Displays2go DBPEDSET3 Set of 3 Portable Pedestals User guide

RESPONSIBLY CREATING BETTER PRODUCTS FOR A BETTER WORLD

w

Table of Contents

Assembly

Instructions

2

DBPED30

A1. Side Panel x2 A2. Side Panel x2 B. Top panel X1 C. Acrylic Top X1

DBPED36

A1. Side Panel x2 A2. Side Panel x2 B. Top panel X1 C. Acrylic Top X1

DBPED42

A1. Side Panel x2 A2. Side Panel x2 B. Top panel X1 C. Acrylic Top X1 D. Shelf X1

NOTE: 2 people are recommeded.

A rubber mallet (not included) is required.

3

1. Assemble pedestal body by inserting tabs on Side Panel (A1) into the slots on Side Panel

(A2). Tap the top of (A2) with a rubber mallet (not included) to secure the side panels.

NOTE: Before assembling, make sure the side with half cut facing outside.

DBPED30

DBPED36

DBPED42

4

2. Assemble the Top Panel (B) with the pedestal body by fitting the top of the pedestal into the cross cutouts at 4 corners.

Peel off the protective film on Acrylic Top (C) and attach to the top of pedestal the same way.

DBPED30 DBPED36 DBPED42

5

3. (For 42” Pedestal ONLY)

Insert the Shelf (D) into the opening on the pedestal body with an angle, and secure it at the middle of the pedestal. The assembly is finished.

6

THANK YOU FOR SPREADING

THE SEEDS OF SUSTAINABILITY

AND HELPING TO PROTECT

OUR PLANET.

DANDELION

Have a question? Get in touch with our Dandelion representatives at:

888-257-6639

7