PRELIMINARY

ETC®
Source Four LED Series
N
I
M
I
L
E
R
P
Y
R
A
Source Four LED™ Series 2
G E N E R A L I N F O R M AT I O N
O R D E R I N G I N F O R M AT I O N
The Source Four LED Series 2 is the evolution of LED lighting.
While it may look the same on the outside, the Series 2 offers even
more of what makes the Source Four LED the best LED profile
available. With optimized arrays and finely-tuned electronics, the
Series 2 offers a combination of light quality and output that cannot
be matched.
Source Four LED Series 2 Light Engine with Shutter
Barrel
(For use with fixed-field lens tubes only)
Source Four LED Series 2 Lustr® luminaires are based on the x7
Color System™, utilizing seven colors including high-output lime to
achieve true, usable broad-spectrum color with a depth and feel
beyond any RGB fixture.
MODEL
DESCRIPTION
S4LEDS2LS-0
Source Four LED Series 2 Lustr with shutter
barrel, black
S4LEDS2THDS-0
Source Four LED Series 2 Tungsten HD with
shutter barrel, black
S4LEDS2DHDS-0 Source Four LED Series 2 Daylight HD with
shutter barrel, black
Source Four LED Series 2 Daylight HD and Tungsten HD arrays
are designed for broadcast lighting, offering flicker-free operation
and high-definition lighting. With a new mix of LED emitters, the
luminaires’ output is significantly brighter than the original Source
Four LED white-light arrays. The Daylight HD array produces variablecool white (4000 to 6500K) light that imitates natural daylight. The
Tungsten HD array matches conventional tungsten lighting, with
adjustable warm-white (2700 to 4500K) light. They offer tint control,
so they can be tweaked to perfectly illuminate individual skin tones.
Source Four LED Series 2 Light Engine Body
(For use with zoom lens tubes and retrofit of existing fixtures)
Series 2 light engines work with all Source Four lens tubes to deliver
a high-quality, controllable beam of LED light. For the best results, it
is highly recommended that EDLT versions are used. We also offer a
special LED-only version of the 50° lens tube.
MODEL
DESCRIPTION
S4LEDS2L-0
Source Four LED Series 2 Lustr, body only, black
S4LEDS2THD-0
Source Four LED Series 2 Tungsten HD, body
only, black
S4LEDS2DHD-0
Source Four LED Series 2 Daylight HD, body
only, black
Color options: -1 = white, -5 = silver gray/custom colors
Fixture ships with a soft-focus diffuser in a gobo holder and a 1.5m PowerCON™
power-input cable with a connector of choice. See page 2 for connector options.
Please note: Lens tubes to be ordered separately.
1 of 8
ETC®
Y
R
A
N
I
M
S P E C I F I C AT I O N S
I
L
E
Source Four LED Series
S P E C I F I C AT I O N S
GENERAL
• 60-LED array
• ETL listed to UL1573 – the standard for stage and studio
lighting units
• IP20-rated for indoor use
• Power and DMX in/thru connections for easy setup
• User-friendly control interface with multiple modes and
fixture settings
PHYSICAL
• Rugged die-cast all-metal housing
• Available in black (standard), white or silver gray or custom colors (contact factory)
• C-clamp
• Positive-locking double-clutch fixture body
• Slot for glass or stainless steel patterns and soft-focus diffuser
• Wide accessory slot with sliding cover for motorized pattern
devices or optional iris
• Hanging yoke standard. Optional yoke/floor-stand available
ELECTRICAL
• 100VAC to 240VAC 50/60Hz universal power input
• Neutrik power in and thru connections
• Up to nine Lustr or seven Daylight HD/Tungsten HD luminaires (15A max) may be linked via power thru connector (10 Lustr or 8 Daylight HD/Tungsten HD fixtures total per circuit) when used with R20 Relay Module or Unison® Echo™ Relay Panel
-- Consult breaker-trip curves when used with other equipment. Requires power from a non-dim source
• Inrush
-- 120V: 50A (First half-cycle)
-- 240V: 107A (First half-cycle)
LED*
• 20,000-hour LED life (20,000 hours to 70% intensity)
• 60 Luxeon® Rebel LED emitters
R
P
Source Four LED Series 2
CONTROL
• 15-bit virtual dimming engine provides smooth, high-quality
theatrical fades and minimizes color shift during dimming
• RDM functionality for address and setting changes
THERMAL
• Ambient operating temperature of 32° to 104°F (0° to 40°C)
• Active electronic thermal management for
droop-free operation
• Quiet fan cooling
• Fixture is designed for continuous operation up to 104°F
(40°C) ambient temperature and requires free flow of air
around fixture housing
A D D I T I O N A L O R D E R I N G I N F O R M AT I O N
Power Input Cables
Use information below to order 5’ power input leads with factory-fitted connectors
DESCRIPTION
DPA-A
5’ PowerCon to parallel blade U-ground
(Edison) connector
DPA-B
5’ PowerCon to 20A two-pin and ground
(stage pin) connector
DPA-C
5’ PowerCon to grounded 20A twistlock connector
DPA-X
5’ PowerCon to bare-end power input lead
Power Thru Jumpers
Note: Power thru jumpers connect to fixture’s output (thru) connector to provide link
to successive fixtures
MODEL
*See additional LED notes on page four
COLOR
• Exclusive x7 Color System seven-color LED array (Lustr)
• Selection from the x7 Color System to provide high quality, variable-white light
-- Tungsten HD (2700K-4000K)
-- Daylight HD (4000K-6500K)
• Beautifully illuminates skin tones and other objects for
natural appearance and high color rendering
• Broad-spectrum color interacts seamlessly with
conventional sources
• Exclusive optional red-shift option emulates tungsten
dimming performance
OPTICAL
• Use the included soft-focus diffuser for creating washes or
soft light
• Best performance using ETC’s EDLT lens tubes
• Can use all ETC Source Four interchangeable lens barrels: 5°,
10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° field angles, as well
as 19°, 26°, 36°, and 50° EDLT lenses
• For better performance, use the LED 50° barrel
CONTROL
• DMX512 in and thru via five-pin XLR connectors
• Multiple control options, including RGB, strobe, and console free Master/Slave mode
• See DMX Control Table for additional information
MODEL
DESCRIPTION
DPJ-5
5’ PowerCon-to-PowerCon fixture-to-fixture jumper
DPJ-10
10’ PowerCon-to-PowerCon fixture-to-fixture jumper
Diffusers
MODEL
DESCRIPTION
S4LED-SFD
Source Four LED - Soft Focus Diffuser (included)
S4LED-SWD6
Source Four LED - Smooth Wash Diffuser for
6.25” gel frame slots
S4LED-SWD7
Source Four LED - Smooth Wash Diffuser for 7.5”
gel frame slots
S4LED-SWD12
Source Four LED - Smooth Wash Diffuser for 10°
lens tubes
S4LED-SWD14
Source Four LED - Smooth Wash Diffuser for 5°
lens tubes
The Soft Focus Diffuser fits into a standard A-Size pattern holder and delivers
beautiful homogenized light when not in sharp focus. Also, use with patterns for
dappled and soft-edge projections.
The Smooth Wash Diffuser is used when extra-smooth blending of multiple Source
Four LED fixtures is required. The smooth wash diffuser is placed into the gel-frame
slot of the lens tube.
2 of 8
ETC®
Source Four LED Series 2
Y
R
A
N
I
M
Source Four LED Series
F I X T U R E C O M PA R I S O N - L U S T R
• The data below was measured on a Source Four LED Series 2 Lustr and a Source Four LED Lustr+, both in Regulated mode. Gel colors shown are standard selections from the Rosco Labratories Inc. and Lee Filters catalogs.
I
L
E
R
P
5600K
3,952 (81 Watts)
3,136 (99W)
3000K
5,309 (111W)
2,726 (84W)
7,489 (575W)
1,118 (33W)
647 (28W)
L179
Chrome Orange
L010
5,182 (105W)
895 (36W)
Medium Yellow
831 (30W)
575 (22W)
873 (575W)
L106
Primary Red
R05
4,181 (97W)
2,031 (74W)
Rose Tint
L194
3,227 (106W)
2,978 (91W)
1,643 (575W)
Surprise Pink
5,636 (575W)
5,043 (127W)
3,160 (98W)
3,853 (575W)
R54
Special Lavender
L019
Fire
1,103 (36W)
795 (30W)
1,723 (575W)
R08
1,859 (71W)
Pale Gold
R89
L213
Source Four LED Lustr+
Source Four 575WX
4,803 (106W)
5,955 (575W)
2,962 (75W)
698 (38W)
Moss Green
2,621 (575W)
5,838 (144W)
2,082 (67W)
White Flame
Green
Source Four LED Series 2 Lustr
6,026 (575W)
641 (51W)
743 (45W)
353 (575W)
R80
Primary Blue
L202
3,186 (95W)
4,324 (575W)
Half C.T. Blue
5,801 (150W)
1,234 (43W)
938 (37W)
L328
1,771 (575W)
Follies Pink
R3314
4,926 (112W)
2,352 (83W)
Minusgreen
0
1,000
2,000
3,000
5,952 (575W)
4,000
5,000
Lumens
3 of 8
6,000
7,000
8,000
ETC®
Source Four LED Series 2
Y
R
A
Source Four LED Series
N
I
M
F I X T U R E C O M PA R I S O N - D AY L I G H T H D A N D T U N G S T E N H D
• The data below was measured on a Source Four LED Series 2 Daylight HD and Tungsten HD against a Source Four LED Series 1 Studio HD, Studio Daylight and Studio Tungsten. All in Regulated mode.
I
L
E
R
P
10000
Series 2 Daylight HD
9000
8000
LUMENS
Series 2Tungsten HD
7000
6000
Studio Daylight
Studio Tungsten
5000
4000
2700
Series 1 Studio HD
Series 1 Studio HD
3200
3700
4200
4700
5200
5700
6200
COLOR TEMPERATURE
98
96
94
CRI
92
90
88
86
84
2700
3200
3700
4200
4700
Tungsten HD
5200
Daylight HD
COLOR TEMPERATURE
4 of 8
5700
6200
ETC®
Y
R
A
IN
PREFERRED LENSING OPTIONS
M
I
L
(Lenses sold separately)
Fixed Beam Lenses
RE
DESCRIPTION
LED50LT
LED-specific 50° EDLT with lenses installed
LED50LT-1
LED-specific 50° EDLT (white) with lenses installed
436EDLT
36° EDLT w/lens installed
436EDLT-1
36° EDLT (white) w/lens installed
426EDLT
26° EDLT w/lens installed
426EDLT-1
26° EDLT (white) w/lens installed
419EDLT
19° EDLT w/lens installed
419EDLT-1
19° EDLT (white) w/lens installed
490LT
90° w/lens installed
490LT-1
90° (white) w/lens installed
470LT
70° w/lens installed
470LT-1
70° (white) w/lens installed
414LT
14° w/lens installed
414LT-1
14° (white) w/lens installed
410LT
10° w/lens installed
410LT-1
10° (white) w/lens installed
405LT
5° w/lens installed
405LT-1
5° (white) w/lens installed
A D D I T I O N A L O R D E R I N G I N F O R M AT I O N
MODEL
DESCRIPTION
400CC
C-Clamp (included)
400SC
Safety Cable
400PH-A
Pattern holder (A size)
400PH-B
Pattern holder (B size)
400PH-G
Glass pattern holder
400RS
Drop-In Iris
400CF
Color frame (6.25”)
407CF
7.5” square color frame
400DN
Donut
400TH
Top Hat
400HH
Half Hat
DPSJ-X
25’ PowerCon to Edison input power cable with
inline switch
NOTES ABOUT LED LUMINAIRES
All LED sources experience some lessening of light output and some
color shift over time. LED output will vary with thermal conditions.
Based on the LED manufacturer’s B50 L70 specification, a Source
Four LED Series 2 luminaire will achieve ~70% of its initial output
after 20,000 hours of typical usage. In individual situations, LEDs
will be used for different durations and at different levels. This
can eventually lead to minor alterations in color performance,
necessitating slight adjustments to presets, cues or programs.
Zoom Lens Assemblies
Use with light-engine body models.
MODEL
DESCRIPTION
41530LT
Source Four 15-30° Zoom lens assembly
42550LT
Source Four 25-50° Zoom lens assembly
C R I A N D C Q S R AT I N G S
Source Four LED fixtures were evaluated for CRI and CQS
performance using measured output spectrum and optimized mix
solutions for a best spectral match to black body sources at 3200K
and 5600K.
Power Consumption at Full Capacity
MODEL
Source Four LED Series
Fixture Accessories
MODEL
P
Source Four LED Series 2
VOLTAGE
(V)
CURRENT
(A)
MAX
POWER (W)
Source Four LED
Series 2 Lustr
120
1.44
171
Source Four LED
Series 2 Tungsten
HD
120
1.76
208
Source Four LED
Series 2 Daylight
HD
120
2.08
246
FIXTURE
CRI
CQS
Color
Fidelity
Duv
Source Four LED Series 2 Lustr
Reg at 3200K
86
88
88
0
Source Four LED Series 2 Lustr
Reg at 5600K
90
91
91
0
Source Four LED Series 2
Tungsten HD Reg at 3200K
96
xx
xx
xx
Source Four LED Series 2
Daylight HD Reg at 5600K
92
xx
xx
xx
All Source Four LED luminaire versions provide excellent color
rendering to the eye, particularly at higher color temperature
settings, such as 5600K. In most cases, the Duv is 0.000. A Duv
rating of 0.000 indicates that the color mix used is exactly on the
black body line, with no green or magenta tint.
5 of 8
ETC®
CONTROL OPTIONS
Y
R
A
IN
M
I
L
P
Source Four LED Series
LUSTR CONTROL OPTIONS
User settings on Source Four LED Series 2 fixtures allow multiple
operational modes and settings for either console operation via DMX
protocol or stand-alone operation. The expanded LCD display provides
easy navigation to all possible settings and options. Some of the
setting options are:
• Multiple DMX choices ranging from a simple RGB
profile – which effectively controls all seven LED colors via
three channels – to nine-channel ‘direct’ color and
intensity control
• Multiple dimming curve options
• Preset colors and sequences for stand-alone (no console
required) operation
• White point selection – white light and color behavior based
on a specific color-temperature white light, i.e. 3200K,
5600K, etc.
• Loss of data behavior options – instant off, hold last look for
two minutes, etc.
• Output modes – three output options that offer you a choice between maximum output and maximum consistency
See the user manual for a complete explanation of all of the control
settings and options for the Source Four LED Series 2.
RE
Source Four LED Series 2
DMX Input Channel Profiles
DMX
Profile
DMX
Channels
Direct
10
1 – Red
2 – Lime
3 – Amber
4 – Green
5 – Cyan
6 – Blue
7 – Indigo
8 – Intensity
9 – Strobe
10 – Fan Control
HSI
6
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Fan Control
High-resolution hue (two channels),
saturation, and intensity control.
HSI mode will produce color
crossfades around the color space.
HSIC
7
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Fan Control
7 – Color Point
(CCT)
High-resolution hue, saturation and
intensity control as above, with the
addition of a color- point channel to
adjust the color temperature of the
fixture in both white light and color.
Color crossfade performance is the
same as HSI.
RGB
6
(Ch. 4
not used)
1 – Red
2 – Green
3 – Blue
4 – n/a
5 – Strobe
6 – Fan Control
Effectively addresses all seven colors
via three channels of control. RGB
profile will produce additive color
crossfades.
Studio
6
(Ch. 4
not used)
1 – Intensity
2 – Color Point
(CCT)
3 – Tint
4 – n/a
5 – Strobe
6 – Fan Control
Controls fixture as a white light
unit. If no DMX, (console input,
for example), is present, the fixture
can be adjusted for these three
parameters on the user interface at
the back of the unit.
Quick Setups
To assist in managing the numerous control and fixture behavior choices, five
combinations of operational settings are available to quickly get started. These
settings are specifically created for different applications and are easily accessible at
the fixture display. Each setting can then be modified as required to take advantage
of all of the possible control features.
Setting
Title
General
Profile
Direct
Description
Typical Features*
Factory Default:
For general-purpose
use, including interior
architectural applications
• Standard dimming curve
• Regulated output for
color consistency
Stage
HSI
Plus 7
Enabled
Theatrical lighting:
Duplicates the color and
dimming behavior of
tungsten stage lighting
fixtures
• Incandescent dimming
curve
• Regulated output for
color consistency
• 3200K white-point setting
XT Arch
HSI
Exterior architectural lighting:
Provides a high degree of
color consistency in high
ambient temperature
environments
• Standard dimming curve
• Protected output
• 3200 white-point setting
High
Impact
RGB
Event lighting:
Enables quickest response,
simple RGB control and
strobe channel for maximum
effect usage
• Quick dimming curve
• Boost mode for
maximum intensity
• 5600K white-point setting
Studio factory default:
Enables three-parameter
control of white light
(intensity, white point, and
tint) via DMX from console
or console-free from fixture
display
• Linear dimming curve
• Regulated output mode
for color consistency
Studio
Studio
Channel
Assignments
Notes
Direct control of each individual
color with a separate masterintensity channel. Color calibration
of LEDs is not active in this mode.
This profile will produce additive
color crossfades.
Additional profile options
Plus 7
Seven additional color-control channels are available in
RGB, HSI and HSIC input-profile settings. For example,
HSI with ‘Plus 7’ enabled becomes a 15-channel profile:
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Fan Control
7 – n/a
8 – Plus 7
Control on/off
9 – Red
10 – Lime
11 – Amber
12 – Green
13 – Cyan
14 – Blue
15 – Indigo
*See user manual for complete list of features for each Quick Setup
Strobe
6 of 8
The desired color and intensity
is achieved by using the HSI or RGB
channels
Placing channel seven at a value
over 51% gives the fixture a
15-channel profile
Channels 9-15 represent the
native colors of the fixture and
allow the operator to adjust
individual color channels to fine
tune the color output
Variable strobe control: 0% is no strobe. The fixture
output will strobe more rapidly as the strobe channel
value approaches 100%.
ETC®
Y
R
A
IN
Source Four LED Series 2
Source Four LED Series
D AY L I G H T H D C O N T R O L O P T I O N S
TUNGSTEN HD CONTROL OPTIONS
DMX Input Channel Profiles
DMX Input Channel Profiles
M
I
L
RE
DMX
Profile
Channel
Assignments
Notes
DMX
Profile
DMX
Channels
Channel
Assignments
Notes
6
(Ch. 4
not used)
1 – Intensity
2 – Color Point
(CCT)
3 – Tint
4 – n/a
5 – Strobe
6 – Fan Control
Controls fixture as a white light
unit. If no DMX, (console input,
for example), is present, the fixture
can be adjusted for these three
parameters on the user interface at
the back of the unit.
Studio
6
(Ch. 4
not used)
1 – Intensity
2 – Color Point
(CCT)
3 – Tint
4 – n/a
5 – Strobe
6 – Fan Control
Controls fixture as a white light
unit. If no DMX, (console input,
for example), is present, the fixture
can be adjusted for these three
parameters on the user interface at
the back of the unit.
Direct
10
1 – Red
2 – Mint
3 – Blue
4 – Indigo
5 – Intensity
6 – Strobe
7 – Fan Control
Direct control of each individual
color with a separate masterintensity channel. Color calibration
of LEDs is not active in this mode.
This profile will produce additive
color crossfades.
Direct
10
Direct control of each individual
color with a separate masterintensity channel. Color calibration
of LEDs is not active in this mode.
This profile will produce additive
color crossfades.
HSI
6
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Fan Control
High-resolution hue (two channels),
saturation, and intensity control.
HSI mode will produce color
crossfades around the color space.
1 – Red
2 – Red Orange
3 – Mint
4 – Blue
5 – Indigo
6 – Intensity
7 – Strobe
8 – Fan Control
HSI
6
High-resolution hue (two channels),
saturation, and intensity control.
HSI mode will produce color
crossfades around the color space.
HSIC
7
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Fan Control
7 – Color Point
(CCT)
High-resolution hue, saturation and
intensity control as above, with the
addition of a color- point channel to
adjust the color temperature of the
fixture in both white light and color.
Color crossfade performance is the
same as HSI.
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Fan Control
HSIC
7
High-resolution hue, saturation and
intensity control as above, with the
addition of a color- point channel to
adjust the color temperature of the
fixture in both white light and color.
Color crossfade performance is the
same as HSI.
RGB
6
(Ch. 4
not used)
1 – Red
2 – Green
3 – Blue
4 – n/a
5 – Strobe
6 – Fan Control
Effectively addresses all seven colors
via three channels of control. RGB
profile will produce additive color
crossfades.
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Fan Control
7 – Color Point
(CCT)
RGB
6
(Ch. 4
not used)
1 – Red
2 – Green
3 – Blue
4 – n/a
5 – Strobe
6 – Fan Control
Effectively addresses all seven colors
via three channels of control. RGB
profile will produce additive color
crossfades.
P
Studio
DMX
Channels
Additional profile options
Plus 7
1 – Intensity
2 – Color Temp
3 – Tint
4 – Strobe
5 – Fan Control
6 – n/a
7 – Plus 7
Control on/off
8 – Red
9 – Mint
10 – Blue
11 – Indigo
Strobe
Additional profile options
Seven additional color-control channels are available in
RGB, HSI and HSIC input-profile settings. For example,
HSI with ‘Plus 7’ enabled becomes a 15-channel profile:
Plus 7
The desired color and intensity
is achieved by using the HSI or RGB
channels
Seven additional color-control channels are available in
RGB, HSI and HSIC input-profile settings. For example,
HSI with ‘Plus 7’ enabled becomes a 15-channel profile:
1 – Intensity
2 – Color Temp
3 – Tint
4 – Strobe
5 – Fan Control
6 – n/a
7 – Plus 7
Control on/off
8 – Red
9 – Red Orange
10 – Mint
11 – Blue
12 – Indigo
Placing channel seven at a value
over 51% gives the fixture a
15-channel profile
Channels 9-15 represent the
native colors of the fixture and
allow the operator to adjust
individual color channels to fine
tune the color output
Variable strobe control: 0% is no strobe. The fixture
output will strobe more rapidly as the strobe channel
value approaches 100%.
Strobe
7 of 8
The desired color and intensity
is achieved by using the HSI or RGB
channels
Placing channel seven at a value
over 51% gives the fixture a
15-channel profile
Channels 9-15 represent the
native colors of the fixture and
allow the operator to adjust
individual color channels to fine
tune the color output
Variable strobe control: 0% is no strobe. The fixture
output will strobe more rapidly as the strobe channel
value approaches 100%.
ETC®
Y
R
A
Source Four LED Series 2
Source Four LED Series
N
I
M
PHOTOMETRY
I
L
E
The Source Four LED Photometry Guide and complete IES photometry data files may be downloaded from the ETC website.
Go to http://www.etcconnect.com
R
P
PHYSICAL
Source Fource LED Series 2 Weights and Dimensions
WEIGHT*
SHIPPING WEIGHT
lbs
kgs
lbs
kgs
With Barrel
18.3
8.3
28
12.7
Without Barrel
14.3
6.5
23
10.4
* Does not include mounting hardware or lens tube
10.6”
268mm
7.9”
200mm
24.2”
615mm
12.1”
308mm
17.1”
434mm
6.9”
174mm
10.8”
274mm
13.3”
338mm
24.8”
631mm
Corporate Headquarters • 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA • Tel +1 608 831 4116 • Fax +1 608 836 1736
London, UK • Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK • Tel +44 (0)20 8896 1000 • Fax +44 (0)20 8896 2000
Rome, IT • Via Pieve Torina, 48, 00156 Rome, Italy •Tel +39 (06) 32 111 683 • Fax +44 (0)20 8752 8486
Holzkirchen, DE • Ohmstrasse 3, 83607 Holzkirchen, Germany • Tel +49 (80 24) 47 00-0 • Fax +49 (80 24) 47 00-3 00
Hong Kong • Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong • Tel +852 2799 1220 • Fax +852 2799 9325
Web • www.etcconnect.com • Copyright©2014 ETC. All Rights Reserved. All product information and specifications subject to change. 7461L1000 Rev. C USA 11/14
U.S. and international patents pending.
8 of 8