After you are familiar with operating your Inogen One G2 at home, you are ready to take your Inogen One G2 on the road.

As always, be a careful driver. DO NOT

RUSH OR HURRY to set up your

Inogen One G2 in the car. Take your time and follow the steps outlined to the right. The Inogen One G2 can operate either by battery or the Universal Power

Supply while in your car, boat, or RV. If using the Universal Power Supply on DC power, the battery will charge.

Make sure your Inogen One G2 is secure before driving.

® 326 Bollay Drive,

Goleta, CA 93117

1-877-4-INOGEN (Toll Free)

1-877-446-6436 (Toll Free)

1-805-562-0515 (International) [email protected]

www.inogenone.com

www.OxygeNation.com

Plug the Universal Power

Supply into the cigarette lighter or auxillary DC power supply.

Plug the Universal Power Supply power output cord into your

Inogen One G2 and position your Inogen One G2 securely inside the car. Operate your

Inogen One G2 as normal.

96-02797-00-01A

®

Place your Inogen One G2 in a well ventilated location.

Ensure the particle filter is in place.

Insert the Inogen One G2 Battery by sliding battery into place and locking at bottom of concentrator.

Connect your Inogen One G2

Universal Power Supply AC cord to the Universal Power

Supply. Connect the Universal

Power Supply to your Inogen

One G2.

Plug the Universal Power

Supply AC cord into the nearest electrical outlet.

Connect the nasal cannula tubing into the metal nozzle on your Inogen One G2.

Oxygen will only be delivered while you are breathing through the nasal cannula connected to the device.

Turn on the Inogen One G2 by pressing the button.

®

Set the flow setting to the flow rate prescribed by your clinical professional. The flow setting can be changed by pressing the triangular flow setting buttons that are marked with “+” and “-” symbols.

Position the nasal cannula on your face and breathe normally through your nose.

www.inogenone.com

www.OxygeNation.com

NOTE: You must operate the Inogen One G2 on AC Power for approximately 3 hours to fully charge the battery. Do not operate on battery until fully charged.