USER’S MANUAL
MEDIA CENTER 730N (RHR)
Chrysler Group LLC
12RHR-526-AA
First Edition
Printed in U.S.A.
USER AGREEMENT
NOTICE:
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
NOTICE:
This device complies with Part 15 of the FCC Rules [and
with RSS-210 of Industry Canada].
Modifications not expressly approved by the radio
manufacturer could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipNOTICE:
ment generates, uses and can radiate radio frequency
Changes or modifications made to this equipment not energy and, if not installed and used in accordance with
expressly approved by the radio manufacturer may void the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
the FCC authorization to operate this equipment.
interference will not occur in a particular installation.
FCC Declaration
This device complies with Part 15 of the FCC Rules. If this equipment does cause harmful interference to
Operation is subject to the following two conditions: (1) radio or television reception, which can be determined by
this device may not cause harmful interference, and (2) turning the equipment off and on, the user is encouraged
this device must accept any interference received, includ- to try to correct the interference by one or more of the
Operation is subject to the following two conditions: this
device may not cause harmful interference, and this
device must accept any interference received, including
interference that may cause undesired operation.
ing interference that may cause undesired operation.
following measures: - Increase the separation between the use of wireless radios may be restricted in some
the equipment and receiver. - Consult the dealer or an situations or environments, such as aboard airplanes. If
you are unsure of restrictions, you are encouraged to ask
experienced radio technician for help.
for authorization before turning on the wireless radio.
Safety Information
End User License Agreement NAVTEQ
Exposure to Radio Frequency Radiation
The radiated output power of the this internal wireless
radio is far below the FCC radio frequency exposure
limits. Nevertheless, the wireless radio shall be used in
such a manner that the radio is 20 cm or further from the
human body.
PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE NAVTEQ
DATABASE
NOTICE TO THE USER
THIS IS A LICENSE AGREEMENT - AND NOT AN
AGREEMENT FOR SALE – BETWEEN YOU AND
NAVTEQ B.V. FOR YOUR COPY OF THE NAVTEQ
NAVIGABLE MAP DATABASE, INCLUDING ASSOCIATED COMPUTER SOFTWARE, MEDIA AND EXThe radio manufacturer believes the internal wireless PLANATORY PRINTED DOCUMENTATION PUBradio is safe for use by consumers. The level of energy LISHED BY NAVTEQ (JOINTLY ”THE DATABASE”). BY
emitted is far less than the electromagnetic energy emit- USING THE DATABASE, YOU ACCEPT AND AGREE
ted by wireless devices such as mobile phones. However, TO ALL TERMS AND CONDITIONS OF THIS END
The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific
community.
USER LICENSE AGREEMENT (”AGREEMENT”). IF
YOU DO NOT AGREE TO THE TERMS OF THIS
AGREEMENT, PROMPTLY RETURN THE DATABASE,
ALONG WITH ALL OTHER ACCOMPANYING ITEMS,
TO YOUR SUPPLIER FOR A REFUND.
LICENSE GRANT
OWNERSHIP
LIMITATIONS ON USE
The Database and the copyrights and intellectual property or neighboring rights therein are owned by
NAVTEQ or its licensors. Ownership of the media on
which the Database is contained is retained by NAVTEQ
and/or your supplier until after you have paid in full any
amounts due to NAVTEQ and/or your supplier pursuant
to this Agreement or similar agreement(s) under which
goods are provided to you.
The Database is restricted for use in the specific system
for which it was created. Except to the extent explicitly
permitted by mandatory laws (e.g. national laws based
on the European Software Directive (91/250) and the
Database Directive (96/9)), you may not extract or reutilize substantial parts of the contents of the Database nor
reproduce, copy, modify, adapt, translate, disassemble,
decompile, reverse engineer any portion of the Database.
If you wish to obtain interoperability information as
meant in (the national laws based on) the European
Software Directive, you shall grant NAVTEQ reasonable
NAVTEQ grants you a non-exclusive license to use the
Database for your personal use or, if applicable, for use in
your business’ internal operations. This license does not
include the right to grant sublicenses.
opportunity to provide said information on reasonable
terms, including costs, to be determined by NAVTEQ.
TRANSFER OF LICENSE
You may not transfer the Database to third parties, except
when installed in the system for which it was created or
when you do not retain any copy of the Database, and
provided that the transferee agrees to all terms and
conditions of this Agreement and confirms this in writing
to NAVTEQ. Multi-disc sets may only be transferred or
sold as a complete set as provided by NAVTEQ and not
as subset thereof.
LIMITED WARRANTY
NAVTEQ warrants that, subject to the warnings set out
below, for a period of 12 months after acquisition of your
copy of the Database, it will perform substantially in
accordance with NAVTEQ’s Criteria for Accuracy and
Completeness existing on the date you acquired the
Database; these criteria are available from NAVTEQ at
your request. If the Database does not perform in accordance with this limited warranty, NAVTEQ will use
reasonable efforts to repair or replace your nonconforming copy of the Database. If these efforts do not lead to
performance of the Database in accordance with the
warranties set out herein, you will have the option to
either receive a reasonable refund of the price you paid
for the Database or to rescind this Agreement. This shall
be NAVTEQ’s entire liability and your sole remedy
against NAVTEQ. Except as expressly provided in this
section, NAVTEQ does not warrant nor make any representations regarding the use of results of the use of the
Database in terms of its correctness, accuracy, reliability,
or otherwise. NAVTEQ does not warrant that the Database is or will be error free. No oral or written information or advice provided by NAVTEQ, your supplier or
any other person shall create a warranty or in any way
increase the scope of the limited warranty described
above. The limited warranty set forth in this Agreement
does not affect or prejudice any statutory legal rights that revenue, data, or use, incurred by you or any third party
you may have under the legal warranty against hidden arising out of your use of the Database, whether in an
action in contract or tort or based on a warranty, even if
defects.
NAVTEQ has been advised of the possibility of such
If you did not acquire the Database from NAVTEQ
damages. In any event NAVTEQ’s liability for direct
directly, you may have statutory rights against the person
damages is limited to the price of your copy of the
from whom you have acquired the Database in addition
Database.
to the rights granted by NAVTEQ hereunder according to
the law of your jurisdiction. The above warranty of THE LIMITED WARRANTY AND LIMITATION OF LINAVTEQ shall not affect such statutory rights and you ABILITY, SET FORTH IN THIS AGREEMENT, DO NOT
may assert such rights in addition to the warranty rights AFFECT OR PREJUDICE YOUR STATUTORY RIGHTS
granted herein.
WHERE YOU HAVE ACQUIRED THE DATABASE
OTHERWISE THAN IN THE COURSE OF A BUSINESS.
LIMITATION OF LIABILITY
The price of the Database does not include any consid- WARNINGS
eration for assumption of risk of consequential, indirect
or unlimited direct damages which may arise in connection with your use of the Database. Accordingly, in no
event shall NAVTEQ be liable for any consequential or
indirect damages, including without limitation, loss of
The Database may contain inaccurate or incomplete
information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to
incorrect results. The Database does not include or reflect
information on - inter alia - neighborhood safety; law
enforcement; emergency assistance; construction work;
road or lane closures; vehicle or speed restrictions; road
slope or grade; bridge height, weight or other limits; road
or traffic conditions; special events; traffic congestion; or
travel time.
GOVERNING LAW
This Agreement shall be governed by the laws of the
jurisdiction, in which you reside at the date of acquisition
of the Database. Should you at that moment reside
outside the European Union or Switzerland, the law of
the jurisdiction within the European Union or Switzerland where you acquired the Database shall apply. In all
other cases, or if the jurisdiction where you acquired the
Database cannot be defined, the laws of the Netherlands
shall apply. The courts competent at your place of
residence at the time you acquired the Database shall
have jurisdiction over any dispute arising out of, or
relating to this Agreement, without prejudice to
NAVTEQ’s right to bring claims at your then current
place of residence.
End-User License Agreement Gracenote
USE OF THIS PRODUCT IMPLIES ACCEPTANCE OF
THE TERMS BELOW.
Gracenote威 MusicID威 Terms of Use
This device contains software from Gracenote, Inc. of
Emeryville, California (“Gracenote”). The software from
Gracenote (the “Gracenote Software”) enables this application to do online disc identification and obtain musicrelated information, including name, artist, track, and
title information (“Gracenote Data”) from online servers
(“Gracenote Servers”) and to perform other functions.
You may use Gracenote Data only by means of the
intended End-User functions of this device.
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for your own
personal noncommercial use only. You agree not to
assign, copy, transfer or transmit the Gracenote Software
or any Gracenote Data to any third party. YOU AGREE
NOT TO USE OR EXPLOIT GRACENOTE DATA, THE
GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.
You agree that Gracenote, Inc. may enforce its rights
under this Agreement against you directly in its own
name.
The Gracenote MusicID Service uses a unique identifier
to track queries for statistical purposes. The purpose of a
randomly assigned numeric identifier is to allow the
Gracenote MusicID service to count queries without
knowing anything about who you are. For more inforYou agree that your non-exclusive license to use the mation, see the web page for the Gracenote Privacy
Gracenote Data, the Gracenote Software, and Gracenote Policy for the Gracenote MusicID Service.
Servers will terminate if you violate these restrictions. If
The Gracenote Software and each item of Gracenote Data
your license terminates, you agree to cease any and all
are licensed to you “AS IS.” Gracenote makes no repreuse of the Gracenote Data, the Gracenote Software, and
sentations or warranties, express or implied, regarding
Gracenote Servers. Gracenote reserves all rights in
the accuracy of any Gracenote Data from in the
Gracenote Data, the Gracenote Software, and the
Gracenote Servers. Gracenote reserves the right to delete
Gracenote Servers, including all ownership rights. Under
data from the Gracenote Servers or to change data
no circumstances will Gracenote become liable for any
categories for any cause that Gracenote deems sufficient.
payment to you for any information that you provide.
No warranty is made that the Gracenote Software or
CD and music-related data from Gracenote, Inc., copyright © 2000-2007 Gracenote. Gracenote Software, copyright © 2000-2007 Gracenote. This product and service
may practice one or more of the following U.S. Patents:
#5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192,
#6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Some services supplied under license
GRACENOTE DISCLAIMS ALL WARRANTIES EXfrom Open Globe, Inc. for U.S. Patent: #6,304,523.
PRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
Gracenote and CDDB are registered trademarks of
TO, IMPLIED WARRANTIES OF MERCHANTABILITY,
Gracenote. The Gracenote logo and logotype, and the
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
⬙Powered by Gracenote⬙ logo are trademarks of
NON-INFRINGEMENT. GRACENOTE DOES NOT
Gracenote.
WARRANT THE RESULTS THAT WILL BE OBTAINED
BY YOUR USE OF THE GRACE-NOTE SOFTWARE OR
ANY GRACENOTE SERVER. IN NO CASE WILL
GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST
PROFITS OR LOST REVENUES.
Gracenote Servers are error-free or that functioning of
Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with
new enhanced or additional data types or categories that
Gracenote may provide in the future and is free to
discontinue its online services at any time.
© Gracenote 2007 Version 2.2
MEDIA CENTER 730N (RHR)
CONTENTS
䡵 Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . 1
䡵 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
▫ Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
▫ Safety References . . . . . . . . . . . . . . . . . . . . . . 3
▫ Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . 3
▫ System Care . . . . . . . . . . . . . . . . . . . . . . . . . . 3
䡵 General Handling . . . . . . . . . . . . . . . . . . . . . . . 7
▫ User Interface Elements . . . . . . . . . . . . . . . . . . 7
▫ Steering Wheel Mounted Controls
(If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . 10
▫ Audio Settings . . . . . . . . . . . . . . . . . . . . . . . 11
䡵 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . 13
▫ Soft-Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
▫ Disclaimer For Navigation Radio . . . . . . . . . . 13
▫ Change The Language . . . . . . . . . . . . . . . . . . 14
▫ Set The Time . . . . . . . . . . . . . . . . . . . . . . . . 14
▫ Store Radio Presets . . . . . . . . . . . . . . . . . . . . 15
12
MEDIA CENTER 730N (RHR)
▫ Connect Bluetooth威 Devices . . . . . . . . . . . . . . 17
䡵 Uconnect™ Multimedia (Remote Devices) . . . . . 92
▫ Set Default Country And/Or State . . . . . . . . . 19
▫ AUX Mode (If Equipped) . . . . . . . . . . . . . . . 92
▫ Enter Home Address . . . . . . . . . . . . . . . . . . . 20
▫ Bluetooth威 Audio Streaming Mode . . . . . . . . . 98
▫ Change Home Address . . . . . . . . . . . . . . . . . 23
▫ Sirius Backseat TV™ (If Equipped) . . . . . . . . 101
▫ Voice Command Tutorial . . . . . . . . . . . . . . . . 26
▫ Video Entertainment System (VES)™ . . . . . . 102
▫ Uconnect™ Phone Tutorial . . . . . . . . . . . . . . 26
▫ USB Connector . . . . . . . . . . . . . . . . . . . . . . 104
䡵 Uconnect™ Multimedia (Radio) . . . . . . . . . . . . 27
▫ AUX Mode . . . . . . . . . . . . . . . . . . . . . . . . 108
▫ Radio Mode . . . . . . . . . . . . . . . . . . . . . . . . . 27
䡵 Voice Command . . . . . . . . . . . . . . . . . . . . . . 110
▫ Sirius Satellite Travel Link . . . . . . . . . . . . . . . 38
▫ Voice Command Operation . . . . . . . . . . . . . 110
▫ Radio Settings . . . . . . . . . . . . . . . . . . . . . . . 48
䡵 Uconnect™ Phone . . . . . . . . . . . . . . . . . . . . . 121
䡵 Uconnect™ Multimedia (Media) . . . . . . . . . . . . 54
▫ Phone System Setup – Pairing . . . . . . . . . . . 122
▫ Disc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 54
䡵 Uconnect™ GPS Navigation . . . . . . . . . . . . . . 127
▫ Hard Disk Drive Mode (HDD) . . . . . . . . . . . . 66
▫ General Notes . . . . . . . . . . . . . . . . . . . . . . 127
MEDIA CENTER 730N (RHR)
13
▫ Navigation Main Menu . . . . . . . . . . . . . . . . 128
▫ User Data Backup . . . . . . . . . . . . . . . . . . . . 197
▫ Destination Input By POI . . . . . . . . . . . . . . 131
▫ Database Updates . . . . . . . . . . . . . . . . . . . . 197
▫ Route Guidance . . . . . . . . . . . . . . . . . . . . . 158
䡵 Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . 198
▫ Navigation Options . . . . . . . . . . . . . . . . . . . 168
▫ Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
▫ Navigation Default Settings . . . . . . . . . . . . . 173
▫ Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
▫ Map Viewer . . . . . . . . . . . . . . . . . . . . . . . . 175
▫ HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
▫ Stop Over . . . . . . . . . . . . . . . . . . . . . . . . . 177
▫ iPod/Digital Device Control . . . . . . . . . . . . 198
▫ Trip Planner . . . . . . . . . . . . . . . . . . . . . . . . 178
▫ Navigation . . . . . . . . . . . . . . . . . . . . . . . . . 199
▫ Realtime Traffic By Sirius Satellite Radio . . . . 183
▫ Voice Command . . . . . . . . . . . . . . . . . . . . . 199
▫ Address Book . . . . . . . . . . . . . . . . . . . . . . . 188
▫ Uconnect™ Phone . . . . . . . . . . . . . . . . . . . 199
䡵 System Information . . . . . . . . . . . . . . . . . . . . 197
䡵 Glossary Of Terms . . . . . . . . . . . . . . . . . . . . . 200
MEDIA CENTER 730N (RHR)
1
SAFETY GUIDELINES
• Glance at the screen only when necessary and safe to
Ensure that all persons read this manual carefully before
do so. If prolonged viewing of the screen is necessary,
using the navigation system. It contains instructions on
pull over at a safe location.
how to use the system in a safe and effective manner.
• Road conditions and regulations take precedence over
information contained on the map display. Observe
WARNING!
actual traffic restrictions and circumstances when
driving.
Please read and follow these safety precautions.
Failure to do so may result in injury or property
• Stop use immediately if a problem occurs. Failure to
damage.
do so may cause injury or damage to the product.
Return it to your authorized dealer to repair.
• When using the navigation system to route you to an
emergency facility, contact the facility to verify its • There may be situations where the navigation system
erroneously displays the vehicle’s location. Use your
location.
own driving judgement in this situation, taking into
• Not all emergency service locations are contained in
account current driving conditions. Please be aware
the database. Please use your own judgement and ask
that in this situation the navigation system should
for directions in such situations.
automatically correct the vehicle position within a few
minutes.
2
MEDIA CENTER 730N (RHR)
• Make certain that the volume level of the system is set • The law in some states prohibits the Front Seat DVD
to a level that still allows you to hear outside traffic
Viewer even while in park. As a result, it may be
and emergency vehicles.
disabled prior to delivery to you. If you move to
another state, you should consult your dealer for the
• The map database is designed to provide you with
proper enable/disable setting for your new state.
route suggestions and does not take into account the
Currently all states prohibit front seat video viewers
relative safety of suggested route or factors that may
except for: Arkansas, Delaware, Georgia, Hawaii,
affect the time required to reach your destination. Use
Idaho, Iowa, Kentucky, Mississippi, Missouri, Monyour own personal judgement if the navigation system
tana, North Dakota and Ohio.
is unable to provide you with an alternative route.
MEDIA CENTER 730N (RHR)
INTRODUCTION
3
Intended Use
Generally recognized rules of navigation technology
Warnings
were maintained during the development and manufacThis manual contains WARNINGS against operating
ture of the RHR navigation system (NTG4 Refresh).
procedures that could result in an accident or bodily
When using this product, be aware of state-specific
injury. If you do not read the entire manual you may miss
norms and guidelines.
important information. Observe all WARNINGS!
Visit www.chrysler.com, www.jeep.com, www.dodgeThe information given in this manual is subject to
.com or www.ramtrucks.com for updates, additional
change.
information, compatible phones, etc.
Safety References
System Care
Before operating this navigation system for the first time,
please read this manual carefully. Note the safety precau- Software Update
tions described in this manual. If you have any questions, Both navigation data and Gracenote威 data are software
updatable. Visit www.chrysler.com, www.jeep.com, wwplease contact the vehicle manufacturer.
w.dodge.com, www.ramtrucks.com or contact your authorized dealer for the latest available software.
4
MEDIA CENTER 730N (RHR)
Keep drinks, rain, and other sources of moisture away
Safe Usage of the Radio Navigation System
Read all instructions in this manual carefully before from your radio. Besides damage to your radio, moisture
using your radio system to ensure proper usage.
can cause electric shocks with any electronic device.
Your radio is a sophisticated electronic device. Do not let
young children use your radio unsupervised.
NOTE: In a convertible vehicle, the system performance
may be compromised with roof top down.
Permanent hearing loss may occur if you play your music Connections
at the highest volume. Exercise caution when setting the Never force any connector into the ports of your radio.
Make sure your connectors are the correct shape and size
volume on your radio.
before you connect.
Driving is a complex activity that requires your full
attention. If you’re engaged in driving or any activity that Any attached cable should be routed so that it will not
requires your full attention, we recommend that you not apply any pressure to the connection.
use your radio navigation system.
Do not use a USB device which will interfere with the
NOTE: Many features of this radio are speed depen- operation of opening the display.
dent. For your own safety it is not possible to use the
Touch Screen
touch screen keyboard to enter a name (e.g., street name),
Do not touch the screen with any hard or sharp objects
while the vehicle is in motion. Pull over at a safe location
which could scratch the touch screen surface (pen, USB
to complete your task.
stick, jewelry, etc.)!
MEDIA CENTER 730N (RHR)
5
NOTE: It is possible to use a plastic stylus for press Do not insert anything other than the supported CD/
DVD formats. See Disc Mode section for information on
screen enabled devices such as PDA and Pocket PCs.
supported CD/DVD formats.
Do not spray any liquid or caustic chemicals directly on
the screen. Use a clean and dry microfiber lens cleaning GPS Navigation Antenna (Export Vehicles Only)
The antenna for the navigation GPS system is mounted in
cloth in order to clean the touch screen.
various locations (depending on the vehicle model)
If necessary, use a lint-free cloth dampened with a
within the dashboard. Do not place items on the dashcleaning solution such as isopropyl alcohol or an isoproboard around the GPS antenna location. Objects placed
pyl alcohol and water solution ratio of 50:50. Be sure to
within the line of sight of the antenna will decrease
follow solvent manufacturer’s precautions and
performance. Do not place items directly on or above the
directions.
antenna.
CD/DVD Drive
GPS Navigation/Satellite Radio Antenna (Combo
Do not insert any damaged, warped, scratched or dirty
Antenna)
CDs or DVDs into the CD/DVD player.
The antenna for the GPS navigation, the satellite radio
Discs that have been modified with an adhesive label and SIRIUS Backseat TV™ is mounted on the roof of
should not be used in the CD/DVD player.
most vehicles. Do not place items on the roof around the
roof top antenna location. Objects placed within the line
Do not insert more than one CD/DVD at a time into the
of sight of the antenna will cause decreased performance.
drive slot.
6
MEDIA CENTER 730N (RHR)
Larger luggage items should be placed as far from the of these devices may cause electromagnetic interference
antenna as possible. Do not place items directly on or with the GPS. If a degradation in the navigation system is
observed, turn the devices off, or keep them as far away
above the antenna.
from the GPS antenna as possible.
Other Electronic Devices
You may bring other electronic devices into your vehicle
(e.g., PDA, iPod, laptop computer, CB Radios, etc.). Some
MEDIA CENTER 730N (RHR)
GENERAL HANDLING
User Interface Elements
7
Soft-Keys
Soft-keys are accessible on the touch screen.
Hard-Keys
Hard-keys are on the left and right side of the radio
faceplate.
(1) OPEN/CLOSE
To open or close the display, press the OPEN CLOSE
hard-key (1).
After opening the display, it takes a few seconds to eject
a CD/DVD, if one was in the slot.
When inserting a disc, make sure the label is facing up.
The display will close automatically after inserting the
Power to operate the navigation radio is supplied disc.
through the ignition switch, which must be in the ON,
NOTE:
ACC or in ACC Delay mode in order to operate the
• It may take several seconds to recognize the type of
navigation radio.
inserted disc (CD, DVD, MP3, etc.).
8
MEDIA CENTER 730N (RHR)
• If a CD or DVD will not eject from the player when the (3) RADIO/MEDIA
OPEN/CLOSE hard-key is pressed, the user can per- Press the RADIO/MEDIA hard-key (3) to toggle between
RADIO and MEDIA mode.
form the following eject override procedure:
1. Press the OPEN/CLOSE hard-key to open the display (4) ON/OFF VOLUME
It is possible to set the unit in standby mode during
door.
driving by pressing the ON/OFF VOLUME rotary knob
2. If the display door will not open when the hard-key is
(4).
pressed, manually open the display door by gently
NOTE: If the ignition is switched OFF with the radio in
pulling out on the bottom of the display door.
standby mode, the radio memorizes the standby state
3. While the display door is open, simultaneously press
when the ignition is switched ON again. Press the (4)
and hold the SEEK UP, SEEK DOWN and NAV hardON/OFF VOLUME rotary knob to switch the radio ON.
keys.
The navigation software is always working when the
ignition is switched ON, even if the radio is in standby
4. The CD or DVD will eject from the player.
mode. It is possible to eject the CD and to display the
(2) SEEK UP/SEEK DOWN
time if the unit is switched off.
Press the SEEK up and the SEEK down hard-key (2) to
seek through radio stations in AM, FM, or SAT bands.
Seek through tracks in CD or iPod威 modes or through
songs in the HDD playlist.
MEDIA CENTER 730N (RHR)
(5) Voice Command
Press the Voice Command
hard-key (5)
and wait for the confirmation beep before you
say a voice command.
9
(7) MENU
Press the MENU hard-key (7) to access the system
settings menu.
NOTE: Press the MENU hard-key in an active mode in
order to change mode specific settings.
NOTE: Some vehicles may be equipped with a Voice
(8) NAV
Command button on the steering wheel.
Press the NAV hard-key (8) either to switch to the
(6) Uconnect™ Phone
navigation mode or to toggle between the navigation
Press the Uconnect™ Phone
hard-key (6)
menu and the map viewer menu.
to either activate the Uconnect™ Phone system
(9) USB Connector
or to cancel an active phone call.
Connect a supported device into the USB connector (9) in
order to copy files to the internal hard disk drive.
NOTE:
• If you are in one of the navigation menus (NAV Menu,
NOTE: See USB connector section for information on
MAP display, etc.), you need to press the Uconnect™
supported devices.
Phone hard-key twice to end an active call.
• Some vehicles may be equipped with a Uconnect™
Phone button on the steering wheel.
10
MEDIA CENTER 730N (RHR)
(10) Auxiliary Jack
Connect an external audio device into the AUX Input (10)
(e.g., MP3 player, video-game), to play the device audio
through the car audio system.
Electronic Vehicle Information Center (EVIC)
Some vehicles feature an Electronic Vehicle Information
Center (EVIC) with driver-interactive display. The EVIC
is normally located in the instrument cluster or overhead.
It can display radio station frequencies, CD disc number,
satellite radio channel, and navigation system
information.
1. The VOLUME rocker switch, located on the right,
controls the volume of the sound system. Pressing the top
of the rocker switch will increase the volume and pressing the bottom of the rocker switch will decrease the
volume.
2. The MODE ADVANCED button, located in the center
of the right rocker switch, changes the mode of the
navigation radio between the various modes available
(FM, AM, CD, DVD, SAT, TV, NAV etc.).
3. The FUNCTION SELECT button, located in the center
of the left rocker switch, advances the navigation radio to
the next preset, changes the current disc when in disc
Steering Wheel Mounted Controls (If Equipped)
The remote sound system controls are located on the rear mode, etc. The function is different depending upon
surface of the steering wheel. Please refer to the vehicle which mode is in use.
specific Owner’s Manual on the DVD for detailed infor4. The SCROLL rocker switch, located on the left,
mation.
changes selections such as radio station, CD track, and
The following describes general steering wheel function- satellite radio channel, depending upon the current
ality:
mode.
MEDIA CENTER 730N (RHR)
11
The following describes the operation of the SCROLL SIRIUS Backseat TV™ Operation
If equipped with a SIRIUS Backseat TV™, this control
switch in each mode:
will function the same way as in SIRIUS Satellite Radio
AM/FM/SAT Operation
mode.
Pressing the top of the rocker switch will seek up for the
next available station and pressing the bottom of the Audio Settings
rocker switch will seek down for the next available
Volume
station.
Use the ON/OFF VOLUME rotary knob (4) to adjust the
HDD/Disc/iPod威 Operation
volume of the currently playing audio source. While you
Pressing the top of the rocker switch will go to the next adjust the volume, the name of the audio source and a
track on the disc, and pressing the bottom of the rocker volume indicator are displayed in the lower left corner of
switch will go to the beginning of the current track, or to the display.
the beginning of the previous track, if it is within one
Audio Control Menu
second of the start of the current track.
Press the MENU hard-key (7) on the right side of the
Video Entertainment System™ Operation
radio. Then press the Audio Control soft-key to get to the
If equipped with a remote video player, this control will audio control menu.
function the same way as in disc mode.
12
MEDIA CENTER 730N (RHR)
Use either the arrow soft-keys or the cross-hair on the Press the Equalizer soft-key and use either the arrow
screen to change Balance and Fade. The CENTER soft- soft-keys or the sliders on the screen to adjust BASS,
key resets the settings.
MID, and/or TREBLE.
MEDIA CENTER 730N (RHR)
GETTING STARTED
13
Disclaimer for Navigation Radio
NOTE: The ignition switch must be in the ON or ACC
position to operate the navigation radio.
If the unit is off, switch it on using the ON/OFF Volume
rotary knob.
Soft-keys
The BACK soft-key always takes you to the
previous screen.
The EXIT soft-key always takes you to
the main menu.
Before using the navigation radio read and accept the
disclaimer. The disclaimer will be activated after the
ignition is turned on.
14
MEDIA CENTER 730N (RHR)
Change the Language
The navigation radio will conform to the vehicle language set in the Electronic Vehicle Information Center
(EVIC), if equipped.
If you change the language in the navigation radio, the
system will change the language for all display information.
To change the language with the navigation radio:
1. Press the MENU hard-key on the right side of the
radio.
2. Press the System Setup soft-key to get to the System 3. Press the Language soft-key and select a language.
Setup menu.
Set the Time
1. Press the Time Display soft-key in the lower left corner
of the screen.
MEDIA CENTER 730N (RHR)
15
It is possible to set the time manually (ahead or behind
actual GPS time), by pressing the USER CLOCK soft-key.
Store Radio Presets
1. Press the Radio Media hard-key until AM FM SAT is
displayed in the upper left corner of the screen.
The time is automatically set by the GPS system for the
time zone selected.
2. Press the Set Time Zone soft-key to change to the
desired time zone.
3. Press the Daylight Savings soft-key to switch Daylight
Savings on or off.
16
MEDIA CENTER 730N (RHR)
2. Select the radio band by touching either the AM, FM
or SAT soft-key.
3. Either press the SEEK up/down hard-keys, or touch
the SCAN soft-key, DIRECT TUNE soft-key, or the left
and right arrows to change the currently playing station.
4. Touch and hold one of the station preset soft-keys for
two seconds and you will see the highlighted soft-key
change from green to beige. You will also see the radio
station stored in the highlighted soft-key, and you will
hear a confirmation beep when the station is saved.
NOTE: If the preset list is not displayed press the
PRESETS soft-key, located in the bottom line of the
screen, repeatedly until the preset list is displayed..
You can use the PRESETS soft-key to toggle between:
To turn the preset list off.
To turn the preset artist list on.
To turn the preset song title list on.
To turn the preset station list on.
MEDIA CENTER 730N (RHR)
You can use the PAGE Up and Down soft-keys to scroll
through the list of presets.
You can use the FULLSCREEN soft-key to
toggle between fullscreen and splitscreen
mode. Long preset names are displayed in
fullscreen mode.
Connect Bluetooth姞 Devices
NOTE: Visit www.chrysler.com, www.jeep.com, www.dodge.com or www.ramtrucks.com for a list of compatible phones/devices.
1. Press the MENU hard-key on the right side of the This menu lists all paired Bluetooth威 devices.
radio.
4. Press the PAIR soft-key to start a new pairing.
2. Then touch the System Setup soft-key to get to the
System Setup menu.
3. Touch the Device Pairing soft-key to access the
Bluetooth威 Devices menu.
17
18
MEDIA CENTER 730N (RHR)
5. Enter any 4 Digit Security PIN and touch the PAIR 7. You will then be asked to set a priority for the paired
soft-key again.
phone. If there is more than one paired phone available,
the navigation radio will try to connect to the phone with
6. The pairing procedure starts. Refer to the user’s
the highest priority setting.
manual of your Bluetooth威 phone to complete the procedure.
MEDIA CENTER 730N (RHR)
NOTE: If the phone book download feature is supported by your cell phone, only the first 1000 contacts
will be automatically copied to the radio. Contacts will be
downloaded from your SIM card first and then copied
from your phones default phone book.
Set Default Country and/or State
1. Press the NAV hard-key on the right side of the radio.
2. Press the MENU hard-key.
3. Touch the NAV Settings soft-key.
19
20
MEDIA CENTER 730N (RHR)
Enter Home Address
1. Press the NAV hard-key on the right side of the radio.
If the radio does not display the NAV - Main Menu, press
the NAV hard-key again, or touch the MAIN MENU
soft-key on the display.
4. Touch either the Set Default Country to select your
default country or touch the Set Default State soft-key to
select your default state.
2. Touch the Guide Me Home soft-key to enter your
home address.
MEDIA CENTER 730N (RHR)
If no home address has been set, touch YES to access the
Enter Home Address menu.
3. Touch Street Address to enter your address.
21
4. Touch the soft-key with your state’s name and enter
your street name into the speller.
22
MEDIA CENTER 730N (RHR)
6. Enter the house number into the next screen. If more
than one city has this address, you will then need to
select your city from a list.
Once the address is entered completely, the system shows
a map of your home address area.
NOTE: Read more about destination input and the
predictive speller in the Navigation section of this
manual.
5. Once the street name has been input, touch continue to
confirm.
7. Touch the SAVE soft-key to confirm the address.
MEDIA CENTER 730N (RHR)
After you have entered your home address, the system
will start a route guidance to your home every time you
press the Guide Me Home soft-key.
Change Home Address
This procedure will allow you to change your Home
Address if one has already been entered.
1. Press the MENU hard-key.
2. Touch the My Files soft-key.
23
24
MEDIA CENTER 730N (RHR)
3. Touch the My Address Book soft-key.
4. Touch the Home soft-key.
5. Touch the Edit Contact soft-key.
6. Touch the Change Address soft-key.
MEDIA CENTER 730N (RHR)
25
• There may be instances when entering a city first prior
to the address will locate the correct address more
accurately.
7. Touch the soft-key with your state’s name and enter
your street name into the speller.
NOTE:
• If the State or Country needs to be changed, touch the
appropriate soft-key to edit the setting.
8. Once the street name has been input, touch continue to
confirm.
26
MEDIA CENTER 730N (RHR)
9. Enter the house number into the next screen. If more After you have changed your home address, the system
than one city has this address, you will then need to will start a route guidance to your home every time you
select your city from a list.
press the Guide Me Home soft-key.
Once the address is entered completely, the system shows Voice Command Tutorial
When you press the Voice Command hard-key, you will
a map of your home address area.
hear a beep. The beep is your signal to give a command.
Say TUTORIAL to listen to a Voice Command tutorial.
Press any hard-key or touch the display to cancel the
tutorial.
Uconnect™ Phone Tutorial
When you press the Uconnect™ Phone hard-key, you
will hear a beep. The beep is your signal to give a
command. Say TUTORIAL to listen to a Uconnect™
Phone system tutorial.
10. Touch the SAVE soft-key to confirm the address.
Press any hard-key or touch the display to cancel the
tutorial.
MEDIA CENTER 730N (RHR)
Uconnect™ Multimedia (RADIO)
Radio Mode
Overview
The RHR navigation radio (NTG4 Refresh) is equipped
with four different tuners:
• FM 87.7 MHz - 107.9 MHz (RBDS capable)
• AM 530 kHz - 1710 kHz
• SAT SIRIUS Satellite Radio (over 130 channels)
• TV SIRIUS Backseat TV™ (If Equipped)
Toggle between the radio and the media menus by
pressing the RADIO/MEDIA hard-key. The different
tuner modes can be selected via the tabs in the radio
screen.
27
Satellite Radio Mode
In order to receive satellite radio, the vehicle needs to be
outside with a clear view to the sky. If the screen shows
Acquiring Signal, you might have to change the vehicle
position in order to receive a signal. In most cases, the
satellite radio does not receive a signal in underground
parking garages or tunnels.
28
MEDIA CENTER 730N (RHR)
Change a Channel or Frequency
Replay Mode
Press the SEEK up or the SEEK down hard-key to play Select the REPLAY soft-key for a replay of the currently
the next available station or channel.
playing satellite radio station.
Select DIRECT TUNE to enter a frequency or a channel
number, and confirm your selection by pressing the GO
soft-key.
Touch the left arrow soft-key to step down
manually through the frequency or channel
roster.
Touch the right arrow soft-key to step up
manually through the frequency or channel
roster.
Select the SCAN soft-key for a five second preview of Use the left and right arrow soft-keys to move the red
each listenable station in the frequency band. Touch the replay slider. Depending on broadcast format, it is posSCAN soft-key again to stop the scan function and to sible to replay up to one hour.
select a radio station.
MEDIA CENTER 730N (RHR)
29
It is also possible to use the PAUSE/PLAY soft-key to
pause the playback for up to an hour.
Select the LIVE soft-key to receive the currently playing
satellite radio station.
SIRIUS Satellite Radio Channel List
Touch the SEARCH/BROWSE soft-key.
Select the View All Channels soft-key in the SAT Browse
screen.
30
MEDIA CENTER 730N (RHR)
To sort the list by artist.
To sort the list by song.
To sort the list by SIRIUS channel
name.
Touch the soft-key with the desired channel name to
select the channel.
You may use the LIST soft-key to toggle between:
MEDIA CENTER 730N (RHR)
31
Station Presets
There are 12 station presets available for storing the radio
stations in each tuner range.
In order to store the desired station, touch and hold one
of the station preset soft-keys for two seconds and you
will see the highlighted soft-key change from green to
beige. You will also see the radio station stored in the
highlighted soft-key, and you will hear a confirmation
beep when the station is saved.
SIRIUS Satellite Radio Favorites (SAT Favorites)
You can save 50 favorite songs and 50 favorite artists.
Touch the add favorite soft-key to add either
the song or the artist of the currently playing
program to the SAT Favorites list.
NOTE: Not all songs broadcasted will allow you to save
it as a favorite. The favorite soft-key will not be displayed
during those conditions.
32
MEDIA CENTER 730N (RHR)
The favorite star indicates that a favorite song Display SAT Favorites List
Touch the SEARCH/BROWSE soft-key and
or artist is currently playing on one of the
select Favorites from the SAT Browse screen.
SIRIUS satellite radio channels.
Example: If an Artist Alert is active, the radio displays a
popup message, to inform you that your favorite artist is In this example the favorite song “Suddenly” is playing
on channel 3, and the favorite artist “Elvis Presley” is
playing on one of the channels.
playing on channel 13.
MEDIA CENTER 730N (RHR)
33
Touch the desired favorites soft-key to switch the SAT
tuner to the corresponding channel.
Touch the SETUP soft-key to manage the SAT Favorites
settings.
You may use the LIST soft-key to toggle between:
Manage SAT Favorites
Touch the SEARCH/BROWSE soft-key, select
Favorites from the SAT Browse screen.
To show a list of currently playing
favorite artists.
To show a list of currently playing
favorite songs.
To show a list of currently playing
favorites as they were initially saved.
34
MEDIA CENTER 730N (RHR)
The checkmarks in the Song Alerts and Game Alerts Select the SONGS soft-key to display the favorite songs,
soft-key indicate active alerts. Touch the corresponding and select the ARTISTS soft-key to show the favorite
Alert soft-key to disable either all Song Alerts or all Game artists.
Alerts.
The checkmark in the soft-key marks enabled favorites.
Touch the Favorite Songs & Artists soft-key to manage Touch the desired soft-key to de-activate the favorite, or
individual songs and artists.
touch a corresponding DELETE soft-key to delete the
favorite from the list.
RBDS (Radio Broadcast Data System)
This radio navigation system is capable of receiving
RBDS signals in the FM band. RBDS is a technology used
for transmitting textual information about the music
type, song and artist for FM band music. This information is shown on the display.
NOTE: Not all radio stations support RBDS.
The RBDS information is displayed below the frequency
reading of the currently playing radio station.
MEDIA CENTER 730N (RHR)
35
Personality, Public, Religious Music, Religious Talk,
Radio Text Information
Select the INFO soft-key to display additional Rhythm and Blues, Rock, Soft, Soft Rhythm and Blues,
radio text information in the right half of the Soft Rock, Sports, Talk, Top 40, Weather
screen.
SIRIUS Satellite Radio Program Type (SAT Music
Select the CLOSE INFO soft-key to hide addi- Type)
Pop, Rock, Electronic/Dance, Hip-Hop, Rhythm and
tional radio text information.
Blues, Country, Christian, Jazz and Blues, Standards,
Classical, Latin, International, Talk, Political Talk, ComMUSIC TYPE (Program Type Filter)
edy, Entertainment, Howard Stern, Martha Stewart, FamProgram Type (PTY) is only available in FM and SAT ily & Kids, Sports Talk & News, College, NFL, NBA,
mode. Radio stations are grouped according to their NHL, More Sports, Soccer, NASCAR, Financial News, US
program (e.g., Soft Rock, Rhythm & Blues, etc.).
News, International News, Public Radio, Weather, ReliSelect MUSIC TYPE to enable and/or disable desired gion.
program types. The SEEK and SCAN function will then You can find the latest SIRIUS channel line up at
only display stations with matching program types.
http://www.sirius.com.
RBDS (FM) Program Types
Adult Hits, Classic Rock, Classical, College, Country,
Information, Jazz, Language, News, Nostalgia, Oldies,
36
MEDIA CENTER 730N (RHR)
Scan by Genre
Touch the SEARCH/BROWSE soft-key, select
View Genres from the SAT Browse screen.
The radio displays all available station in this category.
Touch a soft-key with the corresponding artist, or song to
switch to play the desired channel.
Example: Select the Rock category by touching the Rock
soft-key.
MEDIA CENTER 730N (RHR)
37
Scan by Music Type
Game Zone
Touch the SEARCH/BROWSE soft-key, select
Touch the SEARCH/BROWSE soft-key, select
Type Scan from the SAT Browse screen.
Game Zone from the SAT Browse screen.
38
MEDIA CENTER 730N (RHR)
SIRIUS Satellite Travel Link
Press the MENU hard-key and then the Travel Link
soft-key.
NOTE: Travel Link not available for Canadian market.
Select Movie Listings to check local movie theaters and
listings.
Select Sports to check in-game and final scores as well as
upcoming schedules.
Select Favorites to display your favorite selections.
Select Ski Info to view ski and snowboarding conditions
at local ski resorts.
Select Weather Map to view a detailed weather map.
Save a Favorite
You may save 1 weather station, 1 ski resort, 1 gas station,
1 movie theater, and 8 sport teams.
On the Travel Link screen select Favorites to display the
list of your SIRIUS Favorites.
Select Forecast to display current and forecasted weather.
Select Fuel Prices to check local gas and diesel prices.
MEDIA CENTER 730N (RHR)
For example: Touch the No Favorite Gas Station Location
soft-key to display a list of gas stations.
You may use the LIST soft-key to toggle between:
To sort the list by price.
39
40
MEDIA CENTER 730N (RHR)
To sort the list by distance to the
current vehicle location.
To sort the list by alphabet.
Touch the FUEL soft-key to select the desired fuel grade
used in the list view.
Touch the soft-key with the desired gas station to display
details for the selected gas station.
Touch the favorite gas station soft-key to save
this gas station as favorite.
Once a gas station is selected as favorite, the
soft-key changes.
MEDIA CENTER 730N (RHR)
41
You may now touch the ROUTE soft-key to enter the Changing a SIRIUS Travel Link Favorite
address as a destination.
For example: Touch the Forecast soft-key in the Travel
Once a favorite was selected, the name and the selected Link screen.
fuel price is displayed in the SIRIUS Favorites screen.
42
MEDIA CENTER 730N (RHR)
Deleting a SIRIUS Travel Link Favorite Sports
Team
Touch the favorite weather station soft-key to make the
current weather station a favorite. The new favorite
weather station replaced the old favorite weather station. For example: Touch the Charlotte Bobcats soft-key in the
Favorites screen.
MEDIA CENTER 730N (RHR)
43
Weather Map
Touch the FAV soft-key to remove the
team from the Favorites list.
Touch the Weather Map soft-key in the SIRIUS Travel
Link screen.
44
MEDIA CENTER 730N (RHR)
Touch the 150 mi, 50 mi, or 15 mi soft-key to
zoom into the desired area of the map. A lighter
soft-key color indicates a selected zoom level.
The initial map is centered at the vehicle location.
Touch the center soft-key to re-center the map
at the vehicle location.
Touch the weather info soft-key to display
issued weather warnings and details.
Touch the color legend soft-key to toggle the
color transparency.
Touch the U.S. soft-key to zoom into the entire
U.S.
MEDIA CENTER 730N (RHR)
Touch the soft-key with the storm name to access more
detailed information.
45
Touch the MAP soft-key to see a graphical depiction of
the warning area.
46
MEDIA CENTER 730N (RHR)
Touch the DETAILS soft-key to receive detailed text
message for the selected weather warning.
Touch the NEXT and PREV soft-key to page through the
entire message.
Touch the weather updates button to check for
the time of the last weather data update.
MEDIA CENTER 730N (RHR)
47
Touch the dim soft-key to dim or highlight the
radar map color chart.
Select the storm soft-key to display
rotating storm systems, such as hurricanes, tornados, etc.
Select the radar map to depict the
rain/snow accumulation map.
48
MEDIA CENTER 730N (RHR)
Select the isobar map to depict areas of
high and low pressure.
Touch the map buttons soft-key to toggle the
map buttons on or off.
Radio Settings
AM / FM MENU
There are no specific settings for this mode.
SAT MENU
While in SAT mode press the MENU hard-key to display
the SAT Menu.
Favorites
Select Favorites to manage the SAT Favorites. (see Satellite Radio Mode for more information).
NOTE: Soft-keys may be disabled upon availability of
weather data.
Travel Link
Select Travel Link to access Sirius Travel Link services.
(see Sirius Travel Link for more information).
MEDIA CENTER 730N (RHR)
49
Parental Lockout
Select Parental Lockout to enable and/or disable desired
channels. The SEEK and SCAN function will then only
display channels without parental lockout.
Re-Subscribe to SIRIUS Satellite Radio
New vehicle purchasers or lessees will receive a free
limited time subscription to SIRIUS Satellite Radio and
Realtime Traffic Service with your navigation radio.
Following expiration of the free services, it will be
necessary to access the information on the Subscription
Information screen in order to re-subscribe.
Touch the Subscription soft-key to access the Subscrip- Write down the SIRIUS ID numbers for your receiver. To
reactivate your service either call the number listed on
tion Information screen.
the screen or visit the provider online.
SAT Video Menu (if equipped)
While in TV mode press the MENU hard-key to display
the SAT-Video Menu.
50
MEDIA CENTER 730N (RHR)
Touch the Subscription soft-key to access the Subscription Information screen.
Re-Subscribe to SIRIUS Backseat TV™
New vehicle purchasers or lessees will receive a free
limited time subscription to SIRIUS Backseat TV™ with Write down the SIRIUS ID numbers for your receiver. To
your radio. Following expiration of the free services, it reactivate your service either call the number listed on
will be necessary to access the information on the Sub- the screen or visit the provider online.
scription Information screen in order to re-subscribe.
NOTE: SIRIUS Backseat TV™ is not available in
Canada, Hawaii or Alaska.
MEDIA CENTER 730N (RHR)
51
Select the Nighttime Colors soft-key to switch to manual
Display Settings
Press the MENU hard-key and touch the Display Settings nighttime mode and to adjust the brightness of the
soft-key to access the Display Settings menu.
display using nighttime colors.
Select the Auto Color Mode soft-key to switch to automatic daytime/nighttime mode and to control the brightness of the display using the dimmer switch of the
vehicle.
Touch the EXIT soft-key to save your settings and to
return to the AM/FM/SAT Menu.
Screen-saver
To activate the screen-saver press the MENU hard-key
and touch the Screen Saver soft-key.
Once the screen saver is active, press any hard-key or
Select the Daytime Colors soft-key to switch to manual touch the display to deactivate it.
daytime mode and to adjust the brightness of the display
using daytime colors.
52
MEDIA CENTER 730N (RHR)
View Settings
Press the MENU hard-key to display a radio menu.
Touch the Picture View soft-key to enable the picture
view mode, where a picture can be displayed on the right
half of the radio screen. Refer to the Hard Disk Drive
section of this manual for a detailed example.
Touch the Map View soft-key to enable the map view
mode.
In Map View mode the navigation map or turn-by-turn
navigation can be displayed on the right half of the radio
screen (see Navigation View Settings for more
information).
Touch the Default View soft-key to enable the default
view mode, where the vehicle brand logo is displayed in
the right half of the screen.
MEDIA CENTER 730N (RHR)
ParkView™ Rear Backup Camera (if equipped)
53
When equipped with ParkView™, the radio display
shows the rear view camera picture as soon as the shifter
is in the REVERSE position for vehicles with automatic
transmission. In vehicles with manual transmission the
REVERSE gear must be engaged.
Touch the Camera Setup button in the System Setup
menu to disable or enable ParkView™.
54
MEDIA CENTER 730N (RHR)
Uconnect™ Multimedia (MEDIA)
Disc Mode
Overview
The navigation radio is equipped with a CD/DVD
player.
Toggle between the media and the radio menus by
pressing the RADIO/MEDIA hard-key. The different
media modes can be selected via the tabs in the radio
screen.
Disc Requirements
CAUTION!
This disc player will accept a 4 3/4 in (12 cm) disc
only. The use of other sized discs may damage the
disc player mechanism.
The radio is capable of playing compact discs (CD),
recordable compact discs (CD+R and CD-R), rewritable
compact discs (CD+RW and CD-RW), recordable DVD-R,
DVD+R, DVD-RW, and DVD+RW compact discs.
MEDIA CENTER 730N (RHR)
Your radio will play the following formats:
MP3, WMA, CD Audio, DVD Audio, and DVD Video,
DVD-ROM, DVD Plus, DualDisc, SA-CD (CD Layer).
Do not insert anything other than the supported CD/
DVD formats.
SACD (SACD layer) VCD, SVCD, VCD format on DVD
and MPEG-4 are not supported.
55
appropriate mode after the disc is recognized, and starts
playing the first track. The display shows “Reading...”
during this process.
NOTE: A faulty CD is NOT automatically ejected. Use
only standard size discs. Discs that have been modified
with an adhesive label should not be used in the CD/
DVD player.
High definition content and media (e.g., HD-DVD, BluA complete list of supported CD/DVD formats is avail- Ray) is not supported.
able at www.chrysler.com, www.jeep.com, www.dodgeIf the user does not remove an ejected CD within
.com or www.ramtrucks.com.
approximately 10 seconds, the CD will reload.
Inserting a Disc
NOTE:
1. Press the OPEN/CLOSE hard-key once.
• On MP3 and WMA CDs with a large number of songs,
it may take several seconds to read, play, and display
2. With the printed side upwards, insert the disc into the
information for all songs on the disc.
disc slot of the radio. The radio pulls the disc in automatically and closes the flip screen. The radio selects the
56
MEDIA CENTER 730N (RHR)
• Recording your own CD on a home computer at a Selecting Disc Mode
lower write speed will result in a more consistent Toggle between the media and the radio menus by
pressing the RADIO/MEDIA hard-key. The disc mode
quality.
can be selected by touching the Disc tab soft-key.
• Subfolders recorded on your own CD on a home
computer will also be recognized.
NOTE: When a disc is inserted, the appropriate mode is
automatically selected once the disc is recognized.
Removing a Disc
Scan Search
1. Press the OPEN/CLOSE hard-key.
Touch the SCAN soft-key.
2. The disc is ejected and can be removed.
NOTE: If the disc is not removed within approximately
10 seconds, the unit pulls it back into the slot (park
position). The disc may be ejected when the ignition is
OFF.
3. Press the OPEN/CLOSE hard-key to close the display.
The display will close automatically within 30 seconds
after the disc is removed.
The individual tracks of the disc will be played in
succession for ten seconds each.
Select the STOP SCAN soft-key to stop the scan function.
MEDIA CENTER 730N (RHR)
57
Next Track
Rewind Track
Press the SEEK up hard-key. The next track on the disc is
Touch and hold the Fast Reverse soft-key. The audio
played. Once the last track has been reached in the
will be heard at a reduced level while going
forward direction, the unit will loop back to the first through the track in this mode. Stop the fast reverse by
track.
releasing the Fast Reverse soft-key.
Previous Track
Pressing the SEEK down hard-key plays the previous
track. If the first track has been reached in the backward
direction, the unit will switch from the first track to the
last track. If a track has been playing for more than one
second when the SEEK down hard-key is pressed, the
unit will skip back to the beginning of the current track.
Fast Forward Track
Touch and hold the Fast Forward soft-key. The
audio will be heard at a reduced level while going
through the track in this mode. Stop the fast-forward by
releasing the Fast Forward soft-key.
Displaying the Elapsed Title Time
The elapsed title time of the current playing track is
displayed in the left center of the screen.
Select Title from List
Select TRACKS to display a list of the
titles of the currently playing disc.
Select the desired track you wish to
play.
Select TRACKS to hide the list.
58
MEDIA CENTER 730N (RHR)
Disc Info
Select INFO to display title and album artwork
in the right half of the screen.
Gracenote威 Music Recognition Technology
Select INFO again to display title, artist, album
and genre information in the right half of the
screen.
Select INFO again to hide the information.
This navigation radio is equipped with the Gracenote威
Music Recognition Service, with an embedded database
to look up album, song title, genre and artist information.
Data will be found for most Audio CDs (CDA discs).
Data will not be found for DVDs or data discs (those with
MP3 or WMA files).
MEDIA CENTER 730N (RHR)
59
Music recognition technology and related data are provided by Gracenote威. Gracenote威 is the industry standard in music recognition technology and related content
delivery. For more information visit www.gracenote.com.
NOTE: Visit www.chrysler.com, www.jeep.com, www.dodge.com or www.ramtrucks.com for update
information.
Copying Complete Disc to Hard-Drive
Read about copying selective songs in the Hard Disk
Drive section of this manual.
Insert an Audio-CD or a disc with MP3 or WMA files.
Touch the COPY soft-key to start the copy
process.
60
MEDIA CENTER 730N (RHR)
Disc Menu
While in disc mode with audio disc inserted, press the
MENU hard-key to access the Disc Menu.
Select Random to play the titles on the disc in random
order. Select Random again to turn Random off.
Select Rpt. TRK to repeat the currently playing title.
Touch the Rpt. TRK soft-key again to stop the repeat
mode.
Select Repeat Folder to repeat all songs in the currently
playing folder (MP3/WMA disc only). Touch the Repeat
Folder soft-key again to stop the repeat mode.
The copy progress is shown in the display. It is possible
to listen to radio modes during this process. Copying Playing a MP3/WMA Disc
time is greater than 5x the normal playback rate.
1. Press the OPEN/CLOSE hard-key once.
Touch the STOP COPY soft-key to stop the
2. With the printed side upwards, insert the disc into the
copy process at any time.
disc slot of the radio. The radio pulls the disc in automatically and closes the flip screen. The radio selects the
MEDIA CENTER 730N (RHR)
appropriate mode after the disc is recognized, and starts
playing the first track. The display shows “Reading...”
during this process.
A MP3/WMA disc may contain audio files in a folder
structure. The folder, if any, is shown in the list view.
Touch the TRACKS soft-key if the list is not displayed.
61
3. Touch the soft-key with a folder symbol to open a
folder.
Touch the UP soft-key to go up one folder.
62
MEDIA CENTER 730N (RHR)
Playing a Video DVD
NOTE: Viewing a DVD video on the radio screen is not
available in all states/provinces, and the vehicle must be
stopped, and the shifter must be in the PARK position for
vehicles with automatic transmission. In vehicles with
manual transmission the parking brake must be engaged
also.
Insert a video DVD first.
The playback starts automatically after the DVD video is
recognized by the disc drive.
Touch the CHAPTERS soft-key to display a list of available chapters or tracks. Touch a chapter or track soft-key
in the list to start playback from the selected section.
MEDIA CENTER 730N (RHR)
63
Touch the VIDEO soft-key to view the video on the Touch the cursor arrow soft-keys to select the title you
want to view, then touch the ENTER soft-key to start
screen.
playback.
DVD Menu Controls
If you insert a DVD video disc that contains a top menu,
Touch the MOVE CONTROLS soft-key to move the
a menu may appear.
controls to the right part of the screen.
Touch the CLOSE CONTROLS soft-key to close the
DVD Menu Controls.
64
MEDIA CENTER 730N (RHR)
DVD Playback Controls
In video playback mode, touch anywhere on the screen to
show the DVD playback controls.
Touch the REVERSE soft-key during playback to
fast reverse playback.
Touch the FORWARD soft-key during playback to
fast forward playback.
Touch the NEXT soft-key to locate succeeding chapters or
tracks.
Touch the PREV soft-key to start playback from the
beginning of the current chapter or track. When you
press twice in quick succession, playback starts from the
beginning of the preceding chapter or track.
Touch the MOVE CONTROLS soft-key to move the
controls to the right part of the screen.
Touch the PAUSE soft-key to pause playback.
Touch the STOP soft-key to stop playback.
Touch the CLOSE CONTROLS soft-key to close the
DVD MENU Controls.
MEDIA CENTER 730N (RHR)
DVD Video Menu
While in disc mode with a DVD inserted, press the
MENU hard-key to access the DVD Video Menu.
65
In the DVD Setup menu you may select Menu Language,
Audio Language, Subtitle, Camera Angle, Aspect Ratio,
and Brightness settings by pressing the corresponding
soft-key. Some of the soft-keys are disabled if the inserted
disc does not support the functionality.
Disc Skipping
Skipping is typically caused by a damaged (scratched)
disc. This will result in a 10 second jump forward until
the damaged area is passed.
Temperature Protection
If the temperature of the disc reader during operation
becomes too high, a popup message will inform the user
of an over temperature situation. The unit switches to
radio mode until the disc reader temperature has
Touch the DVD Setup soft-key to access the DVD Setup dropped to a normal level.
menu.
66
MEDIA CENTER 730N (RHR)
Hard Disk Drive Mode (HDD)
The HDD mode gives you access to the audio files on the
internal hard disk drive. It functions similar to a CD
player, with the exception that the internal HDD can hold
more tracks. It can hold approximately 3,000 four-minute
CD-quality songs.
Before using the HDD mode, you will need to copy tracks
to the internal hard drive.
The files will be stored on the internal hard disk drive
and can be used in the HDD mode.
Copy Audio Disc to Hard-Drive
1. Insert a disc. Press the COPY soft-key or follow the
following steps.
2. While in the DISC mode, press the MENU hard-key to
access the Settings Menu.
3. Touch the My Files soft-key.
MEDIA CENTER 730N (RHR)
4. Select My Music.
5. Touch the Add Music Files to HDD soft-key.
67
6. Touch the From DISC soft-key in the next screen to
copy music tracks of the inserted disc to the hard disk
drive.
During the copy process, the disc player cannot play
audio.
68
MEDIA CENTER 730N (RHR)
Copy WMA/MP3 Files to Hard-Drive
You can copy MP3 and WMA formatted compressed
audio files from a disc or via USB (e.g., USB stick).
It is recommended to sort music files into folders.
The copy progress is shown in the display.
It is possible to listen to radio modes during this process.
Copying time is greater than 5x the normal playback rate.
NOTE: When copying CD Audio to HDD, audio files
are converted from CD Audio to WMA. DVD-Audio
cannot be copied to the HDD.
MEDIA CENTER 730N (RHR)
69
Songs located in the root level (top level) of the disc or • Song 3.mp3 (Third song in Playlist 2)
USB device are displayed in a folder named Disc (or the
Selective Song Copying from Disc
physical disc name) for disc media or USB or USB sticks.
You can select specific songs on a WMA/MP3 disc using
Once the songs are copied, the playlist will be named the following procedure:
Disc_Playlist (for Disc) or USB_Playlist (for USB stick).
For the example above the list on the HDD will show the
following:
<Disc Name>
• Song 1.mp3 (First song in Playlist 1)
• Song 2.mp3 (Second song in Playlist 1)
• Song 3.wma (Third song in Playlist 1)
Disc_Playlist
• Song 1.mp3 (First song in Playlist 2)
• Song 2.mp3 (Second song in Playlist 2)
1. While in the DISC mode, press the MENU hard-key to
access the Settings menu.
70
MEDIA CENTER 730N (RHR)
2. Touch the My Files soft-key.
3. Select My Music.
MEDIA CENTER 730N (RHR)
4. Touch the Add Music Files soft-key.
5. Touch the From DISC soft-key in the next screen.
71
6. Select the folders or titles you would like to copy, by
touching the checkbox.
A red check mark indicates the selected songs and/or
folders. Touch the ALL soft-key to select all files and
folders at once.
72
MEDIA CENTER 730N (RHR)
NOTE: You may touch a folder icon, to open the folder
and select specific songs inside the folder.
7. Touch the SAVE soft-key to start the copy process.
The copy process is shown on the display. It is possible to
listen to radio modes during this process.
If you unplug or eject the media before the copying
process is finished, the process will be interrupted. You
may restart the copying process by repeating the steps
above.
Copying from USB
1. Insert a USB device.
Wait until the radio starts playing the music from the
USB device.
2. Touch the COPY FROM USB soft-key.
MEDIA CENTER 730N (RHR)
73
4. Touch the SAVE soft-key to start the copy process.
3. Select the folders or titles you would like to copy.
A red check mark indicates the selected songs and/or The copy process is shown on the display. It is possible to
folders. Touch the ALL soft-key to select all files and listen to radio modes during this process.
folders at once.
NOTE: You may touch a folder icon, to open the folder
and select specific songs inside the folder.
74
MEDIA CENTER 730N (RHR)
Playing Audio Files from an external USB device
You can play songs directly from an external USB device,
by connecting the device to the radio, or to the secondary
USB port (if equipped, typically located in the glove box
or center console). The radio will find the music files and
starts playing automatically.
NOTE: Refer to www.chrysler.com, www.jeep.com,
www.dodge.com or www.ramtrucks.com for device
compatibility list and functionality support.
Playing Audio Files from the Hard Disk Drive
Press the RADIO/MEDIA hard-key and select the HDD
tab. You can play songs directly from the internal hard
disk drive.
Touch the SEARCH/BROWSE soft-key to select an available category.
The navigation radio can sort the files by artist, by album,
by song, by genre, from a folder, or from Favorites.
MEDIA CENTER 730N (RHR)
1. For this example, touch the Albums soft-key.
75
2. Touch a soft-key with the desired playlist name to play
a playlist.
Touch the PLAY ALL PLAYLISTS soft-key to play all
available playlists.
76
MEDIA CENTER 730N (RHR)
Next Track
Rewind Track
Press the SEEK up hard-key. The next track of the current
Touch and hold the Fast Reverse soft-key. The audio
playlist is played. Once the last track has been reached in
will be heard at a reduced level while going
the forward direction, the unit will loop back to the first through the track in this mode. Stop the fast reverse by
track.
releasing the Fast Reverse soft-key.
Previous Track
Press the SEEK down hard-key. The previous track of the
current playlist is played. If the first track has been
reached in the backward direction, the unit will switch
from the first track to the last track. If a track has been
playing for more than 1 second when the SEEK down
hard-key is pressed, the unit will skip back to the
beginning of the current track.
Displaying the Elapsed Title Time
The elapsed title time of the current playing track is
displayed on the left side of the screen.
HDD Menu
While in HDD mode, press the MENU hard-key to access
the HDD Menu.
Shuffle
The shuffle function plays random tracks from the hard
Fast Forward Track
disk drive. Touch the Shuffle soft-key to switch the
Touch and hold the Fast Forward soft-key. The
random play function on or off. A red check mark
audio will be heard at a reduced level while going
indicates the shuffle function is active.
through the track in this mode. Stop the fast forward by
releasing the Fast Forward soft-key.
MEDIA CENTER 730N (RHR)
Repeat Track
The repeat track function repeats the currently played
track. Touch the Rpt. TRK soft-key to switch the repeat
track function on or off.
A red check mark indicates the repeat track function is
active.
Favorite Playlists on the Hard Disk Drive
You may save links to favorite playlists/folders in the
Favorite list.
77
78
MEDIA CENTER 730N (RHR)
1. Touch the Favorites soft-key to display a list of favorite
playlists.
2. Touch one of the ADD FAVORITE soft-keys.
MEDIA CENTER 730N (RHR)
3. You may favor an artist, an album, a genre, or a
playlist (folder). For this example select the Albums
category.
79
4. Select the desired album. You may use the A to Z
soft-key to navigate faster through very long lists.
80
MEDIA CENTER 730N (RHR)
NOTE: The link to the favorite playlist will be removed
after a playlist was removed from the My Playlists menu.
Refer to Editing Playlists on the Hard Disk Drive in this
manual.
You may now edit the list by touching the EDIT soft-key,
or exit the list by touching the EXIT soft-key.
A link to the selected Album is now saved in the Favorite
Playlists list.
You may save up to 12 favorites.
MEDIA CENTER 730N (RHR)
81
Editing Track Info on the Hard Disk Drive
2. The song information is displayed and can be edited.
1. While in the HDD mode, touch the EDIT INFO You may change the artist, the name, the album, the track
order, the genre, and the folder.
soft-key.
82
MEDIA CENTER 730N (RHR)
3. For this example scroll down to the last entry and 4. Touch the NEW soft-key to create a new folder.
touch the CHANGE soft-key for the folder name.
MEDIA CENTER 730N (RHR)
5. Name the folder and touch the SAVE soft-key.
83
6. The song is now assigned to the new folder. Touch the
EXIT soft-key to switch back to the HDD screen.
84
MEDIA CENTER 730N (RHR)
Managing Playlists on the Hard Disk Drive
(Folders)
1. While in the HDD mode, press the MENU hard-key to
access the HDD Menu.
3. Select My Music.
2. Touch the My Files soft-key.
MEDIA CENTER 730N (RHR)
85
2. Touch the System Setup soft-key to access the System
Setup menu.
3. Touch the Manage HDD soft-key to access the Manage
HDD menu.
You may now add music files, delete music files, or
rename folders on the HDD.
Deleting All Playlists from the Hard Disk Drive
1. Press the MENU hard-key on the right side of the
This menu displays the available space on the hard disk
radio.
drive and allows you to delete pictures, music files, and
address book entries.
86
MEDIA CENTER 730N (RHR)
Importing Pictures
It is possible to import display pictures to the internal
hard disk drive. The pictures can be displayed on the
right half of the radio screen.
WARNING!
It is not possible to copy pictures from a USB device
or CD while the vehicle is in motion.
In the default mode, the vehicle brand logo is displayed
in the right half of the screen. Press the Menu hard-key on
the right side of the radio to access one of the Setting
menus.
It is recommended to change the picture dimensions on a
PC or Digital Camera to 240 by 158 pixels before the
import.
MEDIA CENTER 730N (RHR)
87
NOTE: USB devices (e.g., camera memory USB adap- 2. Touch the My Files soft-key to go to the Manage My
tors, etc.) must comply with the MSD (Mass Storage Files screen.
Device) standard. This USB terminal can provide power
to the inserted device. The device’s current limitation
must be less or equal to 1A.
1. Insert either a CD or a USB device containing your
pictures.
3. Touch the My Pictures soft-key to get an overview of
the currently stored images.
88
MEDIA CENTER 730N (RHR)
4. Press one of the ADD soft-key.
5. Select the type of media inserted.
NOTE: Only JPEG format will be recognized.
6. Use the PAGE soft-keys to page through a list of
pictures and press the picture you would like to import.
MEDIA CENTER 730N (RHR)
89
7. Confirm your selection by touching the SAVE soft-key. The imported picture is now available in the Manage My
Pictures screen.
8. In order to display the imported picture in the radio
screen, touch the desired picture soft-key.
90
MEDIA CENTER 730N (RHR)
9. Select this picture by pressing the Picture View soft- 10. Press the MENU hard-key twice and then touch the
key. A check mark indicates the currently used picture. Picture View soft-key to enable the picture view.
Use the PREV or NEXT soft-key to step through the list of
available pictures.
Touch the DELETE soft-key to delete the picture from the
hard disk drive.
MEDIA CENTER 730N (RHR)
The picture is now displayed on the right half of the
screen.
91
92
MEDIA CENTER 730N (RHR)
Uconnect™ Multimedia (REMOTE DEVICES)
AUX Mode (If Equipped)
The AUX mode gives you access to the audio files on an
external digital player device. It functions as a remote
control for the currently connected mobile digital device,
and you can play audio from the device through the
vehicles speaker system. Before using the AUX mode,
you will need to connect your device to the USB connector.
Playing Audio Files from the Mobile Digital Player
Device
You can play songs directly from the device. For this
example we used an iPod威.
NOTE:
• It is recommended that you use the latest available
software for your digital device. See device manufacturer website for updates.
• Visit www.chrysler.com, www.jeep.com, www.dodge.com or www.ramtrucks.com for a list of compatible
Touch the TRACKS soft-key to display a list view.
phones/devices.
Touch the soft-key with the desired list item to select and
play the item.
MEDIA CENTER 730N (RHR)
Touch the HIDE TRACKS soft-key to hide the list.
Touch the SEARCH/BROWSE soft-key to browse by
categories.
NOTE:
• Depending on the amount of songs and on the performance of the digital player device, it may take some
time before the SEARCH/BROWSE soft-key is displayed.
• USB sticks or any other external storage device (hard
drives) do not support the Search/Browse feature.
Touch the Artists soft-key for this example.
Select an iPod威 Category
The iPod威 can sort the files by playlists, by song names,
by artists, by composers, by genres, by albums, by
podcasts or by audio books.
93
94
MEDIA CENTER 730N (RHR)
Touch the PAGE UP or PAGE DOWN soft-key to navigate through the list of artists.
iPod威 or Smart Player Devices
Different generations of players will support different
levels of features (Scan, FF, RW, Play/Pause, etc.). For
devices that do not support these features, the radio will
not display the soft keys.
Please refer to the following websites for a listing of
supported devices and device specific supported features: www.chrysler.com, www.jeep.com, www.dodge.com or www.ramtrucks.com.
Touch a soft-key with the desired artist’s name to play
songs from this artist.
Touch the ALL soft-key to play songs from all available
artists.
MEDIA CENTER 730N (RHR)
95
List Jump
If you encounter a very long list, it may be helpful to
touch the A to Z soft-key to go to the List Jump menu.
Touch a soft-key with the desired artist’s name to play
songs from this artist.
For this example we entered the first letter of the desired
artist.
Touch the GO soft-key to jump to the desired artist.
96
MEDIA CENTER 730N (RHR)
Previous Track
Press the SEEK down hard-key. The previous track of the
current folder is played. If the first track has been reached
in the backward direction, the unit will switch from the
first track to the last track. If a track has been playing for
more than 10 seconds when the SEEK down hard-key is
pressed, the unit will skip back to the beginning of the
current track.
Fast Forward Track
Touch the Fast Forward soft-key. The audio will be
heard at a reduced level while going through the
track in this mode. Stop the fast forward by releasing the
Fast Forward soft-key.
Next Track
Press the SEEK up hard-key. The next track of the current
folder is played. Once the last track has been reached in Rewind Track
the forward direction, the unit will loop back to the first
Touch the Fast Reverse soft-key. The audio will be
track.
heard at a reduced level while going through the
track in this mode. Stop the fast reverse by releasing the
Fast Reverse soft-key.
MEDIA CENTER 730N (RHR)
97
Pause
Touch the PAUSE soft-key to pause the playback.
Information on the currently playing track, if available,
will be displayed on the right half of the screen.
Play
Touch the PLAY soft-key to start the playback.
If additional information is available, the NEXT soft-key
will be displayed. Touch the NEXT soft-key to show the
additional information.
Displaying the Elapsed Title Time
The elapsed title time of the currently playing track is Switch Device
Touch the DEVICES soft-key to switch to other connected
displayed on the left side of the screen.
devices.
Scan Search
Touch the SCAN soft-key.
iPod威 Menu
While in iPod威 mode, press the MENU hard-key to
The individual tracks will be played in succession for
access the iPod威 mode Menu.
eight seconds each.
Select the STOP SCAN soft-key to stop the scan function.
Track Info
Touch the INFO soft-key.
98
MEDIA CENTER 730N (RHR)
NOTE: For shuffle/repeat, settings will reflect current A red check mark indicates the random play function is
setting of device being accessed but can be changed active.
accordingly via the radio touch screen.
Repeat Track
The repeat track function repeats the currently played
track. Touch the Rpt. TRK soft-key to switch the repeat
track function on or off.
A red check mark indicates the repeat track function is
active.
Bluetooth姞 Audio Streaming Mode
The Bluetooth威 Audio Streaming mode gives you access
to the audio files on the external Bluetooth威 device. The
radio functions as a sound system for the currently
connected Bluetooth威 device, and you can play audio
from the device through the vehicles speaker system.
Random Playback
The random playback function plays random tracks from Before using the Bluetooth威 Audio Streaming mode, you
the iPod威 device. Touch the Shuffle soft-key to switch the will need to pair your compatible Bluetooth威 device to
random play function on or off.
the radio. (See Connecting Bluetooth威 Devices chapter.)
MEDIA CENTER 730N (RHR)
99
• Different generations of Bluetooth威 devices will support different levels of features (Scan, FF, RW, Play/
Pause, etc.). For devices that do not support these
features, the radio will not display the soft keys. Please
• It is recommended that you use the latest available
refer to the following websites for a listing of supsoftware for your Bluetooth威 device.
ported devices and device specific supported features:
• Not all Bluetooth威 devices are capable of Bluetooth威
www.chrysler.com, www.jeep.com, www.dodge.com
audio streaming.
or www.ramtrucks.com.
NOTE:
• The files will not be stored on the internal hard disk
drive and cannot be used in the HDD mode.
• Not all functions of a Bluetooth威 device can be con- See the Bluetooth威 device manufacturer website for
trolled by the radio. See the Bluetooth威 device manu- updates.
facturer website for updates.
100
MEDIA CENTER 730N (RHR)
Playing Audio Files from the iPod Device
You can play songs directly from the iPod device.
Select the desired device. The Bluetooth威 logo indicates a
Bluetooth威 device. For this example touch the myPhone
The Bluetooth威 logo indicates a connected Bluetooth威 soft-key.
device. While in AUX mode, touch the DEVICES soft-key
to see the connected devices.
MEDIA CENTER 730N (RHR)
101
SIRIUS Backseat TV™ (if equipped)
SIRIUS Backseat TV™ Mode
NOTE: SIRIUS Backseat TV™ is not available in
Canada, Hawaii or Alaska.
PAUSE
Touch the PAUSE soft-key to pause the Bluetooth威 audio
stream.
PLAY
Touch the PLAY soft-key to start the Bluetooth威 audio
stream.
102
MEDIA CENTER 730N (RHR)
Press the RADIO/MEDIA hard-key repeatedly until AM be in PARK for vehicles with automatic transmission. In
FM SAT TV is display at the top of the screen. Touch the vehicles with manual transmission the parking brake
must be engaged.
TV soft-key tab to access SIRIUS Backseat TV™.
In order to receive SIRIUS Backseat TV™ the vehicle
needs to be outside with a clear view to the sky. If the
screen shows Acquiring Signal, you might have to
change the vehicle position in order to receive a signal. In
most cases, the satellite radio does not receive a signal in
underground parking garages or tunnels.
In order to watch the desired SIRIUS Backseat TV™
channel, touch the VIEW VIDEO soft-key.
For vehicles equipped with VES™, refer to the VES™
section of the Uconnect™ User’s Manual on the DVD for
additional details.
Video Entertainment System (VES)™
Channel List
The navigation radio can remotely control the VES™.
Select LIST to display a list of available video channels.
Select HIDE LIST to hide the video channel list.
For vehicles equipped with VES™, refer to the VES™
section of the Uconnect™ User’s Manual on the DVD for
View SIRIUS Backseat TV™ on the Radio Screen
additional details.
NOTE: To view SIRIUS Backseat TV™ on the radio
screen, the vehicle must be stopped, and the shifter must
MEDIA CENTER 730N (RHR)
103
The VES tab becomes available after the VES™ system is
Receiving Audio/Video from the VES™
You can play audio from the VES™ through the vehicle’s turned on. Touch the VES MODES soft-key to select the
speaker system. If you have a VES™ with a video player, VES™ audio source.
you can also see the video on the radios display if the
vehicle is parked.
Touch the soft-key with the desired source to play in the
vehicle cabin.
104
MEDIA CENTER 730N (RHR)
Availability of the DVD Player soft-key, the Rear AUX 1 USB Connector
soft-key, and the Rear AUX 2 is based on the type of It is possible to transfer audio files or pictures files to the
navigation radio. Files can be on a disc or on a USB
VES™ in the vehicle.
device (e.g., USB stick). The USB connector is covered by
DVD Player is not available if there is no DVD player in
a small cover which protects the connector from dust or
the VES™ or there is no DVD in the player.
damage.
A device must be plugged into the AUX jack of the VES™
NOTE:
to be available.
• USB on the front of the radio and the one either in the
glove box (if equipped) or center console (if equipped)
A disabled soft-key indicates an unavailable source.
have identical functions.
Sending Audio/Video and controlling the VES™
The navigation radio can also control the VES™.
• USB devices (e.g., camera memory USB adaptors, etc.)
must comply with the MSD (Mass Storage Device)
All sources are played through the VES™ headphones.
standard. This USB terminal can provide power to the
For vehicles equipped with VES™, refer to the VES™
inserted device. The device’s current limitation must
section of the Uconnect™ User’s Manual on the DVD for
be less or equal to 1A.
additional details.
The transfer speed for this USB connector is approximately two megabytes per second.
MEDIA CENTER 730N (RHR)
Some player devices cannot be controlled through the How to open the cover
USB connector. Some player devices save music files in
MP4 format, which cannot be played in this radio. Some
copy protected music (e.g., downloads from the internet)
cannot be played on this radio.
Compatible Devices
Please see your authorized dealer or visit www.chrysler.com, www.jeep.com, www.dodge.com or www.ramtrucks.com for supported devices.
NOTE: Some MP3 players do not allow songs to be
copied into other devices.
1. Place finger under the pull arrow.
105
106
MEDIA CENTER 730N (RHR)
How to Close the Cover
2. Pull forward.
NOTE: The flap is attached and should not be removed! 1. Using your thumb and index finger, grasp the flap.
Do not pull the flap off of the frame. Do not use a tool Notice the hooks (1), which must first be inserted into the
(e.g., screw driver, nail file, etc.) to open the flap, as this frame.
could cause damage to the face of the radio.
MEDIA CENTER 730N (RHR)
2. Hook the top hooks (1) into the frame first.
107
3. Then push on the bottom of the flap to secure in place.
108
MEDIA CENTER 730N (RHR)
CAUTION!
Never force any connector into the ports of your
radio. Make sure your connectors are the identical
shape and size before you connect.
AUX Mode
The AUX connector allows you to connect the headset
output of an audio device (e.g., MP3 player) to the
navigation radio. The audio of the connected device will
then be played through the navigation radio sound
system.
Connect a 3.5 mm stereo mini-jack cable as shown above
(not provided with the radio) to the AUX connector on
the navigation radio and to the earphone connector of
your audio device.
MEDIA CENTER 730N (RHR)
The display will switch automatically to the AUX mode
when a 3.5 mm stereo mini-jack cable has been connected.
The radio screen will revert back to the last tuner mode
when the cable is unplugged.
109
The control of the external device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead.
NOTE: Inserting a mono jack will result in improper
To change radio modes while the cable is connected to audio playback.
the unit, press the RADIO/MEDIA hard-key until the
AUX tab is displayed on the top of the screen. Touch the
AUX tab to return to the AUX mode.
Adjust the volume with the ON/OFF VOLUME rotary
knob, or with the volume of the attached device.
110
MEDIA CENTER 730N (RHR)
VOICE COMMAND
When you press the Voice Command
hard-key, you will hear a beep. The beep is
your signal to give a command.
Voice Command Operation
Voice Command allows you to control your AM and FM
radio, satellite radio, disc player, navigation system, hard
NOTE: If you do not say a command within a few
disk drive storage, AUX mode devices (digital music
seconds, the system will present you with a list of
players) and a memo recorder.
options.
NOTE: Take care to speak into the Voice Command
If you ever wish to interrupt the system while it lists
system as calmly and normally as possible. The ability of
hard-key, listen
options, press the Voice Command
Voice Command to recognize user voice commands may
for
the
beep,
and
say
your
command.
be negatively affected by rapid speaking or a raised voice
level.
hard-key while the
Pressing the Voice Command
system is speaking is known as “barging in.” The system
WARNING!
will be interrupted and you can add or change commands. This will become helpful once you start to learn
Any voice commanded system should be used only
in safe driving conditions and all attention should be the options.
kept on the roadway ahead. Failure to do so may
result in an accident causing serious injury or death.
NOTE: At any time you can say the words CANCEL,
REPEAT, HELP, or MAIN MENU.
MEDIA CENTER 730N (RHR)
111
These commands are universal and can be used from any At any point, if the system does not recognize one of your
menu or screen.
commands, you will be prompted to repeat it.
All other commands can be used depending upon the
active application.
For example: If you are in the navigation menu and you
are listening to FM radio, you can speak commands from
the navigation menu or from the FM radio menu.
Certain commands displayed 2 or 3 levels deep can be
used immediately after pressing the VR button for
quicker result. For example…………Sat audio > Select
Name > Sirius Hits 1…. can be shortened to …..Sat
Audio>Sirius Hits 1
When using this system, you should speak clearly and at
a normal speaking volume.
The system will best recognize your speech if the windows are closed and the heater/air-conditioning fan is
set to low.
NOTE: At any time you can say the words CANCEL,
REPEAT, HELP, or MAIN MENU. These commands are
universal and can be used from any menu or screen. All
other commands can be used depending upon the active
application. When using this system, you should speak
clearly and at a normal speaking volume. The system will
best recognize your speech if the windows are closed and
the heater/air-conditioning fan is set to low. At any point,
if the system does not recognize one of your commands,
you will be prompted to repeat it.
To hear the first available Menu, press the Voice
hard-key and say HELP or MAIN
Command
MENU.
112
MEDIA CENTER 730N (RHR)
Display Menu
In addition to audible help, the navigation radio is able to
display the most important available commands on the
screen.
Commands
The Voice Command understands two types of commands. Universal commands are available at all times.
Local commands are available if the supported radio
mode is active.
Changing the Volume
1. Start a dialogue by pressing the Voice Command
hard-key.
2. Say a command (e.g., HELP).
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Command
system is speaking.
Main Menu
Start a dialogue by pressing the Voice Command
hard-key.
You may say MAIN MENU to switch to the main menu.
MEDIA CENTER 730N (RHR)
113
• In this mode you can say the following commands:
• RADIO FM (to switch to the FM band)
• RADIO (to switch to the radio mode)
• SATELLITE RADIO (to switch to the satellite radio)
• HARD DRIVE (to switch to the HDD mode)
Radio AM
To switch to the AM band say AM or RADIO AM.
• DISC (to switch to the disc mode)
• VES (to switch to the VES™ mode)
• MEMO (to switch to the memo recorder)
• NAVIGATION (to switch to the navigation mode)
• SYSTEM SETUP (to display the system setup menu)
Radio Menu
You may say RADIO to switch to AM, FM, or SAT.
Say RADIO MENU.
• In this mode you may say the following commands:
• RADIO AM (to switch to the AM band)
In this mode you may say the following commands:
• FREQUENCY (to change the frequency)
• NEXT STATION (to select the next station)
• PREVIOUS STATION (to select the previous station)
• RADIO MENU (to switch to the radio menu)
• MAIN MENU (to switch to the main menu)
Radio FM
To switch to the FM band say FM or RADIO FM.
In this mode you may say the following commands:
• FREQUENCY (to change the frequency)
114
MEDIA CENTER 730N (RHR)
• NEXT STATION (to select the next station)
• MAIN MENU (to switch to the main menu)
• PREVIOUS STATION (to select the previous station)
SIRIUS Backseat TV™
To switch to SIRIUS Backseat TV™ mode say SATELLITE
VIDEO. In this mode you may say the following commands:
• RADIO MENU (to switch to the radio menu)
• MAIN MENU (to switch to the main menu)
Satellite Radio
• STATION (256-258) (to change the station)
To switch to satellite radio mode say SAT or SATELLITE
• NEXT STATION (to select the next station)
RADIO. In this mode you may say the following com• PREVIOUS STATION (to select the previous station)
mands:
• STATION (1-250) (to change the station)
• LIST STATIONS (to hear a list of available stations)
• NEXT STATION (to select the next station)
• SELECT NAME (to change to the station named)
• PREVIOUS STATION (to select the previous station)
• RADIO MENU (to switch to the radio menu)
• LIST STATIONS (to hear a list of available stations)
• MAIN MENU (to switch to the main menu)
• SELECT NAME (to change to the station named)
• RADIO MENU (to switch to the radio menu)
MEDIA CENTER 730N (RHR)
Disc
To switch to the disc mode say DISC.
In this mode you may say the following commands:
• TRACK (1-250) (to change the track)
• NEXT TRACK (to play the next track)
• PREVIOUS TRACK (to play the previous track)
• MAIN MENU (to switch to the main menu)
Hard Drive
To switch to the HDD mode say HARD DRIVE.
In this mode you may say the following commands:
• TRACK (1-250) (to change the track)
• NEXT TRACK (to play the next track)
• PREVIOUS TRACK (to play the previous track)
• MAIN MENU (to switch to the main menu)
115
AUX Mode
To switch to the AUX mode say AUX. In this mode you
may say the following commands:
• TRACK (1-250) (to change the track)
• NEXT TRACK (to play the next track)
• PREVIOUS TRACK (to play the previous track)
• LIST DEVICES (to list connected devices)
• UCONNECT DEVICE SETUP (to pair a device or to
select a device)
• MAIN MENU (to switch to the main menu)
AUX Mode (with synced device attached)
If the attached AUX device is capable of syncing a table of
contents of the attached device to the radio, you may say
the following additional commands:
116
MEDIA CENTER 730N (RHR)
• PLAY COMMANDS (to display a list of possible voice • PLAY SIMILAR SONGS (to play similar songs)
commands)
VES™
• PLAY TRACK plus the desired track name (to play To switch to the VES™ mode say V E S.
songs by track)
In this mode you may say the following commands:
• PLAY ALBUM plus the desired album name (to play
• VES
songs by album)
• VES REMOTE LOCK (to lock the VES™ remote)
• PLAY ARTIST plus the desired artist name (to play
songs by artist)
Memo
To switch to the voice recorder mode say MEMO.
• PLAY GENRE plus the desired genre name (to play
songs by genre)
In this mode you may say the following commands:
• PLAY PLAYLIST plus the desired playlist name (to • NEW MEMO (to record a new memo)
play playlists by name)
During the recording you may press the Voice
• PLAY AUDIO BOOK plus the desired audio book
hard-key to stop recording. You proCommand
name (to play audio books by name)
ceed by saying one of the following commands:
• PLAY PODCAST plus the desired pod cast name (to
play pod cast by name)
− SAVE (to save the memo)
MEDIA CENTER 730N (RHR)
− CONTINUE (to continue recording)
− DELETE (to delete the recording)
• PLAY MEMOS (to play previously recorded memos)
117
Navigation
To switch to the navigation mode say NAVIGATION.
NOTE: Not all commands will be available at all times,
depending upon the system context.
During the playback you may press the Voice
NOTE: Read the navigation chapter first to help you
hard-key to stop playing memos. You
Command
understand the functionality of the available commands.
proceed by saying one of the following commands:
You may say:
− REPEAT (to repeat a memo)
• DESTINATION ENTRY
− NEXT (to play the next memo)
− GUIDE ME TO A NAME
− PREVIOUS (to play the previous memo)
− STREET ADDRESS
− DELETE (to delete a memo)
• INPUT COUNTRY
• DELETE ALL (to delete all memos)
• INPUT STATE
NOTE: Keep in mind that you have to press the Voice
• INPUT CITY NAME
hard-key first and wait for the beep,
Command
before speaking the “barge in” commands.
• INPUT STREET NAME
118
MEDIA CENTER 730N (RHR)
• INPUT HOUSE NUMBER
− INTERSECTION
− POINT OF INTEREST
− RECENT DESTINATIONS
• ROUTING OPTIONS
− GO
• FIND NEARBY POI
− STOP ROUTING
• FIND POI NEAR DESTINATION
− MUTE GUIDANCE
• FIND WITHIN A CITY
− REPEAT GUIDANCE
• INPUT PHONE NUMBER
− CHANGE METHOD
• SELECT POI ICONS
• FASTER ROUTE
• FIND POI (Say POI name if known)
• SHORTER ROUTE
− ADVANCED INPUT
• INPUT ZIP CODE
• TRAVEL INFO
• MAP OPTIONS
• INTERSECTION
• MAP
• CANCEL DESTINATION ENTRY
• ZOOM IN
MEDIA CENTER 730N (RHR)
• ZOOM OUT
• ADDRESS BOOK
119
• VOICE TRAINING
• HELP SCREEN
− NEW ENTRY
− ON
− NAVIGATE TO A NAME
− OFF
− DELETE
• TUTORIAL
− ERASE ALL
Voice Training
For users experiencing difficulty with the system recognizing their voice commands or numbers, the Uconnect™
Phone system Voice Training feature may be used.
System Setup
To switch to the system setup say SETUP.
You can say:
• LANGUAGE
− ENGLISH
− SPANISH
− FRENCH
hard-key, say “SYS1. Press the Voice Command
TEM SETUP” and once you are in that menu then say
“VOICE TRAINING.”
This will train your own voice to the system and will
improve Command.
120
MEDIA CENTER 730N (RHR)
2. Repeat the words and phrases when prompted by the • Touch the Reset Voice Command System to Factory
Uconnect™ Phone system. For best results, the Voice
Defaults when you would like to restore the Voice
Training session should be completed when the vehicle is
Command system to factory default settings.
parked, engine running, all windows closed, and the
• Touch the Start Voice Training soft-key to train the
blower fan switched off.
Voice Command system.
This procedure may be repeated with a new user. The
• Touch the Listen to Tutorial soft-key to hear instrucsystem will adapt to the last trained voice only.
tions on voice training.
If the system does not understand the words VOICE
NOTE: With rolled down windows, the system perforTRAINING:
mance may be compromised.
1. Press the MENU hard-key.
In a convertible vehicle, the system performance may be
compromised with roof top down.
2. Press System Setup.
3. Press the Voice Command soft-key to access the Voice
Command menu.
• Touch the Show Help Screens During Voice Command
Sessions to show or hide the help screens when using
the speech dialog system.
The rear view mirror top should be at least a half of an
inch below the overhead console.
MEDIA CENTER 730N (RHR)
Uconnect™ Phone
Uconnect™ Phone is a voice-activated, hands-free, in
vehicle communications system.
121
The Uconnect™ system is fully integrated with the
vehicle’s audio system. The radio display will be used for
visual prompts from the Uconnect™ system such as
phone battery status, signal strength, caller ID, and call
type. Uconnect™ Phone allows you to dial a phone
number with your cellular phone using simple voice
commands (e.g., “Call” … “Jim” …Work” or “Dial” …
“248-555-1212”). Your cellular phone’s audio is transmitted through your vehicle’s audio system; the system will
automatically mute your radio when using the
Uconnect™ Phone system.
Safety advice: While the vehicle is parked, practice the
use of the Uconnect™ Phone system until you are
familiar with its functionality.
122
MEDIA CENTER 730N (RHR)
Phone System Setup – Pairing
2. Then touch the System Setup soft-key to get to the
1. Press the MENU hard-key on the right side of the System Setup menu.
radio.
MEDIA CENTER 730N (RHR)
3. Touch the Device Pairing soft-key to access the This menu lists all paired Bluetooth devices.
Bluetooth Devices menu.
4. Press the PAIR soft-key to start a new pairing.
123
124
MEDIA CENTER 730N (RHR)
5. You can use the BACK soft-key to switch to the
previous menu.
7. The pairing procedure starts. Refer to the user’s
manual of your Bluetooth phone to complete the procedure on your phone. During this process you need to
6. Enter any 4 Digit Security PIN and touch the PAIR
enter your Security Pin into the phone.
soft-key again.
MEDIA CENTER 730N (RHR)
125
8. You will then be asked to set a priority for the paired 9. You may now change the device name.
phone. If there is more than one paired phone available,
NOTE: Note: You can enter up to 20 characters.
the navigation radio will try to connect to the phone with
the highest priority setting.
10. Touch the SAVE soft-key to confirm the device name.
126
MEDIA CENTER 730N (RHR)
12. Touch the phonebook update soft-key to download
the phone book into the radio.
NOTE: If the phone book download feature is supported by your cell phone, only the first 1000 contacts
will be automatically copied to the radio. Contacts will be
downloaded from your SIM card first and then copied
from your phones default phone book. The phone book
will automatically download upon initial pairing, after
the phone is paired once you may use the download
soft-key to update the phone book in the radio.
11. You may rename the device, set it as active phone, if
more than one device is connected, modify the phone
priority, or delete the pairing.
MEDIA CENTER 730N (RHR)
127
Navigation Software
This navigation radio requires digital data from a naviGeneral Notes
gation database. The data in the navigation database is
System Overview
licensed from Navigation Technologies威. Not all roads
Your navigation system receives GPS signals from up to are digitized.
16 satellites to display the position of your vehicle. Map
Navigation Database
and database information is supplied through a hard disk
The navigation unit is provided with a navigation datadrive. A gyroscope and the vehicles speed sensor enable
base on the internal hard drive. The database contains
the system to display the present vehicle position even in
data for the continental USA, some of the major cities in
locations where GPS signals may be blocked.
Canada, Alaska, parts of Hawaii, and Puerto Rico.
When you input a destination, the navigation system
WARNING!
uses map data from the hard disk drive to quickly
calculate a route. As you drive along your chosen route,
Drive with caution, paying attention to the road,
you are guided with pictorial displays and voice
obeying all traffic laws!
prompts.
Uconnect™ GPS Navigation
128
MEDIA CENTER 730N (RHR)
2. Press the NAV hard-key to switch to the navigation
System Limitations
The map data that is included with your system is the menu and toggle between Map Viewer and Navigation
most recent available at the time of production. Because Main Menu.
of changes in streets, neighborhoods, and business locations, there may be situations where the navigation
system is not able to route you to your desired destination by the entry method you have chosen. If this occurs,
choose another entry method.
Selecting Navigation Mode Press the NAV hard-key to
toggle between Navigation MAIN MENU and Navigation MAP.
Navigation Main Menu
Selecting NAV Main Menu
1. If not already done, press the ACCEPT soft-key to • New Destination
agree to the navigation disclaimer.
Touch this soft-key when you want to program a
destination. (See the Destination Input section for
details).
MEDIA CENTER 730N (RHR)
• Recent Places
Touch this soft-key when you want to route to a
destination you programmed before. (See the Destination Input section for details).
• My Trips
Touch this soft-key when you want to program or save
trips with multiple destinations. (See the My Trips
section for details).
• Guide Me Home
129
• Favorite POI’s
Touch this soft-key when you want to enter a point of
interest from a preselected favorite POI category list,
which is also available while the vehicle is in motion.
(See the Favorite POI section for details).
• Emergency Info
Touch this soft-key when you want to route to an
emergency facility near to the current location of your
vehicle. You may list fire stations, police stations,
hospitals and Chrysler dealerships. (See the Emergency Info section for details).
Touch this soft-key when you want to route to your
home destination. (See the Guide Me Home section for
• Where Am I Now?
details).
Touch this soft-key when you want to find out where
• Point of Interest
you are, and when you need to search for an available
Touch this soft-key when you want to route to a point
point of interest near your current vehicle position.
of interest. (See the POI section for details).
(See the Where Am I Now section for details).
130
MEDIA CENTER 730N (RHR)
• MAP
It is possible to spell only names contained in the
database. Unavailable letters are in a lighter color and are
Touch this soft-key when you want to display a map of
not selectable. If the desired street name is shown comyour current position. (See the Map Viewer section for
pletely, touch the CONTINUE soft-key to proceed. If
details).
there are only a few choices left, you may touch the LIST
soft-key to display a list of street names.
Inputting Information
Names (e.g., city names or street names) are entered with
IMPORTANT NOTE: Use the space symbol as a space
a smart speller.
between words (e.g., NEW_YORK_CITY).
NOTE: Touch the DEL soft-key to delete a misspelled
letter or press the NAV hard-key to go back to the
Navigation Main Menu.
NOTE: Touch the 0-9 soft-key to access numbers, and
touch the MORE... soft-key to access special characters, if
needed.
MEDIA CENTER 730N (RHR)
131
WARNING!
For your own safety and the safety of others, it is not
possible to use the speller while the vehicle is in
motion.
Destination Input by POI
The Point of Interest database allows you to select a
destination from a list of locations and public places, or
points of interest (POI).
Press the NAV hard-key to access the NAV Main Menu.
A point of interest (POI) can be found in different ways;
Close to the current vehicle position (POI Local Area),
close to the currently active destination (Nearby Destination), within the map database (POI in Map Area), by POI
name, by phone number, and within a city.
132
MEDIA CENTER 730N (RHR)
POI Local Area
For this example we will continue by entering a gas
station close to the vehicle location.
2. Touch the NEARBY POI soft-key.
NOTE: Nearest POI can also be found by simply
1. While you are in the NAV - Main Menu touch the selecting “Point of Interest” instead of the “Where Am I
Where AM I Now? soft-key. The navigation radio dis- Now?” soft key.
plays your current location on a map, and the location Select a POI category. For this example select Gasoline.
information (e.g., latitude, longitude, elevation, road
name, city, state, if available).
MEDIA CENTER 730N (RHR)
133
3. Select one of the Gas Stations from the list and confirm
your route by touching the GO soft-key in the confirmation screen.
POI Nearby Destination
For this example we will continue by entering a gas
station close to the currently entered destination.
NOTE: Some categories may be disabled while the
vehicle is in motion.
The POI list shows the POI address, the distance to the
POI (direct aerial distance), and a directional arrow.
134
MEDIA CENTER 730N (RHR)
1. While the system is in guidance mode, touch the
OPTIONS soft-key.
3. Touch the Find POI Near destination soft-key and
select a category. Pick a gas station from the list and
confirm the destination. This is the same process as
2. Touch the Destination Info soft-key to select the Des- described in the POI Local Area section.
tination Info menu.
POI in Map Area
To select a POI from anywhere on the navigation database map area, select Point of Interest in the NAV – Main
Menu screen.
MEDIA CENTER 730N (RHR)
135
Touch the soft-key with the desired category to display a
list of Points of Interest.
NOTE: The length of the lists are limited to five pages
while the vehicle is in motion.
Favorite POI Categories
NOTE: For your safety, the number of displayed POIs
may be limited in certain screens, while the vehicle is in
motion.
You can find POIs by the POI name, by type, by the
phone number, or by entering a city name.
POI by Type
To select a POI by type, select Point of Interest in the NAV
– Main Menu screen, and then touch the Select Type from
List soft-key.
For easier access to POIs while the vehicle is in motion,
you may define your own POI category list.
136
MEDIA CENTER 730N (RHR)
The Favorite POIs screen shows the available categories.
1. Touch the Favorite POIs soft-key in the NAV – Main
2. You may select ADD to add more categories.
Menu screen.
You may select EDIT LIST to either clear all, clear
selected, or move POI categories in the list.
MEDIA CENTER 730N (RHR)
137
Destination Input
Press the NAV hard-key to access the NAV Main Menu.
Select CLEAR ALL to delete all categories from the list.
Edit a category soft-key by touching the soft-key with the
category you would like to edit. If you select Clear in the
next screen the soft-key will be removed from the list. If
you select Move, you may change the position of the
soft-key in the list.
Touch the New Destination soft-key to get to the Destination Input Screen
NOTE: Once you start the destination input you can
touch the CANCEL soft-key to cancel the destination
input process.
138
MEDIA CENTER 730N (RHR)
Overview Destination Entry Screen
Point on Map allows quick and easy selection of a
destination directly from the Map screen. By selecting a
street segment or icon, you can quickly enter a destination without the need to input the city name or street.
Use Saved Trail to access previously saved trails. Review
the Trails section in this manual to learn more about
trails.
A Street Address or a street name with house number.
At this point, you need to decide what type of destination
you would like to enter.
NOTE: If you select a street without knowing a house
number or the house number cannot be entered, the
navigation radio will guide you to the closest end location on the entered street.
Intersection allows you to enter two street names.
Use Favorite Place and Address Book to access previ- Use City Center if you want directions to a particular
ously saved addresses or locations. Review the Address city. The navigation system will calculate a route with the
Book section in this manual to learn more about the destination at the center of the city.
address book.
MEDIA CENTER 730N (RHR)
139
Geo Coordinates
A geo coordinate is a coordinate used in geography.
You can determine a geo coordinate with the help of a
handheld GPS receiver, a map, or the navigation system.
Destination Input by Street Address
For this example we will continue by entering the following address 2101 CONSTITUTION AVE NW, WASHINGTON D.C., DC 20037, U.S.A.
1. Touch the Street Address soft-key to get to the Street
Address menu.
This menu shows the default country and state settings.
Changing State/Province and/or Country
If your destination is not in the displayed state and/or
country, either enter a city name by touching the USA
soft-key in the second row, or the ZIP code (if known), by
touching the USA soft-key in the third row of the screen.
140
MEDIA CENTER 730N (RHR)
You can change the state/province and/or country temporarily for the current destination input by touching the
STATE, PROVINCE, or COUNTRY soft-key in this menu.
NOTE:
• A pop-up will appear asking whether or not you
would like the new state, province, or country to be
the default.
• It is recommended to change the default state and/or
default country, if you plan to enter more than one
destination in the destination area (e.g., vacation,
business travel, etc.).
Enter W into the speller and select WASHINGTON D.C.,
1. If the COUNTRY is not set to USA, touch COUNTRY, DC from the list. Once selected, a CHANGE soft-key will
appear in the lower right corner of the screen. Touch
and touch the USA soft-key for this example.
CHANGE to confirm your selection.
2. For this example touch STATE and change the state to
Washington D.C.
MEDIA CENTER 730N (RHR)
3. Once the country is set to USA and the state is set to
WASHINGTON D.C., touch the WASHINGTON D.C.
soft-key in the first row of the Street Address screen. This
will allow you to input the street name in Washington
D.C.
141
Touch the C soft-key in the speller, to enter the first letter
of the street name (CONSTITUTION AVE NW). In the
upper right corner the number of possible roads decreases.
4. Touch the LIST soft-key to display a list of possible
street names. Select CONSTITUTION AVE NW from the
list to get to the Input Number menu.
142
MEDIA CENTER 730N (RHR)
The speller displays only numbers contained in the
digital map.
5. In this example we have entered 2101 as the house
number. Touch the CONTINUE soft-key to get to the
Confirm Route screen.
If you touch the CONTINUE soft-key without entering a
number, the navigation system will guide you to a
section of the entered street which is the closest to your
current location.
In the Confirm Route screen the navigation radio displays the complete address, a map of the destination
area, and the current routing method for you to verify.
MEDIA CENTER 730N (RHR)
NOTE:
• If the displayed address is not the desired address, you
can either touch the BACK soft-key in the upper left
corner of the screen to step back to the previous
screens, press the NAV hard-key to start over from the
NAV - Main Menu, or touch CANCEL to cancel the
destination input.
• Pressing the Option soft key while in the Confirm
Screen will also allow you to select alternative routes.
You will have an option to choose 1 of 2 quickest
routes or 1 of 2 shortest routes (depending on the route
method currently selected).
6. Touch the GO soft-key to activate the route guidance.
To read more about the OPTIONS soft-key in this menu,
see the NAV Options section of this manual.
143
Destination Input by Intersection
For this example we will continue by entering the following intersection: Kaufman Ln and Bridwell Dr, in Louisville, Kentucky.
1. From the Destination Entry menu touch the Intersection soft-key to get to the Find Intersection menu.
144
MEDIA CENTER 730N (RHR)
NOTE: If Kentucky is not your default state refer to the 3. Touch the Enter Name of Street 1 soft-key to enter the
change state/province and/or country section to learn first street.
how to change state/province and/or country.
4. Enter “Kaufman Ln” into the speller and confirm the
It is possible to select the intersection within the whole name.
country, a city, or a ZIP code area.
2. For this example touch the Within KENTUCKY softkey.
5. Touch the Enter Name of Street 2 soft-key to enter the
second street. The navigation radio will display a list of
possible cross streets of the initially entered street.
MEDIA CENTER 730N (RHR)
6. Select “Bridwell Dr” for this example.
145
If you wish to change your mind and prefer to select a
different cross street, you can touch the soft-key with the
cross street name to select another cross street.
7. Touch CONTINUE to confirm the intersection and
touch GO in the Confirm Route To screen to start the
route guidance.
146
MEDIA CENTER 730N (RHR)
NOTE: If the first street of the intersection was not Destination Input by Favorite Places
entered accurately, the second street may not be found. Touch the Favorite Places soft-key in the Destination
Entry Menu.
Destination Input by Geo Coordinate
Touch the Geo Coordinate soft-key in the Destination NOTE: The Favorite Places soft-key is disabled if the
Entry screen.
favorite places memory is empty. To fill the favorite
places memory, you must save a location as a Favorite
Place from the Where Am I Now? Menu or by saving
current destination in the NAV options screen in after a
destination has already been entered.
To enter a Geo Coordinate as a destination, simply touch
the Lat: soft-key and enter the latitude, then touch the
Long: soft-key to enter the longitude.
MEDIA CENTER 730N (RHR)
147
Favorite Places menu touch the EXIT soft-key. To go back
to the Main Menu touch the back soft-key in the upper
left corner of the screen.
Destination Input by Address Book
Touch the Address Book soft-key in the Destination Entry
screen.
Touch the soft-key with the name of the desired destination and confirm the route with GO to start the route
guidance.
Touch the EDIT LIST soft-key to delete either all or single
entries off the Favorite Places list. To exit the Edit
148
MEDIA CENTER 730N (RHR)
Select a folder or touch SEARCH to search for the desired
contact to enter the destination (see the Address Book
section in this manual for more information).
Destination Input by Point on Map
This feature allows quick and easy selection of a destination directly from the map screen. By selecting a street
segment or POI icon, you can quickly enter a destination
without the need to input the city name or street.
NOTE: This feature is also available while the vehicle is
in motion.
1. Touch the MAP soft-key in the NAV - Main Menu to After touching the map on the screen, a set of arrows
appears.
access the map.
2. Use the arrows to navigate the center of the cross over
the desired destination.
3. Either touch the SELECT soft-key to select the destination, or touch the POIs soft-key to see a list of POIs in
the selected area.
MEDIA CENTER 730N (RHR)
149
See the Record New Trail section in this manual for more
Destination Input by Saved Trails
Touch the Saved Trails soft-key in the Destination Entry information.
menu.
Destination Input by Recent Places
NOTE: The Saved Trails soft-key is disabled if the trails Touch the Recent Places soft-key in the NAV Main Menu.
memory is empty. To fill the trails memory, you must
save a trail.
Touch the soft-key with the name of the desired destination and confirm the route with GO to start the route
guidance.
150
MEDIA CENTER 730N (RHR)
Touch the EDIT LIST soft-key to delete either all or single
entries off the recent destination list. To exit the Edit
Recent Destinations menu touch the EXIT soft-key. To go
back to the Main Menu touch the Back soft-key in the
upper left corner of the screen.
Destination Input by Voice
Read the Voice Command System section for details.
1. Press the Voice Command
beep and say NAVIGATION.
hard-key. Wait for the
The navigation radio will respond, saying: “Navigation.”
The navigation radio has switched to the navigation
mode and is now ready to receive navigation-related
voice commands. For this example, the default country is
set to the U.S. and the default state is set to Michigan.
2. Press the Voice Command
beep. Say INPUT STREET.
hard-key, wait for the
The radio will respond: “for Michigan. Please say the
name of the street.”
3. Wait for the beep and say, LOLLY POP STREET
(example).
The radio will respond: “Do you mean Lolly Pop Street?”
4. Wait for the beep and say YES.
The radio will respond: “Line one. Now, do you want to
enter a city?”
5. Wait for the beep and say YES.
The radio will respond: “For Lolly Pop Street. The only
city that could be found is Westland, Michigan. Do you
want to use this city?”
6. Wait for the beep and say, YES.
The radio will respond: “City name has been accepted.
Now, do you want to enter a house number?”
MEDIA CENTER 730N (RHR)
151
See the Getting Started and Address Book section in this
manual for information on how to save, clear, or edit the
The radio will respond: “Now, do you want to start route
home address.
guidance?”
Where Am I Now?
8. Wait for the beep and say YES.
The Where Am I Now? menu displays location informaThe radio will start the route guidance to Lolly Pop tion for the current vehicle position.
Street, in Westland, Michigan.
Touch the NEARBY POI soft-key to search for a local POI.
While you drive towards the destination, you may press
Touch the SAVE LOCATION soft-key to save the current
the Voice Command hard-key, wait for the beep and say
location in the Saved Locations memory.
TRAVEL INFO.
7. Wait for the beep and say NO.
The radio will respond with your estimated time of
arrival and the distance to the entered destination.
Guide Me Home
Touch the Guide Me Home soft-key in the NAV - Main
Menu, and touch the GO soft-key to confirm the route to
the home address saved in the address book.
152
MEDIA CENTER 730N (RHR)
1. Touch the Emergency Information soft-key in the NAV
- Main Menu.
2. Select hospitals, police stations, fire departments or
dealerships.
3. Read and confirm the disclaimer.
WARNING!
Save the current location in the Favorite Places folder of
the Saved Locations memory, in the Address Book, in the
My Trips memory, or as the home address.
Emergency Info
Use this function to locate emergency Points of Interest,
e.g. hospitals/medical facilities, police stations, fire departments, or dealerships.
The distances displayed in the Emergency facility
lists are aerial distances. In some cases the road
distance to the facility may vary. Actual road distances will be displayed after a specific destination is
selected and the route planning is completed. In
unverified areas the route selected may not be the
quickest route to your destination!
MEDIA CENTER 730N (RHR)
Touch the CALL 911 soft-key to dial 911 with a cellular
phone connected via Uconnect™ Phone. See the
Uconnect™ Phone section in this manual for more information on Uconnect™ Phone.
153
NOTE: The Start/Stop Trail button is not visible during
and shortly after a route guidance announcement (intersection zoom) and the map view settings are set to Turn
by Turn.
Record New Trail
The trail function is a feature that allows you to log and
save a trail in non-digitized areas.
NOTE: It is recommended to start the trail into a
non-digitized area from a digitized road.
1. Touch the MAP soft-key in the NAV Main Menu to
access the map.
NOTE: The Start/Stop Trail button is in the lower right
corner of the screen if a route guidance is active and the
map view settings are set to Turn List.
2. Touch the Record Trail soft-key in the lower right
corner of the map viewer screen to record a route.
154
MEDIA CENTER 730N (RHR)
3. Touch the Stop Trail soft-key to stop the trail recording.
The Record Trail soft-key will switch to the Stop Trail
soft-key and the trail appears as a yellow line on the map
screen while you drive along a route. Maneuver points
(bread crumbs) are marked as yellow dots. The start
point is marked with a green dot, the stop point is
marked with a red dot.
• Touch Discard Current Trail to discard the trail and
stop the recording.
• Touch Continue Recording Trail to continue the
recording.
MEDIA CENTER 730N (RHR)
4. Touch Stop and Save Current Trail.
155
5. Touch the Change Name soft-key to edit the trail
name.
6. Touch the EXIT soft-key to save the trail recording
without changing the name.
The trail recording is now saved in the Saved Trails
Memory.
NOTE:
• You can save up to 12 trails. If the trail memory is full,
you must discard one of the previous recorded trails in
order to record a new trail.
• The Start/Stop Trail button is not visible during intersection zoom and when the map view settings are set
The trail will be named with time and date of the
to Turn by Turn.
recording.
156
MEDIA CENTER 730N (RHR)
Route Guidance to a Recorded Trail
The Saved Trails Memory is accessible in the Destination
Entry menu. The route guidance will allow you a choice
to route to the start or end of the pre-recorded trail.
Touch the Saved Trails soft-key.
MEDIA CENTER 730N (RHR)
157
Touch the trail point soft-key to toggle
between the start-point and the endpoint of a trail.
Touch the GO soft-key to start the route guidance to the
selected destination.
You may touch the EDIT soft-key to change the trail
name or to delete trails from the My Saved Trails list.
Select the desired trail.
158
MEDIA CENTER 730N (RHR)
Once you arrive at the destination (green dot, destination Route Guidance
After starting route guidance, the system calculates the
icon), the route guidance will end.
route and announces: “Follow the arrows on the display.”
You will receive navigation recommendations by voice
messages and screen displays.
You may now follow the trail on the screen. The trail will
be displayed until you touch the STOP TRAIL soft-key in
the Navigation Main Menu.
Navigation View Settings
Press the MENU hard-key to select the NAV Menu.
MEDIA CENTER 730N (RHR)
159
Touch the Turn by Turn soft-key to display turn arrows
and intersection zooms on the right half of the screen.
Touch the Turn List soft-key to display a list of upcoming
turns on the right half of the screen.
NOTE: Touch the Map View soft-key in any Radio
Menu screen to enable the map view mode, where the
navigation map or turn-by-turn navigation can be displayed on the right half of the radio screen (see Display
Settings for more information).
Touch the Full Map soft-key to display a full map during
route guidance.
160
MEDIA CENTER 730N (RHR)
Map Items
• Touch the Next Turn Info soft-key to show or hide the
Press the Map Items soft-key in the NAV Menu to access
next turn soft-key and the next turn information bar.
the Display Items on Map menu.
• Touch the Current Road Info soft-key to show or hide
the NOW ON soft-key and the current road information bar.
• Touch the Time Remaining soft-key to show or hide
the estimated time remaining until you reach your
destination.
• Touch the Time of Arrival soft-key to show or hide the
estimated time of arrival at your destination.
Touch the SAVE soft-key to save your changes.
POI Icons on the Map
The navigation radio is able to display available points of
• Touch the Map Buttons soft-key to show or hide the
interest on the map. Touch the Select POI Icons soft-key
Zoom, Map Heading, 2D/3D View and the Button
to show a list of point of interest icons.
Minimize soft-key.
MEDIA CENTER 730N (RHR)
161
162
MEDIA CENTER 730N (RHR)
Touch the icon soft-key to show or hide an icon on the Repeat Navigation Announcement
map.
Touch the RPT soft-key in the upper right corner of the
navigation screen to hear the current navigation
announcement.
MEDIA CENTER 730N (RHR)
Automatic Re-Routing
If you miss a turn while navigating, the navigation radio
will automatically adjust your route.
163
In the left half of the screen, the current position and the
current routing method are displayed.
The Take Detour soft-key will allow you to calculate a
different route.
Route Options
After pressing the OPTIONS soft-key in the Route GuidTouch the Find Nearby POI soft-key to search for a local
ance Menu, the following information is displayed:
POI.
The Destination Info soft-key displays destination information.
The View Turn List soft-key lists streets utilized for the
current route.
Touch the Save Destination to save the destination address.
The Change Method soft-key will allow you to change
the routing method.
164
MEDIA CENTER 730N (RHR)
Canceling Route Guidance
Unverified Navigation Database Area
The current route guidance can be aborted at any time by Unverified areas are roads that are included in the
pressing the STOP ROUTING soft-key in the NAV-Main database but have not been verified.
Menu.
Route guidance in an unverified area is different from the
guidance you receive in a detailed, verified area. When
traveling in an unverified area, turn-by-turn guidance,
voice prompts and a route are only route guidance
suggestions.
In an unverified map area, the navigation system is
unaware of turning restrictions e.g. one way roads, or
where turns are not permitted.
Touch the YES soft-key to confirm the cancellation, or
touch the NO soft-key to keep the route guidance.
MEDIA CENTER 730N (RHR)
165
WARNING!
Danger of Accident! DO NOT IGNORE TRAFFIC
LAWS. If a driving recommendation contradicts the
traffic laws, the laws ALWAYS take precedence!
“Make a U-turn if possible.” - You are driving in the
wrong direction and should turn around at the earliest
legal opportunity.
“Follow the arrows on the display.” - This display tells
you that you are currently in an area, such as a parking
NOTE: A warning message may appear on the screen lot, garage, etc., that is not contained on the digital street
every time you enter an area with unverified navigation map. The arrow indicates the actual geographic direction
to the destination.
database data.
Notes on Route Guidance
During navigation you will receive voice recommendations to help guide you. The following explains some
guidance messages you may receive.
166
MEDIA CENTER 730N (RHR)
“Please take a left in 500 feet.” - The red arrow points in
the direction you should turn. The dot indicates a ma- “Follow the road.” - You should continue driving on the
current road for the distance shown.
neuver point.
“Prepare to take a left” or “Keep left in one mile.” - Keep
left does not mean to use HOV lanes or express lanes. You
should note that there is an upcoming turn and prepare
MEDIA CENTER 730N (RHR)
167
to make any lane changes needed to safely make the turn. NOTE: At intersections and traffic circles, only the ends
As always, road safety must be observed when making a of the roads to be passed are displayed.
lane change.
“Take the second exit to the right.” - This means to pass
the first exit after this announcement is given.
“Take the second turn on the right.” - This arrow shows
you which exit you should take from a traffic circle.
“Keep right in half a mile.” - ”Keep right” means that the
street will fork and you should follow the indicated
direction.
168
MEDIA CENTER 730N (RHR)
“You have reached your destination.” - The specified
destination has been reached and route guidance is
terminated. The display will switch back after few
seconds.
Navigation Options
Options Before Activating the Route Guidance
Before confirming the route with the GO soft-key, it is
possible to select options different from the default route
settings.
Touch the OPTIONS soft-key in the Confirm Route
screen to get to the NAV Options screen.
Press View Route Choices to view alternate routing.
MEDIA CENTER 730N (RHR)
Press Simulate Route to simulate the route.
Touch the Destination Info soft-key in the NAV Options
menu to find a map of the destination area, the complete View Turn List to see a list of turns on the route.
address or coordinates of your destination.
169
170
MEDIA CENTER 730N (RHR)
Use the page soft-keys to scroll through the list of turns. Touch the Avoid This Road soft-key to avoid the selected
The turn soft-keys display the length of the route seg- turn in the list. The route will be re-calculated, if an
ment, direction of turn, and the name of the street.
alternate route is possible.
Touch a street in the list either to avoid the street or to Touch the Show This Turn soft-key to display a map of
preview the turn in the map view.
the area surrounding the selected turn.
MEDIA CENTER 730N (RHR)
171
Touch the Find POI Near Destination soft-key to exchange the destination with a POI near to the desired
destination. Read more about POI in the POI section of
this manual.
The turn will be displayed in the center of the map. Touch
the NEXT TURN soft-key to show a map of the area close
to the next turn in the turn list, touch the PREV TURN
soft-key to show a map of the area close to the previous
turn in the turn list.
Press Save Destination to save the destination address.
Touch the Back soft-key to go back to the Turn List menu. Touch the Change Method soft-key in the NAV Options
menu to change the default routing method.
172
MEDIA CENTER 730N (RHR)
Options During Route Guidance
During active route guidance the View Route Choices
and Simulate Route soft-keys are replaced by the Take
Detour and Find Nearby POI soft-keys.
After you touch one of the method soft-keys in this
menu, the CHANGE soft-key will appear for confirmation of the method change.
NOTE: Since toll roads, tunnels and ferries are built for
the purpose of shortening travel distances, avoiding Touch the Take Detour soft-key to access the Detour From
these road types may increase distance and travel time. Route menu.
MEDIA CENTER 730N (RHR)
173
Navigation Default Settings
Touch the NAV Settings soft-key in the Navigation - Main
Menu to select the preferred measurement, set default
routing method, view GPS information, and adjust guidance prompt volume.
Set Measurement Metric/US
Select a distance and touch the GO soft-key to confirm.
The navigation will avoid the roads in the turn list for the
selected distance and calculate an alternate route.
Press the Find Nearby POI soft-key to search for a local
POI.
Press Save Destination soft-key to save the destination
address.
174
MEDIA CENTER 730N (RHR)
From the Navigation Main Menu touch NAV Settings NOTE: Avoiding freeways, toll roads, tunnels or ferries
and then select either mi/ft or km/m.
may result in very long routes.
Set Default Routing Method
GPS Information
Mark or unmark route parameters and then touch the The GPS Information menu displays Current Location,
SAVE soft-key (not shown) to confirm the changes. Press Coordinates in degrees, minutes and seconds (touch the
the NAV hard-key to cancel without change.
DECIMAL soft-key to switch to Decimal degrees), number of used satellites, a map of the calculated position,
and elevation.
MEDIA CENTER 730N (RHR)
Press the NAV hard-key to exit to the NAV - Main Menu.
Guidance Prompts
175
Select and adjust the navigation guidance prompts in this
menu.
Touch the SAMPLE VOL soft-key to listen to the current
volume setting.
Once satisfied with the volume, touch the SAVE soft-key
to save the settings. Touch the CANCEL soft-key to exit
the menu without saving the settings.
Map Viewer
Press the NAV hard-key to switch to the Navigation Main Menu.
176
MEDIA CENTER 730N (RHR)
Press the NAV hard-key again to toggle between Navi- Map Zoom Level
Press the Zoom soft-key to change the zoom level.
gation - Main Menu and navigation MAP.
The tip of the arrow in the circle in the center shows your
vehicle’s position on the map. The square soft-keys on
the left show the map zoom factor, the map orientation,
the display mode, and the current location soft-key.
Touch the slider or the IN and OUT soft-keys to change
the zoom level. Roads with lower functional classification
are not shown in higher zoom levels. (E.g. residential
streets, lightly-traveled county roads.)
MEDIA CENTER 730N (RHR)
177
Suggested routes are displayed as bright green lines on
Map Orientation
Touch the soft-key with the compass arrow to toggle top of the road map when the route guidance is active.
between a map oriented to the North, or oriented parallel
NOTE: Suggested routes (green) have a higher priority
to the vehicle heading.
than recorded trails and may overwrite recorded trail
NOTE: Map orientation to the North is not available in lines.
3D mode.
Stop Over
3D Map Viewer
Touch the soft-key with the 2D/3D symbol to toggle
between 2D or 3D map views.
Minimize Buttons
Touch the Minimize Button on the lower right of the map
to hide/show all the other buttons on the map.
Route Lines
The navigation radio displays recorded trail lines as
yellow lines on top of the road map. (See Record New
Trail section for more details.)
178
MEDIA CENTER 730N (RHR)
When the route guidance is active, press the Add Stop
Over soft-key to add multiple destinations. After you
confirm a stop over, you may either go to the entered stop
over first, or add it to a destination list.
Trip Planner
If you are traveling to multiple destinations, the My Trip
function will allow you to calculate and save the route to
each destination.
Touch the ADD soft-key to confirm the stop over desti- 1. Touch the My Trips soft-key in the NAV - Main Menu.
nation.
NOTE: Once you reach a destination, the system will
automatically guide you to the next destination on the
list.
To review the destination list, touch the OPTIONS softkey in the Route Guidance screen and touch the VIEW
DESTINATIONS soft-key.
To show the destinations information touch the Desired
Destinations soft-key.
Touch the EXIT soft-key to exit the Destination Info 2. Touch the PLAN NEW TRIP soft-key to start a new
menu.
trip.
MEDIA CENTER 730N (RHR)
3. Name the trip and touch the SAVE soft-key.
179
4. Touch ADD DESTINATION.
5. Enter a destination (see section Destination Input in
this manual).
180
MEDIA CENTER 730N (RHR)
In the Confirm Destination screen:
6. Touch the SAVE soft-key to add the destination to the
list.
NOTE: You can add up to eight destinations to a trip.
The display shows the Itinerary is FULL message in the
status line if all eight destinations are used.
7. Touch the EXIT soft-key to access the My Trips menu.
MEDIA CENTER 730N (RHR)
181
8. You may now either PLAN NEW TRIP, DELETE ALL 9. Touch a destination soft-key to get the destination
your trips, or select your trip by touching the soft-key information, or touch the START THIS TRIP soft-key to
with the desired trip name.
start the trip.
NOTE: You may add up to 12 trips to the list. The 10. Touch the GO soft-key to confirm the first destination
display shows the My Trips is FULL message in the status of the trip.
line if all 12 trips are used.
You may touch the EDIT TRIP soft-key to edit the trip.
182
MEDIA CENTER 730N (RHR)
In the Edit Trip menu you may rename, delete, or edit the You may now Change Name or Change Address.
details of this trip. Touch a destination in the list.
Touch the EXIT soft-key to confirm your changes.
From the Edit Trip menu touch the desired destination
Touch the Modify Input Order soft-key in the Edit
you would like to edit.
Address Info menu to rearrange the order of the destinations in the trip.
MEDIA CENTER 730N (RHR)
183
Realtime Traffic by SIRIUS Satellite Radio
The SIRIUS Realtime Traffic feature is a specific application of the radio receiver used for receiving real-time
traffic.
The navigation radio receives traffic messages with the
satellite radio receiver. You must have a subscription
with SIRIUS to receive this service. Refer to the ReSubscribe to SIRIUS Satellite Radio chapter in the Radio
section of this manual.
Touch the yellow up and down arrow soft-keys to move
the entry in the list. Touch the SAVE soft-key when you
are done.
184
MEDIA CENTER 730N (RHR)
SIRIUS Realtime Traffic Flow
• A transparent green line indicates flowing traffic with
Traffic flow information is fed to SIRIUS Traffic by
speeds greater than or equal to 65% of the speed as
roadway sensors monitored and maintained by local
given by the digital map
departments of transportation. The availability of these
• A transparent yellow line indicates an average driving
feeds varies city by city and is limited by road infrastrucspeed 20% and 65% of the speed as given by the digital
ture and maintenance.
map.
• A transparent red line indicates an average driving
speed is less than or equal to 20% of the speed as given
by the digital map.
MEDIA CENTER 730N (RHR)
185
Display Traffic Messages
1. Press the MENU hard-key on the right side of the
radio.
The traffic message screen displays traffic messages in a
list form. Data related to traffic flows, incidents and
construction are gathered from traffic monitoring systems, emergency services, motorists’ calls, etc., and are
2. Touch the SIRIUS Traffic soft-key to display the avail- processed at a central traffic information center. The
able traffic messages.
186
MEDIA CENTER 730N (RHR)
information is transferred to the Realtime Traffic Infor- Touch Map to see the location of a message on a map.
mation service provider, who then generates the Realtime Touch PREVIOUS or NEXT to step through the list of
Traffic messages that are sent by SIRIUS to the vehicle. available messages.
3. Touch one of the soft-keys with a message to view
details.
Touch the back soft-key in the upper left corner of the
screen to exit the Traffic Message Detail screen.
Switching SIRIUS Realtime Traffic On or Off
1. Press the MENU hard-key on the right side of the
radio.
2. Touch the SIRIUS Traffic soft-key.
3. Touch Setup to access the SIRIUS Traffic Setup menu.
MEDIA CENTER 730N (RHR)
187
Speed and Flow
Touch the Speed and Flow soft-key to enable/disable
Speed and Flow traffic information. Once you change
settings, touch the SAVE soft-key to confirm your
changes.
View All Messages
You can view either all received messages for the area
you have a subscription, or only the messages on your
route within the same area.
Dynamic Route Guidance
Ongoing route guidance will change your route based
upon the traffic information received. The AUTO mode
will make these changes automatically; the MANUAL
mode will ask for each traffic event.
4. The Realtime Traffic icon in the upper right
corner of the screen indicates that the Realtime
Traffic receiver is on. The green icon indicates an
active subscription, the yellow icon indicates an expired
Realtime Traffic Legend
subscription. Refer to the Re-Subscribe to SIRIUS Satellite
The navigation radio can display icons on the map when
Radio chapter in the Radio section of this manual.
the SIRIUS Traffic function is active.
188
MEDIA CENTER 730N (RHR)
NOTE: It can take between 15 and 30 minutes for a Address Book
message to reach the system.
Overview
The address book provides a way to organize and store
frequently used addresses.
Touch the LEGEND soft-key in the SIRIUS Traffic Setup
menu to review possible icons and their meaning.
The address book is organized in folders.
MEDIA CENTER 730N (RHR)
189
• The HOME folder contains only your home address. • The Voice Command Created Entries folder contains
Touch this folder soft-key to edit your home address.
contacts which were created with the help of the Voice
You may route to this address by touching the Guide
Command System. Touch the Voice Command CreMe Home soft-key in the NAV - Main Menu.
ated Entries folder soft-key to add, edit, delete, and
route to your contacts.
• The In-Motion Folder contains links to entries in the
other folders. The In-Motion Folder is the only folder • The GOOG-411 folder lets you connect to the Google
accessible while the vehicle is in motion. This is a
Voice Local Search telephone service, that provides a
safety feature that limits the availability of certain
speech recognition-based business directory search
navigation tasks while the vehicle is traveling. Touch
and places a call to the resulting number in the US or
the In-Motion Folder soft-key and add links to existing
Canada. http://www.google.com/goog411/
entries in the Default Folder, Voice Command Created
Entries folder, or any of the personalized folders.
• The Default Folder contains contacts which are available whenever the vehicle is not in motion. Touch the
Default Folder soft-key to add, edit, delete, and route
to your contacts.
190
MEDIA CENTER 730N (RHR)
2. Touch My Files for the Manage My Files screen.
Add a Folder
Touch the +Folder soft-key to add a personalized folder.
After the new folder is named, the folder will be available
in the address book.
Entering/Editing/Deleting an Address
1. Touch Menu to access one of the menus.
3. Touch My Address Book soft-key to get to the Address
Book menu.
MEDIA CENTER 730N (RHR)
The Address Book screen appears.
4. To select an address from the Default folder, touch the
Default Folder soft-key.
191
To select an address from another folder, touch one of the
folder soft-keys.
5. Touch the ADD soft-key to add a new contact. Touch
CLEAR ALL to delete all contacts in this folder, touch
EXIT to go back to the Address Book menu, or touch a
soft-key with a contact name to view, edit, or change the
Contact Information.
192
MEDIA CENTER 730N (RHR)
You may now create a new contact or copy a contact from
another folder.
6. Touch Create New Contact to go to the next screen.
7. Enter a name for your new contact.
8. Press the SAVE soft-key to display the Contact Information menu.
MEDIA CENTER 730N (RHR)
193
You may now edit the contact information. Add a voice In this example, we need to add an address to the contact.
tag for the voice recognition or touch the Edit Contact
9. Press Add Address and enter a destination (refer to
soft-key to add more information to the entry.
Destination Input section in this manual).
Touch the DELETE soft-key to delete the contact.
194
MEDIA CENTER 730N (RHR)
10. Once the destination is entered, touch the SAVE
In addition, you may enter a phone number by pressing
soft-key to confirm the address.
the Add Phone # soft-key.
11. Touch the EXIT soft-key after all available information has been entered.
MEDIA CENTER 730N (RHR)
195
Search a Contact in the Address Book
1. Touch the SEARCH soft-key in the Address Book
menu.
4. Touch the B. Jeffries soft-key from the results list to
select the contact.
2. Enter a contact name.
3. Touch either LIST or CONTINUE.
196
MEDIA CENTER 730N (RHR)
Route To soft-key to start route guidance to the contacts
address, or touch Call Contact if a valid phone was
entered and a telephone is connected to the navigation
radio.
5. Once the contact information is displayed, touch the
MEDIA CENTER 730N (RHR)
197
SYSTEM INFORMATION
Press the MENU hard-key on the right side of the radio
and touch the System Setup soft-key to access the System
Setup menu.
User Data Backup
Contact your local authorized dealer for information on
how to backup or transfer your user data, such as address
book entries, music files, etc., before returning or changing to a vehicle with a compatible navigation radio (e.g.,
Touch the System Information soft-key to access the
end of lease).
system information.
Database Updates
Contact your local authorized dealer for information on
available database updates.
Updates are available for the navigation radio software,
the Gracenote威 music recognition technology database,
and the navigation database.
Please read the specific instructions on the update discs
before installing the updates.
Contact your local authorized dealer if you need help or
more information about the available updates.
198
MEDIA CENTER 730N (RHR)
TROUBLESHOOTING
HDD
Q.: When the radio is playing songs from the HDD, it
jumps to the first song in the list. Why does it do that?
Radio
Q.: I cannot find my favorite radio station that I was
always able to receive before. What can I do?
A.: After the radio is done copying or ripping music to
the HDD, it needs to rebuild the current playlist. After the
A.: Select MUSIC TYPE while in radio mode. Select
playlist was rebuilt, the radio starts to play the first song
CLEAR to disable all PTY filters, and try to SEEK for your
in the current playlist.
station.
iPod/Digital Device Control
Disc
Q.: I cannot copy the iTunes library songs from my iPod
Q.: The radio does not display the information for the
to the HDD.
disc I inserted. How do I access this information?
A.: That is correct. iPod does not allow iTunes library
A.: The radio will search the internal Gracenote威 music
songs to be copied off the iPod.
recognition technology database on the hard drive for the
inserted disc. If the database is out of date or the database Q.: Can I use an iPod to copy songs to the HDD?
does not contain the particular disc, the information
A.: Yes. Copy to WMA or MP3 files to the USB storage
cannot be displayed. Contact an authorized dealer or
partition on your iPod. Connect the iPod to the USB
website www.chrysler.com, www.jeep.com, www.dodgeconnector on the radio and copy the files to the HDD.
.com or www.ramtrucks.com for available updates.
MEDIA CENTER 730N (RHR)
NOTE: MP4 and M4V files are not supported.
Q.: My iPod does not play audio on the radio.
A.: Make sure the iPod is connected via the iPod
connector.
199
A.: If the navigation radio has trouble recognizing your
voice, you should press the MENU hard-key, press
System Setup, and then press the Voice Command softkey to access the Voice Command menu. Touch the Start
Voice Training soft-key and follow the spoken
instructions.
Navigation
Q.: I entered the wrong home address. How can I change Uconnect™ Phone
Q.: My phone does not pair to the radio. How do I know
it?
if my phone is compatible?
A.: Go to My Files, then Address Book. In the Address
Book, press the HOME soft-key. Press Edit Contact to edit A.: Refer to the compatibility device list located on the
the entry. Refer to the Getting Started section for more following brand websites: www.chrysler.com, www.jeep.com, www.dodge.com or www.ramtrucks.com.
details.
Voice Command
Q.: The voice command does not understand what I say.
What can I do to make this work?
200
MEDIA CENTER 730N (RHR)
GLOSSARY OF TERMS
AS
CD
CDC
CDDB
DVD
DVDC
FIX
GMD
Autostore
Compact Disc
Compact Disc Changer
A technology company
founded in 1995 as
CDDB, Inc. The company
has been renamed to
Gracenote, Inc. The technology has been renamed
to the Gracenote media
recognition service.
Digital Versatile Disc
Digital Versatile Disc
Changer
A position determined
from terrestrial, electronic,
or astronomical data.
GPS
GMT
HDD
HFM
MFB
MFS
MP3 MPEG-1 Audio
Layer-3.
Gracenote Media Database, Gracenote Media
Recognition Service (www.gracenote.com)
Global Positioning System
Greenwich Mean Time
Hard-Disk Drive
Hands-Free Module
Multifunction soft-key
Multi Functional Steering
Wheel
Compression scheme used
to transfer audio files via
the Internet and store in
portable players and digital audio servers.
MEDIA CENTER 730N (RHR)
M4A
M4P
NAV
POS
PTY
The.M4A format is actually the audio layer of
(non-video) MPEG 4
movies.
The.M4P format is an audio file purchased from
Apple’s Music Store
(iTunes) and is protected
by a Digital Rights Management scheme.
Navigation
Position
Program type (radio)
RBDS
SAT
SAT-V
SDS
TMC
VES™
WMA
201
Radio Broadcast Data System
Satellite Radio
Satellite Backseat TV™
Speech Dialog System
Traffic Message Channel
Video Entertainment System
Windows Media Audio
Format
USER’S MANUAL
MEDIA CENTER 730N (RHR)
Chrysler Group LLC
12RHR-526-AA
First Edition
Printed in U.S.A.