ht t p: //www.iRiv erA merica.com

Instruction Manual

PORTABLE STORAGE DEVICE

& MULTI - CODEC JUKE BOX

Model iHP-100

Thank you for your purchase.

Please read this manual carefully before using your new player.

h t t p : / / w w w . i R i v e r A m e r i c a . c o m

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR

TV INTERFERENCE CAUSED BY UNAUTHORIZED

MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS

COULD VOID THE USER'S AUTHORITY TO OPERATE THE

EQUIPMENT.

1

2

Portable Storage Device

iHP-100 can be used as a storage device.

USB 2.0 is supported

iHP-100 supports USB 2.0 with maximum transfer speed of 480 Mbit/Sec.

Multi-Codec Player

Supports MP3, WMA, ASF, and WAV formats as a multi-Codec player.

iHP-100 supports WAV type of 11/22/44KHz, 16bit, Mono/Stereo.

Firmware Upgrade

Provides the latest updated features via firmware upgrade.

Player features such as add on, modification, and continuous improvement of the player are always provided.

Graphic LCD supporting Multiple Languages

iHP-100 comes with a graphic LCD which can support multiple languages, including: English, French, Spanish, German, Italian, other alphabet-oriented fonts, Korean, Japanese (Katakana, Hiragana, Kanji), Chinese (Traditional,

Simplified) and others. A total of 38 languages are supported.

FM Tuner

Auto scanning and frequency memory function make it easy for you to enjoy listening to the FM Radio.

This player supports 6 Equalizer Patterns.

Normal, Rock, Jazz, Classic, Ultra Bass, User EQ

Easy Navigation

The simple navigation with tree configuration makes it easy to find or save any song.

The player can recognize up to 1000 folders and 5000 files.

Graphic User Interface Menu Support

Voice recording and recording (Line-In/Optical In) from an external audio equipment is supported.

When voice recording, recording level is automatically controlled at voice recording mode.

Line-Out / Optical-Out function is supported

URL : http://www.iRiverAmerica.com

Provides information on our company, products, and email addresses for support.

Unique feature of "Firmware (system software) Upgrade" is available for download on our site. The Firmware Upgrade provides new features as well as enhancements to current features.

Register your iRiver product online so that our Customer Service is enabled to provide support as efficiently as possible.

Contents described in this manual may be changed to improve or any specification without notice.

The information, artwork, text, video, audio, pictures, software and other intellectual property are protected by copyright and international laws.

You may not reproduce, distribute, publicly perform, publicly display, modify or create derivative works of the intellectual property, unless authorized by the appropriate copyright owner(s). iRiver does not encourage any of our customers to use copy-righted Intellectual property illegally by using this product.

iRiver Limited does not assume any responsibility for errors or omissions in this document or make any commitment to update the information contained herein. iRiver is a registered trademark of iRiver Limited in the Republic of

Korea and/or other countries and is used under license.

All other brand and product names are trademarks of their respective companies or organization.

All other product names may be trademarks of the companies with which they are associated.

1999~2003 iRiver Limited, All rights reserved.

Microsoft Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries.

3

4

1. Locating the Controls

Front View, Side View.......................................................

Up/ Down Side, LCD Window...........................................

Remote Control.................................................................

5

6

7

2. Getting started

Using AC POWER ADAPTER..........................................

Software Installation..........................................................

Connecting the iHP-100 to the Host PC...........................

Installing the iHP-100 Device Driver.................................

Using as a Portable Storage Device.................................

Disconnecting the iHP-100 to the Host PC.......................

Listening to Music.............................................................

BasicOperation................................................................

8

9

10

11

12

13

14~15

16~19

3. Useful Features

Navigation Mode / Menu / Mode.......................................

Playback Mode.................................................................

Navigation.........................................................................

Upgrading DB...................................................................

Adding DB.........................................................................

Operating the FM Tuner....................................................

Recording..........................................................................

Playback Mode.................................................................

EQ.....................................................................................

Menu.................................................................................

Firmware Upgrade............................................................

19

20

21~23

24

25

26~28

29~31

32

33

34~42

43

4. Additional Information

Reference.........................................................................

Precautions......................................................................

Trouble Shooting...............................................................

Accessories.......................................................................

Product Specifications......................................................

Regulatory information......................................................

44

45

46

47

48

49

FRONT VIEW

Charging Indicator

SIDE VIEW

Mic

RecButton

LCD Window

HDD Operating Indicator

Jog Handle for Multi

Function Control

Power ON/ / FM

HDD(Play / Pause)

(Stop)/ Power OFF

A-B (Interval Repeat) /

MODE

HOLD

5

UP/ DOWN SIDE

LINE INPUT

(Optical / Analog)

Remote Control

RESET

(STOP) / Power OFF

Power ON /

FM HDD

(PLAY / PAUSE)

/

6

REMOTE

CONTROL/

EARPHONES

LINE OUTPUT

(Optical / Analog)

DC IN 5.0 V

USB Connection

Port

LCD Window

THE ORDER OF

SONGS PLAYBACK MODE

HOLD

FOLDER NAME

ARTIST NAME

TITLE NAME

LEVEL METER

PLAYBACK

INFORMATION

Capital

Lover’s

FILE FORMAT

BIT RATE

SAMPLE RATE

EQ

BATTERY INDICATOR

PROGRESSIVE BAR

LEVEL METER

PLAY TIME

LCD Window (Remote Control)

PLAYBACK

INFORMATION

THE ORDER

OF SONGS PLAY TIME

Main unit and Remote control both locked.

Only Main unit is locked.

Only Remote control is locked.

PLAYBACK MODE

HOLD

BATTERY INDICATOR

FOLDER NAME

TITLE NAME

PROGRESSIVE BAR

EQ

BIT RATE

SAMPLE RATE

FILE FORMAT

7

8

Using AC POWER ADAPTER

Use only the AC Power Adapter supplied with the player.

Connect the adapter to the 5.0V DC jack on the player and into an AC outlet.

To install “Program”

Windows 2000 and Windows XP have the program to support USB 2.0 Storage

Device, and you can use this player without any program installation.

Install the iRiver iHP Manager to use the Database Function. Windows 98 SE,

ME, require the iRiver iHP Manager to be installed.

Insert the Installation CD into the

CD-ROM drive. The following screen appears after inserting the

CD.

Click OK” to install the installation program.

Enter user information, click

"Next".

Select installation folder, click

"Next".

Recharging Method

Rechargeable function can automatically be activated while the AC adapter is connected to the player.

When fully charged, charge indicator light turns off.

Charging : Approx. 3 hours (At full discharge)

Discharging (Playback time) : Approx. 16 hours (At full charge)

Select installation type (Typical,

Minimal, or Custom), click "Next".

Installation is progressing.

9

10

Click “Finish”.

The installation is completed.

To connect the iHP-100 to the Host PC

Click to turn on the player.

Connect the USB cable to the player and the PC to recognize the correct information after Host PC is operated.

To PC

Type “A”

Type “A”

Type “B”

To iHP

USB port on the PC

USB cable

USB port on the iHP Series

Windows XP and Windows 2000 will display a

"Device Attached" icon.

Windows may ask to install a driver for the iHP driver.

Please follow the provided driver installation guide on the following page.

Once installed, open Windows

Explorer and an additional drive should be listed called 'iHP-100'.

Type “B”

To install the iHP-100 Device Driver

This processing must be done after installing the iHP-100 Manager Program.

If the player is recognized on your

PC, “Add New Hardware Wizard” is activated. Click “Next”.

Chose "Search for the best driver for your device (Recommended)."

Click Next.

Place a checkmark next to

"Specify a location" and click

Browse.

Locate the following path on your computer. C:\Program Files\ iRiver\iHP100\drivers, click “OK”.

Once the path has been located,

Click “Next”.

Click “Next”

Click “Finish”

Completed the installation of “Device Driver”.

11

To use as a portable storage device

If the player is not connected to the host PC, connect it to the host PC.

(Refer to page 10)

Check the icon of the player on the PC window and confirm whether the player is added as a new drive in Windows Explorer.

Click and Drag files from the PC to the iHP player.

To disconnect the player from the Host PC

Click the 'Safely Remove Hardware" icon in the System Tray.

Click “Stop iRiver iHP-100-Driver(X)” or “Safely Remove TOSHIBA

MK1 3GAL USB Disk Drive(X:)”. (Where X is the drive letter assigned to the iHP-100)

To delete files or folders from the iHP-100, select the files (folders) to be deleted and press "Delete" on the keyboard. Click “Yes” when asked to confirm the delete.

Click OK after confirming the “Safe To Remove Hardware” massage.

12

The iHP-100 operates just like an additional hard drive in Windows

Explorer. Files can be copied, deleted, etc.

Note

When the iHP-100 is attached to a computer for an extended period of time, be sure to plug in the AC adapter. Low batteries can prevent the proper functioning of the iHP-100.

Disconnect the USB cable between the iHP-100 and host PC.

13

Connect the headphones and remote control as shown below.

Put the HOLD switch to “OFF”.

Press the PLAY/STOP button to turn on the player.

Press it again to play.

To select music

: To select previous track

: To select next track

14

To adjust the volume

:

To increase volume

:

To decrease volume

NOTE

- When "Hold" is ON, the buttons on the player will not function.

- In case of stop status of the player or standby status of Voice recording, the player automatically turns off according to the setting of “STOP POWER OFF” on the

MENU.(Refer to page 39)

Power ON

To play / Pause

To stop

To play next track

To turn off the player

File playback FM receiving

To fast forward

To fast reverse

To play previous track

File Format displayed as below

MP3

ASF

WMA

WAV

Capital

Lover’s

15

16

To activate Navigation

1.

To increase volume.

2. To select the previous track or FM station.

3.

To increase volume.

4. To select the next track or FM station.

5.

To select NAVI/MENU function.

6. Internal Microphone

To activate Menu

7. To change record standby mode or start recording.

8.

To start or pause playback to change

FM HDD.

9.

To stop playback or recording or turn off.

10. HOLD: Enable or disable HOLD function.

Buttons do not work when HOLD is enabled.

Basic Operation

To adjust the volume

Press + on volume button to increase volume and press – on button to decrease volume.

File playback FM receiving

Selecting FM Mode when listening FM

Stereo Mono

To Record

[Record standby]

(Refer to page 26)

[To select source to record]

[To start recording]

[To select Bitrate Type] [To select File Type]

[To stop recording /

Standby for recording]

NAVIGATION

Press NAVI/MENU button and find the desired track by pressing the VOL + or VOL – button, or , NAVI/MENU button.

There are two methods using ID3 Tag and PATH/NAME of File on NAVIGATION.

Refer to page 21~23 for details.

17

18

The remote control operates every function by using 5 buttons.

STOP

PLAY / PAUSE

Main unit and Remote control both locked.

Only Main unit is locked.

Only Remote control is locked.

Basic Operation Function

Stop

Power Off

To listen to the next track, please push the jog switch to the right.

Playback and Pause

Navigation Operation

To listen to the previous track, please push the jog switch to the left.

Menu Operation

Basic Operation Function

Volume Control

Changing Mode

Slide jog lever to the right to increase volume or to the left to decrease volume.

HDD FM Changing

NAVIGATION

Press the Navi/Menu jog lever with a short click and find the desired track by pressing or . To play the track, press Navi/Menu with a short click.

To move to upper folder, press the STOP button. If there is no upper folder, pressing the Stop button will exit the NAVIGATION mode.

MENU

Long press of NAVI/MENU will enter the MENU.

Scrolling between menus : Press and

Select Function: press Navi/Menu button.

Exit: Press the stop button.

MODE

While an audio file is playing, press and hold the A-B/MODE button to activate playback modes (Repeat, Shuffle, etc.).

19

20

Interval Repeat

Play selected interval repeatedly while playing.

Press A-B button once to select the beginning <A> Point.

Capital

Lover’s

Press A-B button again to select the ending <B> Point.

Capital

Lover’s

A-B interval will be repeated.

Navigation mode is useful for quickly searching your files by using ID3 tag information and file name.

In case the database file is damaged or deleted, the Navigation function will use the normal "File Tree" method of searching.

1. Navigation using File Tree

Press the NAVI/MENU button to display the list of audio tracks.

The current track will also be displayed.

Push the NAVI/MENU handle toward or to select a track or folder to play.

Press the NAVI/MENU button to play the selected track or display the contents of a folder.

Once you select a folder, choose the song you wish to listen to and press the NAVI/MENU button.

Push the NAVI/MENU handle toward previous menu.

to go the upper folder or the

21

22

2. Navigation using Music Information

Navigation mode is useful for quickly searching your files by using ID3 tag information and file name.

In case the database file is damaged or deleted, the Navigation function will use the normal "File Tree" method of searching.

Press the NAVI/MENU button.

The function selection graphic displays on the LCD.

Push the NAVI/MENU handle toward or to select the searching function.

To search by artist s name

To search by album’s name

To search by genre menu

To search by title name

To search by files & folders

Press NAVI/MENU to display the details of the selected searching method.

Press the NAVI/MENU handle toward or to select searching condition.

Press the NAVI/MENU button to display the detail of the selected search condition.

If the selected search condition does not have any details, playback of matching tracks will begin immediately.

Capital

Lover’s

When you select “Select All”, all tracks matching the selected condition are played and " " (Indicating List Repeat Mode) is displayed.

To cancel List Repeat Mode, press STOP button at the stop mode.

Repeat 4 ~ 5 steps to search for other tracks.

Push to go back the previous step.

23

24

To update DB

This allows you to reconstitute DB for MP3 files based on ID3 Tag information. Artist, Album, Genre, etc.

If the iRivNavi.iDB file is damaged or deleted, files can no longer be searched by ID3 Tag information. The file can be restored from the PC.

Connect the player to the host PC.

(Refer to “Connecting the iHP-100 to the Host PC”, page 10)

Open Windows Explorer and select the iHP-100 drive.

Right click on the iHP-100.

Select “DB File update” to activate DB File update.

To add DB

You can add DB file for MP3 files based on ID3 Tag information by using the host PC.

Connect the player to the host PC.

(Refer to “Connecting the iHP-100 to the Host PC”, page 10)

After activating the explorer on the PC, select iHP-100 driver.

Click the right button of mouse after selecting MP3 files or

Folders to add to DB.

Select “Add Music(s) to DB” to activate this function.

Click “OK”.

After disconnecting the player from the host PC, you can use the Navigation function to search for songs using ID3 Tag information. (Refer to

“Disconnecting the player from the Host PC”, page 13.)

ID3 Tag information of the selected files are added to DB. In case DB file is not, new DB file

(iRivNavi.iDB) is created.

After disconnecting the player from the host PC, you can search the added music by using

ID3 Tag. (Refer to

“Disconnecting the player from the Host PC”, page 13.)

25

26

OPERATING THE FM TUNER

While playing an Audio File, Press and hold the PLAY/PAUSE button.

Push the

The FM function picture displays on the LCD.

or button to select FM frequency.

Press the STEREO/PLAY/PAUSE button to select Stereo/Mono.

Selecting Frequency

To change frequency, push the or or switch to the left or the right.

Auto Scan function: To select a station to store, press the NAVI/MENU button to exit Preset mode and find a station by using or

.

Exit Preset or

PRESET Mode : To select a station saved in memory, press the NAVI/MENU button to enter Preset mode. Select a stored station by using the or switch.

Memory Function (Save stations manually)

Select a station by pushing the or switch to the left or the right.

Push or and select the desired station to save the station to.

again

Save complete

Select CH02 will exit the memory function without saving.

Up to 20 stations can be stored.

Auto Memory Function (Save stations automatically)

Automatically select station and save them in sequential order.

Press the NAVI/MENU button to exit the Preset mode.

Press and hold the A-B/MODE button.

Up to 20 stations will be stored in channels 1~20 automatically.

Note: The Auto Memory Function may not function well in weak transmission areas.

27

28

Memory delete function (Delete saved channels)

Select the channel to be deleted at preset mode.

Press and hold the memory button.

- The next channel will appear when channel deletion is completed.

Push the MEMORY button if you want to delete the next channel also.

FM Tuner reception may vary in different areas.

While in Preset mode, Auto Scan and Auto Memory functions are not available.

When the player does not have any preset channels, EMPTY will be blinking at preset mode.

Connecting the player to external audio equipment

Connect the stereo cable to the LINE IN jack on the iHP-100 and to the LINE OUT or Headphone jack of an external audio device.

If the external audio device has an Optical output, connect an

Optical cable to the Optical Out jack on the external device and to the Optical In jack on the iHP-

100.

Recording

Press the REC button to activate recording standby mode.

LINE IN

5509MB FREE

Press A-B/MODE button or push the REC switch toward SOURCE/TYPE to select the source to record

- To record voice : MICROPHONE

- To record from an external audio device with an Optical Out: OPTICAL.

- To record from an external audio device with a standard Line Out or

Headphone jack: LINE-IN

LINE IN

5509MB FREE

Push the MENU/NAVI handle toward or

, or push the REC button on the remote control toward SOURCE/TYPE to select FILE TYPE to save.

LINE IN

5509MB FREE

29

30

Push the MENU/NAVI handle toward or

, or push the REC button on the remote control toward BITRATE to select BITRATE TYPE to set recording quality.

LINE IN

5509MB FREE

Push the REC button to start recording.

When recording from an external audio device, be sure to start the playback on that device when recording on to the iHP-100.

RECORDING

LINE IN

01:10

AUDIO000.MP3

5509MB FREE

NOTE

Volume level can not be controlled on the iHP-100 while recording from an external device.

While recording, press (STOP/PWR OFF) to stop recording and switch to recording standby mode. Press the REC button again to begin recording to a new file.

RECORDING

LINE IN

01:10

AUDIO000.MP3

5509MB FREE

LINE IN

AUDIO000.MP3

5509MB FREE

Press the REC button to pause recording. And press the REC button again to restart FM recording.

To pause recording

During FM recording, press REC button to pause recording, press REC button again to start recording.

To stop recording

At recording standby mode, press and hold button to go previous mode.

LINE IN

5509MB FREE

Pressing REC during FM reception will begin recording.

There is no standby mode for FM recording.

Recorded files are stored in folders matching the source name from where the audio was recorded.

- Line In : ROOT\RECORD\AUDIO\AUDIOXXX.MP3(WAV)

- Mic In : ROOT\RECORD\VOICE\VOICEXXX.MP3(WAV)

Recording is automatically stopped if:

- The iHP-100's memory is full.

- when the recorded MP3 file size is over 195MB

- when the recorded WAV file size is over 795MB

- The recorded time is longer than 5 hours.

- The battery is low.

To play the recorded file

Press button to play the recorded file at the recording standby mode.

31

32

The iHP-100 has various playback modes.

Please refer to the function controls (see page 40 for details) for user-defined configurations.

Capital

Lover’s

When the A-B/MODE button is pushed, the playback mode changes and an icon indicating the mode is displayed.

REPEAT

Play a single track repeatedly. Press or to play the previous or next track.

Play all tracks in the folder and stop.

Play all tracks in the folder repeatedly.

Play all tracks in the player repeatedly.

SHUFFLE

Randomly play all tracks in the player and stop.

Play a single track repeatedly. Press random track.

or to switch to a new

Randomly play all tracks in the folder and stop. Press switch to a new random folder.

or to

Randomly play all tracks in the folder repeatedly.

Randomly play all tracks in the player repeatedly.

INTRO

INTRO: Play beginning 10 seconds of each track in sequential order.

INTRO HIGHLIGHT: Plays 10 seconds from 1 minute into each track in sequential order. You can set this function in the MENU function.

EQ

You can change the EQ to match your music style.

- Normal / Rock / Jazz / Classic / Ultra Bass / User EQ

You can set the EQ function by using Function Menu.

Refer to page 41.

Capital

Lover’s

33

34

Configuration

Function Control is subject to change with different firmware versions.

Users can configure their own settings.

General

Beep Volume

Resume

Fade In

Language

Tuner Region

Load Default

Firmware Upgrade

DB Scan

Control

Scan Speed

Scroll Type

Optical Out

Mode

Repeat

Shuffle

Intro

Display

Back Light (Battery)

Back Light (Adapter)

LCD Contrast(Main)

LCD Contrast(Remote)

Tag Information

Time

Sound

Sound Balance

EQ

Bass Boost

Treble Boost

Timer

Sleep Timer

Stop Power Off

Record

Record Type

Bitrate

AGC

Menu Operation

Press and hold the NAVI/MENU button to display the menu system.

It is composed of 7 main menus with sub-menus.

MAIN MENU SUB MENU

Window for SUB MENU

SETTING

When you select a sub menu, you can set your preference to be displayed.

Scroll between Menu

Press and hold the NAVI/MENU button to display the main menus. Push volume , to scroll between main menus, press the

NAVI/MENU button to select sub menu.

From Main Menu to Sub Menu

Use the , to select a sub menu, push the NAVI/MENU button to display the contents of that sub menu.

Change Settings by user

Use the , or ( , ) to change the settings. Push NAVI/MENU to save the setting.

Exit Sub Menu

Press menu.

to display the initial setting

Exit Main Menu

Press at the initial setting menu to exit Function Control Mode.

35

36

GENERAL

BEEP VOLUME

Set beep volume level to 0 / 1 / 2 / 3 step.

RESUME

When ON, player resumes to previous place in song after STOP or Power OFF.

FADE IN

When activated, volume increases gradually at playback mode to prevent sudden loudness.

LANGUAGE (Supports 38 languages)

Song title and ID3 tag information is dependent on the version of the PC operating system that was used to create it. (For example, if a MP3 files is created in a Korean version of Windows, the language setting should be Korean for proper title display)

TUNERREGION

You can set the FM frequency and step according to your area.

Set them to fit your region to receive FM Radio.

If tuner region is newly set, the old preset stations is deleted.

LOAD DEFAULT VALUE

Initialize all settings to original factory setting.

FIRMWARE UPGRADE

You can upgrade the player’s Firmware.

Refer to page 43 for details.

DB SCAN

Turn the Navigation to search by using ID3 Tag on or off.

When you select "YES" on the DB SCAN, it takes several seconds until power is on according to the quantity of files stored on the player.

DISPLAY

BACK LIGHT (Battery)

You can adjust the time that the Backlight stays on while the player is operated using the battery built in the player.

Adjust Back Light by OFF / 3 sec / 5 sec / 10 sec.

BACK LIGHT (Adapter)

You can adjust the time that the Backlight stays on while the player is operated using AC adapter.

Adjust Back Light by OFF / 3 sec / 5 sec / 10 sec /

Always. If Always is selected, backlight is always on.

37

38

LCD CONTRAST (Main)

Adjust LCD contrast of the player.

LCD CONTRAST (Remote)

Adjust LCD contrast of remote control.

TAG INFORMATION

ON : Displays track with ID3 tag information and you can change the configuration of Tag information.

OFF : Displays track with file name.

The change will take affect when the next track is played.

TIME

Normal : display elapsed time.

Remain : display remaining time.

Note : In case of VBR MP3 file, the remaining time may display inaccurately.

TIMER(Set Auto Power Off)

SLEEP POWEROFF

Automatically power off after fixed time

(Time range can be set from 1 to 99 minutes).

When the power is off, the sleep power off setting goes back to 0.

STOP POWEROFF

Automatically turns power off at stop mode.

(Time range can be made from 1~60 minutes.)

CONTROL

SCAN SPEED

The fast scan speed can range from

OF F / 1x / 2x / 4x.

SCROLL TYPE

Adjust scroll speed by

1x / 2x / 4x / Vertical / Horizontal.

Vertical : The scroll goes up and down

Horizontal : The scroll goes from the left to the right.

OPTICAL

ON: The optical output will be enabled starting with the next track.

Caution : Do not look directly into the Optical

Out jack. The laser signal can be harmful to your eyes.

39

40

MODE (PLAYBACK MODE)

R EPEAT MODE / SHUFFLE MODE

You can select a file or directory to listen to repeatedly.

You can play the selected mode simultaneously by setting REPEAT MODE / SHUFFLE MODE respectively.

(Refer to page 32 for details about each mode)

INTRO MODE

INTRO MODE plays the beginning 10 seconds of each track.

INTRO HIGHLIGHT plays 10 seconds from 1 minute into each track in sequential order.

SOUND

SOUND BALANCE

Balance your sound to the right or left or keep it in the center according to your preference. When Sound

Balance bar is moved to L (Left, 20),the sound outputs at the left earphone. When the bar is moved to

R (Right, 20) the sound outputs at the right earphone.

The default value is 0 the sound outputs the same level at both earphones.

EQ

You can select 6 EQ.

EQ is selected as follows :

Normal Rock Jazz Classic Ultra Bass

User EQ

BASS BOOST

Bass Boost level is from 0 to 24dB by 2 step.

TREBLE BOOST

Treble Boost level is from 0 to 6dB by 2 step.

41

42

REC MODE

RECORD TYPE

Adjust the format to record.

You can select one of MP3 or WAV.

You can also set it by using recording standby mode.

or button at

BIT RATE

You can adjust recording quality by setting

BIT RATE.

The higher BIT RATE is, the better the recorded sound is and the lower it is, the worse the recorded sound is.

This like to more clearly state that A higher BIT RATE increases file size and shortens recording space available.

The Bit Rate can range from 40Kbps to 320kbps.

You can also set it by using or button at recording standby mode.

AGC

ON : When voice recording, the level is automatically controlled to help avoid distortion in the recording. Also, recordings from long distances will be improved.

AGC function is operated at voice recording mode.

Upgrade your firmware at www.iriveramerica.com.

What is FIRMWARE?

It is the operating system that works in the iHP-100.

iRiver provides you with the latest and best features through Firmware Upgrade.

Visit www.iriveramerica.com to upgrade your Firmware.

How to UPGRADE?

1. Download the latest firmware upgrade file from www.iriveramerica.com

2. Extract the file and save it to the ROOT of the iHP-100.

3. Connect the AC adapter to the iHP-100.

(Caution: Only upgrade the firmware on the iHP-100 with the AC adapter connected.)

4. Select the Firmware Upgrade on the MENU.

5. Click the NAVI/MENU button after selecting YES on the Alert window.

6. Check whether your LCD window shows “Firmware Upgrading...”

7. Do not turn the player off or disconnect the player from the PC until the Firmware

Upgrading is done. When the power goes off automatically, the upgrade is done.

After turning the player on, confirm the Firmware Upgraded operating.

43

44

Supported file types will have the extension MP3, WMA, ASF and

WAV.

Folders and files are sorted in alphabetical order.

The iHP-100 can store 1,000 folders and 5,000 files (Audio or data).

Track information is displayed either filename or ID3 TAG information.

Physical shock can cause bad sectors on the Hard Disk inside the iHP-100. This can be recovered using Windows Scandisk.

CAUTION!

Some earphone plugs may not fit the remote properly. Use the included earphone extention if your headphones will not plug in properly.

SAFETY

Avoid dropping or impacting the player.

The player is designed to operate while walking or running, but dropping or excessively impacting the player may cause damage.

Avoid contacting the player with water.

Damage to the internal parts of the player may occur if the player comes into contact with water. If your player gets wet, dry the outside with a soft cloth as soon as possible.

Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, unleveled surface, or in a car with its windows closed.

Keep the player away from a material with strong magnetic forces.

This can cause malfunction in the Hard Drive.

On Headphones and Earphones

Road Safety

Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas.

It can also be potentially dangerous to play your headsets at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations.

Preventing hearing damage

Avoid using headphones/earphones at high volume. Hearing experts advise against listening to continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.

Consideration for others

Keep the volume at a moderate level. This will allow you to hear outside sound and to be considerate of the people around you.

45

?@@??

?@@??

N@@??

?@@??

?@@??

?@@??

?@@??

?@@??

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

?

?

?

?

@@g?@@?e?

@@@@@@@@@@@?e?

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

?

?

?

?

@@@@@@@@@6X?e?

@@@@@@@@@@1?e?

@@g?@@?e?

@@g?@@?e?

?

?

?

?

@@g?@@?e?

@@g?@@?e?

@@@@@@@@@0Y?e?

@@hf?

@@hf?

@@hf?

?

?

?

?

?O2@g?

@@@@g?

@@g?

@@g?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g?

@@g?

@@g@@e?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@@@@@@@@@e?

@@@@@@@@@@e?

@@he?

?@@@@@@@@@1??

@@he?

@@@@@@@@@?e?

@@he?

?@@?f?@@??

@@he?

?7@@@@@@@@@??

?@@?f?@@??

?@@?f?@@??

?@@?f?@@??

?@@?f?@@??

?@@?f?@@??

?V4@@@@@@@@??

?@@?f?@@??

?@@?f?@@??

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

?

?

?

?

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

@@g?@@?e?

V4@@@@@@@0Y?e?

?

?

?

?

W2@@@@@@@6X?e?

7@@@@@@@@@1?e?

@@g?@@?e?

@@hf?

?

?

?

?

@@hf?

@@@@@@@@@@@?e?

?@@?e?

?@@?e?

@@g?@@?e?

@@g?@@?e?

?

?

@@h?

@@L?g?

@@@?g?

?J@@@Lg?

?

?

?

?

J@@?@@L?f?

7@5?3@1?f?

?J@@e?@@Lf?

?@@@@@@@@@f?

7@H?fN@1?e?

V4@@@@@@@0Y?e?

?

?

?

?

?

?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@@@@@@@@@e?

@@@@@@@@@5e?

W&@(Y?e?

7@(Yf?

?J@@Y?f?

?7@@@6K?e?

@@e?

@@e?

@@L?e?J@@e?

3@)KeO&@5e?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@@@@@@@@?e?

@@@@@@@@@?e?

7@H?e?

?J@5f?

J@@?f?

7@5?f?

?7@Hg?

?@@?g?

?@@?g?

?O2@g?

@@@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

?7@@@@@@@@1??

@@g@@e?

@@g@@e?

?@@@@@@@@@@??

@@g@@e?

?@@??

?@@?f?@@??

?@@?f?@@??

@@@@@@@@@@e?

@@@@@@@@@@e?

@@he?

@@he?

@@he?

@@@@@@@@@?e?

@@he?

@@he?

@@he?

W2@@@@6Xe?

?W&@@@@@@)X??

?@@HfN@@??

J@@??

?O&@5??

W&@(M?e?

?J@(Y?f?

W&@Hg?

?7@@Y?g?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@@@@@@@@@e?

@@@@@@@@@5e?

W&@(Y?e?

7@(Yf?

?J@@Y?f?

?7@@@6K?e?

@@e?

@@e?

@@L?e?J@@e?

3@)KeO&@5e?

@@@??

@@@??

@@@@@@@@@?e?

@@@@@@@@@?e?

7@H?e?

?J@5f?

J@@?f?

7@5?f?

?J@5g?

?7@Hg?

?@@?g?

@@@??

?@@?g?

?O2@g?

@@@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

?O2@g?

@@@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@@??

@@@??

@@@??

@@@??

@@@??

?O2@g?

@@@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

W2@@@@@@6Xe?

7@@@@@@@@1e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@g@@e?

@@h?

@@L?g?

@@@?g?

?J@@@Lg?

?

?

?

?

J@@?@@L?f?

7@5?3@1?f?

?J@@e?@@Lf?

?@@@@@@@@@f?

7@H?fN@1?e?

@@h?@@?e?

@@h?@@?e?

@@h?@@?e?

@@g?@@?e?

?

?

?

?

@6X?gW2@?e?

@@)Xf?W&@@?e?

@@@@)X?W&@@@@?e?

@@V'@)?&@(Y@@?e?

@@eN@@(Y??@@?e?

@@e?@0Ye?@@?e?

@@h?@@?e?

@@@@@@@@@??@@?@@f

@@@@@@@@@??@@?@@f

@??@@?e?@@?@@f

@??@@??@@@@?@@f

@??@@?e?@@?@@f

@??@@?e?@@?@@f

@@@@@@@@@??@@?@@f @@@@@@@@@??@@?@@f

?@@?@@f

?@@?@@f

?@@?@@f

?@@?@@f

?@@?@@f

?@@?@@f

?@@?@@f

@@@6X?f@@g

@@@@1?f@@g

?7@??N@1f@@g

?@@?e@@f@@g

?@@?e@@f@@g

?N@?O&@Hf@@g

@@@@5?f@@g @@@0Y?f@@g

@@g

@@g

@@g

@@g

@@g

@@g

@@g

?@@@@@@@@@e?@g

?@@@@@@@@@e?@g

@@g?@g

?J@@L?f?@g

W&@@)Xf?@g

?J@(MI'@)Xe?@g

?'@HeV'@,e?@g ?V'?e?V+Ye?@g

?@g

?@g

?@g

?@g

?@g

?@g

?@g

?W&?e?

W&@?e?

W&@@@?e?

7@@@@?e?

?J@(Y@@?e?

O&@H?@@?e?

7@(Me?@@?e?

@@H?e?@@?e?

@@@@@@@@@@@??

?@@?e?

?W2@@@@@@6X??

?7@@@@@@@@1??

?@@?f?@@??

?@@?f?@@??

?@@?f?@@??

?@@?f?@@??

?V4@@@@@@@@??

?@@??

?@@?f?@@??

W&(Y?

7@H??

?J@He?

?7@?e?

?@@?e?

?@@?e?

?@@?e?

?@@?e?

?@@?e?

?N@Le?

3@L??

V')X?

?O2@g?

@@@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

@@g?

?@@@?

?@@@?

W5?

?O2@g?

@@@@g?

@@g?

@@g?

?V')X?e?

N@1?e?

?N@)X??

3@1??

@@g?

@@g?

@@g?

@@g?

@@g?

?@@??

?@@??

?@@??

J@@??

?J@(Y??

J@5?e?

?W&(Y?e?

46

Remote Control

Headphones and foam covers

User Manual/

Warranty card

AC Adapter

Install CD

Line in / out Connection

Cable

Earphone Extension Cable

USB Cable

Accessories subject to change without notice and may vary from image shown.

47

48

Category

Item Specifications

Audio

Frequency/Range

Headphone output

S/N ratio

20Hz~20KHz

20mW(L) +20mW(R) at 16

Max. Volume

90dB(L), 90dB(R)(When a MP3)

Audio

(FM TUNER)

File Support

Power Supply

General

Frequency Characteristics

No. of Channels

2dB

STEREO(L+R)

FM Frequency range

87.5MHz~108MHz

20mW(L) +20mW(R) at 16 Max.

Headphone Output

S/N ratio

Antenna

Volume

50dB

Headphone/Earphone-Cord Antenna

MPEG 1/2/2.5 Layer 3, WMA , ASF,

File TYPE

Bit Rate

Tag

AC Adapter

Dimension

Weight

Operational Temperature

WAV

32Kbps ~ 320Kbps

ID3 VI , ID3 V2 2.0, ID3 V2 3.0

DC 5V , 2A

Approx. 60(W) x 19(D) x 105(H) mm

Approx. 160 g

0 ~ 40

Max.

Playtime

MP3 / WMA / ASF

Approx. 16 hours

Federal Communications Commission (FCC)

The device manufactured and found to comply with limits for a Class B computing device according to the specifications in FCC rules Part 15.

Operation is subject to the following two conditions;

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

3. If your device needs repairs, you must arrange for the manufacturer to make them if you are to keep the device's FCC registration valid.

This equipment, like other electronic equipment, generates and uses radio frequency energy. If not installed and used according to the instructions in this manual, this equipment may cause interference with your radio and television reception.

If you think this equipment is causing interference with your radio or television reception, try turning the equipment off and on. If the interference problems stop when the equipment is switched off, then the equipment is probably causing the interference. You may be able to correct the problem by doing one or more of the following:

- Adjust the position of the radio or TV antenna

- Move away the device from the radio or TV

If necessary, consult your dealer or an experienced radio or television technician. You may find this booklet helpful:"How to Identify and Resolve

Radio and TV Interference Problems"(Stock No. 004-000-00345-4), prepared by the FCC and available from the U.S Government Printing Office,

Washington, DC 20402. See individual devices FCC ID and registration numbers.

For the customers in Europe

The CE mark on the player is valid only for products marketed in the European Union.

49