Kam Mood Cluster Instruction manual

Add to my manuals
7 Pages

advertisement

Kam Mood Cluster Instruction manual | Manualzz

Mood Cluster

RGB LED wash effect with cluster & firework effects

9w RGB LED backwash effect with laser cluster and firework effects

Sound-to-Light, Auto, DMX and Master/Slave modes

8 channel DMX512 operation

XLR DMX in and out

Linkable Master/Slave in Sound-to-Light mode

40mW green laser / 100mW red laser

9w RGB LED wash effect

Numerous patterns available for selection

Fan cooled operation & tough metal chassis

Adjustable hanging bracket

Key operated power control

For the latest instruction manual updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: [email protected] • Web: www.lambaplc.com

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change.

© COPYRIGHT LAMBA plc 2009. E&O E.

INTRODUCTION

Thank you for purchasing the KAM LED Mood Cluster.

To optimise the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. The KAM LED Mood Cluster has been designed to create amazing laser effects. Please keep these user instructions in a safe place for future reference.

This unit has been tested at the factory before being shipped to you. There is no assembly required.

WARNING

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to high temperature, rain or moisture.

Unintended reflections of the laser beam from reflective or metallic surfaces can be dangerous. Do not touch the laser aperture. When cleaning the laser Aperture, please use a soft cloth.

Laser Class 3B product. National regulations must be adhered to at all steps of installation. These can be downloaded from the website www.kam.co.uk

(In Germany apply DIN 56912 and BGVR LASER note: additional regulations may apply).

Always replace the fuse with exact same type because anything other than the specified fuse can cause a fire, electric shock, damage your unit, and will void your manufactures warranty. This appliance must be earthed.

This appliance should be used by qualified personnel only.

UNPACKING YOUR NEW KAM PRODUCT

Carefully inspect your laser, as you unpack it. If any damage is evident, please notify the supplier you purchased the unit from immediately. For safety reasons do not use the unit if any damage has occurred during transportation.

CONTENTS: Laser, mains lead, user manual and safety keys.

DMX-512 CONNECTION BETWEEN FIXTURES

The fixture is equipped with 3-pin XLR sockets for DMX input and output. The sockets are wired in parallel. Only use a shielded twisted-pair cable designed for 3-pin XLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another.

OCCUPATION OF THE XLR-CONNECTION

BUILDING A SERIAL DMX-CHAIN

Master / slave no controller

Set the master unit to desired effect, use the menu button, followed by the up and down buttons to select desired master effect.

For example:

ASr Auto mixed Slow laser effect with random order with manual control of led wash effect

Then press the enter button to confirm selection

To set slave unit

Use the menu button and the up/down button to select “SLA”

Press the enter button to confirm selection.

Both units will now react the same (only one master unit should be set as master all other units to be set as slave)

Using DMX controller

Each fixture needs to have a DMX start address to receive the data from the controller. The DMX address number, which could be read from rear panel of each fixture and is between 000~511. Each unit uses 8 DMX channels.

If all units connected are to be controlled exactly the same, each unit must have the DMX start address set the same.

For example, set all units to channel 001.

Use the menu button and then the up/down buttons to select the desired DMX start address, press enter to confirm your selection

Use a DMX cable to link the units together via the DMX in/out sockets on the rear panel. See above diagram.

Individual Control

To have DMX control over individual units each unit will need an individual start address. Each unit uses 8 DMX channels.

As before using the menu button then up/down set the desired DMX address. For example, unit 1 set to 001 unit 2 set to 009 etc. Adding 8 channels each time. Make sure no channels overlap.

Use a DMX cable to link the units together via the DMX in/out sockets on the rear panel. See above diagram

RIGGING THE FIXTURE

CAUTION: Please consider the respective national norms during the installation! The installation must only be carried out by an authorized employee or dealers! When installing the device, make sure there is no highly in inflammable material (decoration articles, etc.) in between a distance of min 0.5m.

FRONT PANEL

NO. NAME DESCRIPTION

1

Laser

Aperture

The laser effect output aperture.

NEVER LOOK INSIDE THE

FIXTURE THROUGH THIS

APERTURE WHILE FIXTURE

IS OPERATING.

LED Aperture The LED effect output aperture. 2

REAR PANEL

NO. NAME

1 Main Power Input

2 Power Switch

3 Key Switch

4 Interlock

5 DMX input

6 DMX output

7 Microphone

8 LED Speed

9 Mic Sensitivity Knob

9 Mic Sensitivity Knob

10 Control Panel

DESCRIPTION

IEC socket and integrated fuse holder.

ON and OFF switch

Safety key switch unit will not operate with this turned off

Used to connect an optional emergency stop button. When the contact is closed the laser will Black-out immediately. This must be wired by a qualified engineer

3 pins male XLR connector

3 pins female XLR connector

To detect the music/sound signal

LED effect rotating speed

Turning this knob clockwise increases the sound sensitivity

Turn the knob (potentiometer) until the laser works in sync with the music.

To control the fixture with digital LED display, check more information on CONTROL

& FUNCTION

Forced air fan cooling

Attach safety chain or rope to this point

11 Cooling

12 Safety eyelet

OPERATING MODE

When laser is powered on, LED monitor on rear panel shows the current operating standalone mode or

DMX address of DMX mode. With help of LED control panel, it is very easy to set and change the operating mode of laser. After every resetting and saved, the new mode information will be shown on LED monitor at next power on.

Mode/Function Option, to choose the operating mode of laser.

Confirmation - to confirm all settings or change of LED control panel.

UP/DOWN, to change operating mode, parameter or DMX address.

Standalone pre-programmed laser show

Press FUNC to enter the mode option. Keep pressing until the LED panel shows one of the following:

ArA, ASr, AFd, ASd, SrA, SSr, SFd, SSd.

Press UP or DOWN to select your favourite Standalone mode as above. Press ENTER to confirm the setting. The laser is working in stand alone. Each time when you turn on your laser, it will default to this setting.

In standalone mode, press the function button to choose a different program and the display will flash. Use the up and down buttons to select the desired mode then press enter to confirm.

DISPLAY STAND ALONE MODE LASER EFFECT

ArA Mixed laser effect show automatic mode with manual control of led wash effect

ASr

AFd

ASd

SrA

SSr

SFd

Use led colour choice section to change led colour

Auto mixed Slow laser effect with random order with manual control of led wash effect

Use led colour choice section to change led colour

Auto Fast dot laser effect with manual control of led wash effect

Use led colour choice section to change led colour

Auto Slow dots laser effect with manual control of led wash effect

Use led colour choice section to change led colour

Sound activated rAndom mixed laser effect with manual control of led wash effect

Use led colour choice section to change led colour

Sound activated Slow random mixed laser effect with manual control of led wash effect

Use led colour choice section to change led colour

Sound activated Fast moving dots laser effect with manual control of led wash effect

Use led colour choice section to change led colour

Sound active Slow moving dots laser effect with manual control of led wash effect SSd

Use led colour choice section to change led colour

LED colour choice

Press FUNC to enter mode option.

Keep pressing until the LED panel shows either one of LEd,Loo,rAn,-r-,-Y-,-G-, -C-, -b-, -P- & -W-. colours explained in grid below.

Press UP or DOWN to select your favourite LED colour as above. Press ENTER to confirm the setting.

The LED will be in the colour which you selected. Each time you turn on your laser, it will default to this colour option.

In the COLOUR CHOICE setting, the LED COLOUR that you are going to choose will flash. Press UP or

DOWN to change the LED colour, you will have 10 different LED colour modes. Their display and effects are listed below:

DISPLAY LED COLOUR DISPLAY LED COLOUR

LEd LED Colour -G- Green

Loo rAn

Colour Looping

Colour Random

-C-

-b-

Cyan

Blue

-r-

-Y-

Red

Yellow

-P- Purple

White

Master/slave mode

Press FUNC to enter mode option. Keep pressing until the LED panel shows SLA. Press ENTER to confirm the setting.

The laser is working in slave mode. Connect master laser and slave lasers with DMX cable, the SLAVE lasers will do exactly what the master laser does.

DMX mode

Press FUNC to enter MODE OPTION

Until the LED panel shows 001.

Press ENTER to confirm the setting.

The laser is working in “DMX MODE”. With help of UP/DOWN button, change the number to the desired

DMX start address.

DMX protocol

CHANNEL

2

5

1 - MODE

– ROTATION SPEED

AND DIRECTION

3 - VIBRATE

4 - FLASH

– COLOUR MODE

6 - STROBE

7 - LED COLOUR

MODE

To activate CH 7 –

CH8 value must be set to 4

006-255

000-036

037-072

073-108

109-144

145-180

181-216

217-255

000-127

128-255

000-025

026-050

051-075

076-100

101-125

126-150

DMX VALUE

000-025

026-050

051-075

076-100

101-125

126-150

151-175

176-200

201-225

225-255

000-128

129-138

139-255

000-255

000-005

Laser Black Out

DESCRIPTION

Mixed laser effect Auto show with rAndom led

Auto mixed Slow laser effect with random led

Auto Fast dots laser effect

Auto Slow dots laser effect

Sound activated rAndom mixed laser effect

Sound activated Slow random laser effect

Sound activated Fast moving dots laser effect

Sound active Slow moving dots laser effect

DMX MODE

Anti-clockwise Rotation

Stop

Clockwise Rotation vibrating Range

Stop

Flash

Black Out

Red

Green

Red & Green (To alternate colour use ch6)

Red and green, to strobe Green use ch6 also

Green and red to strobe red use ch6

Both Red and Green to strobe use ch6

NO Strobe

Speed of strobe

No Strobe

White

Purple

Blue

Cyan

Green

To adjust speed use CH8

8 - LED STROBE

151-175

176-200

201-225

226-255

000-003

000-255

Yellow

Red

Looping Colour Strobing

Random Colour Strobing

NO Strobe

Fast to Slow

LASER EMISSION DATA

Laser Classification

Green Laser medium

Red laser medium

Beam diameter

Pulse data

Divergence (each beam)

Divergence (total light)

Laser Power

Class 3B

DPSS Nd:YVO4, 532nm

LD GaAlAs 650nm, typical

<5mm at aperture

All pulses < 4Hz (>0.25sec)

<2 mrad

<160 degrees

Red>100mW, Green>40mW

* As measured under IEC measurement conditions for classification.

LASER COMPLIANCE STATEMENT

This laser product complies with EN/IEC 60825-1 Ed 2, 2007-03, and US

FDA/CDRH FLPPS via the terms of Laser Notice No. 50 dated June 24, 2007.

SPECIFICATIONS

Mains Input: AC100-240V, 50/60Hz

Fuse: 250V 1.6A Slow Blow (20mm Glass)

Total Power: 25W

Music Control: Internal microphone

Laser Power: 40mW 532nm Green CW

100mW 650nm Red CW

Laser Classification: Class 3B

Laser Safety Standard: EN60825-1 2007

Condition Temperature: 10~40 ℃

DMX Connections: 3 pins XLR Male/Female

DMX Channels: 8 channels

Measurement: See diagram below

N Weight: 2.8 Kg

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement