advertisement
Artnet-DMX Control System
Artnet-DMX-8
Manual
www.ltech-led.com
Product Introduction
Ethernet Control System based on the Artnet protocol.
Set different network segments to avoid multiple sets Artnet data interference.
Convert the Artnet network data package into DMX512 data.
Adopting high-speed ARM processor, stable and reliable.
Supports RJ45 network interface and 3-pin XLR DMX512 output interface.
With LCD screen display and 4 buttons, convenient operation, intuitive settings.
Standard 1U(19") chassis architecture, convenient installation in the standard cabinet.
Provides 8 standard DMX512 data output port.
Compatible with the light software based on Artnet Protocol, control stage lighting and LED lighting simultaneously.
Connect up to 256 DMX universes to one network.
10/100Mb Ethernet port.
Data activity indicators.
Configurable DMX output refresh rates.
Manage Artnet on broadcast mode or unicast mode.
Widely used in the LED dot matrix and the stage lighting control network in needing lots of DMX512 data.
Suitable for TV station recorded scene, stage performances, entertainment and so on.
warranty
5 years
1
www.ltech-led.com
Technical Specs
Artnet-DMX-8
Power input:
Input signal:
Output signal:
DMX channels:
Current input:
DMX output connection:
Network connection:
5-24Vdc
Artnet
DMX512
8 universe
30mA@12Vdc
3-pin XLR
RJ45
Isolation ethernet port: Total Isolation
Isolation power input: Total Isolation
Working temperature:
Dimension:
-30 ℃ ~65 ℃
L483×W200×H44mm
Package size: L550×W265×H100mm
Weight (G.W): 2600g
Package Contents
www.ltech-led.com
Product Size
The unit : mm
Power Adapter 1pcs
Control System 1pcs
2
Manual 1pcs
440
483
Main Component Description
Menu button
( Exit button ) + Button
Artnet-DMX-8
002.044.056.032
OFF /
Set button
(Save button)
ON LCD monitor
-Button Status lamp
PUSH
2
3
1
DMX 1
PUSH
2
3
1
DMX 2
PUSH
2
3
1
DMX 3
PUSH
2
3
1
DMX 4
PUSH
2
3
1
DMX 5
DMX output 1-8
3
PUSH
2
3
1
DMX 6
PUSH
2
3
1
DMX 7
PUSH
2
3
1
DMX 8
Ethernet DC12V
Artnet input
Power input
www.ltech-led.com
Wiring Diagram
Tube
Spot light
Wall Washer
Spot light
Par light
LED light
Moving head light
8 Universe
CAT5
512CH
Artnet-DMX-8
PUSH
DMX 1
PUSH
DMX 2
PUSH
DMX 3
PUSH
DMX 4
PUSH
DMX 5
PUSH
DMX 6
PUSH
DMX 7
PUSH
DMX 8 Ethernet DC12V
CAT5
CAT5
512CH
CAT5
512CH
……
CAT5
512CH
8 Universe
Artnet-DMX-8
PUSH
DMX 1
PUSH
DMX 2
PUSH
DMX 3
PUSH
DMX 4
PUSH
DMX 5
PUSH
DMX 6
PUSH
DMX 7
PUSH
DMX 8
Ethernet DC12V
CAT5
512CH
CAT5
Ethernet
Switch
CAT5
512CH
CAT5
512CH
……
CAT5
4 www.ltech-led.com
Screen Use
Menu button
(Exit button) + button
Artnet-DMX-8
002.044.056.032
Set button
(Save button)
LCD
Monitor
button
Button Operating Instructions:
Press the menu button in the main interface to enter the menu interface. Press / button to move up and down the menu, press the setting button to set the relative parameter,
Press / can adjust the parameter. Press to save the setting when finished and press to quit the setting.
Main Interface
Artnet-DMX-8
002.044.056.032
NetWork-IP:
002.044.056.032
Network
NetWork-Mask:
255.000.000.000
NetWork-Gate:
002.000.000.001
Universe
Universe(1 4):
001.002.003.004
Universe(5 8):
005.006.007.008
Other Functions of Button:
Testing...
In the main interface, long press to enter test mode (send the dark, light and highlighting jumping data to the 8 ports). Press to quit the test mode.
In the main interface, long press / at the same time to restore factory settings.
Factory Default
Loading ...
5
www.ltech-led.com
Connect ArtNet-DMX-8 To the Computer
This product is compatible with all the ArtNet software in the market, here take MADRIX as an example:
1. Install the Madrix 3 software in the computer, the icon on the desktop :
MADRIX 3
2. Use the equipped adapter to power ArtNet-DMX-8.
3. Connect ArtNet-DMX-8 and computer via the cable.
4. IP Setting: This control system is compatible with random network segment. According to
the ArtNet protocol, 2.X.X.X or 10.X.X.X can be added in the computer ( X means
arbitrary value), methods as below: www.ltech-led.com
5. Open Madrix 3 software, choose“preferences”>" device manager" from menu.
6. In "device manager" dialog, choose "ArtNet" tab, tick “enable” and click search .
Artnet-DMX-8 will be searched.
4.1 Open the Network, click “Properties”
button of the TCP/IPv4 protocol.
4.2 Click “ Advanced”.
4.3 Click “ Add”.
7. Click the tab of "DMX devices", set port status to “ON” if connected successfully. Now, you
can use computer to control lamps via ArtNet-DMX-8.
4.4 Add the IP address 2.X.X.X or 10.X.X.X
(X could be arbitrary value).
4.5 Interface of adding successful, click “ OK ” and exit.
6
*
MADRIX is registered trademarks of Inoage GMbH Co., Inc. in Germany.
7 Update Time: 2016.12.02
advertisement
Related manuals
advertisement