Version LindQST 2.0 - EMAR

USER MANUAL
Version LindQST 2.0 - EMAR
Content
1
2
3
4
2
My Profile: ................................................................................................................................................. 6
1.1
Create a profile: ................................................................................................................................. 6
1.2
Login: ................................................................................................................................................. 9
1.3
Edit password: ................................................................................................................................. 11
1.4
Edit profile: ...................................................................................................................................... 13
Project List: .............................................................................................................................................. 15
2.1
Create a project: .............................................................................................................................. 15
2.2
Sort projects: ................................................................................................................................... 19
2.3
Delete a project: .............................................................................................................................. 21
2.4
Sort by Tags: .................................................................................................................................... 23
2.5
Send Project:.................................................................................................................................... 25
2.6
Open Project Manager: ................................................................................................................... 27
Project Manager: ..................................................................................................................................... 28
3.1
Rename room: ................................................................................................................................. 28
3.2
Setup room: ..................................................................................................................................... 30
Setup Room ............................................................................................................................................. 30
4.1
Clone room: ..................................................................................................................................... 30
4.2
Add room ......................................................................................................................................... 33
4.3
Remove room: ................................................................................................................................. 35
4.4
Rename floor: .................................................................................................................................. 37
4.5
Add floor .......................................................................................................................................... 39
4.6
Clone floor ....................................................................................................................................... 41
4.7
Remove floor: .................................................................................................................................. 44
4.8
Add products to a room .................................................................................................................. 46
5
6
Setup Room: ............................................................................................................................................ 47
5.1
Way 1: Create a squared room:....................................................................................................... 47
5.2
Way 2: Create an angled room: ....................................................................................................... 53
Comfort Designer: ................................................................................................................................... 58
6.1
Zoom: ............................................................................................................................................... 58
6.2
Measure Distance: ........................................................................................................................... 59
6.3
Move a product: .............................................................................................................................. 60
6.4
Rotate a product .............................................................................................................................. 62
6.5
Align a product: ............................................................................................................................... 64
6.6
Show Label:...................................................................................................................................... 66
6.7
Show distance to wall: ..................................................................................................................... 67
6.8
Flow Arrows ..................................................................................................................................... 68
6.9
Rotate Flow Arrows: ........................................................................................................................ 69
6.10
Device Snap: .................................................................................................................................... 71
6.11
Snap to false ceiling: ........................................................................................................................ 73
6.12
Show critical lenght: ........................................................................................................................ 74
6.13
Ceiling: ............................................................................................................................................. 75
6.14
View the room: ................................................................................................................................ 79
6.15
Calculation Verlocity: ....................................................................................................................... 84
7
Documentation Finder: ........................................................................................................................... 85
8
Get a diffuser into a room: ...................................................................................................................... 89
8.1
Way 1: Room has been created...................................................................................................... 89
8.2
Way 2: Room has not been created: ............................................................................................... 96
8.3
Way 3: Room has been created..................................................................................................... 105
Comfort Designer ................................................................................. Fehler! Textmarke nicht definiert.
9
3
Get a water bourne solution into a room: ............................................................................................ 106
9.1
Way 1: room has been created: .................................................................................................... 106
Product Selector Water ......................................................................................................................... 106
9.2
Way 2: Room has been created: ................................................................................................... 112
Product calculator water ....................................................................................................................... 112
9.3
Way 3: Room has been created: .................................................. Fehler! Textmarke nicht definiert.
Comfort Designer .................................................................................................................................. 115
9.4 .............................................................................................................................................................. 115
9.5
Way 4: Room has not been created: ............................................................................................. 116
Product Selector Water ......................................................................................................................... 116
9.6
Way 5: Room has not been created: ............................................................................................. 124
Product Calculator Water ...................................................................................................................... 124
10
10.1
Product Selector Air: ..................................................................................................................... 129
10.2
Product Selector Water: ................................................................................................................ 134
11
4
How to compare products: ................................................................................................................ 129
My Projects: ....................................................................................................................................... 138
11.1
Project List ..................................................................................................................................... 138
11.2
Print out Room report ................................................................................................................... 140
11.3
Create a room book: ...................................................................................................................... 142
....................................................................................................................................................................... 143
12
5
Wiring Schemes: ................................................................................................................................ 144
1 My Profile:
1.1 Create a profile:
Create a login so you are able to create a project and save it in LindQST
It will only be the user that has access to the profile and the information.
When you start up LindQst
you will enter this page
6
Enter register
Type in a valid email
and password.
Confirm password
and “Register”
A confirmation will be sent to your email.
Enter the link to
active account
7
Your account has now been activated
8
1.2 Login:
Enter login
Type in confirmed email
and password
Enter ”Login”
9
You are now logged in
10
1.3 Edit password:
Enter ”My profile”
Enter ”Change
Password”
11
Enter old and new
password and change
password
Continue
Password have now been changed
12
1.4 Edit profile:
Enter ”My Profile”
Enter ”Edit contact
information”
13
Edit
Enter information and save.
When you create a project the Profile
information will automatically follow when
you create a project.
14
2 Project List:
2.1 Create a project:
Enter”My Projects”
15
Create new
16
This is the information
from ”My Profile
Information”
Enter customer
information and click
”OK”
17
This is the project
name
When you create a project automatically a floor and a
room is added. Here you are able to Clone or/and add a
new Floor and room.
18
2.2 Sort projects:
When you have more than one project you are able sort the
projects by adding a Tag name.
After enter ”My Projects” you will enter this
page.
Enter “Manage Tags”
19
Enter a New Tag name and save.
Go to “My Projects” again
Here is the Tag name
20
2.3 Delete a project:
You can delete a project by
clicking on the ”Delete”
button
Click ”OK”
21
Project is now deleted
22
2.4 Sort by Tags:
You can do a quick search for a project if a Tag name has
been given.
Here are all the Tag names
23
Here you can find all the Tags name that have
been given
”Test 1” search found two
Projects
24
2.5 Send Project:
If you wants to share a project with some one
else you can send it directly from LindQst
Enter ”My Projects”
25
Enter ”send to”
Enter the email you want to share
your project with and if needed
enter a message.
26
2.6 Open Project Manager:
Enter the project name
You have now entered Project
Manager
27
3 Project Manager:
3.1 Rename room:
Enter ”My Projects” and select a
project.
Right click the mouse on the
room
28
Enter ”Rename” and
type in the new name
The new name
29
3.2 Setup room:
See Setup room to continue in chapter Setup
Room:47
4 Setup Room
4.1 Clone room:
If you have setup a room with customized size
and diffusers or chilled beams you can clone
the room to make two identical rooms.
Way 1:
Go to ”My Projects” and select a
project
30
Right click the mouse on
the room
Enter ”Clone”
31
Way 2
Enter ”Clone
selcted”
Room has been
cloned
32
4.2 Add room
Add a room if a new ”empty” room is
needed. Here you can customize the room
and add diffusers and chilled beams.
Enter ”My Projects”
and select a project
33
Enter ”New” and select
room
Have a look at the chapter:
Setup Room: on page 47
34
4.3 Remove room:
Mark the room that
you want to remove
Enter ”remove Selected”
Or
35
Right click in the floor that
should be removed and click
on ”Remove”
Floor have been
removed
36
4.4 Rename floor:
Enter ”My Projects” and
select a project
Right click on the
”Floor 1”
37
Click on ”Rename” and
type in the name
The new name
38
4.5 Add floor
Add a new ”Empty floor” with ”empty”
rooms. Customize the size of the rooms
and add new diffusers or chilled beams.
Go to ”My Projects”
and select a project
39
Enter ”New” and
select Floor.
New floor is now
added
40
4.6 Clone floor
Clone a floor if you already have
customized a floor and rooms that is
needed on a new floor.
Way 1:
Enter ”My Projects” and select
a project
41
Mark floor and select
”Clone Selected”
Floor is now cloned
42
Way 2:
Enter ”Clone Selected”
Floor is now
cloned
43
4.7 Remove floor:
Select the floor
that should be
removed
Enter ”Remove
Selected”
Or
44
Right click the mouse on the
floor that should be removed
and click “Remove”.
Floor is now removed
45
4.8 Add products to a room
When you add a product into the room it will be
placed into different groups of categories. Some
are supply products, some are exhaust. If there are
products there are outside of the categories it is
places on other
When choosing for example an LKA it will be placed in the
Supply group. You will be able to see how many Supply
devices you have as the number (1) will grove as more you
add.
The same goes for exhaust and other.
46
5 Setup Room:
Here you can customize the room as you want.
You can set the length, high, comfort zone and
high of false ceiling.
5.1 Create a squared room:
Mark the room and
enter ”Setup room”
47
Or
Right click the mouse on
the room and enter
”Setup room”
48
General:
Room name can be changed and you can
also change the room type.
49
Geometry:
Here you can enter the size of the room, set the high of
the false ceiling and change the size of the false ceiling.
Click “OK” or “Comfort designer” in the bottom when
you are finish.
50
Dimension criterias:
Depending on whether you are doing the dimension in order to
remove the heat loads in the room or in order to obtain the demand
for fresh air with regards to content of CO2 and depending on which
information you have, you can choose between the five different
dimension criteria.
Insert the values and click “OK” or “Comfort Designer”
51
Comfort zone:
Here you can set the high of comfort zone and
offset from wall.
Click “OK” or “Comfort Designer”
52
5.2 Create a user defined room geometry
Mark the room and
enter “Setup room”
Or
53
Right click on the
mouse and enter
”Setup room”
Enter ”Geometry”
54
Select ”UserDefinied”
55
Select ”Draw room” function
56
Click on the left mouse button when a new
direction is needed
Special Features:
Ctrl to make 45 and 90 degree.
Shift + left click mouse to undo last line.
ESC to cancel polygon
C to finish polygon
Click “OK” or “Comfort Designer” when finished.
57
6 Comfort Designer:
Toolbar:
When using the Comfort Designer there are many
different tools to work with.
Let us go through the toolbar
6.1 Zoom:
Use the ”+”-button to
zoom in and the ”-”
button to zoom out.
58
6.2 Measure Distance:
Use the measure tool to measure a distance. For
example from device to wall.
Hold the right mouse button down when
measuring
59
6.3 Move a product:
Mark the ”Move” button
Left click on the mouse and
move the product to the
wanted position.
60
61
6.4 Rotate a product
Mark the device that should be rotated.
Click on rotate button and the bar below
will appear
Enter the angel
and press ”OK”
62
Device has now been rotated
63
6.5 Align a product:
Select the device that should be aligned.
Select the button “Align” and then the
direction: Left, right, bottom or top.
This example shows align to left.
64
Select device that other
devices should be aligned
65
6.6 Show Label:
Click on ”Show labels” and label will
appear on the devices
66
6.7 Show distance to wall:
Mark the device and click the
“Show distance to wall” button.
67
6.8 Flow Arrows
To show the air flow direction mark the
device and click on the ”Flow Arrows”
button. The green air flows arrows will
appear.
68
6.9 Rotate Flow Arrows:
To rotate air flow arrows click on the
“Rotate arrows of selected device” and the
toolbar will appear.
Enter angel and press
”OK”
69
Angel of air flow is changed.
70
6.10 Device Snap:
When adding a wall diffuser to a
room you can by using the function
“Device snap” put the diffuser
outside of the room and into the
wall.
71
Click on the ”Device Snap”
button.
72
6.11 Snap to false ceiling:
By using this feature the device
will automatically be placed in the
center of the false ceiling plates.
73
6.12 Show critical lenght:
To show critical length click on the
“Show critical length” and the green
line will appear. It will turn red if the
length is critical
74
6.13 Ceiling:
75
Show/hide
World grid
Show/hide
Comfort zone
76
Show/hide false
ceiling
Move false
ceiling
77
Hold the right mouse
button down and drag the
ceiling to wanted position
78
6.14 View the room:
On top of the toolbar you can choose to see the room
from different angles.
Here you can see the false ceiling and the device from
top, front, right and the critical view.
Top view:
Here you can see the size of the room (4x4m) and the
device in the middle. The light blue square in the middle
is the comfort zone. The dark blue is outside of the
comfort zone. The squares in the middle is the plates of
the false ceiling.
79
80
Front view.
The grey box is the device and the grey line
underneath is the false ceiling. Blue square is the
comfort zone
81
Right view.
Same as front view
82
Critical view:
Here you can see the critical view.
If critical the green line will turn red
83
6.15 Calculation Verlocity:
Calculation of velocities with thermal air flows taken into account demands very detailed information of
all thermal conditions in the room and advanced tools to solve comprehensive and complicated equation
systems (e.g. CFD). In DimComfort 4.0 simpler formulas is used based on air jet theory and experience
from laboratory tests. Therefore calculations must be considered as a realistic estimate of the maximal
velocity in the occupied zone.
The occupied zone is defined in the Room Setup menu with the following defaults for mixing
ventilation: height hocc = 1,8 m, distance from wall xocc = 0.6 m and velocity requirement of 0,2 m/s.
Here you can se the Velocity diagram
84
7 Documentation Finder:
Enter ”Documentation Finder”
85
Type in criterias in both Production Catagory and
Product or just in one of them.
You can also do a Free Search.
A picture of the product appears when search is done
as shown
86
Here is a short
description of the
product
87
Here are the related documents of
the product.
Enter the documents by clicking on
the documents
88
8 Get a product into a room:
8.1 via Product Selector Air – room has been created
When searching for a diffuser you can do a search
by one or more criterias. However Air Flow MUST
be defined
Here you can choose room
type
Choose one or more criterias
Air Flow must be
defined
yHere you can choose product
catagory
89
Update search and show results
90
Choose a product by clicking
on the name of the product
91
Add to project
OK=> Comfo
92
Change floor or room if necessary.
Press ”OK”
Go to Project or directly into
Comfort Designer
93
Enter ”room” and the ”Comfort Designer”
Mark the room and enter
”Comfort Designer”
Or right click on the mouse and enter
”Comfort Designer”
94
Diffuser is now added to the room
95
8.2 via Product Selector Air - Room has not been created:
Here you can
choose room type
Choose one or
more criteria
Define Air Flow
Choose Product Catagory
96
Update search and
show results
97
Choose a product by clicking on the
product
98
Add to project
99
Create now
100
Type in customer
informations
101
Your profile
informations
Mark the room and Enter
”Setup room”
Or right click on the mouse
and enter ”setup room”
102
Enter ”Geometry” and type in
size of the room and ”Update”
103
Enter”Comfort Designer”
Diffuser has now been
added to the room
104
8.3 Via Comfort Designer
Find Diffuser
Or right click on the
room and enter ”Find
Diffuser”
See way 1 to continue in chapter on
page 89
105
9 Get a water borne solution into a room:
When searching for a Water Bourne Solution you can
do a seach by one or more criterias. However
capacity MUST be defined
9.1 Product Selector Water - room has been created:
Choose ”Product
Selector Water”
Capacity must be defined
Choose Product Catagory
Choose Product Selection
Search
106
Update search and
show results
107
Choose a product by clicking
on the product name
108
Add to project
109
Click ”OK”
Enter ”Comfort designer”
110
The product is now
added to the room
111
9.2 Product calculator water - room has been created:
Use Product Calculator Water if you know
what product you want but needs to have
a close look at the performance of the
product
Enter ”Product
Calculator Water”
Choose a product
112
Add to project
Click ”OK”
113
Enter ”Comfort Designer”
The product is now added
to the room
114
9.3 Comfort Designer
Find Device and enter”Find
Chilled Beam"
Or right click the mouse on the room and
enter ”Find Chilled Beam”
See way 1 to continue in chapter Product
Selector Water - room has been created:106
115
9.4 Product Selector Water - Room has not been created:
Enter ”Product Selector
Water”
Here you can choose
room type
116
Here you can choose one or
more criteria
Air Flow must be
defined
Update search and show results
117
Choose a product by
clicking on the name of
the product
118
Add to project
119
Enter ”Create now”
Type in customer
informations
Your profile
informations
Click ”OK”
120
Enter ”Setup Room”
Or right click the mouse on
the room and enter “Setup
room”
121
Enter ”Geometry” and set the size of
the room.
“Update results”
Enter ”Comfort
Designer”
122
The product is now
added to the room
123
9.5 Product Calculator Water - Room has not been created:
Choose a product
124
Add to project
Enter ”Create now”
125
Type in customers
informations
Your Profile
informations
Click ”Ok”
126
Enter”Comfort Designer”
Or right click the mouse on
the room and Enter
“Comfort Designer”
127
Product is now added to the
room. Now you can setup the
room
128
10 Compare products:
10.1 Product Selector Air:
Choose Product
Catagory
129
Choose one or
more criterias
Air Flow must be
defined
Update search and
show results
130
Choose maximum 3
products and click
”Compare”
131
Choose one product and
enter ”Select”
132
Now you can add the product to a
project, generate a PDF-file or
generate a DXF-file (CAD-File)
133
10.2 Product Selector Water:
Choose criterias if needed
Update search and show
results
134
Air Flow must be
defined
Choose maximum 3 products and
click ”Compare”
135
Choose one product and enter
”Select”
136
Now you can add the product to a
project, generate a PDF-file or
generate a DXF-file
137
11 My Projects:
11.1 Project List
138
Enter ”My Projects”
Here is a list of all active projects
139
11.2 Print out Room report
Enter a Project
Enter ”Comfort
Designer”
140
Enter ”Generate Report”
Choose one or more
pages and click ”OK”
141
11.3 Create a room book:
Create a room book if you have a project with many
Buildings, floors or rooms. It makes it easier and will
help you to get a great overview of the project.
Enter ”My Projects”
Open
142
Enter ”Generate room book” and an
excel document will appear.
143
12 Wiring Schemes:
The Wiring scheme helps you to see how the regulation
units are wired.
The example shows a Regula Combi connected to a water
unit with a Regula connect card and actuator 24V
Enter ”Wiring”
144
Select a Regulation unit
Select a program
145
Choose Connect
card
Choose actoator
for heating
Choose actuator
for cooling
This is how the current scheme
looks like
Reset to make new scheme or Generate a
PDF-file with the current scheme
146