Photochromatic Lens Activator PH-9000 Luxvision

Dear Users,
Thank you for your purchase of PH 9000 Photocromatic Activator. Please take time
to read our user’s manual carefully before use.
This guarantees you to make full use of this unit and prolongs the operation life of
this unit.
If you have detected abnormal heat, smoke, noise or smell, immediately stop using
the product.
In the event of an abnormality, turn off the power and disconnect the power plug from
the power socket. Continuing to use the product may result in electric shock or fire.
Observe the instructions given below regarding the power cable:
Be sure to use the supplied or specified power cable.
Do not modify, forcibly bend, kink or pull the power cable.
When disconnecting the power cable from the AC outlet, be sure to hold the cable
by the plug.
Pulling the cable may cause wire breakage or shot circuit, resulting in fire or electric
Do not connect or disconnect the plug of the power cable to/from the AC outlet
using wet hands.
Doing so may result in electric shock.
Do not touch the product with wet hands while the power cable is connected
to the AC outlet.
Doing so may result in electric shock.
If the product will not be used for a long period, disconnect the power cable
from the power source. Leaving the cable connected to the power socket for
a prolonged period will consume electricity and may result in heating.
1. Function Introduction
Welcome to use the tester, it best merit is that it can make colouring lenses to colour
in a moment, please specially note in order to prevent ultraviolet rays to hurt your eyes
you must close the protection cap while you operate it.
2. Name of Parts
Protection Cover
Power Supply
Flash Button
Left Flash Light
Right Flash Light
3. Operation
1. Open the power switch after connect to supply power, and you can use it
after 5 seconds.
2. Put the testing lenses onto the luster cup in the protection cap, then close
the protection cap and test the lenses.
3. The apparatus must be put smoothly, avoid to fall lest damage the instrument.
4. There is high voltage in the instrument and it is dangerous to open randomly,
please have specialized personnel if it is in trouble.
LUXVISION is not responsible or liable for indirect, special or consequential damages arising out of or in
connection with the use or performance of the product or damages with respect to any economic loss,
loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or
other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation
of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
Every effort has been made to ensure the accuracy of this manual. However, LUXVISION, makes no
warranties with respect to the documentation and disclaims any implied warranties of merchantability
and fitness for a particular purpose. LUXVISION, Inc. shall not be liable for any errors or for incidental or
consequential damages in connection with the furnishing, performance, or use of this manual or the examples
herein. The information in this document is subject to change without notice.