HP Officejet 4630 e-All-in-One, HP Deskjet Ink

Product environmental attributes – THE ECO DECLARATION
The declaration may be published only when all rows and/or fields marked with an * are filled-in (n.a. for not applicable).
Additional information regarding each item may be found under P14.
Brand *
Hewlett-Packard
Company name *
Hewlett-Packard
Contact information *
Hans Wendschlag
http://www.hp.com/hpinfo/globalcitizenship/environment/contactem
ail
Internet site *
http://www.hp.com/hpinfo/globalcitizenship/environment/
Logo
Additional information
The company declares (based on product specification or test results based obtained from sample testing), that the product
conforms to the statements given in this declaration.
Type of product *
Inkjet Multifunction Printer
Commercial name *
HP Officejet 4630 e-All-in-One, HP Deskjet Ink Advantage 4645 e-All-in-One
Model number *
B4L03A,B4L03B,B4L03C,B4L04A,B4L05A,B4L07A,B4L06B,D4J74A,D4J75A,D4J76A,D4J77B,D4J78B,
B4L10A,B4L10B,B4L10C,B4L09A,B4L08B
Issue date *
September 2013
Intended market *
Global
Europe
Asia, Pacific & Japan
Americas
Other
Additional information
This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.
Quality Control
Item
QC1 *
QC2 *
Requirement met
Yes
The company enforces an internal quality control scheme to ensure the correctness of this eco declaration
The company is a member of an eco declaration system that enforces regular independent quality control
such as organized by IT-Företagen (see www.itecodeclaration.org).
th
Annex B of ECMA-370 4 e d i t i o n A m e n d e d , F e b r u a r y 2 0 1 0
Page 1 (6)
No
Model number *
Issue date *
B4L03A,B4L03B,B4L03C,B4L04A,B4L05A,B4L07A,B4L06B,D4J74A,D4J75A,D4J76A,D4J77B,D4J78B,
B4L10A,B4L10B,B4L10C,B4L09A,B4L08B
Logo
September 2013
Product environmental attributes - Legal requirements
Item
P1
P1.1*
P1.2*
P1.3*
P1.4*
P1.5*
P1.6*
P1.7*
P1.8*
P1.9*
P1.10*
P2
P2.1*
Requirement met
Yes
P3
P3.1*
P3.2*
The product complies with legally required standards for electromagnetic compatibility (see legal reference).
P3.3*
If product is intended for connection to a public telecom network or contains a radio transmitter, it complies
with legally required standards for radio and telecommunication devices (see legal reference).
The product is labeled to show conformance with applicable legal requirements (see legal reference).
P2.3*
P3.4*
P4
P4.1*
P4.2*
P4.3*
P5
P5.1*
P5.2*
P5.3*
n.a.
http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/reachprinting-andim.html
Batteries
If the product contains a battery or an accumulator, it is labeled with the disposal symbol and if it contains
more than 0.0005% of mercury (for button cells only) by weight, or more than 0.004% of lead, it shall be
marked with the chemical symbol for the metal concerned, Hg or Pb. Information on proper disposal is
provided in user manual. (See legal reference)
Button cells used in the product do not contain more than 2% by weight of mercury. Other batteries or
accumulators do not contain more than 0.0005% of mercury or 0.002% of cadmium. (See legal reference)
Batteries and accumulators are easily removable by either users or service providers (as dependent on the
design of the product). Exception: Batteries that are permanently installed for safety, performance, medical
or data integrity reasons do not have to be “easily removable”. (See legal reference)
Safety, EMC connection to the telephone network and labeling
The product complies with legally required safety standards as specified (see legal reference).
P2.2*
No
Hazardous substances and preparations
Products do not contain more than; 0.1% lead, 0.01% cadmium, 0.1% mercury, 0.1% hexavalent chromium,
0.1% polybrominated biphenyls (PBB) or 0.1% polybrominated diphenyl ethers (PBDE). (See legal
reference and Note B1)
Products do not contain Asbestos (see legal reference).
Comment: Legal reference has no maximum concentration value.
Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC),
hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum
concentration values.
Products do not contain more than; 0.005% polychlorinated biphenyl (PCB), 0.005% polychlorinated
terphenyl (PCT) in preparations (see legal reference).
Products do not contain more than 0.1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the
chain containing at least 48% per mass of chlorine in the SCCP (see legal reference).
Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS),
Tris-(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (see legal reference).
Comment: Legal reference has no maximum concentration values.
Textile and leather parts with direct skin contact do not contain more than 0.003% Azo colorants that split
aromatic amines. (See legal reference and Note B1)
Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as
pentachlorophenol and derivatives (see legal reference).
Comment: Legal reference has no maximum concentration values.
Parts with direct and prolonged skin contact do not release nickel in concentrations above 0.5
microgram/cm2/week (see legal reference).
Comment: Max limit in legal reference when tested according to EN1811:1998.
REACH Article 33 information about substances in articles is available at (add URL or mail contact):
Consumable materials
If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium max 0.01% (see
legal reference and Note B1).
If ink/toner is used in the product, it does not contain cadmium max 0.1% by weight (see legal reference).
If the ink/toner formulation/preparation is classified as hazardous according to applicable regulations, the
product/packaging is adequately labeled and a Safety Data Sheet (SDS) in accordance with these
requirements is available (see legal reference).
Product packaging
Packaging and packaging components do not contain more than 0.01% lead, mercury, cadmium and
hexavalent chromium by weight of these together.
Plastic packaging material is marked according to ISO 11469 referring ISO 1043 (see legal reference).
The product packaging material is free from ozone depleting substances as specified in the Montreal
Protocol (see legal reference).
Comment: Legal reference has no maximum concentration values.
Note B1: Restriction applies to the homogeneous material, unless other specified and expressed in weight %.
Annex B of ECMA-370 4
th
edition Amended, February 2010
Page 2 (6)
Model number *
Issue date *
B4L03A,B4L03B,B4L03C,B4L04A,B4L05A,B4L07A,B4L06B,D4J74A,D4J75A,D4J76A,D4J77B,D4J78B,
B4L10A,B4L10B,B4L10C,B4L09A,B4L08B
Logo
September 2013
Product environmental attributes - Market requirements - Environmental conscious design
Requirement met
Item
P6
P6.1*
*=mandatory to fill in. Additional information regarding each item may be found under P14.
Treatment information
Information for recyclers/treatment facilities is available (see legal reference).
P7
P7.1*
Design
Disassembly, recycling
Parts that have to be treated separately are easily separable
P7.2*
Plastic materials in covers/housing have no surface coating.
P7.3*
Plastic parts >100g consist of one material or of easily separable materials.
P7.4*
Plastic parts >25g have material codes according to ISO 11469 referring ISO 1043.
P7.5
Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P7.6*
Labels are easily separable. (This requirement does not apply to safety/regulatory labels).
P7.7*
Product lifetime
Upgrading can be done e.g. with processor, memory, cards or drives
P7.8*
Upgrading can be done using commonly available tools
P7.9.
Spare parts are available after end of production for:
P7.10
P7.12
Service is available after end of production for:
years
Material and substance requirements
Product cover/housing material type:
Material type: HIPS
Material type: ABS
Electrical cable insulation materials of power cables are PVC free.
P7.13
Electrical cable insulation materials of signal cables are PVC free
P7.14
All cover/housing plastic parts >25g are free from chlorine and bromine.
P7.15
All printed circuit boards (without components) >25g are halogen free. as defined in IEC61249-2-21. (See
Note B2)
Flame retarded plastic parts >25g in covers / housings are marked according ISO 1043-4:
Marking:
Alt. 1
Chemical specifications of flame retardants in printed circuit boards >25g (without components):
TBBPA (additive)
, TBBPA (reactive)
, Other; chemical name:
, CAS #:
P7.11*
P7.16
P7.17
Yes
No
n.a.
years
Material type:
Alt. 2
Chemical specifications of flame retardants in printed circuit boards (without components) >25g according
ISO 1043-4:
P7.18
Alt. 1
Flame retarded plastic parts >25g contain the following flame retardant substances/preparations in
concentrations above 0.1%:
Comment: No legal limits exist, this is a market requirement.
1. Chemical name:
, CAS #:
2. Chemical name:
, CAS #:
3. Chemical name:
, CAS #:
Alt. 2
Chemical specifications of flame retardants in plastic parts >25g according ISO 1043-4:
P7.19
Plastic parts >25g are free from flame retardant substances/ preparations above 0.1% classified as R45,
R40, R46, R48, R50, R51, R53, R60, R61 and any combination of these (See Note B3)
P7.20
P7.21
P7.22
P8
P8.1*
Of total plastic parts’ weight >25g, recycled material content is
%.
Of total plastic parts’ weight >25g, biobased material content is
%.
Light sources are free from mercury
If mercury is used specify: Number of lamps:
and max. mercury content per lamp:
Batteries
Battery chemical composition: LiMnO2
P8.2
Batteries meet the requirements of the following voluntary program/s:
mg
Note B2: IEC61249-2--21 has maximum limits for chlorine and bromine but does not address fluorine, iodine and astatine
which are included in the group of halogens.
Note B3: 'Starting from January 2009, Risk phrases can be replaced by Hazard phrases according to the Globally
Harmonized System (GHS), mandatory by December 2010.
Annex B of ECMA-370 4
th
edition Amended, February 2010
Page 3 (6)
Model number *
B4L03A,B4L03B,B4L03C,B4L04A,B4L05A,B4L07A,B4L06B,D4J74A,D4J75A,D4J76A,D4J77B,D4J78B,
B4L10A,B4L10B,B4L10C,B4L09A,B4L08B
Logo
September 2013
Issue date *
Product environmental attributes - Market requirements (continued)
Item
P9
9.1
Requirement met
Yes
No
Energy mode *
Power
level
100 V AC
at Power level
115 V AC
W
®
at Power level
230 V AC
W
at Reference / Standard
modes and test method *
for
energy
W
ENERGY STAR® Imaging Equipment
Test Method (Ver. 1.2)
ENERGY STAR® Imaging Equipment
Test Method (Ver. 1.2)
ENERGY STAR Ready
Mode
ENERGY STAR® Sleep Mode
3.08 W
3.07 W
3.16 W
0.60 W
0.60 W
0.63 W
ENERGY STAR® Off Mode
0.12 W
0.12 W
0.12 W
ENERGY STAR® Imaging Equipment
Test Method (Ver. 1.2)
ENERGY STAR® Auto-Off
Mode
NA W
NA W
NA W
ENERGY STAR® Imaging Equipment
Test Method (Ver. 1.2)
W
W
W
EPS No-load
(External power supply /
charger plugged in the wall
outlet but disconnected from
the product.)
PTEC *
Typical Energy Consumption
W
W
W
W
W
W
TEC *
Typical Energy Consumption
kWh/week
kWh/week
kWh/week
ETEC *
Annual Energy Consumption
kWh/year
kWh/year
kWh/year
Display resolution* :
Print Speed *
ENERGY STAR® Program for External
Power Supplies (Ver. 2.0)
Megapixels
: up to 8.8/5.2 Images per minute (ISO speed)
Default time to enter energy save mode:
minutes
P9.2*
Information about the energy save function is provided with the product.
P9.3*
The product meets the energy requirements of the following voluntary program/s:
ENERGY STAR version:2.0 Tier:
Product category: Imaging Equipment, OM2
Others specify:
Emissions
Noise emission – Declared according to ISO 9296
Mode
Mode description
Declared
Declared A-weighted
A-weighted
sound pressure level L pAm (dB)
sound power
Bystander positions
level L
(B) Operator position
P10
P10.1
n.a.
Energy consumption
For the product the following power levels or energy consumptions are reported:
WAd
Desktop
or Desk side
Idle
Operation
Other mode
* Ready
* Printing Mono
Printing Color
* 2.8 Bels (A)
* 6.4 Bels (A)
5.9 Bels (A)
(only if product is not
operator attended)
15 (dBA)
52 (dBA)
48 (dBA)
Measured according to:
P10.2
ISO7779
ECMA-74
Other
(only if not covered by ECMA-74 with L pAm measurement distance
The product meets the acoustic noise requirements of the following voluntary program/s:
Annex B of ECMA-370 4
th
edition Amended, February 2010
m)
Page 4 (6)
Model number *
Issue date *
B4L03A,B4L03B,B4L03C,B4L04A,B4L05A,B4L07A,B4L06B,D4J74A,D4J75A,D4J76A,D4J77B,D4J78B,
B4L10A,B4L10B,B4L10C,B4L09A,B4L08B
Logo
September 2013
Product environmental attributes - Market requirements (continued)
Requirement met
Item
P10.3*
P10.4
P10.5
P10.6
P11
P11.1*
P11.2*
Yes
P11.3*
Paper containing post-consumer recycled fibers can be used, provided that it meets the requirements of
EN12281.
2-sided (duplex) printing/copying is an integrated product function.
P12
P12.1*
Ergonomics for computing products
The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies.
P12.2*
The physical input device meets the requirements of ISO 9995 and ISO 9241-410.
P13
P13.1*
Packaging and documentation
Product packaging material type(s): Cardboard & Misc
Product packaging material type(s): PLASTIC/EPS/PLASTIC/LDPE/PLASTIC/PS
Product packaging material type(s):
P13.2*
Product plastic packaging is free from PVC.
P13.3*
Specify media for user and product documentation (tick box):
Electronic
, Paper
, Other
For paper user and product documentation, please specify contained percentage of post-consumer recycled
fiber: 0%
User and product documentation do not contain chlorine bleached paper
P13.4*
Rev.
P13.5
P14
All
P9
P10.1
P10.3
P11.3
No
n.a.
Chemical emissions from printing products
Test performed according to ECMA-328 (ISO/IEC 28360) standard
, other specify:
Typical emission rate (print phase) is (mg/h):
Dust
Ozone
Styrene
Benzene
TVOC
Chemical emission requirements of the following voluntary program/s
are met for :
Dust
Ozone
Styrene
Benzene
TVOC
Electromagnetic emissions
Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary
program/s:
Consumable materials for printing products
A Safety Data Sheet (SDS) is available for the ink/toner preparation, even if not legally required (see P4.3).
weight (kg): 0.802
weight (kg): 0.14
weight (kg):
Additional information (See Note B4)
Product environmental information contained in this declaration is valid as of the date the declaration is published. Changes to
external standards referenced in the IT Eco-Declaration may invalidate some information contained in this declaration over time.
1. Many printers are offered in multiple configurations within the model family. Energy efficiency data listed in this declaration is
for an ENERGY STAR® qualified configuration if offered within the model family . HP printers marked with the ENERGY
STAR® Logo qualify for the U.S. Environmental Protection Agency (EPA) ENERGY STAR® award for imaging equipment.
For more information about HP’s ENERGY STAR® qualified products, go to hp.com: http://www.hp.com/ and select the
applicable market segments and product categories to find printers or scanners that meet the ENERGY STAR®
specifications.
2. If a model family does not offer ENERGY STAR® qualified configurations, then energy efficiency data listed is for a typically
configured model.
3. Energy Efficiency information published on the ECMA 370 The Eco Declaration represents a typically configured product
base that qualifies for ENERGY STAR® if offered within the model family. If optional components or modules are added,
these can change the energy efficiency data listed above.
1. Acoustic noise information published on the ECMA 370 The Eco Declaration represents a typically configured product base
model only. If optional items with moving parts are added, these can change acoustic noise values for which HP can take no
responsibility.
1.
Chemical emissions tests are perfomed on a representative product base model only. HP Deskjet 2050 All-in-One
Manual duplexing enabled via printer software
Note B4: Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and
hitting the <Enter> key.
Annex B of ECMA-370 4
th
edition Amended, February 2010
Page 5 (6)
Legal references Europe Annex B
Ref e re nc e
De cl a r at io n it e m
2002/95/EC (ROHS Directive)
P1.1, P4.1
REACH, Annex XVII
P1.6, P1.8, P4.2
REACH, Annex XVII
P1.4
REACH, Annex XVII
P1.2
REACH, Annex XVII
P1.7
REACH, Annex XVII
P1.9
Regulation (EC) No. 2037/2000, 2038/2000, 2039/2000
P1.3
N o r we g i a n r e g u l a t i o n r e l a t i n g t o r e s t r i c t i o n s o n t h e u s e
of certain dangerous chemicals 20.12.2002
P1.5
2006/66/EC (Battery and accumulators Directive)
P2.1, P2.2, P2,3, P3.4, P8.1
2006/95/EC (Low Voltage Directive)
P3.1, 3.4
2004/108/EEC (New EMC Directive)
P3.2, 3.4
1 9 9 9 / 5 / E C ( R & T TE D i r e c t i v e )
P3.3, 3.4
“REACH" Regulation (1907/2006), annex VII
P1.10
(EC) No.1272/2008 regulation on classification, labeling
and packaging (CLP)
P4.3
REACH article 31, annex II
P4.3
2004/12/EC (Directive on packaging and packaging
waste)
P5.1
(97/129/EC) (Commission Decision on Identification
S ys t e m f o r P a c k a g i n g M a t e r i a l s
P5.2
2037/2000/EC Regulation on Substances that Deplete
t h e O zo n e L a y e r
P5.3
2 0 0 2 / 9 6 / E C (W E E E d i r e c t i v e )
P3.4, P6.1
(EC) No.1272/2008 regulation on classification, labeling
and packaging (CLP)
P7.19
Annex B of ECMA-370 4
th
edition Amended, February 2010
Page 6 (6)