User Manual - Projector Central

Owner's Manual
DLP PROJECTOR
Please read this manual carefully before operating
your projector and retain it for future reference.
PB62G
www.lg.com
(Brazil : www.lge.com)
2
LICENSES
LICENSES
Supported licenses may differ by model. For more information about licenses,
visit www.lg.com.
Manufactured under license from Dolby Laboratories.
“Dolby “and the double-D symbol are trademarks of Dolby
Laboratories.
ABOUT DIVX VIDEO: DivX® is a digital video format created
by DivX, LLC, a subsidiary of Rovi Corporation. This is an
official DivX Certified® device that plays DivX video. Visit divx.
com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu.
Go to vod.divx.com for more information on how to complete
your registration.
“DivX Certified® to play DivX® video up to HD 1080p,
including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks
of Rovi Corporation or its subsidiaries and are used under
license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
This device meets the EMC requirements for home appliances (Class B) and is
intended for home usage. This device can be used in all regions.
NOTE
yyImage shown may differ from your projector.
yyYour projector’s OSD (On Screen Display) may differ slightly from that shown in
this manual.
ING/CAUTION
ELECTRIC SHOCK
O NOT OPEN
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Please take note of the safety instructions to prevent any potential accident or misuse
of the projector.
yySafety precautions are given in two forms, i.e. Warning and Caution as detailed
below.
WARNING: Failure to follow the instructions may cause serious injury and even
death.
CAUTION: Failure to follow the instructions may cause injury to persons or
damage to the product.
yyRead the owner's manual carefully and keep it to hand.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/CAUTION
The
lightning flash with
RISK OF ELECTRIC SHOCK
arrowhead
symbol, within
DO NOT OPEN
an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
3
4
SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
WARNING
yyDo not place the projector in direct
sunlight or near heat sources such as
radiators, fires, stoves, etc.
- This may cause a fire.
yyDo not place flammable materials
such as aerosols near the projector.
- This may cause a fire.
yyDo not allow your children to cling to
or climb up to the projector.
- The projector may fall down and
cause personal injury or death.
yyDo not place the projector directly on
a carpet, rug or place where ventilation is restricted such as a book shelf
or closet.
- This may cause the projector's internal temperature to rise and cause
a fire.
yyDo not place the projector close to
sources of steam or oil such as a
humidifier or kitchen counter.
- This may cause a fire hazard or an
electric shock.
yyDo not place the projector where it
might be exposed to excessive dust.
- This may cause a fire.
yyDo not use the projector in a damp
place such as a bathroom where it is
likely to get wet.
- This may cause a fire or an electric
shock.
Do
yy not allow a tablecloth or curtain to
block the vents.
- This may cause the internal temperature of the projector to rise and
cause a fire.
The
yy distance between the projector
and the wall should be more than
30 cm for ventilation purposes.
- Otherwise, this may cause the internal temperature of the projector to
rise and cause a fire.
CAUTION
yyWhen installing the projector on a
table, be careful not to place it near
the edge.
- The projector may fall causing injury
to persons or damage to the projector. Make sure that you use a stand
suitable for the size of projector.
yyTurn off the projector, disconnect the
power supply and remove all connec
tions before moving the projector.
- A damaged cord may cause a fire
or an electric shock.
yyDo not install the projector on an
unstable or vibrating surface such as
a vibrating shelf or tilted surface.
- It may fall and cause injury.
yyBe careful not to tip the projector over
when connecting external devices to
the projector.
- This may cause injury to persons or
damage to the projector.
SAFETY INSTRUCTIONS
Power
WARNING
yyThe earth wire should be connected.
- Inappropriate earth grounding may
cause damage to the projector or
an electric shock when there is an
electrical surge.
If the projector must be installed at
a place where earth grounding is not
possible, purchase a circuit breaker
and connect the projector to its wall
outlet.
Do not ground the projector to the
gas pipe, water pipe, lightning rod,
or telephone line, etc.
yyThe power plug should be fully inserted into the wall outlet.
- Unstable connection may cause a
fire.
yyDo not place heavy objects on the
power cord or place the cord underneath the projector.
- This may cause a fire or an electric
shock.
yyNever touch the power plug with a
wet hand.
- This may cause an electric shock.
yyDo not connect too many devices to
the same power extension.
- Overheating may cause a fire.
yyRemove dust or contaminants around
power plug pins or wall outlets.
- This may cause a fire.
yyTo turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
5
CAUTION
yyHold the plug firmly when unplugging.
- A broken wire in the cord may
cause a fire.
yyEnsure the power cord or plug is not
damaged, modified, severely bent,
twisted, pulled, sandwiched or heated.
Do not use a loose wall outlet.
- This may cause a fire or an electric
shock.
yyKeep the power cord away from any
heating devices.
- The cord coating may melt and
cause an electric shock.
yyPlace the projector where people will
not trip over or tread on the power
cord or plug to protect the power
cord and plug from any damage.
- This may cause a fire hazard or an
electric shock.
yyDo not turn the projector on or off by
plugging in the power plug or unplugging it from the wall outlet.
(Do not use the power plug as a
switch.)
- This may cause an electric shock or
damage to the projector.
yyDo not insert a conductor into the
other side of the wall outlet while the
power plug is inserted into the wall
outlet.
In addition, do not touch the power
plug immediately after it is disconnected from the wall outlet.
- This may cause an electric shock.
yyUse only the official power cord which
is provided by LG Electronics, Inc. Do
not use other power cords.
- This may cause a fire or an electric
shock.
6
SAFETY INSTRUCTIONS
When in Use
WARNING
yyDo not place anything containing
liquid, such as a vase, flowerpot, cup,
cosmetics, chemicals, decorations or
candles, etc., on top of the projector.
- Possible fire, electric shock, or falling may cause physical injury.
In
yy the event that there is a big impact to the projector or the cabinet is
damaged, switch it off, unplug it from
the wall outlet and contact an authorized service center.
- Otherwise, this may cause a fire or
an electric shock.
Do
yy not insert pieces of metal such as
coins, hairpins or metal debris, nor
flammable materials such as paper or
matches into the projector.
- This may cause a fire or an electric
shock.
In
yy the event that liquid or a foreign
object falls into the projector, please
switch it off and unplug it from the
wall outlet and contact an LG Electronics Service Center.
- Otherwise, this may cause a fire or
an electric shock.
When
replacing a battery of the reyy
mote control, make sure a child does
not swallow the battery. Keep the battery out of reach of children.
- In the case of a battery being swallowed by a child, please consult a
doctor immediately.
Never
open any cover on the projector.
yy
There is a high risk of electric shock.
yyDo not look directly into the lens
when the projector is in use. The
strong light may damage your eyes.
yyWhen the lamp is on or has just been
turned off, avoid touching the air vent
or lamp because these will be very
hot.
yyIf there is a gas leak, do not touch
the wall outlet. Open the window for
ventilation.
- A spark may cause a fire or burn.
yyNever touch the projector or power
cord during thunder or lightning.
- This may cause an electric shock.
yyDo not use the projector near an
electronic device which generates a
strong magnetic field.
yyStore the vinyl envelope used to pack
the projector in a safe place away
from children.
- It could cause suffocation if used
improperly.
yyDo not use 3D glasses if you do not
watch 3D.
yyDo not keep your hand on the projector for a long time when it is running.
yyWhen you play a game by connecting
a game console to a projector, it is
recommended that you maintain a
distance of more than four times the
diagonal length of the screen.
yyMake sure that the length of
connecting cable is long enough.
Otherwise, the product may fall
causing personal injury or damage to
the product.
SAFETY INSTRUCTIONS
CAUTION
yyDo not place a heavy object on the
projector.
- It may fall down and cause physical
injury.
Be
yy careful to prevent the lens from
heavy impact during transportation.
yyDo not touch the lens.
The lens may be damaged.
yyDo not use any sharp tools on the
projector such as a knife or hammer,
because this may damage the casing.
yyIn the event that no image appears
on the screen, switch the projector
off, unplug it from the wall outlet and
contact an authorized service center.
- Otherwise, this may cause a fire or
an electric shock.
Do
yy not drop an object onto the projector or apply heavy pressure to it.
- This may cause injury to persons or
damage to the projector.
The
yy distance between your eyes
and the screen must be around 5 7 times the diagonal length of the
screen.
- If you watch the screen at a close
distance for a long time, your eye
sight may become worse.
7
Cleaning
WARNING
yyDo not spray the projector with water
when cleaning. Do not allow water to
go into the projector or do not allow it
to get wet.
- This may cause a fire or an electric
shock.
When
there is smoke or a strange
yy
smell coming out from the projector
or a foreign object falls into the projector, please switch it off and unplug
it from the power outlet and contact
an LG Electronics Service Center.
- If not, this may cause a fire or an
electric shock.
Use
yy an air spray or soft cloth or
cotton swab moistened with a lens
cleaning chemical or alcohol to
remove dust or stains on the front
projection lens.
8
SAFETY INSTRUCTIONS
CAUTION
yyContact your seller or the Service
Center once a year to clean the internal parts of the projector.
- If you do not clean the contaminated interior of the projector for a long
time, there may be a fire or damage
to the projector.
yyWhen cleaning plastic parts such as
the projector case, unplug the power
first and wipe with a soft cloth. Do
not spray with water or wipe with a
wet cloth. When cleaning the plastic
parts, such as the projector case,
do not use cleanser, automobile or
industrial shiner, abrasive or wax, benzene, alcohol, etc., which can damage
the product.
- This can cause fire, electric shock or
product damage (deformation, corrosion and damage).
OTHERS
WARNING
yyOnly a qualified technician can disassemble or modify the projector. For
inspection, adjustment, or repair, contact your seller or the Service Center.
- Otherwise, this may cause a fire or
an electric shock.
yyDispose of the used battery properly.
- Otherwise, this may result in
explosion or fire.
yyThe correct method of disposal may
vary depending on your country
or region. Dispose of the battery
pack according to the appropriate
instructions.
yyDo not throw or disassemble the
battery.
-Otherwise, this may result in fire or
explosion due to damage to the
battery.
yyAlways use batteries approved and
certified by LG Electronics.
- Otherwise, this may result in fire or
explosion.
yyStore the battery away from metallic
objects, such as keys and paper clips.
yyExcess current may cause a rapid
increase in temperature, resulting in
fire or burns.
yyDo not store the battery near any
heat source, such as a heater.
- This may result in fire or damage
the product.
yyDo not store it at temperatures higher
than 60 °C or in high humidity.
SAFETY INSTRUCTIONS
yyKeep the battery out of reach of children.
- This may result in personal injury or
damage to the product.
Make
sure that the battery is installed
yy
correctly.
yyIncorrect battery replacement may
cause fire.
CAUTION
yyUnplug the power cord if the projector is not used for a long period.
- Accumulated dust may cause
overheating, an electric shock from
corroded insulation and a fire from an
electrical surge.
yyOnly use the specified type of battery.
- Otherwise, this may cause an electric shock caused by overheating
and leakage.
yyMake sure you use the same type
of battery when replacing. (Battery
CR2032/3V)
-In the case of a battery contact
failure, the battery may drain quickly
or the remote control may not work
properly.
9
10
Contents
Contents
LICENSES
2
SAFETY INSTRUCTIONS
3
PREPARATION
11
Accessories
11
Optional Extras
12
Parts and Components
13
Installation
14
-- Installation Precautions
14
-- Projection Distance per Screen Size 15
-- How to Install the Projector Using a
Tripod
16
-- Kensington Security System
16
REMOTE CONTROL
17
USING THE PROJECTOR
19
Watching Projector
-- Turning on the Projector
-- Focus and Position of the Screen
Image
-- Watching Projector
Using Additional Options
-- Adjusting Aspect Ratio
-- Using the Keystone
Function
-- Using the Input List
-- Blank Function
Using the Quick Menu
19
19
ENTERTAINMENT
19
19
20
20
21
21
22
22
23
Using WiDi
23
-- Connecting to WiDi
23
-- WiDi (Wireless Display) Setup
24
MY MEDIA
25
-- Connecting USB Storage Devices25
-- MOVIE LIST
27
-- PHOTO LIST
-- MUSIC LIST
-- FILE LIST
33
35
37
3D FUNCTION
39
Before Watching 3D
39
-- While Watching 3D
39
Requirements for Watching 3D Images 41
-- To Use DLP-LINK (DLP-Ready) Type
Glasses
43
Watching 3D Images
43
CUSTOMIZING SETTINGS
44
SETUP Menu
PICTURE Settings
AUDIO Settings
TIME Settings
OPTION Settings
44
45
48
49
50
MAKING CONNECTIONS
52
Connecting to an HD Receiver, DVD, or
VCR Player
53
-- HDMI Connection
53
Connecting to a PC
53
-- RGB Connection
53
Connecting to the AV INPUT
54
-- Component Connection
55
Connecting to Headphones
55
MAINTENANCE
56
Cleaning the Projector
-- Cleaning the Lens
-- Cleaning the Projector Case
56
56
56
SPECIFICATIONS
57
PREPARATION
PREPARATION
Accessories
Check enclosed accessories.
The picture may be different from an actual product.
219'4
+0276
/76'
2#)'
81.7/'
#761
$.#01-
':+6ꕯ
ꕣ
5'66+0)5
3/'07
56+..
4#6+1
/#4-
-';5
&
75$
-';5
.4
Remote Control
Lithium Battery
(CR2032/3V)
Owner's Manual
CD Owner's manual
AC-DC Adaptor
Power Cord
Pouch

Computer Cable
Composite Gender
USB Extension
Cable
Wi-Fi dongle
yyWhen connecting a cable to the HDMI or USB port,
it may not be connected properly if the size of jack to
the USB/HDMI port is too big. Use a standard sized
jack.
11
12
PREPARATION
Optional Extras
To purchase optional extras, visit an electronics store or online shopping site or contact
the retail store where you purchased the product.
Without prior notice, optional extras are subject to change in order to improve the performance of the product, and new accessories may be added.
Screen for Projector
Tripod
HDMI Cable
Video Cable
Audio Cable
3D glasses
(DLP-LINK or DLPReady Type)
RGB to Component cable
Component Cable
PREPARATION
13
Parts and Components
* The projector is manufactured using high-precision technology. You may, however,
see tiny black dots and/or bright colored dots (red, blue or green) that continuously
appear on the projector screen. This is a normal result of the manufacturing process
and does not indicate a malfunction.
Control Panel
Back
Speaker
Vent1
Speaker
Lens2
Focus ring
Button
(Power)
(Menu)
∧, ∨, <, >
ꔉ (OK)
Description
Turns the projector on or off.
Selects or closes menus.
Sets the function or moves the cursor.
Checks present mode and saves function changes.
1 Due to the high temperature air coming out of the vents, do not get close to the
vents.
2Do not touch the lens when using the projector. The lens may be damaged.
14
PREPARATION
Installation
Installation Precautions
yyPlace the projector in a well-ventilated environment.
- To prevent internal heat from building up, install the projector in a wellventilated place.
Do not place anything near the projector as this may block its air vents.
If the air vents are blocked, the internal temperature will increase.
- Do not place the projector on a carpet or rug. If a projector model has
its inlet vent on its bottom, do not
block the vent and use the projector
on a leveled solid surface.
- Be sure to prevent foreign objects
such as paper debris from entering
the projector.
- Leave an adequate distance (30 cm
or more) around the projector.
yyDo not place the projector in a hot or
humid environment.
- Do not place the projector in a
hot, cold, or humid environment.
(See 57Page regarding operating
temperature and humidity.)
yyDo not place the projector in a place
where it will easily attract dust.
- This may cause a fire.
yyNever open any cover on the projector.
There is a high risk of electric shock.
yyThe projector is manufactured using
high-precision technology. You may,
however, see tiny black dots and/
or bright colored dots (red, blue or
green) that continuously appear on
the projector screen. This is a normal
result of the manufacturing process
and does not indicate a malfunction.
yyThe remote control may not work
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
internationally standardized lamp for
the remote control to work normally.
PREPARATION
15
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or audio/video
source.
2Place the projector at an appropriate distance from the screen. The distance between the projector and the screen determines the actual size of the image.
3Position the projector so that the lens is set at a right angle to the screen. If the
projector is not set at a right angle, the image on the screen will be tilted and the
image quality will be poor. If the screen image is crooked, use the Keystone function.
(see page21)
4Connect the power cords of the projector and the connected devices to the wall
outlet.
Ratio of upward projection: 100 %
Screen Width (Y)
Screen Height (X)
DISPLAY
X/2
X/2
Y/2
DISPLAY
30 mm
Y/2
Projection distance (D)
Projection distance (D)
16:10 Screen
Screen Size (mm)
Screen Width (Y) (mm)
Screen Height (X) (mm)
Projection Distance (D) (mm)
635
762
538
337
803
646
404
889
966
754
471
1130
1016
861
539
1293
1143
969
606
1456
1270
1077
673
1619
1397
1185
741
1783
1524
1292
808
1946
1651
1400
875
2109
1778
1508
943
2272
1905
1615
1010
2436
2032
1723
1077
2599
2159
1831
1145
2762
2286
1938
1212
2925
2413
2046
1279
3089
2540
2154
1347
3252
16
PREPARATION
How to Install the Projector Using a Tripod
yyYou can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
yyWhen stabilizing the tripod, we recommend using the locking bolt of standard size
4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm.
(If it is longer than the maximum allowed size, it may damage the projector.)
Bottom side of the
projector
Bolt used to fix
the projector
⇒
+
The projector is connected
to this part.
Tripod
Kensington Security System
yyThis projector has a Kensington Security System Connector on the panel. Connect a
Kensington Security System cable as below.
yyFor detailed installation and use of the Kensington Security System, refer to the
user’s guide included with the Kensington Security System set.
yyThe Kensington Security System is an optional item.
yyWhat is Kensington?
Kensington is a company that sells security systems that prevent expensive electronic equipment such as a computer or notebook from being stolen.
Internet Homepage: http://www.kensington.com
REMOTE CONTROL
17
REMOTE CONTROL
Open the battery cover on the back of the remote control and insert the
specified batteries as per instructions
.
①
219'4
+0276
/76'
②
POWER
Turns the projector on or off.
INPUT
Changes the input source.
MUTE
Mutes all sounds.
VOLUME +, Adjusts the volume level.
PAGE ︿, ﹀
Moves to the previous or next screen.
2#)'
81.7/'
#761
$.#01-
':+6ꕯ
ꕣ
5'66+0)5
3/'07
56+..
4#6+1
/#4-
-';5
&
75$
-';5
.4
AUTO
Automatically adjusts the RGB-PC input image.
BLANK
Turns the projector screen on or off.
Up/Down/Left/Right Buttons
Sets the function or moves the cursor.
OK ꔉ
Checks present mode and saves function changes..
EXITꕯ
Clears all on-screen displays and returns to projector viewing.
ꕣ
Returns to the previous level.
SETTINGS
Selects or closes menus.
Q.MENU
Accesses the quick menu.
18
REMOTE CONTROL
219'4
+0276
/76'
2#)'
81.7/'
#761
$.#01-
':+6ꕯ
ꕣ
5'66+0)5
3/'07
56+..
4#6+1
/#4-
-';5
&
75$
-';5
.4
STILL
Freezes the moving image.
(Available in any mode other than USB mode.)
RATIO
Resizes an image.
USB
Accesses USB mode.
MARK
Allows you to select optional functions.
KEY.S ▲▼
Adjusts Keystone.
Playback Control Buttons
Controls playback of MY MEDIA.
3D
Shows 3D images.
L/R
Switches left and right in 3D mode.
Color buttons
Access special functions in some menus.
NOTE
yyWhen using the remote control, the optimal remote range is less than
3 meters (left/right) and within a 30 degree arc of the IR receiver.
yyFor seamless operation, do not block the IR receiver.
yyWhen you carry the remote control in the portable bag, make sure that the buttons
on the remote control are not pressed by the projector, cables, documents or any
other accessories in the bag. Otherwise, it may significantly reduce the battery life.
30° 30°
219'4
+0276
/76'
2#)'
81.7/'
#761
$.#01-
':+6ꕯ
ꕣ
5'66+0)5
3/'07
56+..
4#6+1
/#4-
-';5
&
75$
-';5
.4
Using the PROJECTOR
19
Using the PROJECTOR
Watching Projector
Turning on the Projector
1 Connect the power cord correctly.
2After waiting for a moment, press
the POWER button on the remote
control or the control panel.
3In the Language Selection screen,
select a language.
4Select an input signal by using the
INPUT button on the remote control.
Focus and Position of the
Screen Image
When an image appears on the screen,
check if it is in focus and fits the screen
properly.

Focus ring
yyTo adjust the focus of the image,
rotate the focus ring.
Watching Projector
1 In Standby mode, press the POWER
button to turn the projector on.
2Press the INPUT button and select
the input signal you want.
3Control the projector using the fol-
lowing buttons while watching projector.
Button
VOL -, +
MUTE
Description
Adjusts the volume level.
Mutes all sounds.
Q.MENU
Accesses the quick menu.
(see page22)
RATIO
Resizes an image.
KEY.S, Adjusts Keystone. (see
page21)
4To turn the projector off, press the
POWER button.
20
Using the PROJECTOR
Using Additional Options
-
Adjusting Aspect Ratio
Resize an image to view at its optional
size by pressing RATIO while you are
using the projector.
-
Set By Program: Displays images in
the same aspect ratio as the original
image.
4:3: Resizes images to the 4:3
aspect ratio.
NOTE
yySome options may not be available
depending on input signals.
yyYou can also change the image size
by pressing Q.MENU or SETTINGS.
-
-
-
FULL: Changes to the full screen
regardless of the aspect ratio.
16:9: Resizes images to fit the
screen width.
Just Scan: Displays video images in
the original size without cutting off
the edges.
NOTE
yyIf you select Just Scan, you may see
image noises at the edge or edges
of the screen.
- Zoom: Enlarges an image to fit the
screen width. The top and bottom of
the image may be truncated.
yyPress the ︿ or ﹀ button to zoom in
or out of the image.
yyPress the ︿ or ﹀ button to move
the image.
- Cinema Zoom: Formats an image to
the cinemascope ratio, 2.35:1.
It ranges from 1 to 16.
yyPress the ︿ or ﹀ button to zoom in
or out of the image.
yyPress the ︿ or ﹀ button to move
the image.
NOTE
yyIf you enlarge or reduce an image,
the image may be distorted.
21
Using the PROJECTOR
Using the Keystone
Function
Using the Input List
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set at a right angle
to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
•Keystone 0 ◀

-
Using the Input List
1 Press the INPUT button to access
the input sources.
- The connected input mode appears
first. However, AV / Component
input is always activated.
INPUT
AV
ꔂ Move ꔉ OK
Component
USB
RGB-PC
HDMI
WiDi
+ ▶
Input Label
ꔉ OK
1 Press the KEY.S ▲ or KEY.S ▼button
to adjust the screen.
yyKeystone can be adjusted from
-40 to 40.
2Press the OK button after adjustment.
ꕯ
Exit
2Select an input signal using the INPUT
button and the projector is switched
only to the connected input mode. You
can use the ︿, ﹀, ︿ or ﹀ button to
switch between all the input modes.
Adding an Input Label
Displays which devices are connected to
which input ports.
Input Label
◀
▶
Component ◀
▶
RGB-PC
◀
▶
HDMI
◀
▶
AV
Close

1 Press the INPUT button to access
the input sources.
2Press the BLUE button.
3Use the ︿ or ﹀ button to scroll to
one of the input sources.
4Use the ︿ or ﹀ button to select one
of the input labels.
22
Using the PROJECTOR
Blank Function
Using the Blank Function
This function may be effective when you
need to draw attention during a meeting
or training.
1 Press the BLANK button, and the
screen is covered by the background
color.
You can change the background
color by referring to "Selecting a
Blank Image".
2Press any button to clear the blank
function.
To cover the screen temporarily, press
the BLANK button on the remote
control.
Do not block the lens with any object
while the projector is running.
It may become overheated and deformed or even cause a fire.
Selecting a Blank Image
1 Press the SETTINGS button.
2Press the ︿, ﹀, ︿ or ﹀ button to
select OPTION and press the OK
button.
3Press the ︿, ﹀, ︿ or ﹀ button to
select Blank Image and press the
OK button.
4Use the ︿, ﹀ button to move to the
setting or option you want and press
the OK button.
Using the Quick Menu
You can customize frequently used
menus.
1 Press Q.MENU to access the quick
menus.
2Press the ︿ or ﹀ button to scroll
through the following menus and
press OK.
Menu
Aspect
Ratio
Picture
Mode
Energy
Saving
Clear
Voice II
Sound
Mode
Sleep
Timer
PJT Mode
Description
Resizes an image.
(see page20)
Changes the picture
mode. (see page45)
Adjusts brightness.
USB
Device
Disconnects a USB
device.
The menu is displayed
only when the USB device
is connected.
Makes the voice from the
projector crisp and clear.
Set each option as desired.
The projector is turned off
at the preset time.
Turns the projected image
upside down or flips it
horizontally.
3Press the ︿, ﹀, ︿, or ﹀ button to
scroll through the following menus.
ENTERTAINMENT
23
ENTERTAINMENT
Using WiDi
Connecting to WiDi
WiDi refers to Intel's Wireless Display technology.
If you have a notebook that supports Intel WiDi, you can use the projector as an eternal
monitor without using a video cable.
WiDI requires a strong signal. If you experience interference, use the use the
USB Extension Cable provided with the Wi-Fi dongle.
Or
USB Extension
Cable
Wi-Fi dongle
Wi-Fi dongle
NOTE
yy Do not remove the wireless dongle during WiDi operations.
yy The picture above may look different from the actual product.
yy An image from a PC may look different when projected on the screen.
24
ENTERTAINMENT
WiDi (Wireless Display) Setup
1 Set the external input of the projector to WiDi.
2 Run the WiDi( ) program on your notebook.
3After running the WiDi program on your notebook, a list will show all available devices
that were detected. In the list, select the Projector you want and click Connect.
Enter the 4 - digit number shown(a) on the screen (b) and then click Continue.
1SPQFSUJFT
1SPQFSUJFT
)FMQ
)FMQ
'PVGTUGEWTKV[EQFG
$POOFDUFEBEBQUFS
z›ˆ›œšaGu–Gˆ‹ˆ—›Œ™GŠ–••ŒŠ›Œ‹U
%FUFDUFEBEBQUFST
{ —ŒGGGGGGGGGGuˆ”ŒGGGGGGGGGGGGGGGG GGGGGGGGGGGGGGGGGGGGGGpkGGGGGGGGGGGGt–‹Œ“GGGGGGGGGGGGGGGGGGGGGGGGGGGGGzŽ•ˆ“
G
snG~kGw™–‘ŒŠ›–™
km^Y
uŒ›jˆš›GZUW

[Intel Notebook] Request connection
To connect, enter the PIN
My PIN****
a
Remain: 92 second(s)
7KLVLVWKHILUVWWLPH\RXĜUHFRQQHFWLQJWR/*:L'L3URMHFWRU
3OHDVHHQWHUWKHGLJLWVHFXULW\FRGH\RXVHHRQ\RXU3URMHFWRUVFUHHQ
b
Cancel
&RQWLQXH
&DQFHO
,QGLFDWHVDQDGDSWHU\RXKDYHSUHYLRXVO\FRQQHFWHGWR
zŠˆ•G–™Gˆˆ“ˆ‰“ŒGˆ‹ˆ—›Œ™š
&RQQHFW
Projector Screen
Notebook Screen
4The Notebook screen will appear on the projector screen soon. Note that the wireless
connection speed will affect the quality of the video displayed on the notebook.
If the connection is poor, the intel WiDi connection may be lost or quality of the
video may be poor.
* For more information on Intel WiDi, visit http://intel.com/go/widi
* Only the Input, OK, Volume, and Mute buttons on the remote control are available in
WiDi mode.
* The M (Menu) button on the Control Panel of the projector is used as the external
input button during WiDi operation.
* If you change the input signal while watching in WiDi mode, the WiDi connection will
be disabled.
* The WiDi function can be used only on Intel-based Windows 7 laptops with WiDi
Application 3.0.xx or earlier installed.
ENTERTAINMENT
MY MEDIA
Connecting USB Storage
Devices
Connect a USB flash drive as shown
below.
When a USB storage device is connected, the USB adjustment screen appears.
You cannot write or delete data on the
USB storage device.

USB flash drive
25
To disconnect the USB storage device,
1 Press the Q.MENU button.
2Use the ︿ or ﹀ button to move to
USB Device and press the OK
button.
3Remove the USB device.
NOTE
yyAfter the USB storage device is
disconnected, it cannot be read.
Remove the USB storage device
and connect it again.
26
ENTERTAINMENT
Tips for Using USB Devices
yyOnly a USB storage device is recognizable.
yyUSB hubs are not supported.
yyA USB storage device which uses its
own driver may not be recognized.
yyThe recognition speed of a USB
storage device will depend on each
device.
yyIf a normal USB device does not
work, disconnect and reconnect it.
Please do not turn off the projector
or unplug the USB device when the
connected USB device is working.
The USB device or stored files may
be damaged.
yyPlease do not connect the USB
storage device that has been
manipulated on the PC.
The projector may not operate
properly or fail to play files. Use a
USB storage device which contains
normal music, photo, video, or
document files.
yyPlease only use a USB storage device
formatted as a FAT16, FAT32, or
NTFS file system provided by Windows.
In case a storage device formatted
as a different utility program is not
supported by Windows, it may not be
recognized.
yyPlease connect power to a USB
storage device which requires an
external power supply. If not, the device may not be recognized.
yyPlease connect a USB storage device
with a cable provided by the USB
manufacturer. When you use a cable
that is not provided by a USB manufacturer or an excessively long cable,
the device may not be recognized.
yySome USB devices may not be supported or will not work properly.
yyIf the length of a folder or file is too
long, the folder or file may not be
recognized properly.
yyThe files in a USB storage device are
sorted in the same way as Windows
XP. Up to 100 English characters for
a file name are allowed.
yyThe data of a USB device may be
damaged, so it is recommended to
backup any important files. Because
a user is responsible for data management, the manufacturer is not
responsible.
yyIt is recommended to use a USB
flash drive which is 32 GB or less
and a USB hard disk which is 1 TB or
less. Any device with more than the
recommended capacity may not work
properly.
yyIf a USB storage device is not working
properly, disconnect it and connect it
again.
yyIf a USB external hard disk with the
power saving function does not work,
turn the hard disk off and on again to
make it work properly.
yyUSB storage devices below USB 2.0
are supported as well. However, they
may not work properly in the movie
list.
ENTERTAINMENT
27
MOVIE LIST
In the Movie List, you can watch movies stored on the connected USB device.
Tips for Playing Video Files
yySome subtitles created by a user may
not work.
yySome special characters are not supported in subtitles.
yyHTML tags are not supported in subtitles.
yyTime information in a subtitle file
should be arranged in ascending
order to play the subtitle properly.
yyChanging font and color in subtitles
is not supported.
yyA language which is not specified
in the subtitle languages is not
supported. (see page31)
yySubtitle files of 1 MB or larger are not
supported.
yyThe screen may suffer temporary
interruptions (image stoppage, faster
playback, etc.) when the audio language is changed.
yyA damaged video file may not be
played properly, or some functions
may not be available.
yyVideo files created with some encoders may not be played properly.
yyEither audio or video may only be
supported depending on the video or
audio packet structure of a video file.
yyVideo files with higher resolution than
the maximum supported for each
frame may not be played properly.
yyVideo files in formats other than the
ones specified above may not be
played properly.
yyStreaming files which include GMC
(Global Motion Compensation) or
Qpel (Quarterpel Motion Estimation)
is not supported.
yyUp to 10,000 sync blocks are supported in the subtitle file.
yySeamless playback is not guaranteed
for files encoded level 4.1 or higher in
H.264/AVC.
yyDTS audio codec is not supported.
yyVideo files larger than 30 GB (Gigabytes) are not supported.
yyPlaying a video via a USB connection
that does not support high speed
may not work properly.
yyA video file and its subtitle file must
be located in the same folder. A video
file name and its subtitle file name
must be identical in order to display
the subtitle properly.
yyWhile watching a video using the
movie list function, you cannot adjust
the picture mode.
yyTrick Mode does not support other
functions than ꕙ if video files do not
have index information.
yyWhen playing a video file using network, the Trick mode is limited to 2X
speed.
yyVideo file names that contain special
characters may not be playable.
28
ENTERTAINMENT
Supported Video Formats
File
Extensions
Audio/
Video
Codec
VC-1 Advanced Profile
.asf
.wmv
Video
Audio
VC-1 Simple
and Main Profiles
Profile/Level Support
Advanced Profile @ Level 3 (e.g.720p60, 1080i60, 1080p30)
Only streams compliant to SMPTE 421M VC-1 standard are supported.
Simple Profile @ Medium Level (e.g.CIF, QVGA)
Main Profile @ High Level (e.g.1080p30)
Only streams compliant to SMPTE 421M VC-1 standard are supported.
WMA Standard
WMA 9 Professional
DivX3.11
Video
.divx
.avi
DivX4
DivX5
DivX6
Advanced Simple Profile(720p/ 1080i)
XViD
Advanced Simple Profile(720p/ 1080i)
MPEG-1 Layer I,II
MPEG-1 Layer III (MP3)
Audio
Dolby Digital
WMA Standard
WMA 9 Professional
DTS
.mp4
.m4v
Video
MPEG-4 Part 2
Audio
HE-AAC
Video
H.264 /AVC
Audio
Dolby Digital
DTS
HE-AAC
.mkv
Video
.ts
.trp
.tp
H.264 /AVC
MPEG-2
Korea only
Main Profile @Level 4.1
High Profile @Level 4.1 (e.g.720p60, 1080i60, 1080p30)
Advanced Simple Profile(720p/ 1080i)
HE-AAC-LC and HE-AAC
Main Profile @Level 4.1
High Profile @Level 4.1 (e.g.720p60, 1080i60, 1080p30)
HE-AAC-LC and HE-AAC
Korea only
Main Profile @Level 4.1
High Profile @Level 4.1 (e.g.720p60, 1080i60, 1080p30)
Main Profile @High Level (e.g.720p60, 1080i60)
MPEG-1 Layer I,II
Audio
MPEG-1 Layer III (MP3)
Video
Dolby Digital
HE-AAC
MPEG-1
MPEG-2
Dolby Digital
LPCM
MPEG-1 Layer I,II
MPEG-1
Audio
MPEG-1 Layer I,II
Video
.vob
Audio
.mpg
.mpeg
.mpe
H.264 /AVC
HE-AAC-LC and HE-AAC
Main Profile @High Level (e.g.720p60, 1080i60)
Only streams compliant configured properly for TS, PS or ES
ENTERTAINMENT
Supported Audio Files
No
Audio Codec
Bit rate
Sampling rate
1
MP3
32 kbps - 320 kbps
32 kHz - 48 kHz
2
AC3
32 kbps - 640 kbps
32 kHz, 44.1 kHz, 48 kHz
3
MPEG
32 kbps - 448 kbps
32 kHz - 48 kHz
4
AAC,HEAAC
24 kbps - 3844 kbps
8 kHz - 96 kHz
5
CDDA
1.44 kbps
44.1 kHz
6
LPCM
1.41 Mbps - 9.6 Mbps
Multi-channel : 44.1 kHz, 88.2 kHz
/ 48 kHz, 96 kHz
Stereo : 176.4 kHz, 192 kHz
Remark
DTS Audio codec is Korea only.
29
30
ENTERTAINMENT
5Control playback by using the follow-
Browsing Movie List
Play a video file stored in the connected
device.
1 Connect a USB storage device.
2Press the USB button.
3Use the ︿, ﹀, ︿ or ﹀ button to
�
select Movie List and press the OK
button.
4Use the ︿, ﹀, ︿ or ﹀ button to
select the file you want and press the
OK button.
❶
❷
Movie List
USB STORAGE DEVICE
d
❺
❸ ❹
Page 1/1
book
doc
pic
꘧ Page Change
vid
Page 1/1
Butterfly_...
01:34:33
ꔅ Go to root folder
ꔅ Go to upper folder
❻
❼
ing buttons.
Exit
❽
Description
❶ Thumbnails
Abnormal file
File not supported
01:02:30 / 02:30:25
Q.MENU
Option
Hide
Exit
Setting
Description
◀▶ Shows the current playing
position. Use <, > buttons to
move forward or backward.
ꕗ
Stops playing and returns to
Movie List.
ꕖ
Returns to normal playback.
ꕘ
Pauses the media player.
If no button is pressed on the
remote control for 10 minutes
after pausing, the playback is
restarted.
ꕘ ꕙ Displays in slow motion.
ꕎ Whenever this button is
pressed, the playback speed
is changed.
: x2, x4, x8, x16, x32
Option A pop-up window will appear.
Hide
❷ File List
❸ Moves to the upper level folder.
❹ Current page/Total no. of folder
pages
❺ Current page/Total no. of file
pages
❻ Moves to the top level folder.
❼ Moves to the upper level folder.
❽ Exit Movie List.
��
Exit
Hides the playback bar. Press
the OK button to make it
appear.
Returns to the Movie List
screen.
ENTERTAINMENT
Options for Movie List
1 Press the Q.MENU button.
2Use the ︿ or ﹀ button to move to a
desired option and press the
OK button.
Setting
Subtitle
Language
Description
yySpeed: If a subtitle is
not synchronized with its
video, you can adjust its
speed at 0.5 sec unit.
yyPosition: Moves the location of a subtitle.
yySize: Changes the subtitle font size.
Repeat
Turns the repeat function on
or off.
When it is set to off, the next
file can be played sequentially
if the file name is similar.
3 Use ︿, ﹀, ︿ or ﹀ button to set up
each item.
Set Video Play
Setting
Description
Picture Selects the size of a playback
Size
screen.
yyFull: Files are played in
full screen mode according to the aspect ratio of
video.
yy16:9: Displays the video
with the aspect ratio of
16:9.
yyJust Scan: Displays the
video in the original aspect ratio.
Audio
Language
Subtitle
Language
Allows you to select the language you want for the file
with multiple audio tracks.
This option is not available
if the file has only one audio
track.
The subtitle can be turned
on or off.
yyLanguage: One of any of
the available languages
can be selected.
yyCode Page: A character set
used for a subtitle can be
selected.
By default, the subtitle is
displayed in a language
configured in OPTION →
Menu Language.
31
yySubtitle Language
Subtitle
LanLanguage
guage
Latin1
English, Spanish, French,
German, Italian, Swedish,
Finnish, Dutch, Portuguese,
Danish, Romanian,
Norwegian, Albanian,
Gaelic, Welsh, Irish, Catalan,
Valencian
Latin2
Bosnian, Polish, Croatian,
Czech, Slovak, Slovenian,
Serbian, Hungarian
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian,
Russian, Ukranian, Kazakh
Greek
Greek
Turkish Turkish
Hebrew Modern Hebrew
Chinese Simplified Chinese
Korean Korean
Arabic
Arabic
32
ENTERTAINMENT
PICTURE Settings
You can change video settings.
(Refer to "PICTURE Settings" on page
45.)
AUDIO Settings
You can change audio settings.
(Refer to "AUDIO Settings" on page 48.)
Registering the DivX code
Please check your DivX code. For more
information on the registration process,
visit www.divx.com/vod. After registration, your can enjoy DivX VOD content
protected by the DivX DRM code.
1 In the Home menu, move to OPTION
and press DivX(R) VOD.
Registration
Deregistration
To deregister the DivX code
Use the DivX deregistration code to
deactivate the DivX DRM function.
1 In the Home menu, move to OPTION
and press DivX(R) VOD.
2Use the ︿ or ﹀ button to go to
Deregistration and press the
OK button.
Your device is already registered.
Are you sure you wish to deregister?
Yes
No
⬇
i Deregistration code:********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
Close
2Press the ︿ or ﹀ button to move to
Registration and press the OK button.
i
You must register your device
to play DivX(R) protected videos.
Registration Code: XXXXXXXXXX
Register at http://vod.divx.com
Close
3Check the DivX registration code.
NOTE
yyYou cannot use DivX registration
codes assigned to other devices.
Make sure to use the DivX registration code assigned to your device.
yyThe video or audio files that are
not converted by the standard DivX
codec may be corrupted or not be
played.
3Select Yes.
NOTE
yyWhat is DRM
[Digital Rights Management]?
This is a technology and service that
prevents the illegal use of digital
contents to protect the benefits and
rights of the copyright owner. Files
can be played after the license is verified through an online method, etc.
33
ENTERTAINMENT
PHOTO LIST
❶
You can see the photos stored on a connected device.
Supported Photo Files
PHOTO (*.JPEG)
Baseline: 64-pixel (width) x 64-pixel
(height) - 15360-pixel (width) x
8640-pixel (height)
Progressive: 64-pixel (width) x 64-pixel
(height) - 1920-pixel (width) x 1440pixel (height)
yyOnly JPEG files are supported.
yyNon-supported files are displayed in
the form of an icon.
yyAn error message is displayed for
corrupted files or file formats that
cannot be played.
yyCorrupted files may not be displayed
properly.
yyIt may take some time to view highresolution images in full screen.
Browsing Photo List
1 Connect a USB storage device.
2Press the USB button.
3Use the ︿, ﹀, ︿ or ﹀ button to
select Photo List and press the OK
button.
4Use the ︿, ﹀, ︿ or ﹀ button to
select the file you want and press the
OK button.



❷
❸
Page 1/1
Photo List
USB STORAGE DEVICE
d
book
doc
pic
❺
❹
꘧ Page Change
vid
Page 1/1
Butterfly_...
01:34:33
ꔅ Go to root folder
ꔅ Go to upper folder
❻
❼
Exit
❽
Description
❶ Thumbnails
Abnormal file
File not supported
❷ File List
❸ Moves to the upper level folder.
❹ Current page/Total no. of folder
pages
❺ Current page/Total no. of file
pages
❻ Moves to the top level folder.
❼ Moves to the upper level folder.
❽ Exit
34
ENTERTAINMENT
5 Control playback by using the following buttons.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
[1/4]
Setting
Description
Hide
Hides the menu on the full
size screen.
yyTo see the menu, press
the OK button on the
remote control.
Exit
Slideshow
BGM
Setting
Slideshow
ꔦ
Q.MENU
Option
Hide
Exit
Description
Selects the previous or next
photo.
All photos are displayed
during slide show.
yySet the time interval of
the slide show in Option
→ Set Photo View menu.
BGM
You can listen to music while
viewing photos in full size.
yySet the BGM in Option
→ Set Photo View menu.
�
Rotates photos.
yyRotates a photo 90°,
180°, 270°, 360°
clockwise.
yyPhotos cannot be rotated
if their width is greater
than the height of the
max. supported resolution.
ꔦ
Views the photo in full mode
or original mode.
Press the blue button to
enlarge the image.
You can use the Energy
Saving mode.
A pop-up window will appear.
Option
Exit from full screen photo
view.
35
ENTERTAINMENT
Options for Photo List
1 Press the Q.MENU button.
2Use the ︿ or ﹀ button to move to a
MUSIC LIST
You can play audio files stored on the
connected device.
desired option and press the OK button.
3 Use ︿, ﹀, ︿ or ﹀ button to set up
each item.
Set Photo View
Setting
Description
Slide
Selects a slideshow speed.
speed
BGM
Selects a music folder for
(Backthe background music.
yyYou cannot change the
ground
music folder while the
Music)
background music is
playing.
yyFor background music,
only the folder from the
same device can be selected.
PICTURE Settings
You can change video settings.
(Refer to "PICTURE Settings" on page
45.)

Supported Music Files
*.MP3
Bit rate range 32 Kbps - 320 Kbps
yySampling rate MPEG 1 Layer 3:
32 kHz, 44.1 kHz, 48 kHz
yySampling rate MPEG 2 Layer 3:
16 kHz, 22.05 kHz, 24 kHz
Browsing Music List
1 Connect a USB storage device.
2Press the USB button.
3Use the ︿, ﹀, ︿, ﹀ button to select
Music List and press the OK button.
4Use the ︿, ﹀, ︿ or ﹀ button to
select the file you want and press the
OK button.


❶
❷
❸
Music List
USB STORAGE DEVICE
d
❺
❹
Page 1/1
꘧ Page Change
Drive1
Page 1/1
Butterfly_...
01:34:33
AUDIO Settings
You can change audio settings.
(Refer to "AUDIO Settings" on page 48.)
ꔅ Go to root folder
ꔅ Go to upper folder
❻
❼
Exit
❽
36
ENTERTAINMENT
Description
❶ Thumbnails
Abnormal file
Setting
Description
Hide Hides the playback bar.
yyPress the OK button to
make the playback bar
appear.
Exit
File not supported
❷ File List
❸ Moves to the upper level folder.
❹ Current page/Total no. of folder
pages
❺ Current page/Total no. of file
pages
❻ Moves to the top level folder.
❼ Moves to the upper level folder.
❽ Exit
5 Control playback by using the following buttons.

Page 1/1
Music List
USB STORAGE DEVICE
d
Drive1
�
Page 1/1
��
Q.MENU
02:30 / 03:25
Option
Hide
Exit
Setting
Description
Changes
the playing position.
◀▶
ꕗ
Stops playing.
ꕖ
Returns to normal playback.
ꕘ
Pauses the media player.
ꕎ
Options for Music List
1 Press the Q.MENU button.
2Use the ︿ or ﹀ button to move to a
desired option and press the OK button.
3 Use ︿, ﹀, ︿ or ﹀ button to set up
each item.
Set Audio Play
Setting
Description
Repeat Selects repeat play.
Random Selects random play.
꘧ Page Change
Butterfly_...
01:34:33
002. - B02.mp3
Returns to the Music List
screen.
Plays the previous/next file.
You can use the Energy Saving mode.
Option Sets up the options of Music
List.
AUDIO Settings
You can change audio settings.
(Refer to "AUDIO Settings" on page 48.)
37
ENTERTAINMENT
FILE LIST
You can see document files stored on a
connected device.

❶
Supported File Formats
XLS, DOC, PPT, TXT, XLSX, PPTX,
DOCX, PDF,
Microsoft Office
97/ 2000/ 2002/ 2003/ 2007
Adobe PDF 1.0/ 1.1/ 1.2/ 1.3/ 1.4
yyFile Viewer realigns a document, so
it may look different from what is
displayed on a PC.
yyFor documents that include images,
the resolution may look lower during
the realigning process.
yyIf the document volume is big or it
has many pages, it may take longer
to load the document.
yyUnsupported fonts may be replaced
by other fonts.
yyThe file viewer may not open for
Office documents that contain many
high resolution images. In that case,
reduce the image file size, save it on
a USB storage device and run the
file viewer again or connect your PC
to the projector and open the file on
your PC.
Browsing File List
1 Connect a USB storage device.
2Press the USB button.
3Use the ︿, ﹀, ︿ or ﹀ button to
select File List and press the OK
button.
4Use the ︿, ﹀, ︿ or ﹀ button to
select the file you want and press the
OK button.
❷
Page 1/1
File List
USB STORAGE DEVICE
d
DOC
PPT
HWP
Butterfly_...
01:34:33
TXT
❹
❸
꘧ Page Change
Drive1
Page 1/1
PDF
XLS
ꔅ Go to root folder
ꔅ Go to upper folder
❺
❻
Exit
❼
Description
❶ File List
❷ Moves to the upper level folder.
❸ Current page/Total no. of folder
pages
❹ Current page/Total no. of file
pages
❺ Moves to the top level folder.
❻ Moves to the upper level folder.
❼ Exit
38
ENTERTAINMENT
5Control playback by using the following buttons.
yyClick Go Page then the pop-up
window for selecting the number of
page appears.
yyInput the page to move to the page
you want.
yyPress the volume button to zoom in
or zoom out.
1. Press OK.
2. P
ress the Up/Down/Left/Right
buttons to move to Go Page or
Zoom.
Go Page
ꔦ Zoom
Q.MENU
Option
Hide
Exit
Setting
Description
Go
Moves to the page you want.
Page Use the Up/Down/Left/Right
buttons to select a page and
press the OK button.
Zoom Views the photo in full mode
or original mode.
Option Sets up the options of File
Viewer.
Hide Hides the menu.
yyPress the OK button to
make it appear.
Exit
Returns to the File Viewer
screen.
Set FileViewer Option
Setting
Single
Page
Loading
Description
Loads and displays
pages one by one.
The initial loading
time is short but a
content-heavy page
may be displayed
slowly.
Off Loads all pages of a
file to memory before
it starts to display
them. The initial
loading time is long
but you can navigate
pages quickly after
loading is complete.
If a file is too large, it
may fail to load all the
pages.
Image You can set the quality of
QuaIity the image included in the
document. The following
three options are available
for the image quality: High,
Medium, Low. Higher the
image quality, lower the
display time.
Document Selects initial document
Align
align method.
On
File View settings are default, so close
the currently opened document to apply
changes to the new document, if any.
3D FUNCTION
39
3D FUNCTION
3D technology uses different video frames for each eye to add depth to the video.
Before Watching 3D
While Watching 3D
WARNING
yyIf you view 3D images too closely for
a long period of time, it may cause
blurred vision.
yyIf you watch the projector or game
screen for a long time with 3D glasses on, you may experience dizziness
or eye fatigue.
yyIf you are pregnant, a senior citizen,
intoxicated, have heart problems, or
easily feel motion sickness, we recommend that you do not watch 3D
images.
yyBecause 3D images can be recognized as real, some viewers may get
surprised or overexcited.
yyDo not watch 3D images near fragile
objects or any objects that can be
knocked over easily.
yyTake care not to injure yourself as you
may subconsciously try to move away
from the life-like 3D images.
yyPrevent children of 5 years or younger from watching a 3D video. It may
impair the development of their eyes.
yyWarning about photosensitivity seizures
- Some users may experience a
seizure or other abnormal symptoms
when they are exposed to a flashing light or particular pattern from
a video game or movie. If anyone in
your family has a history of epilepsy
or has ever experienced any kind of
seizure, please consult your doctor
before viewing 3D images.
If you experience one of the following
symptoms while watching a 3D video,
stop watching the 3D video immediately and take a rest.
- Dizziness, twitching of the eye or
facial muscles, involuntary movements, cramp, loss of consciousness,
confusion, loss of sense of direction,
or nausea. If the symptom does not
disappear, please consult your doctor.
yyYou can reduce the risk of photosensitive seizures by taking the following
preventive measures.
- Take a rest of 5 - 15 mins. for every
1 hour of viewing.
- If vision varies between each eye,
correct the variation before beginning
to watch a 3D video.
- Ensure that the 3D video is directly
in front of you, at eye level.
- You should stop watching if you
experience a headache, fatigue or
dizziness.
- Do not view 3D images when you
are tired or ill.
40
3D FUNCTION
CAUTION
yyExtra special care is required for children watching a 3D video.
When Watching 3D Video
yyWatch 3D images within the optimum
viewing angle and distance.
yyIf you are outside the viewing angle
or distance, you may not be able to
watch 3D images. You cannot view
3D images when you lie down.
yyYou may see left and right images
overlapped during projector initialization after it is powered on. It may take
some time for optimization.
yyIt may take some time for the 3D
image look normal after you turn your
eyes away from the screen and look
back at the 3D image.
yyIt may flicker slightly while watching
3D images under a 3 wavelength
lamp fluorescent light (50 Hz 60 Hz) or near windows. If so, it is
recommended to block the sun light
with a curtain and to dim the lights.
yyThe 3D glasses must be DLP-LINK
(DLP Ready) type.
yyYou may not be able to watch 3D
properly if there is an obstacle
between the projector and 3D glasses.
yyInstall the 3D projector as far as possible from other devices.
Please check the following when using
3D glasses.
yyDo not use 3D glasses as ordinary
glasses, sunglasses or protective
goggles.
- If you do so, this may cause injury.
yyDo not store 3D glasses in very hot
or very cold conditions. If you do, this
may cause them to become distorted. Do not use distorted glasses.
yyDo not drop 3D glasses or allow them
to come into contact with other objects.
- This can result in damage to the
product.
yyThe lenses of 3D glasses are easily scratched. Use a soft clean cloth
when cleaning them.
- Foreign particles on the cloth may
cause scratches.
yyDo not scratch the surface of the 3D
glasses' lenses with sharp objects or
wipe them with chemicals.
- If the lenses get scratched, images
may not look normal when viewing
3D.
yyPlease use 3D glasses certified by LG
Electronics.
3D FUNCTION
41
Requirements for Watching 3D Images
*O
ptimum viewing angle: Top/Bottom/Left/Right 9°
Optimum viewing distance: Between 3 m and 5 m
Recommended screen size: 101 cm
* Basically, Watching 3D videos should be done in dark room environments only.
* For 3D watching, set the energy saving mode to Minimum.
NOTE
yyThe pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen.
Therefore, the pairing with DLP-LINK glasses may not work properly if the light reflected from
the screen is not bright enough, such as when the surrounding area is bright, the screen is
big, or the maximum energy saving mode is enabled.
yySome menus may not work while playing a 3D video.
yyYou can only watch a 3D video properly when the 3D video format option has been selected
on the projector.
42
3D FUNCTION
1 Please check the minimum system requirements for your computer. Minimum requirements are as follows:
Microsoft® Windows® XP, Vista 32/ 64 bit ,Windows 7 32/ 64 bit
Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higher
More than 1 GB of system memory (2 GB recommended)
Free space of 100 MB or more
DirectX 9 or higher
Video card should support 120 vertical frequency (Hz).
Recommended video card requirements
- Graphic Processor speed 700 MHz higher
- Memory 512 MB higher
yyA laptop equipped with the chipsets above can be used but it may not work properly.
2Set the video output to XGA 120 Hz and play a video file using a video player that
supports 3D output.
The following video players support 3D output: Stereoscopic Player, nVidia 3D
Vision, and TriDef 3D.
For more information on the players above, please visit their websites at:
www.3dtv.com
www.nvidia.co.kr
www.tridef.com
3D FUNCTION
43
To Use DLP-LINK (DLP-Ready) Type Glasses
1 While watching 3D images from the projector, press buttons on the glasses.
2When you press the button, the glasses flicker to be synchronized with the 3D images.
(The flickering is a unique operation method of DLP-LINK type glasses. It may be
different depending on the glasses type.)
3If the glasses flicker or problems occur while watching 3D, first turn the lights off to
make the room darker. Contact your projector seller for queries about the glasses.
Supported 3D input formats
Input
Signal
Resolution
Vertical
Frequency (Hz)
Supported 3D Formats
HDMI
XGA
1024 x 768
120
Frame Sequential / Frame Alternative
RGB-PC
XGA
1024 x 768
120
Frame Sequential / Frame Alternative
yyThe resolution supporting 3D mode is 1024 x 768 for HDMI and RGB input.
yySome menus may not work in 120 Hz input.
Watching 3D Images
1 Play supported 3D video titles.
2For RGB-PC, you must press “AUTO" on the remote control before watching 3D.
Press the 3D button.
3
While watching 3D images from the projector, press buttons on the glasses.
4
5Press the L/R button to switch the playing direction of an image. Select a screen
with better 3D display quality.
yyIf you press the 3D button during viewing, it returns to 2D.
6If a 2D image is displayed on the 16:9 screen, a 3D image is also displayed at the
aspect ratio of 16:9. For ratios other than 16:9, a 3D image is displayed in 4:3.
yyYou cannot change the screen size for 3D images.
44
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
SETUP Menu
1 Press the SETTINGS button.
2Use the ︿, ﹀, ︿ or ﹀ button to select a desired item and press the OK button.
3 Use the ︿, ﹀, ︿ or ﹀ button to set up a desired item and press the OK button.
4When you are finished, press EXITꕯ.
Menu
Description
PICTURE
Adjusts the image quality for optimal viewing.
AUDIO
Adjusts the sound quality and volume level.
TIME
Time-related features.
OPTION
Customizes the general settings.
INPUT
Selects the desired input source.
MY MEDIA
Accesses photo, music, movie, and document files.
45
CUSTOMIZING SETTINGS
PICTURE Settings
1 Press the SETTINGS button.
2Use the ︿, ﹀, ︿ or ﹀ button to select PICTURE
and press the OK button.
3Use the ︿, ﹀, ︿ or ﹀ button to set up a desired
item and press the OK button.
-T
o return to the previous menu, press the ꕣ
button.
4When you are finished, press EXITꕯ.
PICTURE
ꔂ Move ꔉ OK
• Energy Saving : Medium
• Picture Mode : Standard
• Contrast
50
• Brightness
50
• Sharpness 5
• Color
70
• Tint
0
R
G
• Advanced Control
• Picture Reset
The available picture settings are described as follows.
Setting
Energy
Saving
Picture
Mode
Description
Reduces the power consumption by adjusting the screen brightness.
Selects one of the preset images or customizes options in each mode
for the best screen performance.
You are also able to customize advanced options of each mode.
Mode
Vivid
Standard
Cinema
Sport
Game
Maximizes the visual effect of video. Displays a crystal clear
picture by enhancing contrast, brightness, and sharpness.
Has the contrast, brightness and sharpness at normal levels.
Optimizes the image for movie.
Optimizes the image for sports by emphasizing primary
colors and dynamic actions.
Optimizes the image for playing games on fast-moving
screens.
Expert
Adjusts the detailed image settings.
Contrast
Increases or decreases the gradient of the video signal.
Brightness Adjusts the base level of the video signal to make the image brighter or
darker.
Sharpness Adjusts the level of sharpness in the edge between the light and dark
areas of the picture. The lower the level is, the softer the image looks.
Color
Adjusts the intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Advanced Customizes the advanced settings.
Control
46
CUSTOMIZING SETTINGS
Setting
Picture
Reset
Aspect
Ratio
Picture
Wizard II
Screen
(RGB-PC)
Description
Restores the options of each mode to the factory default.
Changed the image size to view images at its optimal size. (see
������������
page20)
By following the instructions, using the remote control, you can easily adjust the picture quality to technical standards without needing an
expensive pattern device or a picture quality expert.
Adjusts the picture quality of RGB-PC input.
Option
Resolution Available resolutions are 768 resolution
Auto
Config.
Position
Size
Phase
Reset
(1024 x 768/ 1280 x 768/ 1360 x 768, 60 Hz) and
1050 resolution (1400 x 1050/ 1680 x 1050, 60 Hz).
Provides optimized picture quality by automatically calibrating the mismatch of horizontal width and picture shake
caused by clashes between the internal settings of the projector and various PC graphic signals.
yyYou can also use the AUTO button on the remote control.
Moves the image up/down/left/right.
Changes the screen size.
Makes the picture look clear by removing horizontal noise.
Restores all the settings to the factory default.
Advanced Control
Setting
Description
Dynamic Contrast
Dynamic Color
Clear White
Skin Color
Adjusts the contrast to keep it at the best level according to the
brightness of the screen.
Adjusts screen colors so that they look natural.
Makes the white area of screen look brighter and whiter.
Detects the skin area of image and adjusts it to render a natural skin
color.
Reduces image noise.
Noise Reduction
Digital Noise
Reduction
Gamma
Black Level
This option reduces the noise produced while creating digital video
signals.
Sets a gradation curve between video input and output signal.
Compensates the brightness and contrast of a screen to balance
with the black level of the video input.
Not available for RGB-PC.
CUSTOMIZING SETTINGS
Setting
47
Description
Real Cinema
Color Gamut
Provides the optimal picture quality for watching a movie.
Selects the range of colors to display.
yyStandard: Displays the original colors of an input signal regardless
of the display features.
yyWide: Sets to use the rich colors of the display.
Edge
Enhancer
Color Filter
Provides much sharper and clearer edges to the picture.
Accurately adjusts color and tint by filtering a specific color area of
RGB space.
White Peaking Adjust white color brightness. White peaking can be adjusted from 0
to 10. Adjust to higher setting to achieve brighter picture. Adjust to
lower setting for darker picture.
Color TemAdjusts the overall color of the screen to suit your preference.
Select Warm, Cool or Medium.
perature
In Expert mode, you can customize the options of each mode.
Gamma: Select 1.9, 2.2, or 2.4.
a. Method: 2 points
- Pattern: Inner, Outer
- Contrast Red/Green/Blue, Brightness Red/Green/Blue:
Adjustable range -50 - +50.
b. Method: 10 points IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit that indicates the
size of the video signal and can be set as either 10, 20, 30 - 90,
or 100. You can fine-tune for each setting as shown below.
- Luminance: If you set up luminance for 100 IRE, a luminance
value satisfying each gamma is automatically calculated for each step from 10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
Color Manage- Adjusts Red/Green/Blue/Yellow/Cyan/Magenta colors. Allows an
ment
expert to adjust the tint using a test pattern. Six colors (Red/Green/
Blue/Cyan/Magenta/Yellow) can be selectively adjusted without affecting other colors.
You may not see colors change on a normal picture even after adjustment.
- Chroma Red/Green/Blue/Yellow/Cyan/Magenta,
Tone Red/Green/Blue/Yellow/Cyan/Magenta:
The adjustment range is -30 - +30 each.
48
CUSTOMIZING SETTINGS
AUDIO Settings
1 Press the SETTINGS button.
2Use the ︿, ﹀, ︿, ﹀ buttons to select AUDIO
and press the OK button.
3Use the ︿, ﹀, ︿ or ﹀ button to set up a desired
item and press the OK button.
-T
o return to the previous menu, press the ꕣ
button.
AUDIO
ꔂ Move ꔉ OK
• Auto Volume : On
• Clear Voice II : Off ꕅ 3
• Balance
0
L
• Sound Mode : Standard
4When you are finished, press EXITꕯ.
• Infinite Surround : Off
• Treble 50
• Bass
50
• Reset
The available audio settings are described as follows.
Setting
Description
Auto Volume
Automatically adjusts the volume level.
Clear Voice II
Makes the voice from the projector crisp and clear.
Balance
Adjusts the balance of the left and right speakers.
Sound Mode
Adjusts sound.
Option
Standard
Select when you want standard-quality sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sport
Select when you watch sports events.
Game
Select when you play games.
Infinite
Surround
LG's unique sound option provides 5.1 channel stereo sound from
two speakers.
Treble
Adjusts the treble sound.
Bass
Adjusts the base sound.
Reset
Resets all the sound settings to the factory default.
R
CUSTOMIZING SETTINGS
49
TIME Settings
1 Press the SETTINGS button.
2Use the ︿, ﹀, ︿ or ﹀ button to select TIME and
TIME
press the OK button.
3Use the ︿, ﹀, ︿ or ﹀ button to set up a desired
ꔂ Move ꔉ OK
• Sleep Timer
: Off
• Auto Off
: 60 min.
• Automatic Standby
: 4 hours
item and press the OK button.
-T
o return to the previous menu, press the ꕣ
button.
4When you are finished, press EXITꕯ.
The available time settings are described as follows.
Setting
Sleep
Timer
Auto Off
Description
The projector is turned off at the preset time.
If there is no signal, the projector automatically turns off after the preset
time has elapsed.
Automatic If there is no press any button when Automatic Standby function is on,
Standby
the Projector automatically switches to the standby mode.
50
CUSTOMIZING SETTINGS
OPTION Settings
1 Press the SETTINGS button.
2Use the ︿, ﹀, ︿ or ﹀ button to select OPTION
and press the OK button.
3Use the ︿, ﹀, ︿ or ﹀ button to set up a desired
item and press the OK button.
-T
o return to the previous menu, press the ꕣ
button.
4When you are finished, press EXITꕯ.
OPTION
• • • • • • • • • • • • • ꔂ Move ꔉ OK
Language
PJT Mode
: Front
Auto Keystone
: On
KeyStone
1
Blank Image
:Blue
3D Mode
Auto Input Search
: Off
Auto Power
: Off
High Altitude
: Off
Caption
: Off
Standby Light
: Off
DivX(R) VOD
Initial Setting
The available option settings are described as follows.
Setting
Description
Language Selects a desired Menu Language.
PJT
Mode
This function turns the projected image upside down or flips horizontal.
yySelect Rear when projecting from the back of the transparent screen
purchased separately.
yySelect Ceiling when installing the product on the ceiling.
yyWhen PJT Mode is Rear/Front Ceiling, the left/right of the speaker
changes automatically.
Auto
Auto Keystone provides a rectangular screen image by automatically
Keystone adjusting the Keystone number when there is a trapezoidal screen image
caused by tilting of the projector.
Option
On
Automatically adjusts the Keystone number.
Off
Manually adjusts the Keystone number.
Keystone To prevent the screen image from becoming trapezoidal, Keystone adjusts
the top and bottom width of the image if the projector is not set at a right
angle to the screen.
Blank
Selects a background for blank Image. (see page22)
Image
3D Mode Selects 3D mode.
Auto
Automatically searches and displays an input signal type when it is reInput
ceived.
Search
CUSTOMIZING SETTINGS
Setting
Auto
Power
Description
Makes the projector turn on automatically when the adaptor plug is inserted.
Option
On
High
Altitude
Caption
Standby
Light
DivX(R)
VOD
Initial
Setting
When the DC plug is connected to the projector, it turns on
automatically.
Off
When the DC plug is connected to the projector, it goes into
standby mode.
If the projector is used at an altitude higher than 1200 meters, turn this
on.
Otherwise, the projector may overheat or its protection function may be
activated. If this happens, turn the projector off and then on again after
waiting for several minutes.
If the language for the AV input is set to Korean, captions can be turned
on or off.
Adjusts the LED button indicator.
Option
On
When the power button is touched, the LED is illuminated at
maximum brightness. In standby mode, it reduces to 20 %
brightness.
Off
When the power button is touched, the LED is illuminated
at maximum brightness. In standby mode, LED indicator is
turned off.
sets DivX related settings.
Resets all the projector settings to the factory default.
51
52
MAKING CONNECTIONS
MAKING CONNECTIONS
You can connect various external devices to the ports on the projector.
Computer/Notebook
DVD
Video
Digital Device
USB
Headphones
HDMI - 53Page
Component - 55Page
INPUT (AV) - 54Page
RGB - 53Page
Memory - 25Page
Headphones - 55Page
Game Console
MAKING CONNECTIONS
Connecting to an HD
Receiver, DVD, or VCR
Player
Connect an HD receiver, DVD, or VCR
player to the projector and select an appropriate input mode.
HDMI Connection
With an HDMI cable, you can enjoy high
quality picture and sound. Press the
INPUT button on the remote control to
select HDMI.
Connecting to a PC
The projector supports Plug & Play.
A PC will automatically recognize the
projector and requires no driver to be
installed.
RGB Connection
Connect the PC output and the PC
video input port of the projector with the
RGB cable.
For audio signal, connect the PC and the
projector with an optional audio cable.


Accessories
Optional
Extras
Accessories
+'0,
53
Optional
Extras
$8',2287
5*%2873&
54
MAKING CONNECTIONS
Connecting to the AV
INPUT
Connect the output ports of an external
device and the AV INPUT port of the
projector. Press the INPUT button to
select AV.
Optional
Extras
Accessories
Accessories
$8',2287
5*%2873&
You can connect the audio cable without
using a gender as shown in the illustration above.
Optional
Extras
$9287
/HIW
5LJKW
$8',2287
MAKING CONNECTIONS
Component Connection
You can enjoy vivid images when you
connect an external device with a RGB
IN port to the component port of the
projector. Press the INPUT button on
the remote control to select Component.
Optional
Extras
Accessories
Optional
Extras
Optional
Extras
Y
PB
VIDEO OUT
PR
(L)
(R)
AUDIO OUT
Connecting to
Headphones
You can listen to the audio through a
headphone.
Optional
Extras
55
56
MAINTENANCE
MAINTENANCE
Clean your projector to keep it in optimum condition.
Cleaning the Projector
Cleaning the Lens
If there is any dust or staining on the
lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to
clean the lens.
To remove dust or stains, use an air
spray or apply a small amount of cleaning agent onto a swab or soft cloth to
lightly rub the lens.
Please be aware that liquid may flow
onto the lens if the product is sprayed
directly onto the lens.
Cleaning the Projector Case
To clean the projector case, first unplug
the power cord.
To remove dust or stains, use only a dry,
lint-free, nonabrasive cloth to polish the
lens.
Do not use alcohol, benzene, thinners
or other chemicals, which may damage
the case.
SPECIFICATIONS
SPECIFICATIONS
MODELS
Resolution (Pixel)
Aspect ratio
Panel size (mm)
Projection distance
(Video size)
Ratio of upward
projection
Working range of the
remote control
Video input
AC-DC Adaptor
Audio Output
Height (mm)
Width (mm)
Depth (mm)
Weight (g)
USB Device
Operation environment
PB62G (PB62G-JE)
1280 (Horizontal) × 800 (Vertical)
16:10 (Horizontal:Vertical)
11.623
0.80 m - 3.25 m (63.5 cm - 254.0 cm)
100 %
3m
NTSC M / PAL - B, D, G, H, I / PAL M / PAL N / PAL 60 / SECAM
19.5 V
, 4.62 A / 19 V
, 3.42 A
1W+1W
33.8 (without foot), 38.3 (with foot)
158
101.5
445
5 V, 0.5 A (Max.)
Temperature
Operation
0 °C - 40 °C
Storage
-20 °C - 60 °C
Relative Humidity
Operation
0 % - 80 %
Storage
0 % - 85 %
* Contents in this manual may be changed without prior notice due to upgrade of
product functions.
57
58
SPECIFICATIONS
Supported Monitor Display
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
59.94
HDMI/DVI-DTV/WiDi
supported mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480
31.469
31.5
59.94
60
Resolution
800 x 600
37.879
60.31
720 x 576
31.25
50
1024 x 768
48.363
60.00
119.99
1280 x 720
1152 x 864
54.348
60.053
37.5
44.96
45
50
59.94
60
1280 x 800
49.68
60
1920 x 1080
1360 x 768
47.712
60.015
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
1280 x 1024
63.981
60.020
1400 x 1050
65.317
59.979
1680 x 1050
65.3
60
If an invalid signal is input into the
yy
projector, it will not be displayed
properly on the screen or a
message such as “No Signal” or
“Invalid Mode” will be displayed.
The projector supports the DDC1/
yy
2B type as the Plug & Play function
(Auto-recognition of PC monitor).
PC synchronization signal types
yy
supported: Separate type
synchronization.
In PC mode, 1280 x 800 is
yy
recommended for the best picture
quality.
Component port connecting
information
Signal
Component
480i / 576i
o
480p / 576p
o
720p / 1080i
o
1080p
o
(50 Hz / 60 Hz only)
SPECIFICATIONS
Open Source Software Information
To obtain the source code under GPL,
LGPL, MPL and other open source
licenses, that is contained in this
product,
please visit http://opensource.lge.com.
In addition to the source code, all
referred license terms, warranty
disclaimers and copyright notices are
available for download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of performing
such distribution (such as the cost of
media, shipping and handling) upon
email request to opensource@lge.com.
This offer is valid for three (3) years from
the date on which you purchased the
product.
59
The model and serial number of the projector
are located on the back or on the side of the
projector. Record them below should you ever
need service.
MODEL
SERIAL