Defender 82-12900 Installation Manual & User Manual

82-12900 U S E R ’ ’ S M A N U A L

10.2" TFT-LCD MONITOR

Installation Guide & User’s Manual

User’s Manual TFT-LCD MONITOR

DIRECTORY

1. MONITOR FEATURE ............................................................................................２

2.1 FRONT PANEL ......................................................................................................２

2.2 REAR PANEL ........................................................................................................３

4. APPENDIX ...........................................................................................................５

4.1 S PECIFICATION ...................................................................................................５

4.2 F ITTINGS C OME A LONG W ITH M ONITOR ................................................................５

１

User’s Manual TFT-LCD MONITOR

1. Monitor Feature

10.2" TFT-LCD Monitor

High display resolution

Desktop install or ceiling mount

With built-in stereo speakers

Support 3.5mm stereo (4PIN) and RCA A/V input

With desktop install stand, tilt 90 degree

With power ON/OFF, speaker volume control and AV channel selection push button

Front panel button control Brightness, contrast, color, hue, sharp, source,

OSD language selection, etc.

2. OUT LOOK

2.1 front panel

1 -/AV1/AV2 (reduce value or AV channel selection)

2 + (increase value)

3 （Move down prompt）

4 （Move up prompt）

5 POWER/MENU

6 Power/LED Indicator

２

User’s Manual TFT-LCD MONITOR

2.2 rear panel

1 VIDEO IN

3 AUDIO IN (R)

5 DC IN (12V3A)

3. Menu Interface

2 AUDIO IN (L)

4 AV2

When you need to adjust the parameters for the LCD monitor, you can short press

“Menu/Power”. The menu will be display on the LCD screen. Then short Press

“Menu/Power” to move the cursor leftwards or rightwards to select the option that user want to modify. Press “UP” or “Down” to move the cursor upwards or downwards.

Then, press “+” or “-“ to increase value or reduce value. After finished the setting, press the “Menu/power” several times to confirm and exit.

PICTURE:

“BRIGHT”: 0~100.

“CONTRAST”: 0~100.

“COLOR”: 0~100.

AUDIO:

“VOLUME”: 0~100.

３

User’s Manual TFT-LCD MONITOR

FUNCTION:

Press the button “UP” or “DOWN” to change the display mode - “NORMAL & DOWN” of the LCD monitor.

“ZOOM”: 16:9、4:3.

SYSTEM:

In this menu interface, users can choose the video format of display. “S-ROLOC”: AUTO、

NTSC、SECAM & PAL.

PRESET:

In this menu interface, users can close the screen automatically in two ways. First, sets for the time of dormancy, the screen will be closed automatically in stipulated time.

“SLEEP”: 0~240 minutes. The value is increased or decreased by ten. The value of “sleep” indicates how long the LCD monitor will be turned off automatically if “OFF-TIME” is not set.

Second, sets for closedown time and time of starting the LCD monitor, the screen closes and reveals at corresponding time point.

“TIME”: --: --, the current time of system.

“OFF-TIME”: --: --, the time of the screen turning off automatically.

“ON-TIME”: --: --, the time of the screen turning on automatically.

When modify “TIME、OFF-TIME、ON-TIME”, press “+” to adjust the value of minute and press "—“ to adjust the value of hour.

４

User’s Manual TFT-LCD MONITOR

4. Appendix

4.1 Specification

Item Description

Display resolution (Pixel) 800 RGB (W) × 480 (H)

Active area (mm)

Screen size (inch)

222.0 (W) × 133.2 (H)

10.2 (Diagonal)

Pixel pitch (mm)

Color configuration

0.2775 (W) × 0.2775 (H)

R. G. B. stripe

Lightness 450cd/m2

Contrast 300:1

Horizontal ≥120°

View angle

Vertical ≥90°

Width to Height Ratio 16:9

A/V Input

Power Input

Dimensions (L x W x H)

3.5mm Stereo (4PIN) Jack

3 RCA Jack (Audio_L , Audio_R , Video)

100~240VAC/DC12V/3A(Adapter supplying)

275x185x38 mm (W/o Stand)

4.2 Fittings Come Along With Monitor

A : 1pc power supply 12VDC 3A

B : 1pc 3.5mm Stereo (4 pole) A/V Cable

C : 1pc 3RCA Plug to Plug A/V Cable

５