INSTALLATION/OPERATION
DIGITAL VIDEO RECORDER
(MPEG4 - 4/8/16 CHANNEL)
Quantum-DVD Rev A
KD16-0205E
MPEG4-4/8/16Channel - Installation/ Operation Manual
WARNING: To prevent a risk of fire of electric shock, do not expose this product to rain or moisture.
• This installation should be made by a qualified service person and should conform to all local codes.
• This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Copyright
This manual is the intellectual property of Manufacturer and is
protected by copyright. All rights are reserved. No part of this
document may be reproduced or transmitted for any purpose,
by whatever means, be they electronic or mechanical, without
the express written permission of Manufacturer.
Edition : Dec.2005
Copyright 2005 Manufacturer
Note
This Manual was compiled with the greatest of care and all information double
checked. At the time of printing the description was complete and correct.
Because of the further development of products, the content of the manual might
change without prior notice. Manufacturer will not be liable for damage, which is
directly or indirectly due to errors, incompleteness, or discrepancies the manual
and the product described.
Trade marks All names used in this manual for hardware and software are very probably
registered trademarks and must be treated as such.
Quantum—DVD Manual Rev A
2/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Contents
FOR THE SAFETY OF CUSTOMERS…………………...………………………….…………………………4
DESCRIPTION OF PARTS AND FUNCTION…………...…………………………………………………....6
COMPOSITION OF UNIT…………………………………...……………………………………………………6
FEATURES …………………………………………………..……………………………….……………….....8
DESCRIPTION OF PARTS AND FUNCTION ………………..…………….…………..……..……………….. 9
Front Panel……………………………………………………..………………………………..…………........9
Rear Panel………………………………………………………..………………………………………… …11
Connection diagram………………………………………………………………………………………….13
OSD Description.................................................................................................................................................15
MENU………………………………………………………………...………………………………………......16
MENU TREE…………………………………………………………..…………………………………………16
Main Menu.…………………………………………………………..………………………………………..18
Display………………………………………………………………..………………………………………..18
Recording……………..………..……………………………………..………………………………………..19
System Set……………………………………………………………..……………………………………….29
Network Set………………………………………………………………..…………….……………………..32
Event Notification…...………………………….…………………………..……………………………….….33
Search………………………………………….……………………………………………………….………34
Date / Time Search……………………………….…………………………………………………….………34
Calendar Search……….……………………………………………………………………………….………34
Back Up…….……….……………………….……………………………………………………….………36
Client Program…………………………………………………………………………………........................40
Q & A……………….………………………………………………………………………………….…………58
Appendix 1…...……………………………………………………………………….........…………………….60
Appendix 2...………………………………………………………………………….........…………………….62
Appendix 3…...........………………………………………………………………….........…………………….65
Appendix 4…...........………………………………………………………………….........…………………….69
Appendix 5…...........………………………………………………………………….........…………………….75
Appendix 6…...........………………………………………………………………….........…………………….77
Appendix 7 (Specification)……………………………………………………...................…………………….84
Quantum—DVD Manual Rev A
3/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
1. FOR THE SAFETY OF CUSTOMERS
SAFETY PRECAUTIONS
1.
Do not modify the three-prong grounding type power plug in any way.
2.
Operate this unit only from the type of power source indicated on the label.
3.
Do not block or cover ventilation openings on the Unit.
4.
Do not place this unit near a radiator or heating vent.
5.
Do not push objects of any kind through cabinet openings. This may result in fire or
electrical shock.
6.
Before adding attachments always ask a service technician to perform routine safety
tests to determine that equipment is in safe operating condition. Ground potential tests
should be part of the routine safety check made by the service technician.
7.
Do not place the unit on an unstable cart, stand, or shelf where it may fall and injure
personnel or damage equipment.
8.
Route power cords so that they cannot be walked upon or tripped over. Do
not allow anything to rest on the power cord.
9.
Do not install the unit in wet areas, or where it may be exposed to rain or
water. Do not spill liquid of any kind on the unit.
10.
Unplug the power cord from the unit before cleaning case. Use only
a damp cloth. Do not use alcohol, spirits, or ammonia to clean the device.
DO NOT ATTEMPT TO CLEAN THE INTERIOR OF THIS UNIT- THIS ACTION
MUST BE PERFORMED BY THE SERVICE TECHNICIAN AS REQUIRED
DURING NORMAL MAINTENANCE.
11.
Refer all servicing to qualified service personnel. REMOVAL OF TOP
COVER BY UNAUTHORIZED PERSONNEL MAY EXPOSE THE USER TO
DANGEROUS VOLTAGES OR OTHER HAZARDS.
12.
Unplug the unit immediately and notify the service technician.
A.
If liquid has been spilled into the device or the device has been
exposed to rain or water.
B.
If the unit has been dropped or the casing damaged.
C.
If fuses continue to blow.
D.
If the power cord is damaged or frayed.
E.
If a distinct change from normal operation is apparent.
Quantum—DVD Manual Rev A
4/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
When replacement parts are required, be sure that the service technician
uses components specified by the manufacturer which have the same characteristics as the
original parts. UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL
SHOCK OR OTHER HAZARDS.
Upon completion of any service or repairs, ask the technician to perform
safety checks to determine that the equipment is in safe operating condition.
WARNING: SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVERS OF
THIS DEVICE. DO NOT OPEN THE COVERS UNDER ANY CIRCUMSTANCES,
THERE ARE NO USER SERVICEABLE COMPONENTS INSIDE
Quantum—DVD Manual Rev A
5/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
2. DESCRIPTION OF PARTS AND FUNCTION
2-1 COMPOSITION OF UNIT
Standard
Digital Video Recorder System
Please read this manual before using
DVR
User Manual
Remote Control
Batteries
Power Cable
If you have received a product “without HDD”, the accessories to fit HDD will be supplied
1) Stand for HDD installation 2) fixing screws will be supplied.
Accessories are subject to change without notice.
Quantum—DVD Manual Rev A
6/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Use the designated HDD
Please use the designated HDD. Otherwise, recording may not operate correctly.
Maker
HDD Capacity
Western Digital
80GB, 160GB, 250GB, 320GB
Quantum—DVD Manual Rev A
7/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
2-2 FEATURES
● Convenience
- User-friendly UI( Text Based User Interface)
- Easy-to-use menu composition
- Easy-to-use recorded data search (Time, Date, Motion, Alarm)
● Stability
- Auto restart after power interruption
-
DB structure offers data stabilization and best storage utilization
● Expandability
-Various remote multi DVR’s can be controlled by Web browser (PC Client System)
● Technology
-Embedded LINUX OS
-Totally maximum recording rate 100 fps (Pal) 120 fps (NTSC)
-High-resolution & high-quality MPEG-4 algorithm
-Using Water marking & scrambling technologies,
-Strong protection recorded data
-MPEG-4 : 1 ~ 2 Kbytes per image with resolution 360x240
● Functionality
- Variable recording function (normal, alarm, motion, schedule)
- Full channel real-time monitoring
- Live monitoring, recording, playback, backup, remote access at the same time
- Multi channel playback
- Variable events notification to e-mail, buzzer or PC Client system
Quantum—DVD Manual Rev A
8/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
2-3 DESCRIPTION OF PARTS AND FUNCTION
2-3-1 Front Panel
(1) LED
- REC : Recording status (When recording is on, the red LED flashes)
- PWR : System Power On/Off (When power is on, the green LED is lit)
(2) USB 2.0 PORT
- USB2.0 connector
(3) POWER BUTTON
- System Power On/Off
(4) NUMERIC & CHARACTER
- Input for numeric & character
(5) MENU
- Displays on the menu on the screen
(6) SEARCH
- Entering search mode directly
Quantum—DVD Manual Rev A
9/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
(7) PLAY ( )
- Playback of the recorded data
- If pressed again in play mode, fast-forward will be executed
(8) REWIEND ( )W
- Playback on the reverse
(9) PAUSE (▌▌)
- To freeze picture on playback mode and live mode.
(10) STOP / EJECT ( █ )
- To stop playback and go back to live mode.
(11) REC (●)
- To start & stop manual recording of relevant camera in a full screen live mode.
(12) VOL (▲▼)
- To adjust volume up and down.
(13) AUDIO (8/16CH Only)
- when user selects “audio” key, available audio will be switched.
(14) ARROW KEY
- Curser shifting on the menu
- Shows the divided screen
(15) SELECT
- Menu selection
Quantum—DVD Manual Rev A
10/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Ethernet
2-3-2 Rear Panel
(1) Video Input (BNC)
- 16/8/4 Camera input (1.0 v p-p, 75Ω) depending on the model
(2) Video Out (BNC / S-VIDEO / VGA)
- Composite Output through BNC / S-VIDEO / VGA
(3) Line Audio Input
- 4 Audio Input through line (1x Audio on 4way)
(4) Audio Output
- 1 Audio Output
(5) RS232
- 1 Serial Communication
(6) Network Port (RJ-45)
- Available to monitor live screen and recorded data on the HDD through Internet or LAN
(7) DIP switch (NTSC/PAL Video Selection)
-Selectable either NTSC or PAL
Quantum—DVD Manual Rev A
11/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
(08) RS422 / 485
- 1 Serial Communication for Pan / Tilt Camera (Future Development)
(09) Alarm/Sensor
- Alarm / 4 Sensor input / 1 output port
(10) AC Power
- AC 110~240 V (Free Voltage)
ATTENTION
When the video format is changed (NTSC/PAL), the system should be re-booted
The video format should be selected before booting
Default Passwords
“00000000” i.e. 8x Zero’s. Password is required if you need to down-power or stop recording, prompt
will be displayed asking for password.
Web Client
User ID “admin” (not case sensitive). Admin ID cannot be changed this is full administrator ID.
Password “00000000” i.e. 8x Zero’s
Quantum—DVD Manual Rev A
12/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
2-3-3 System Connection Diagram
Quantum—DVD Manual Rev A
13/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
2-3-4. Remote Controller
1.Power :
2. Rec : Start & Stop Recording
3. ~ :Key for figure and character
4. PTZ: Controlling PTZ camera
(future development)
5. OSD : Operating OSD ON/OFF
6. SEQ : Key for SEQ operation
7. LOG : Direct access Log list
8. INFO: Direct access system Info.
9. ID : Reserved.
10. MUTE : Audio Mute
11. AUDIO : Available audio switching
when user select this key
12. MENU : Entering system menu
13. SEARCH : Entering search
14. ARROW & SPLIT : Key moving
left, right, up and down. Also, Screen
split display shows
15. VOL”+,-“ : Up, down volume
16. CH “+,-“ : Up, down channel(s)
17.
: Play(or fast forward)
18.
: Reverse play
19 II
: Pause
20. █ : Stopping playback
Quantum—DVD Manual Rev A
14/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
2-3-5. OSD Description
Recording on
:
NORMAL: This shows the recording Mode.
* 16/8channel doesn’t show recording icon as 4channel.
If the user programmed “schedule recording” and current
time is out of range, “STANDBY” will be shown when the
“Rec” button is pushed
HD :34%, This shows how much as a percentage is
occupied on the Hard Disk Drive
12-31-2004 12:00:00: This shows the system date & time
Quantum—DVD Manual Rev A
15/86
This shows “Alarm recording
mode / Motion recording
mode/ Power loss”/ Video
Loss” in left to right order.
MPEG4-4/8/16Channel - Installation/ Operation Manual
3. MENU3-1. Menu tree
Main Menu
Display Set
Monitor Adjustment (4CH Only)
Camera Covert
Camera Name
OSD On/Off
Event Clear
Audio
Repeat Recording
Watermark
Record Resolution
Recording Set
Global Parameter
Save and exit
Normal Recording
Frame Rate
Alarm Recording
Recording Quality
Motion Recording
P. Alarm Duration
Schedule Recording
Setup Motion
(post motion/area/sensitivity)
Recording Priority
Setup Schedule
Language
System Set
Basic
Initialization
Disk Format
Date Format
Password Change
Date/Time
Information
Client Account
Program Update
Sensor
P.T.Z
Quantum—DVD Manual Rev A
16/86
Add New Account
Delete Account
Save and exit
MPEG4-4/8/16Channel - Installation/ Operation Manual
Network Set
Use Dynamic IP-No
Use Dynamic IP-Yes
Event Notification
IP address
Gate Way
Net Mask
DNS Server
DVR Port
Web Server Port
Save and Exit
XDSL User ID
XDSL Password
DDNS User ID
DDNS Password
Save and Exit
E-Mail Registration
E-Mail Report
Notification Out
E-Mail
Beep
Alarm Out
Search
Date/Time Search
Calendar Search
Quantum—DVD Manual Rev A
Backup
B.D.: CD-WR / Flash
Log
F.F.: Exclusive / AVI
17/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
3-2 Main Menu
NOTE
Before using, be sure to setup the unit properly.
Below menu shows when you press the menu button on the front when the system is on.
MAIN MENU
DISPLAY SET
RECORDING SET
SYSTEM SET
NETWORK SET
EVENT NOTIFICATION
Please use UP () or DOWN() on the front Panel to move to next menu. To move to the submenu,
use the “SELECT” button.
Display Set
DISPLAY SET
MONITOR ADJUSTMENT (4CH Only)
CAMERA COVERT
CAMERA NAME
OSD ON/OFF
SET DISPLAY SEQUENCE(8/16CH Only)
EVENT CLEAR
Monitor Adjustment- (4CH Only)
This controls the verticality and horizontality of live picture. With the background screen shown, use
Left (
), Right( ), Up(▲), Down(▼) button for setting the location.
Camera Covert
This allows the camera to be hidden, which means, camera is not available/shown in live monitoring
(just blue screen), the camera will still be recording (if recording is “on” condition).
Quantum—DVD Manual Rev A
18/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Camera Name
Camera title can be displayed on the screen.
OSD On/Off
OSD on/off: Selecting whether the OSD is displayed.
Set Display Sequence
SET DISPLAY SEQUENCE
FULL DISPLAY SEQUENCE
QUAD DISPLAY SEQUENCE
START FULL DISPLAY SEQUENCE
START QUAD DISPLAY SEQUENCE
Sequence dwell time can be selected among 5,10,15,30,45,60 sec. When you select “ Start Full or
Quad Display Sequence”, monitor switch will be started (Or, user can select “ SEQ” button on the
remote controller)
Event Clear
This is for erasing OSD characters related with events.
Recording Set
In our system, all recorded data can be saved in the format of watermark or scrambling when user
select “watermark :On” (Default On)So, After downloading the saved data you want to check , user
can confirm it whether it has been changed by someone using PC software provided.
RECORDING SET
GLOBAL PARAMETER
NORMAL RECORDING
ALARM RECORDING
MOTION RECORDING
SCHEDULE RECORDING
RECORDING PRIORITY
Quantum—DVD Manual Rev A
19/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Global Parameter
All the setup values for Audio/ Repeat/ Watermark / Resolution will be applied globally to all channels.
Normal Recording
It executes the continuous recording according to the designated set-up value.
Alarm recording
It executes the recording when sensor is taken.
Motion recording
It executes the recording when motion is captured.
Schedule recording
It executes the recording as per the programmed time table.
Recording priority
It specifies the priority among 4 kinds of recording methods.
NOTE
“Instant playback” (direct playback via
, not search mode) is available. The file is created on the
unit of 500Mbyte
Recording Parameter
RECORDING PARAMETER
AUDIO : ON/OFF
REPEAT RECORDING : ON/ OFF
WATERMARK : ON /OFF
RECORDING RESOLUTION
SAVE AND EXIT
Quantum—DVD Manual Rev A
20/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Audio Recording (4CH)
4CH : On/Off. When audio is “on”, the audio will be input globally.
RECORDING PARAMETER
AUDIO 1 RECORDING: OFF~CH16
AUDIO 2 RECORDING: OFF~CH16
AUDIO 3 RECORDING: OFF~CH16
AUDIO 4 RECORDING: OFF~CH16
REPEAT RECORDING OFF
WATERMARK OFF
RECORDING RESOLUTION
SAVE AND EXIT
Audio Recording (8/16CH)
8/16CH: 4 Audio are available. User can match 4 audios to each video channels.
Repeat recording
This sets the recording mode when the HDD capacity is exceeding. Selectable between “On”
(overwrite) / “Off” (stop).
Watermark
This can select either Watermark On or OFF. This menu is for protecting video data from forging when
exported to the digital media for backup.
Recording Resolution
Unit supports 360x288 / 720x288 mode (PAL) or 360x240 / 720x240 mode NTSC. The default is
360x288 and “← , →” buttons are used for changing the resolution.
NOTE
1. The resolution is applied to all channels. (Individual set-up is not possible)
2. When you are in the “recording” mode, the menu, “Global parameter” and 4 recording
mode (normal, alarm, motion, schedule)” can not be changed. If you want to change these
settings you must stop recording first.
Quantum—DVD Manual Rev A
21/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Normal Recording
NORMAL RECORDING (4channel Only)
CH1 FRAME RATE
: 25FPS
CH2 FRAME RATE
: 25FPS
CH3 FRAME RATE
: 25FPS
CH4 FRAME RATE
: 25FPS
CH1 RECORDING QUALITY : HIGH
CH2 RECORDING QUALITY : HIGH
CH3 RECORDING QUALITY : HIGH
CH4 RECORDING QUALITY : HIGH
SAVE AND EXIT
Frame Rate (fps) :4channel
The above shows available frame rate each channel. In 360x288 mode, 0~25fps is available each
channel (4 channel totally 100fps) and 720x 288 is 1~12/13fps each (4 channel total 50fps, available
max. frame rate for each channel is 25 fps- for exam, Ch.1 25 fps, Ch2. 25 fps, Ch3. 0fps, Ch4 0fps. ~)
Frame rate will be changed pushing the “←, → ” button
NORMAL RECORDING (8/16channel Only)
PAGE : 1 (8/16CH Only)
CH1
FRAME RATE
: 6FPS
CH2
FRAME RATE
: 6FPS
CH3
FRAME RATE
: 6FPS
CH4
FRAME RATE
: 6FPS
CH1
RECORDING QUALITY : HIGH
CH2
RECORDING QUALITY : HIGH
CH3
RECORDING QUALITY : HIGH
CH4
RECORDING QUALITY : HIGH
SAVE AND EXIT
Frame Rate (fps) :8/16 channel
The above shows available frame rate each channel. In 360x288 mode, 6 fps is available each
channel (16/8 channel totally 100fps) and 720x 288 is 3 fps each (16/8 channel totally 50fps).
Individual frame rate control is available as per 4channel.
Frame rate will be changed pushing the “←, → ” button
Quantum—DVD Manual Rev A
22/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Recording Quality
Selectable from High, Mid, Low.
Save and Exit
All the set-up value will be stored and move to higher menu.
Alarm Recording
Either one is taken from 4 sensors, the recording will be activated as per set-up value.
ALARM RECORDING (4channel Only)
CH1 FRAME RATE
: 25FPS
CH2 FRAME RATE
: 25FPS
CH3 FRAME RATE
: 25FPS
CH4 FRAME RATE
: 25FPS
CH1 RECORDING QUALITY : HIGH
CH2 RECORDING QUALITY : HIGH
CH3 RECORDING QUALITY : HIGH
CH4 RECORDING QUALITY : HIGH
POST ALARM DURATION
: 5sec
SAVE AND EXIT
Frame Rate (fps) :4channel
The above shows available frame rate each channel. In 360x288 mode, 0~25fps is available each
channel (4 channel totally 100fps) and 720x 288 is 1~12/13fps each (4 channel totally 50fps, available
max. frame rate each channel is 25 fps- for exam, Ch.1 25 fps, Ch2. 25 fps, Ch3. 0fps, Ch4 0fps. ~)
Frame rate will be changed pushing the “←, → ” button
Quantum—DVD Manual Rev A
23/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
ALARM RECORDING (8/16channel Only)
PAGE : 1 (8/16CH Only)
CH1
FRAME RATE
: 6FPS
CH2
FRAME RATE
: 6FPS
CH3
FRAME RATE
: 6FPS
CH4
FRAME RATE
: 6FPS
CH1
RECORDING QUALITY : HIGH
CH2
RECORDING QUALITY : HIGH
CH3
RECORDING QUALITY : HIGH
CH4
RECORDING QUALITY : HIGH
POST ALARM DURATION
: 5sec
SAVE AND EXIT
Frame Rate (fps) :8/16 channel
The above shows available frame rate each channel. In 360x288 mode, 6 fps is available each
channel (16/8 channel totally 100fps) and 720x 288 is 3 fps each (16/8 channel totally 50fps).
Individual frame rate control is available as per 4channel.
Frame rate will be changed pushing the “←, → ” button
Recording Quality
Selectable from High, Mid, Low.
Post Alarm Duration
After alarm activates, this sets how long the recording continues. The value is from
5/ 30/ 60/ 90/ 120/ 150/ 180/ 210/ 240 sec.
Save and Exit
All the set-up value will be stored and move to higher menu.
Quantum—DVD Manual Rev A
24/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Motion Recording
MOTION RECORDING (4channel Only)
CH1 FRAME RATE
: 25FPS
CH2 FRAME RATE
: 25FPS
CH3 FRAME RATE
: 25FPS
CH4 FRAME RATE
: 25FPS
CH1 RECORDING QUALITY : HIGH
CH2 RECORDING QUALITY : HIGH
CH3 RECORDING QUALITY : HIGH
CH4 RECORDING QUALITY : HIGH
SETUP MOTION
SAVE AND EXIT
Frame Rate (fps) :4channel
The above shows available frame rate each channel. In 360x288 mode, 0~25fps is available each
channel (4 channel totally 100fps) and 720x 288 is 1~12/13fps each (4 channel totally 50fps, available
max. frame rate each channel is 25 fps- for exam, Ch.1 25 fps, Ch2. 25 fps, Ch3. 0fps, Ch4 0fps. ~)
Frame rate will be changed pushing the “←, → ” button
MOTION RECORDING (8/16channel Only)
PAGE : 1 (8/16CH Only)
CH1
FRAME RATE
: 6FPS
CH2
FRAME RATE
: 6FPS
CH3
FRAME RATE
: 6FPS
CH4
FRAME RATE
: 6FPS
CH1
RECORDING QUALITY : HIGH
CH2
RECORDING QUALITY : HIGH
CH3
RECORDING QUALITY : HIGH
CH4
RECORDING QUALITY : HIGH
SETUP MOTION
SAVE AND EXIT
Frame Rate (fps) :8/16 channel
The above shows available frame rate each channel. In 360x288 mode, 6 fps is available each
channel (16/8 channel totally 100fps) and 720x 288 is 3 fps each (16/8 channel totally 50fps).
Individual frame rate control is available as per 4channel.
Frame rate will be changed pushing the “←, → ” button
Quantum—DVD Manual Rev A
25/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Recording Quality
Selectable from High, Mid, Low.
Setup Motion
SETUP MOTION
PAGE : 1 (8/16CH Only)
POST MOTION : 30 SEC
SET CH1
MOTION AREA
SET CH2
MOTIION AREA
SET CH3
MOTION AREA
SET CH4
MOTION AREA
CH1 MOTION SENSITIVITY:
CH2 MOTION SENSITIVITY:
CH3 MOTION SENSITIVITY:
CH4 MOTION SENSITIVITY:
SAVE AND EXIT
HIGH
HIGH
HIGH
HIGH
Post Motion
This sets the how long the recording lasts after motion is taken. The value is among 30 ~ 240 sec.
Set CH. Motion Area
The following will be displayed when user selects the menu.
1
2
3
4
The detection area is divided 8x6 cells. Default is all-cells activated. 1,2,3,4 cells (white color
background) is disabled area. “SEL” button is required for selecting some area.
Motion Sensitivity
It consists of High, Mid, Low.
NOTE
When you record the camera image with the motion-recording mode, the data file will be saved
depending on the motion sensitivity. So, higher caution is required to apply the sensitivity to the actual
recording.
Quantum—DVD Manual Rev A
26/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Schedule Recording
SCHEDULE RECORDING (4channel Only)
CH1 FRAME RATE
: 25FPS
CH2 FRAME RATE
: 25FPS
CH3 FRAME RATE
: 25FPS
CH4 FRAME RATE
: 25FPS
CH1 RECORDING QUALITY : HIGH
CH2 RECORDING QUALITY : HIGH
CH3 RECORDING QUALITY : HIGH
CH4 RECORDING QUALITY : HIGH
SETUP SCHEDULE
SAVE AND EXIT
Frame Rate (fps) :4channel
The above shows available frame rate each channel. In 360x288 mode, 0~25fps is available each
channel (4 channel totally 100fps) and 720x 288 is 1~12/13fps each (4 channel totally 50fps, available
max. frame rate each channel is 25 fps- for exam, Ch.1 25 fps, Ch2. 25 fps, Ch3. 0fps, Ch4 0fps. ~)
Frame rate will be changed pushing the “←, → ” button.
SCHEDULE RECORDING (8/16channel Only)
PAGE 1
CH1 FRAME RATE
: 25FPS
CH2 FRAME RATE
: 25FPS
CH3 FRAME RATE
: 25FPS
CH4 FRAME RATE
: 25FPS
CH1 RECORDING QUALITY : HIGH
CH2 RECORDING QUALITY : HIGH
CH3 RECORDING QUALITY : HIGH
CH4 RECORDING QUALITY : HIGH
SETUP SCHEDULE
SAVE AND EXIT
Frame Rate (fps) :8/16 channel
The above shows available frame rate each channel. In 360x288 mode, 6 fps is available each
channel (16/8 channel totally 100fps) and 720x 288 is 3 fps each (16/8 channel totally 50fps).
Individual frame rate control is available as per 4channel.
Frame rate will be changed pushing the “←, → ” button
Quantum—DVD Manual Rev A
27/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Recording Quality
Selectable from High, Mid, Low.
Setup Schedule
SCHEDULE SETUP
0
4
MON
TUE
WED
THU
FRI
SAT
SUN
SAVE AND EXIT
8
12
16
20
“SEL” button is used for selecting relevant time and day. Arrow Key will be used for movement.
NOTE
To change the items regarding recording (resolution, mode, frame rate, etc), you must stop
recording first.
Quantum—DVD Manual Rev A
28/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Recording Priority
RECORDING PRIORITY
1ST PRIORITY: NORMAL
2ND PRIORITY: MOTION
3RD PRIORITY: SCHED
4TH PRIORITY: ALARM
SAVE AND EXIT
This sets the priority from the 4 recording methods. If Normal is 1st priority, the recording is
carried out as per normal recording’ setup value.
System Set
SYSTEM SET
BASIC
DISK FORMAT
PASSWORD CHANGE
PROGRAM UPDATE
CLIENT ACCOUNT
SENSOR
Basic
BASIC
LANGUAGE : ENGLISH
INITIALIZATION
DATE FORMAT : mm-dd- yyyy
DATE/TIME
: 11-18-2004 03:50:31
INFORMATION
SAVE AND EXIT
Language
English, Italian, and French (4 way only). The default is English.
English, Italian, French and Hungarian (8/16 way). The default is English.
Quantum—DVD Manual Rev A
29/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Initialization
All the menu value will be returned to the factory default. To initialize the system, you must stop
recording first.
Date Format
Can select among the formats, mm-dd-yyyy / dd-mm-yyyy, yyyy-mm-dd. If date format needs to be
changed, you must stop recording first.
NOTE
PLAYBACK FOLLOWING TIME CHANGE
The DVR uses the time and date to index video on the hard disk drive so you can find it later.
Changing the time can cause the DVR to work incorrectly when you try to play back video. If you set
the time 1 hour ahead, this is not a problem. But, if you set the time 1 hour back, there will be more
than one recording of the same time.
Such as during the October Daylight Saving Time changeover, if you try to search for video between
1 a.m and 2 a.m, the recorder may not operate properly because there will be two hours of recorded
video during this time period. To view video during this overlapping time period, you must start
playback before 1 a.m, then recorder will play both hours between 1 a.m and 2 a.m.
You cannot do a backward search through the overlapping time. But, you can do forward search.
Disk Format
DISK FORMAT
INTERNAL HDD
: YES
EXTERNAL DEVICE // HDD : NOT FOUND
EXECUTE FORMAT
Password is required for Disk to be formatted (default password is “00000000” 8x Zero’s, which is the
same if you need to turn “recording off” see page 12 ). You must stop recording and playback first to
format the HDD.
Quantum—DVD Manual Rev A
30/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Client Account
CLIENT ACCOUNT
ADD NEW ACCOUNT
DELETE ACCOUNT
SAVE AND EXIT
CLIENT LIST
To access as a Client on the network you first must register “Add New Account” . User ID &
Password has to be registered at the system first to connect with a ‘user level’. But, administrator can
access without registering. Default Settings USER ID “admin” Password“00000000”
Program Update
The latest firmware version can be upgraded through USB 2.0 Port using a Memory Stick. When
will be shown on the right corner of monitor. Then,
memory stick connects USB port;
enter “menu”-> “System Set”-> “Program Update”. If there is a new file that already installed the
system will recognize “new program”, “New program found” will be displayed on the screen. Then,
press “Select” button/Key. Processing percentage will be displayed.
NOTE.
1. If the system doesn’t recognize “new program”, “New program not found” will be displayed.
2. USB compatibility has been tested successfully, Lexar Jumpdrive 128/256MB, Sandisk Mini Cruzer
128MB & Cruzer Micro 256MB.
3. For system stability please turn off 1) recording 2) playback 3) network connection during
upgrading.
4. After updating program, please reboot the Unit.
Quantum—DVD Manual Rev A
31/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Sensor
SENSOR
SENSOR 1 INPUT
SENSOR 2 INPUT
SENSOR 3 INPUT
SENSOR 4 INPUT
ALARM OUT
SAVE AND EXIT
: N.C
: N.O
: NONE
: NONE
: ON
Sensor Input is selectable N.C, N.O, None.
3. Network Set
NETWORK SET
USE DYNAMIC IP: NO
IP ADDRESS :000.000.000.000
GATEWAY
:000.000.000.000
NETMASK
:000.000.000.000
DNS SERVER :000.000.000.00
DVR PORT
2000
WEBSERVER PORT 80
SAVE AND EXIT
To enter Network Set menu, system will ask for password (default is “00000000” 8x Zero’s).
When user is using a fixed IP, each address is required to be filled out as per network environment.
In fixed IP environment is being used, no need to change DVR & Web Server Port.
As per DVR & Web server port, please refer Appendix 4.
If unit is set up for “Dynamic IP”, the following will be shown.
NETWORK SET
USE DYNAMIC IP: YES
XDSL USER ID :
XDSL PASSWORD :
DDNS USER ID :
DDND PASSWORD:
REGISTERED DOMAIN:
SAVE AND EXIT
For Dynamic IP, either XDSL or Cable. In XDSL environment, the input for XDSL user ID/
Quantum—DVD Manual Rev A
32/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
XDSL password is required. In cable environment, Mac address is required to be filled out irrespective
of ID and password.
DDNS Server is needed when clients connects the DVR, which is on Dynamic IP, since clients doesn’t
know of IP of system DVR. (Please register your ID & domain at www.dyndns.org, in which you can
use DDNS server free of charge). (See Appendix 4)
Event Notification
EVENT NOTIFICATION
►E-MAIL REGISTRATION
E-MAIL REPORT
NOTIFICATION OUT
SAVE AND EXIT
E-MAIL REGISTRATION
►USER1
USER2
USER3
SENDER MAIL ID
SENDER DOMAIN
SEND TEST MAIL
SAVE AND EXIT
At E-Mail registration menu, sent up the e-mail addresses to receive several “Event Notification “.
To register a e-mail address, 1) input the address 2) push “Save and Exit” 3) “ Send test
mail”.
NOTE:
1. Sender mail ID & domain should be input. If not, e-mail doesn’t work. If you input Quantum4 as
mail ID & Norbain.co.uk as domain, sender’s information will be “Quantum4@norbain.co.uk.
I.e. e-mail will come from “Quantum4@norbain.co.uk
2. IP & Gateway in the system should be set up first.
E-MAIL Report is available from Daily/ Weekly/ Immediately. Daily report will be done
00(H):00(M) “Midnight” each day and weekly report will be done 00(H):00(M) “Midnight” on
Sunday.
Quantum—DVD Manual Rev A
33/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Notification Out
NOTIFICATION OUT
► E-MAIL
BEEP
ALARM-OUT
When event happens, each output is operated as per setup value. Events such as “ Video Loss/
Alarm/ Motion/Power Loss” will be sent to E-Mail address or Beep or Alarm according to setup value.
4. Search
SEARCH
DATE/TIME SEARCH
CALENDAR SEARCH
BACKUP
LOG
Date / Time Search
If you select date/time search, the following will be shown.
DATE/TIME SEARCH
EVENT : ALL
HDD : INTERNAL
DATE : 11-12-2004 13:10:50
PLAY
the (▲),(▼) buttons for selecting the clauses. When you select the specific time/date, and then select
“Play”, which execute the playback.
Quantum—DVD Manual Rev A
34/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Calendar Search
Following screen shows when “ Calendar search” is selected.
CALENDAR SEARCH
YEAR :2005
MONTH : 12
SUN MON TUE
1
2
7
8
9
14 15 16
21 22 23
28 29 30
WED THU FRI SAT
[3] 4
5 6
10 11 12 13
17 18 19 20
24 25 26 27
This shows where the recorded data is located at sight. Using “→, ←”buttons, are available to move to
specific time/date. To enter sub-menu (Time), please use “SEL” button. Day (11, eleven) will be
changed ‘up and down (
)’ key.
Buttons “Search” will make a following display.
SEARCH RESULT
DATE 11-12-2004
HOUR 0
4
8
▲
CH1
CH2
CH3
CH4
12
16
20
The hour, which has data, will be shown in white bar, the hour, which you want to play, is selected
with “SEL” button, then the following sub-menu will be shown.
Quantum—DVD Manual Rev A
35/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
SEARCH RESULT
DATE/HOUR 11-12-204/07
MIN 0
12
24 36
48
▲
CH1
CH2
CH3
CH4
The area, which has data, will be shown in white and using “SEL”, user can start the playback.
Back Up
1. INTERNAL
BACKUP
BACKUPDEVICE: CD/DVD-R
DEVICE FORMAT
FILE FORMAT: EXCLUSIVE/AVI
FROM: 12-07-2004 12:46:30
TO
:12-07-2004 12:47:30
CHANNEL : 1
CALCULATING BACKUP SIZE
TRANSFER
FREE/TOTAL SPACE
REQUIRED SPACE
49M/245M
60M:
Backup Device
Internal CD-R or DVD-R is available.
> Note:
1. Manufacturer guarantee
1) CD-R drive: LG GCE 8527B(CD-R Disk: Imation or Melody brand, 52x Max)
2) DVD-R drive: LG GSA-4167B (DVD-R disk: Imation or Melody brand, 8x Max)
2. When DVR system try to read disk or drive, “ READING OPTICAL MEDIA” message will be
shown and no key buttons works.
Quantum—DVD Manual Rev A
36/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Device Format
Format for CD/DVD-R is not needed. When use CD/DVD-RW, format should be done first.
File Format
Exclusive or AVI file is available. AVI file is played with window media player (Codec required) and
exclusive file will be played with our own player. Player is downloaded automatically together with
video data.
From/ To
You can set up the time, which is required to be backed up to the internal CD/DVD-R Drive.
Channel
When you select exclusive, all channels can be downloaded at the same time. But, if you select AVI
only one channel can be selected.
Transfer
Downloading the backup data to internal disk. Percentage during downloading will be shown.
> Note:
Network should be disconnected during downloading to internal DVD/CD-R disk. If network is
connected, connection will be terminated during "making backup file"
2. EXTERNAL
When a Memory stick is connected to the USB port, the icon
Monitor. Also, the following menu will be shown.
BACKUP
BACKUP DEVICE: CD WR /FLASH
DEVICE FORMAT
FILE FORMAT: EXCLUSIVE/AVI
FROM: 12-07-2004 12:46:30
TO
:12-07-2004 12:47:30
CHANNEL : 1
CALCULATING BACKUP SIZE
TRANSFER
FREE/TOTAL SPACE
REQUIRED SPACE
Quantum—DVD Manual Rev A
49M/245M
60M:
37/86
will be shown at the bottom of
MPEG4-4/8/16Channel - Installation/ Operation Manual
Backup Device
USB memory stick (thumbs drive) or internal CD RW is available.
Device Format
To back up the data, please delete existing files on the stick first.
File Format
Exclusive or AVI file is available. AVI file is played with window media player (codec required) and
exclusive file will be played with our own player. Player is downloaded automatically together with
video data.
From/ To
You can set up the time, which is required to be backed up to the memory stick.
Channel
When you select exclusive, all channels can be downloaded at the same time. But, if you select AVI
only one channel can be selected.
Transfer
Downloading the backup data to stick. Percentage during downloading will be shown.
* USB compatibility has been tested successfully for these recommended USB devices.
Lexar JumpDrive
128/256MB
SanDisk Mini Cruzer 128MB, SanDisk Cruzer Micro 256MB
DVD/RW Plextor PX-716UFL
CD/RW Freecom Classic CD-RW 52x24x52
Lite-On CD/RW (LTR-52327SX)
Western Digital Essential 80GB USB2.0 7200RPM (Manu codeWDXUL800BBNU) they do
this in various HDD sizes unfortunately we have not tested them all.
NOTE
For system stability, we highly recommend that the recording is turned off during downloading
the data to USB device.
Quantum—DVD Manual Rev A
38/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Procedure for saving data onto a USB device.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Stop recording. Press “Record” enter Password (00000000) Default
Insert USB device. Wait until USB symbol appears on screen
Press “Search” button
Go to “Backup” Press “Enter”
Select “File Format” Press “Enter” change to “Exclusive”
Select Start & Stop times (Press “Enter” to change, use camera buttons) Press “enter”
Enter channel numbers (cameras 1,2,3 or 4) Select “Save & Exit”
Select “Calculate Backup size”
Select “Transfer” after file download
Exit “Search” mode
Press “Record” button
“Exclusive” allows all cameras to be selected and recorded.
“AVI” allows single camera only to be selected and recorded.
PC Playback
1.
2.
3.
4.
5.
6.
Insert USB device
Go to “My Computer”
Double Click USB drive letter
Folders & Files on device: Download, BK_Play, Index, Kerberos, KW Client
Double Click “BK_Play”
Player opens, click “play” button
Quantum—DVD Manual Rev A
39/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
5. CLIENT PROGRAM
5-1. Network Connection
Minimum PC specification (4, 8/16CH)
CPU: 4CH- Pentium III 750MHz over,
8/16CH- Pentium
1.7GHz over.
Graphic Memory: 4CH- 32M over,
8/16CH – 64M over.
IP Insertion
Connection will be done by just writing DVR IP address on the Internet Explorer window. If
domain is kept to reach DVR by DDNS server, it is allowed to write domain name directly.
Downloading ActiveX Control
When DVR connects network, the window to download active X control will be displayed then
login Box will be displayed.
If downloading does not begin “Active X control” may not be enabled. (See Appendix 3)
Log In
When Log- In window appears, input the ID & Password.
Then, click “OK”, which starts the live monitoring. If ID &
PW is input wrong, the Login box appears repeatedly.
If it login fails or clicking “Cancel”, the programs ends.
Live Monitoring
Client program is optimized on the resolution, 1024 x 768.
Channel Button
This shows how many channels are activating
on the live monitoring or playback. When
selecting the relevant channel, it will show a
full, single image only and the camera button
will go green.
Channel Division
Multi-channel division will be done during the monitoring or playback. As
seen in picture, 1,4,8,9,16 division is supported.
Quantum—DVD Manual Rev A
40/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Termination of Live monitoring
Live monitoring will be terminated when user pushes “Live Off” button.
Live monitoring will be re-started when user pushes “Live On” button.
System & Local
System means the DVR.
Local means Remote PC as client
Recording & Playback
Step backward / Backward / Play / Pause / Recording /
Stop / Step forward in left order.
One more click during playback makes speed
double. Pause is temporary stop. If user wants to play the
video forward during reverse, push the stop key and
then push fast forward button.
Quantum—DVD Manual Rev A
41/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
System & Local recording
1) System recording
To start the recording on the DVR via client PC, press
the recording button, when the system icon is on green.
Shadow bottom is shown as seen in blue circle. Please
check system is on the recording mode.
* Admin only can control ‘recording on/off’ on the
system via network.
NOTE :
To off ‘recording’, push the red recording button again.
Then, shadow bottom will disappears and system will
ask for the password. To stop recording of system, please
input password. And, check if the system is out of
recording mode.
2) Local recording
To save the live video onto client PC HDD, press the
recording button when the local icon is on green.
Shadow bottom is shown as seen in blue circle. Then,
recording data is saving on the client HDD.
* Both admin and user can do local recording.
To off the recording, press recording button again. Then,
shadow bottom will disappears.
Quantum—DVD Manual Rev A
42/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Local playback
When “Local” button is activated (
will operate.
), it
When you push the Play ( ),
the window left is shown.
On clicking the “OK” button then set the start &
end time. Please check either ‘Download’ or ‘Live
Backup’.
Download is transmitting recorded data from
system HDD to Client PC .
Live Backup is saving the live image on the client
PC.
On clicking the “OK” button, the available list will
be displayed.
Quantum—DVD Manual Rev A
43/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Select the required time and push ‘start’ button.
Then, local playback will be done as above.
Quantum—DVD Manual Rev A
44/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Remote playback
This works when system button is in (
green.
When youpush the Play button( ),
the window left is shown. After input “start”
and “end” time, push “OK” button.
Then, list will be shown above.
Quantum—DVD Manual Rev A
45/86
)
MPEG4-4/8/16Channel - Installation/ Operation Manual
Select the required time and push ‘start’ button.
Then, remote playback will be done as above.
Quantum—DVD Manual Rev A
46/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Setup
Setup menu is composed of 1) Remote Setup
2) Local Setup 3) Firmware Upgrade menu.
Remote setup
Note:
When the main system is entered “menu OSD”,
remote setup doesn’t work. “OSD updating
failure” message will be displayed. This is only
available when logged on as Administrator
When you select ‘Remote Setup’ menu,
User enters ‘Display Set’ menu, in which user can
input ‘Camera name’ as per setting up at the
DVR. To save changed values, you should press
button “Save & Exit” .
When user selects ‘Recording Set’ menu, this has
3 sub-menu’s.
1) Basic Configuration. : you can configure (1)
Audio Recording (2) Repeat Recording (3)
Watermark Embedding (4) Recording Resolution
as per setting up at the DVR.
2) Recording Group : this has 4 sub-menu , (1)
Normal (2) Alarm (3) Motion (4) Schedule as per
setting up at the DVR
3) Recording Priority : User can select the
recording priority.
Quantum—DVD Manual Rev A
47/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
From ‘System Set’ menu, PTZ Camera & Schedule Backup menu are unavailable for 4
8,16channel (Future development). Others are the same as local system configuration.
User
User
From ‘Event Set’ menu this has 1) E-Mail registration 2) E-Mail report 3) Notification out. The
menu is same as local menu tree.
Quantum—DVD Manual Rev A
48/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Local setup
The detail left will be shown when you click the
‘Local Setup’ menu.
1) Draw Mode: User can select between YUV
format using Direct X or RGB.
2)Date Format:
Select the time/ date format .
3)Save Format: Select the saving file format
from JPEG or BMP.
4) OSD:
(1) CH1, CH2, …
(2) Size :
Actual video size.
NTSC - 720x240, 360x240,
PAL – 720x288, 360x288
(3)Speed: Playback Speed
(4)Rate : Frame number per sec.
(5)Mode: Live(Live monitoring) /
R-Play(Remote play) /
L-Play(Local play)
Quantum—DVD Manual Rev A
49/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Firmware Upgrade
When user selects ‘Firmware Upgrade’ menu, if
higher version exits in C:\KWClient\Upgrade
folder, ‘New Program Found!’ message will be
shown
If version is not higher in C:\KWClient\Upgrade
folder,
‘New Program Not Found’ message will be
displayed.
When ‘New Program found’ message is
displayed, please push ‘Upgrade’ button. When
user press’s ‘Cancel’ button, ‘Firmware Upgrade
Fail’ message is shown.
Note : For system stability, please “stop” the
system from Recording.
Quantum—DVD Manual Rev A
50/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
When firmware Upgrade is done successfully,
‘Firmware Upgrade success!’ message will be
displayed.
The local system should be re-booted.
Quantum—DVD Manual Rev A
51/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Download, Image Save, Two-Way audio, Stop, Connect
Download
This is for transmitting the recorded data on HDD to client PC.
When ‘download’ button is pushed,
User select ‘Start time’ and ‘End time’ to download and push ‘OK’ button.
Quantum—DVD Manual Rev A
52/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Select the number (time) from list for ‘Start Time’.
Select the number (time) from list for ‘End Time’.
Quantum—DVD Manual Rev A
53/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Processing bar will be shown above please wait till downloading is finished.
When downloading is finished,
push ‘Local’ button, which turns to green
(
) colour.
Then, push play( ) button.
Select ‘Start Time’ & ‘End Time’ and check ( )
‘Download’.
Quantum—DVD Manual Rev A
54/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Then, the download list left will be shown.
Select the number (time) which you want to
play.
Local Play (from downloaded files) will be done like above.
Quantum—DVD Manual Rev A
55/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Image Save
This is for saving format. Either JPEG or BMP. The file will be stored C:\KWClient\Save.
Stop
This is for stopping Downloading.
Connect
Re-connecting when access has failed
Pan/Tile, Zoom/Focus, OSD
1) Pan / Tilt
Using arrow key, controls the Pan/Tilt (Not supported at present)
2) Zoom / Focus
Using arrow key, controls Zoom, Focus (Not supported at present)
3) OSD
Whether OSD is displayed during live / playback
Log / Event / Info / Status
The relevant information like Log, Event, Info, Status will be
shown as below.
Quantum—DVD Manual Rev A
56/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Event Clear
The relevant OSD turns to green colour when DVR has an event like Alarm, Motion,
Video-loss.
Reset for event button (event clear)
Timer
This shows the client PC timer when monitoring is working.
On the other hand, it shows the time the recording data belongs to during
playback. The timer format is according to date format specified on the “local Setup”.
Exit
Quantum—DVD Manual Rev A
57/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Q&A
1.
Q : The message “ Can’t display the page” is shown and failed to connect to DVR, when
IP address or domain name is entered on the Internet explorer window.
A:
1) DVR is not working or 2) a problem on the network connection. Please check the DVR is
working properly also check the connection both DVR and PC.
2.
Q:
Can’t download the ActiveX Control.
A:
This happens if “Windows XP Service Pack 2” is installed on the PC. Either remove “service
pack 2” on the PC Menu, “program add & removal” on the control panel. Or, refer to Appendix
3 (See page 65)
3.
Q:
The client program is terminated with the message “Unsupported OS version!”
A:
The client program only works with Windows XP or 2000. Doesn’t support Win.98, 98SE, ME.
4.
Q:
Login box keeps appearing.
A:
It appears repeatedly when Client ID & Password is input wrong. Please check the exact ID &
Password set on the DVR.
5
Q:
Can’t change “Draw mode” on the menu, Local setup.
A:
This is not possible during live monitoring and playback. User must stop
the live monitoring or playback. Then, you can change the “Draw mode”.
6.
Q:
Where is the saved file located?
A:
This is stored “C:\KWClient\Saved”. The file can be played with Image viewer.
Quantum—DVD Manual Rev A
58/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
7.
Q:
There is no response after pushing the OSD button.
A:
OSD is showing several statuses during playback. If the detail items are not specified on the
“Local Setup”, there is no response even if pushing the OSD button during playback. Try it
after selecting required OSD menu on the Local Set-up.
8.
Q : I can’t see the back up file made from a DVR on the monitor.
A : Please check whether you have a Codec S/W or not. If you don’t have, you have to install it in
your PC.
9.
Q : When I downloaded the image as AVI on to my memory stick, it plays back ok, but no date & time
A : Date & time is not supported when using AVI mode (window media player Codec required) this
is only supported when back up is carried out using Exclusive mode.
10.
Q : I can see the display web layout on the monitor but no video pictures.
A1 : Please check your PC specification needs to be Minimum Pentium III 750MHz and Graphic
Memory 32M.
A2 : Please, go to control panel -> Internet options -> security -> select Customer Level.
Go to ActiveX controls and plug-ins -> Automatic prompting for ActiveX Controls => Disable"
Go to Download unsigned ActiveX controls => Prompt"
Go to Miscellaneous -> Allow script-initiated windows without size or position constraints" =>
Enable" (see Appendix 3)
Quantum—DVD Manual Rev A
59/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Appendix 1.
1. HDD INSTALLATION
1) Components
The attached components are as follows,
0.8“ Round Screw : 4
0.6“ Round Screw : 2
Left Complementary Device : 1
40 Pin Connector Cable : 1
HDD Power Connector Cable : 1
2) Inner Configuration
The inner configuration of DVR is as follows,
REAR
2
7
5
6
1
3
8
9
4
HDD
Quantum—DVD Manual Rev A
60/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
0.8“ Round Screw
0.6“ Round Screw
Left Complementary Device for fixing the HDD
HDD
40 Pin Connector
HDD Power Connector
KERBEROS Main Board
HDD Power Cable
HDD Connector Cable
2. HDD Install Processing
Assemble the HDD with the Left Complementary Device using 0.8“ Round Screw
Fix the Left Complementary Device with 0.6“ Round Screw to Main Body
Fix the Right Part of HDD with 0.8“ Round Screw to Main Body
Assemble the HDD Cable and HDD Power Cable each others
Quantum—DVD Manual Rev A
61/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Appendix 2
SENSOR INSTALLATION
1. Components
1) External Sensor : 1 (You should prepare one set)
2) DVR System : 1
2. Inner Circuit for Sensor Input
The inner circuit of Mpeg 4 DVR is as follows,
DVR
12V DC
5V DC
2.2k
2.2k
Internal Check Point
0.1uF
PC817
SENSOR IN
Outlet Point
GND
PC817 : Photo Coupler
The Specification of PC817
Quantum—DVD Manual Rev A
62/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Absolute Maximum Ratings
Parameter
Forward current
*1Peak forward current
Input
Reverse voltage
Power dissipation
Collector-emitter voltage
Emitter-collector voltage
Output
Collector current
Collector power dissipation
Total power dissipation
*2Isolation voltage
Operating temperature
Storage temperature
*3Soldering temperature
*1 Pulse width<=100 s, Duty ratio : 0.001
*2 40 to 60% RH, AC for 1 minute
*3 For 10 seconds
Symbol
IF
I FM
VR
P
V CEO
V ECO
IC
PC
P tot
V iso
T opr
T stg
T sol
Rating
50
1
6
70
35
6
50
150
200
5 000
-30 to + 100
-55 to + 125
260
Unit
mA
A
V
mW
V
V
mA
mW
mW
V rms
°C
°C
°C
Electro-optical Characteristics
Input
Output
Transfer
characteristics
Parameter
Forward voltage
Peak forward
voltage
Reverse current
Terminal
capacitance
Collector dark
current
*4Current transfer
ratio
Collector-emitter
saturation voltage
Symbol
VF
MIN.
-
TYP.
1.2
MAX.
1.4
Unit
V
IFM = 0.5A
-
-
3.0
V
IR
V R =4V
-
-
10
µA
Ct
V = 0, f = 1kHz
-
30
250
pF
V CE = 20V
-
-
10 -7
A
50
-
600
%
-
0.1
0.2
V
1011
-
Ω
0.6
1.0
pF
-
80
-
kHz
-
4
18
µs
3
18
µs
V FM
ICEO
CTR
V
CE( sat)
Isolation resistance
R ISO
Floating capacitance
Cf
Cut-off frequency
fc
Response
time
Quantum—DVD Manual Rev A
Rise
time
Fall
time
tr
tf
63/86
Conditions
IF = 20mA
IF = 5mA, V CE =
5V
IF = 20mA, I C =
1mA
DC500V, 40 to 60%
RH
V = 0, f = 1MHz
V CE = 5V, I C =
2mA, R L = 100 W, 3dB
V CE = 2V, I C =
2mA, R L = 100 Ω
5x
1010
-
-
MPEG4-4/8/16Channel - Installation/ Operation Manual
3. SENSOR Install Processing
Please refer the below block diagram.
AC
SENSOR
DVR
12V DC
?? V DC
2.2k
N.C
3.3k
Or 10k
PC817
SENSOR IN
Outlet Point
GND
Quantum—DVD Manual Rev A
64/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Appendix 3
INSTALLING VISTA WEB CLIENT ON WINDOWS XP SERVICE PACK 2.
1) Security Setup
Tools-> Internet Options-> Security
-> Select “Customer Level”
Select “ Allow script-initiated windows without
Size or position constraints”-> Enable.
Quantum—DVD Manual Rev A
65/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Select “ Download
controls”-> Prompt
unsigned
Active
X
Select “ Automatic Prompting for Active X
controls”-> Disable
Quantum—DVD Manual Rev A
66/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
2) Connection
Click here as described
Select “ Temporary Allow
Pop-ups or Always Allow from
this site”
Click “ To help protect security,
Internet Explorer stopped this site
from installing an Active X control
on your computer. Click here for
options…”
Quantum—DVD Manual Rev A
67/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Select “Install Active X Control “
Select “Install” and then ‘Log-In’ box
will be shown.
Quantum—DVD Manual Rev A
68/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Appendix 4
DYNAMIC IP (Supporting DDNS Server)
1. Visit http://www.dyndns.com/services/dns/ to get the DDNS user ID & PW as well as domain
name.
2. Click “Dynamic DNS” menu.
Quantum—DVD Manual Rev A
69/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
3. Select “How To” menu.
Quantum—DVD Manual Rev A
70/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
4. Select “account” menu.
Quantum—DVD Manual Rev A
71/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
5. Mark “I have read and agree to the Acceptable Use Policy above”
6. Input “Username” & “Password”.
(For exam. Username: example, PW: quantumdvr)
example
Check account registration is done successfully.
Quantum—DVD Manual Rev A
72/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
7. Select “ Add Host Form” to create the domain name.
8.
1) Input “Hostname”. Hostname is the same one as “username” (for exam: example)
2) You should select “ dyndns.org” from the drop down menu, which is limited on our system.
3) Current dynamic IP will be shown below
4) After checking 1)~3), select “Add Host”
5) After registering hostname, check the ping status (ping –t example.dyndns.org)
Quantum—DVD Manual Rev A
73/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
example
9.
To connect DVR system, the followings-XDSL ID & PW / DDNS ID & PW/ Registered Domainhave to be input on the “Network set” menu.
NETWORK SET
USE DYNAMIC IP: YES
XDSL USER ID :
XDSL PASSWORD :
DDNS USER ID :
DDNS PASSWORD :
REGISTERED DOMAIN:
SAVE AND EXIT
Quantum—DVD Manual Rev A
74/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Appendix 5
SETUP FOR DVR PORT/ WEB SERVER PORT USING IP SHARING ROUTER
NETWORK SET
USE DYNAMIC IP: NO
IP ADDRESS :000.000.000.000
GATEWAY
:000.000.000.000
NETMASK
:000.000.000.000
DNS SERVER :000.000.000.00
DVR PORT
2000
WEBSERVER PORT 2001
SAVE AND EXIT
1) To use IP sharing Router, “Use Dynamic IP” should be set to “ No” first.
- DVR Port: Port number to connect network client program on remote PC. When it needs to
be changed, number which is not overlapped should be input (2001~65535)
- Web Server Port: Port number to download network client program to remote PC. When it
needs to be changed, number which is not overlapped should be input (2001~65535)
2) Setup “virtual server” on IP sharing Router
It is for setting virtual server to forward IP, which is allotted to DVR.
For exam.)
DVR 1
IP: 192.168.0.11, DVR Port: 2500, Web Server Port: 2501
DVR 2
IP: 192.168.0.12, DVR Port: 2600, Web Server Port: 2601
If two sets of DVR are configured above, the virtual server on IP sharing router is as follows.
(1) PC Server Name: DVR1-1 (192.168.0.11)
Protocol: TCP, Internal Port: 2500, External Port: 2500
PC Server Name: DVR1-2 (192.168.0.11)
Protocol: TCP, Internal Port: 2501, External Port: 2501
(2) PC Server Name: DVR2-1 (192.168.0.12)
Protocol: TCP, Internal Port: 2600, External Port: 2600
PC Server Name: DVR2-2 (192.168.0.12)
Protocol: TCP, Internal Port: 2601, External Port: 2601
Quantum—DVD Manual Rev A
75/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
* For more detail, please refer to relevant IP sharing manual.
(3) ‘DDNS’ Setup on IP sharing router
DDNS configuration is no needed in case of fixed IP.
(4) Address and port number input on the Internet explorer window.
Please input the following format, http://address:web server port. If the system is on the dynamic IP
environments and the address configured (3) is abc.dyndns.org and the same address and port is
designated like (2),
To connect DVR1, http://abc.dyndns.org:2501, to connect DVR2, http://abc.dyndns.org:2601.
Quantum—DVD Manual Rev A
76/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Appendix 6
MAKING PARTITION ON EXTERNAL USB HDD
To back up to USB HDD, the USB HDD should be formatted first on PC. We are supporting FAT32
file system of which maximum size is 30GB at one partition. Please refer to the following procedure to
make a partition and format on PC.
1. Select Control panel-> administrative Tools.
Quantum—DVD Manual Rev A
77/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
2. Select “Computer Management”
3. Select “Disk Management”.
Quantum—DVD Manual Rev A
78/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
4. Click right mouse button and select “New Partition”.
5. Follow “New Partition Wizard” procedure as below.
Quantum—DVD Manual Rev A
79/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
6.
7. Maximum is 30GB at FAT32 file format.
Quantum—DVD Manual Rev A
80/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
8.
9.
Quantum—DVD Manual Rev A
81/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
10. At this stage, New Partition has been made.
11.Check New partition was created correctly. (Format will be executed automatically)
Quantum—DVD Manual Rev A
82/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
12. Check New Partition was created correctly
Quantum—DVD Manual Rev A
83/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Appendix 7
SPECIFICATION
Model
Quantum DVR Series
Video Audio
Camera input (NTSC / PAL)
Quantum4-DVD
Output
Audio input
1 BNC, 1S-Video
1RCA
Output
Display
Recording
NTSC
PAL
Playback
Water marking & scrambling
Display
Search mode
Network
Backup
Speed
Device
HDD Sizes (GB)
Still image capture & save
Network interface
Protocol
Serial communication
Application
Web browser
Event transport
Interface
Back-up device
Quantum—DVD Manual Rev A
1 BNC, 1S-Video, VGA
4 RCA
4 In / 1 Out
Embedded Linux
Speed
Resolution (pixel)
Split screen
Compression
Resolution (pixel)
Picture quality
Mode
Priority
Total
NTSC/PAL
Each
channel
Quantum16-DVD
1 RCA
Sensor in (N/C, N/O) /Alarm out
Operating system
Speed
Quantum8-DVD
120fps
240fps
480fps
720*480, 260*20(NTSC)/ 720*288, 360*288(PAL)
1,4 sequence
1,4,6,8 sequence 1,4,6,8,16 sequence
MPEG4
720*480, 260*20(NTSC)/ 720*288, 360*288(PAL)
3 STEPS, (Low, Medium, High)
Normal. Motion. Alarm. Sequence
Alarm→ Motion→ Sequence→ Normal
60fps(720*240), 120fps(360*288) / 50fps(720*288), 100fps(360*288)
30fps(360*240)
15fps(360*240)
7.5fps(360*240)
15fps(720*240)
7.5fps(720*240)
3.75fps(720*240)
25fps(360*288)
12.5fps(360*288)
6.25fps(360*288)
12.5fps(720*288)
6.25fps(720*288)
3.125fps(720*288)
Propriety Algorithm
1, 4
1,4,8
1,4,8,16
Date, Time, Calendar
Normal.Rew.FF. (Recorded speed *2, *4, *16) Frame to Frame,
Pause
Internal HDD
80,160 & 250
160,250 & 500
JPEG compression or AVI Format & USB (memory stick)
Ethernet
TCP/IP, SMTP, HTTP, DHCP, PPPOE (ADSL)
No
RS-232 1each, RS-485 1each
Windows 2000 / XP (Client system)
Internet Explorer ≥ 5.0. (DVR’s control or viewing)
When event occur, set to send E-mail
USB 2.0
External USB HDD, internal DVD-RW, Network Backup, Memory
stick
84/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Motion detection
Each control/channel
Sensitivity: 3step for each channel
Control
Area:
Alarm hold time
Event log
Remote controller
Pan/Tilt camera
HDD
Power source
Power supply capability:
Others
Operating temperature
Relative humidity
Net
Weight
Gross (box)
Net
Dimension
Gross (box)
Individually programmable motion detection area for
each camera.
5 ~ 240 seconds
256 event (alarm, motion, video & power loss & record On/Off)
IR remote controller (32)
No
RS-485 interface
Two HDD’s max.
100 ~ 240V AC. 50 ~ 60Hz.
60W
250W (AC current ≤ 500mA)
5 ~ 40oC (41 ~ 104oF)
Maximum 80% Non-condensing
4.0Kg
6.0Kg
5.0Kg
7.0Kg
350(w)*250(d)*70(h)
450(w)*370(d)*90(h) mm
400(w)*340(d)*170(h)
500(w)*460(d)*190(h) mm
Design and product specifications subject to change without notice
Quantum—DVD Manual Rev A
85/86
MPEG4-4/8/16Channel - Installation/ Operation Manual
Vista
Norbain House
Eskdale Road
Winnersh Triangle
Berkshire
RG41-5TS
Tel:
+44 (0) 1189 944 0123
Fax:
+44 (0) 1189 944 0999
www.vista-cctv.com
Quantum—DVD Manual Rev A
86/86