WMC126W
Please read this user manual first!
Dear Customer,
We hope that you get the best results from the product which has been manufactured in
state-of-the-art plants and passed through a strict quality control procedure.
Therefore, please read the entire user manual carefully before using the product and keep
it as a reference for future use. In case of transferring the product to someone else, give
the manual as well.
The user manual will help you use your machine in a fast
and safe way.
between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful hints about usage.
Warning for hazardous situations with regard to life and property.
Warning for electric shock.
This appliance’s packaging material is recyclable. Help recycle it and protect
the environment by dropping it off in the municipal facility provided
for this purpose. Your appliance also contains a great amount of recyclable
material. It is marked with this label to indicate the used appliances that should
not be mixed with other waste. This way, the appliance recycling organised
by your manufacturer will be done under the best possible conditions, in
compliance with European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment. Contact your town hall or your retailer for the used
appliance collection points closest to your home. We thank you doing your
part to protect the environment.
2
EN
TABLE OF CONTENTS
1 Your washing machine
4
Overview . . . . . . . . . . . . . . . . . . . . . . . . Technical specifications . . . . . . . . . . . . . 2 Important safety
instructions
6
General safety . . . . . . . . . . . . . . . . . . . . Intended use . . . . . . . . . . . . . . . . . . . . . Children's safety . . . . . . . . . . . . . . . . . . 3 Installation
8
"QQSPQSJBUFJOTUBMMBUJPOMPDBUJPO . . . . . . . 8
3FNPWJOHQBDLBHJOHSFJOGPSDFNFOU. . . . 8
3FNPWJOHUIFUSBOTQPSUBUJPOMPDLT. . . . . 8
Connecting water supply . . . . . . . . . . . . Connecting to the drain . . . . . . . . . . . . "EKVTUJOHUIFGFFU. . . . . . . . . . . . . . . . . Electrical connection . . . . . . . . . . . . . . First use . . . . . . . . . . . . . . . . . . . . . . . Disposing of packaging material . . . . . Transportation of the product. . . . . . . . Disposing of the old product . . . . . . . . 4 Preparation
6 Maintenance and cleaning28
Cleaning the detergent drawer. . . . . . . 28
Cleaning the loading door and the
drum . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cleaning the body and control panel . . 28
Cleaning the water intake filters . . . . . . 28
Draining remaining water and cleaning the
pump filter . . . . . . . . . . . . . . . . . . . . . . 7 Troubleshooting
31
8 Guarantee
37
9 Service
38
13
Things to be done for energy saving . . Sorting the laundry . . . . . . . . . . . . . . . Preparing laundry for washing . . . . . . . Correct load capacity . . . . . . . . . . . . . Loading the laundry . . . . . . . . . . . . . . . Using detergent and softener . . . . . . . Tips for efficient washing . . . . . . . . . . . 5 Operating the product
"EEJUJPOBMQSPHSBNNFT. . . . . . . . . . . . Special programmes . . . . . . . . . . . . . . Temperature selection . . . . . . . . . . . . . Spin speed selection . . . . . . . . . . . . . . Programme and consumption table. . . 22
"VYJMJBSZGVODUJPOTFMFDUJPO . . . . . . . . . . Starting the programme. . . . . . . . . . . . Child Lock . . . . . . . . . . . . . . . . . . . . . . Progress of programme. . . . . . . . . . . . Loading door lock . . . . . . . . . . . . . . . . Changing the selections after programme
has started . . . . . . . . . . . . . . . . . . . . . Cancelling the programme. . . . . . . . . . 19
Control panel. . . . . . . . . . . . . . . . . . . . Preparing the machine. . . . . . . . . . . . . Programme selection. . . . . . . . . . . . . . Main programmes . . . . . . . . . . . . . . . 3
EN
1
Your washing machine
Overview
8
1
2
3
7
6
4
5
1PXFSDBCMF
2- Top panel
3- Control panel
'JMUFSDBQ
"EKVTUBCMFGFFU
-PBEJOHEPPS
7- Detergent drawer
8- Drain hose
EN
WMC126W
2
Important safety instructions
This section contains safety instructions
that will help protect from risk of personal
remove the filter while there is still
water in the drum. Otherwise, risk of
follow these instructions shall void any
warranty.
occur.
General safety
door. The loading door will be ready
This product can be used by children
at and above 8 years old and by persons
whose physical, sensory or mental
capabilities were not fully developed or
who lack experience and knowledge
provided that they are supervised or
trained on the safe usage of the product
and the risks it brings out. Children must
not play with the product. Cleaning and
maintenance works should not be
performed by children unless they
are supervised by someone.
Never place the product on a carpetcovered floor; otherwise, lack of
airflow beneath the machine will
cause electrical parts to overheat.
This will cause problems with your
product.
washing cycle comes to an end.
In case of forcing the loading door
to open, the door and the lock
mechanism may get damaged.
or pouring water onto it! There is the
risk of electric shock!
Never unplug by pulling on the cable,
always pull out by gripping the plug.
supplements suitable for washing
machines only.
tags and on the detergent package.
during installation, maintenance,
cleaning and repairing procedures.
the Authorised Service Agent.
repairing procedures carried out
by authorised persons
Manufacturer shall not be held
liable for damages that may arise
from procedures carried out by
unauthorised persons.
not be operated unless it is repaired
by the Authorised Service Agent.
There is the risk of electric shock!
operating in the event of powering
on after a power interruption. If you
wish to cancel the programme, see
"Cancelling the programme" section.
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Do not neglect
to have the grounding installation
made by a qualified electrician. Our
company shall not be liable for any
damages that will arise when the
product is used without grounding in
accordance with the local regulations.
must be securely fastened and remain
undamaged. Otherwise, there is the
risk of water leakage.
Intended use
domestic use. It is not suitable for
commercial use such use may
invalidate the warranty
washing and rinsing of laundry that
are marked accordingly.
responsibility arisen from incorrect
usage or transportation.
Children's safety
the product when it is in use. Do not
EN
let them to tamper with the product.
Use child lock to prevent children
from intervening with the product.
t %POPUGPSHFUUPDMPTFUIFMPBEJOH
door when leaving the room where
the product is located.
t 4UPSFBMMEFUFSHFOUTBOEBEEJUJWFTJOB
safe place away from the reach of the
children.
7
EN
3
Installation
To make the product ready for use,
review the information in the user manual
and make sure that the electricity, tap water
supply and water drainage systems are
appropriate before installation. If they are
not ,call a qualified technician and
plumber to have any necessary
arrangements carried out.
Preparation of the location and
electrical, tap water and waste water
installations at the place of installation
is the customer's responsibility.
Installation and electrical connections
of the product must be carried out
by a competent person.
Manufacturer shall not be held liable
for damages that may arise from
procedures carried out by unauthorised
persons.
Prior to installation, visually check if
the product has any defects on it. If
so, do not have it installed. Damaged
products cause risks for your safety.
Make sure that the water inlet and
discharge hoses as well as the power
cable are not folded, pinched or
crushed while pushing the product into
its place after installation or cleaning
procedures.
Removing packaging
reinforcement
After removing transportation locks
(see below) tilt the machine backwards
and remove the packaging reinforcement
attached to the ribbon.
Removing the
transportation locks
bolts before operating the washing
machine, otherwise, the product will
be damaged.
until they rotate freely (C).
Appropriate installation location
Do not place it on a long pile rug or
similar surfaces.
and the dryer -with full load- when
they are placed on top of each other
Place the product on a solid and flat
floor that has sufficient load carrying
capacity!
turning them gently.
power cable.
where temperature may fall below
from the edges of other furniture.
8
EN
the User Manual bag into the holes on
the rear panel. (P)
2. Tighten all hose nuts by hand. Never
use a wrench when tightening the
nuts.
in a safe place to reuse when the
washing machine needs to be moved
again in the future.
Never move the product without the
transportation safety bolts properly
fixed in place!
Connecting water supply
The water supply pressure required
from the fully open tap in one minute
to have your machine run smoothly.
water pressure is higher.
Models with a single water inlet
should not be connected to the hot
water tap. In such a case the laundry
will get damaged or the product will
switch to protection mode and will not
operate.
Do not use old or used water inlet
hoses on the new product. It may
cause stains on your laundry.
Connect the special hose supplied
with the product to the water inlets
on the product.
3. Open the taps completely after
making the hose connection to check
for water leaks at the connection
points. If any leaks occur, turn off the
the nut carefully after checking the
seal. To prevent water leakages and
damages caused by them, keep the
taps closed when the machine is not
in use.
EN
Connecting to the drain
t 5IFFOEPGUIFESBJOIPTFNVTUCF
directly connected to the wastewater
drain or to the washbasin.
:PVSIPVTFXJMMCFGMPPEFEJGUIF
hose comes out of its housing
during water discharge. Moreover,
there is risk of scalding due to high
washing temperatures! To prevent
such situations and to ensure smooth
water intake and discharge of the
machine, fix the end of the discharge
hose tightly so that it cannot come
out.
t 5IFIPTFTIPVMECFBUUBDIFEUPB
IFJHIUPGBUMFBTUDNBOEDN
at most.
t *ODBTFUIFIPTFJTFMFWBUFEBGUFS
laying it on the floor level or close
UPUIFHSPVOEMFTTUIBODN
above the ground), water discharge
becomes more difficult and the
laundry may come out excessively
wet. Therefore, follow the heights
described in the figure.
A
t 5PQSFWFOUGMPXJOHPGEJSUZXBUFSCBDL
into the machine and to allow for easy
discharge, do not immerse the hose
end into the dirty water or drive it in
UIFESBJONPSFUIBODN*GJUJTUPP
long, cut it short.
t 5IFFOEPGUIFIPTFTIPVMEOPUCF
bent, it should not be stepped on
and the hose must not be pinched
between the drain and the machine.
t *GUIFMFOHUIPGUIFIPTFJTUPPTIPSU
use it by adding an original extension
hose. Length of the hose may not be
longer than 3.2 m. To avoid water leak
failures, the connection between the
extension hose and the drain hose of
the product must be fitted well with
an appropriate clamp as not to come
off and leak.
Adjusting the feet
order to ensure that the product
A Inoperates
more silent and vibrationfree, it must stand level and balanced
on its feet. Balance the machine by
BEKVTUJOHUIFGFFU0UIFSXJTFUIF
product may move from its place
and cause crushing and vibration
problems.
-PPTFOUIFMPDLOVUTPOUIFGFFUCZ
hand.
"EKVTUUIFGFFUVOUJMUIFQSPEVDU
stands level and balanced.
3. Tighten all lock nuts again by hand.
not use any tools to loosen the
A Do
lock nuts. Otherwise, they will get
damaged.
Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the "Technical specifications"
table. Our company shall not be liable
EN
for any damages that will arise when the
product is used without grounding in
accordance with the local regulations.
regulations.
reach after installation.
breaker protection are specified in
the “Technical specifications” section.
If the current value of the fuse or
fuse cover has been fitted. Colour of the
replacement fuse cover must be the same
colour as that visible on the pin face of the
plug. Fuse covers are available from any
good electrical store.
Important
Fitting a different plug
lead of this appliance may not correspond
with the coloured markings identifying
the terminals on your plug, proceed as
follows:
to your mains voltage.
extension cables or multi-plugs.
2
Damaged power cables must be
replaced by the Authorised Service
Agents.
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
Should the mains lead of the appliance
become damaged or need replacing at
any time, it must be replaced by a special
purpose made mains lead which can only
3
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol f or
coloured green and yellow or green.
Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
be fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified
electrician.
This appliance must be earthed
If the fitted moulded plug is not suitable
for your socket, then the plug should be
cut off and an appropriate plug fitted.
Destroy the old plug, which is cut off as
a plug with a bared cord could cause a
shock hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this appliance
used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the
plug must not be used until a replacement
EN
First use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections "Important safety instructions"
and "Installation".
To prepare the product for washing
laundry, first perform a Drum
Cleaning programme. If your machine
is not featured with Drum Cleaning
connections.
3. Drain the remaining water in the
product completely; see, "Draining
remaining water and cleaning the
pump filter".
in the reverse order of removal
transportation locks".
Never move the product without the
transportation safety bolts properly
fixed in place!
auxiliary functions as well. Before starting
anti-limescale powder into the main wash
detergent compartment (compartment nr.
II). If the anti-limescale is in tablet form,
put only one tablet into compartment nr.
II. Dry the inside of the bellow with a clean
piece of cloth after the programme has
come to an end.
Disposing of the old product
Dispose of the old product in an
environmentally friendly manner.
collection centre in your area to learn how
to dispose of your product.
For children's safety, cut the power
cable and break the locking mechanism
of the loading door so that it will be
nonfunctional before disposing of the
product.
Use an anti-limescale suitable for the
washing machines.
Some water might have remained in
the product due to the quality control
processes in the production. It is not
harmful for the product.
Disposing of packaging material
Packaging materials are dangerous to
a safe place away from reach of the
children.
Packaging materials of the product are
manufactured from recyclable materials.
Dispose of them properly and sort
in accordance with recycled waste
instructions. Do not dispose of them with
normal domestic waste.
Transportation of the product
transporting it.
EN
4
Preparation
Things to be done for
energy saving
Following information will help you use
the product in an ecological and energyefficient manner.
t 0QFSBUFUIFQSPEVDUJOUIFIJHIFTU
capacity allowed by the programme
you have selected, but do not
overload; see, “Programme and
consumption table”.
t "MXBZTGPMMPXUIFJOTUSVDUJPOTPOUIF
detergent packaging.
t 8BTITMJHIUMZTPJMFEMBVOESZBUMPX
temperatures.
t 6TFGBTUFSQSPHSBNNFTGPSTNBMM
quantities of lightly soiled laundry.
t %POPUVTFQSFXBTIBOEIJHI
temperatures for laundry that is not
heavily soiled or stained.
t *GZPVQMBOUPESZZPVSMBVOESZJOB
dryer, select the highest spin speed
recommended during washing
process.
t %POPUVTFEFUFSHFOUJOFYDFTTPG
the amount recommended on the
detergent package.
Sorting the laundry
t 4PSUMBVOESZBDDPSEJOHUPUZQFPG
fabric, colour, and degree of soiling
and allowable water temperature.
t "MXBZTPCFZUIFJOTUSVDUJPOTHJWFOPO
the garment tags.
Washing water
temperature
Wash with sensitive,
.short programmes
Bleach can be
used
Do not use bleach
Suitable for drier
Do not dry with drier
Hang without
spinning
Can be ironed with
hot iron
Non machine-washable
Do not wash
Dry-cleanable
Do not dry-clean
Dry horizontally
Dry on a hanger
Can be ironed
with warm iron
Do not iron
Preparing laundry for washing
t -BVOESZJUFNTXJUINFUBMBUUBDINFOUT
such as, underwired bras, belt
buckles or metal buttons will damage
UIFNBDIJOF3FNPWFUIFNFUBM
pieces or wash the clothes by putting
them in a laundry bag or pillow case.
EN
and the washing programme desired.
Take out all items in the pockets
such as coins, pens and paper clips,
and turn pockets inside out and brush.
or cause noise problem.
socks and nylon stockings in a laundry
bag or pillow case.
items.
mend rips and tears.
washable” labelled products only with
an appropriate programme.
together. New, dark coloured cottons
release a lot of dye. Wash them
separately.
amount of water according to the weight of
the loaded laundry.
Follow the information in the
“Programme and consumption table”.
When overloaded, machine’s washing
performance will drop. Moreover, noise
and vibration problems may occur.
Laundry types and their average weights in
the following table are given as examples.
Laundry type
Bathrobe
Napkin
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
Hand towel
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Weight (g)
200
200
200
600
200
Blouses
Loading the laundry
before washing. If unsure, check with a
dry cleaner.
machine.
and limescale removers suitable for
hear a locking sound. Ensure that no
items are caught in the door.
The loading door is locked while a
programme is running. The door
can only be opened a while after the
programme comes to an end.
In case of misplacing the laundry, noise
and vibration problems may occur in
the machine.
instructions on the package.
turned inside out.
wool in the freezer for a few hours
before washing. This will reduce pilling.
such as flour, lime dust, milk powder,
etc. intensely must be shaken off
before placing into the machine. Such
dusts and powders on the laundry
may build up on the inner parts of
the machine in time and can cause
damage.
Correct load capacity
The maximum load capacity depends on
the type of laundry, the degree of soiling
EN
Using detergent and softener
Detergent Drawer
The detergent drawer is composed of three
compartments:
- (I) for pre-wash
- (II) for main wash
- (III) for softener
for softener, in addition there is a siphon
in softener compartment
II
III
I
special detergents (liquid detergent,
wool shampoo, etc.) used solely for
delicate clothes.
and quilts, it is recommended to use
liquid detergent.
Wash woollens with special detergent
made specifically for woollens.
Use only detergents manufactured
specifically for washing machines.
Do not use soap powder.
Adjusting detergent amount
The amount of washing detergent to be
used depends on the amount of laundry,
the degree of soiling and water hardness.
on the detergent package carefully and
follow the dosage values.
dosage quantities recommended
on the detergent package to avoid
problems of excessive foam, poor
rinsing, financial savings and finally,
environmental protection.
Detergent, softener and other
cleaning agents
starting the washing programme.
while the washing programme is
running!
prewash, do not put any detergent
into the prewash compartment
(compartment nr. I).
amounts or lightly soiled clothes.
recommended dosage.
Using softeners
Pour the softener into the softener
compartment of the detergent drawer.
the package.
put liquid detergent into the prewash
compartment (compartment nr. I).
marking in the softener compartment.
prewash if you are using a detergent
bag or dispensing ball. Place the
detergent bag or the dispensing ball
directly among the laundry in the
machine.
not forget to place the liquid detergent
cup into the main wash compartment
(compartment nr. II).
Choosing the detergent type
The type of detergent to be used
depends on the type and colour of the
fabric.
it with water before putting it in the
detergent drawer.
Using liquid detergents
If the product contains a liquid
detergent cup:
liquid detergent cup in compartment
nr. “II”.
measuring cup and follow the
instructions on the package.
the package.
and white laundry.
fluidity, dilute it with water before
EN
putting in the detergent cup.
detergents may leave residues
C Tablet
in the detergent compartment. If you
encounter such a case, place the
tablet detergent between the laundry,
close to the lower part of the drum in
future washings.
Use the tablet or gel detergent
without selecting the prewash
function.
Using starch
t "EEMJRVJETUBSDIQPXEFSTUBSDI
or the dyestuff into the softener
compartment as instructed on the
package.
t %POPUVTFTPGUFOFSBOETUBSDI
together in a washing cycle.
t 8JQFUIFJOTJEFPGUIFNBDIJOFXJUI
a damp and clean cloth after using
starch.
Using bleaches
t 4FMFDUBQSPHSBNNFXJUIQSFXBTI
and add the bleaching agent at
the beginning of the prewash. Do
not put detergent in the prewash
DPNQBSUNFOU"TBOBMUFSOBUJWF
application, select a programme
with extra rinse and add the
bleaching agent while the machine
is taking water from the detergent
compartment during first rinsing step.
t %POPUVTFCMFBDIJOHBHFOUBOE
detergent by mixing them.
t 6TFKVTUBMJUUMFBNPVOUBQQSPY
ml) of bleaching agent and rinse the
clothes very well as it causes skin
irritation. Do not pour the bleaching
agent onto the clothes and do not use
it for coloured clothes.
t 8IFOVTJOHPYZHFOCBTFECMFBDIFT
follow the instructions on the package
and select a programme that washes
at a lower temperature.
C
If the product does not contain a
liquid detergent cup:
t %POPUVTFMJRVJEEFUFSHFOUGPS
the prewash in a programme with
prewash.
t 6TFUIFEFUFSHFOUNBOVGBDUVSFST
measuring cup and follow the
instructions on the package.
t -JRVJEEFUFSHFOUTUBJOTZPVSDMPUIFT
when used with Delayed Start
function. If you are going to use the
Delayed Start function, do not use
liquid detergent.
Using gel and tablet detergent
When using tablet, gel, etc. detergents,
read the manufacturer’s instructions on
the detergent package carefully and
follow the dosage values. If there is not
any instruction on the package, apply the
following.
t *GUIFHFMEFUFSHFOUUIJDLOFTTJTGMVJEBM
and your machine does not contain
a special liquid detergent cup, put
the gel detergent into the main wash
detergent compartment during
first water intake. If your machine
contains a liquid detergent cup, fill the
detergent into this cup before starting
the programme.
t *GUIFHFMEFUFSHFOUUIJDLOFTTJTOPU
fluidal or in the shape of capsule liquid
tablet, put it directly into the drum
before washing.
t 1VUUBCMFUEFUFSHFOUTJOUPUIFNBJO
wash compartment (compartment
nr. II) or directly into the drum before
washing.
EN
t 0YZHFOCBTFECMFBDIFTDBOCFVTFE
together with detergents; however,
if its thickness is not the same with
the detergent, put the detergent first
into the compartment nr. “II” in the
detergent drawer and wait until the
detergent flows while the machine
JTUBLJOHJOXBUFS"EEUIFCMFBDIJOH
agent from the same compartment
while the machine is still taking in
water.
Using limescale remover
t 8IFOSFRVJSFEVTFMJNFTDBMF
removers manufactured specifically
for washing machines only.
t "MXBZTGPMMPXJOTUSVDUJPOTPOUIF
package.
EN
Tips for efficient washing
Clothes
Light colours and
whites
Heavily Soiled
Soiling Level
(difficult stains
such as grass,
coffee, fruits
and blood.)
(No visible
stains exist.)
Delicates/
Dark colours Woollens/Silks
(Recommended
temperature range
based on soiling
level: 40-90C)
(Recommended
temperature range
based on soiling level:
cold-40C)
(Recommended
temperature
range based
on soiling level:
cold-40C)
(Recommended
temperature
range based
on soiling level:
cold-30C)
It may be
necessary to pretreat the stains of
perform prewash.
Powder and
liquid detergents
recommended
for whites can be
used at dosages
recommended
for heavily soiled
clothes. It is
recommended
to use powder
detergents to clean
clay and soil stains
and the stains that
are sensitive to
bleaches.
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
heavily soiled clothes.
It is recommended
to use powder
detergents to clean
clay and soil stains
and the stains that are
sensitive to bleaches.
Use detergents
without bleach.
Liquid
detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for heavily soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woollen and silk
clothes must
be washed with
special woollen
detergents.
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
normally soiled
clothes. Use
detergents without
bleach.
Liquid
detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for normally
soiled clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woollen and silk
clothes must
be washed with
special woollen
detergents.
Powder and
liquid detergents
recommended for
colours can be
used at dosages
recommended for
lightly soiled clothes.
Use detergents
without bleach.
Liquid
detergents
suitable for
colours and dark
colours can be
used at dosages
recommended
for lightly soiled
clothes.
Prefer liquid
detergents
produced for
delicate clothes.
Woollen and silk
clothes must
be washed with
special woollen
detergents.
Normally Soiled Powder and
liquid detergents
recommended
(For example,
for whites can be
stains caused
used at dosages
by body on
recommended for
collars and
normally soiled
cuffs)
clothes.
Lightly Soiled
Colours
Powder and
liquid detergents
recommended
for whites can be
used at dosages
recommended for
lightly soiled clothes.
EN
5
Operating the product
Control panel
1
2
3
4
5
6
7
2 - Programme Follow-up indicator
Preparing the machine
Make sure that the hoses are connected
tightly. Plug in your machine. Turn the
tap on completely. Place the laundry in
softener.
Programme selection
the type, quantity and soiling degree
of the laundry in accordance with the
"Programme and consumption table"
and the temperature table below.
Cold
Heavily soiled white cottons
and linens. (coffee table covers,
tableclothes, towels, bed
sheets, etc.)
Normally soiled, coloured,
fade proof cottons or synthetic
clothes (shirt, nightgown,
pyjamas,etc.) and lightly soiled
white linens (underwear, etc.)
Blended laundry including
delicate textile (nets curtains,
etc.), synthetics and woollens.
2. Select the desired programme with
the Programme Selection button.
Programmes are limited with the
highest spin speed appropriate for
EN
that particular type of fabric.
When selecting a programme, always
consider the type of fabric, colour,
degree of soiling and permissible
water temperature.
temperature. Higher temperature
means higher power consumption.
For further programme details, see
"Programme and consumption table".
Main programmes
Depending on the type of fabric, use the
following main programmes.
Use this programme for your cotton
laundry (such as bed sheets, duvet and
pillowcase sets, towels, bathrobes,
washed with vigorous washing action for
a longer washing cycle.
Use this programme to wash your
synthetic clothes (shirts, blouses,
with a gentle action and has a shorter
washing cycle compared to the Cottons
programme.
For curtains and tulle, use the Synthetic
their meshed texture causes excessive
foaming, wash the nets/tulle by putting
little amount of detergent into the main
wash compartment. Do not put detergent
in the prewash compartment.
Use this programme to wash your
woollen clothes. Select the appropriate
temperature complying with the tags of
your clothes. Use appropriate detergents
for woollens.
Additional programmes
For special cases, additional programmes
are available in the machine.
according to the model of the
machine.
durable cotton and linen laundry in this
programme with the highest energy and
water saving compared to all other wash
water temperature may differ from the
declared cycle temperature. Programme
duration may automatically be shortened
during later stages of the programme if
you wash less amount (e.g. ½ capacity
or less) of laundry. In this case energy
and water consumption will be further
decreased giving you the opportunity for
a more economical wash. This feature
is available for certain models having
remaining time display.
Use this programme for baby clothes and
clothes worn by allergic people. Increased
hygiene is provided by a longer heating
period and an additional rinse cycle.
• Delicate
Use this programme to wash your delicate
clothes.It washes with a gentle action without
any interim spin compared to the Synthetics
programme.
• Hand Wash 20°C
Use this programme to wash your
machine- washable” tags and for which
hand wash is recommended. It washes
laundry with a very gentle washing action
to not to damage clothes.
Use this programme to quickly wash your
lightly soiled cotton clothes.
Use this programme to wash your
dark coloured laundry, or the coloured
laundry that you do not want them
get faded. Washing is performed with
less mechanical movements at low
temperature. It is recommended to use
liquid detergent or wool shampoo for dark
coloured laundry.
Use this programme to wash your cotton
and synthetic clothes together without
sorting them.
EN
• Xpress Super Short
Use this programme to wash your little
amount of lightly soiled cotton clothes
in a short time.
• Shirts
Use this programme to wash the shirts
made of cotton,synthetic and synthetic
blended fabrics together.
Special programmes
For specific applications, select any of the
following programmes.
Use this programme when you want to
rinse or starch separately.
Use this programme to apply an
additional spin cycle for your laundry or to
drain the water in the machine.
Before selecting this programme, select
Pause button. First, the machine will drain
the water inside of it. Then, it will spin the
laundry with the set spin speed and drain
the water coming out of them.
If you wish to drain only the water
without spinning your laundry, select the
Spin+Drain programme and then select
the No Spin function with the help of Spin
Pause button.
Use a lower spin speed for delicate
laundries.
Whenever a new programme is selected,
the recommended spin speed of the
selected programme is displayed on the
spin speed indicator.
To decrease the spin speed, press
Spin speed decreases gradually.
Then, depending on the model of the
options appear on the display. See
explanations of these options.
If the programme has not reached the
spinning step, you can change the
speed without switching the machine
to Pause mode.
EN
20
20
cancelling.
** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and
‘60°C cotton standard cycle’ and indicated with the
symbols on the panel.
The auxiliary functions in the table may vary according to the model of your machine.
Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient
temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
23
EN
Auxiliary function selection
Use the following auxiliary functions
according to your daily needs. Select
the desired auxiliary functions before
starting the programme. Furthermore,
you may also select or cancel auxiliary
functions that are suitable to the running
programme without pressing the Start
operating. For this, the machine must be
in a step before the auxiliary function you
are going to select or cancel.
If the auxiliary function cannot be selected
or cancelled, light of the relevant auxiliary
function will blink 3 times to warn the user.
Some functions cannot be selected
together. For example, Prewash and
Quick Wash.
If a second auxiliary function
conflicting with the first one is
selected before starting the machine,
the function selected first will be
cancelled and the second auxiliary
function selection will remain active.
For example, if you want to select
Quick Wash after you have selected
the Prewash, Prewash will be
cancelled and Quick Wash will remain
active.
compatible with the programme
cannot be selected. (See "Programme
and consumption table")
vary according to the model of the
machine.
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
Prewash without detergent is
recommended for tulle and curtains.
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of
rinsing steps for lightly soiled laundry.
When you select this function,
load your machine with half of the
maximum laundry specified in the
programme table.
If you are not going to unload your
clothes immediately after the programme
completes, you may use rinse hold
function to keep your laundry in the final
rinsing water in order to prevent them
from getting wrinkled when there is no
button after this process if you want to
drain the water without spinning your
laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in
The programme resumes. Water
is drained, laundry is spun and the
programme is completed.
Delayed Start (In some models only)
With the Delayed Start function the
startup of the programme may be delayed
Do not use liquid detergents when
you set Delayed Start! There is the
risk of staining of the clothes.
Open the loading door, place the
laundry and put detergent, etc. Select
the washing programme, temperature,
spin speed and, if required, the auxiliary
functions. Set the desired time by
pressing the Delayed Start button. When
the button is pressed once, 3 hours
delayed start is selected. When the same
is selected, and when it is pressed for
selected. If you press the Delayed Start
button once again, Delayed Start function
will be cancelled. Press Start/Pause
button. Previous delayed start time light
turns off and next delayed start time light
the countdown, all delayed start lights will
turn off and the selected programme will
start.
during the delayed start period.
EN
Changing the Delayed Start period
Press Delayed Start button. Every time
the button is pressed, the period will
change in 3-hour increments and the light
of the selected delayed start time will turn
on.
Cancelling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
Set the Delayed Start period to zero (all
delayed start period lights will turn off)
or turn the Programme Selection knob
to any programme. Thus, Delayed Start
function will be cancelled. The End/Cancel
light flashes continuously. Then, select
the programme you want to run again.
To activate the Child Lock:
st
and 2nd
Function buttons for 3 seconds. The
st
and 2nd
buttons will flash while you keep the
buttons pressed for 3 seconds.
To deactivate the Child Lock:
st
and 2nd auxiliary
function buttons for 3 seconds while any
programme is running. The lights on the
st
and 2nd
flash while you keep the buttons pressed
for 3 seconds.
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On
is running, and select another
programme.
When the power is restored after a
power failure or after your machine
is unplugged and plugged in again,
the Child Lock will not be deactivated
when the machine resumes operating.
programme.
Starting the programme
programme. Programme follow-up light
showing the startup of the programme will
turn on.
Child Lock
Use child lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
If the Programme Selection knob is
rotated when the child lock is active,
st
and 2nd auxiliary
function buttons will blink 3 times. The
child lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
Even if another programme is
selected with the Programme
Selection knob while the Child
Lock is active, previously selected
programme will continue running.
When the Child Lock is active and
the machine is running, you can
switch the machine to Pause mode
without deactivating the Child Lock
by turning the Programme Selection
you turn the Programme Selection
knob afterwards, the programme will
resume.
EN
Progress of programme
Progress of a running programme
can be followed from the Programme
of every programme step, the relevant
indicator light will turn on and light of the
completed step will turn off.
speed and temperature settings without
stopping the programme flow while the
programme is running. To do this, the
change you are going to make must be in
a step after the running programme step.
If the change is not compatible, relevant
lights will flash for 3 times.
If the machine does not pass to the
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
in the machine.
Loading door lock
There is a locking system on the loading
door of the machine that prevents
opening of the door in cases when the
water level is unsuitable.
Loading door light will start flashing when
the machine is switched to Pause mode.
Machine checks the level of the water
inside. If the level is suitable, Loading
minutes and the loading door can be
opened.
If the level is unsuitable, Loading Door
light turns off and the loading door cannot
be opened. If you are obliged to open
the Loading Door while the Loading
Door light is off, you have to cancel the
current programme; see "Cancelling the
programme".
Changing the selections after
programme has started
Switching the machine to pause
mode
the machine to pause mode while a
programme is running. The light of the
step which the machine is in starts
flashing in the Programme Follow-up
indicator to show that the machine has
been switched to the pause mode.
be opened, Loading Door light will also
illuminate continuously in addition to the
programme step light.
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme
has reached, you may cancel or activate
function selection".
temperature settings; see, "Spin speed
selection" and "Temperature selection".
If no change is allowed, the relevant
light will flash for 3 times.
Adding or taking out laundry
the machine to pause mode. The
programme follow-up light of the
relevant step during which the
machine was switched into the pause
mode will flash.
Wait until the Loading Door can be
opened. Open the Loading Door and add
or take out the laundry. Close the Loading
Door. Make changes in auxiliary functions,
temperature and speed settings if
start the machine.
Cancelling the programme
To cancel the programme, turn the
Programme Selection knob to select
another programme. Previous programme
will be cancelled. End / Cancel light
will flash continuously to notify that the
programme has been cancelled.
when you turn the Programme Selection
knob; however, it does not drain the
water inside. When you select and start
a new programme, the newly selected
EN
programme will start depending on
the step the previous programme was
cancelled in. For example, it may take in
additional water or continue to wash with
the water inside.
Depending on the step where the
programme was cancelled in, you may
have to put detergent and softener
again for the programme you have
selected a new.
Your machine is equipped with
a “Standby Mode”
In case of not starting any programme or
waiting without making any other operation
when the machine is turned on by On/Off
button and while it is in selection step or if
no other operation is performed approximately
2 minutes after the programme you selected
has come to an end,your machine will
automatically switch to energy saving mode.
Display brightness will decrease. In case of
rotating the Programme Selection knob or
pressing any button, lights will restore to their
previous condition. This is not a fault.
27
EN
6
Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if
cleaned at regular intervals.
Cleaning the detergent drawer
Clean the detergent drawer at regular
(compartment nr. II). If the anti-limescale
is in tablet form, put only one tablet into
compartment nr. II. Dry the inside of the
bellow with a clean piece of cloth after the
programme has come to an end.
every 2 months.
Use an anti-limescale suitable for the
washing machines.
as shown below in order to prevent
accumulation of powder detergent in
time.
foreign substance is left in the drum.
in the softener compartment and pull
towards you until the compartment is
removed from the machine.
If more than normal amount of water
and softener mixture starts to gather
in the softener compartment, the
siphon must be cleaned.
2. Wash the detergent drawer and the
siphon with plenty of lukewarm water
in a washbasin. Wear protective
gloves or use an appropriate brush to
avoid touching of the residues in the
drawer with your skin when cleaning.
3. Insert the drawer back into its place
after cleaning and make sure that it is
seated well.
Cleaning the loading
door and the drum
dirt may accumulate in your machine in
time and may cause unpleasant odours
and washing complaints. To avoid this,
use the Drum Cleaning programme. If
your machine is not featured with Drum
If the holes on the bellow shown in the
figure is blocked, open the holes using a
toothpick.
Foreign metal substances in your
machine will cause rust stains. Clean
the stains on the drum surface by
using cleaning agents for stainless
steel. Never use steel wool or wire
wool.
Cleaning the body
and control panel
Wipe the body of the machine with
soapy water or non-corrosive mild gel
detergents as necessary, and dry with a
soft cloth.
Use only a soft and damp cloth to clean
the control panel.
Never use sponge or scrub materials.
These will damage the painted and
plastic surfaces.
Cleaning the water intake filters
Before starting the programme, put
max. 100 g of anti-limescale powder into
the main wash detergent compartment
28
There is a filter at the end of each water
intake valve at the rear of the machine
and also at the end of each water
intake hose where they are connected
to the tap. These filters prevent foreign
substances and dirt in the water to enter
the washing machine. Filters should be
EN
cleaned as they do get dirty.
of the water inside the
A Temperature
NBDIJOFNBZSJTFVQUP$5P
avoid burning risk, filter must be
cleaned after the water in the machine
cools down.
2. Open the filter cap.
If the filter cap is composed of two
pieces, press the tab on the filter cap
downwards and pull the piece out
towards yourself.
$MPTFUIFUBQT
3FNPWFUIFOVUTPGUIFXBUFSJOUBLF
hoses to access the filters on the
water intake valves. Clean them with
an appropriate brush. If the filters are
too dirty, take them out by means of
pliers and clean them.
3. Take out the filters on the flat ends of
the water intake hoses together with
the gaskets and clean thoroughly
under running water.
3FQMBDFUIFHBTLFUTBOEGJMUFST
carefully in their places and tighten the
hose nuts by hand.
If the filter cap is one piece, pull the cap
from both sides at the top to open.
Draining remaining water and
cleaning the pump filter
The filter system in your machine prevents
solid items such as buttons, coins and
fabric fibers clogging the pump impeller
during discharge of washing water. Thus,
the water will be discharged without any
problem and the service life of the pump
will extend.
If the machine fails to drain water, the
pump filter is clogged. Filter must be
cleaned whenever it is clogged or in every
3 months. Water must be drained off first
to clean the pump filter.
In addition, prior to transporting the
machine (eg., when moving to another
house) and in case of freezing of the
water, water may have to be drained
completely.
Foreign substances left in the pump
filter may damage your machine or
may cause noise problem.
In order to clean the dirty filter and
discharge the water:
6OQMVHUIFNBDIJOFUPDVUPGGUIF
supply power.
C:PVDBOSFNPWFUIFGJMUFSDPWFSCZ
slightly pushing downwards with a
thin plastic tipped tool, through the
gap above the filter cover. Do not
use metal tipped tools to remove the
cover.
3. Some of our products have
emergency draining hose and some
does not have. Follow the steps
below to discharge the water.
Discharging the water when the product
has an emergency draining hose:
A
EN
a. Pull the emergency draining hose out
from its seat
b. Place a large container at the end
of the hose. Drain the water into
the container by pulling out the plug
at the end of the hose. When the
container is full, block the inlet of
UIFIPTFCZSFQMBDJOHUIFQMVH"GUFS
the container is emptied, repeat the
above procedure to drain the water in
the machine completely.
c. When draining of water is finished,
close the end by the plug again and
fix the hose in its place.
d. Turn the pump filter to take it out.
Discharging the water when the product
does not have an emergency draining
hose:
while installing it into its housing. Seat
the filter into its place completely.
Otherwise, water may leak from the
filter cap.
*GUIFGJMUFSDBQJTDPNQPTFEPGUXP
pieces, close the filter cap by pressing
on the tab. If it is one piece, seat the
tabs in the lower part into their places
first, and then press the upper part to
close.
a. Place a large container in front of the
filter to catch water from the filter.
b. Loosen pump filter (anticlockwise)
until water starts to flow. Fill the
flowing water into the container
you have placed in front of the filter.
"MXBZTLFFQBQJFDFPGDMPUIIBOEZUP
absorb any spilled water.
c. When the water inside the machine is
finished, take out the filter completely
by turning it.
$MFBOBOZSFTJEVFTJOTJEFUIFGJMUFSBT
well as fibers, if any, around the pump
impeller region.
*OTUBMMUIFGJMUFS
*GZPVSQSPEVDUIBTBXBUFSKFUGFBUVSF
be sure to fit the filter into its housing
in the pump. Never force the filter
A
EN
7
Troubleshooting
Programme cannot be started or selected.
Press and hold Start / Pause / Cancel
button for 3 seconds to reset the machine to factory settings. (See "Cancelling the
programme")
Water in the machine.
This is not a failure; water is not harmful to the
machine.
There is water leaking from the bottom of the washing machine.
Be sure the seals of the water
inlet hoses are securely fitted. Attach the hose to the tap tightly.
Make sure that the pump filter is
completely closed.
Machine does not fill with water.
Open the inlet water taps fully.
Flatten the water inlet hose.
Clean the water inlet filter.
Close the Loading Door.
Machine does not drain water.
Clean or flatten the hose.
Clean the pump filter.
Machine vibrates or makes noise.
Adjust the feet to level the machine.
Clean the pump
filter.
Remove the transportation
safety bolts.
Add more laundry to the
machine.
Take out some of the laundry
from the machine or distribute the load by hand to balance it homogenously in the
machine.
Make sure that the machine is not
leaning on anything.
Machine stopped shortly after the programme started.
It will resume
running when the voltage restores to the normal level.
Machine directly discharges the water it takes in.
Connect the water draining
hose as described in the operation manual.
No water can be seen in the machine during washing.
The water level is not visible from outside of the washing machine. This is not a
failure.
EN
Loading door cannot be opened.
t %PPSMPDLJTBDUJWBUFECFDBVTFPGUIFXBUFSMFWFMJOUIFNBDIJOFDrain the
water by running the Pump or Spin programme.
t .BDIJOFJTIFBUJOHVQUIFXBUFSPSJUJTBUUIFTQJOOJOHDZDMFWait until the
programme completes.
t $IJMEMPDLJTFOHBHFE%PPSMPDLXJMMCFEFBDUJWBUFEBDPVQMFPGNJOVUFTBGUFS
UIFQSPHSBNNFIBTDPNFUPBOFOEWait for a couple of minutes for
deactivation of the door lock.
Washing takes longer time than the one specified in the manual.
t 8BUFSQSFTTVSFJTMPXMachine waits until taking in adequate amount of
water to prevent poor washing quality due to the decreased amount of water.
Therefore, the washing time extends.
t 7PMUBHFNJHIUCFMPXWashing time is prolonged to avoid poor washing
results when the supply voltage is low.
t *OQVUUFNQFSBUVSFPGXBUFSNJHIUCFMPXRequired time to heat up the water
extends in cold seasons. Also, washing time can be lengthened to avoid poor
washing results.
t /VNCFSPGSJOTFTBOEPSBNPVOUPGSJOTFXBUFSNJHIUIBWFJODSFBTFE
Machine increases the amount of rinse water when good rinsing is needed and
adds an extra rinsing step if necessary.
t &YDFTTJWFGPBNNJHIUIBWFPDDVSSFEBOEBVUPNBUJDGPBNBCTPSQUJPOTZTUFN
NJHIUIBWFCFFOBDUJWBUFEEVFUPUPPNVDIEFUFSHFOUVTBHFUse
recommended amount of detergent.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
Programme time does not countdown. (On models with display)
t 5JNFSNBZTUPQEVSJOHXBUFSJOUBLFTimer indicator will not countdown until
the machine takes in adequate amount of water. The machine will wait until there
is sufficient amount of water to avoid poor washing results due to lack of water.
Timer indicator will resume countdown after this.
t 5JNFSNBZTUPQEVSJOHIFBUJOHTUFQTimer indicator will not countdown until
the machine reaches the selected temperature.
t 5JNFSNBZTUPQEVSJOHTQJOOJOHTUFQAutomatic unbalanced load detection
system might be activated due to the unbalanced distribution of the laundry in the
drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
Programme time does not countdown.
t 5IFSFNJHIUCFBOJNCBMBODFPGMBVOESZJOUIFNBDIJOFAutomatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
C
C
C
32
EN
Machine does not switch to spinning step.
Automatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
Check the filter
and the draining hose.
Use
recommended amount of detergent.
Washing performance is poor: Laundry turns grey.
Use
the recommended amount of detergent appropriate for water hardness and the
laundry.
Select the proper temperature for the laundry to be washed.
Using insufficient
amount of detergent with hard water causes the soil to stick on the cloth and this
turns the cloth into grey in time. It is difficult to eliminate greying once it happens.
Use the recommended amount of detergent appropriate for water hardness and
the laundry.
Use the recommended amount of detergent
appropriate for water hardness and the laundry.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Stains persist or the laundry is not whitened.
Use recommended amount of
detergent appropriate for the laundry.
Do not load the machine in excess. Load
with amounts recommended in the "Programme and consumption table".
Select the proper
programme and temperature for the laundry to be washed.
Use original detergent appropriate for the
machine.
Put the detergent in the correct
compartment. Do not mix the bleaching agent and the detergent with each other.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Oily stains appeared on the laundry.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Clothes smell unpleasantly.
Leave the
detergent drawer as well as the loading door of the machine ajar after each
washing. Thus, a humid environment favorable for bacteria cannot occur in the
machine.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
33
EN
Colour of the clothes faded.
t &YDFTTJWFMBVOESZXBTMPBEFEJODo not load the machine in excess.
t %FUFSHFOUJOVTFJTEBNQKeep detergents closed in an environment free of
humidity and do not expose them to excessive temperatures.
t "IJHIFSUFNQFSBUVSFJTTFMFDUFESelect the proper programme and
temperature according to the type and soiling degree of the laundry.
t 3FHVMBSESVNDMFBOJOHJTOPUBQQMJFEClean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
It does not rinse well.
t 5IFBNPVOUCSBOEBOETUPSBHFDPOEJUJPOTPGUIFEFUFSHFOUVTFEBSF
JOBQQSPQSJBUFUse a detergent appropriate for the washing machine and
your laundry. Keep detergents closed in an environment free of humidity and do
not expose them to excessive temperatures.
t %FUFSHFOUJTQVUJOUIFXSPOHDPNQBSUNFOUIf detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Put the detergent in the correct
compartment.
t 1VNQGJMUFSJTDMPHHFECheck the filter.
t %SBJOIPTFJTGPMEFECheck the drain hose.
Laundry became stiff after washing.
t *OTVGGJDJFOUBNPVOUPGEFUFSHFOUJTVTFEUsing insufficient amount of
detergent for the water hardness can cause the laundry to become stiff in time.
Use appropriate amount of detergent according to the water hardness.
t %FUFSHFOUJTQVUJOUIFXSPOHDPNQBSUNFOUIf detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Put the detergent in the correct
compartment.
t %FUFSHFOUNJHIUCFNJYFEXJUIUIFTPGUFOFSDo not mix the softener with
detergent. Wash and clean the dispenser with hot water.
t 3FHVMBSESVNDMFBOJOHJTOPUBQQMJFEClean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Laundry does not smell like the softener.
t %FUFSHFOUJTQVUJOUIFXSPOHDPNQBSUNFOUIf detergent is put in the
prewash compartment although prewash cycle is not selected, machine can take
this detergent during rinsing or softener step. Wash and clean the dispenser with
hot water. Put the detergent in the correct compartment.
t %FUFSHFOUNJHIUCFNJYFEXJUIUIFTPGUFOFSDo not mix the softener with
detergent. Wash and clean the dispenser with hot water.
t 3FHVMBSESVNDMFBOJOHJTOPUBQQMJFEClean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
EN
Detergent residue in the detergent drawer.
Dry the detergent drawer before putting in
detergent.
Keep detergents closed in an environment free
of humidity and do not expose them to excessive temperatures.
Check the water pressure.
Check the holes
and clean if they are clogged.
Call the Authorised
Service Agent.
Do not mix the softener with
detergent. Wash and clean the dispenser with hot water.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
There is detergent left on the laundry.
Do not load the machine in excess.
Select the proper
programme and temperature for the laundry to be washed.
Select the proper detergent for the laundry to be
washed.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Too much foam forms in the machine.
Use
detergents appropriate for the washing machine.
Use only sufficient amount of
detergent.
Store detergent in a closed
and dry location. Do not store in excessively hot places.
Use smaller amounts of detergent for this type of item.
Put the detergent in the correct
compartment.
There may be problem in the valves or in the
detergent dispenser. Call the Authorised Service Agent.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
EN
Foam is overflowing from the detergent drawer.
Mix 1 tablespoonful softener and ½ l water and
pour into the main wash compartment of the detergent drawer.
Put detergent into the machine suitable for the programmes and maximum loads
indicated in the “Programme and consumption table”. When you use additional
chemicals (stain removers, bleaches and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme
Use recommended
amount of detergent.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
If you cannot eliminate the problem although you follow the instructions in this
nonfunctional product yourself.
EN
8
Guarantee
Booklet provided.
against the cost of breakdown repairs
for twelve months from the date of the
original purchase.
is recommended for all Washing
Machines, Dishwashers and Electric
Cookers
What is covered?
a Gas Safe (or BORD GAIS) registered
Gas Installer.
materials, defective components or
manufacturing defect.
parts, but excluding consumable
items.
new products and is not transferable if
the product is resold.
repairer to carry out the repair.
What is not covered?
incidental or consequential damages.
or misuse and abuse.
diminish your statutory or legal rights.
including knobs, flaps, handles or
container lids.
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
Should you experience any difficulty in
obtaining service please contact the Beko
Customer Help-Line.
e-mail:service@beko.co.uk
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
commercial or non-residential
household premises.
often included within your household
contents insurance policy, or may be
available separately from your retailer).
Important notes.
built for domestic household use only.
product is installed or used in
commercial or non-residential
domestic household premises.
installed, located and operated in
accordance with the instructions
contained in the User Instructions
37
EN
9
Service
Please keep your purchase receipt or
other proof of purchase in a safe place;
you will need to have it should the product
require attention under guarantee.
:PVTIPVMEBMTPDPNQMFUFUIFEFUBJMT
below; it will help us assist you when
requesting service. (The model number
is printed on the Instruction Booklet and
UIFTFSJBMOVNCFSJTQSJOUFEPOUIF3BUJOH
Label affixed to the appliance)
service can be obtained at a charge.
Should you experience any difficulty in
obtaining service please contact the Beko
Customer Help-Line.
5FM
e-mail:service@beko.co.uk
Model No:
Serial No:
3FUBJMFS
Date of purchase:
For service under guarantee simply
telephone the appropriate number below
UK Mainland & Northern Ireland
'SJEHFT'SFF[FST
&MFDUSJD$PPLFST
(BT
Dual Fuel Cookers
8BTIJOH.BDIJOFT
Dishwashers
Republic of Ireland
"MM3FGSJHFSBUJPO
"MM$PPLFST
Washing Machines & Dishwashers
Before requesting service please
check the trouble-shooting guide in the
Operating Instructions as a charge may be
levied where no fault is found even though
your product may still be under guarantee.
Service once the manufacturers
guarantee has expired.
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
agreement document. Otherwise please
call the appropriate number above where
38
EN
PRODUCT FICHE
Complying Commission Delegated Regulation (EU) No 1061/201
Supplier name or trademark
Beko
WMC126W
Model name
Rated capacity (kg)
6
Energy efficiency class (1)
A+
Annual Energy Consumption (kWh) (2)
194
Energy consumption of the standard 60°C cotton programme at full load (kWh)
1.014
Energy consumption of the standard 60°C cotton programme at partial load (kWh)
0.820
Energy consumption of the standard 40°C cotton programme at partial load (kWh)
0.640
Power consumption in ‘off-mode’ (W)
0.250
Power consumption in ‘left-on mode’ (W)
1.00
Annual Water Consumption (l) (3)
8800
B
Spin-drying efficiency class (4)
Maximum spin speed (rpm)
1200
Remaining moisture Content (%)
53
Cotton Eco 60°C and 40°C
Standard cotton programme (5)
Programme time of the standard 60°C cotton programme at full load (min)
160
Programme time of the standard 60°C cotton programme at partial load (min)
130
Programme time of the standard 40°C cotton programme at partial load (min)
130
Duration of the left-on mode (min)
N/A
Airborne acoustical noise emissions washing/spinning (dB)
59/75
Built-in
(1)
No
Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)
Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and
the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2)
Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual
water consumption will depend on how the appliance is used.
(3)
Scale from A (Highest Efficiency) to G (Lowest Efficiency)
(4)
“Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which
the information in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that
they are the most efficient programmes in terms of combined energy and water consumption.
(5)
EN
BEKO plc. Beko House, 1 Greenhill Crescent,
Watford Herts WD18 8QU