Location:

Allura ™

Shower System with Hand Shower

4705

Specification Submittal

Feature Highlights

■ Symmons Shower System with LHM style lever handles

■ Symmons Temptrol ® pressure balancing mixing valve with adjustable stop screw to limit handle turn

■ Separate dual outlet lever diverter valve

■ Showerhead, #4-143, 3 mode flood, mist or pulse spray

■ Showerhead mounting arm and flange

■ Wall/hand shower, #H303-V, 3-mode with 5 foot flexible metal hose, in-line vacuum breaker, wall connection and cradle for hand shower mounting

■ 2.5 gpm (9.5 L/min) standard flow rate

■ Polished chrome finish

Model Numbers

 4705 ..................

Shower System with Temptrol ® p/n 4000-BODY and dual outlet diverter p/n 2DIV-BODY

 4705-TRM .........

Trim only, valve and diverter must be ordered separately





4000-BODY........

Symmons Temptrol

4000-X-BODY.... Symmons Temptrol

® pressure balancing mixing valve without trim

® pressure balancing mixing valve without trim.

Valve includes integral service stops to allow water shut-off for service.

 2DIV-BODY....

Symmons dual outlet diverter valve without trim

Options / Modifications

Append appropriate -suffix to model number





-IPS 1/2 inch female IPS connections on Symmons

Temptrol ® mixing valve

-X Symmons Temptrol mixing valve i

®

pressure balancing allow water shut-off for service, p/n 4000-X-BODY.

(Option only applies when ordering model 4705 )

 -CHKS Integral check stops - for use in installations where a positive shut-off device is used downstream of mixing valve

 -REV Reverse coring in valve for back to back installations; hot on right, cold on left,

(available with (-X) integral stops only)

 -2.0

2.0 (7.6 L/min) flow rate restrictor

 -1.5

1.5 (5.7 L/min) flow rate restrictor

 -L/HD Showerhead not included

(Includes showerhead arm and flange only)

 L/HS Hand Shower wand not included

(Includes hose, in-line vacuum breaker, wall connections and flange only)

 -R60 5 foot vinyle hose in place of metal hose

 -R72 6 foot vinyle hose in place of metal hose

 -72 6 foot metal hose in place of standard 5 foot hose

 -QD Quick-disconnect at hand shower wall connection

 -T736 36” slide / grab bar with ADA hand shower in place of standard hand shower unit

Standards / Certifications

ASME A112.18.1/CSA B125.1

Finish Options / Modifications

Append appropriate -suffix to model number

 -STN

-

Satin nickel

Polished chrome (standard finish)

Handle Options / Modifications

Append appropriate -suffix to model number

-LR -LP -LAM

Warranty

■ Limited Lifetime - to the original end purchaser in consumer installations

■ 5 years - for commercial installations

 -LR Lever handle

 -LP Loop style lever handle

 -LAM Lever handle

Dimensions Allura Shower-Hand Shower System,

4705

Male 1/2" IPS thread must be recessed

1/4" (6 mm) from finished wall for proper installation of street ell.

5"

(127 mm)

∅ 7"

(178 mm)

Screw wall cradle into stud or install proper backing.

6-1/2"

(165 mm) finished wall approx.

36-3/4"

(933 mm)

7"

(178 mm) min.

shower discharge

3-1/2"

(89 mm) approx.

40"

(1016 mm) hot and cold inlets adjustment floor line

2-3/8"

(60 mm)

1/2"

(13 mm)

1/2"

(13 mm)

Note: Dimensions subject to

change without notice.

Symmons Industries, Inc. 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621

Copyright © 2016 Symmons Industries, Inc.

■

www.symmons.com

■

[email protected]

■

ZV-685 REV B

■

070816