User`s Manual - Appliances Online

User’s Manual
TFTV6085M
61cm (24”) FHD LED TV / DVD Combo with DVB-T
HIGH-DEFINITION MULTIMEDIA INTERFACE
COMPONENT
Input
USB
2.0
Connection
VIEW ALL FREE
Digital Broadcasts
7 DAY EPG
WXGA
PARENTAL
Lock
electronic program guide
PC input
LED TV
Liquid Crystal Display
75mm
75mm
DTV via USB
TELETEXT
Slim Design
SUPER
RECORD
H.264
MPEG-4/AVC
*Where available
Offering Australians quality since 1958
www.palsonic.com.au
Important safety information
WARNING
CAUTION
This symbol is intended to tell the user
that parts inside the product pose a
risk of electric shock to persons.
RISK OF ELECTRIC
SHOCK; DO NOT OPEN
CAUTION:
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to tell the user
that important operating and servicing
instructions are described here.
Grounding information
This apparatus must be grounded. To ensure safe operation, the grounded plug must be
inserted only into a standard grounded power outlet which is effectively grounded through
normal household wiring. Extension cords used with the equipment must be hazardous
.The face that the equipment operates satisfactorily only means it is grounded, but the
installation may not necessarily be safe. For your safety, if in any doubt about the effective
grounding if the equipment or power outlet, please consult a qualified technician.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. TO AVOID ELECTRIC SHOCK, INSERT
TPLUG FULLY INTO THE POWER OUTLET.
Product disposal
Do not dispose of the TV with general household waste. The LED screen contains a small
amount of liquid crystal and mercury. For disposal or recycling information, please contact
your local authorities.
Safety precautions
Please read all of these instructions before you operate your television and save these
instructions for later use. This unit has been engineered and manufactured to ensure your
personal safety, However, improper use can result in electric shock or fire hazards. In order
not to defeat the safeguards incorporated in this equipment, please observe the following
basic rules for its installation, use and servicing.
•
•
•
•
•
•
•
•
•
Unplug this television equipment from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a soft cloth moistened with water for cleaning.
Use only the attachments recommended by the television equipment manufacturer.
Do not use this television equipment near water-for example, near a bath tub, washbowl, kitchen sink
or laundry tub, in a wet basement, or near a swimming pool.
Do not place this equipment on an unstable surface, stand, or cart. The television equipment may fall,
causing serious injury to a child or an adult, and seriously damage the equipment.
When carrying the TV, hold it under the maim unit. Do not carry the TV by its speakers, Both the base
and the speakers could come off, causing you to drop the TV, possibly resulting in damage to the TV
or causing injury.
Television equipment and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces when moving may cause the equipment and cart combination to overturn.
Shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved
by the manufacturer.
Slots and opening in the cabinet and the back or bottom are provided for ventilation. To ensure
reliable operation of the television equipment and to protect it from overheating, these opening must
not be blocked or covered. This television equipment should not be placed in an enclosed installation such as a bookcase unless proper ventilation os provided.
I
•
The openings should never be covered with a cloth or other material, and the bottom openings
should not be blocked by placing near or over a radiator or heat source.
• This Television equipment should be operated only from type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your
television dealer or local power company.
• As a safety feature ,this television equipment is equipped with a grounded power plug, If the plug
does not fit in your power outlet, contact your electrician. Do not modify the plug and defeat this
safety feature.
• Do not allow anything to rest on the power cord. Do not locate this television equipment where the
cord may be damaged due to lightning and power-line surges.
• Follow all warnings and instructions marked on the television equipment.
• If an outdoor antenna is connected to the television equipment, be sure the antenna system is
grounded so as to provide some protection against voltage surges and static charges.
• For added protection or this television equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to the equipment due to lightning and power-line surges.
• An outdoor antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing
an outdoor antenna system, extreme care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
• The mains plug or the appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable. The mains plug is connected with the electrical outlet with safety
ground wire.
• Do not over load wall outlets and extension cords as this can result in fire or electric shock.
• Never push objects of any kind into this television equipment through cabinet slots as they may
touch dangerous voltage points or short-circuit internal parts. This could result in a fire or electric
shock. Never spill liquid of any kind in the television equipment.
• Do not attempt to service this television equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
• Unplug this television equipment from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
— When the power cord or plug is damaged or frayed.
— If liquid has been spilled into the television equipment.
— If the television equipment does not operate normally by following the operating instructions.
Adjust only those control that are covered by the operating instruction as improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the television equipment to normal operation.
— If the television equipment has been dropped or the cabinet has been damaged.
— When the television equipment exhibits a distinct change in performance
—this indicates a need for service.
• UP on completion of any service or repairs to this television equipment ,ask the service technician
to perform routine safety checks to determine that the television is in safe operating condition.
• When replacement parts are required, make sure that the service technician has used
replacement parts specified by the manufacturer that have the same characteristics as the
original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
• Note to CATV system installer: This note is to remind the CATV system installers that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable
entry practical.
II
CAUTION:
IF the set is not going to be used for a long period, such as during a
vacation, unplug the set from the wall outlet to economise power.
(If the TV set is plugged in, a slight current still flows, even with the
power button in OFF position)
Handling the LED screen
•
•
•
•
•
Do not leave the LED screen facing the sun as it can damage it. Take care when you
place the TV by a window.
Do not push or scratch the LED screen .Do not place a heavy object on the LED
screen. This may cause the screen to lose conformity or cause LED panel
malfunctions.
If the TV is used in a cold place, a smear may appear on the screen. This is not a
malfunction. The screen will return to normal as its temperature rises to a normal
operating level.
If a still picture is displayed for a long time on the TV screen, ghosting may occur for a
while. The ghosting will eventually disappear.
If the LED panel becomes warm during operation, this is normal and not a malfunction.
Handing of broken glass and liquid crystal leakage
If the LED panel is damaged, crystalline liquid leakage may occur, or scattered broken
glass may result. Do not touch broken glass or crystalline liquid (which is toxic). With bare
hands that have cuts, skin irritation or poisoning may result. If any crystalline liquid gets
into mouth or eyes, rinse thoroughly with and consult your doctor.
IMPORTANT NOTICE
This product composes up to 6.0 million cells and a few cell defects may
occur In the manufacture of the panel. Several dead pixels (allow up to 2
bright or 2 dark pixels) on the panel are deemed acceptable by the industry
standards. In line with manufacturers and would not mean that the
panel is faulty. Dead pixels panels with 6 pixels or more within 12 month
period, Palsonic Corporation Pty Ltd. complies with industry standard
and reserves the right to repair the unit and non-refundable. We hope you
will understand that the product that corresponds to this standard is
regarded as acceptable.
III
Table of Content
Overview of the LED TV.................. 1
Features..............................................1
Opening the packing.............................1
Product components............................. 2
Side View............................................. 2
Back View..............................................3
Remote control......................................4
Using the OSD menus.......................6
Channel Adjustment...............................6
Picture Adjustment..................................8
Sound Adjustment..................................9
Time Adjustment....................................10
Lock Adjustment....................................11
Setup Adjustment..................................12
Media Operation.................................. 13
Record...................................................14
DVD Function................................... 15
Information Functions............................15
DVD Player Functions.......................... 15
General Setup Adjustment.................... 16
Audio Setup Adjustment....................... 17
Preference Setup Adjustment............... 18
19
Troubleshooting.................................20
IV
Overview of the LED TV
Congratulation on purchasing the LED Television. This product has been designed
to provide you with a rich audio and video experience. This monitor enables you
to watch broadcast, cable television or channels, connect VCR, VCD or DVD player to watch your favorite movies, or connect a computer to use the display as a
monitor. The TV is equipped with convenient control buttons and a handy remote
control to let you adjust the TV setting and customize the TV preferences through
an easy-to-use on screen menu system.
Features
Enjoy the versatility of your LED TV with its wide variety of features:
TFT LED TV with remote control
[
J'\]^_'`^`{`
Video support:
—HDMI input
—PC input
—PC !
—YPbPr input
—V input
—RF input
"#
!$%!&
#$'+
!@;+@
The following section describes the various components of the LED TV. Please
+?
Z
?;;
control panel
before using it.
/;
+;<= TV+;>
;
?@J
LED Color Television
|
%?;>&
[
Warranty Registration Card
Qui+tart Guide
dapter
If any of these items appears to be missing or damaged, please contact your vendor or authorised
service personnel for assistance.
1
Product components
Side view
DVD ROOM
1
2
3
4
5
OPEN
PLAY
6
7
Remote Inductor and Power Indicator
OPEN
To open the disc tray.
PLAY
Press to play disc.
INPUT
Switch the input sources .
MENU
Press the button to enter on screen Display (OSD).
CH
Increase or decrease channel numbers.
6 VOL
Increase or decrease the volume.
7 POWER
Turn the TV on or off.
2
Back view
8
DC 12V
Connect to 12V Poewer supply.
HEADPHONE
Connect a stereo headphone (3.5mm) for private listening.
PC IN
Connect to the VGA output of your device.
Connect to the audio output of your PC (earphone jack)
AV IN
Connect to the audio and video output of A/V device.
SPDIF
Connect an optional coaxial digital cable (not included) through
a compatible amp/receiver to enjoy superior audio sound.
HDMI IN
Connect to the HDMI output of your device.
USB
Connect to portable USB device such as USB } ash / hard device.
8 RF IN
Connect to the UHF antenna or coaxial cable from local TV.
9 YPbPr
Connect to the component output of your component device.
3
9
8
Remote Control
21
1
3
22
23
2
4
5
24
6
7
25
8
26
9
10
11
27
12
28
13
29
14
15
17
30
16
31
18
32
19
20
• If direct sunlight shine directly on the remote sensor, remote control’s operation may be unstable,
and the effective range will be shorter.
• Do not hit or violently shake the remote control.
• Never expose the remote control to high temperature or humidity.
• If the remote is not used for an extended period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
4
BUTTON
1.
2.
3.
4.
POWER
TEXT
CANCEL
NUMBER
KEYS
5. FAV
10+
6. MUTE
7. VOL +/8. EPG
D.SETUP
9. TV/R
OPEN
10.MENU
11.INFO
12. OK
13. CH.LIST
REP
14. COLOUR
KEYS
FUNCTIONS
Turn the TV on or off.
Start the text mode.
Videotext hidden button.
Press number keys to enter channel numbers.
Press to display a list of favorite.
Only use in DVD mode.
Disable the audio output.
Press +/- button to control the volume up or down.
Press to display electronic program guide menu.
DVD set up menu.
Select the TV/RADIO mode.
EJECT button
Enter or exit the OSD menu.
Display a variety of information about current channel.
Make sure the adjustment setted previously.
Display the channel list.
Repetition button.
Different input source has different functions.
TITLE
D.MENU
TITLE button.
ANGLE
GOTO
Angle button.
Search button.
15. NICAM
16. AUDIO
17.
HOLD
18.
19.
SIZE
20.
SUBPAGE
21.SOURCE
22.REVEAL
23.ASPECT
24.RECALL
25.CH +/26.REC
27.SLEEP
28.
29.EXIT
30.SUB
DVD menu button.
Press repeatedly to cycle through the NICAM mode.
Select an audio source for the current programme.
Press to scan in reverse.
Hold freeze the current teletext page on the screen.
Press to stop the current program.
Press to scan in forword.
You can change the picture size in the teletext mode.
To play the previous chapter, title or track.
Display the submenu of the text.
Select the input source.
Display or remove the content that is hidden.
Switch the screen ratio: auto, 4:3, 14:9, zoom1, zoom2.
Switch to the previously viewed channel.
Press +/- button to switch the channels.
Press to start recording.
Press the button repeatly to set the time to turn off the TV.
Direction button.
Exit the current menu.
Start the subtitle mode.
Press the button to stop the current program.
31.
32.
To play the next chapter, title or track.
INDEX
Display a list and information about the teletext pages.
5
Using the OSD MENU
The On-Screen Display (OSD) menu system provides a quick and
simple method to adjust LED TV base setting. OSD menu can be
viewed using both the remote control and the control buttons on the
front panel.
Channel Adjustment
1. Press MENU button on the front panel or MENU button on the remote
control to display the main menu.
2. Press ▲/▼ buttons on the remote control or CH +/- buttons on the front
panel to select the Channel Setting menu, then press OK or ▼ buttons for
the submenu.
3. Press ▲/▼ buttons on the remote control or CH +/- buttons on the front
panel to select the item you want to adjust.
4. Press OK button on the remote control and press ▲/ ▼◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
After changes settings of the OSD menus, the new settings are confirmed automatically
when OSD picture vanish, even did not press the menu to exit the OSD system.
6
Channel Adjustment
Sub windows info:
There are following functions in this page:
Channel Management: To manage (Delete/Rename/Swap/Lock/Skip) all channels;
Favorite Management: To manage (Add/Delete) Favorite channels;
Country: To select country.
Auto Search: To select auto search mode (All/Digital/Analogue);
Digital Manual Search: To search digital channel by entering parameters manually;
Analogue Manual Search: To search analogue channel by entering parameters
manually.
Channel management
Channel Edit:
Press ▲/▼ button to select the channel you want to edit.
Press the red button on the remote control to lock the channel;
Press the green button on the remote control to delete the channel;
Press the yellow button on the remote control to skip the channel;
Press the blue button on the remote control to swap the channel;
Favorite Management
Press the fav button on the remote control to select the programs to be added into favorite
list and press “RED”,“GREEN”,”YELLOW” or ”BLUE” key to mark them .
7
Channel Adjustment
County
Austradia
Portugal
Sweden
Finland
Czech Repbulic
DTV
ATV
OK
Press ▲/▼ button to select the county that you want.
Auto Search
DTV
ATV
OK
All Mode: Select “All” item to scan all digital channels carried by current signal
mode firstly and then switch to scan all analog channels in selected
country automatically. User can skip digital search to analog search
directly by entering “EXIT” or “MENU” key and can also stop auto
scan directly by entering “EXIT” or “MENU” during analog scanning.
Digital Mode: Select “Digital” item to search all digital channels in selected country
carried by current signal mode. User can stop search directly by
entering “EXIT” or “MENU” key.
Analog Mode: Select “Analogue” item to search all digital channels in selected
country carried by current signal mode. User can stop search
directly by entering “EXIT” or “MENU” key.
All search mode processing interface display as following:
8
Channel Adjustment
DTV Manual Search
OK
Select channel number by “RIGHT” key or entering number directly. The strength
and the quality as shows . Press “ENTER” key on “Start” item to start current
channel search. The manual searching UI and the auto searching UI are the same.
ATV Manual Search
OK
ATV Manual Search
Analog Parameters
Current Channel
Frequency
Search
Fine Tune
Color System
Sound System
Value
Default
001-100
001
Show the Frequency when srech
Frequency of the
current channel
Press the button “ enter ” to open the
search sub page.
Press the button “ enter ” to open the
fine tune sub page.
Auto/PAL/SECAM
BG/DK/I/L/L’
9
Color System of
the current
channel
Sound System of
the current
channel
Picture Adjustment
OK
OK
▼
1. Press MENU button on the front panel or MENU button on the rremote control
to display the main menu.
2. Press ▲/▼ buttons on the remote control or CH +/ - button s on the front
panel to select the Aicture Setting menu, then press OK or
buttons for the
submenu.
3. Press ▲/▼ buttons on the remote control or CH +/ - buttons on the front
panel to select the item you want to adjust.
4. Press OK button on the remote control and press ▲/ ▼◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
Picture Mode
Press “ OK ” button to enter Picture Mode, then press ▲/▼ but-
Brightness
tons to select : Dynamic, Standard, Mild, User.
Press “ OK ” button to enter Brightness, then press ◄/► buttons
Contrast
to adjust the brightness of the picture.
Press “ OK ” button to enter Contrast, then press ◄/► buttons to
Sharpness
adjust the contrast of the picture.
Press “ OK ” button to enter Sharpness, then press ◄/► buttons
Colour
to adjust the sharpness of the picture.
Press “ OK ” button to enter Colour, then press ◄/► buttons to
Colour Temp
adjust the colour of the picture.
Press “ OK ” button to enter Colour Temp, then press ▲/▼ buttons
to select: Cold, Normal, Warm.
Noise Reduction Press “ OK ” button to enter Noise Reduction, then press ▲/▼ buttons to select: off, low, middle, hight, default.
10
Sound Adjustment
Š
1. Press MENU button on the front panel or MENU button on the remote control
to display the main menu.
2. Press ‰/Š buttons on the remote control or CH +/ - button s on the front
buttons for the
panel to select the S o u n d Setting menu, then press OK or
submenu.
3. Press ‰Š buttons on the remote control or CH +/ - buttons on the front
panel to select the item you want to adjust.
4. Press OK button on the remote control and press ‰/ Š‹Œ buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
Sound Mode
Press “ OK ” button to enter Sound Mode, then press ‰/ Š
Bass
buttons to select : Standard, Movie, Music, Speech, User, Off.
Press “ OK ” button to enter Bass, then press ‹Œ buttons to
Treble
adjust the low frequency content of audio output.
Press “ OK ” button to enter Treble, then press ‹Œ buttons to
Balance
adjust the high frequency content of audio output.
Press “ OK ” button to enter Balance, then press ‹Œ buttons
Surround
to adjust the audio output between left and right speakers.
Press “ OK ” button to enter Surround, then press ‰/ Šbuttons
to adjust Surround mode:On,Off.
SPDIF
Press “ ‰/Š ” button to adjust SPDIF mode: Auto,Off,PCM.
11
Feature Adjustment
▼
1. Press MENU
Ub
button
tton on the front panel orr MENU b
button
tton on the rremote control
to display the main menu.
2. Press ▲/▼ buttons on the remote control or CH +/ - button s on the front
panel to select the Feature Setting menu, then press OK or
buttons for the
submenu.
3. Press ▲/▼ buttons on the remote control or CH +/ - buttons on the front
panel to select the item you want to adjust.
4. Press OK button on the remote control and press ▲/ ▼◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
Lock
Press “ OK ” button to enter L o c k , The Lock sub page
includes four parts:Lock Enable,Parental Guidance,Change
Pin Code,Hotel Mode.
Language
Press “ OK ” button to enter Language, then press ▲/▼ to
select Language that you want.
Clock
Press ◄/► to check out the current system time and set time
zone/DST
Sleep Timer
Press “ OK ” button to enter S l e e p T i m e r , Then press ▲/▼
buttons to set sleep timer:Off,10 Mins, 20 Mins,30Mins, 60Mins,
90 Mins, 120 Mins, 180 Mins, 240 Mins,
Auto Power Off Press “ OK ” button to enter Auto Power Off, then press ▲/▼ buttons to set auto standby : off, 1H, 2H, 4H.
Hearing impared Press ▲/▼to select Hearing impares On or Off.
12
Setup Adjustment
▼
1. Press MENU button on the front panel or MENU button on the remote control
to display the main menu.
2. Press ▲/▼ buttons on the remote control or CH +/- button s on the front
panel to select the Setup Setting menu, then press OK or
buttons for the
submenu.
3. Press ▲/▼ buttons on the remote control or CH +/ - buttons on the front
panel to select the item you want to adjust.
4. Press OK button on the remote control and press ▲/ ▼◄/► buttons to
change the status.
5. Press MENU button to go to the previous menu.
Sub windows info:
OSD Timer
Press ▲/▼button to select OSD Timer:5, 10, 15, 20, 25,
30 Seconds.
PC Setup
Set PC(Only available in PC source).
Blue Screen
Select Blue Screen mode between On and Off.
Reset TV Setting
Reset to default setting.
Software Update
Using the USB device to update sofeware.
13
Media OPERATION
N ote:B efore operating Media menu,P lug in U S B device,then press IN P U T button
to set the Input S ource to Mdeia.
1 . P ress
/
button to select Media in the S ource menu, then press OK
button to enter.
2 . P ress
/
button to select the option you want to adjust in the main menu,then
press OK button to enter.
Sub windows info:
PHOTO
MUSIC
Press / button to select PHOTO in the main menu,
then press OK button to enter.
Select the file you want to watch.
Press menu button to return back to the previous menu
and Exit button to quit.
Press / button to select MUSIC in the main menu,
then press OK button to enter.
Select the file you want to watch.
Press menu button to return back to the previous menu
and Exit button to quit.
MOVIE
Press / button to select MOVIE in the main menu,
then press OK button to enter.
Select the file you want to watch.
Press menu button to return back to the previous menu
and Exit button to quit.
e-Book
Press / button to select e-Book in the main menu,
then press OK button to enter.
Select the file you want to watch.
Press menu button to return back to the previous menu
and Exit button to quit.
14
DVD Functions
Information Funtions
Information Display
An On Screen Display (OSD) indicator will be displayed at the upper
part TV screenwhen certain functions are executed, or when pressing
the OSD button on the remote control.
The OSD indicator is a user friendly interface designed to display the
status of playback type. When a different disc is loaded (DVD, CD, Music
ready); the OSD indicator bar will be different.
Support formats
DVD support DVD / CD-DA / JPEG formats.
DVD Player Functions
Close/Open
To open and close the disc tray. Press OPEN button on the remote.
Play
Press Play button to play the disc.
Pause
Press Pause button to pause (still picture).Press Play button to continue the playback
of the content.
Stop
Press Stop button to stop .
Next Chapter, Track or File
Press this button skip advance DVD chapter or CD track.
Press this button skip backward DVD chapter or CD track.
Rep
Press REP button repeatedly to select the repeat mode.
DVD Menu
While playing a DVD, press the D.MENU button return to the DVD disc menu.
Title
While playing a DVD, press the TITLE button return to the DVD disc title menu.
Audio Track
While playback a DVD disc, press AUDIO button repeatedly to select the desired
audio sound track.
Angle
While playback a DVD disc, press ANGLE button repeatedly to select the desired
camera angle.
15
DVD Menu
Customizing the GENERAL SETUP Settings
Press D.SETUP button to enter setup menu
1.Use the Left and Right buttons select GENERAL SETUP option.
2.Use the Up and Down buttons to highlight an individual GENERAL SETUP option.
TV Type
Cycles among TV Type modes: PAL,Auto,NTSC .
Sreen Saver
This function is used to turn the screen saver On or Off.
TV Display
Cycles among TV Display modes: 4:3 pan scan,4:3 letter box,Wide
Password
Move the cursor the Password item and press OK button to
confirm and then input the secret code “0 0 0 0” (if it is the first use).
Last Memory You can choose On or Off.
Default
Setting the 'Default ' function will reset all options and your
personal settings to the factory defaults and all personal settings
will be erased.
16
DVD Menu
Customizing the Preference SETUP Settings
Press D.SETUP button to enter setup menu
1.Use the Left and Right buttons select Preference SETUP option.
2.Use the Up and Down buttons to highlight an individual Preference SETUP option.
OSD Lang
Audio
Select proper language.
Select proper language.
Subtitle
Select proper language.
Disc Menu
Select proper language.
17
DVD Menu
Customizing the SPEAKER SETUP Settings
Press D.SETUP button to enter setup menu
1.Use the Left and Right buttons select SPEAKER SETUP option.
2.Use the Up and Down buttons to highlight an individual SPEAKER SETUP option.
Dynamic
To optimize the dynamic sound output high volume outputs
are softened, enabling you to watch your favourite movie
without disturbing others.
18
Display
I/O ports
Active screen size
24 inches
HDMI input
PC input
PC audio input
1
1
1
Aspect ratio
16:9
Response time
7ms
YPbPr input
1
Resolution
1920*1080
AV input
RF input
1
1
Contrast
1000:1
USB input
1
Brightness
200
SPDIF output
Headphone output
1
1
Viewing angle
176/176(H/V)
Other
TV Functions
Tuner
Number of channel
Standards
Color system
1
100
B/G, D/K
PAL, SECAM
AV
Progressive scan
3:2/2:2 pull down
Noise reduction
User manual
Dimensions (W*H*D)
572mm×402mm×155mm
Packing size (W*H*D)
730mm×430mm×110mm
Gross weight
5.5 Kg
Power consumption
36 W
Audio
Speaker
2 × 3w
Function
Zoom mode
Picture mode
OSD languages
Return
Sound mode
Audio setting
Auto off
Sleep timer
Auto, 4:3, 16:9, Zoom1,Zoom2
Dynamic, Standard, Mild,
Personal
English, French, Deutsch,Italian,Spanish,Portuguese
Standard, Music, Movie,
Sports, Personal
19
Troubleshooting
No power
• Make sure the TV and the power cord are connected correctly.
• Check if you pressed POWER on the remote control unit. If the indicator in
the front panel is red, press POWER in the remote control or the front
control panel.
LED TV does not operate
• External influences such as lightning or static electricity may cause
improper operation. In this case, operate the unit after first turning on
the power, or un plugging the AC cord and plugging it in again after 1
to 2 minutes.
Power is cut off suddenly
• Check if the off timer or sleep timer are set.
• The unit’s internal temperature has increased. Remove any objects blocking
the vents and clean them to remove dust.
Remote control unit does not operate
• Check if the batteries are inserted with the polarity (+,-) correctly aligned.
• Check if the batteries are discharged. Please replace with new batteries.
• Make sure that you do not use the remote control under strong or
fluorescent lighting.
• Check if there is a fluorescent light illuminated near the remote control
sensor.
• The path of the remote control beam may be blocked; please make sure the
path is clear and that remote control is aimed at the remote control sensor
in the TV.
Picture is cut off /with side bar screen
• Check if the image position is correct.
• Check if the screen mode adjustments such as picture size are made
correctly.
Strange color, light color, or color misalignment
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting.
20
Palsonic Customer Service
Telephone (Australia) 1300 657 888
Palsonic Corporation Pty Ltd ABN 34 000 474 108
1 Joynton Avenue, Waterloo NSW 2017 Australia
Telephone (02) 9313 7111 Facsimile (02) 9697 0655
www.palsonic.com.au