Sprue CO-FA-9B User manual

Add to my manuals
2 Pages

advertisement

Sprue CO-FA-9B User manual | Manualzz
Please read me – as I could save your life.
NOTE: This User Manual is available in
larger text please call 0800 141 2561
INTRODUCTION
The First Alert CO-FA-9B Carbon Monoxide
Poisonous Gas Alarm is one of a new generation
of domestic life safety products from Sprue
Safety Products Limited, which combines the
latest technology and innovative design to
provide an aesthetically pleasing and effective
contribution to your home safety.
Sprue Safety Products Ltd manufactures some
of the most technologically advanced carbon
monoxide detectors in the world.
FEATURES
• An advanced electrochemical sensor
designed to accurately measure low levels
of carbon monoxide (CO) providing an early
warning of toxic CO levels in your home
• Detects carbon monoxide continuously
• Resistant to false alarms caused by normal
household contaminants
• Sounds a loud 85dB alarm (at 1m/3 feet) to
alert you in case of an emergency
• Test/reset button
• Regular self-check to ensure detector is
operating correctly
• Simple to mount, portable, ideal for
travelling
• Certified to the European Standard for
Carbon Monoxide Alarms
EN 50291-1: 2010 and EN 50291-2: 2010
• 7 year warranty
CARBON MONOXIDE AND
HOW IT CAN AFFECT YOU
AND YOUR FAMILY
Carbon monoxide is a poisonous gas that kills
hundreds of people each year and injures many
more. It is often referred to as the silent killer,
it has no odour or taste and cannot be seen.
Like oxygen, CO enters the body through the
lungs during the normal breathing process. It
competes with oxygen by replacing it in the red
blood cells, thereby reducing the flow of oxygen
to the heart, brain and other vital organs. In high
concentrations, CO can kill in minutes.
Many cases of reported carbon monoxide
poisoning indicate that while victims are
aware they are not feeling well, they become
disorientated and unable to save themselves
by either exiting the building or calling for
assistance. Exposure during sleep is particularly
dangerous because the victim usually does not
wake up.
Symptoms of CO poisoning
The following symptoms may be related to CO
poisoning which all household members should
be made aware of:
• Mild Exposure: Slight headache, nausea,
vomiting, fatigue (often described as
‘flu-like’ symptoms)
• Medium Exposure: Severe throbbing
headache, drowsiness, confusion, fast
heart rate
• Extreme Exposure: Unconsciousness,
convulsions, cardiorespiratory failure, death
Your First Alert CO detector monitors the level of
CO as parts per million (ppm) in the atmosphere
surrounding the detector.
35ppm
The maximum allowable concentration for
continuous exposure for healthy adults in
any 8 hour period, as recommended by the
Occupational Safety and Health Administration
(OSHA).
200ppm
Slight headache, fatigue, dizziness, nausea after
2 - 3 hours.
400ppm
Frontal headaches within 1 - 2 hours, life
threatening after 3 hours.
800ppm
Dizziness, nausea and convulsions within 45
minutes. Unconsciousness within 2 hours.
Death within 2 - 3 hours.
Always:
• Buy appliances accepted by a recognised
testing laboratory
• Install appliances according to the
manufacturer’s instructions
• Have appliance installations carried out by
professionals (for gas appliances engineers
should be registered)
• Have your appliances checked regularly by a
qualified service engineer
• Have your chimneys and flues cleaned
professionally every year
• Make regular visual inspections of all fuelburning appliances
• Do not barbecue indoors, or in an attached
garage
• Open windows when a fireplace or oil/solid
fuel cooker is in use
• Only install CO detectors that meet the
requirements of EN 50291-1: 2010 and
EN 50291-2: 2010 in your home
• Be aware of CO poisoning symptoms
Should you suspect CO may be affecting you or
your family, open the doors and windows of your
property to ventilate, turn off your appliances
and evacuate the premises. At this time the
authorities should be contacted to locate the
source of the carbon monoxide before reentering the building. Medical attention should
be sought for anyone suffering the effects of CO
poisoning (headache, nausea).
EDUCATE YOURSELF AND YOUR FAMILY
ON THE SOURCES AND SYMPTOMS OF
CO POISONING AND HOW TO USE YOUR
CARBON MONOXIDE DETECTOR
Common sources of CO
• Oil and gas boilers
• Portable generators
• Oil or solid fuel cookers
• Gas or paraffin heaters
• Barbecues
• Clogged chimneys
• Gas, wood, coal or coke fireplaces
• Cigarette smoke
• Gas appliances
• Any fossil fuel burning appliance
This CO alarm is suitable for use in domestic
premises (caravan holiday homes), caravans
and motor caravans.
WARNING: This First Alert carbon monoxide
detector is not a combustible gas detector,
nor a smoke detector. Please install the proper
detectors to detect combustible gases, or
smoke.
This CO detector should not be seen as a
substitute for the proper installation, use,
and maintenance of fuel-burning appliances
(including appropriate ventilation and exhaust
systems), nor the sweeping of chimneys.
WARNING: : Variables relating to your fuel
burning appliances can change at any point
eg. the flue or chimney could suddenly
become blocked or damaged, appliances may
stop running correctly or circumstances in
neighbouring properties may change resulting in
the presence of carbon monoxide. For this and
other reasons do not use this carbon monoxide
detector on an intermittent basis, or as a
portable detector for trying to trace one source
of the spillage of combustion products from fuel
burning appliances or from chimney.
WHERE TO INSTALL YOUR
DETECTOR
• Locate apparatus in a room where the
occupant(s) spend most time
• If the domestic premises is a bedsit (a
single room serving as both sitting and
bedroom) then the apparatus should
be put as far from the cooking appliances
as possible but near to where the person
sleeps
• If the appliance is in a room not normally
used (for example a boiler room), the
apparatus should be put just outside the
room so that the alarm may be heard more easily.
Where in the room should I place the detector?
Apparatus located in the same room as a fuelburning appliance:
A For both wall and ceiling mounted
apparatus the following applies:
• The apparatus should be at a horizontal
distance of between 1m and 3m from the
potential source
• If there is a partition in a room, the
apparatus should be located on the same
side of the partition as the potential source
• Carbon Monoxide detectors in rooms
with sloped ceilings should be located at
the high side of the room
BIn addition to the previous points the
following must be observed:
If the apparatus is located on a wall:
• it should be located close to the ceiling;
• it should be located at a height greater
than the height of any door or window;
• it should be at least 150mm from the
ceiling.
If the apparatus is located on the ceiling:
• it should be at least 300mm from any wall and any ceiling obstruction e.g. light
fittings.
Apparatus located in sleeping rooms and in
rooms remote from a fuel burning appliance:
• Apparatus located in sleeping rooms
or located in rooms remote from the
fuel-burning appliance should be located
relatively close to the breathing zone of
the occupants
Where not to put the detector
The following advice is applicable to all intended
applications, there are special instructions at
the end of this section relating to positioning
in caravan holiday homes, caravans and motor
caravans.
WARNING: This detector will only indicate the
presence of carbon monoxide gas at the sensor.
Carbon monoxide gas may be present in other
areas.
In which room should the detector be
installed?
Ideally, an apparatus should be installed in
every room containing a fuel burning appliance.
Additional apparatus may be installed to ensure
that adequate warning is given for occupants in
other rooms, by locating apparatus in:
• Remote rooms in which the occupant(s)
spend considerable time whilst awake
and from which they may not be able hear
an alarm from apparatus in another part of the premises, and
• Every sleeping room
However, if there is a fuel burning appliance
in more than one room and the number of
apparatus is limited, the following points should
be considered when deciding where best to put
the apparatus:
The apparatus should not be installed:
• In an enclosed space (for example in a
cupboard or behind a curtain)
• Where it can be obstructed (for example
by furniture)
• Directly above a sink
alarm in the same room as any combustion
appliance(s), located in accordance with
previous advice in this section. If the caravan
has a single living space which incorporates
the sleeping accommodation, it can be
considered to be equivalent to a bedsit, and a
single alarm is sufficient. However, any sleeping
accommodation which is in a separate room
from the combustion appliance(s) should also
contain an alarm, located in accordance with
previous advice in this section.
HOW TO INSTALL
YOUR DETECTOR
NOTE: This apparatus should
be installed by a competent
person who feels able to
install it according to the
instructions.
Firstly write the installation
date on your detector in
the area provided. We
recommend
that
your
detector is installed on the
wall.
To mount on a wall or
ceiling:
Please ensure that you use
the screws provided, as they
were chosen specifically for
use with this product. Use
template below for guidance
on marking hole positions.
Drill holes into the wall. Insert
the plastic wall plugs. Screw
in the screws. Ensure screws
are protruding from the wall
by 3mm to allow detector to
slot onto screws.
To place on a shelf:
The base of the detector has
been designed to allow it to
stand freely on a shelf.
WARNING: When placing
on a shelf, please follow to
the recommendations for
positioning.
If you have followed all of the above steps
correctly, your unit will begin monitoring for
CO in around 3 minutes. When the 3 minute
warm-up period is complete, the Power LED
will flash green once per minute to indicate
that the alarm is receiving power from the
batteries and is fully operational (if your detector
chirps or enters alarm following the 3 minute
warm-up period and your product is still within
warranty, then please contact technical support
for advice).
Caravans
Caravans may have additional risks of carbon
monoxide ingress through air vents due to the
nearby presence of other vehicles, engines,
generators or barbecues, however this does
not change the basic guidance on location of
the alarm. Caravans should be fitted with an
WARNING: Prolonged exposure to the sounder
in close proximity to your ears may damage your
hearing.
Under normal operating conditions, the
batteries should last for at least 12 months.
The detector will not protect against the risk of
carbon monoxide poisoning when the batteries
have drained.
WARNING: Prolonged exposure to extreme
high or low temperatures may reduce the life of
the batteries.
OPERATING FEATURES
• In an area where the temperature may
drop below -10°C or exceed 40°C
• Less than 1m/3 feet from any appliance
E Test the sounder, batteries and circuitry
by pressing and holding the Test/Reset
button for 1 second. The sounder should
sound as soon as the button is pressed,
and the Alarm LED will illuminate red for a short time indicating that the sounder is
working and the batteries are providing power
to the unit. This test for the sounder, batteries
and circuitry should be performed weekly.
Your First Alert CO detector offers many features
which set it apart from other CO detectors on
the market today.
• Next to an air vent or other similar
ventilation openings
• Within 1m (3 feet) of mobile phones
DYour advanced First Alert CO detector
requires a short ‘warm-up’ period before it is fully operational.
Press ridged
area in and slide
door out to
reveal battery
compartment
• Next to a door or window
• In a damp or humid location (for example
in a bathroom)
Products Ltd may have a detrimental
effect on the detector’s operation.
Replace the battery cover and return the
detector to its original position.
• Not mounting the apparatus directly above a
source of heat or steam; and
• Mounting the apparatus at a distance of
1 – 3 m from the nearest edge of the potential
source.
• Next to an extractor fan
• Where dirt and dust may block the sensor
It is not always possible to find an optimum
location for an apparatus, for example, a
small caravan may not have suitable vertical
surfaces available. Nevertheless, when fitting
an apparatus in such situations, the two most
important considerations when selecting an
appropriate location are:
90mm
CARBON MONOXIDE ALARM
• Locate the apparatus in a room containing a flueless or open-flued appliance, and
Drill hole spacing
CO-FA-9B USER MANUAL
Do not:
• IGNORE ANY WARNING FROM YOUR CO
DETECTOR!
• Burn charcoal inside your home, caravan,
tent or cabin
• Install, convert or service fuel-burning
appliances without proper knowledge, skill
and expertise
• Use a gas cooker for heating a room
• Operate unvented gas burning appliances
using paraffin or natural gas in closed rooms
• Operate petrol-powered engines indoors or
in confined areas
• Ignore a safety device when it shuts an
appliance off
Test/Reset button feature
BATTERY INSTALLATION /
REPLACEMENT
A If the detector is already wall or ceiling
mounted then unhook it from the
mounting screws.
BRemove the battery cover located on the
back of the detector.
CReplace the batteries with 2 x approved
1.5 volt AA size alkaline batteries,
making sure the batteries are the correct
way round. Use of batteries other than
those recommended by Sprue Safety
This button will:
• Test the sounder, batteries and circuitry
• Allow you to test the sensor by
introducing a source of CO into the
detector (see ‘Testing The Sensor’ below)
• Silence the loud 85dB sounder during an
alarm (only possible when current CO
level is less than 50ppm)
Testing the sounder, batteries and circuitry
Test the sounder, batteries and circuitry by
pressing and holding the Test/Reset button for 1
second to confirm that the detector is operating
• Perform the Sensor Test annually
properly. The sounder should sound as soon as
the button is pressed, and the Alarm LED will
illuminate red, indicating that the sounder is
working and the batteries are providing power to
the unit. This test for the sounder, batteries and
circuitry should be performed weekly.
• Keep the detector free of dust by gently
vacuuming the case with a soft brush
attachment when required.
To prevent the possibility of contaminating the
sensor in your detector and thus affecting its
reliability:
Testing the sensor
NOTE: We suggest the use of an incense stick
or cigarette as the way in which these products­
burn produces a readable localised amount
of carbon monoxide. Alternative sources of
smoke, for example an extinguished candle
or match, will not contain sufficient levels of
carbon monoxide to obtain a response from the
detector during this test. Please note your CO
detector will not detect smoke.
If testing the sensor for the first time after
installation, or replacing the batteries, make
sure that the alarm has completed the initial 3
minute warm up period and the power LED is
flashing green once every minute.
CAUTION: Sensor testing should only be
performed by a responsible adult.
This test should be performed annually.
NOTE: Aerosol CO may
to avoid having to burn
cigarettes. However we
incense sticks are used as
readily available.
be used in order
incense sticks or
recommend that
they are cheap and
• Read all steps thoroughly before attempting to test your the sensor
Step 1 If the detector is wall or ceiling mounted
unhook the detector from the screws.
Step 2 Cover the sounder vents with one hand.
Press and hold the Test/Reset button down
with your thumb/finger until the Power LED
illuminates green and the sounder sounds for
a second time (this should happen after around
5 seconds). Release the Test/Reset button.
Upon releasing the Test/Reset button the Power
LED will flash green once every second. This
indicates that the sampling rate of the detector
has increased and can be tested using a known
source of CO.
Test/Reset
Button
Step 3 Light an incense stick or cigarette using
a match or lighter. If using an incense stick be
sure to blow out the flame so that the incense
stick is smouldering. Extinguish the lighter,
or put out the match and place it into a dish of
water.
Step 4 Turn the detector on its side so that the
vents on the right hand side of the detector are
pointing downwards (see diagram above). Hold
the burning incense stick or cigarette around
15cm (6 inches) below the detector, so that
the smoke enters the vents on the side of the
detector. An increase in the localised carbon
monoxide level within the sensor to more than
50ppm will cause the sounder to sound for one
cycle of four loud beeps and the Power LED to
illuminate green for a short time. This is the end
of the test. The Power LED will no longer flash
green every second but will revert to flashing
once every minute as the detector will go back
to normal operating mode (It may take up to
two minutes of exposure to the smoke for the
localised level of carbon monoxide within the
sensor to reach over 50ppm). Now move the
source of CO away from the detector as the test
is finished.
• Never use cleaning solutions on your
detector. Simply wipe with a slightly
damp cloth
• Do not paint the detector
15cm
(6”)
• Do not spray aerosols on or near the
detector
Step 5 After step 4, put out the incense stick
or cigarette by placing it into a dish of water.
Ensure that all flames have been extinguished.
NOTE: If the localised carbon monoxide level
within the sensor does not reach 50ppm during
the test, the sensor test will stop automatically
after 3 minutes.
• If installing in a caravan there maybe other substances present, that may not normally be found in the home, that could effect the reliability of the CO alarm. Avoid using the following in close proximity to the alarm; oils, cleaning fluids, polishes, paints and greases.
• Move the detector to a safe location and
store in a plastic bag before painting, wall papering, or performing any other activities using substances that emit strong fumes.
Remember to remove it from the bag and return the detector to its original location when these activities are finished
UNDERSTANDING THE
PRODUCT’S INDICATORS
Failure of any test should be reported to the First
Alert technical support.
The higher the concentration of carbon
monoxide detected by the detector, the
quicker it will respond. When sufficient carbon
monoxide is detected a loud audible signal (85
dB at 1m/3 feet) will be emitted and the Alarm
LED will flash red once every second.
Do not attempt to repair your CO detector.
Do not remove any screws or open the main
casing of your detector. Any attempt to do so
may cause malfunction and will invalidate the
warranty.
The Alarm will sound:
• Between 60 and 90 minutes when exposed to 50ppm of CO
• Between 10 and 40 minutes when exposed to 100ppm of CO
• Within 3 minutes when exposed to 300ppm or more
Fault / low battery signal:
The unit continuously checks the settings of
its sensor and circuitry. If any of these settings
are found to be incorrect or if the batteries
become low then the detector will emit a single
audible chirp once per minute for up to 30 days.
IMPORTANT: This does NOT mean that the
detector has detected carbon monoxide.
Replace batteries immediately. If the product
continues to chirp despite having new batteries
and the product is still within warranty then
contact technical support for advice. If the
product is no longer in warranty replace it
immediately!
First Alert Technical Support Line
9.00am–5.00pm, Monday–Friday.
Telephone: 0800 141 2561
UK Textphone Users Telephone:
18001 0800 141 2561
EIRE dial: 1-800 523171
e-mail: [email protected]
MAINTAINING / TESTING
YOUR DETECTOR
Maintenance
Your detector will alert you to potentially
hazardous CO concentrations in your home
when maintained properly. To maintain your First
Alert detector in proper working order, and to
ensure that the sensor will last for the lifetime of
the product, it is recommended that you:
• Test the sounder, batteries and circuitry of your detector once per week by pressing and holding the Test/Reset
button for 1 second
WHAT TO DO IN THE EVENT
OF AN ALARM
USEFUL NUMBERS
National Gas Emergency Service
0800 111 999 (24 Hours)
Gas Safe register
0800 408 5500
Solid Fuel Association
Advisory service for domestic and solid fuel
appliances
0845 601 4406
WARNING: DO NOT ATTEMPT TO OPEN - DO
NOT BURN
OFTEC
Trade association for Oil Fired Appliance
engineers
0845 658 5080
7 YEAR WARRANTY
Sprue Safety Products Ltd warrants to the
original purchaser that its enclosed sealed
carbon monoxide detector be free from defects
in materials and workmanship under normal
residential use and service for a period of 7
(seven) years from the date of purchase.
NACS
National Association of Chimney Sweeps
01785 811732
IPHE
Institute of Plumbing and Heating Engineers
01708 472791
TECHNICAL INFORMATION
Detector Specifications:
Model CO-FA-9B
Sensor Type:
Electrochemical
wr Life:
7 Years
Alarm Sound Level:
85dB at 1m/3 feet
Recommended Batteries:
Size AA Alkaline - Duracell LR6,
Energizer LR6, Gold Peak 15A
Battery Life:
Exceeds 1 year under normal operating conditions, replaceable
Please carefully review this owner’s manual to
ensure that you know what actions to take in the
event of an alarm.
Operating Humidity Range:
30 - 90% RH
Weight (inc. batteries):
125 grams (4.4oz)
• Keep calm and open the doors and
windows to ventilate the property
Certified to:
EN 50291-1: 2010 and EN 50291-2: 2010
• Stop using all fuel burning appliances and ensure, if possible, that they are turned off
This First Alert carbon monoxide
detector is designed to continuously
monitor for CO. Its response times
meet the requirements of the
European standard EN 50291-1: 2010
and EN 50291-2: 2010.
• Ring your gas or other fuel supplier on
their emergency number; keep the
number in a prominent place
The alarm will sound:
Write your fuel supplier’s emergency number
here (see opposite for more useful numbers):
• Between 60 and 90 minutes when exposed to 50ppm of CO
______________________________________
• Between 10 and 40 minutes when exposed to 100ppm of CO
• Do not re-enter the property until the alarm
has stopped. When exposed to fresh air
it can take up to 10 minutes for the sensor
to clear and the alarm to stop depending
on the level of carbon monoxide detected
• Get medical help immediately for anyone
suffering the effects of carbon monoxide
poisoning (headache, nausea), and
advise that carbon monoxide poisoning
is suspected
• Do not use the appliances again until they
have been checked by an expert. In the
case of gas appliances the engineer must
be registered
Provided it is returned with postage prepaid
and proof of purchase, Sprue Safety Products
Ltd hereby warrants that during the 7 (seven)
year period commencing from the date of
purchase Sprue Safety Products Ltd, at its
discretion, agrees to replace the unit free of
charge. The warranty on any replacement First
Alert CO-FA-9B Carbon Monoxide Poisonous
Gas Alarm will last for the remainder of the
period of the original warranty in respect of
the detector originally purchased – that is from
the date of original purchase and not from the
date of receipt of the replacement product.
Sprue Safety Products Ltd reserves the right
to offer an alternative product similar to that
being replaced if the original model is no longer
available or in stock. This warranty applies to the
original retail purchaser from the date of original
retail purchase and is not transferable. Proof of
purchase is required.
Warranty disclaimers
Temperature Range:
-10ºC (14ºF) to 40ºC (104ºF)
What to do during an alarm
• Evacuate the property leaving the doors
and windows open
RETURNS
Should you encounter a problem with your
alarm, we recommend that you contact the First
Alert Technical Support Line in the first instance
for advice on 0800 141 2561 (9.00am–5.00pm,
Monday–Friday), UK Text phone users dial
18001 0800 141 2561 or callers from EIRE dial
1-800 523171 as we may be able to remedy
the problem quickly over the phone (this is to
prevent unnecessary returns that take a longer
time to process). Alternatively e-mail:
The batteries should be removed before
disposal of the detector. Both the batteries and
the detector should be disposed of in line with
current regulations.
HETAS
Trade association for solid fuel engineers
0845 223 3033
WARNING: A loud alarm is a warning that
unusually high and potentially lethal levels of
carbon monoxide are present. Never ignore
this alarm, further exposure can be fatal.
Immediately check residents for symptoms of
carbon monoxide poisoning, and contact the
proper authorities to resolve all CO problems.
NEVER IGNORE ANY ALARM.
DISPOSAL
Waste electrical products should not be
disposed of with regular household waste.
Please recycle where facilities
exist. Check with your local
authority, retailer or the First
Alert Technical Support Line for
recycling/disposal
advice
as
regional variations apply.
• Within 3 minutes when exposed to CO levels of 300ppm or more
WARNING: APPARATUS CONFORMING TO
THIS STANDARD MAY NOT PROTECT PEOPLE
WHO ARE AT SPECIAL RISK FROM CARBON
MONOXIDE EXPOSURE BY REASON OF AGE,
PREGNANCY OR MEDICAL CONDITION. IF IN
DOUBT, CONSULT YOUR DOCTOR.
This warranty does not cover damage resulting
from accident, misuse, disassembly, abuse
or lack of reasonable care of the product, or
applications not in accordance with the user
manual. It does not cover events and conditions
outside of Sprue Safety Products Ltd’s control,
such as Acts of God (fire, severe weather etc). It
does not apply to retail stores, service centres
or any distributors or agents. Sprue Safety
Products Ltd will not recognise any changes
to this warranty by third parties. Sprue Safety
Products Ltd shall not be liable for any incidental
or consequential damages caused by the
breach of any expressed or implied warranty.
Except to the extent prohibited by applicable
law, any implied warranty of merchantability
or fitness for a particular purpose is limited in
duration to 7 years.
[email protected]
If there is a fault that we are unable to resolve
then our technical support team member will
provide you with a returns authority number so
that your product can be returned for testing.
To return your First Alert CO-FA-9B under
warranty, send it suitably packed and with the
batteries disconnected with postage prepaid;
a note indicating the returns authority number
and describing the reason for return, with proof
of purchase to:
Sprue Safety Products Ltd.
First Alert Customer Services
6 Davy Way, Carter Court
Waterwells Business Park
Gloucester GL2 2DE
United Kingdom
PRODUCT RANGE
Sprue Safety Products Ltd manufactures
an extensive range of home safety products
including smoke alarms, carbon monoxide
detectors, fire extinguishers and remote
sounding devices. For more details visit
www.sprue.com
Technical Support Line
0800 141 2561
UK Textphone users dial
18001 0800 141 2561
EIRE dial
1-800 523171
Email
[email protected]
Web
www.sprue.com
This warranty does not affect your statutory
rights. Except for death or personal injury, Sprue
Safety Products Ltd shall not be liable for any
loss of use, damage, cost or expense relating to
this product or for any indirect, or consequential
loss, damages or costs incurred by you or any
other user of this product.
EN 50291-1: 2010
EN 50291-2: 2010
KM 551504
The warranty does not cover the batteries which
are considered user-replaceable parts.
A CARBON MONOXIDE DETECTOR IS NOT
A SUBSTITUTE FOR A SMOKE ALARM OR A
COMBUSTIBLE GAS DETECTOR.
REPLACE UNIT
OPERATION.
AFTER
7
YEARS
OF
A Sprue Safety Products Brand
GN1692/R2
Sprue Safety Products Ltd.
Vanguard Centre
Sir William Lyons Road
Coventry CV4 7EZ UK

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement