COP SECURITY SYSTEM CORP.
PROFESSIONAL CCTV
15-AU35M
3.5” TFT VIDEO / AUDIO & CABLE TESTER
USER’S MANUAL
1.
2.
3.
4.
5.
6.
7.
8.
CONTENTS
Purpose ...................................................................................................................... 2
System specification ................................................................................................... 2
Product Outlook .......................................................................................................... 3
Key pad description .................................................................................................... 4
Function item and description..................................................................................... 4
OSD function items and description............................................................................ 4
Coaxial cable test function.......................................................................................... 4
CAT.5 cable test function……………………………………………………..…………..….5
1
1. Purpose:
This product can receive the standard NTSC/PAL signal and measure the coaxial cable and CAT.5
quality to display on the 3.5” TFT – LCD
2. System specification:
Item
Specification
Panel Size
3.5 INCH DIAGONAL COLOR TFT
Resolution
480(H)x234(H) Dot
Active Area
72.00(W)x50.544(H)mm
Dot Pitch
0.150(H)x0.216(V)mm
Pixel Configuration
R.G.B.Delta
View Angle
Top=10deg., Bottom=30deg., Left=40deg., Right=40.,
Panel Dimension
83(W)x60.5(H)x3.2(D)mm
Back Light
LED 6 Type
Video Input
NTSC Composite Signal Input(H=15.734KHZ ±0.1KHz V=60Hz±1%)
Video Input
PAL Composite Signal Input(H=15.625KHZ ±0.1KHz V=50Hz±1%)
Video Type
1.0Vp-p/75Ω
Video System
NTSC / PAL auto switch
Input Source
Built in 1 BNC connector for CVBS in and 1 RCA connector for Audio in
Input Voltage
DC12V REGULATOR
Power Consumption
NORMAL : DC12V, 170mA (2W)
Speaker Output
1 AUDIO CHANEL (SP OUT 1W MAX)
Working Time
6hr
Charge Time
5hr
Low Voltage Triggering
10.7 V
System Cut off Voltage
9.3 V
Keypad Control
6 KEY (MODE / UP/ DOWN / LEFT / RIGHT / EXIT KEY)
Operation
Operating Temperature 0°C~50°C
Storage Temperature -25°C~80°C
Weight
320g
15-AU35M System Specification
2
CHARGE : DC12V, 1A (12W)
3. Product Outlook:
TOP VIEW
FRONT PANEL
Product Outlook
3
4 Key pad description:
Key name
Function
MODE
Function select (Camera OSD control、Coaxial tester、CAT.5 tester)
UP
Volume increase\ Item select
DOWN
Volume decrease \ Item select
LEFT
Screen mirror \ Value decrease
RIGHT
Screen upside-down \ Value increase
EXIT
Withdraw setting
Keypad definition
5
Function items and description
FUNCTION ITEM
Description
CONTRAST
0 ~ 100
Adjust contrast value from 0~100
BRIGHTNESS
0 ~ 100
Adjust brightness value from 0~100
COLOR
0 ~ 100
Adjust color value from 0~100
TINT
0 ~ 100
Adjust tint value from 0~100
1. If you do not push the function button over 15 seconds,the display will disappear
2. All the functions value could be memorize after power off.
3. Press EXIT key to withdraw from the mode
6
OSD function items and description
1. This function is only support COP OSD control camera. Please refer to the camera user’s manual.
2. All of the function keys as below will show on the camera user’s manual.
UP
7
DN
RTN
ETR/MNU
Coaxial cable test function
1. Press the MODE till the coaxial appear, 3 status will show on the screen when you connect the cable
with terminal.
2. Press EXIT key to withdraw from the mode.
4
ITEM
VALUE
CABLE QUALITY
1
0~30Ω
SHORT
2
30~150Ω
GOOD
3
150Ω~∞
OPEN
8 CAT.5 cable test function
ITEM
CABLE QUALITY
1
OPEN
2
SHORT
3
OK
4
REVERSE
5
ERROR
DESCRIPTION
Open loop will appear.
Wire short in same pair will appear
All of the RJ45 pins correct.
When 2 wires in the same pair opposite will appear
Any wire of different pairs short will appear.
1. it can only test the 568B type connection.
2. Press the MODE till the CAT.5 pair indication appear, 5 status will show on the screen when you
connect the CAT.5 cable with terminal.
3. Press EXIT key to withdraw from the mode.
5