- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power adapters & inverters
- Fullwat
- FUM - 1205CBP
- User manual
Fullwat FUM - 1205CBP User manual
Add to my manuals
2 Pages
Fullwat FUM - 1205CBP is a compact and portable battery charger designed to quickly and efficiently charge sealed and wet lead-acid batteries with a capacity range of 25Ah to 50Ah.
This versatile charger features a 3-stage charging process (Bulk, Absorption, and Float) that ensures optimal battery health and performance. The Bulk stage provides a constant current charge until the battery voltage reaches a predetermined level, followed by the Absorption stage which maintains a high voltage while gradually reducing the charging current. Once the battery is fully charged, the charger automatically switches to Float mode, where it provides a low-voltage trickle charge to maintain the battery's charge without overcharging.
advertisement
FUM - 1205CBP
3 stage switching mode battery charger
User’s manual
Introduction
This compact portable battery charger gives a fast and complete charge to sealed and wet types of lead acid battery within the capacity range of 25Ah to 50Ah.
Bulk – Absorption – Float Charge
The bulk stage charges the battery at a full constant current (5A) until the battery voltage reaches a slightly higher level, then followed by the absorption stage at which the battery is kept at this high voltage while charging current decreases to a low value.
When the battery is fully charged, it is then switched to the float voltage where it can be maintained indefinitely.
Safety precautions
1. Check the rating label of battery charger for correct AC mains (180~260V 50Hz)
2. It is only for charging of 12V lead acid battery with capacity within 25Ah to 50Ah.
3. Do not charge the battery with any load connected to the battery.
4. Do not plug in the charger before connection to the battery.
5. Make sure the all the connections between the charger output and the battery are secured before plug in to AC mains. Do not move cables during charging as loosen cable connections will cause spark.
6. Double check for correct polarity connection between charger and battery before plug in to the AC mains socket.
7. Always unplug the charger before disconnecting the battery.
8. Do not smoke, strike a match, place metal tools on battery or cause a spark in the vicinity of the battery.
9. When removing battery cables, remove ground cable first.
10. Lead acid battery contains highly corrosive sulphuric acid. Avoid contact with eyes, skin and clothing while working with battery.
11. Working in vicinity of a lead acid battery is dangerous. Batteries generate EXPLOSIVE gases during normal operation.
12. Do not expose charger to rain, snow and wet conditions.
13. Use charger only for lead acid batteries.
14. Do not attempt to repair the battery charger. Incorrect re-assembly may result in a risk of electric shock or fire.
Control and indicators
1. Output terminals for connection to battery.
2. Battery type switch for selection charged battery: sealed or wet type.
3. Charging status LED
When charger is connected to a battery, Green means battery full or float.
When charger is connected to a battery, Red means charging in progress.
When charger is not connected to a battery, Green means charger is powered on.
User’s manual - 1 - FUM - 1205CBP
Instalation procedures
A. Use switch (2) to select the correct type of battery for charging.
B. Connect the positive charger terminal to the positive battery terminal.
C. Connect the negative charger terminal to the negative battery terminal.
D. Double check for correct polarity and all the connecting joints are secured.
E. Turn on the charger and take note of the green LED (3).
F. Unplug the AC mains to the charger before disconnecting battery.
Specifications
AC input voltage 180~260V, 50Hz
AC input current at full load at 230VAC
Output (charge) voltage selections (2 battery type)
Sealed battery - Absorption (13.8~14.1V); Float (13.2~13.5V)
Wet battery - Absorption (14.1~14.4V); Float (13.4~13.7V)
Maximum output charging current (continuous)
Line regulation (180V to 260V) for charging current
FUM - 1205CBP
Yes
0.8A
Yes
Yes
5A
< 0.6%
Ripple and noise (peak to peak)
Efficiency at maximum power
120mV
84%
Protection:
Short circuit protected Yes
Overload protection (automatic reset)
Reverse polarity protection (automatic reset)
Over temperature protection (automatic reset)
OVP - Output Over Voltage Protected (automatic reset)
Battery under voltage protection (automatic reset), when battery voltage <7.5V, charger will stop charging battery.
CE approval and standards
Charge indication (1 led)
Yes
Yes
Yes
Yes
Yes
Anodised aluminum casing
Size in mm (Width x Height x Depth)
Weight in gm
Included accessories (cable, mounting clips)
Recommended battery capacity range
Remark : 110VAC 60Hz input on request
EN60335, EN55014
Red: charging
Green: charged or float
Yes
142 x 75 x 32
380g
Yes
25~50 Ah
All values are based on the standard ambient temperature 25°C and pressure 0.1Mpa.
** SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE **
OR: 7673-2105-0000 Rev. 1.1 12/2006
TR: 1205CBP Rev: 1.0 02/2008
User’s manual - 2 - FUM - 1205CBP
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement