FW1178 User’s Manual

FW1178 User’s Manual

(Product Guide)

Version 4.12(Rev.E)

February 7, 2012

Class A Digital Device (industrial & commercial environment)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to CE and

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

M4049-02 1 Seyeon Tech Co., Ltd

FW1178 User’s Manual

FW1178 User’s Manual

Document Part Number: M4049-02

Document Version: 4.12(Rev.E)

Revised: February 7, 2012

About This Document

This document is prepared for users of FW1178 supplied by Seyeon Tech Co., Ltd. It is assumed that the users are familiar with Microsoft Windows operating systems and Web browsers such as Internet Explorer.

It is also assumed that the users are well aware of how to install and use the network equipment such as

LAN, Hub, router, and having basic knowledge of network terminologies. If you have any questions regarding network installations, please contact your network equipment vendor or network administrator or Internet service providers.

For updated contents, detailed features and other applications from Seyeon Tech, please refer to the user’s manual in CD-ROM provided with the product you purchased, or visit Seyeon Tech’s Internet homepage at http://www.flexwatch.com/ .

Copyright Notice

Copyright © 2012 Seyeon Tech Co., Ltd. All rights reserved.

No part of this document may be reproduced in any form or by any means without the prior written permission of Seyeon Tech Co., Ltd.

Disclaimer

Seyeon Tech Co., Ltd. (Seyeon Tech) Makes no representations or warranties with respect to the contents hereof. In addition, information contained herein is subject to change without notice. Every precaution has been taken in the preparation of this manual, nevertheless, Seyeon Tech assumes no responsibility for errors or omissions or any damages resulting from the use of the information contained in this document.

Trademarks

FlexWATCH ® and FlexWATCH ® Logo are trademarks of Seyeon Tech Co., Ltd.

Windows and Internet Explorer are a trademark of Microsoft Corporation.

All other trademarks belong to their respective owners.

Technical Support

For technical support call, email, or visit our web site.

Telephone: +82-2-2192-6800

Email: [email protected]

Web site: http://www.flexwatch.com

or http://www.seyeon.co.kr

M4049-02 2 Seyeon Tech Co., Ltd

FW1178 User’s Manual

Contents

1.

PRODUCT OVERVIEW ......................................................................................................................... 4

1.1. FW1178 .......................................................................................................................................................................... 4

1.2. K EY F EATURES ................................................................................................................................................................. 5

1.3. T ECHNICAL S PECIFICATION ........................................................................................................................................... 6

1.4. FW1178 P ACKING L IST ................................................................................................................................................ 9

2.

HARDWARE DESCRIPTION .............................................................................................................. 10

2.1. FW1178 ........................................................................................................................................................................ 10

3.

FW1178 INSTALLATION AND BASIC SETUP ................................................................................. 11

3.1. B EFORE I NSTALLATION ................................................................................................................................................. 11

3.2. F ACTORY D EFAULT S ETTINGS ..................................................................................................................................... 11

3.3. I NSTALLING FW1178 .................................................................................................................................................. 11

M4049-02 3 Seyeon Tech Co., Ltd

FW1178 User’s Manual

1. Product Overview

1.1. FW1178

FlexWATCH® 1178 is a stand-alone device transmitting video from built-in PTZ camera over

IP(Internet Protocol) network. There is one type of FW1178 model: DP.

It can transmit up to 30fps@D1 over the existing network. You can monitor video of FW1178 through web browser(ie. MS Internet Explorer), if FW1178 is connected to network. FW1178 supports video compression both Motion-JPEG and H.264 simultaneously so that user can choose appropriate video compression for the purpose. For both Motion-JPEG and H.264, FW1178 provides 6 levels of video quality.

Picture 1 : FW1178-DP-E

M4049-02 4 Seyeon Tech Co., Ltd

FW1178 User’s Manual

1.2. Key Features

Standalone device built-in web server

10M/100M Auto Sensing Ethernet

Configuring and controlling through Web browser

Max 30 fps transmission speed on TCP/IP network

Effective Bandwidth & Bit-rate Control (VBR/CBR) by H.264

Supports Dual Stream (Motion JPEG & H.264)

1ch Voice Encoding / 1ch Voice Decoding

Support Dynamic IP users by IPCCTVDNS server

Support PTZ (Pan/Tilt/Zoom) function

Support Sensor Input, Digital Output

Support Transparent

Built-in 2 way Audio transmission (1ch A-in, 1 A-out)

Encryption function by user authentication

Image transmission function via FTP, Email

M4049-02 5 Seyeon Tech Co., Ltd

FW1178 User’s Manual

1.3. Technical Specification

Hardware

Image sensor

Lens

Minimum illumination

Video related special functions

Video compression

Resolution

Frame rate

(each channel)

Video Streaming

Image setting

Pan/Tilt /Zoom

Audio

LAN interface

Alarm I/O Interface

M4049-02

FW1178-PE

32bit Embedded CPU

NAND Flash 128Mbytes / DDR2: 128Mbytes

Linux version 2.6.xx operating system

Battery backed up real-time clock

1/4”Sony 410K Super HAD CCD

Resolution: 520 TV Lines

[Detail]

S/N ratio: 50dB or more (AGC OFF)

Electronic shutter speed :

1/60 ~ 1/100,000 sec (NTSC)

1/50 ~ 1/100,000 sec (PAL)

White Balance: ATW (1,800K~10,500K),AWC,MWB

IRIS control: Auto & Manual

F1.8-2.8, f=3.8-38

Angle of view: 5.58~51.2 horizontal

Shutter speed: x128, 1/60~1/120,000 sec

Color : 0.7 Lux (F1.8)

B*W : 0.005 Lux (F1.8)

AGC : Low/ High/ Off

Day & Night : Auto / Day / Night (IR Cut Filter Change)

DNR : Low / Middle / High / Off

Motion JPEG

H.264

720x480, 704x480, 352x240, 176x112

Motion JPEG: Up to 30 fps @ 4CIF (Other Stream at QCIF)

H.264: Up to 30 fps @ 4CIF (Other Stream at QCIF)

Motion JPEG and H.264 Dual Streaming (Simultaneously)

Controllable frame rate and bandwidth

Compression levels: 6 (Motion-JPEG, H.264)

Color: color, black & white

Zoom : x10 (digital x10)

Pan : 360°(Endless)

Tilt : 0°~180°(Auto-Flip On) , 0°~ 95°(Auto-Flip Off)

Max speed :

410°/ sec(preset)

0.5°~ 120°/ sec (Zoom Proportional, Manual)

1°~ 180°/ sec(scan)

128 Presets with zoom, focus, blc and 16 digits of title

4 Patterns, 1,000 Commands / Pattern (Approx. 5 minutes in normal operations)

8 bit PCM (G.711-u-low), Sampling rates 8KHz, Mono Audio

1ch in

10/100BaseT Ethernet auto sensing

1 Photo-coupled inputs and 1 Relay output

6 Seyeon Tech Co., Ltd

FW1178 User’s Manual

Audio Input(MIC)

Audio Output(SPK)

Power Over Ethernet

Serial Interface

Security features

Advanced Service

Built-in Motion detections

PTZ & UART Control

Support

Management

Developer support

PWR Supply

PWR Consumption

Operating Environment

Miscellaneous

Simultaneous users

Installation, management and maintenance

Video access from Web browser

Minimum Web browsing requirements

Input Impedence : 4 KOhm

Pantom Power : 3.3 Volt

Gain : 20 dB

Jack : 3.5mm Mono

Output Impedence : 160 Ohm

Output Power : 50 mWatt

Output Voltage : Peek To Peek 1 Volte

Jack : 3.5mm Stereo

None

Two serial ports for console, serial input/output device, PTZ

COM Port is RS-232,

Max Baudrate : 115200 bit/s

Multi user level protection for amera access

PTZ, Alarm I/O

Up to 5.6M memory for Pre/Post alarm buffer

E-Mail, FTP, IP notification, Alarm Notification to e-mail

CGI Call by event or schedule

Accuracy : 12x12=144 blocks

Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive

Built-in PTZ device is controled through AUX

UART control X10 device

Dial in/out via PSTN or GSM modem

Configurable by serial, web or telnet

Remote system update via telnet, FTP OR web browser

Provides HTTP CGI API

ActiveX control development kit

Transformer

Input : 100~240VAC, 1A

Output : AC 24 Volt, 3A

AC 12Volt 1.0A

Temperature : 32° ~ 122°F (0° ~ 50°C)

Humidity : 20 ~ 80% RH(non-condensing)

Freely downloadable NDVR Software

Work with FW-Manager( NDVR S/W)

Dynamic IP support through IPCCTVDNS

Live-cast for up to 16 clients

Installation CD and web-based configuration

Firmware upgrades over HTTP or FTP , firmware available at www.flexwatch.com

Video access from Web browser

Pentium 4, 2 GHz, 2GB(RAM) or higher

Video Card: 256MB RAM, 1024x768 resolution or higher

100Mbps Network Adaptor or faster

Windows XP Pro or later

Internet Explorer 6.x or later

M4049-02 7 Seyeon Tech Co., Ltd

FW1178 User’s Manual

System integration support

Powerful API for software integration available at http://www.flexwatch.com, including

Simple Viewer API, FlexWATCH Control SDK, event trigger data in video stream, embedded scripting and access to serial port peripherals over HTTP/TCP

User can be installed user program daemon for event notification or sending image

Embedded operating system: Linux 2.6

Supported protocols

HTTP, RTP/RTSP, TCP/IP, FTP, Telnet, RARP, PPPoE, PAP, CHAP, DHCP, SMTP client(e- mail), NTP

Applications

(not included)

Included Accessories

Approvals

Dimensions (HxWxD) and weight (1lbs = 454g)

FlexWATCH Manager 16/32/128/256

Power supply 24 V AC / Power cord

CD (User’s Manual, installation wizard and etc)

MIC

FCC : Class A

CE : Class A

RoHS

IP66

141Ø x 140(H) (in mm)

About 1.8kg without power supply

* All specifications are subject to change without prior notice.

Table 1 : FW1178 Data Sheet

M4049-02 8 Seyeon Tech Co., Ltd

FW1178 User’s Manual

1.4. FW1178 Packing List

FW1178-DP (Bracket Separate) 1ea

Power Supply Unit

(24V AC Power Cord)

1ea

CD (User’s Manual, installation wizard and etc) 1ea

Table 2 : FW1178 Packing List

Note: Please check all the listed items are included in your package. For any missing items, please contact your local distributor.

M4049-02 9 Seyeon Tech Co., Ltd

FW1178 User’s Manual

2. Hardware Description

2.1. FW1178

A

Picture 2 : FW1178

A

B

Name

PTZ Camera

BODY Frame

Description

Camera supporting PTZ (Pan/Tilt/Zoom)

Body Frame for Camera

Table 3 : FW1178

B

M4049-02 10 Seyeon Tech Co., Ltd

FW1178 User’s Manual

3. FW1178 Installation and Basic Setup

3.1. Before Installation

Read carefully User's Manual.

Check User’s Network (IP Address, Network Mask and default gateway)

Secure IP address for FW1178.

3.2. Factory Default Settings

The following table shows the factory default condition. Please refer to this when you need to change the values on admin menu.

Factory Default

Admin ID

Admin password

IP address

Network mask

Gateway

Wireless LAN (Option) root root

10.20.30.40

255.255.255.0

10.20.30.1

Disabled

Table 5 : Factory Default

Note: Factory default Admin ID and Password are all lower case letters. You can change the password with Capital letters.

3.3. Installing FW1178

Following steps are the physical installation process for FW1178.

1. Fix the FW1178 in place

2. Connect the FW1178 to the Internet cable through the LAN port.

3. Connect the power supply of FW1178.

After that, you need to follow the steps below.

Network Configuration: Refer to “IP Installer User’s Manual”

Camera Configuration: Refer to “FlexWATCH Admin Menu User’s Manual”

Service Configuration: Refer to “FlexWATCH Admin Menu User’s Manual”

M4049-02 11 Seyeon Tech Co., Ltd