V AC volt powered system. The receiver known as the brains
of the system, receives the input message from the transmitter, processes the radio
frequency (RF) information and sends an electronic message to the specific vessel or
shore system to be activated.
Available in two models, Remote12 and Remote12/24. Remote12 is 12 volt, 15 amps
capable per output, designed for areas where space is limited and or vessel is equipped
with 12 volts. Remote 12/24 is capable of both 12/24 volts, 20 amps capable per output
and is targeted for larger vessels where space is not so limited and system voltage is
either 12 or 24 volts.
•Compatible with OceanLED’s
complete product line
•May be used to control any On/
Off electrical vessel or shore
system such as bilge blowers,
deck lighting, AC, stereo, water
systems, head, venting, and
more. (Contact OceanLED if interested
in controlling motor functions.)
•Increase safety and security with
Panic Mode, SOS, MOB features
•Transmission distance up to
1,000’/304 meters
•Waterproof IP68 FOB Remote
Transmitters
•IP67 Receiver
•12V DC and 12-24V DC Input
Quick Specs
12V DC
12V DC CR2032
IP68
IP67
BATTERY
TYPE
FOB
RATING
RECEIVER
RATING
24V DC
433MHz 250W
FM
TECHNOLOGY
PER
CHANNEL
ABOVE
ABOVE
ABOVE
BELOW
BELOW
BELOW
WATER
WATER
WATER
WATER
WATER
WATER
Description
Part #
UPC/EAN #
Remote12 Wireless Remote Control Kit (Includes 1 FOB)
001-600160
5051803004912
Remote12/24 Wireless Remote Control Kit (Includes 2 FOBs)
001-600161
5051803004929
OceanLED SPEC REMOTE / 112813 / v4.3
Remote System
Supply Voltage (Typical)
3V DC
Battery
CR2032
Battery Life
2-3 years
Back Lighting
Yes
Operating Frequency
433.92 MHz
Transmission distance with standard antenna
1,000’ / 304.8m
IP Rating
IP68 Waterproof
# of Receivers remote transmitters can be paired with
unlimited
Length
86mm
Width
54mm
Profile
22mm
Remote12 Receiver Specifications
001-600160
Supply Voltage (Typical)
10 – 16V DC
Operating Current per Output
15 amps
# of remote transmitters Receiver can be paired with
32
IP Rating
IP67
Remote Transmitters (FOBs) Included
1
Length (not including antenna)
6” (152.4mm)
Standard Antenna Length
16’ (4.87m)
Width
6” (152.4mm)
Profile
4” (101.6mm)
Weight
4.5lbs (2kgs)
Storage Temperature
Operating Temperature
-50°C - 85°C (-58°>185°F)
-20°C - 70°C (-4°>158°F)
Remote12/24 Receiver Specifications
001-600161
Supply Voltage (Typical)
18-30V DC
Operating Current per Output
20 amps
# of remote transmitters Receiver can be paired with
32
IP Rating
IP67
Remote Transmitters (FOBs) Included
2
Length (not including antenna)
8” (203.2mm)
Standard Antenna Length
16’ (4.87m)
Width
6” (152.4mm)
Profile
4” (101.6mm)
Weight
6.5lbs (3kgs)
Storage Temperature
-50°C - 85°C (-58°>185°F)
Operating Temperature
-20°C - 70°C (-4°>158°F)
Receiver specifications
•1 16 ft. external Antenna
•1 Transmitter lanyard
•1 Siren (used for Panic Function)
•Mounting and electrical hardware
•Installation and Care manuals
Additional built-in features:
Optional Manual Switch Control – As an
option, the user can override any FOB
(transmitter) controlled function with an
external switch box. Optional Switch Box
will certainly come in handy, when the
FOB is not readily available but wanting to
turn On/Off the remote functions. Contact
OceanLED for ordering.
All Off – The FOB (transmitter) has an “All
Off” function that will turn off all remotely
controlled systems with a single press of a
button. Great when leaving the vessel for
long periods and you want to turn all systems off, not having to worry what was left
on when you have already left the marina.
Feed Back – Mast, Navigation lights and
or a Piezo Beeper siren/horn for for visual
and audible confirmation that vessel has
received and processed the FOB (transmitter) Radio Frequency (RF) message.
© 2014 OceanLED LTD
All Rights Reserved
Specifications are subject to change
without notice.
Time Period – In the event that your Remote Control System is left unattended,
after 12 hours of not receiving a message,
the system will turn all Remote Functions
Off automatically.
SOS - The FOB has an “Emergency” button function that activates the SOS message from the vessels horn and or the siren
supplied with the Remote System. Great
system when docked or at sea when attention is required. When wired to the Navigation lights and Horn/Siren, the Nav. Lights
will flash the SOS message, while the horn
blasts “SOS”. Also great when staying on
board alone and you feel uneasy that an
uninvited guest is on deck, just scare him
away! Also can be used for Man (Child)
Overboard (MOB), whether at the dock or
underway, the FOB (transmitter) button is
pressed alarming the boats personnel that
someone has fallen overboard or is in need
of help. Not to worry about those troublesome inadvertent button actuations. The
Panic function has a 1.5 second delay on the
button activation time.
Cert approval Pending
Engineered and Manufactured in the USA
Trademarks are the property of
OceanLED LTD
Contents include:
•1 Receiver
•1 or 2 Remote Transmitters (FOBs) See
20
14
Transmitter (FOB) Specifications
OceanLED LTD
OceanLED USA
Unit 1 Jacknell Road
Dodwells Bridge Industrial Estate
Hinckley,
Leicestershire LE10 3BS
United Kingdom
Tel: +44 (0) 1455 637505
Fax: +44 (0) 1455 238553
sales@oceanled.com
2019 SW 20th Street
Suite 101
Fort Lauderdale, Florida
FL 33315
USA
Tel: +1 954.523.2250
Fax: +1 954.523.2249
sales@oceanledusa.com
LIGHT. YEARS AHEAD.
www.OceanLED.com
www.oceanled.com