Manual - Baird 22 TI2205DVDAR TI2205DVDSR LED

A3./=-<//8
User Guide
Model: TI2205DVDAR | TI2205DVDSR
PLEASE READ THIS USER GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE
2
CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Attaching/Detaching the stand and wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Getting Started - Initial Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
TV Buttons and Input Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
TV Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-18
Channel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Picture Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Sound Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Time Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Lock Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PC Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
DVD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22
8 Day TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
USB Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
USB Mode / Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-28
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Digital Switchover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3
IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions. All the safety and operating instructions should be read before the appliance is
operated.
Warnings
• To reduce the risk of fire, electric shock or damage to the television, do not expose it to dust, rain or moisture, or place any
objects filled with liquids on or near the television.
• Do not place the television in a confined space, ensure that nothing can obstruct the ventilation openings at the rear of
the television.
Dispose of this television and any components including batteries in an environmentally friendly manner. If in doubt,
please contact your local authority for details of recycling.
To prevent spread of fire, keep candles or other open flames
away from this product at all times.
Safety
• For your safety, this appliance is fitted with a fused moulded 3 pin mains plug. Should the fuse need to be replaced,
ensure that any replacement is of the same amperage and approved with the BSI mark.
• The television should be connected to a mains socket outlet with a protective earthing connection.
• Never try and replace the mains plug unless you have adequate qualifications and are legally authorised to do so. In the
event that a replacement mains cable is required, contact the manufacturer for a suitable replacement.
• Never use the television if it is damaged in any way.
• Always place the television on a flat level surface avoiding anywhere which may be subject to strong vibration.
• Ensure the television is not placed on top of the power cable as the weight of the television may damage the cable and
cause a safety hazard.
• Never place mobile phones, speakers or any other device which may cause magnetic or radio interference with the
television. If interference is apparent, move the device causing the interference away from the television.
• To disconnect the apparatus from the mains, disconnect the Mains Adapter from the wall socket. Always ensure the
switch on the wall socket is readily accessible.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
• Install the product at least 5cm from the wall for ventilation.
Maintenance
• To clean this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a moist soft cloth dipped in a soap
and water solution or a weak detergent solution.
• Use eyeglass cleaner to carefully remove stubborn dirt from the LCD/LED Screen.
• Never use alcohol, paint thinner or benzene to clean this unit.
• Before using a chemically treated cloth, read the instructions that came with the cloth carefully.
CAUTION: If water or other liquid enters the television through the display panel surface,
a malfunction may occur.
Packaging
• The safest way to transport your item is in the original box/packaging - Please save your packaging for this purpose.
• You will need original box/packaging in the event of warranty/service repair or support. We are unable to carry out
warranty/service if you are unable to package it correctly.
4
IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions. All the safety and operating instructions should be read before the appliance is
operated.
Important Information Regarding Use of Video Games, Computers, Captions or Other
Fixed Image Displays
The extended use of fixed image program material can cause a permanent “shadow image” on the LCD panel.
This background image is viewable on normal programmes in the form of a stationary fixed image. This type of
irreversible LCD/LED panel deterioration can be limited by observing the following steps:
1. Reduce the brightness/contrast setting to a minimum accetable viewing level.
2. Do not display a fixed image for extended periods of time.
3. Turn the power off when not in actual use.
Examples of images that you need to watch out for are as follows (this is not an exhaustive list):
• TV Channel Logos: e.g. Shopping channel logos and pricing displays-especially if they are bright and stationary. Moving or
low-contrast graphics are less likely to cause ageing of the screen.
• Time Displays.
• Teletext: Do not view a stationary page for a long period of time.
• TV/DVD Menus: e.g. Listings of DVD disk content.
• Pause Mode: Do not leave the TV in pause mode for long periods of time, e.g. When watching DVDs or videos.
Important: Once a ‘shadow image/screen burn’ occurs, it will never disappear and is not repairable under
warranty.
How do I dispose of this product?
UK: Waste electrical products should not be disposed of with household waste. Separate
disposal facilities exist. For your nearest facilities, please contact your local council for
information on your nearest disposal site.
ROI: Waste electrical products should not be disposed of with household waste. Separate
disposal facilities exist. Check with your Local Authority or retailer for recycling advice.
Batteries
•
•
•
•
•
5
Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or mix old and new batteries.
Dispose of batteries in an environmentally friendly way.
Certain regions may regulate the disposal of batteries.
If you are not using your TV for an extended period of time then remove the batteries to prevent
possible damage due to leakage.
Cd
WHAT IS INCLUDED IN THE BOX
Accessories
Included with this TV are the following accessories:
1 x User Guide
1 x Remote Control
1 x Quick Start Guide
A3./=-<//8
User Guide
QUICK START GUIDE
Model: TI2205DVDAR | TI2205DVDSR
Easy 6 step installation
Please read the section on SAFETY before proceeding with your installation.
Thank you for purchasing this Baird TV. Remove the TV from the packaging and proceed with the following steps for best results.
To fully understand the features and safety advice of your LED TV, we strongly recommend that you read the manual enclosed with your TV.
1
Insert the stand into the bottom of the LED TV body and tighten the
screws.
4
Insert two UM-4 (AAA) batteries into the remote control. Take care to
observe correct polarity.
2
Insert the aerial cable into the RF socket.
5
Switch on the TV by pressing the STANDBY button on the top of the
TV or on the remote control. (The LED will change from red to green)
3
Connect the power cord to the AC IN connector of the MAINS ADAPTOR. Connect the DC Out Connector of the Adaptor to the DC In of
your TV. Connect the Mains PLug to a wall socket and switch on. The
RED standby light will illuminate.
6
The First Time Installation Menu will appear. The default OSD language is ENGLISH. Press “OK” to confirm. The default Country is UK.
Press “OK” to confirm. The TV will now tune in all digital TV and Radio Programmes in your area. This will take around 5 minutes. Press
the “OK” buttton a total of four times to confirm the “Country Code”,
“Primary Region”, “Secondary region” and “Tertiary Region” respectively. On completion the TV will store all DIGITAL PROGRAMMES
available in your area and will then display the first channel found.
For all other Setup Information please refer to your User Manual.
PLEASE READ THIS USER GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE
1 x TV
1 x Mini YPbPr Cable
1 x Power Adapter
1 x Power Cable
Please save your packaging as you will need this in the event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your
item in the event of warranty/service repair is in it’s original box/packaging.
What is included in the box
6
ATTACHING / DETACHING THE STAND
Attaching the Stand
Place the TV face down on a protective surface. To attach the stand, insert the neck of the TV stand into the
socket of the stand plate. Turn the base of the stand to lock it into position on the TV. Using the open and
close arrows for guidance.
Detaching the Stand
To remove the stand remove the screws in the circled area and the neck will
come off.
IMPORTANT - Before drilling any holes in the wall ensure you are not
drilling where there could be any electric wires, water or gas pipes.
Wall mounting the TV
This television requires a VESA 100 x 100 wall mount, or equivalent.
1) Your TV is provided with four hexagonal spacers to attach your wall mount.
2) The wall mount can now be easily attached to the spacers using suitable screws. The positions of the spacers
is indicated in the diagram below.
fig 1
TV
100mm
fig 2
TV
Viewing angle
Viewing angle
100mm
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so that
the TV’s screen is ‘face on’. See fig 1 and 2
Important – If wall mounting this TV, only use the spacers already provided in the wall mounting holes. Using
other screws which are longer could cause irreparable damage to internal parts.
7
Important installation instructions
GETTING STARTED - INITIAL SET UP
1) Connect the TV to the TV Aerial wall socket.
(Fig A)
2) Connect the power cable to the Mains Adaptor
and the Mains Plug to the wall socket. Ensuring the
wall socket is OFF, connect the DC Output of the
Adaptor to the TV “DC IN” connector.(Fig B)
Fig A
Fig B
3) Insert the batteries into the Remote control. Take
care to observe correct polarity.
4) Switch on the television using the red (power)
button on the remote control, or on the top of your
TV.
5. You will now be welcomed with the initial set-up
screen. Press OK to confirm OSD LANGUAGE. Then
press OK again and the auto tuning will start.
6) After tuning the following screen will appear.
Press OK to confirm Country Code, again to
confirm Primary region and twice more to confirm
Secondary and Tertiary Regions. Your first
Programme should now appear.
Tip: If the TV finds some, but not all, of the Digital channels, the TV is functioning correctly but the signal being
received is not strong enough. (The signal strength needs to be above 85% - you can see the signal strength
the TV is receiving when you change channels/ programmes) You will need to increase the signal reception
in order to receive all of the channels available. The most economical way to do this is by purchasing and
connecting a ‘signal booster’ in between the TV and the TV aerial socket. If this does not solve the problem,
you will need to upgrade the TV aerial to a digital hi-gain compatible aerial.
Connect between TV
and TV aerial socket
Signal Booster
Getting Started - Initial Set Up
8
TV BUTTONS & SOURCE MENU
1 Press to open and close the disc tray in DVD mode.
2 PLAY/PAUSE in DVD mode.
3 Volume up/down and menu left/right.
4 Channel up/down and menu up/down.
5 Displays Menu/OSD.
6 Displays the input source menu.
7 Standby Power On/Off.
8 Red is standby mode, green when your TV is switched on.
9 Infrared sensor for the remote control.
VOL.
VOL.
CH.
CH.
MENU INPUT
Choosing Mode Input/Source
To switch between the different input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE/ AV] - The source menu will appear.
2) Press [\/] or [/\] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up / down using CH+/ CH- buttons to the input/
source you require.
3) Press Vol+ to change input/source to the one selected.
9
TV Buttons and Source Menu
REMOTE CONTROL
Viewing remote control - TV
Standby
Turn the TV ON and into standby mode.
MUTE
Press to mute the sound. Press again or press V+ to unmute the TV..
Number buttons
Press a number to select a channel. Following selection, press -/-to activate the channel, or channel activates automatically in 3 seconds.
JUMP
Return to the previous channel viewed.
S.MODE
Press to cycle through the different sound settings.
I-II
Press to search the NICAM modes.
AUDIO
Press to select Audio language.
P.MODE
Press to cycle through the available video picture modes.
EXIT
Exit the main TV menu to the screen.
Arrow buttons and OK Allows you to navigate the on-screen menus and adjust the system
settings to your preference.
MENU
Brings up the main TV menu to the screen.
INPUT
Press to cycle through the input source.
FAV.CH
Press to display favourites menu.
VOL +/Press to increase/decrease the sound level.
CH +/Press to scan through channels.
SLEEP
Select the automatic set off time for your TV.
Viewing remote control - Teletext
Number buttons
Press 0-9 to select a teletext page.
SUBTITLE To display subtitle.
SUBPAGE Press this button to view the video text sub pages.
Colour & TELETEXT buttons
Select preferred TELETEXT page.
Display the main index in TELETEXT mode. Can also be used for easy access to
the USB record program.
Reveal or hide the hidden words.
Display the top, bottom or whole page, to easily read in TELETEXT mode.
Freeze a multi-page passage on screen in TELETEXT mode.
Turn on and off the Teletext function.
Viewing remote control - DTV, DVD & Multimedia
Number buttons
Press a number to select a channel. Following selection, press -/-- to activate
the channel, or channel activates automatically in 3 seconds.
GUIDE
Display the Programme Guide on the screen in DTV mode. Press again to turn
GUIDE off.
EXIT
Exit the main TV menu.
Arrow buttons and OK
Allows you to navigate the on-screen menus and adjust the system settings to your preference.
MENU
Brings up the main TV menu to the TV screen.
INPUT
Press to cycle through the input source.
FAV.CH
Press to display favourites menu.
REC
Press this button to record programmes in DTV.
DTV/RADIO Select DTV or Radio modes.
P.SIZE
Change the picture format.
DVD & Media control buttons
Press to open and close the disc tray in DVD mode.
■
Stop in MEDIA mode or exit the REC or TIMESHIFT mode.
►▐ ▌
PLAY/PAUSE in DVD and MEDIA mode.
T IMESHIFT Press to select timeshift function.
INFO
Pressing once displays a variety of information, such as the current channel and the input source.
▐◄◄ ►►▐
Jump to previous and next track in DVD and MEDIA mode.
◄◄ ►► Fast reverse and fast forward key in DVD and MEDIA mode.
Remote Control
10
CONNECTIONS
12
–
11
–
10
–
9
–
8
–
7
–
6
1-2-3-4-5
1
DC IN 12V 4A
Power supply.
2
VGA
Connect to the PC-RGB.
3
SCART
Connect the SCART jack of VCR or DVD.
4
Video in
Connect the Video and R/L audio output jack of DVD.
5
Y/PbPr/CbCr IN
Connect the Y/PbPr/CbCr output jack of DVD or VCR
using the mini YPbPr cable. (supplied)
6
VGA
Connect to the PC-RGB.
7
Digital Audio
OUT
Connect the SPDIF receiver.
8
USB
Connect to portable USB device.
9
Ant IN
Connect the antenna.
10
HDMI
Connect the HDMI output jack of DVD/Bluray player.
11
CI
Connect to the CI card.
12
Earphone out
Connect the headphones.
Connecting a DVD Player/Recorder, Video Recorder or Cable/Satellite Box
TV’s Input/Source should be set to SCART.
RF In
DVD or VCR
TV aerial
Wall socket
SCART
OUT
RF
IN
RF
OUT
SCART
11
Connections
CONNECTIONS
Connecting a Camcorder, Camera or Games Console
Source should be set to Video.
Yellow
Video In
Audio In R
Red
Audio In L
White
Component
Camera or Camcorder
Connecting a High Definition (HD) Device
Option 1 - Via HDMI to HDMI cable.
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with
minimal loss of quality.
TV’s Input/Source should be set to HDMI 1, 2 or 3.
HDMI OUT
HDMI
Option 2 - Via Component cable.
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you
must connect via Component (for picture) and by phono cable (for sound). These cables are not supplied with
your TV.
TV Source should be set to Component.
Red
Component (HD)
Green
Blue
Audio L/R
Component
Red
White
Audio In R
Audio In L
Connecting a hi-fi system / sound amplifier
Coaxial In
Connections
Digital Audio Out
12
CHANNEL MENU
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] button.
If you wish to make changes to any of the default settings, use the scroll
settings press [OK] button.
buttons. To confirm any
To exit this menu at anytime, press [EXIT] button.
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and analogue
channels.
ATV Manual Tuning - Allows you to manually tune your analogue signal.
DTV Manual Tuning- Allows you to manually tune your digital signal.
Programme Edit - Allows you to delete, skip and add favourite channels.
Signal Information - Allows you to display signal details, including Channel, Quality and Strength.
CI Information - Allows you to display details after you have inserted the CI card.
13
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] button.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button.
buttons.
Tip: Only the “Personal” mode allows you to adjust Contrast, Brightness and Colour.
To exit this menu at anytime, press [EXIT] button.
Picture Mode - Choose from the following presets:
Standard
Default settings.
Dynamic
Provides higher levels of contrast and brightness.
Mild
Set to be lighter in colour and less bright.
Personal
Lets you manually alter all the settings.
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour saturation.
Tint - Lets you increase or decrease the level of tint within the picture. (only in NTSC playback mode)
Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature - Choose from the following presets:
Normal
Default settings.
Warm
Increases red within the picture.
Cool
Increases blue within the picture.
Noise Reduction - Choose from the following presets:
Off
Turns noise reduction off.
Low
Minor system adjustment.
Middle
Medium system adjustments.
High
Maximum system adjustments.
Default
Default settings.
Tip: If you do not press any buttons for 15 seconds, the menu will automatically exit. You can change the
length of time before the menu exits automatically - See ‘Menu Duration’ section.
TV Menu Operation
14
SOUND MENU
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] button.
If you wish to make changes to any of the default settings, use the scroll
settings press [OK] button.
buttons. To confirm any
To exit this menu at anytime, press [EXIT] button.
Sound Mode - Choose from the following presets:
Standard
Default settings.
Music
Emphasises music over voices.
Movie
Provides live and full sound for movies.
Personal
Selects your personal sound settings.
Sports
Emphasises sound for sports.
Tip: Treble and bass levels can only be adjusted when the sound mode ‘Personal’ is selected.
Treble - To adjust the amount of high frequency within the sound.
Bass - To adjust the amount of low frequency within the sound.
Balance - To adjust the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘on’ is selected, the volume will stay at a constant level regardless of input/
source.
SPDIF Mode - This is the digital COAX Audio output. Choose from the following options:
Off
Off.
Auto
Selects the best settings automatically.
PCM
Select this option if you are connecting to a Stereo Hi-fi via coax cable.
(Pulse-code modulation (PCM) is a digital representation of an analogue signal).
15
TV Menu Operation
TIME MENU
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] button.
If you wish to make changes to any of the default settings, use the scroll
settings press [OK] button.
buttons. To confirm any
To exit this menu at anytime, press [EXIT] button.
Clock - Set the date and time.
Tip: If you are receiving a Digital TV signal your date and time will be set automatically and this function will
be greyed out.
Time Zone - Change your current time zone.
Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount of time.
Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min
Auto standby - Toggle the Function between OFF, 3, 4 or 5 hours. NOTE: The default setting is OFF.
OSD Timer - Available options are: 5S, 10S,15S ,20S, 25S, 30S.
TV Menu Operation
16
LOCK MENU
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] button.
If you wish to make changes to any of the default settings, use the scroll
settings press [OK] button.
buttons. To confirm any
To exit this menu at anytime, press [EXIT] button.
Lock System - Press OK button to make the following 3 options valid (Default password is ‘0000’).
Set Password - Press OK button to enter sub-menu to set a new password.
Block Program - Press OK button to enter the sub-menu.
On the Block program submenu: Press ▼/▲ button to select the programme you want to lock,
then press the green button on your remote control (To unlock the programme, input the password
you set), press OK button to save setting and menu button to back, go to the previous menu.
Parental Guidance - Press OK. Enter sub-menu to select viewing settings, available options are: Off, 4-18.
Key Lock - Enter sub-menu to select the lock settings, available options are: On or Off.
17
TV Menu Operation
SETUP MENU
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] button.
If you wish to make changes to any of the default settings, use the scroll
settings press [OK] button.
buttons. To confirm any
To exit this menu at anytime, press [EXIT] button.
OSD language - Allows you to change the language
of the menu.
TT Language - TT Language in SETUP is invalid.
Audio Language - Allows you to select Audio
Language.
Subtitle Language - Allows you to select Subtitle
Language.
Hearing Impaired - Press OK button to select on or off.
PVR File System - Press OK button to enter sub-menu.
Aspect Ratio - Within the UK the picture format varies
depending on the channel/broadcast. There are a
number of different options to best meet your needs.
Zoom 1
The picture is the correct proportion but zoomed in
to fill the screen.
Auto
Automatically displays the best picture format. So the
picture is in the correct position. May have black lines
at the top/bottom and/or sides.
4:3
Displays the 4:3 picture in its original size. Side bars
are shown to fill the 16:9 screen.
Blue Screen - Changes the background when there is
no input between clear and a blue background. (Only
available on some sources)
16:9
Top and bottom bars are shown to fill the 16:9 screen.
4:3 pictures will be stretched.
TV Menu Operation
Zoom 2
The picture is the correct proportion but zoomed in
more to overlap the screen.
Reset - Press ▼/▲ button to select Reset, then press
OK button to enter a dialogue. Press ◄ button to
select Yes to restore factory default.
Software Update (USB) - From time to time we may
release new firmware to improve the operation of the
television (available to download). This menu lets you
install the new software/firmware onto the television.
Further details of how to do this will be issued with
the firmware. Contact the helpline or refer to the
‘product support’ section of the website.
18
USING THE TELEVISION AS A COMPUTER MONITOR
IMPORTANT – Before connecting the computer to the television you must ensure the computer settings are
correct for the television. You MUST do this using your old monitor.
How to set up for Windows XP, Windows
Vista & Windows 7. (connecting via VGA
cable to the TV)
Windows XP
Windows Vista
Windows 7
1. Switch on your computer.
2. When finished booting up right click
your mouse anywhere on the screen.
3. Left click your mouse on Properties/
Personalise.
4. Left click your mouse on Setting/Display
Settings. Ensure the screen resolution
is set to what is shown in the technical
specifications section toward the
rear of this user guide. To correct the
resolution to that of the television move
the slider.
5. Left click your mouse on Advance/
Advanced Settings and left click on
Monitor.
6. Left click on the drop down for Screen
refresh rate and select 60 Hertz, if you
experience picture noise or “flickering”,
select 50 hertz or 70 hertz.
7. Click on Apply, then click Yes and the
settings will be saved.
8. Now switch off your computer and
connect the television. (as shown)
9. Switch on the TV, select the input/source
to VGA/PC and re-start your PC.
How to set up for Windows 8. (connecting via VGA cable to the TV)
1. Switch on your computer.
2. When finished booting up login into your account.
3. Swipe in from the right edge of the screen, and then tap Devices. (If you’re using a mouse, point to the
upper-right corner of the screen, move the mouse pointer down, and then click Devices.)
4. Tap or click Second screen and then choose one of these options:
a. Duplicate. You’ll see the same things on both screens.
b. Extend. Your screen is now spread over two monitors, and you can drag and move items between the
two.
c. Second screen only. You’ll see everything on the connected screen, and the other one will remain
blank.
19
PC Operation
PC SETTINGS
To access this menu, press [MENU] button on the remote control. To enter a menu press [OK] button.
If you wish to make changes to any of the default settings, use the scroll
settings press [OK] button.
buttons. To confirm any
To exit this menu at anytime, press [EXIT] button.
Auto Adjust - Lets you automatically configure the television to be used as a computer monitor. It is
recommended that you use this feature first as in most cases it will correctly align the picture.
H Offset - Changes the horizontal position of the picture.
V Offset - Changes the vertical position of the picture.
Size - increase picture size.
Phase - To adjust delay time of phase in order to reduce the noise of picture.
Position Reset - Changes back to the original settings.
Tip: If the computer is left in-active for a period of time, the television will switch into a ‘sleep’ state (the screen
will power off to save power). To switch back on press the standby button.
PC Operation
20
DVD
On Screen Display -DVD
An on screen display (OSD) indicator will be displayed
on the upper part of the TV screen when DVD
functions are executed.
The OSD indicator is a user friendly display that shows
the status and playback type of your disk. The display
will change automatically when different file types
are loaded, i.e. DVD, CD, Music etc.
Customising Language Setup Settings
Language Setup
OSD
Menu
Audio
Su btitle
fig. 1
Supported Formats
DVD support DVD / CD-DA / JPEG formats.
DVD Player Functions
CLOSE / OPEN - Press button on the top panel or the
remote to open and close the disc tray.
►▐ ▌ PLAY / PAUSE - Press ►▐ ▌button on the top
panel or the remote to start playback or pause.
■ STOP - Press ■ button to stop.
▐◄◄ - Press to skip to the beginning of the currently
played chapter or track.
►►▐ - Press to skip to the beginning of the next
chapter or track.
◄◄/►► - Use to advance or reverse playback
rapidly.
A-B - Use to repeat playback of a specific section of
a disc.
REPEAT - Press to select the repeat mode.
DVD MENU - Press to display the DVD disc menu.
DVD SETUP - Press to show the DVD mode setup
menu on the screen.
TITLE - Press to display the DVD content title.
AUDIO - Press ◄/ ► button to select Audio
Language.
ANGLE - When playing back a DVD press the ANGLE
button to change the camera angle.
SUBTITLE - While play a DVD disc, press SUBTITLE
button repeatedly to select the desired subtitle.
English
French
German
Italian
Spanish
Press the DVD SETUP button to enter the setup menu:
1. Use the ◄/► buttons to select Language Setup
option as shown in Fig.1.
2. Use the ▼/▲ ◄/► buttons to highlight an
individual Language Setup option.
Language Options
The Language Setup Menu allows you to change the
languages in the following categories:
OSD - The default language of the On Screen Display
is English. You can select other OSD languages:
English / French / German / Italian / Spanish / Dutch.
Menu - The following languages can be selected in
the Menu option: English/French / German / Italian /
Spanish / Dutch.
Audio - The following languages can be selected in
the Audio option: English/ French / German / Italian /
Spanish / Dutch.
Subtitle - The following languages are available in
the Subtitle option: English/French / German / Italian
/ Spanish / Dutch / Off.
NOTE: Not all DVD support multiple languages.
Encoding - The Encoding selections available are
‘Western European’ or ‘Central European’.
Customising Preference Settings
Press DVD SETUP button to enter setup menu
1. Use the ◄/► buttons to select Preference option.
2. Use the ▼/▲ ◄/► buttons to highlight an
individual Preference option.
Note: When setting Preferences ensure that the
DVD disc is removed from the disc tray. Alternatively,
ensure that the DVD disc is not playing.
21
DVD Menu Operation
DVD
Preference Settings - Options
TV Type
4:3 PS - Standard format - When viewing widescreen
content in 4:3 PS mode, the on screen image will not
be shown in full. Use this setting for standard format
content.
4:3 LB - Standard format - When viewing widescreen
content in 4:3LB mode, the display will show black
bars on the top and bottom of the screen. Use this
setting for standard format content.
16:9 - Widescreen picture viewing - Use this setting
for viewing widescreen images.
Screen Saver Option:
ON: To activate the screen saver.
OFF: To disable the screen saver.
Use the ▼/▲ buttons to highlight an individual
DVD MENU option, use the ◄/► buttons to
change the setting, and press the DVD button
on the remote control third time to exit the DVD
menu.
DVD Supports following formats:
1. ( CVR/VBR ) bite rate range : 32kbps~320kbps.
WMA bite rate range: 64kbps~192kbps (Sample
Rate).
2. JPG picture maximum resolution:
Baseline JPG: 3072X2048.
Progressive JPG: Width x ( High+128) <3300000.
3. *.MPG, *.DAT MPEG1 video format, same as VCD..
If the DVD player stops, or the screen is motionless
for a period of time, the screen saver will appear to
prevent damage to the LED screen.
TV System
NTSC - To be used when viewing NTSC content.
PAL - To be used when viewing PAL content.
AUTO - The TV will adjust automatically to play the
DVD content in the correct format.
Video output Select from output options: CVBS+YUV
or YUV P-SCAN.
Brightness - Select from options: normal, bright, or
soft.
Contrast - Adjust the contrast levels of the TV image.
Last Memory
ON: When the DVD player has been turned off and
turned on again, the LAST MEMORY function will
resume playing of the content from the same point.
OFF: Disable the last memory function.
Audio Setup
Digital out - Select from options: SPDIF/PCM, SPDIF/
RAW or OFF.
Down mix - Select from options: Lo/Ro or Lr/Rt.
CUSTOM
Style - Change the background colour and style from
the four options available.
Angle Mark - Angle Mark can be set to ON or OFF.
Default - Restores the setup parameters (excluding
the password) to the factory default settings.
Use this option only when the DVD has stopped
playing, or has been removed from the disc tray.
DVD Menu Operation
22
8 DAY TV GUIDE / USB RECORD
The TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where
supported by the Digital TV channel). You can view the start and end time of all programmes and on all
channels for the next 7 days and set reminders.
1) Press [TV GUIDE]. The following 8 Day TV Guide will appear.
2) Navigate through the menu using
You can now:
Record a Programme by pressing RED.
Set a reminder by pressing GREEN.
View a previous day by pressing YELLOW.
View the next day by pressing BLUE.
3) Press [EXIT] to exit the 8 day TV Guide.
Note: This TV is designed to operate with USB memory sticks up to 32GB. It is possible to use either a USB
memory stick or a USB portable Hard Drive of a larger capacity, however, it must be formatted to the FAT32
file system in order to operate correctly. At the time of printing this user guide, Windows XP/Vista computers
are only capable of formatting up to 32GB, therefore, you will need a software programme/utility to format
larger USB drives/hard drives to FAT32. Additional help and support is available from the web site.
23
8 Day TV Guide
USB RECORD - DIGITAL/DIGITAL TV MODE
USB RECORD – DIGITAL/Digital TV MODE
Built into this television is a USB record facility. This function is available in Digital/Digital TV mode when
used in conjunction with a compatible USB memory stick or USB Hard drive. The benefits of this are as
follows:
• Pause live TV/Radio and then playback, fast forward and rewind. (up to live TV)
• One button record, if you decide you want to record the current programme.
• Easy programmable recording from the 8 day TV Guide.
• Record TV/Radio and watch/listen back on your computer/laptop.
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable)
You can purchase a suitable USB device from any suitable Computer store or online. See below for the
minimum specification.
Minimum Specification - USB Memory Stick
Read Speed
20 MB/s (Mega Byte Per Second)
Write Speed
6 MB/s (Mega Byte Per Second)
If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this
user guide.
Pause Live TV/Radio (Time Shift)
Pausing Live TV/Radio is very simple.
- Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
- Press fast forward to go forward in a recording. (i.e. to skip adverts)
- Press fast rewind to go back in a recording. (i.e. if you fast forwarded too far)
Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart time
shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you are watching. To do this you need
to press the [REC] button.
Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or record
one channel while the television is in standby mode.
Note: USB record function is only avilable in Digital/Digital TV TV/Radio mode. Due to copyright laws and
illegal copying/recording it is not possible to record to/from any other input/output source.
USB Record
24
USB MODE / MEDIA PLAYER
USB mode offers playback of various different types of content that you have saved on your USB Memory Stick.
On switching to the USB source the above menu screen will appear. The content will be divided into Photo,
Music, Movie and Text based file type.
You can navigate through the menus using the scroll
view press the [OK] button.
25
buttons. To confirm the item you wish to play/
USB Mode / Media Player
FREQUENTLY ASKED QUESTIONS
General
I would like to have louder
sound by connecting additional
speakers.
Subject to the TV model and connections, it is possible to connect the TV to
an external amplifier or surround sound (subject to connections/inputs on the
device) as follows:1) Connect a COAX cable* from the TV’s COAX output to your amplifier/
surround systems COAX input.
2) Connect a 3.5mm jack to L/R phono cable* from the TV’s headphone socket
(where fitted) to your amplifier/surround sound L/R input. Please note sound to
the TV’s speakers will be disabled.
3) On selected models, it maybe possible to connect a SCART input/output*
switch with an additional L/R Phono cable* to the TV’s SCART socket and to
the L/R Phono Input of your amplifier/surround sound. Please note due to
copyright laws it is not possible to output video/sound from the TV on certain
sources, i.e. HDMi, DVD etc.
*cables and switches mentioned are available to purchase separately from
your retailer.
General
Why are some options in the
menu unavailable and greyed
out?
Some options are only available in certain sources, i.e. HDMI, PC/VGA. They are
unavailable in the other sources where they have no affect.
TV
I have tuned in Digital TV but
I am not receiving any or all
of the channels and/or the
channels I receive are breaking
up
1) Check you are in an area that can receive Digital TV. Visit www.freeview.co.uk
or call 08701 111 270.
2) Check you are using an aerial that is able to receive a good digital signal.
In most cases, you will need an outdoor digital hi-gain/wideband aerial. In
areas that have excellent Digital TV coverage, you may be able to use a loft
type aerial but it is highly likely that you will also need to connect a booster
between the back of the TV and the TV aerial wall socket. Unfortunately, to
receive a good enough digital signal, it is not possible to use a portable/indoor
type aerial.
TV
I have re-tuned my television
but when I switch it off it is not
storing the channels.
Complete a first time installation, please refer to the set-up menu section of the
manual for how to do this.
VCR/DVD
Recorder
I have connected the TV to my
VCR or DVD Recorder via SCART
but it is not recording.
In addition to connecting via SCART, you should connect the aerial cable from
the wall socket to your VCR/DVD Recorder and another aerial cable from the
VCR/DVD Recorder to the TV.
Game Consoles
I have connected my PS3 to
the TV via HDMI, but I am not
receiving any pictures or sound
on my Television.
1) Ensure the TVs source is on HDMI.
2) Check your settings on your PS3 are as per the PS3 instruction manual.
Game Consoles
I have connected my Xbox 360
to the TV via Component Cables
(Red, Green & Blue) but I am not
receiving any sound.
Component cables only provide HD Pictures. For the sound you will need to
connect the Red & White audio cables on the Xbox to the Red & White phono
inputs on the rear of the TV. Please refer to the ‘Connections’ pages.
USB Mode
I have inserted a USB Memory
Key, but the TV does not
recognise it.
Ensure the USB Memory Key is formatted to type FAT32.
USB Mode
Can I use a USB portable hard
drive with my TV?
If you wish to use a portable hard drive larger than 32GB, please note that
it must be formatted to the FAT32 file system in order to operate on this TV.
Windows XP/Vista computers are only capable of formatting up to 32GB,
therefore, you will need a software programme/utility to format larger hard
drives. Please refer to the web site for more information. Please note this EU
Receiver may not be compatible with all USB HDD devices available in the
market place.
System Lock
I have changed the password
on the television and now
forgotten it.
There is a master password of 4711, to gain access to the TV menu and reset
the normal password.
General Information
26
TECHNICAL SPECIFICATION
TI2205DVDAR | TI2205DVDSR
Screen
Screen Size
21,5"
Resolution
1920 x 1080
Contrast Ratio
Brightness cd / m2
View Angle
Inputs/Outputs
1 x HDMI, 1 x SCART, 1 x Video, 1 x YPbPr
Audio Inputs
1 x 3.5mm jack for PC audio input, 1 x pair RCA Audio input shared for Video
and Component
Power Watts (RMS)
Other
2 x 3W
AC 100V ~ 240V ~ 50Hz/60Hz, 31W (<0,5W StandBy)
Dimensions
including
stand
27
1 x 3.5mm jack for headphones, 1 x Coax Audio output
USB Socket for media recording, playback and software update
Voltage and
power
consumption
Weight
200
170/160
Video Inputs
Audio Outputs
Sound
1 000:1
531,6 mm (W) x 161,7 mm (H) x 375,1 mm (D)
Net
4.36 kg
Gross
5.65 kg
General Information
INDEX
7 DAY TV GUIDE / USB RECORD .......................................................... 22
ATTACHING/DETACHING THE STAND
AND WALL MOUNTING.......................................................................... 7
CONNECTIONS ........................................................................................ 11-12
CONTENTS.................................................................................................. 5
DIGITAL SWITCHOVER ............................................................................ 28
DVD .............................................................................................................. 21-22
FREQUENTLY ASKED QUESTIONS ...................................................... 26
GETTING STARTED - INITIAL SET UP .................................................. 8
CHANNEL MENU ...................................................................................... 13
IMPORTANT SAFETY INSTRUCTIONS ................................................ 4-5
INDEX ........................................................................................................... 28
SETUP MENU ............................................................................................. 18
LOCK MENU ............................................................................................... 17
PC SETTINGS.............................................................................................. 21
PICTURE MENU ......................................................................................... 14
REMOTE CONTROL .................................................................................. 11
SETUP MENU ............................................................................................. 19
SOUND MENU ........................................................................................... 15
TECHNICAL SPECIFICATION ................................................................. 27
TIME MENU ................................................................................................ 16
TV BUTTONS & SOURCE MENU .......................................................... 9
USB MODE / MEDIA PLAYER ................................................................ 25
USB RECORD - DIGITAL/DIGITAL TV MODE..................................... 24
USING THE TELEVISION AS A COMPUTER MONITOR................... 20
WHAT IS INCLUDED IN THE BOX ......................................................... 6
DIGITAL SWITCHOVER
Television in the UK is going digital, bringing us all more choice and new services. Starting late 2007 and
ending in 2012, television services in the UK will go completely digital, TV region by TV region.
How the switchover affects your TV equipment.
Your new TV has a digital tuner built in, which means it is ready to receive the Digital TV signal by simply
connecting it into your aerial socket (you can check if you can get digital TV through your aerial now or whether
you will have to wait until the switchover at www.digitaluk.co.uk)
When the TV switchover happens in your area, there are at least two occasions when you will need to re-tune
your TV in order to continue receiving your existing TV channels and also to pick up new ones. Digital UK, the
body leading the digital switchover, will advise you when you need to retune during the switchover.
How to retune.
Retuning your TV is a very quick and simple process. We recommend that you retune every few months to
ensure you are receiving the very latest TV and radio channels that are broadcast.
1) On the remote control press [MENU] followed by 8 - 8 - 8 - 8 (so the number 8 button four times)
2) The First Time Installation menu will appear. Press [OK] and tuning will take place.
For help and support regarding the digital switchover, please contact Digital UK:
Telephone: 08456 50 50 50 (calls charged at local call rate, approx 3p per minute daytime or 1p per minute
evenings from a BT landline)
Digital UK website: www.digitaluk.co.uk
General Information
28