advertisement
LCD/LED
TELEVISION
1st proof - 15-7-13
SANSUI COMBO - LED (1100098898) 13-7-13
Shri. Ganesh Lasane sir / Shri. Snehal Sir
MESSAGE FROM THE VICE CHAIRMAN & CEO
Dear Customer,
It gives me great pleasure to welcome you to the SANSUI family.
Our sincere endeavour is to provide you with best quality products & service support, which lay the foundation for a binding relationship with you. One that stands the test of time to grow stronger with our every interaction.
At SANSUI, we have set ourselves a goal to continuously challenge ourselves to contribute towards your happiness. That’s how with extensive research and creativity we present a whole new range of products - designed with superior technology in both picture and sound - so that nothing (else) sounds better.
Warm regards,
(Vice Chairman & CEO)
1. INTRODUCTION.......................................................................................... 2
2. WARNING AND SAFETY PRECAUTIONS................................................. 2
3. ANTENNA AND EXTERNAL EQUIPMENT CONNECTION........................ 3
4. NAMES AND FUNCTIONS OF CONTROLS ON SET................................. 4
5. NAMES AND FUNCTIONS OF CONTROLS ON REMOTE........................ 5
6. BATTERY INSTALLATION.......................................................................... 8
7. PICTURE MENU......................................................................................... 8
8. SOUND MENU............................................................................................ 9
9. CHANNEL MENU........................................................................................ 9
10. SETTING MENU.........................................................................................10
10.1. EASY CONNECT & DEVICE MENU INFORMATION..............................10
11. PARENTAL MENU....................................................................................... 11
12. MULTIMEDIA GUIDE BAR INFORMATION................................................12
13. MULTIMEDIA SUPPORT FORMATS..........................................................12
14. TECHNICAL SPECIFICATION....................................................................14
15. TROUBLESHOOTING................................................................................15
NOTE : Pictures and OSD shown in this User Guide Book are just for representation.
Actual product may look differ than representation.
Product disposal Guidelines:
For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection center, registered dismantler, recycler, service center when disposing of this product.
In case of further assistance, you may contact nearest authorized service center.
Or Please see the Company website for further information on collection centers etc.
Visit-http://www.sansui-india.com
( )
Thank you for choosing our product. You can use it as a color television or as a PC monitor. To be able to make use of all application options, we recommend that you should read this operating manual carefully and keep it somewhere where you have quick access to it, if required.
Do not touch any parts in the set and do not make changes to any settings not described in this operating manual.
The LCD/LED screen is a high-tech product consisting of more than 900000 control elements.
Any non-active red, blue or green spots that might appear on the screen occasionally have no effect on the performance of the screen.
Cleaning :
For safety, remove the AC plug from the wall outlet before cleaning the set.
Clean the dust on set by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners or liquid containing benzol, petroleum or a chemicals.
AV OUT ANT IN AV OUT
ANT IN
ANTENNA CONNECTION: -
Connect Antenna cable to the ANT IN Socket on rear of the TV. For Good operation of the set, good signal is required. In the strong signal area, an indoor antenna could be used, otherwise an outdoor antenna should be used
Note: - The aerial cable should not be bundled to the power cord.
YPbPr
L IN 1 R IN 1 V IN 1
YPbPr INPUT
L1in R1in V1 in
CD/DVD Player
AV INPUT
COMPONENT (YCbCr/YPbPr) DVD INPUT: -
1. Connect the component outputs (YCbCr / YPbPr) of DVD player to the component (YPbPr) input of the TV.
2. Connect audio outputs (L/R) of a DVD player to the audio input YPbPr.
3. Press the PLAY button on the DVD player.
AV INPUT: - 1.Connect the composite VIDEO output of player to AV1.
2. Connect audio outputs (L/R) of a player to the audio input AV in.
3. Press the PLAY button on the Player.
Note : Selecting a Source
Press TV/AV key on remote or SOURCE key on front panel keypad. A source OSD will appear to select a source press OK/Right or Left key on the remote or VOL + key from front panel. Press TV/AV key or source key repeatedly to change and select source. Up/Down key on the remote or CH+/- on front panel can be used to change sources.
VGA INPUT
HDMI
VGA
Audio in
HDMI INPUT
VGA INPUT: - 1. Connect the VGA cable from the monitor output socket of the PC to the VGA IN socket of the TV.
2. Connect the audio cable from the PC to the VGA Audio
IN socket of the set.
3. Switch on the PC and PC screen appears on the TV set.
The set can be operated as PC monitor.
Note: - A.
If the set is cold, there may be a small flicker when the set is switched ON. This is normal, there is nothing wrong with the set.
B.
Some dot defects may appear on the screen, like Red/
Green/Blue spots. However, this will have no impact or effect on the TV/Monitor performance.
HDMI INPUT: -
1. Connect the HDMI(High Definition Multimedia Interface) cable from the DVD HDMI
Output socket to the HDMI socket of the TV.
2. Set the HDMI mode in DVD Player (Refer User Manual of DVD Player).
Note: -
TV can receive the Video and Audio signal simultaneously by using HDMI cable.
R L VIDEO
AV OUT
ANT IN
USB
HDMI
AV OUT: -
This connection is used for connecting the TV/AV, signal from TV SET 1 to TV SET 2.
MULTIMEDIA: -
Connect / Insert standard USB and select
Multimedia source on source OSD by pressing TV/AV key.
Press OK / Right key on remote, connected USB is listed, press OK to enter in selected USB Multimedia. Similarly front panel keys CH+/- and VOL+ can be operated as Up/Down and OK/Right keys on remote respectively.
NOTE: - CH +/ CH - keys on Remote are represented by CH+/CH- on the TV set.
VOL+/VOL- keys on remote are represented by VOL+/VOL- on the TV set.
4. NAMES AND FUNCTION OF CONTROLS ON SET
A) Front Panel Control/Keys (Optional)
1) VOL+
2) VOL-
3) CH+_
4) CH-
5) MENU
9 8 9
6) TV/AV
7) Stand By
8) LED INDICATOR
9) IR SENSOR
10) AC Power in
1
2
3
4
5
6
7
8
9
11) USB
12) HDMI
13) VGA Audio In
14) VGA IN
15) YPbPr In
16) L1
17) R1
18) V1
19) AV Out
20) ANT In
10
YPbPr
11 12 13 14 15 16 17 18 19 20
Note :
1) Above Sketches are just representation. Actual TV set may look differ than these sketches.
2) When press a key on TV key pad i.e. keys from 1 to 7, a key press indicator will appear on the
TV screen. When a key is pressed, the indicator of that key is highlighted. This is to indicate the function of the key you are pressing. (This is an optional feature).
E-SAVER PLAY/PAUSE
ECO
DISPLAY
POWER
TXT
GUIDE
INDEX
INFO
CANCEL
RETURN
MIX
HOLD
REVEAL
REPEAT FREEZE ANGLE
SLEEP
CH
7
0
1
4
2
5
8
3
6
9
MUTE
VOL
PICTURE
QV
ZOOM TV/AV
SOUND
MENU
CH
VOL
PIP/POP PIP-POS PIP-ZOOM SWAP
GUIDE
TXT
REPEAT
MIX
INFO
INDEX
FREEZE
HOLD
RETURN
CANCEL
ANGLE
REVEAL
ECO
CC
SUPAG
ENERGY
METER
SCENE
SELECT
I/II
MTS VCHIP
PICTURE
SOUND
(OPTIONAL) (OPTIONAL)
(OPTIONAL)
NOTE : This is for representation actual remote and ley printing may differ.
5
DISPLAY MUTE
POWER
Turns TV into STANDBY ON / OFF
DISPLAY: - Displays present source information with details of input signal connected.
MUTE: - Turns sound OFF or ON.
1
5
9
TV/AV
SLEEP
PICTURE SOUND
QV
2
6
0
CH
PREV
FR
FF
NEXT
STOP
3
7
ZOOM
VOL
MENU
PIP/POP PIP-POS
4
8
PIP-ZOOM SWAP
SOURCE SELECTION (TV/AV)
Press TV/AV key on remote or SOURCE key on front panel keypad, a source OSD will appear to select a source press OK/Right key on the remote or VOL + key from front panel to select the source. Up/Down key on the remote or CH+/- on front panel can be used to navigate in source list.
SLEEP:- "Sleep timer max time is 120 min in steps of 5,10, 30, 60,120 minutes.
NOTE:- Sleep Timer is deactivated when set is switch to stand by or mains power supply is switched Off.
PICTURE: - Recalls/changes preset picture settings.
SOUND: - Recalls/changes preset sound settings.
This digit is also used for go to time in multimedia in guide Bar.
Selects program number 1 - 200 directly by using direct digit keys.
- To select 1 digit program number press desired program number & wait for few seconds selected program number will appears on screen
- To select 2 digit or 3 digit program number press 1st, 2nd, or 3rd digit within
2 sec. after pressing 1 & 2 digit respectively.
- To enter password to lock or unlock channel and to set New Password.
- To enter Time in Timer Menu and in Multimedia mode in Guide bar.
- Will operate only in TV source for Channel change
QUICK VIEW(Q. V.):Selects to previously viewed channel in TV Source.
ZOOM:- Zoom is for adjusting aspect ratio such as Auto/16:9/4:3/Zoom1/Zoom2 in
RF/AV1/ AV2/YPbPr/HDMI sources and 16:9/4:3 in VGA sources & Auto/16:9/4:3 in Multimedia mode.
CH+/CH– :- Navigate Up/Down the RF channel. & to turn ON TV set from Standby.
VOL+/VOL– :- To increase / decrease the volume level in all sources.
- Navigates vertically up/down through the Menu/Sub menu.
- To enter characters / numbers in program name parameter.
- Navigates Horizontally Right/Left through the Menu/Sub menu.
- To enter in Menu/Sub Menus.
- To navigate the letters in program name parameter.
- To set the time.
- Select source by Right arrow key.
- Increase/Decrease the value of selected items and to set the
parameter On/Off.
OK:- - To enter in Sub menu.
- Enter to edit program name parameter.
- Select source.
MENU: - To Select menu OSD window and to Return from Existing menu OSD.
PIP/POP: This key/feature is Not Applicable.
PIP-POS: - This key/feature is Not Applicable.
PIP-ZOOM: - This key/feature is Not Applicable.
SWAP: - This key/feature is Not Applicable.
PREV (PREVIOUS): - PREV key is used to select the previous track/item in multimedia source and in Easy Connect feature in HDMI source.
FR (FAST REVERSE): - FR key is used for backward the playing track / item by the speed of (X2, X4, X8, X16)
FF (FAST FORWARD): - FF key is used for forward the playing track/item by the
the speed of (X2, X4, X8, X16)
NEXT: - NEXT key is used to select next track/item for play in multimedia source.
STOP: - Press this key to stop the playback and press Play to resume the playback
again . In Easy connect in HDMI source, select the last viewed file and then press Play to resume. To view images as thumbnail this keys can be used.
6
USB / PIP RELATED
KEYS (OPTIONAL)
TELETEXT RELATED
KEYS (OPTIONAL)
PLAY/PAUSE
GUIDE
INFO
RETURN
CANCEL
ECO
REPEAT
FREEZE
ANGLE
CC
(RED KEY)
(GREEN KEY)
(YELLOW KEY)
(BLUE KEY)
ENERGY
METER
SCENE
SELECT
TXT
INDEX
MIX
HOLD
REVEAL
SUPAG
PLAY/PAUSE:
-
Press this keys to play or pause track/item in multimedia source & in Easy Connect feature.
TXT: -Used to enter "Teletext mode" (analog and digital). In analog mode press repeatedly to
GUIDE: -
When playing the multimedia file and in Easy
Connect mode in HDMI source, press [GUIDE] key. The task bar will show for guiding the Multimedia and Easy connect operation in HDMI source. access-full page text picture and text, text and text and off.
INFO: -
Use this key to view the details of the
INDEX: - Used to get to text a-z index page.
Multimedia file you are playing Music/Photo/Video. This will display the information of that file in separate window.
CANCEL:- Analog TV text option
To exit from this Info Window, press OK key on CANCEL icon.
RETURN:-
Use this key to return to main multimedia menu while playing a track/item.
used to temporarily display TV picture until text page refreshes, gives notification of content change on screen.
ECO: -
This key provides the different power savings modes. The current mode is displayed with ecovision symbol on the screen, in audio only mode display is off
MIX: - Mix. TV picture and text as an overly (analog only) and only audio is on. Press Menu key to exit audio only HOLD: - Used to freeze the sub mode.
page on screen, press again to
REPEAT: -
Press REPEAT on remote ,then in guide bar release (only used in analog text mode).
menu the symbol of none, one ,all will show one after another for repeat sequences. While playing image/ video the repeat options are displayed on the screen and
REVEAL:- Use this key to display can be changed by pressing this key.
/height information in certain text
FREEZE: -
This key is used to Freeze the moving picture. To exit again press Freeze key. Not effective in multimedia.
pages-quiz game solution.
CC: - Display the consumer electronics control menu.
ANGLE: -
This key is used for displaying the images in
Different angles 90/180/270/360 degree, when images are viewed in multimedia.
FAVORITE: - RED KEY, GREEN KEY, YELLOW KEY,
BLUE KEY are the favorite keys used for selecting favorite channels for four users in TV source. Use this key to set/clear a channel from favourite list.
ENERGY METER / E-SAVER: - Use this key to
display the energy saving of the TV. The energy meter is displayed on the screen with the current energy saving. Not effective in multimedia source.
SCENE SELECT:- This key/feature is Not
Applicable.
SUPAG: -This key can be used for subpage index display.
I/II: -If received signal is NICAM, by pressing this key sound can be selected stereo/mono, if received signal is NICAM dual signal sound can be selected dual I/ dual/II and mono.
MTS: -1)Use this key to enable
/disable BTSC sound (mono/streo) for the current program being watched(This Feature is Optional)
VCHIP:- VCHIP function is not available in India.
TELETEXT:-TEXT, MIX ,HOLD,
CANCEL,INDEX REVEAL,
SUPAG ,RED, GREEN, BLUE,
YELLOW are the key’s for teletext function.
Note : Teletext, I/II, MTS, VCHIP is not available in India.
I/II
MTS
VCHIP
NOTE: 1.) Teletext is not available in india.
2.) I/II is not available in india.
3.)
Depending up on remote some key may not be available.
7
UM-4”AAA”
UM-4”AAA”
7. PICTURE MENU
Picture mode
This function is used to select the preset picture settings.
(User/Hi-Bright/Vivid
/Sports/Cinema)
Contrast/
Brightness/
Saturation/
Sharpness/Hue
Color Temp.
These settings are used to adjust the Contrast(0-100), Brightness(0-100),Saturation
(0-100), Sharpness(0-100), and Hue(0-100) values for fine picture adjustment.
NOTE: Hue is enabled for NTSC channels only.
Use this option to select and change color temperature (Normal/Warm/Cool).
Black Back
Advance
Picture Adjust
This function is used to ON/OFF the black back in no Signal condition.
CTI
This improves color and sharpness of the picture.
DNR
The DNR (Off/Low/Middle/High) reduce the noise by applying
temporal and spatial noise reduction filters to Video data.
Adaptive
Luma Control
Color Improve
This function improves Adaptive Luminance (On/Off).
The Color improve (On/Off) adjust the color.
Auto Setting
H Position
V Position
Auto setting allows the PC screen of TV to self adjust. This automatically sets the H-position
V- position, Phase and clock.
If picture is not Ok with auto setting then adjust Horizontal position(0-100)/Vertical position
(0-100) manually to adjust the desired picture settings.
Manual Clock
Phase
Adjust the phase (0-31) and clock(0-100) to remove or reduce picture noise. If noise appears adjust frequency by clock for fine adjustments.
Note : 1) The Geometric menu will be enabled for VGA source only. TV menu is disabled for
VGA Source.
8
8. SOUND MENU
Audio Mode
Equalizer
This function is used to select the preset sound modes (User, Standard, Music, Speech).
Bass
Treble
Balance
Volume
Speaker
AVL
AV Out
AV Out Volume
The Equilizer 120Hz, 500Hz, 1.5KHz, 5KHz, 10KHz, (0-100) can be changed by other user.
The bass function is used to vary the bass level from 0 - 100.
The treble function is used to vary the treble level from 0 - 100.
User can select the left/right speaker intensity by changing balance (-50 - +50).
The main speaker volume can be adjusted by varying this volume bar (0-100).
The main speaker can be made On/Off by this option.
This function is used to for automatic adjustment of volume level(On/Off).
This parameter is Fix and Variable. In Fix mode, the AV out volume is 100 by default. In Variable
mode, the AVout volume can be varied from 0-100 with navigation keys.
9. CHANNEL MENU
Program No.
Displays the current Program number
Color System
Sound System
Change the color system (AUTO/PAL/SECAM) setting if picture is not reproduced properly.
Note : For INDIA Color system is AUTO or PAL
Change the sound system (BG/I/DK) setting if sound is not reproduced properly.
Note : For INDIA Sound system is BG.
Auto Search Press right arrow key or OK key to start searching & tuning all the available channels.
Manual Search
Current
Channel
Store To
Channel
System
Displays the current displayed channel. Press Left/Right navigation keys of remote to change the program no.
Displays channel no. to store the current program. Press Left/Right navigation keys of remote to change the program no.
Displays the Sound system of the currect tuned program.
Search
Fine Tune
Frequency
Press Left/Right Navigation keys of remote to search the program. Also the program
can be selected by directly entering the Program freq. with remote no. keys.
Select this option for Fine tunning the channel with Left right navigation keys at which either Picture or Sound is not clear even after Auto Searching.
Displays the frequency of the current Program (channel).
Program
Edit
User can edit the programs by Delete, Rename, Move, Skip, operation
1.To delete, Navigate to a channel to delete, press1,the channel will be deleted
2.To Rename the channel name press 2 on this option and use Up/Down keys to select letters and Left/Right key to navigate between the characters of program name
3.To Move a channel to other program location, Press digit “3”on remote and navigate to list for location to place this channel. Again press “3” to fix location for this channel.
4. To skip any program, press digit key 4 on that channel, then the channel will be marked in the list. When come out of menu and navigate channels, then the channel will not appear
Favorite
Favorite channels group can be selected with (Red,Green,Yellow,Blue) keys on remote. Navigate to a channel to be included in favorite list, press a color key, the color box same as key pressed appear in front of channel and the channel is included in list to remove the channel from favorite list press same key again, exit menu and press color key, the favorite OSD appear with selected channels
to change favorite channel keep pressing color key, channel will be changed. Four favorite groups can be created with four color keys and same channel can be selected in multiple favorites.
(Favorite feature is optional).
Note : 1) Channel menu will be disabled in other source accept TV source & when Parental-
Disable Search option in Hotel Mode is ON.
9
10. SETTING MENU
Input
Source
Back
Light
Eco
Vision
Select this option for display current input source and source can be changed with
Up/Down navigation keys.
The backlight value can be varied (0-10) This function is used to adjust brightness
level of panel (This feature is optional).
TV is in Normal state when made on. To save the power consumption, select power saving modes as
Power Saving low/Mid/High/Audio only. In Audio Only mode only audio is On and Picture is off. In Audio only mode, all audio controls as Vol+/-, & mute keys on remote will operate to control audio. Press menu key to exit audio only mode.
Switch
On Music
Shop mode
Easy
Connect
User can make this Switch Off/On to enable the switch on music. The music will be played while standby Off/On. (This Feature is Optional).
This feature is used to ON/OFF the Shop mode feature. This displays the TV features with description. This is for use on Shop floor only. (This feature is Optional)
This feature operates only in HDMI source. If a CEC compliant device like Home theater or
DVD player is connected to TV in HDMI mode, then the Player controls can be operated through
TV remote. Below are the sub Menu in Easy connect.(Easy Connect feature is optional).
Easy
Connect
Auto
Turn Off
Press Left/Right navigation keys of TV remote to Switch On/Off
When make this ON, then all other parameters become active.
the Easy Connect feature.
Press Left/Right Navigation keys for ON/OFF of this feature. If make LCD set off, then the connected CEC device go to stand by. If CEC device is made ON then LCD also becomes ON from Stand by.
Device
Search
Device
List
Device
Menu
Press OK key of TV remote to search the Devices connected in HDMI source
It will
show the no. of connected devices.
Press Ok key of TV remote on this option, then it will show the list of devices connected
with the LCD in HDMI source.
When press Ok key of TV remote to operate this feature, then the main Menu disappears and the Easy Connect Guide Menu bar is displayed on screen. The Guide bar can also be accessed with Guide key of Remote.
The details of Easy Connect Guide menu are on next Page.
Software
Update
This is for LCD TV Software update. (For Service only)
Reset
Select this option to reset all Feature, Audio, Video parameters to Default value
10.1. EASY CONNECT DEVICE MENU INFORMATION
Play
Pause
Select this option with OK key of TV Remote to PLAY file in list of connected player
Select this option with Navigation key and OK key of TV remote. This is used to PAUSE
the running file in connected device.
FR
FF
Prev.
Next.
Stop
Power
Select this option with Navigation key and OK key of TV remote. This is used to fast
Rewind the running file of connected player.
Select this option with Navigation key and OK key of TV remote. This is used to Fast
Forward the running file of connected player.
Select this option with Navigation key and OK key of TV remote. This is used to select Previous file in Player list.
Select this option with Navigation key and OK key of TV remote. This is used to select Previous file in Player list.
Select this option with Navigation key when press OK key of TV remote then It will
stop the running file in Player and will return to main menu of the connected player.
By using this option, the connected player can be made OFF to stand by. When the the player is switched OFF, the TV will return to last viewed source. To switch ON the
player again, go to HDMI source and goto Guide bar menu and again select Power option.
10
Home
OK Select
Below options are present on second page of Guide bar. Select with remote navigation key. When select this option with TV remote OK key, then the running media file will stop and it will return to Player Home menu.
This key works to select the Player menu functions and files etc. Press TV remote
OK key to operate this function.
Up
Down
These functions are used to navigate in the Player menu and player functions in Up/Down and Left/Right directions. These controls work same as TV remote navigation keys.
Left Right
Setup
Return
When select this function with TV navigation and OK keys, then it will display the
Setup menu of the connected Player.
This function is used to go to previous menu or screen of the Player, when selected with TV remote OK key.
Note: -
1) The Easy connect guide menu can be accessed from Settings menu as well as Guide Key of TV remote.
2) The above functions may work different depending on player connected with TV.
3) If connected CEC compatible device is not functioning in Easy connect, then kindly check the device settings.
11. PARENTAL MENU
Parent Lock
Switch
Change
Password
Channel Lock
Clear All
Make the parental switch On to lock/unlock the sources (TV/AV1/YPbPr/HDMI/VGA/
Multimedia)/channels (1-200).
Select this option to change the password (default - 0000) Enter new password and confirm the same.
Press DIGIT KEY 2 key to Lock/Unlock the channels (01-200).
Select this option to reset all Parental options to default value.
Hotel Mode
Switch
Change
Password
OSD Display
Disable
Key Lock
Make this switch On to Activate the Hotel Mode options selected by user. When
Switch is Off the Hotel Mode, its options will not Operate.
Select this option to change the password (default - 0000) Enter new password
and confirm the same.
Making this option On, the Display OSD will not appear by pressing Display
Key on remote.
Select this option On, panel keys will not operate.
Disable Search
Max Volume
Power On
Set
Making this option On, the search options/TV menu will be disabled for user.
The main volume is limited by setting MAX volume (0-100), User cannot increase the main volume greater than MAX volume selected.
Power On
Source
Select the power on source (TV/AV1/YPbPr/HDMI/VGA/Multimedia) after the TV ON, the power on source will be same as specified here.
Power On
Channel
Select the power on source (1-200), after the TV ON, the power on source will be same as specified here.
Power On
Volume
By setting the power on volume (0-100), this volume will be set after set gets ON.
Clear All
Select this option to reset all Hotel Mode options to default.
Note :
1) Use Left/Right keys on the remote change the option and up/down to navigate.
2) Press OK/Right key on remote to enter into the submenu.
3) Press CH+/- key on front panel to navigate, Vol+/- key to enter/back and to change option.
4) Default password is "0000" for parental and hotel mode.
5) If any of your CEC compatible device is not connected in Easy connect of LCDTV/LEDTV, thenPlease check your device settings.
11
12.MULTIMEDIA GUIDE BAR INFORMATION
Play/Pause Use this option to Pause the running Media. Again Press the same key to resume/Play the file.
Use this option to Fast Forward FF or Fast Rewind FR the running file.
FR
PREV
FF
NEXT
Use this option to select Next or Previous Media file in your Play list.
STOP
All
Set A
Playlist
INFO
Slow
Step
Move
Rotate
Music
AB
Goto Time
Zoom IN / OUT
Use this option to Stop the running Media file. If press OK on this icon, then it will return to your play list from current playing File.
Use this option to Repeat the Media files with options as None/One/All files to repeat.
Press OK key to operate. Also can use Repeat key on remote.
Use this option to set the selection points in Media file. Press OK key and select Point
A again Press OK key and select Point B. Now the Video between A and B will repeat again and again. To stop repetitions again Press OK key. Applicable in Video files only.
By pressing OK key on this Icon, will display all Media files present in that particular
Folder i.e. Audio or Video or Photo.
By pressing OK key on this Icon, it will display the Information about the Media file being played. To close this window press Down Navigation Key till Close icon and press OK key on remote
This option is used to slow Forward the Video file in steps of 2X/4X/8X/16X. If select, then the audio will not come. After 16X, the normal Play will resume. Applicable in Video.
This Option is used to move the Video file in steps. For normal operation, again press
Play Key. Applicable in Video files.
By selecting this option, can jump at any timing of the Video i.e. the Video will start from that time of total Video time .Applicable in Video and Music files.
This is used to Zoom in or out the media file. Applicable for Images only. For Video use
Zoom key on remote.
This option is used to move the position of the Image file. This will be used if Image file is Zoomed into big size. Applicable for Image files only..
This option is used to Rotate the Image file clockwise in 90/180/270/360 deg. Used for
Image files Only
This is a short cut for Music filed to play in background with Image files running on screen.
To operate this, first go to Music folder, then select the Music files to be played by OK key. then go to Photo folder. play Photos. Then goto Music Icon and press OK key.
Then the Music will start playing in background of Images. There is no control on background music files. Applicable for Photo folder only.
Note: -
1.) Guide bar will be present permanently in Music Folder with Play list. To exit from this press Return key on remote.
2.) To View Guide bar in Video and Image files, press Guide key on Remote.
13.MULTIMEDIA FORMAT SUPPORT
File Type
Photo:
Video:
Audio
BMP
File Format
JPEG\ BMP\ PNG
MPEG1\ MPEG2\ MPEG4\ RM\ RMVB\
MJPEG\FLV\ H.264
WMA\ Mp3
Image Formats Details
File Format Resolution
JPEG
PNG
15360X8640
9600X6400
9600X6400
Compressed Format
Progressive JPEG
Baseline(Standard)
Baseline(Optimize)
Single Color
16 Color
256 Color
16 Bit
24 Bit
32 Bit
Progressive
Interlaced
File suffix
.jpg\ .bmp\ .png
.avi\.mpg\.mpeg\.dat\.rm\.mp4\.ts\.trp\
.asf\ flv
.wma\ .mp3
Support Range
Only Support 1024x768
Support
Support
Support
Support
Support
Support
Support
Support
Support
Only Support 1200x800
12
Audio Formats Details
File Format Sampling
WMA
Mp3
8K~48KHz
32K~48KHz
Mp4 (AAC)
8K~48KHz
Baud Rate
32K~320Kbps
32K~320Kbps
32K~320Kbps
Audio Channel
Mono, Stereo
Mono, Stereo
Mono, Stereo
Video Formats Details
File Format
MPEG1
MPEG2
MPEG4
RM\RMVB
MKV
MJPEG
Support Suffix
.DAT/.MPG/.MPEG
.MPG
.AVI/.MP4
.RM/.RMVB
.MKV/.MOV
.AVI
Internal Encoder
DIVX,XVID
RV8, RV9, RV10
MPEG1,2,4
Resolution Baud Rate
1920x1080P @ 30P Max 20Mbps
1920x1080P @ 30P
Max 20Mbps
1920x1080P @ 30P Max 20Mbps
1920x1080P @ 30P
1920x1080P @ 30P
640x480P @ 30P
Max 10Mbps
Max 20Mbps
Max 10Mbps
DivX
H.264
FLV
VC1
.DIVX/.AVI
.MKV/.MOV
.FLV
.ASF
MPEG, DIVX, H.264
H.264
1920x1080P @ 30P
Max 20Mbps
1920x1080P @ 30P Max 20Mbps
H.264
VC-1
1920x1080P @ 30P Max 20Mbps
1920x1080P @ 30P Max 20Mbps
Hard Disk Drive3 Support: -
You can also access below type of Hard Disk with existing USB port of TV set
Format: - FAT16, FAT32, NTFS. Capacity: - 500GB
Note :
1. The multimedia features/functions may vary from file to file depending on relative information present in the file.
2. If can't detect the connected device, it would be caused by connected device driver not by TV failure.
3. USB port of device provides 5V & max current 500mA. Because port specs adopted by certain storage device is different from that of standard USB, so it may affect the correct identifications.
4. The reading speed will be variable due to different connected devices & different storage capacities.
5. SANSUI is not responsible if USB device is not supported, nor it is responsible for damage or loss of data.
6. Due to difference of equipment & storage capacity the time need to read information also different. The speed of reading information may slow down temporarily, note that this is not breakdown of this unit.
7. When system is executing your last operation , please do not press function keys continuously, otherwise
it will affect processing speed of system.
8. SANSUI uses the best of the display panels. However there may be bright dots visible, which is not
a defect and does not deteriorate the product performance, viewing and Reliability.
Resolution support :
VGA mode
640x480(60Hz,72Hz,75Hz), 800x600(56Hz,60Hz,72Hz,75Hz),1024x768(60Hz,70Hz,75Hz)
1280x1024(60Hz),1280x768(60Hz),1600x1200 (60Hz)
HDMI
480i(60Hz), 480P (60Hz), 576i (50Hz), 576p (50Hz) 720p (60Hz), 1080i(50Hz,60Hz),
1080P (50Hz,60Hz)
Note: - If abnormal picture is observed on screen make power Off and On.
- The set might be operate abnormally if a non standard video format is selected.
13
14 TECHNICAL SPECIFICATIONS
NOTE
1) Design and specifications are subject to change without prior notice.
2) Stand assembly and Wall Mounting assembly are optional. For more
details please contact service provider.
3) Power consumption mentioned is average with standard picture/sound conditions.
14
15. TROUBLESHOOTING
Manually trail to adjust HV position.
Auto Adjust, try to adjust clock manually.
15
A
B
C
D
BRANCH OFFICES
Marketed by - KAIL LIMITED,
Auto Cars Compound, Adalat Road, Aurangabad,
Maharashtra, 431005, INDIA.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement