PRODUCT CATALOG
1
HOBO MX1101
Temperature Data Logger
Bluetooth Low Energy temperature
and relative humidity data logger
21
Research-grade Weather Station
NEW! The HOBO RX3000 is a research-grade data logging weather station that combines greater
measurement flexibility and an on-board LCD display in a rugged, easy-to-deploy package
4
Award-winning HOBO UX90 Series
The industry’s lowest-cost, most comprehensive
family of “time-of-use” data loggers
U26 Dissolved Oxygen Logger
32 HOBO
Affordable, high-performance dissolved oxygen
monitoring
2
HOBO MX1102 CO2
data logger
NEW! Bluetooth Low Energy
CO2, temperature and relative
humidity data logger
27
HOBO Pendant
Loggers
Low-cost data logging
solution for temperature,
light, and more
Visit us at onsetcomp.com to browse our full line of HOBO data
loggers, shop our online store, and download material from our
Data Logger Resources Library.
onsetcomp.com
29
NEW! HOBO MX2001
Bluetooth (BLE) Water
Level Logger
The industry’s first BLE water
level data logger designed for
convenient wireless setup and
download from mobile devices.
Product
Data Loggers / Indoor Environments
HOBO MX1101 Logger
HOBO MX1102 Logger
HOBO UX100 Loggers
HOBO UX90 Loggers
HOBO UX120 Plug Load Logger
HOBO UX120 4-Channel Analog Logger
HOBO UX120 4-Channel Thermocouple Logger
HOBO UX120 4-Channel Pulse Logger
HOBO U12 4-Channel Loggers
HOBO U12 Stainless Temp Loggers
HOBO U14 Loggers
Wireless Sensors / Indoor Environments
HOBO ZW Series Wireless Sensors
Data Logging Systems / Indoor Environments
HOBO RX3000 Remote Monitoring Systems
HOBO Energy Logger
Data Loggers / Weatherproof
HOBO Pro v2 Loggers
HOBO RG3 Rain Gauge
HOBO Pendant Event
HOBO Pendant G
HOBO U12 Outdoor Industrial
Measurements
Page
temperature, relative humidity, dew point
CO2, temperature, relative humidity, dew point
temperature, relative humidity, dew point
state, pulse, event, runtime, light on/off, motor on/off, occupancy/light
AC Current, AC Voltage, Amps, Kilowatt Hours, Power Factor, Volt-Amps, Volts, Watt Hours, Watts
temperature, 4-20mA, AC current, AC voltage, air velocity, carbon dioxide, compressed air flow,
DC current, DC voltage, gauge pressure, kilowatts, VOC
temperature
pulse signals, event, runtime, state, AC current, AC voltage, Amp hour, kilowatt hours, kilowatts,
motor on/off, power factor, volt-amps, watt hours, watts, volt-amp reactive, volt-Amp reactive hour
temperature, relative humidity, dew point, 4-20mA, AC current, AC voltage, air velocity,
carbon dioxide, compressed air flow, DC current, DC voltage, gauge pressure, kilowatts, VOC
temperature
temperature, relative humidity, dew point
1
2
3
4
5
6
air velocity, AC current, AC voltage, Amp hour, C02, compressed air flow, DC current, DC
voltage, differential pressure, gauge pressure, kilowatt hours, kilowatts, power factor, pulse
signals, temperature, relative humidity, dew point, VOC, volt-Amp reactive, volt-Amp
reactive hour, volt-Amps, water flow, watt hours, watts, volts, Amps, 0-10 VDC, 4-20mA
12
7
8
9
10
11
temperature, relative humidity, dew point, C02, air velocity, VOC, 4-20mA, AC current,
13
AC voltage, Amp hour, Amps, compressed air flow, DC current, DC voltage, differential, pressure,
gauge pressure, kW, kWh, power factor, pulse input, volt-Amp reactive, volt-Amp reactive hour,
volt-Amps, volts, water flow, watt hours, watts
temperature, relative humidity, dew point, 4-20mA, AC Current, AC voltage, air velocity, Amp hour, 14
carbon dioxide, compressed air flow, DC current, DC voltage, differential pressure, gauge pressure,
kilowatt hours, kilowatts, power factor, pulse input, VOC, volt-Amp reactive, volt-Amp reactive hour,
volt-Amps, water flow, watt hours, watts, wind
temperature, relative humidity, dew point
rainfall, temperature
temperature, event, rainfall
acceleration, tilt, motion
temperature, 4-20mA, 0-2.5 VDC (see HOBO U12 Industrial data logger (U12-008) at onsetcomp.com)
15
16
17
18
Data Logging Systems / Weatherproof
HOBO Weather Stations
HOBO RX3000 Weather Station
HOBO U30-NRC Weather Station
HOBO Micro Station
Data Loggers / Waterproof
TidbiT v2 Temp Logger
HOBO Water Temp Pro v2 Logger
HOBO Pendant Loggers
HOBO U12 Deep Ocean Temp Logger
HOBO Water Level Loggers
HOBO Conductivity Loggers
HOBO Dissolved Oxygen Logger
19-20
temperature, relative humidity, dew point, solar radiation, PAR, rainfall, wind speed, wind direction, 21-22
soil moisture, barometric pressure, leaf wetness, 4-20mA, voltage input, pulse input
barometric pressure, leaf wetness, light intensity, PAR, pulse input, rainfall , relative humidity, soil 23
moisture, solar radiation, temperature, wind speed & direction, 4-20mA, voltage input
temperature, relative humidity, dew point, wind speed, wind direction, rainfall, soil moisture, solar 24
radiation, PAR, barometric pressure, leaf wetness, 4-20mA, voltage input, pulse input, light intensity
temperature
temperature
temperature, light intensity, tilt, acceleration
temperature
water level, barometric pressure, pressure (absolute), differential pressure, temperature
conductivity, salinity, temperature
dissolved oxygen, temperature
25
26
27
28
29-32
33
34
Software
HOBOware / HOBOware Pro
HOBOmobile
HOBOnode Manager
HOBOlink
35
36
37
38
External Sensors
External Sensors by Measurement
39-42
Accessories & Communications
Accessories
Data Shuttles / Base Stations
43-44
45-46
onsetcomp.com
HOBO MX1101 Logger
Bluetooth Low Energy temperature and relative humidity data logger
Onset’s HOBO MX1101 is a Bluetooth® Low Energy (BLE)
data logger that measures and transmits temperature and
relative humidity data wirelessly to mobile devices via BLE
technology.
The self-contained wireless data logger, which works with
Onset’s free HOBOmobile® app for logger setup and data
management, enables users to access data anytime from
their mobile device over a 100-foot range. It communicates
instantly and enables you to “cut the cord” by requiring
no dedicated equipment beyond a mobile device for
configuring the logger or reading out data. This saves
considerable time and money.
Minimum System
Requirements:
Supported Measurements:
Temperature, Relative Humidity, Dew Point
Data Loggers / Indoor Environments
Key Advantages:
• Bluetooth Low Energy technology for use with mobile devices
• No internet access, cables, or computer required
• Download data any time from 100 ft. away
• Audible and visual alarms keep you notified of problems
• Easily share data and graph images for analysis
HOBOmobile
See pg 36
Mobile
device*
For complete information and accessories, please visit: www.onsetcomp.com
Part number
MX1101
Memory
Sampling Rate
Battery Life
Dimensions
Range
84,650 Measurements
1 second to 18 hours, user selectable
1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater, user replaceable, 2AAA
3.66 x 8.48 x 2.29 cm (1.44 x 3.34 x 0.9 in.)
Temperature
-20° to 70°C (-4° to 158°F)
Accuracy
±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
Resolution
0.024°C at 25°C (0.04°F at 77°F)
Response Time
7.30 minutes in air moving 1 m/s (2.2 mph)
Range
1% to 95%
Accuracy
±2% from 20% to 80% at 25°C (77°F)
Hysteresis
±2% RH
Resolution
0.01% at 25°C (77°F)
Response Time
20 seconds to 90% in air moving of 1 m/s (2.2 mph)
CE compliant
Yes
Mobile Device Compatibility
*iOS 8.3, 8.4 & 9.0, or Android 4.4, 5.0, 5.1 and Bluetooth 4.0 or later
Bluetooth Compatibility
Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart)
Relative Humidity
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
1
onsetcomp.com
HOBO MX1102 Logger
Bluetooth Low Energy CO2, temperature and relative humidity data logger
Onset’s HOBO MX1102 CO2 logger makes it more
convenient than ever to measure and record CO2 in
buildings and other non-condensing environments. It
measures CO2 from 0 – 5,000 parts per million (ppm) – and
our free HOBOmobile app allows you to access data right
from your mobile phone or tablet within a 100-foot range.
The MX1102 also features a USB port so it can be used
with a computer running HOBOware Pro graphing and
analysis software.
Supported Measurements:
CO2, Temperature, Relative Humidity, Dew Point
• Wireless communication via Bluetooth Low Energy technology
• Six-month battery life at 5-minute CO2 logging rate
• Easy to deploy and offload using free HOBOmobile App
• Visual and audible high & low alarm thresholds
• Self-calibrating CO2 sensor technology ensures optimal
accuracy at lower maintenance costs
HOBOmobile
See pg 36
Data Loggers / Indoor Environments
Minimum System
Requirements:
Key Advantages:
Mobile
device*
For complete information and accessories, please visit: www.onsetcomp.com
Part number
MX1102
Memory
Logging Rate
Range
84,650 Measurements
1 second to 18 hours
6 months, typical with logging and sampling intervals of 5 minutes or slower; 6 months or less with logging and
sampling intervals faster than 5 minutes while logging CO2, user replaceable, 4AA
7.62 x 12.95 x 4.78 cm (3.0 x 5.1 x 1.88 inches)
CO2
0 to 5,000 ppm
±50 ppm ±5% of reading at 25°C (77°F), less than 70% RH and 1,013 mbar
15 seconds
Auto or manual to 400 ppm
<1% of FS
Temperature
0° to 50°C (32° to 122°F)
Accuracy
±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
Resolution
0.024°C at 25°C (0.04°F at 77°F)
Response Time
12 minutes to 90% in airflow of 1 m/s (2.2 mph)
Range
Accuracy
Relative Humidity
1% to 70% RH when CO2 sensor is enabled (non-condensing)
1% to 90% RH when CO2 sensor is disabled (non-condensing)
±2% from 20% to 80% typical at 25°C (77°F)
Hysteresis
±2% RH
Resolution
0.01% at 25°C (77°F)
Drift
CE compliant
<1% per year typical
CO2: 1 minute to 90% in airflow of 1 m/s (2.2 mph), Temp: 12 minutes to 90% in airflow of 1 m/s (2.2 mph), RH:
1 minute to 90% in airflow of 1 m/s (2.2 mph)
Yes
Mobile Device Compatibility
*iOS 8.3, 8.4 & 9.0, or Android 4.4, 5.0, 5.1 and Bluetooth 4.0 or later
Bluetooth Compatibility
Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart)
Battery Life
Dimensions
Range
Accuracy
Warm-up Time
Calibration
Non-linearity
Response Time
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
onsetcomp.com
2
HOBO UX100 Loggers
Next-generation family of temperature and humidity data loggers
The HOBO UX100 Series is Onset’s next-generation family of data
loggers for tracking temperature and relative humidity in indoor
environments.
HOBO UX100 Series offer a dramatic price/performance advantage
over competitive products by delivering higher accuracy, larger
measurement capacity, and more LCD display features to make
environmental data collection faster and easier than ever. The
loggers provide a variety of features to reduce deployment time, and
offer new logging modes for recording and displaying more detailed
data without extensive post-processing or memory use.
Supported Measurements:
Temperature, Relative Humidity, Dew Point
Key Advantages:
Minimum System Requirements:
Data Loggers / Indoor Environments
• Large memory capacity
• Flexible mounting options
• Visual high & low alarm thresholds
• New Burst and Statistics logging modes
• User-replaceable RH sensors
• Temp, humidity, and thermocouple models available
Software
See pg 35
USB cable*
*USB cable included with software
part # BHW-PRO-CD
For complete information and accessories, please visit: www.onsetcomp.com
Part number
Memory
Sampling Rate
Battery Life
Dimensions
UX100-001
(Temp)
UX100-003*
(Temp/RH)
UX100-011*
(Temp/RH)
84,650 measurements
1 second to 18 hours, user-selectable
1 year typical with logging rate of 1 minute and sampling interval of 15 seconds or greater, user-replaceable, CR2032
3.66 x 5.94 x 1.52 cm
(1.44 x 2.34 x 0.6 in.)
Temperature
Range
Accuracy
Resolution
3.66 x 8.48 x 1.52 cm (1.44 x 3.34 x 0.6 in.)
-20° to 70°C (-4° to 158°F)
±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
0.024°C at 25°C (0.04°F at 77°F)
Response Time
8 minutes to 90%
(airflow of 1 m/s (2.2mph))
Relative Humidity
UX100-023*
(Ext Temp/RH)
4 minutes to 90%
6 minutes to 90%
Range
Accuracy
Resolution
Response Time
(airflow of 1 m/s (2.2mph))
CE compliant
n/a
n/a
n/a
15% to 95%
±3.5% from 25% to 85%
0.07% at 25°C (77°F)
n/a
43 seconds to 90%
Part number
UX100-014M (Thermocouple)
Memory
Sampling Rate
Battery Life
Dimensions
Operating Range
208,076 measurements
1 second to 18 hours, user-selectable
1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater, user-replaceable, CR2032
3.66 x 8.48 x 1.52 cm (1.44 x 3.34 x 0.6 in.)
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
(probes sold separately)
Type J
Type K
Type T
Type E
Type R
Type S
Type B
Type N
Range
Accuracy
Resolution
-210° to 760°C (-346° to 1,400°F)
-260° to 1,370°C (-436° to 2,498°F)
-260° to 400°C (-436° to 752°F)
-260° to 950°C (-436° to 1,742°F)
-50° to 1,550°C (-58° to 2,822°F)
-50° to 1,720°C (-58° to 3,128°F)
550° to 1,820°C (1,022° to 3,308°F)
-260° to 1,300°C (-436° to 2,372°F)
±0.6°C
±0.7°C
±0.6°C
±0.6°C
±2.2°C
±2.2°C
±2.5°C
±1.0°C
0.03°C (0.06°F)
0.04°C (0.07°F)
0.02°C (0.03°F)
0.03°C at (0.05°F)
0.08°C (0.15°F)
0.08°C (0.15°F)
0.1°C (0.18F)
0.06°C (0.11°F)
Thermocouple
1% to 95%
±2.5% from 10% to 90%
0.05% at 25°C (77°F)
11 seconds to 90%
Yes
(±1.08°F) ± thermocouple probe accuracy
(±1.26°F) ± thermocouple probe accuracy
(±1.08°F) ± thermocouple probe accuracy
(±1.08°F) ± thermocouple probe accuracy
(±3.96°F) ± thermocouple probe accuracy
(±3.96°F) ± thermocouple probe accuracy
(±4.5°F) ± thermocouple probe accuracy
(±1.8°F) ± thermocouple probe accuracy
*Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
3
5 minutes to 90%
onsetcomp.com
HOBO UX90 Loggers
Next-generation time-of-use loggers for fast, reliable monitoring
The award-winning HOBO UX90 Series is the industry’s lowest-cost,
most comprehensive family of “time-of-use” data loggers. The new
toolbox suite includes LCD-display data loggers for measuring motor
on/off status, electronic pulses, state changes, and occupancy and
light-use patterns.
Leveraging patent-pending technology, HOBO UX90 data loggers
streamline energy audits and make field deployment fast and
reliable.
Supported Measurements: State, Pulse, Event, Runtime, Light On/Off,
Motor On/Off, Occupancy/Light
Key Advantages:
Minimum System Requirements:
Data Loggers / Indoor Environments
• LCD displays Time On or % On, providing instant feedback
• Auto-calibration & signal strength indicator ensure proper deployment
• 84k or 346k measurement capacity enables longer deployments
• Rare-earth magnets, 3M Command™ Strips, or mounting tabs for
reliable mounting
• Flexible logger Start and Stop options
• HOBOware Pro allows for easy setup of hundreds of loggers
Software USB cable*
See pg 35
*USB cable included with software part # BHW-PRO-CD
For the most accurate readings, use of Light Pipe UX90LIGHT-PIPE-1 is recommended to eliminate the effects of
ambient light. See page 44 for more details.
For complete information and accessories, please visit: www.onsetcomp.com
Part number
Memory
Part number
UX90-001
(State)
UX90-002
(Light On/Off)
UX90-004
(Motor On/Off)
UX90-005
(Occupancy/Light)
UX90-006
(Occupancy/Light)
UX90-001/M
UX90-002M
UX90-004M
UX90-005M
UX90-006M
84,000 measurements
Memory
Maximum state,
event, runtime
frequency
Light threshold
Light type
AC magnetic field
threshold
Maximum sensor
detection range
External contact input
Maximum state,
event, runtime
frequency
Maximum Pulse
Frequency
Battery life
Operating range
Dimensions
CE compliant
346,000 measurements
INTERNAL SENSOR
1 Hz
--
--
65 lux
LED, CFL,
fluorescent, HID,
incandescent,
natural
--
65 lux
--
LED, CFL, fluorescent, HID, incandescent,
natural
--
--
> 40 mGauss at 60 Hz
--
--
--
--
--
5 m (15.4 ft)
12 m (39.4 ft)
---
--
--
EXTERNAL INPUT
solid state closure or
logic driven voltage
output
--
solid state closure
--
--
1 Hz
--
1 Hz
--
--
50 Hz
--
--
--
--
1 year typical, user replaceable, CR2032
-20º to 70ºC (-4º to 158ºF); 0-95% RH (non-condensing)
3.66 x 5.94 x 1.52 cm
3.66 x 8.48 x 1.52 cm
3.66 x 8.48 x 2.36 cm
(1.44 x 2.34 x 0.6 in)
(1.44 x 3.34 x 0.6 in)
(1.44 x 3.34 x 0.93 in)
Yes
onsetcomp.com
3.66 x 8.48 x 2.87 cm
(1.44 x 3.34 x 1.13 in)
4
HOBO UX120 Plug Load Logger
Measures power and energy consumption of 120V office equipment plug loads
Onset’s HOBO Plug Load Logger is a high-accuracy, easy-todeploy data logger that measures and records the power and
energy consumption of 120V plug loads from office equipment,
vending machines, and other devices.
The logger provides 0.5% measurement accuracy with a
measurement resolution of 1 watt, making it an ideal choice for
building audits where detailed energy use data is required. The
rugged housing is designed to withstand the rigors of real-world
handling, providing reliable performance despite bumps, drops,
and use under desks.
Supported Measurements: AC Current, AC Voltage, Amps,
Kilowatt Hours, Power Factor, Volt-Amps, Volts, Watt Hours,
Watts
Key Advantages:
Data Loggers / Indoor Environments
• 0.5% measurement accuracy enables more reliable plug load energy use data
• “Meter Mode” provides instant viewing of real-time plug load variables
• Large memory enables faster logging intervals for more comprehensive plug load profiles
• Battery back-up ensures logged data remains intact in the event of a power outage or load failure
• Full-featured LCD display provides visual diagnostics for easy deployment
• Factory calibrated (see user’s manual for details)
Minimum System Requirements:
Software USB cable*
See pg 35
For complete information and accessories, please visit: www.onsetcomp.com
Part number
UX120-018
RMS Voltage Accuracy,
RMS Current Accuracy,
Active Power Accuracy,
Power Factor Accuracy
0.5% up to 14 Amp continuous; up to 1.0% over 14 Amp when equipment being monitored is at 100% duty cycle
Power Factor Accuracy
Drift
Memory
Logging rate
Sampling rate
Battery life
Power source
±0.02
Up to 0.5% typical within 1 year
4 MB (1.4 million measurements, maximum)
1 second to 18 hours, 12 minutes, 15 seconds
60 Hz or 16.67 mS single-cycle
2 years with line power; 6 months battery only (no line power) with logging rate of 1 minute or greater operating at
25°C (77°F)
Line-powered with 0.92 m (3 ft) AC power cord or two AAA 1.5 V alkaline batteries, user replaceable
Resolution
Operating
temperature range
Dimensions
1 Watt Load at 120 V AC 15 Amp
CE Compliant
Yes
Logging: 5° to 40°C (41° to 104°F); 0 to 95% RH (non-condensing)
13.97 x 7.62 x 4.75 cm (5.5 x 3 x 1.87 in.)
*USB cable included with software part # BHW-PRO-CD
5
onsetcomp.com
HOBO UX120 4-Channel Analog Logger
Flexible, accurate, 4-channel analog logger
The HOBO UX120-006M Analog Logger is a high-performance,
LCD display data logger for building performance monitoring
applications. As Onset’s highest-accuracy data logger, it provides twice
the accuracy of previous models, a deployment-friendly LCD,
and flexible support up to four external sensors for measuring
temperature, current, CO2, voltage, and more.
Supported Measurements: Temperature, 4-20mA, AC Current,
AC Voltage, Air Velocity, Carbon Dioxide, Compressed Air Flow,
DC Current, DC Voltage, Gauge Pressure, Kilowatts, Volatile
Organic Compound
Key Advantages:
Data Loggers / Indoor Environments
• Twice the accuracy over previous models
• 16-bit resolution
• Flexible support for a wide range of external sensors
• LCD confirms logger operation and displays near real-time measurement data
• Provides minimum, maximum, average, and standard deviation logging options
• On-screen alarms notify you when a sensor reading exceeds set thresholds
• Stores 1.9 million measurements for longer deployments between offloads
Minimum System Requirements:
Software USB cable*
See pg 35
For complete information and accessories, please visit: www.onsetcomp.com
Part number
UX120-006M
Memory
Logging Rate
Logging Modes
Memory Modes
Time Accuracy
1.9 Million
1 second to 18 hours, user selectable
Normal, Burst, Statistics
Wrap when full or stop when full
±1 minute per month at 25°C (77°F)
Battery Life
1 year typical with logging rate of 1 minute and sampling interval of 15 seconds or greater, user replaceable, 2 AAA
Dimensions
Operating Range
Accuracy
CE Compliant
10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
±0.1 mV ±0.1% of reading
Yes
*USB cable included with software part # BHW-PRO-CD
onsetcomp.com
6
HOBO UX120 4-Channel Thermocouple Logger
Log type J, K, T, E, R, S, B, or N thermocouples
The HOBO UX120 Thermocouple Logger is a four-channel LCD
data logger for measuring and recording temperature in a range of
monitoring applications. The logger makes it easy and convenient
to record temperatures over a broad range (-260 to 1820° C) and
can accept up to four J, K, T, E, R, S, B, or N type probes.
In addition to accepting four thermocouple probes, the logger
features an internal temperature sensor for logging ambient
temperatures, further extending the application possibilities.
Supported Measurements: Temperature
Key Advantages:
Data Loggers / Indoor Environments
• Easy-to-view LCD display confirms logger operation and battery status
• Near real-time readout of current temperatures as well as minimum,
maximum, average, and standard deviation statistics
• On-screen alarms notify you if temperatures exceed high or low thresholds
• Large memory capacity capable of storing 1.6 million measurements
• Start, stop, and restart push buttons
• User-upgradeable firmware
Minimum System Requirements:
Software USB cable*
See pg 35
Note: for a single thermocouple input logger, please see page 3
For complete information and accessories, please visit: www.onsetcomp.com
Part number
UX120-014M
Logging Rate
Logging Modes
Memory Modes
Time Accuracy
Internal Temperature
-20° to 70°C (-4° to 158°F)
±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
0.024°C at 25°C (0.04°F at 77°F)
<0.1°C (0.18°F) per year
Logger
1 second to 18 hours
Normal, Burst, Statistics
Wrap when full or stop when full
±1 minute per month at 25°C (77°F)
Battery Life
1 year typical with logging rate of 1 minute and sampling interval of 15 seconds or greater, user replaceable, 2 AAA
Dimensions
Operating Range
CE Compliant
10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Yes
Thermocouple
Range
Accuracy
Resolution
-210° to 760°C (-346° to 1,400°F)
-260° to 1,370°C (-436° to 2,498°F)
-260° to 400°C (-436° to 752°F)
-260° to 950°C (-436° to 1,742°F)
-50° to 1,550°C (-58° to 2,822°F)
-50° to 1,720°C (-58° to 3,128°F)
+60° to 1,820°C (1,022° to 3,308°F)
-260° to 1,300°C (-436° to 2,372°F)
±0.6°C (±1.08°F) ± thermocouple probe accuracy
±0.7°C (±1.26°F) ± thermocouple probe accuracy
±0.6°C (±1.08°F) ± thermocouple probe accuracy
±0.6°C (±1.08°F) ± thermocouple probe accuracy
±2.2°C (±3.96°F) ± thermocouple probe accuracy
±2.2°C (±3.96°F) ± thermocouple probe accuracy
±2.5°C (±4.5°F) ± thermocouple probe accuracy
±1.0°C (±1.8°F) ± thermocouple probe accuracy
0.03°C (0.06°F)
0.04°C (0.07°F)
0.02°C (0.03°F)
0.03°C at (0.05°F)
0.08°C (0.15°F)
0.08°C (0.15°F)
0.1°C (0.18F)
0.06°C (0.11°F)
Range
Accuracy
Resolution
Drift
(probes sold separately)
Type J
Type K
Type T
Type E
Type R
Type S
Type B
Type N
*USB cable included with software part # BHW-PRO-CD
7
onsetcomp.com
HOBO UX120 4-Channel Pulse Logger
Log pulse signals, events, state changes, and runtimes
The HOBO UX120 4-Channel Pulse data logger is a highly
versatile, 4-channel energy data logger that combines the
functionality of four separate energy loggers into one compact
unit. It enables energy management professionals – from energy
auditors to building commissioners – to easily track building
energy consumption, equipment runtimes, and water and gas
flow rates.
Supported Measurements: Pulse Signals, Event, Runtime,
State, AC Current, AC Voltage, Amp Hour, Kilowatt Hours,
Kilowatts, Motor On/Off, Power Factor, Volt-Amps, Watt Hours,
Watts, Volt-Amp Reactive, Volt-Amp Reactive Hour (sensors sold
separately)
Key Advantages:
Data Loggers / Indoor Environments
• Simultaneously measures and records pulse signals, events, state changes, and runtimes
• Stores over 4 million measurements, enabling longer deployments with fewer site visits
• Streamlines deployment via range of start/stop options, logger status LEDs, and high-speed USB 2.0 data offload
• Works with Onset’s E50B2 Power & Energy Meter to measure Power Factor, Reactive Power, Watt Hours, and more
Minimum System Requirements:
Software USB cable*
See pg 35
Sensor
See pg 40
For complete information and accessories, please visit: www.onsetcomp.com
Part number
UX120-017
UX120-017M
Memory
Sampling rate
Battery life
External contact Input
Max pulse frequency
520,000 measurements
4,000,000 measurements
1 second to 18 hours
1 year typical, user replaceable, 2 AA
Electronic solid state switch closure or logic driven digital signals to 24V
120 Hz
Max state, event,
runtime frequency
1 Hz
Resolution
Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 state or event
Bits
4 - 32 bits depending on pulse rate and logging interval
Lockout time
Operating
temperature range
Dimensions
0 to 1 second in 100 ms steps
Logging: -40º to 70ºC (-40º to 158ºF); 0 to 95% RH (non-condensing)
11.4 x 6.3 x 3.3 cm (4.5 x 2.5 x 1.3 inches)
CE compliant
Yes
*USB cable included with software part # BHW-PRO-CD
onsetcomp.com
8
HOBO U12 4-Channel Loggers
Multi-channel energy & environmental monitoring
HOBO U12 data loggers provide flexibility for monitoring up to 4 channels of
energy and environmental data with a single, compact logger. They provide
12-bit resolution measurements for detecting greater variability in recorded
data, direct USB connectivity for convenient, fast data offload, and a 43K
measurement capacity.
Supported Measurements: Temperature, Relative Humidity, Dew Point,
4-20mA, AC Current, AC Voltage, Air Velocity, Carbon Dioxide, Compressed
Air Flow, DC Current, DC Voltage, Gauge Pressure, Kilowatts, Light
Intensity, Volatile Organic Compound (some sensors sold separately)
Key Advantages:
• Records up to 4 channels
• Your choice of 2 models, with flexible measurement options
• Programmable as well as push-button start
• Compatible with a broad range of external sensors
Data Loggers / Indoor Environments
Minimum System Requirements:
Software USB cable*
See pg 35
For complete information and accessories, please visit: www.onsetcomp.com
Part number
U12-0121
(Temp/RH/Light/Ext)
U12-0131
(Temp/RH/2 Ext)
Memory
Sampling rate
Battery life
43,000 measurements
1 second to 18 hours, user-selectable
1 year typical, user-replaceable, CR2032
Max range
Temperature
-20° to 70°C (-4° to 158°F)
Accuracy
± 0.35°C from 0° to 50°C (± 0.63°F from 32° to 122°F)
Resolution (12-bit)
0.03°C @ 25°C (0.05°F @ 77°F)
Relative Humidity
Measurement range
5% to 95% RH (non-condensing)
Accuracy
± 2.5% typical, 3.5% maximum, from 10 to 90% RH
Resolution (10-bit)
Range
0.03% RH
Light Intensity
Designed for general purpose indoor
measurement of relative light levels
1 to 3000 footcandles (lumens/ft2) typical
0-32,300 lumens/m2
External Input
Range
0 to 2.5 VDC
Accuracy
± 2 mV, ± 2.5% of absolute reading
Resolution
0.6 mV
CE compliant
Yes
*USB cable included with software part # BHW-PRO-CD
1
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
For USB data logging applications in harsh indoor environments, see the 4-channel HOBO U12 Industrial data logger (U12-008) at onsetcomp.com
9
onsetcomp.com
HOBO U12 Stainless Temp Loggers
High-accuracy temperature monitoring for challenging process conditions
HOBO U12 Stainless Temperature data loggers are
ideal for food, pharmaceutical, autoclave, and other
applications where high-accuracy temperature data is
critical. They can withstand process conditions from
pasteurization to flash freezing and washdown.
HOBO U12 Stainless
Temperature Logger
Supported Measurements: Temperature
Key Advantages:
• High-accuracy, extended temperature range
• Suitable for high pressure applications to 2200 psi
• Fast readout via direct USB interface
Data Loggers / Indoor Environments
HOBO U12 Stainless
Temperature Logger
with 5-inch Probe
Minimum System Requirements:
Software USB cable*
See pg 35
For complete information and accessories, please visit: www.onsetcomp.com
Part number
U12-015
Memory
Battery life
43,000 measurements
3 year typical, factory replaceable
Response time
10 minutes (to 90% in airflow of 1 m/s)
3.5 minutes (to 90% in water)
Operating range
Logging: -40° to 125°C (-40° to 257°F) Launch/readout: 0° to 50°C (32° to 122°F), per USB specification
Range
-40° to 125°C (-40° to 257°F)
Accuracy
± 0.25°C from 0° to 50°C
(± 0.45°F from 32° to 122°F)
Resolution
0.03°C at 25°C (0.05°F at 77°F)
Dimensions
17.5 x 101.6 mm (0.69 x 4.00 in)
CE compliant
U12-015-02
2.25 minutes (to 90% in airflow of 1 m/s)
20 seconds (to 90% in water)
Accuracy: ± 0.25°C from 0° to 50°C
(± 0.45°F from 32° to 122°F)
0.03°C at 25°C (0.05°F at 77°F)
Logger: 17.5 x 101.6 mm (0.69 x 4.00 in)
Probe: 4 x 124 mm (0.16 x 4.90 in)
Yes
*USB cable included with software part # BHW-PRO-CD
onsetcomp.com
10
HOBO U14 Loggers
Display, record, and get notified of temperature and humidity conditions
HOBO U14 data loggers display, record, and provide alarm
notifications of temperature and humidity conditions. Receive
out-of-range alarm notifications with the optional Auto Dialer, or
remote Audible Alarm. These loggers are well-suited for use in
manufacturing, processing, and storage environments where
reliable monitoring and documentation of specific temperature
and relative humidity conditions are critical.
Supported Measurements:
Temperature, Relative Humidity, Dew Point
Key Advantages:
Data Loggers / Indoor Environments
•
•
•
•
•
•
Real-time display of temperature and relative humidity
Alarm display and output ensure timely notification of out-of-range conditions
Optional Remote Alarm and Autodialer
Choice of two models: Internal Temp/Humidity or External Temp/Humidity sensors
Optional protective case for harsh or outdoor environments
Fast data offload via USB
Minimum System Requirements:
Software
See pg 35
Sensor*
See pg 39
USB cable1
For complete information and accessories, please visit: www.onsetcomp.com
Part number
U14-0012 (Temp/RH)
Memory
Sample rate
Battery life
Range
43,000 measurements
1 second to 18 hours, recording times up to 1 year
1 year typical, user-replaceable, 3 AAA alkaline
Temp -20°C to 50°C (-4°F to 122°F)
Accuracy
Temp ± 0.2°C from 0° to 50°C (± 0.36°F from 32° to 122°F) - RH ± 2.5% from 10 to 90%
Resolution
0.03° at 25°C (0.05° at 77°F)
Data channels
0
2
Measurement range
5% to 95% RH (non-condensing)
± 3.5% RH from 25% to 95% over range of
5° to 55°C (41° to 131°F)
Internal temp sensor
• 15 min (to 90% in airflow of 1 m/sec)
External temp Sensor
• 5 min in airflow of 1 m/sec
Internal RH sensor
• 2 min (to 90% in airflow of 1 m/sec)
External RH Sensor
• 5 min in airflow of 1 m/sec with protective cap
Accuracy
Response time
Dimensions
CE compliant
U14-0022 (Ext Temp/RH)*
125 x 92 x 31 mm (4.9 x 3.6 x 1.2 in)
Yes
*Sensor required for U14-002 only
1
USB cable included with software part # BHW-PRO-CD
2
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
11
onsetcomp.com
HOBO ZW Series Wireless Sensors
Monitor and transmit real-time building performance data… wirelessly!
HOBO ZW Series wireless data nodes provide
centralized monitoring of energy and environmental
conditions in buildings.
Supported Measurements: Air Velocity, AC Current,
AC Voltage, Amp Hour, C02, Compressed Air Flow,
DC Current, DC Voltage, Differential Pressure, Gauge
Pressure, Kilowatt Hours, Kilowatts, Power Factor,
Pulse Signals, Temperature, Relative Humidity, Dew
Point, Volatile Organic Compound, Volt-Amp Reactive,
Volt-Amp Reactive Hour, Volt-Amps, Water Flow, Watt
Hours, Watts, Volts, Amps, 0-10 VDC, 4-20mA
Key Advantages:
Provides real-time centralized data collection within a facility
Scales up to a network of 100 nodes sending data to a single receiver
Creates self-healing network to overcome obstructions in communication paths
Provides one year battery life @ 15-minute logging intervals
Provides alarm notifications via email or text messages
Features powerful software for organizing and viewing data as well as the
wireless network
Minimum System Requirements:
Software
(included)
Receiver
Wireless Sensors / Indoor Environments
•
•
•
•
•
•
monitor not included
Data node
For complete information and accessories, please visit: www.onsetcomp.com
Part number
Buffer memory
Measurements
ZW-RCVR
(Receiver)
ZW-001
(Data node)
ZW-003*
(Data node)
up to 95k
measurements
5k
measurements
4k
measurements
N/A
Probe size
N/A
Sample rate
N/A
Transmission rate N/A
AC adapter,
Power options
Battery Backup,
(included)
USB power
ZW-007*
(Data node)
ZW-008
(Data node)
ZW-ROUTER
N/A
2 analog ports
4 external
Ext T/RH, 2
2 pulse input
analog ports
analog ports
ports
N/A
1cm (0.38 in) dia. N/A
1 min to 18 hrs 1 min to 18 hrs
1 min to 18 hrs
N/A
2 min & greater 2 min & greater
N/A
N/A
N/A
N/A
AC Power Adapter, Battery Backup
N/A
Temp:
-40° to 70°C
(-40° to 158°F)
N/A
Temp: ± 0.21°C
from 0° to 50°C
(± 0.38°F from
32° to 122°F)
Temp: ± 0.21°C
from 0° to 50°C
(± 0.38°F from
32° to 122°F)
RH: ± 2.5%
Resolution
N/A
Temp: 0.02°C
@ 25°C (0.04°F
@ 77°F)
Temp: 0.02°C
@ 25°C
(0.04°F @77°F)
RH: 0.03%
Range
Approx. 100 m (300 ft.) depending on obstructions
Dimensions
96.5 x 108 x 28 mm (3.8 x 4.25x 1.1 in)
CE compliant
Yes
Accuracy
ZW-006
(Data node)
3k measurements
Ext T/RH, 1
Temp
Temp/RH
analog port
1 pulse input port
N/A
N/A
1cm (0.38 in) dia.
1 min to 18 hrs 1 min to 18 hrs 1 min to 18 hrs
2 min & greater 2 min & greater 2 min & greater
Temp: -40° to
70°C
(-40° to 158°F)
RH: 5 to 95%
RH
Measurement
range
ZW-005*
(Data node)
Temp: -40° to 70°C
(-40° to 158°F)
RH: 5 to 95% RH
Analog: o to 2.5
VDC Pulse: 0 to
65,535 pulses per
logging interval
Temp: ± 0.21°C
from 0° to 50° C
(± 0.38°F from
32° to 122°F)
RH: ± 2.5%
Analog: ± 1.544
mV + 2%
Temp: 0.02°C @
25° C (0.04°F
@77° F)
RH: 0.03%
Analog channel:
0.6 mV
Pulse Channel:
1 pulse
or interference
Analog
channels: 0 to
2.5 VDC; 0 to
5 VDC
Temp:
Analog channels:
-40° to 70°C
0 to 2.5 VDC; 0
N/A
(-40° to 158°F)
RH: 5 to 95% RH to 5 VDC
Temp: ± 0.21°C
from 0° to 50°C
Analog: ±1.544 (± 0.38°F from
mV plus 2% of 32° to 122°F)
reading
RH: ± 2.5%
Analog: ± 1.544
mV + 2%
Analog
channel:
0.6 mV
Temp: 0.02°C @
25°C
(0.04°F @77°F)
RH: 0.03%
Analog channel:
0.6 mV
Analog:
± 1.544 mV plus
2% of reading
N/A
Analog channel:
0.6 mV
Pulse Channel:
1 pulse
N/A
*Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
onsetcomp.com
12
NEW! HOBO RX3000 Remote Monitoring System
Real-time access to data from any web browser
The HOBO RX3000 is a research-grade data logging station that combines
greater measurement flexibility and an on-board LCD display in a rugged, easyto-deploy package.
Supported Measurements:
Indoor Environmental: Temperature, Relative Humidity, Dew Point, C02, Air
Velocity, VOC
Energy/Power: 4-20mA, AC Current, AC Voltage, Amp Hour, Amps, Compressed
Air Flow, DC Current, DC Voltage, Differential, Pressure, Gauge Pressure, kW,
kWh, Power Factor, Pulse Input, Volt-Amp Reactive, Volt-Amp Reactive Hour,
Volt-Amps, Volts, Water Flow, Watt Hours, Watts
Key Advantages:
Data Logging Systems / Indoor Environments
•
•
•
•
•
•
Minimum System Requirements:
Cloud-based data access
Plug-and-play operation
Flexible support for a broad range of sensors
LCD display for easy field deployment
Alarm notifications via text, email
Rugged double-weatherproof enclosure
Software Data plan*
See pg 35 See pg 38
Power
source1
Sensor
See pg 39
For complete information and accessories, please visit: www.onsetcomp.com
Part number
RX3001-00-01 (ETH)
RX3002-00-01 (WiFi)
RX3003-00-01 (3G)
Smart Sensor Connectors
10 (up to 15 data channels; some sensors use more than one data channel)
Maximum Number of Sensors
18 (when 2 Analog Modules are configured in the station)
Smart Sensor Cable Length
100 m (328 ft) maximum
Module Slots
2 (for optional Analog or Relay module; see manual for detailed module specification)
Fastest Logging Rate
1 second
1 second
1 minute
Memory
32 MB, 2 million measurements
Alarm notification latency
Logging interval plus 2-4 minutes, typical
Environmental Rating
Weatherproof enclosure, NEMA 4X
Operating Range
-40° to 60°C (-40° to 140°F)
Power
Onset solar panel, AC charger or user-provided external power supply is required
Battery Life
Typical 3-5 years; 4 Volt, 10 AHr, rechargeable sealed lead-acid
Size
18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.)
Weight
2.2 kg (4.85 lb)
Communications
RJ45/100BaseT
IEEE 802.11 b/g/n
CE Compliant
GSM/GPRS/EDGE: Quad
band 850/900/1800/1900 MHz,
UMTS/HSPA+: Five band
800/850/900/1900/2100 MHz
Yes
*Requires paid data plan
1
AC power adapter or solar panel required. See page 44. For more details, please visit onsetcomp.com, or call us at 1-800-564-4377.
13
onsetcomp.com
HOBO Energy Logger
Multi-channel energy data logging system
The HOBO Energy Logger multi-channel data logger is a
modular, reconfigurable data logging system for energy and
industrial monitoring applications.
The 15-channel system enables energy and facility
management professionals to quickly and easily solve a
broad range of monitoring applications without having to
purchase a toolbox full of data loggers.
Supported Measurements: Temperature, Relative Humidity, Dew Point, 4-20mA, AC Current, AC Voltage, Air
Velocity, Amp Hour, Carbon Dioxide, Compressed Air Flow, DC Current, DC Voltage, Differential Pressure, Gauge
Pressure, Kilowatt Hours, Kilowatts, Power Factor, Pulse Input, Volatile Organic Compound, Volt-Amp Reactive,
Volt-Amp Reactive Hour, Volt-Amps, Water Flow, Watt Hours, Watts, Wind
Key Advantages:
•
•
•
•
Records up to 15 channels
Provides 12v excitation for third-party sensors
Pre-configured Smart Sensors for fast setup
Signal conditioning modules retain configurations until you change them,
providing plug-and-play convenience for commonly used sensors
• Flexible power options include battery operation or AC power adapter
• Works with Onset’s E50B2 Power & Energy Meter to measure Power
Factor, Reactive Power, Watt Hours, and more
Software
See pg 35
Interface
Cable*
Data Logging Systems / Indoor Environments
Minimum System Requirements:
Sensor
See pg 39
For complete information and accessories, please visit: www.onsetcomp.com
Part number
H22-001
Memory
512K nonvolatile flash data storage
Operating Range
-20° to 50°C (-4° to 122°F) with alkaline batteries
-40° to 60°C (-40° to 140°F) with lithium batteries
Sensor Inputs
6 RJ-12 Smart Sensor jacks plus 3 FlexSmart module slots
Communication
RS-232 via 3.5 mm serial port*
Logging Interval
1 second to 18 hours, user-specified interval
Sensor Excitation
12 V DC at 200 mA total, with user-programmable warm up time on a per-channel basis
Battery Life
1 year typical
Battery Type
8 standard AA alkaline batteries (included)
External Power
Supports optional 13.6 V DC regulated AC Wall Adapter Connector
Time Accuracy
0 to 2 seconds for the first data point and ± 5 seconds per week at 25°C (77°F)
Dimensions
15.6 cm x 8.4 cm x 4.6 cm (6.13 in x 3.31 in x 1.81 in)
CE Compliant
Yes
*USB to Serial interface cable, part #CABLE-PC-3.5, see page 43
onsetcomp.com
14
HOBO Pro v2 Loggers
Weatherproof loggers for outdoor temperature and humidity measurements
HOBO Pro v2 data loggers are weatherproof loggers
that provide high-accuracy temperature and relative
humidity measurements in a wide range of outdoor
environments.
Supported Measurements:
Temperature, Relative Humidity, Dew Point
Key Advantages:
• Weatherproof housing for use in outdoor or condensing
environments
• High-accuracy measurements
• Replaceable RH sensor provides superior recovery from
condensing conditions
• Small-diameter, external sensor versions for measurements in tight spaces
• Optic USB interface for fast and reliable download
Data Loggers / Weatherproof
Minimum System Requirements:
Software Base Station* Coupler1
See pg 35 See pg 45
For complete information and accessories, please visit: www.onsetcomp.com
Part number
Memory
Sampling rate
Battery life
U23-0012
(Internal Temp/RH)
U23-0022
(External Temp/RH)
U23-003
(2x External Temp)
Measurement range
42,000 measurements
1 second to 18 hours, fixed rate or multiple logging intervals
3 years typical, user-replaceable,1/2 AA lithium
Internal Temperature
-40° to 70°C (-40° to 158°F)
Accuracy
± 0.21°C over 0° to 50°C (± 0.38°F over 32° to 122°F)
Resolution (12-bit)
± 0.02°@ 25°C (± 0.04°@ 77°F)
Stability (drift)
< 0.1°C (0.18°F) per year
U23-004
(Temp/External Temp)
Relative Humidity (U23-001 & U23-002 only)
Measurement range
0 to 100% RH, -40° to 70°C (-40° to 158°F)
Accuracy
± 2.5% from 10% to 90% RH (typical), to a maximum of ± 3.5% including hysteresis
Resolution (12-bit)
0.03%
Measurement Range
Accuracy
External Temperature
U23-002: -40° to 70°C (-40° to 158°F), U23-003 & U23-004: -40° to 100°C (-40° to 212°F) with
sensor tip and cable immersion in fresh water up to 50°C (122°F) for one year
± 0.21°C from 0° to 50°C (± 0.36°F from 32° to 122°F)
Resolution
0.02°@ 25°C (0.04°@ 77°F)
Dimensions
Housing measures 10.2 × 3.8 cm (4.0 × 1.5 in.)
CE compliant
Yes
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
1
Coupler included with HOBO Base Station or HOBO Waterproof Shuttle.
2
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
15
onsetcomp.com
HOBO RG3 Rain Gauge
Rainfall data logging system
The HOBO RG3 data logging rain gauge is a selfcontained device that includes an integrated data logger
with a high-quality tipping-bucket rain gauge. The RG3’s
logger has a built-in temperature sensor and is on a cable
so it can be used in an optional radiation shield for logging
air temperature.
Supported Measurements: Rainfall, Temperature
Key Advantages:
Data Loggers / Weatherproof
• Aluminum housing and 15.4 cm (6.06 in) collector ring
• Field-proven design
• Logger can be moved into an optional radiation shield for
logging air temperature
• Three mounting feet to use on flat, level surfaces
• Side bracket for mast mounting (hose clamps included)
• Self-emptying for continuous rainfall logging
Minimum System Requirements:
Software Base Station*
See pg 35 See pg 46
For complete information and accessories, please visit: www.onsetcomp.com
Part numbers
RG3-M, RG3
Memory
Events only: 16K to 23K events
Events and temperature: 25K to 30K data points
Measurement range
Resolution
Time stamp resolution
Up to 320 cm (RG3-M), up to 160 in (RG3)
0.2 mm (RG3-M), 0.01 in (RG3)
1 second
Maximum Rainfall rate
12.7 cm (5 in) per hour
Battery life
1 year typical, user-replaceable, CR2032
Temperature
Measurement range
Resolution
-20° to 70°C (-4° to 158°F)
± 0.53°C from 0° to 50°C (± 0.95°F from 32° to 122°F);
a solar radiation shield is required for temperature measurements in sunlight
0.14°C at 25°C (0.25°F at 77°F)
Sample rate
1 second to 18 hours, user-selectable
Dimensions
15.2 cm diameter x 25.7 cm high (6 x 10 in) 1.2 kg (2.5 lbs)
CE compliant
Yes
Accuracy
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
onsetcomp.com
16
HOBO Pendant ® Event
Measures temperature, events and rainfall
The HOBO Pendant Event data logger is ideal for rainfall logging and
connects to most standard tipping-bucket rain gauges to determine rainfall
rates, times, and duration.
Supported Measurements: Temperature, Event, Rainfall
Key Advantages:
•
•
•
•
Records tips or momentary contact closures and temperature
Event-based data storage provides detailed data and efficient memory usage
Stores over 16,000 tips (160 inches of rainfall with a 0.01-inch rain gauge)
Includes scaling to inches, millimeters, or other units
Minimum System Requirements:
Data Loggers / Weatherproof
Software Base Station*
See pg 35 See pg 46
For complete information and accessories, please visit: www.onsetcomp.com
Part number
UA-003-64
External Event type:
Events only: 16K to 23K events
Events and temperature: 25K to 30K data points
1 year typical, user-replaceable CR2032
Rain Gauge Tips
Relay contact closure or rain gauge “tips”
Connection
2 m (6 ft) cable with 2-wire input
Maximum input
frequency
1 Hz (1 pulse per second)
Memory
Battery life
Temperature
Measurement range
Resolution
-20° to 70°C (-4° to 158°F)
± 0.53°C from 0° to 50°C (± 0.95°F from 32° to 122°F);
a solar radiation shield is required for temperature measurements in sunlight
0.14°C at 25°C (0.25°F at 77°F)
Response time
Airflow of 2 m/s (4.4 mph): 10 minutes, typical to 90%
Sample rate
1 second to 18 hours, user-selectable
Dimensions
7.1 x 3.3 x 2.3 cm (2.8 x 1.3 x 0.9 in) Cable 1.8 m (6 ft)
CE compliant
Yes
Accuracy
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
17
onsetcomp.com
HOBO Pendant ® G
Measures acceleration, tilt, and motion
Measure 3-dimensional motion, such as sports activity or medical therapy
compliance with the HOBO Pendant G data logger. With this logger, users
can measure acceleration and angular displacement in 1, 2 or 3 axes. Use
this data to monitor activity and improve performance.
Supported Measurements: Acceleration, Tilt, Motion
Key Advantages:
• Low-cost acceleration and tilt measurement
• Waterproof housing for wet or underwater use
• Data readout in less than 30 seconds via fast Optic USB interface
Data Loggers / Weatherproof
Minimum System Requirements:
Software Base Station*
See pg 35 See pg 46
For complete information and accessories, please visit: www.onsetcomp.com
Part number
UA-004-64
Memory
Battery life
Resolution
Water depth rating
Dimensions
64K bytes (approximately 21.8K combined x-, y-, and z-axis readings or events)
1 year typical, user-replaceable, CR2032
0.025 g; 0.245 m/s² (0.8 ft/s²)
1 second to 18 hours, 12minutes, 15 seconds in Normal mode
0.01 seconds (100 Hz) to 0.99 seconds (1.01 Hz) in Fast mode
±1 minute per month at 25°C (77°F)
In water/ice: -20° to 50°C (-4° to 122°F)
In air: -20° to 70°C (-4° to 158°F)
30 m from -20° to 20°C (100 ft from -4° to 68°F)
5.8 x 3.3 x 2.3 cm (2.3 x 1.3 x 0.9 in)
CE compliant
Yes
Logging interval
Time accuracy
Operating range
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
onsetcomp.com
18
HOBO Weather Stations
Research-grade weather monitoring with plug-and-play convenience
HOBO Weather Stations save you time and money by offering
plug-and-play convenience and research-grade performance.
Data Logging Systems / Weatherproof
NEW! HOBO RX3000
HOBO U30-NRC
HOBO H21-002
•
•
•
•
•
•
•
•
•
•
•
•
•
10 Smart Sensor inputs
Cloud-based data access
Supports broad range of sensors
LCD display
Optional analog sensor & relay
modules
5 or 10 Smart Sensor inputs
Optional analog sensor port
Built-in relay
Supports broad range of sensors
Lean more on page 23
4 Smart Sensor inputs
Compact, low-cost
Improved weatherproof enclosure
Supports broad range of sensors
Lean more on page 24
Lean more on page 21-22
2 Meter Tripod
M-TPB
• Height range: 1.72 to 2.13 m (5.6 to 7 ft)
• Mast diameter: 4.1 cm (1.63 in)
• Weight: 5.8 kg (12.8 lbs)
M-GKA Grounding Kit is recommended when
using tripods in exposed locations.
2 Meter Tripod Kit also available M-TPB-KIT
3 Meter Tripod Kit
M-TPA-KIT
3-meter tripod (M-TPA) •
1/2-in Stake Kit (M-SKA) for guy wires •
Grounding Kit (M-GKA) •
Guy Wire Kit (M-GWA) •
Mast Level (M-MLA) •
3 Meter Tripod
M-TPA (shown at right)
• Height range: 2.74 to 3.20 m (9 to 10.5 ft)
• Mast diameter: 4.1 cm (1.63 in)
• Weight: 12.7 kg (28 lbs)
• Maximum slope: 13 degrees for installation on
moderately uneven ground
M-GKA Grounding Kit is recommended when
using tripods in exposed locations.
19
onsetcomp.com
HOBO Weather Stations
Wind Speed
Wind Direction
Light
Sensor
Light Sensor
Bracket
Light Sensor Bracket
M-LBB
Includes leveling screws
and u-bolts for mast mounting.
Full Cross Arm
Solar Radiation Shield
RS3
Pre-assembled
for S-THBs, S-TMBs,
includes clamp for
mast mounting.
Solar Radiation Shield
Solar Panel
Full Cross Arm
M-CAA
91.5 cm (36 in)
For use with Onset tripods or masts, the full cross
arm assures unobstructed wind measurement.
Data Logging Systems / Weatherproof
Rain Gauge
HOBO
RX3000 / U30 / H21
Barometric Pressure
NDVI Light Sensor Bracket
M-NDVI
Used to mount 2 PAR sensors and
2 solar radiation sensors for making
NDVI measurements. Also requires
M-LBB light sensor bracket.
Light Sensor Level
M-LLA
Purchase one for use on any number
of light sensors.
3 Meter Tripod
with Mast
Smart Sensor Extension Cables
S-EXT-M0xx
2 m, 5 m, 10 m, 25 m
(16 ft, 33 ft, 82 ft)
cable lengths available. Use individually or
connected together to optimize sensor
placement. A weatherproof housing is
required for outdoor connections
(Part# S-EXT-CASE2).
Network cable length limited to
100 meters per data logger.
onsetcomp.com
20
NEW! HOBO RX3000 Remote Weather Station
Research-grade weather monitoring with plug-and-play convenience
The HOBO RX3000 is a research-grade data logging weather
station that combines greater measurement flexibility and an
on-board LCD display in a rugged, easy-to-deploy package.
Key Advantages:
•
•
•
•
•
•
Cloud-based data access
Plug-and-play operation
Flexible support for a broad range of sensors
LCD display for easy field deployment
Alarm notifications via text, email
Rugged double-weatherproof enclosure
Data Logging Systems / Weatherproof
Supported Measurements: Temperature, Relative Humidity,
Dew Point, Solar Radiation, PAR, Rainfall, Wind Speed, Wind
Direction, Soil Moisture, Barometric Pressure, Leaf Wetness,
4-20mA, Voltage Input, Pulse Input
Minimum System Requirements:
Software Data plan*
See pg 35
Power
source1
Sensor
See pg 39
Confirm signal strength
at the site
Deployment Friendly
Receive immediate
notification of sensor or
system problems
On-board LCD display helps you confirm
system operation, sensor connections,
cellular signal strength and other parameters
before leaving the deployment site.
Connect with HOBOlink
to upload configuration
changes and latest
readings
Wide range of measurements
The measurement possibilities are nearly endless
with the RX3000 Station. You can configure up to
15 channels of plug-and-play Smart Sensors, and
add modules for up to 8 analog sensors.
And, the station can power external sensors
requiring 12-volt excitation power, extending the
range of possible measurements.
*Requires paid data plan
21
onsetcomp.com
HOBO RX3000 Remote Weather Station
Strong fasteners
ensure tight seal
Gore™ vent keeps
excess moisture out
Reliable, field-proven performance
The HOBO RX3000 features a field-proven,
double-weatherproof enclosure designed for longterm use – even in the harshest environments.
Critical system electronics are sealed in the unit’s
secondary enclosure, and weathertight sensor
cable seal keeps moisture out.
Tamper-resistant
padlock loops
Strong Polycarbonate
PBT-blend housing
Data Logging Systems / Weatherproof
HT-820 high-grade, UV & high
temp resistant silicone gasket
Convenient plug-and-play operation
Simply plug in a Smart Sensor and the RX3000
Station will recognize it and begin taking
measurements. No need for programming or
complicated wiring!
Part number
RX3001-00-01 (ETH)
RX3002-00-01 (WiFi)
RX3003-00-01 (3G)
Smart Sensor Connectors
10 (up to 15 data channels; some sensors use more than one data channel)
Maximum Number of Sensors
18 (when 2 Analog Modules are configured in the station)
Smart Sensor Cable Length
100 m (328 ft) maximum
Module Slots
2 (for optional Analog or Relay module; see manual for detailed module specification)
Fastest Logging Rate
1 second
1 second
1 minute
Memory
32 MB, 2 million measurements
Alarm notification latency
Logging interval plus 2-4 minutes, typical
Environmental Rating
Weatherproof enclosure, NEMA 4X
Operating Range
-40° to 60°C (-40° to 140°F)
Power
Onset solar panel, AC charger or user-provided external power supply is required
Battery Life
Typical 3-5 years; 4 Volt, 10 AHr, rechargeable sealed lead-acid
Size
18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.)
Weight
2.2 kg (4.85 lb)
Communications
RJ45/100BaseT
IEEE 802.11 b/g/n
CE Compliant
1
GSM/GPRS/EDGE: Quad
band 850/900/1800/1900 MHz,
UMTS/HSPA+: Five band
800/850/900/1900/2100 MHz
Yes
AC power adapter or solar panel required. See page 44. For more details, please visit onsetcomp.com, or call us at 1-800-564-4377.
onsetcomp.com
22
HOBO U30-NRC Weather Station
Research-grade data logging weather station
This rugged weather station is one of Onset’s most durable
outdoor environmental monitoring solutions. Users can
easily configure the HOBO U30-NRC Weather Station to
fit their application needs. Use up to 15 channels to collect
environmental data and then upload to HOBOware Pro software
for expert analysis.
Supported Measurements: Barometric Pressure, Leaf Wetness,
Light Intensity, PAR, Pulse Input, Rainfall , Relative Humidity, Soil
Moisture, Solar Radiation, Temperature, Wind Speed & Direction,
4-20mA, Voltage Input
Key Advantages:
Data Logging Systems / Weatherproof
•
•
•
•
•
Rugged double-weatherproof, tamper-proof enclosure
Setup is quick and easy with plug-and-play sensors
Fast data offload via USB
Optional analog inputs with sensor excitation
Includes relay that can be activated on user-defined alarm conditions
Minimum System Requirements:
Software
See pg 35
Power
source1
Sensor
See pg 39
For complete information and accessories, please visit: www.onsetcomp.com
Part number
23
U30-NRC
Smart-Sensor Inputs
5 or 10
Data Channels
Maximum of 15 (some sensors use more than one data channel)
Smart Sensor Cable Length
100m (323ft) maximum
Alarm Relay
Can be activated, deactivated or pulsed on user-defined sensor alarms.
Logging Interval
1 minute to 18 hours, user-specified
Data Storage Memory
512K bytes local storage in non-volatile flash memory
Environmental Rating
Weatherproof enclosure, NEMA 4x
Operating Range
-40 to 60ºC (-40 to 140ºF) see battery life
Power
An Onset solar panel (3w, or 6w) or AC adapter is required
Battery Life
3-5 years, 4 volt 10 AHr rechargeable sealed lead acid
Dimensions
17.8 x 11.7 x 19.3 cm (7.0 x 4.6 x 7.6 in)
Weight
2kg (4lbs 10oz)
Local Communication
USB
CE Compliant
Yes
onsetcomp.com
HOBO Micro Station
4-channel weatherproof station for monitoring outdoor environmental conditions
The HOBO Micro Station offers reliable monitoring performance
at industry-leading prices. Designed for stand-alone data
logging applications, the 4-channel HOBO Micro Station accepts
Onset’s full suite of plug-and-play Smart Sensors, and is
battery-powered for up to one year.
Supported Measurements: Temperature, Relative Humidity, Dew
Point, Wind Speed, Wind Direction, Rainfall, Soil Moisture, Solar Radiation, PAR, Barometric Pressure, Leaf Wetness, 4-20mA, Voltage Input,
Pulse Input, Light Intensity
Key Advantages:
Data Logging Systems Comparison
• Improved weatherproof enclosure for harsh environments
• Compact and low cost, with 4 sensor inputs
• Up to 2 DC voltage or 4-20mA input adapters
Minimum System Requirements:
Software
See pg 35
Interface
Cable*
Sensor
See pg 39
For complete information and accessories, please visit: www.onsetcomp.com
Part number
H21-002
Memory
Operating Range
Sensor Inputs
512K non-volatile flash data storage
-20° to 50°C (-4° to 122°F) with alkaline batteries, -40° to 70°C (-40° to 158°F) with lithium batteries
Up to four Smart Sensors (including multiple-parameter sensors)
Communication
RS-232 via 3.5 mm serial port
Logging Interval
1 second to 18 hours, user-specified interval
Time Accuracy
Dimensions
0 to 2 seconds for the first data point and ± 5 seconds per week at 25°C (77°F)
1 year typical, up to 10 sensors w/10 minute or longer logging interval,
4 AA alkaline batteries (included)
8.9 cm H x 11.4 cm D x 5.4 cm W (3.5 x 4.5 x 2.125 in)
CE Compliant
Yes
Battery Life
*USB interface cable. See page 43
onsetcomp.com
24
TidbiT v2 Temp Logger
®
Small, durable logger for measuring water temperature
Onset’s smallest data logger, the TidbiT v2, has 12-bit
resolution and a precision sensor for ±0.2°C accuracy over a
wide temperature range. It is waterproof to 300 meters (1,000
feet) and can be used in a wide range of water temperature
monitoring applications.
Supported Measurements: Temperature
Key Advantages:
• Onset’s smallest temperature logger
• Waterproof to 300 meters (1,000 feet) • Data readout in less than 30 seconds via fast optic USB
interface
Minimum System Requirements:
Data Loggers / Waterproof
Software Base Station* Coupler1
See pg 35 See pg 45
For complete information and accessories, please visit: www.onsetcomp.com
Part number
UTBI-001
Operation range
Accuracy
Resolution
Temperature Sensor
-20° to 70°C (-4° to 158°F) in air; maximum sustained temperature of 30°C (86°F) in water**
± 0.21°C over 0° to 50°C (± 0.38°F over 32° to 122°F)
0.02°C at 25°C (0.04°F at 77°F)
Response time
5 minutes in water; 12 minutes in air moving 2 m/sec; 20 minutes in air moving 1 m/sec (typical to 90%)
Stability (drift)
0.1°C (0.18°F) per year
Logger
Real-time clock
± 1 minute per month 0° to 50°C (32° to 122°F)
Battery
3 Volt lithium, non-replaceable
Battery life
5 years with 1 minute or greater logging interval
Memory
42,000 measurements
Waterproof
To 305 m (1,000 ft)
Dimensions
3.0 × 4.1 × 1.7 cm (1.2 × 1.6 × 0.68 in); mounting bail 4.6 mm (3/16 in) diameter hole
CE compliant
Yes
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
1
Coupler included with HOBO Base Station or HOBO Waterproof Shuttle.
**To guarantee accuracy, the TidbiT v2 Temp must not be used in condensing environments and water temperatures higher than 30°C
(86°F) for more than eight cumulative weeks over the life of the logger. Frequent or prolonged exposure will lead to measurement drift
and eventual failure.
25
onsetcomp.com
HOBO Water Temp Pro v2 Logger
Affordable temperature monitoring for fresh or salt water
The HOBO Water Temp Pro v2 data logger features 12-bit
resolution and a precision sensor for ±0.2°C accuracy
over a wide temperature range. Designed with a durable
streamlined case for extended deployment in fresh or salt
water, the Water Temp Pro v2 is equipped with an Optic
USB interface for data offload in the field, even when the
data logger is wet.
Supported Measurements: Temperature
Key Advantages:
• Research-grade measurements at an affordable price
• Waterproof to 120 meters (400 feet)
• Data readout in less than 30 seconds via fast Optic USB interface
Data Loggers / Waterproof
Minimum System Requirements:
Software Base Station* Coupler1
See pg 35 See pg 45
For complete information and accessories, please visit: www.onsetcomp.com
Part number
U22-001
Memory
Logging interval
Battery life
42,000 measurements
1 second to 18 hours, fixed - or multiple-rate up to 8 user-defined sampling intervals
6 years with 1 minute or greater logging interval, factory-replaceable ONLY
Measurement range
-40° to 70°C (-40° to 158°F) in air; maximum sustained temperature of 50°C (122°F) in water
Accuracy
± 0.21°C over 0° to 50°C (± 0.38°F over 32° to 122°F)
Resolution
0.02°C at 25°C (0.04°F at 77°F)
Response time
(90%) 5 minutes in water; 12 minutes in air moving 2 m/sec (typical)
Dimensions
3.0 cm (1.19 in) maximum diameter, 11.4 cm (4.5 in) length; mounting hole 6.3 mm (0.25 in) dia
CE compliant
Yes
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
1
Coupler included with HOBO Base Station or HOBO Waterproof Shuttle.
onsetcomp.com
26
HOBO Pendant Loggers
Low-cost data logging solution for temperature, light, and more
HOBO Pendant data loggers are economical, weatherproof,
and waterproof temperature data loggers designed for a
variety of short- and long-term monitoring applications.
Supported Measurements: Temperature, Light Intensity,
Tilt, Acceleration
Key Advantages:
• Low-cost temperature, light intensity, and acceleration
loggers
• Waterproof housing for wet or underwater use
• Data readout in less than 30 seconds via Optic USB interface
Minimum System Requirements:
Data Loggers / Waterproof
Software Base Station*
See pg 35 See pg 46
For complete information and accessories, please visit: www.onsetcomp.com
Part number
UA-001-08
UA-001-64
UA-002-08
UA-002-64
Memory
(measurements)
6,500 temp
52,000 temp
3,500 temp & light
28,000 temp & light
Sample rate
Battery life
Water Depth Rating
1 second to 18 hours, user-selectable
1 year typical, user-replaceable, CR2032
30 m from -20 to 20°C (100 ft from -4° to 68°F)
Temperature
Measurement range
-20° to 70°C (-4° to 158°F) in air, -20° to 50°C (-4° to 122°F) in water
Accuracy
± 0.53°C from 0° to 50°C (± 0.95°F from 32° to 122°F)
Resolution (10-bit)
0.14°C @ 25°C (0.25°F @ 77°F)
Response time
10 minutes (to 90% in airflow of 2 m/s), 5 minutes (to 90% in water)
Light intensity
Range
0-323,000 lumens/m2 [0-30,000 foot candles (lumens/ft2)]
Acceleration
Measurement range
Accuracy
Resolution (8-bit)
±3G
±2.5% FS @ 25°C (77°F)—Factory-calibrated
0.02 G
Tilt/Motion
Measurement range
Accuracy
Resolution (8-bit)
Dimensions
±3G
±2.5% FS @ 25°C (77°F)—Factory-calibrated
±4.3° @ 90° to ±13° @ 0° and 180°
5.8 x 3.3 x 2.3 cm (2.3 x 1.3 x 0.9 in)
CE compliant
Yes
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
1
For more details, see page 18
27
onsetcomp.com
UA-004-641
64,000 accel
32,000 tilt
21,333 motion
100 per second
HOBO U12 Deep Ocean Temp Logger
Water temperature monitoring in extreme ocean environments
The HOBO U12 Deep Ocean Temperature data logger is
designed to track water temperatures in the most extreme
ocean environments. Built with a virtually indestructible
titanium housing, the logger can withstand corrosive salt
water and exposure to extreme temperature and pressure at
depths of up to 11,000 meters.
Supported Measurements: Temperature
Key Advantages:
•
•
•
•
Withstands depths up to 11,000 meters (36,080 feet)
Extended temperature range: -40° to 125°C
Fast readout via direct USB interface
Titanium housing for use in saltwater
Data Loggers / Waterproof
Minimum System Requirements:
Software USB cable*
See pg 35
For complete information and accessories, please visit: www.onsetcomp.com
Part number
U12-015-03
Memory
Sample rate
Battery life
Accuracy
43,000 measurements
1 second to 18 hours, user-selectable
3 years typical, factory-replaceable
Logging: -40° to 125°C (-40° to 257°F)
Launch/Readout: 0° to 50°C (32° to 122°F), per USB specification
± 0.25°C from 0° to 50°C (± 0.45°F from 32° to 122°F)
Resolution (12 bit)
0.02°@ 25°C (0.04°@ 77°F)
Response time
<4 minutes (to 90% in water)
Dimensions
114 x 20.6 mm diameter (4.5 x 0.81 in diameter) 6.4 mm (0.25 in) mounting hole
CE compliant
Yes
Measurement range
*USB cable included with software part # BHW-PRO-CD
onsetcomp.com
28
New! HOBO MX2001 Water Level Logger
Wireless access to water level and temperature data via Bluetooth Low Energy (BLE)
Onset’s HOBO MX2001 is the industry’s first water level
data logger designed for convenient wireless setup and
download from mobile devices via Bluetooth Low Energy (BLE)
technology. The logger dramatically simplifies and lowers the
cost of field data collection by providing wireless access to
high-accuracy water level and temperature measurements right
from a mobile phone or tablet.
Supported Measurements: Water Level, Water
Temperature, Absolute Pressure, Barometric Pressure,
Differential Pressure
Key Advantages:
Data Loggers / Waterproof
• Wireless data offload to mobile devices via BLE
• Direct-read cable connects sensor to top-end logger
• Integrated barometric pressure sensor enables direct water
level readout
• Reference water level can be entered at start of deployment
• Use HOBOmobile for setup, data viewing, and data sharing
• The cable includes Kevlar strength member
• Powered by two user replaceable AA batteries
• Normal, multi-rate, and burst-logging modes
• Durable ceramic sensor
• Available with stainless steel or titanium sensor ends
Minimum System Requirements:
HOBOmobile
See pg 36
Mobile
device*
Cable
See pg 44
Accurate Data, Easily
Onset’s HOBOmobile™ app, a free download from iTunes,
makes it a snap to configure HOBO MX2001 loggers and
manage the collected data. You can view data in graphs, check
the operational status of loggers, configure alarm notifications,
and share data files.
*Mobile device with: -iOS 8.3, 8.4, or 9.0 -Bluetooth 4.0 or later
29
onsetcomp.com
HOBO MX2001 Water Level Logger
Innovative
Two-sensor design provides direct
water level readout without vent
tubes.
User-replaceable batteries
Interchangeable kevlar reinforced cable
Integrated barometric pressure sensor
Bluetooth Low Energy (BLE) communication
Data Loggers / Waterproof
Durable ceramic sensor
For complete information and accessories, please visit: www.onsetcomp.com
Part number
MX2001-01 (and-Ti)
MX2001-02
MX2001-03
MX2001-04 (and-Ti)
Approx. 0 to 9 m
(0 to 30 ft)
Approx. 0 to 30.6 m
(0 to 100 ft)
Approx. 0 to 76.5 m
(0 to 251 ft)
Approx. 0 to 4 m
(0 to 13 ft)
69 to 207 kPa
(10 to 30 psia)
69 to 400 kPa
(10 to 58 psia)
69 to 850 kPa
(10 to 123.3 psia)
69 to 145 kPa
(10 to 21 psia)
±0.05% FS, 0.5 cm
(0.015 ft)
0.02 kPa (0.003 psi),
0.21 cm (0.007 ft) water
±0.05% FS, 1.5 cm
(0.05 ft)
<0.04 kPa (0.006 psi),
0.41 cm (0.013 ft) water
±0.05% FS, 3.8 cm
(0.125 ft)
<0.085 kPa (0.012 psi),
0.87 cm (0.028 ft) water
±0.075% FS, 0.3 cm
(0.01 ft)
<0.014 kPa (0.002 psi),
0.14 cm (0.005 ft) water
Water Level
Range
Calibrated Range (0° to
40°C (32° to 104°F)
Accuracy (Typical)
Resolution
Temperature
Range
-20° to 50°C (-4° to 122°F)
Accuracy
±0.44°C from 0° to 50°C (±0.79°F from 32° to 122°F)
Resolution
0.1°C at 25°C (0.18°F at 77°F)
Barometric Pressure
Range
66 to 107 kPa (9.57 to 15.52 psia)
Accuracy (typical)
±0.075% FS, 0.3 cm (0.01 ft) water
Logger Specifications
Operating Range
-20° to 50°C (-4° to 122°F)
Transmission Range
Approximately 30.5 m (100 ft) line-of-sight
Dimensions
Top end (MX2001-TOP): 2.54 cm (1.0 inches) diameter, 28.9 cm (11.4 inches) length
Sensor end (MX2001-0x-S and MX2001-0x-Ti-S: 2.54 cm (1.0 inches) diameter, 9.91 cm (3.9 inches) length
CE compliant
Yes
FCC compliant
Yes
Mobile Device Compatibility
*iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later
Bluetooth Compatibility
Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart)
See pages 43-44 for additional accessories
Direct read cables can be ordered in lengths from 0.2 m to 500 m
onsetcomp.com
30
HOBO U20 Series Water Level Loggers
Accurate, affordable water level monitoring
HOBO Water Level data loggers offer high accuracy
at an affordable price, with no cumbersome vent
tubes or desiccants to maintain. These data loggers
are ideal for recording water levels and temperatures
in wells, streams, lakes, wetlands and tidal estuaries.
Supported Measurements: Water Level, Barometric
Pressure, Pressure (Absolute), Temperature
Key Advantages:
•
•
•
•
•
Available in 4 depth ranges
No-vent-tube design for easy and reliable deployment
Available in stainless steel and titanium* versions
Durable ceramic pressure sensor for reliable performance
Calibration certificate included
Water Level Logger Kits:
Deluxe Kit includes a carrying case,
two HOBO Water Level Loggers
(one 13 foot for barometric pressure
and one 13 foot, 30 foot, or 100
foot), HOBOware Pro software, and
a HOBO Waterproof Data Shuttle
with coupler. The Starter Kit includes
a HOBO Water Level Logger,
HOBOware Pro Software, and an
Optic USB Base Station. Available in
13 foot, 30 foot, and 100 foot depths.
Minimum System Requirements:
Data Loggers / Waterproof
Software Base Station1 Coupler2
See pg 35 See pg 45
Deluxe Kit
Starter Kit
For complete information and accessories, please visit: www.onsetcomp.com
Part number
U20-001-04/
U20-001-04-Ti
U20-001-01/
U20-001-01-Ti
U20-001-02/
U20-001-02-Ti
U20-001-03/
U20-001-03-Ti
HOBO Water Level Specifications
0-4 m (0-13 ft)
0-145 kPa (0-21 psia)
0-9 m (0-30 ft)
0-207 kPa (0-30 psia)
0-30 m (0-100 ft)
0-400 kPa (0-58 psia)
0-76 m (0-250 ft)
0-850 kPa (0-123 psia)
69 to 145 kPa
(10-21 psia)
69 to 207 kPa
(10-30 psia)
69 to 400 kPa
(10-58 psia)
69 to 850 kPa
(10-123 psia)
Water Level Accuracy
(Typical Error)
± 0.3 cm (0.01 ft)
(± 0.075% FS)
± 0.5 cm (0.015 ft)
(± 0.05% FS)
± 1.5 cm (0.05 ft)
(± 0.05% FS)
± 3.8 cm (0.125 ft)
(± 0.05% FS)
Resolution
0.14 cm (0.005 ft)
0.21 cm (0.007 ft)
0.41 cm (0.013 ft)
0.87 cm (0.028 ft)
Range
Factory Calibrated
Range (0° to 40°C;
32° to 104°F)
Burst Pressure
Range
Accuracy
Resolution (10 bit)
Response time
Dimensions
CE compliant
310 kPa (45 psia)
18 m (60 ft) depth
500 kPa (72.5 psia)
40.8 m (134 ft) depth
Temperature Specifications (all models)
-20° to 50°C (-4° to 122°F)
± 0.37° @ 20°C (± 0.67° @ 68°F)
± 0.44° from 0° to 50°C (± 0.79° from 32° to 122°F)
0.1° @ 20°C (0.18° @ 68°F)
5 minutes (to 90% in water)
2.46 cm diameter x 15 cm (0.97 x 5.9 in) hole in mounting bail 6.3 mm (0.25 in)
Yes
*Titanium version recommended for saltwater deployment.
1
HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
2
Coupler included with HOBO Base Station or HOBO Waterproof Shuttle.
31
1200 kPa (174 psia)
112 m (368 ft) depth
onsetcomp.com
HOBO U20L Series Water Level Loggers
A new standard for price/performance
HOBO U20L Series Water Level loggers set a new
standard for price/performance for accurate water level
and temperature monitoring. The loggers combine 0.1%
measurement accuracy, a polypropylene housing for use
in both fresh and salt water, and a non-vented design for
convenient and hassle-free deployment.
Supported Measurements: Water Level, Barometric Pressure,
Pressure (Absolute), Temperature
Key Advantages:
•
•
•
•
Self-contained, non-vented design enables easy deployment
Ideal for use in both fresh and saltwater environments
Durable ceramic pressure sensor
Ideal for use in wells, streams, lakes, wetlands and tidal areas
Data Loggers / Waterproof
Minimum System Requirements:
Software Base Station1 Coupler2
See pg 35 See pg 45
For complete information and accessories, please visit: www.onsetcomp.com
Part number
U20L-04
U20L-01
U20L-02
0-4 m (0-13 ft)
0 to 145 kPa (0 to 21 psia)
0-9 m (0-30 ft)
0 to 207 kPa (0 to 30 psia)
0-30.6 m (0-100 ft)
0 to 400 kPa (0 to 58 psia)
69 to 145 kPa
(10 to 21 psia)
69 to 207 kPa
(10-30 psia)
69 to 400 kPa
(10 to 58 psia)
± 0.4 cm (0.013 ft)
(± 0.1% FS)
± 1.0 cm (0.03 ft)
(± 0.1% FS)
± 3.0 cm (0.1 ft)
(± 0.1% FS)
0.14 cm (0.005 ft) water
0.21 cm (0.007 ft) water
0.41 cm (0.013 ft) water
310 kPa (45 psia)
18 m (60 ft) depth
310 kPa (45 psia)
18 m (60 ft) depth
500 kPa (72.5 psia)
40.8 m (134 ft) depth
HOBO Water Level Specifications
Range
Factory Calibrated
Range (0° to 40°C;
32° to 104°F)
Water Level Accuracy
(Typical Error)
Resolution
Burst Pressure
Temperature Specifications (all models)
Range
Accuracy
Resolution (10 bit)
Response time
Dimensions
CE compliant
1
2
-20° to 50°C (-4° to 122°F)
± 0.37° @ 20°C (± 0.67° @ 68°F)
± 0.44° from 0° to 50°C (± 0.79° from 32° to 122°F)
0.1° @ 20°C (0.18° @ 68°F)
10 minutes (to 90% in water)
3.18 cm diameter x 15.24 cm (1.25 x 6.0 in) hole in mounting bail 6.3 mm (0.25 in)
Yes
HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
Coupler included with HOBO Base Station or HOBO Waterproof Shuttle.
onsetcomp.com
32
HOBO Conductivity Loggers
Conductivity monitoring for freshwater and stable saltwater applications
HOBO Conductivity Loggers are convenient, rugged, and
cost-effective data loggers for a variety of freshwater and
saltwater monitoring applications.
The HOBO U24-001 model provides high-accuracy
conductivity data in freshwater environments, for applications such as environmental impact monitoring, stormwater
management, and water quality studies.
The HOBO U24-002-C model is for saltwater environments with relatively small changes in salinity (±5,000 µS/cm)
such as saltwater bays, or to detect salinity events such as upwelling, rainstorm, and discharge events. This logger can
also be used to gather salinity data for salinity compensation of HOBO U26 Dissolved Oxygen logger data. Note: This
logger is not intended for monitoring salinity levels in waters with widely changing salinities as it can have significant
measurement error and drift in those environments.
Minimum System Requirements:
Supported Measurements: Conductivity, Salinity, Temperature
Key Advantages:
Data Loggers / Waterproof
• Non-contact capacitive sensor provides long life
• Easy access to sensor for cleaning and shedding air bubbles
• HOBOware Pro software provides compensation for fouling using calibration
points from the start and end of each deployment
• Optical interface provides high-speed, reliable data offload in wet environments
• Compatible with HOBO Waterproof Shuttle for easy and reliable data retrieval
Software Base Station* Coupler1
See pg 35 See pg 45
For complete information and accessories, please visit: www.onsetcomp.com
Part number
Memory
Conductivity Calibrated
Measurement Ranges
Conductivity Calibrated Range –
Temperature Range
Specific Conductance Accuracy
(in Calibrated Range using Conductivity Assistant and Calibration Measurements)
Conductivity Resolution (typical)
Conductivity Drift
Temperature Accuracy (in Calibrated Range)
U24-001 Conductivity
U24-002-C Conductivity/Salinity
18,500 temperature and conductivity measurements when using one conductivity range; 14,400
sets of measurements when using both conductivity ranges (64 kbytes)
Low Range: 100 to 10,000 μS/cm
Low Range: 0 to 1,000 μS/cm
Full Range: 0 to 10,000 μS/cm
High Range: 5,000 to 55,000 μS/cm
5° to 35°C (41° to 95°F)
Low Range: 3% of reading or 50 µS/cm,
whichever is greater
High Range: 5% of reading, in waters within
a range of ±3,000 µS/cm; waters with greater
variation can have substantially greater error
1 μS/cm
2 μS/cm
Up to 12% sensor drift per month. Use monthly
Less than 3% sensor drift per year
start & end-point calibration to compensate
0.1°C (0.2°F)
Low Range: 3% of reading, or 5 μS/cm
Full Range: 3% of reading, or 20 μS/cm,
whichever is greater
Temperature Resolution
Response Time
Measurement and Operating Range
Sample rate
0.01°C (0.02°F)
1 second to 90% of change (in water)
0° to 36°C (32° to 97°F) -non-freezing
1 second to 18 hrs, fixed or multiple-rate sampling with up to 8 user-defined sampling intervals
Time Accuracy
Battery
± 1 minute per month
3.6 Volt lithium battery, life: 3 years (at 1 minute logging), typical
Maximum Depth
Dimensions
70 m (225 ft)
3.18 cm diameter x 16.5 cm, with 6.3 mm mounting hole (1.25 in diameter x 6.5”, ¼ in hole)
CE compliant
Yes
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
1
Coupler included with HOBO Base Station or HOBO Waterproof Shuttle.
33
-2° to 36°C (28° to 97°F) -non-freezing
onsetcomp.com
HOBO Dissolved Oxygen Logger
Affordable, high-performance dissolved oxygen monitoring
The HOBO U26 Dissolved Oxygen Logger measures
concentrations of dissolved oxygen in lakes, streams, rivers,
estuaries, and coastal waters. Used by aquatic biologists,
hydrologists, and other research professionals to monitor water
quality, the U26 is ideal for climate change and environmental
impact studies as well as ecological and oceanographic
research.
The HOBO U26 combines the high-accuracy, robust
performance of industry-leading RDO® Basic (Rugged Dissolved
Oxygen) sensor technology with an easy-to-maintain design, all
at a fraction of the cost of other monitoring options.
Supported Measurements: Dissolved Oxygen, Temperature
Minimum System Requirements:
• Affordable, high performance DO monitoring with 0.2 mg/L accuracy
• Optical DO sensor technology for long-lasting calibration, less maintenance
• Software corrects for measurement drift from fouling; provides salinityadjusted DO concentration and percent saturation (Salinity adjustment
requires salinity meter reading or data logger file. Percent saturation requires
barometric pressure data file.)
• Optic USB interface for high-speed, reliable data offload
• Easy-to-replace DO sensor cap lasts six months
Software Base Station* Coupler1
See pg 35 See pg 45
Data Loggers / Waterproof
Key Advantages:
For complete information and accessories, please visit: www.onsetcomp.com
Part number
U26-001
Sensor Type
Measurement Range
Dissolved Oxygen
Optical
0 to 30 mg/L
Calibrated Range
0 to 20 mg/L; 0 to 35°C (32 to 95°F)
Accuracy
0.2 mg/L up to 8 mg/L; 0.5 mg/L from 8 to 20 mg/L
Resolution
0.02 mg/L
Response time
To 90% in less than 2 minutes
DO Sensor Cap Life
6 months (cap expires 7 months after initialization)
Operating Temperature and
Measurement Range
Temperature Accuracy
Temperature
-5 to 40°C (23 to 104°F), non-freezing
0.2°C (0.36°F)
Temperature Resolution
± 0.02°C (± 0.04°F)
Response Time
To 90% in less than 30 minutes
Logger
Memory
21,700 sets of DO and temperature measurements
Logging Rate
1 minute to 18 hours
Time Accuracy
± 1 minute per month at 25°C (77°F)
Battery
3.6 V lithium battery; factory replaceable, life: 3 years (at 1 minute logging)
Maximum Depth
100 m (328 ft)
Dimensions
39.6 mm diameter x 266.7 mm (1.56 in diameter x 10.5 in)
CE Compliant
Yes
*HOBO Base Station or HOBO Waterproof Shuttle required. See pages 45-46 for more details.
1
Coupler included with HOBO Base Station or HOBO Waterproof Shuttle.
onsetcomp.com
34
HOBOware / HOBOware Pro
Graphing and analysis software
HOBOware is Onset’s flagship setup, graphing
and analysis software package for HOBO data
loggers. It allows you to view, graph, and analyze
data with point-and-click simplicity. You can easily
set up your application in a matter of minutes,
quickly read out and plot data, and export to
spreadsheets for further analysis.
Software
Standard Features:
HOBOware Pro Features:
• Simple menus for fast, easy logger setup and readout
• Scaling to real-world engineering units
• Presentation-quality graphs
• Easy export of data files to text format
• Free download
• Time-saving tools for fast setup and readout
• Advanced plotting tools for more precise data analysis
• Access to Data Assistants for post-processing data
HOBOware features comparison
Download HOBOware today at
onsetcomp.com.
Or download your free 30-day
trial of HOBOware Pro. From
setup to analysis, no other data
logger software can compare
to the power and simplicity of
HOBOware Pro.
HOBOware
HOBOware Pro
Support for all HOBO data loggers
Quickly generate presentation-quality graphs
Copy & paste series
Merge data files
Save modified graphs as projects
Easy data export to XLS, CSV, & TXT files
Linear & Pulse Scaling Data Assistants
Time-saving tools for fast setup, readout & export
Data assistants for post processing Dissolved Oxygen,
Conductivity, Water Level, Growing Degree Days, Grains per
Pound & kWh
Ability to create pie charts
Crop a series to a specific time frame
Subset Statistics Tool for details within a time frame
21 CFR Part11 Compliance
Data Shuttle support
HOBOnode manager to support ZW Data Nodes
Free Download
System Requirements
• PC: Windows 8, Windows 7 (Pro, Ultimate and Home Premium), Windows 10 (Pro, Ultimate and Home Premium).
• Windows 7 Enterprise: Note: While HOBOware has been modified to work on Windows 7 Enterprise, there may be local configurations of that operating system that will not work with HOBOware.
• Mac: OS X Versions 10.9.x, 10.10.x and 10.11.x.​
• Java Runtime Environment (JRE) 1.6 or 1.7 (32-bit or 64-bit on Windows). Please note that Windows 8 users needing serial logger support must have Java 7 (1.7.0_9) or greater. Please note that
version 1.6, also known as Java 6, is officially supported on OS X
only on Intel Core 2 Duo and later processors. See the time zone note below.
• One of the following Internet browsers: Safari 6, Microsoft Internet Explorer 10 and 11, as well as the most recent versions of Firefox and Google Chrome.
• Minimum screen resolution of 1024x768. Recommended screen resolution of 1280x800 or greater particularly for non-English users.
• 256+ colors
• 1.8 GHz single core CPU, 1GM RAM*
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
35
onsetcomp.com
HOBOmobile
Easy logger setup and data management software for HOBO MX Series loggers
HOBOmobileTM is designed to enable
communication between a Bluetooth® Smart
mobile phone or tablet and the HOBO MX
series data loggers. You can configure and
start the data logger, download the recorded
data, and store and analyze the data. The
HOBOmobile app is a free download. See
pages 1-2 for more details.
HOBOmobile for Android currently
supports MX1101 only. Support for
MX1102 coming soon!
Key Advantages:
Software
• Communicate to HOBO MX data loggers using Bluetooth Smart, with no internet connection required
• Set data logger’s name, password, logging rate, alarm threshold, and start & stop time
• Configure and clear audible alarms
• Page the data logger
• Export and share data as CSV, TXT, XLSX or HOBO files
Measure and log temperature and relative humidity in sensitive environments
Warehouses and
storage facilities
Data centers and
high-tech
environments
Museums, archives
and libraries
Commercial
office buildings
Manufacturing
facilities and
testing labs
Hospitals
and labs
If CO2, temperature and humidity management are critical in your facility, do it faster and
easier than ever with the new, Bluetooth Smart enabled HOBO MX Series Data Loggers.
Without connecting anything or even coming into physical contact with your data logger,
you can set up the logger, check its status, page to locate it, and read out your data to
be shared. It’s incredibly easy for anyone to use, and leverages the tools we all have in
our back pockets and backpacks – our phones and tablets!
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
onsetcomp.com
36
HOBOnode Manager
Powerful network management software for HOBO ZW Series Data Loggers
HOBOnode Manager, a component of HOBOware
Pro, lets you view real-time energy and
environmental data, receive alarm notifications,
and manage and view your entire HOBO ZW
wireless sensor network. It offers a range of
convenient data access options and the ability
to export your data to Microsoft Excel and other
programs. See page 14 for more details.
Key Advantages:
Software
• Easy network setup and monitoring
• Real-time graphing
• Easy alarm setup
• Network Map feature for visual representation of all nodes and
network connections
View Real-Time Plots
Easy Alarm Setup
Automated Data Delivery
In the plots window, you can view
up to 20 sensor data points in realtime, all at once.
Easily configure both sensor and
system alarms. Get notified via text
message or email when conditions
exceed set thresholds.
Get your data forwarded to FTP
site or email address at regular intervals. Easy integration with thirdparty programs.
37
onsetcomp.com
HOBOlink Web-Based Display/Readout
Powerful web-based access to HOBO RX3000 Remote Monitoring Systems
HOBOlink is a web-enabled software platform
designed for HOBO RX30000 Remote Monitoring
Systems. This data logger software allows you to
easily access current and historical data, set alarm
notifications and relay activations, and manage
and control your HOBO RX3000 web-based data
logging systems. See pages 15, 23 and 24 for
more details.
Key Advantages:
Get 24/7 web access to your data
Access your data via web browser
Customize your data display
Verify RX3000 system status remotely
Set up and manage alarm notifications over the web
Schedule automated delivery of data files
Analyze data faster with custom export capabilities
Software
•
•
•
•
•
•
•
Web-based configuration
Get notified
Get data automatically
HOBOlink allows you to easily
configure sensors, logging, alarm
notifications, relay activations, and
more.
HOBOlink will send an email or a
text message to your phone when
conditions exceed set thresholds.
Multiple levels of alarms and
actions can be set for each sensor.
Configure HOBOlink to
automatically deliver data from
RX3000s to other web-based
services, such as Weather
Underground.
onsetcomp.com
38
External Sensors by Measurement
Indoor Environmental
Temperature
Part number
S-THB-M0021
S-THB-M0081
S-TMB-M002
S-TMB-M006
S-TMB-M017
TC6-J
TC6-K
TC6-T
TCP6-K12
TMC1-HD
TMC6-HD
TMC20-HD
TMC50-HD
TMC6-HC
TMC6-HE
Type
12-bit Temp/RH smart (2m cable)
12-bit Temp/RH smart (8m cable)
12-bit Temp/RH smart (2m cable)
12-bit Temp smart (6m cable)
12-bit Temp smart (17m cable)
Type J beaded thermocouple
Type K beaded thermocouple
Type T beaded thermocouple
Type K Probe thermocouple
Air/Water/Soil Temp (1’ cable)
Air/Water/Soil Temp (6’ cable)
Air/Water/Soil Temp (20’ cable)
Air/Water/Soil Temp (50’ cable)
Stainless steel Temp probe (6’ cable)
Pipe Temp (6’ cable)
RX3000
√
√
√
√
√
U30
√
√
√
√
√
H21
√
√
√
√
√
H22
√
√
√
√
√
U12
U14
√
√
√
√
√
√
√
√
√
√
√
ZW
√
√
√
√
√
√
UX90 UX100
√
√
√
√
UX120
√
√
√
√
√
√
√
√
√
√
Relative Humidity
Part number
S-THB-M0021
S-THB-M0081
Type
12-bit Temp/RH smart (2m cable)
12-bit Temp/RH smart (8m cable)
RX3000
√
√
U30
√
√
H21
√
√
H22
√
√
U12
U14
√
√
ZW
UX90 UX100
UX120
Type
Telaire 7001 CO2
RX3000
√
U30
√
H21
H22
√
U12
√
U14
ZW
√
UX90 UX100
UX120
√
Type
Air Velocity – 5 m/s long
Air Velocity – 10 m/s long
Air Velocity – 5 m/s std
Air Velocity – 10 m/s std
RX3000
√
√
√
√
U30
√
√
√
√
H21
H22
√
√
√
√
U12
√
√
√
√
U14
ZW
√
√
√
√
UX90 UX100
UX120
√
√
√
√
RX3000
√
U30
√
H21
H22
√
U12
√
U14
ZW
√
UX90 UX100
UX120
√
RX3000
√
√
U30
√
√
H21
H22
√
√
U12
√
√
U14
ZW
√
√
UX90 UX100
UX120
√
√
RX3000
√
√
U30
√
√
H21
H22
√
√
U12
√
√
U14
ZW
√
√
UX90 UX100
UX120
√
√
External Sensors
Carbon Dioxide
Part number
TEL-7001
Air Velocity
Part number
T-DCI-F900-L-O
T-DCI-F900-L-P
T-DCI-F900-S-O
T-DCI-F900-S-P
Volatile Organic Compound
Part number
T-ION-TVOC
Type
Volatile Organic Compound
Differential Pressure
Part number
T-VER-PXU-L
T-VER-PXU-X
Type
Differential pressure transducer
Differential pressure transducer
Compressed Air Flow
Part number
T-CDI-5200-10S
T-CDI-5200-20S
1
39
Type
Compressed Air Flow Meter
Compressed Air Flow Meter
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
onsetcomp.com
External Sensors by Measurement
Gauge Pressure
Part number
T-ASH-G2-100
T-ASH-G2-200
T-ASH-G2-500
Type
Ashcroft gauge pressure
Ashcroft gauge pressure
Ashcroft gauge pressure
RX3000
√
√
√
U30
√
√
√
H21
H22
√
√
√
U12
√
√
√
U14
ZW
√
√
√
UX90 UX100
UX120
√
√
√
RX3000
√
√
√
√
√
√
√
√
U30
√
√
√
√
√
√
√
√
H21
√
√
√
√
√
U12
U14
ZW
√
√
√
√
√
√
√
√
UX90 UX100
√
√
H22
√
√
√
√
√
√
√
√
UX120
√
√
√
√
√
√
√
√
RX3000
U30
H21
H22
√
√
√
√
√
√
√
√
√
√
√
√
√
ZW
√
√
√
√
√
UX90 UX100
√
√
√
√
√
√
√
√
√
√
√
√
√
U12
√
√
√
√
√
RX3000
√
√
√
U30
√
√
√
H21
√
√
√
√
√
√
Energy/Power
kW & kWh
Part number
T-VER-E50B2
T-WNB-3D-240
T-WNB-3D-480
T-WNB-3Y-208-P
T-WNB-3Y-208
T-VER-8044-100
T-VER-8051-300
T-VER-8053-800
Type
Power & Energy meter
WattNode 208/240 VAC 3-phase
WattNode 480 VAC 3-phase
WattNode 208-240VAC 2 or 3 Branch
WattNode 208/240 VAC 1,2, or 3-Phase
Veris 480 V, 100 Amp Kilowatt transducer
Veris kWh transducer 1-Phase, 300 Amp
Veris kWh transducer 3-Phase, 800 Amp
√
√
√
√
√
√
AC & DC Current
Type
2 - 20 Amp split-core AC current sensor
5 - 50 Amp split-core AC current sensor
10 - 100 Amp split-core AC current sensor
20 - 200 Amp split-core AC current sensor
60 - 600 Amp split-core AC current sensor
0.5 - 5 AMP split-core AC transformer
2 - 20 AMP split-core AC transformer
5 - 50 AMP split-core AC transformer
7.5 - 75 AMP split-core AC transformer
0.2 - 20 Amp split-core AC transformer
0.5 - 50 Amp split-core AC transformer
1 - 100 Amp split-core AC transformer
2.5 - 250 Amp split-core AC transformer
10 - 100 Amp split-core AC transformer
20 - 200 Amp split-core AC transformer
60 - 600 Amp split-core AC transformer
Split-Core Bi-Polar DC transducer
Split-Core 200A DC transducer
√
√
√
√
√
√
√
√
√
√
√
√
√
U14
√
√
√
√
UX120
√
√
√
√
√
External Sensors
Part number
CTV-A
CTV-B
CTV-C
CTV-D
CTV-E
T-MAG-0400-05
T-MAG-0400-20
T-MAG-0400-50
T-MAG-0400-75
T-ACT-0750-020
T-ACT-0750-050
T-ACT-0750-100
T-ACT-0750-250
T-MAG-SCT-100
T-MAG-SCT-200
T-MAG-SCT-600
T-VER-971BP-200
T-VER-H970-200
√
√
AC & DC Voltage
Part number
T-MAG-SPT-150
T-MAG-SPT-300
T-MAG-SPT-600
T-CON-ACT-150
T-CON-ACT-300
S-CIA-CM14
S-VIA-CM14
CABLE-ADAP5
CABLE-ADAP10
CABLE-ADAP24
CABLE-4-20MA
CABLE-2.5-STEREO
S-FS-CVIA
Type
150 Volt AC potential transformer
300 Volt AC potential transformer
600 Volt AC potential transformer
ConLab 0-150 Volt AC transmitter
ConLab 0-300 Volt AC transmitter
12-bit 4-20mA input adapter
12-bit voltage input adapter
Voltage input cable 0-5 VDC
Voltage input cable 0-10 VDC
Voltage input cable 0-24 VDC
Measures currents from 0 to 20.1 mA
Voltage input cable 0-2.5 VDC
FlexSmart analog module (2 channels)
H22
√
√
√
√
√
√
onsetcomp.com
U12
U14
ZW
UX90 UX100
UX120
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
40
External Sensors by Measurement
Energy/Power (continued)
Amp Hour, Amps, Power Factor, Volt-Amp Reactive,
Volt-Amp Reactive Hour, Volt Amps, Volts, Watt Hours, Watts
Part number
T-VER-E50B2
Type
Power & Energy meter
RX3000
√
U30
√
H21
√
H22
√
U12
U14
ZW
√
UX90 UX100
UX120
√
Type
Electronic switch pulse input adapter - 1m
Electronic switch pulse input adapter - 6m
Contact closure pulse input adapter - 1m
Contact closure pulse input adapter - 6m
Voltage input cable 0-2.5 VDC
RX3000
√
√
√
√
U30
√
√
√
√
H21
√
√
√
√
H22
√
√
√
√
U12
U14
ZW
UX90 UX100
UX120
Pulse
Part number
S-UCC-M001
S-UCC-M006
S-UCD-M001
S-UCD-M006
CABLE-2.5-STEREO
√
√
t
Time-of-Use
Motor On/Off
Part number
CSV-A81
Type
AC current switch
RX3000
U30
H21
H22
U12
U14
ZW
UX90 UX100
√
UX120
√
RX3000
√
√
√
U30
√
√
√
H21
√
√
√
H22
U12
U14
ZW
UX90 UX100
UX120
Water
Water Temperature
External Sensors
Part number
S-TMB-M0021
S-TMB-M006
S-TMB-M017
TMC1-HD
TMC6-HD
TMC20-HD
TMC50-HD
Type
12-bit Temp smart (2m cable)
12-bit Temp smart (6m cable)
12-bit Temp smart (17m cable)
Air/Water/Soil Temp (1’ cable)
Air/Water/Soil Temp (6’ cable)
Air/Water/Soil Temp (20’ cable)
Air/Water/Soil Temp (50’ cable)
t
t
t
t
t
t
√
√
√
√
t
t
t
t
t
t
t
t
Weather/Field
Temperature
Part number
S-THB-M0021
S-THB-M0081
S-TMB-M002
S-TMB-M006
S-TMB-M017
TC6-J
TC6-K
TC6-T
TCP6-K12
TMC1-HD
TMC6-HD
TMC20-HD
TMC50-HD
TMC6-HC
TMC6-HE
Type
12-bit Temp/RH smart (2m cable)
12-bit Temp/RH smart (8m cable)
12-bit Temp smart (2m cable)
12-bit Temp smart (6m cable)
12-bit Temp smart (17m cable)
Type J beaded thermocouple
Type K beaded thermocouple
Type T beaded thermocouple
Type K probe thermocouple
Air/Water/Soil Temp (1’ cable)
Air/Water/Soil Temp (6’ cable)
Air/Water/Soil Temp (20’ cable)
Air/Water/Soil Temp (50’ cable)
Stainless Steel Temp probe (6’ cable)
Pipe Temp (6’ cable)
RX3000
√
√
√
√
√
U30
√
√
√
√
√
H21
√
√
√
√
√
H22
U12
U14
t
t
t
t
t
t
t
t
t
t
√
√
√
√
√
√
t This logger is intended for indoor environments, but sensors are compatible.
* Requires UX100-014M Thermocouple logger.
1
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
41
onsetcomp.com
ZW
UX90 UX100
√*
√*
√*
√*
UX120
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
External Sensors by Measurement
Weather/Field (continued)
PAR
Part number
S-LIA-M003
Type
Photosynthetic light (PAR)
RX3000
√
U30
√
H21
√
H22
RX3000
√
U30
√
H21
√
H22
RX3000
√
U30
√
H21
√
√
H22
U12
U14
ZW
UX90 UX100
UX120
U12
U14
ZW
UX90 UX100
UX120
U12
U14
ZW
UX90 UX100
UX120
U12
U14
ZW
UX90 UX100
UX120
U12
U14
ZW
UX90 UX100
UX120
U12
U14
ZW
UX90 UX100
UX120
U12
U14
ZW
UX90 UX100
UX120
U12
U14
√
√
ZW
UX90 UX100
UX120
t
Solar Radiation
Part number
S-LIB-M003
Type
Solar radiation
t
Barometric Pressure
Part number
S-BPB-CM501
S-BPA-CM101
Type
Barometric pressure
HWS barometric pressure
t
t
Wind Speed & Direction
Type
Wind direction (3m cable)
Wind speed Smart Sensor (3m cable)
Wind Smart Sensor set
R.M. Young wind monitor-AQ adapter
R.M. Young marine wind adapter
R.M. Young wind monitor adapter
RX3000
√
√
√
√
√
√
U30
√
√
√
√
√
√
H21
√
√
√
√
√
√
H22
Type
.01” Rain gauge Smart Sensor (2m cable)
.2mm Rain gauge Smart Sensor (2m cable)
RX3000
√
√
U30
√
√
H21
√
√
H22
Type
EC-5 soil moisture Smart Sensor
10HS soil moisture Smart Sensor
RX3000
√
√
U30
√
√
H21
√
√
H22
Type
Leaf wetness Smart Sensor
RX3000
√
U30
√
H21
√
H22
RX3000
√
√
U30
√
√
H21
√
√
H22
√
√
t
t
t
t
t
t
Rainfall
Part number
S-RGA-M002
S-RGB-M002
t
t
Soil Moisture
Part number
S-SMC-M005
S-SMD-M005
t
t
Leaf Wetness
Part number
S-LWA-M003
t
Relative Humidity
Part number
S-THB-M0021
S-THB-M0081
Type
12-bit Temp/RH smart (2m cable)
12-bit Temp/RH smart (8m cable)
t This logger is intended for indoor environments, but sensors are compatible.
1
CE Compliant
t This logger is intended for indoor environments, but sensors are compatible.
1
Note: Temp & RH NIST certification services available for this product. Please visit onsetcomp.com, or call us at 1-800-564-4377.
onsetcomp.com
42
External Sensors
Part number
S-WDA-M003
S-WSB-M003
S-WSET-A
S-WCB-M003
S-WCC-M003
S-WCE-M003
Accessories
√
√
MX2001
√
UX120
√
√
UX100
√
UX90
UTBI
MX1102
U26
ZW
U24
MX1102
√
MX1102
√
ZW
√
ZW
√
UX120
√
UX120
√
UX100
√
UX100
√
UX90
√
√
UX90
√
U23
√
√
√
U22
√
√
√
U20
√
U30
RX3000
U26
U24
U23
U22
U20
U14
U12
√
√
UA
√
√
RG3
U-Shuttle data transporter
U30 shuttle data transporter
Waterproof shuttle
Pendant base station
Optic USB base station
UA
U-DT-1
U-DT-2
U-DTW-1
BASE-U-1
BASE-U-4
H22
Type
RG3
Part number
H21
Shuttles/Base Stations
√ √1
√
√
MX2001
UTBI
√
U30
√
RX3000
√
U14
√
U14
√
U12
√
U12
Serial interface cable for H-series HOBOs
USB cable for HOBO U-Series
USB to serial interface cable for H-series HOBOs
H22
CABLE-PC-3.5
CABLE-USBMB
ADAPT-SER-USB
H21
Type
H22
Part number
H21
Computer Interface Cables
√
√
MX2001
√
UTBI
√
U30
√
RX3000
U23
U26
√
U22
2” (5cm) Well Cap
5m Direct Read Cable
10m Direct Read Cable
15m Direct Read Cable
30m Direct Read Cable
60m Direct Read Cable
xxxm Custom Length Direct Read Cable3
For HOBO U10 and U12 underwater use
Protective Housing
U20
WELL-CAP-01
CABLE-DR-5.0
CABLE-DR-010
CABLE-DR-015
CABLE-DR-030
CABLE-DR-060
CABLE-DR-xxx2
SUBC2-xx
HOUSING-U2X
UA
Type
U24
Accessories
Part number
RG3
Water Logger Mounting
√
√
√
√
√
√
√
MX2001
MX1102
√
ZW
√
UX120
U30
UX100
√
UX90
U30
√
UTBI
RX3000
HRB-TEMP-1
Lithium batteries (box of 5)
√ √
HRB-U30-S100
10 Ahr battery w/cable
HP-B
Replacement battery for HOBO U23
√
For factory battery replacement and calibration services, please call 1-508-759-9500 or 1-800-LOGGERS
RX3000
U26
U24
U23
U22
U20
U14
U12
UA
RG3
Type
H22
Part number
H21
Replacement Batteries
UX90
UX100
UX120
ZW
MX1102
MX2001
UX90
UX100
UX120
ZW
MX1102
MX2001
√
UTBI
U26
√
U26
U23
U22
√
U24
√
U24
√
√
U20
U14
U12
Coupler (for use with BASE-U-4)1
Coupler (for use with BASE-U-4)
Coupler (for use with BASE-U-4)
Coupler (for use with BASE-U-4)
Coupler (for use with BASE-U-4)
Coupler (for use with BASE-U-4)
UA
COUPLER-UA
COUPLER2-A
COUPLER2-B
COUPLER2-C
COUPLER2-D
COUPLER2-E
RG3
Type
H22
Part number
H21
Replacement Couplers
√
√
√
√
√
√
√
√
1
2
43
Not compatible with UX120-006M
xxx is cable length in meters, ranging from 0.2m to 500m; cable length increments are larger for longer lengths
onsetcomp.com
UTBI
U30
RX3000
U23
U22
U20
U14
U12
For type J wire
For type K wire
For type T wire
UA
SMC-J
SMC-K
SMC-T
RG3
Type
H22
Part number
H21
Subminiature Connectors
Accessories
MX2001
√
MX1102
√
MX2001
ZW
√
MX1102
√
UX120
UX100
UX90
√
UTBI
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
U22
U23
U24
U26
RX3000
U30
UTBI
UX90
UX100
UX120
√
√
U20
√
√
√
U14
√
√
√
√
√
√
√
U12
√
√
√
√
√
UA
√
√
U30
√
√
√
√
RX3000
U26
U24
U23
U22
U20
U14
U12
√
UA
√
RG3
H22
Single phase fuse kit (for T-VER-E50B2 only)
Wiring kit (for T-VER-E50B2 only)
Voltage input lead set with alligator clips
Protective boot, black (cap included)
Protective boot, white (cap included)
Replacement cap for protective boot, black
Replacement cap for protective boot, white
Protective boot, black (5 ea)
Protective boot, white (5 ea)
Carrying case
Teflon coated SS cable (50 ft)
Teflon coated SS cable (300 ft)
Crimp sleeve (12 ea) for above cables
3 watt, 6 volt solar panel
6 watt, 6 volt solar panel
AC power adapter for the U30 (AC-U30-EU)
Solar radiation shield
Solar radiation shield (assembled)
Solar radiation shield
Mounting clamp (2 required)
1-foot fiber optic attachment for HOBO UX90
Pelican case- durable, watertight, FAA carry-on
Protective, weather-resistant case
RG3
T-VER-AH02
A-E50B2-LEADSET
A-WNB-LEADSET
BOOT-BLK
BOOT-WHT
85-CAPLUG-H20-B
85-CAPLUG-H20-W
BOOT-TIDBIT-BK
BOOT-TIDBIT-WH
U20-CASE-1
CABLE-1-50
CABLE-1-300
CABLE-1-CRIMP
SOLAR-3W
SOLAR-6W
AC-U30
RS1
M-RSA
RS3
U23-RS-CLAMPKIT
UX90-LIGHT-PIPE-1
CASE-PELICAN-1510
CASE-4X-2
H22
Type
H21
Part number
H21
Additional Accessories
Type
MX2001-TOP
MX2001-04-S
MX2001-01-S
MX2001-02-S
MX2001-03-S
MX2001-04-Ti-S
MX2001-01-Ti-S
U12-015-ORING-E
U12-015-ORING-V
H8X4-BK
HUM-RHPCB-1
HUM-RHPCB-2
HUM-RHPCB-3
HUM-RHPCB-3A
DESICCANT1
DESICCANT2
DESICCANT5
DESIC-PACK
85-DESICCANT6
UA-PARTSKIT
HUM-RHCAP2
CABLE-TEMP/RH
CABLE-U23-002
U26-RDOB-1
HOBO MX Water level logger Top End
MX Water Level Sensor End, 4m(13’)
MX Water Level Sensor End, 9m(30’)
MX Water Level Sensor End, 30m(100’)
MX Water Level Sensor End, 76m(250’)
MX Water Level Sensor End, 4m(13’)
MX Water Level Sensor End, 9m(30’)
O-ring kit (EPDM)
O-ring kit (Viton)
Replacement parts kit
RH sensor
RH sensor (includes S-THB)
RH sensor (for serial #s < 9847173)
RH sensor (for serial #s > 9847173)
Desiccant (25 ea) for UA & U23
Desiccant (25 ea) submersible cases
Desiccant (25 ea) for UA-003-64
Desiccant (2 ea) for U12-008
Desiccant pack for HOBO Micro Station
Parts kit for UA loggers
RH cap kit (5 ea) (includes S-THB))
Sensor cable for ZW loggers
Sensor cable
Replacement DO Sensor Cap
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Accessories
Part number
ZW
Additional Replacement Parts
√
√
√
√
√
√
√
√
√
√
onsetcomp.com
√
√
ZW
√
√
√
√
√
√
MX2001
UX120
√
√
MX1102
UX100
√
√
UX90
UTBI
U30
RX3000
√
√
√
√
U26
√
√
√
√
U24
√
√
U23
√
√
U22
√
√
U20
RG3
U14
One degree Temp & RH certification
Three degree Temp & RH certification
U12
NIST traceable setup/logger
NIST per-point/channel
UA
Temp only
NIST-SETUP
NIST-TEMP-POINT
Temp & RH
RH-NIST-ONEPOINT
RH-NIST-THREEPOINT
Type
H21
Part number
H22
NIST Certification
√
√
44
Data Shuttles/Base Stations
The HOBO U-Shuttle data transporter provides convenient in-field data offload and relaunch of
HOBO U-series loggers and HOBO Weather Stations, Micro Stations, and HOBO Energy Logger
systems.
Key Advantages:
• Enables convenient, easy data offload from HOBO U-Series, H21 and H22 data loggers and
UX data loggers (Base Station required for Optic USB loggers)
• Provides safe transport of data back to a computer
• Stores data from multiple data loggers
• Displays logger status, including memory, battery level, and sensor readings for some
sensors (on some models)
• CABLE-HOBO-SHTL and CABLE-USBMB included
2
HOBO U-Shuttle
U-DT-1
1
The HOBO U-DT-2 U30 Shuttle data transporter provides convenient in-field data offload and
relaunch of HOBO U30 NRC systems and HOBO Weather Stations (H21), Micro Stations, and
HOBO Energy Logger systems (H22).
Key Advantages:
Communications
• Enables convenient, easy data offload from HOBO U30 Series, H21 and H22 data loggers
• Provides safe transport of data back to a computer
• Stores data from multiple data loggers
HOBO U30 Shuttle
• Displays logger status, including memory, battery level, and sensor readings for some sensors
U-DT-2
• CABLE-HOBO-SHTL and CABLE-USBMB included
1
The HOBO Waterproof Shuttle provides convenient readout and relaunching of underwater
and outdoor HOBO loggers with an Optic USB interface, and is waterproof to 20 meters (66
feet). The HOBO Waterproof Shuttle can also be used as a Base Station.
Key Advantages:
• Can be used either as a data shuttle or an Optic USB Base Station
• Supports all HOBO Optic USB loggers
• Outdoor or underwater data readout
• Convenient direct USB connection to host computer
HOBO Waterproof
• Waterproof to 20 meters
Shuttle
• Checks and indicates its own battery status
U-DTW-1
1
The HOBO Optic USB Base Station and a series of couplers are used to offload data from any
HOBO data logger with an Optic USB interface. The Optic USB Base Station connects to your
computer via USB, while connecting to the logger via an appropriate coupler.
Key Advantages:
• Provides fast optical infrared (IR) communications for easy launch and readout of
all HOBO Optic USB loggers
• Splash-resistant
HOBO Base
Station
BASE-U-4
1
1
2
45
CE Compliant
Not compatible with UX120-006M
onsetcomp.com
Data Shuttles/Base Stations
The Pendant Base Station and Coupler provide fast optical infrared (IR)
communication for easy logger launch and readout of HOBO Pendant loggers. The
Base Station connects via USB to a host computer, while the coupler attaches the
logger to the Base Station for communications.
Key Advantages:
Pendant Base
Station
BASE-U-1
• Provides fast optical communications for easy launch and readout of all
HOBO Pendant loggers
• Connects via USB cable to host computer
• Splash-resistant
1
HOBO Shuttle and Base Station Compatibility
Storage Capacity
HOBO UX90
HOBO UX100
HOBO UX120
HOBO U12
HOBO U24
HOBO U26
HOBO Pendant
HOBO U20
HOBO U22
HOBO U23
UTBI TidbiT Temp V2
RG3 Rain Gauge
HOBO H21
HOBO H22
HOBO U30
504 loggers/8k memory
63 loggers/64k memory
7 loggers/512k memory
√
√
√
√
√
√2
√
√B
√B
√B
√B
√B
√B
√B
√B
√
√
√
√
√
√
Waterproof
Shuttle
U-DTW-1*1
Pendant
Base Station
BASE-U-11
Optic USB
Base Station
BASE -U-4*1
√
√
√
√
√
√
√
√
√
√
√
Communications
U-Shuttle
U30 Shuttle
Data Transporter Data Transporter
1
U-DT-1
U-DT-21
√
√
√
√
√
√
√
√
*Couplers are included
Products with a “√B” require a Base Station for use with the U-Shuttle.
1
CE Compliant
onsetcomp.com
46
The Onset Advantage
Responsiveness
Reliable, Accurate Data
Simple & Cost-Effective
Your projects have tight deadlines
that your monitoring partner must
be able to meet. Onset offers
a highly responsive, dynamic
manufacturing
environment
where we build and ship all
our products directly from our
headquarters on Cape Cod. Our
centralized operations and large
capacity enable us to provide
fast turnaround to meet your tight
project deadlines. Most orders
ship within 24 hours.
No matter what your application
involves, at the end of the day it
all comes down to the integrity
of your data. HOBOs, which
have become a generic name for
data loggers in many markets,
are known for providing the
most reliable, accurate energy
and environmental data under
some of the world’s toughest
environmental conditions.
At Onset, we realize that the
technology skill set of our
customers and their technology
budgets can vary widely. For
this reason, our products are
designed from the ground
up with ease-of-use and
affordability in mind.
Applications Expertise
World Class Support
With more than three decades
of experience in solving data
logging applications, Onset
has developed an applications
expertise that is second to none.
Whether you are measuring
building energy performance or
studying water and field ecology,
chances are we have seen your
application before and know
what it takes to solve it.
Many of our new customers
are surprised to find that when
they call Onset, a live person
answers the phone. Our
world-class technical service
department is staffed by friendly,
knowledgeable people who
listen carefully to your questions
and guide you through any
challenges that arise. Unlike
many technology companies,
Onset offers free technical
support for the life cycle of your
purchase.
“Temperature
and
relative
humidity monitoring is critical to
the preservation of our records.
Traditional data loggers would
have provided the data we
needed, but we didn’t want to
spend a lot of time manually
retrieving the data throughout
the building.
The wireless data nodes are
helping us make sure that our
archives are getting the best
protection possible.”
Harold Stoehr
Network Administrator
Washington State Archives
onsetcomp.com
About Onset
Onset is a leading supplier of data loggers. Our HOBO data loggers and weather stations are used around
the world in a broad range of monitoring applications, from verifying the performance of green buildings
and renewable energy systems to agricultural and coastal research.
Based on Cape Cod, Massachusetts, Onset has been designing and manufacturing its HOBO data loggers
on site since the company’s founding in 1981.
Onset headquarters, Cape Cod, MA
Go to onsetcomp.com to browse our white papers, application stories, videos, and webinars
Copyright© 2015 Onset Computer Corporation. All rights reserved. Onset, HOBO, HOBOware, HOBOlink, Pendant are registered trademarks of Onset
Computer Corporation. Other products and brand names may be trademarks or registered trademarks of their respective owners.
Patented technology (U.S. Patent 6,826,664)
MKT1059-1015
onsetcomp.com
www.onsetcomp.com