STACK STACK STACK

STACK
STACK
STACK
®
WORLD CLASS
INSTRUMENTATION
Integrated Dash Display Systems
The ST800 Dash Display System replaces all dashboard instruments - tachometer, oil pressure gauge, fuel pressure gauge, water temperature
gauge, oil temperature gauge and voltmeter - with a single lightweight carbon composite display module.
Analogue Tachometer
Optional Sequential Shift Light
The preferred choice of most racers.
All Stack Dash Display Systems can
drive the 5-LED Sequential Shift
Light Module.
Wide Choice of Dial faces
See Dial Face section below for more
information.
See Performance Features on opposite page.
Super-bright
warning lights
The dash features a user
configurable and builtin, super-bright
shift light. An
external dash top
or panel mount
shift light can be
simply plugged
into the dash
harness.
Lightweight carbon
composite housing
Fully sealed against water and dust
to IP67.
Back-Lit Display
Clear viewing under all
lighting conditions
show different
engine and performance information. Maximum peak value ‘Tell-Tale’
memory is provided on Speed, Temperature parameters and RPM, minimum
peak value tell tales are provided on pressure and voltage parameters.
Dash Displays
Driver selectable LCD display layers
Intelligent alarms
Provided on all monitored
parameters. Alarm levels
are user adjustable to suit
individual vehicle requirements. An internal alarm light is standard and an
optional external light can simply be plugged into the dash harness.
Action Replay Dash
Display
Solid-State Pressure Sensor
The new ST747 solid-state sensor is smaller, lighter,
more accurate and more reliable. Supplied as
standard with all ST800 Dash Display Systems.
Dash Display Systems For Street &
Track Day
These systems are designed for vehicles
and motorcycles which must meet road legal
requirements, and feature speedometer,
odometer and trip meter Each system
includes all sensors (except fuel level
sensor), mounting kit, switch kit, and
professional ready-wired loom.
www.stackltd.com
www.stackinc.com
0-3-8000
0-4-10000
0-3-10500
0-6-13000
0-3-8000 Inverted
0-4-10000 Inverted
0-6-13000 Inverted
0-10-22000**
0-8000 White
0-3-8000 White**
0-6-13000 White**
* See Performance Features section on opposite page for
more information.
Dial Face Options
0-8000 RPM
STACK
STACK
STACK
®
Specifically designed to offer an alternative to PC-based data
acquisition systems, the Action Replay Dash Display provides
the ideal introduction to multi-channel data recording for oval,
sprint, hillclimb and drag racing. Record your RPM, speed*,
temperatures, pressures and lap times* on the track. Back
in the pits, you can replay the data on the Dash Display,
showing the values for every point on the track. The ‘M’
model provides the ultimate feedback tool, by replaying the
Performance Meter & Predictive Lap Time to display exactly
how much time was gained/lost, and where on the track.
 Replay of all engine parameters, and optionally speed &
laptimes* (Requires optional sensor at extra cost)
 Replay Performance Meter & Predictive Lap Time data (M
model only).
 Alarms and laptimes pop-up on the display as they did
while on-track.
 Records up to 15 runs, and up to 2 hours of data.
 Upgrade to full data logging with optional PC download/
software kit
ST8100
ü
ü
ü
ü
ü
ü
ü
ü
ü
ST8100M
ü
ü
ü
ü
ü
ü
ü
ü
ü
ST8100-AR
ü
ü
ü
ü
ü
ü
ü
ü
ü
ST8100M-AR
ü
ü
ü
ü
ü
ü
ü
ü
ü
ST8130
ü
ü
ü
ü
ü
ü
ü
ü
ü
ST8130P
ü
ü
ü
ü
ü
ü
ü
ü
ü
ST8130M
ü
ü
ü
ü
ü
ü
ü
ü
ü
ST8110SR
ü
ü
ü
ü
ü
ü
ü
ü
ü
ST8816S
ü
ü
ü
ü
ü
ü
ü
ü
ü
** Extra cost options
ü
ü
ü
All the Street
& Road legal
models have Blue
LED backlighting
as standard.
Race & rally
models come
with White LED
backlighting as
standard.
Configurable Dash-Logger Systems
Enables you to monitor, display, alarm (and record) any combination of parameters and sensors.
New for 2008, the ST8816S System is designed specifically as an entry-level, fully-configurable DashDisplay and Dash-Logger System. The ST8816S provides an ideal combination of professional hardware
and software. This system includes all harnesses and configuration software, and has 8 fully configurable
and 4 pre-configured sensor inputs to suit almost any application. An optional CAN ECU link enables
connection to a continuously increasing list of ECU’s, eliminating the need for many additional engine
sensors, and leaving the sensor inputs free for other data-logging inputs e.g. steering, brake pressures,
etc.
Configuration of the system couldn’t easier, using the supplied DataPro Designer “drag-and-drop” PC
software. Just choose each parameter you want to monitor, and “drag” the appropriate sensor onto that
input. Next, design your own layout of up to 6 different display screens. Finally, set an alarm level for each
parameter you want a warning for. That’s it!
Select the record rate for each parameter, and you have a powerful Dash-Logger System. A full version of DataPro V4 analysis software is included, allowing the user to
analyse the most important engine, driver and vehicle performance parameters, and get instant feedback of time gains and losses as a result of changes between sessions
and between different drivers. Furthermore, when ready for more channels, you can expand the system further to monitor and record up to 45 channels.
 Fully configurable Dash module with 14 sensor inputs
 Calculation of track maps from recorded vehicle data
 Optional CAN ECU link eliminates the need for engine sensors
 Overlay data from different laps, runs or drivers for data comparison
 PIN code upgrade for PLT, Performance Meter and Brake Bias displays
 Infinite zoom-in into any track section of the data and track map
 Fully configurable data logging, including DataPro Analysis software – the
easiest-to-use professional software in the industry!
 Toggle between distance and time based charting
 Internal 3-axis accelerometer provides lateral, long and vertical g
 Upgrade options for additional sensor inputs and synchronized-video
 Interactive track map and data
 Library of pre-configured layouts to help first time users
 Multiple car teams supported with automated data download
 Fully customisable and user configurable layouts for expert users
 Plus...many more features... go to www.stackltd.com for full specifications...
Performance Features for Dash Display Systems
(Standard on some models)
Performance Meter & Predictive Lap Timing System
1
2
Sequential Shift Light Module
3
All Stack Dash Displays can drive the new Sequential Shift Light
Module. Using the display menus, each of the 5 shift lights can
be independently programmed to a specific RPM value, to provide
complete flexibility. The Sequential Shift Light connects to the dash
harness with just 3 wires, and is ideal for dashtop mounting.
(ST539)
4
Lap Timing System
Enables the driver to experiment with different
lines through corners, with immediate visual
feedback
Running Lap Time:
Enables the driver to optimise qualifying, by
giving early predicition of a fast lap, or a lap
off the pace, which should be aborted.
Lap Time Memory
3
Predicted Lap Time:
Shows potential lap time when the driver
cannot get a clear flag to flag lap in.
4
Performance Meter :
Functions as an in-car coach, continually setting pace for the driver to beat, and displaying
how much time is lost each time a mistake
is made.
Available for ST8100M and ST8130M systems only this feature
records laps by session and indicates the time of the fastest lap
each session.
Displays the time into the current lap.
Displays the current prediction of the next
lap time.
Graphically displays the time difference
between the current and best lap as an easy
to read bar graph.
ü
ü
ü
ü
ST8100M-AR
8
ü
ü
ü
ü
ü
ST8130
8
ü
ü
ü
ü
ST8130P
8
ü
ü
ü
ü
ST8130M
8
ü
ü
ü
ST8110SR
8
ü
ü
ü
ST8816S
8
ü
ü
ü
ü
Option.
Option.
ü
ü
Option.
ü
ü
ü
ü
Option.
Option.
ü
ü
ü
ü
Option.
Option.
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Option.
Option.
* See Performance Features section above for more information.
Performance Meter Display
ü
ü
Predictive Lap Timer Display
ü
Option.
Lap Memory
ü
ü
Lap Timing (ST546)
ü
8
Sequential Shift Light
(ST539)
Battery Volts
ü
ST8100-AR
Option.
CAN ECU Link Option
Oil Temp.
ü
ü
8
3-axis G Sensor
Water Temp.
ü
8
ST8100M
Air Temp. Option (ST765)
Fuel Pressure
ü
ST8100
Boost Pressure
Oil Pressure
ü
RPM
ü
Total Inputs
Speed (ST670)
Odo & Tripmeter
Specifications
Data Logging Option
2
Displays the fastest previous lap time.
PC Download Kit
1
Brake Bias Display
The lap timing receiver simply plugs into the standard dash wiring
harness. When the vehicle passes the track side beacon the lap
time “pops up” in the graphic display with an accuracy of 1/100th
of a second. At any time the driver can select the Lap Time Display
layer to show the Last Lap Time, Best Lap Time and number of
laps driven.
Best Previous Lap Time:
Option.
ü
ü
Option.
Option.
ü
Option.
Option.
Option.
ü
Option.
ü
Option.
Option.
Dash Displays
Simply plug this speed sensor into the wiring loom to enable speed
to be displayed on the LCD readout.
(ST670)
®
ü
STACK
STACK
STACK
Speed Sensor
www.stackltd.com
www.stackinc.com
ST700 Dash Displays
The ST700 Dash Display systems integrate tachometer, sequential shift light and voltmeter
in a single 80mm instrument. Standard options include speedometer, lap timer and two
pressure or temperature gauges. In addition the ST700 can be fitted with a range of
performance options, including an acceleration timer, infrared lap timing system, split time
memory and straight and corner speed readout. Standard features include...






Intelligent Alarm System
Adjustable day & night backlighting to suit ambient light conditions.
Fully sealed against water and dust to IP67.
Peak value ‘Tell-Tale’ memory is provided on all monitored parameters.
Configurable for all vehicle types and negative earth ignition systems.
Supplied with mounting bracket, switch kit, separate professional
wiring loom and user manual.
1 year Competition Warranty.
Neutral Gear Indicator
Sequential Shift Light
Configurable Inputs*
ST747
ST769
Intelligent alarms are provided on all of
the monitored parameters. Alarm levels
are adjustable to suit the individual vehicle
requirements.
The dash can be simply connected to the
neutral position switch of any sequential
gear box - requires ST918051 harness.
The Sequential Shift Light features
ultra bright LED’s that can be set to
operate in 4 different shift light patterns
- Sequential, Sequential blink, bar and
simultaneous modes. Each light can be set
independently and brightness is adjustable
to suit the ambient light conditions.
The ST700 features two configurable
channels that can be set up for a pressure
(oil, fuel, boost or general purpose) or a
temperature (oil, water, air, differential,
axle or general purpose). Choose between
standard and solid state sensor options.
* requires optional analog sensor harness ST918049
ST700 Optional Performance Features
Lap And Split Time Memory
Performance Upgrade
The lap timing receiver simply plugs into the standard
dash wiring harness. Each time the vehicle passes the
track side beacon the lap time “pops up” on the graphic
display to an accuracy of 1/100th of a second.
This feature records 75 Lap and Split Times (if Split
Timing is activated) to help the driver evaluate their
(ST7090)
consistency.
The Performance upgrade consists of the Split Time
system and the Straight and Corner Speed readout
options. This upgrade provides real-time information that
allows the driver to evaluate his own performance.
(ST7093)
(ST546)
Acceleration Timer
Speedometer, Odometer & Tripmeter
This feature will record Standing 1/4 mile/400m time,
and acceleration/deceleration time between any chosen
speeds. Requires ST670 Speed Sensor.
(ST7095)
This option provides a street legal speedometer
display readout with trip and odometer. The user can
select MPH or km/h and miles or kilometres.
Requires Speed Sensor (ST670)
(ST7094)
Requires ST670 Speed Sensor and ST546 Lap Timing
system.
Speed Sensor
Simply plug this sensor into the wiring loom to display
(ST670)
speed on the LCD readout.
ST700 System Specifications
Model
Speed
(ST670)
ST700
ST700M
ST700SR


RPM
Batt.
2x Config.
Channels*
Neutral
Indicator**
(ST918051)









Option
Option
Option
Lap Time
(ST546)
Lap Memory
(ST7090)
Perf. Upgrade
(ST7093)



Accel. Timer
(ST7095)
Odometer
(ST7094)

Option
Option

Standard dial faces; 0-8000 RPM, 0-4-10500 or 0-6-15000 RPM, choice of black or white dial face.
Optional dial faces (add P.O.A.); 0-10750 or 0-3-13000 RPM, choice of black or white dial face.
ST700 sensor options; Note these are not included with the dash system and must be ordered separately, with ST918049 Sensor Harness.
®
STACK
STACK
STACK
Dash Displays
(Standard on some models)
Lap Timing System
www.stackltd.com
www.stackinc.com
10 bar/150 psi Pressure Sensor
M10
(ST744K)
150o C Fluid Temperature Sensor
M10
(ST762K)
-20 to 50o C Air Temp Sensor
M10
(ST765K)
(ST747-M10)
Solid-State Sensors
10 bar/150 psi Pressure Sensor
M10
-20 to 150o C Temperature Sensor
M6 x 1
0 to 3.5 bar/50 psi Boost Sensor
1/8”NPTF
*Analog channels require optional Analog Sensor Harness (ST918049)
**Neutral Indicator harness requires Analog Sensor Harness (ST918049)
Standard Sensors
1/8”NPTF
1/8”NPTF
(ST745K)
(ST764K)
1/8”NPTF
(ST769)
(ST740)
(ST747-1/8”NPTF)
9 stage sequential
shift light/tachometer
Standard Features include:
 Display integrated into steering wheel (supplied)
 Gear No. indicator integrated into display
 Alarms on all engine parameters
 Peak Value Recall on all parameters
 High intensity LEDs ensure easy readability
 Shift lights can be individually programmed
 Supplied with control module, all sensors, and harnesses
 Mil-spec. connectors
 Fully compatible with Stack Data Acquisition systems
270 mm/ 340 mm steering wheel
options
The 9 sequentially illuminated ultra-bright shift lights provide a precise indication
of engine RPM, and rate of change of RPM, enabling the driver to perfectly
anticipate gear shift points. Each shift light can be individually programmed
for a specific RPM value.
270 mm wheel
Different coloured LED readouts
enhance reading “at a glance”
Separate red and green LED
readouts enable the driver to
instantly identify specific information of interest.
340 mm wheel
Model
ST8600
ST8600M
Speed
RPM
(ST670)
Oil
Pres.
Fuel
Pres.
Option 






Water
Temp.


Oil
Battery
Temp.




Gear No.
1
2
Lap Time
3

1 Requires appropriate gear position sensor,
2 Requires appropriate gear position sensor, or RPM & Speed to be monitored
3 Requires Manual (ST5097) or Infrared (ST546) lap timing kit
ST8850 SlimLine Configurable Display System
The ST8850 Liquid Crystal Display has been designed to
present driver information in as clear and precise way
possible. Backlit Transflective display technology guarantees
a highly visible display in all environments from complete
darkness to bright sunlight.
The large, 8mm high character, 2x20 display is used for
displaying required values. During alarm conditions the
whole display presents the warning message and associated
alarm value. Simple operation controls enable scrolling
through 6 display pages, with each layer having either 2,
4, or 6 values.
Lap
No.
3

Lap Timing
(ST546)
Performance
Meter
Option


Predict. Lap
Readout
Option

®
STACK
STACK
STACK
Stack, in conjunction with Farringdon, have produced a range of steering
wheel display systems. This product uses the latest digital technology and is
specifically designed for vehicles - such as Formula cars - where a conventional dash system cannot be easily fitted. The system is availbale in standard
specification and as an “M” version that adds a speed sensor, infrared lap
timing system, performance meter and predictive lap timing system to the
standard package.
Steering Wheel Display
ST8600 Steering Wheel Display
www.stackltd.com
www.stackinc.com
Clubman Tachometer











Legendary Stack Stepper-Motor Needle Movement.
Configurable for all negative earth and magneto ignition systems.
Unrivalled Digital Quartz accuracy guaranteed for life.
Peak RPM ‘Tell-Tale’ memory.
User adjustable shift light (lamp not included).
Exceptional reliability.
Fully sealed against water and dust.
Fits standard 80mm cut outs.
LED maintenance free backlighting - white with black dialface / blue with white.
Supplied with mounting bracket, switch kit, and user manual.
1 year Competition Warranty.
Choose From a Range Of RPM Scales And White Or Black Dial Faces
Optional Shift Lights
Dash Top Mount Shift Light
(ST534)
0-8,000 RPM
ST200 0-8000 (Black)
0-4-10,500 RPM
ST200 0-4-10500 (Black)
0-6-15,000 RPM
ST200 0-6-15000 (Black)
ST200 0-8000 (White)
ST200 0-4-10500 (White)
ST200 0-6-15000 (White)
Non-standard dial faces available at extra cost, please call for details.
Panel Top Mount Shift Light
(ST537)
Classic Tachometers
Combining the best in modern technology with “Classic” styling to complement the car’s original design.
Chronotronic™
80mm Tachometers
ST200
Classic Tachometers
Features classic styling and no backlighting.
Other features as ST200.
 Accurate replica of original chronometric
tachometer.
Tachometers
 Stepper-Motor Needle Movement
re-creates ‘chronometric’ motion to
4000rpm.
St200C 80mm
Classic Tachometer
 Chromed brass bezel.
Choose from a range of RPM scales:
0-8000
0-10000
0-12000
 Maintenance-free white LED flood
lighting.
This has to be seen to be fully
appreciated!
 0-10000 RPM dial face.
ST230C 125mm
Classic Tachometer
 Peak RPM ‘Tell-Tale’ memory.
Choose from a range of RPM scales:
 1 Year Competition Warranty.
0-6000
 Configurable for all negative earth and
magneto ignition systems.
Action Replay Recording Tachometers
The Action Replay Tachometer provides the ideal introduction to data recording for oval, sprint, hillclimb and drag racing. The
engine RPM for the last run (up to 25 minutes) is recorded in a solid-state memory, and at the touch of a button can be re- played
via the needle on the dial. ‘Re-live’ your last run as many times as you like, to review your shift points, gearing and maximum RPM
around the track. To aid analysis of the playback there are fast and slow modes available. Other features include:





Stepper-Motor Needle Movement.
Peak RPM ‘Tell-Tale’ memory.
Maintenance free backlighting.
Unrivalled accuracy guaranteed for life.
User adjustable shift light.


Configurable for all negative earth ignition systems.
1 Year Competition Warranty.
Supplied with mounting bracket, switch kit, removable
professional wiring harness, shift light and manual.
ST400 80mm Tachometers


STACK
STACK
STACK
®
www.stackltd.com
www.stackinc.com
ST430 125mm Tachometers
Fits standard 80mm cut outs.
Choose from a wide range of
RPM scales:

0-8000
0-3-8500
0-4-10500
0-5-12000

0-6-13000
0-8-16000
0-10-20000

Monster 125mm (5”) dial face.
Fits standard 80mm and Porsche
Tachometer cut outs.
Choose from a wide range of
RPM scales:
0-8000
0-6-13000
0-10000
0-8000
Stack Gauges
Stack’s proven technology is now available in a 52mm gauge! The NEW Stack instruments are available in three types: Stepper
Motor Analogue, Electric Analogue and Mechanical Analogue.
NE
W
Stack Professional Stepper Motor Analogue Gauges
These precision auxiliary instruments combine digital microprocessor accuracy with a highprecision stepper motor needle movement, to provide a new level of accuracy and reliability in
52mm gauges.
They combine the durability and readability of 270° mechanical gauges with the easy installation
and safe operation of conventional electric gauges.
The 270° dialface together with the new white LED backlighting and illuminated needle ensure
excellent readability day or night.
Oil Pressure
ST3301
ST3302
0-7 bar
0-100 PSI
Fuel Pressure
ST3303
ST3304








Fuel Pressure
0-1 bar
0-15 PSI
ST3305
ST3306
0-7 bar
0-100 PSI
52mm diameter
Fast, smooth stepper motor needle drive
270° full sweep movement for excellent readability
Remotely mounted solid-state sensors keep hazardous fluids in
the engine compartment
Better than 2% accuracy
All-electronic design for maximum reliability
White LED through-the-dial backlighting
White LED illuminated needle
Water Temperature
ST3307
ST3308
40-125°C
100-260°F
Oil Temperature
ST3309
ST3310
60-140°C
140-280°F
All gauges come complete
with wiring harness and
associated sensor (except for
fuel level gauge).
Boost Pressure
ST3311
ST3312
-1.0 to +2.0 bar
-1.0 to +2.0 PSI.
Exhaust Gas Temperature
ST3313
ST3314
Fuel Level*
0-1100°C
0-2000°F
ST3315
Battery Voltage
ST3316
8-18 V
*Fuel Level gauge has 7
pre-set and a universalprogrammable calibration, to
suit all normal tank sensors
with a resistance range of
0-280ohms.
Electric Gauges
0-7 bar
0-100 PSI
Water Temperature
ST3207
ST3208
Oil Temperature
40-120°C
100-250°F
ST3209
ST3210
60-150°C
140-300°F
Boost Pressure
ST3211
ST3212
-1.0 to +2.0 bar
-15 to +30 PSI
Battery Voltage
ST3216
8-18V
Mechanical Gauges
This range of gauges have been specifically designed for vehicles
with no or low powered electrical systems.




Bronze bourdon tube 270° sweep movement
White LED through-the-dial backlighting
White LED illuminated needle
52mm diameter
Oil Pressure
ST3101
ST3102
0-7 bar
0-100 PSI
Water Temperature
ST3107
ST3108
50-115°C
120-240°F
Boost Pressure
ST3111
ST3112
-1.0 to +2.0 bar
-1.0 to +2.0 PSI
Wideband Lambda Gauge
This is the ultimate tuning aid! Dual digital and radial LED displays provide
accurate real-time readout of either air/fuel ratio or lambda (userselectable). A 0-4Volt analogue output can be connected to a data-logger
or to an ECU to provide real-time closed-loop feedback for improved
mapping. Supplied complete with wiring harness and includes Bosch sensor.
Wideband Lambda Gauge
ST3401
 0-4V Data Logger or ECU output
 User-selectable Air/Fuel or Lambda real time display
 Programmable Alarm warns of dangerous lean condition
 Peak Recall of leanest value during last run
 Selectable for all fuel types with AFR from 6:1 to 20:1
 52mm diameter
®
STACK
STACK
STACK
Oil Pressure
ST3201
ST3202
Gauges
These electric auxiliary instruments feature advanced 90° air-core movements and simple 3-wire installation. Electrical sensors keep hazardous fluids in the engine
compartment. White LED backlighting and illuminated needle ensure excellent readability day or night. Supplied complete with wiring harness and associated sensor.
www.stackltd.com
www.stackinc.com
STACK
STACK
STACK
®
www.stackltd.com
www.stackinc.com
Stack Ltd.
Bicester, Oxon OX26 4UL, U.K.
Tel: +44 (0)1869 240404
Fax: +44 (0)1869 245500 Email: sales@stackltd.com Stack Inc.
Toledo, OH, 43697, USA
Tel: 888 867 5183
Fax: 888 364 2609
Email: sales@stackinc.com In the interests of continuous product improvement, we reserve the right to alter without notice the specifications and features described in this leaflet.
This leaflet shall not form part of a contract involving Stack unless stated in writing.