advertisement
Software User Manual
Version 1.5
R02 EN150608
End User License Agreement (EULA)
Do not use this product until the following license agreement is understood and accepted.
By using this product, or allowing anyone else to do so, you are accepting this agreement.
Electro Suite (henceforth ‘the Product’) is licensed to you as the end user. Please read this Agreement carefully. You cannot transfer ownership of these Sounds and Software they contain. You cannot re-sell or copy the Product.
LICENSE AND PROTECTION
1. License Grant
UVI grants to you, subject to the following terms and conditions, a non-exclusive, non-transferable right to use each authorized copy of the Product.
The product is the property of UVI and is licensed to you only for use as part of a musical performance, live or recorded. This license expressly forbids resale or other distribution of the sounds and software included in the Product or their derivatives, either as they exist on disc, reformatted for use in another digital sampler, or mixed, combined, filtered, resynthesized or otherwise edited, for use as sounds, multi-sounds, samples, multi-samples, wavetables, programs or patches in a sampler, microchip or any hardware or software sample playback device.
You cannot sell the Product content or give it away for use by others in their sampling or sample playback devices. In the event UVI terminates this agreement due to your breach, you agree to return the original and all other copies of the software and documentation to UVI.
UVI reserves all rights not expressly granted to herein.
2. Protection of Software
You agree to take all reasonable steps to protect the product and any accompanying documentation from unauthorized copying or use. You agree not to modify the product to circumvent any method or means adopted or implemented by UVI to protect against or discourage the unlicensed use of copying of the Product.
3. Ownership
As between you and UVI, ownership of, and title to, the enclosed digitally recorded sounds (including any copies) are held by UVI.
Copies are provided to you only to enable you to exercise your rights under the license.
4. Term
This agreement is effective from the date you open this package, and will remain in full force until termination. This agreement will terminate if you break any of the terms or conditions of this agreement. Upon termination you agree to destroy and return to UVI all copies of this product and accompanying documentation.
5. Restrictions
Except as expressly authorized in this agreement, you may not rent, sell, lease, sub-license, distribute, transfer, copy, reproduce, display, modify or time share the enclosed product or documentation.
6. Hardware
The accompanying USB flash media is only guaranteed in it’s original state, as an installation medium for the Product. Any variance from this use including but not limited to deleting, altering or adding data, reformatting the media or any physical alteration of the device will void its warranty. If the media is found to have a physical or manufacturing defect please contact our support department (http:// www.uvi.net/contact-support).
©2015 UVI. All rights reserved.
All trademarks are the property of their respective owners.
2
Table of Contents
Introduction
4
System Requirements
5
Installation
Step 1 - Register Your Serial Number
6
Step 2 - Activate Your License
7
Step 3 - Install Your Instrument
8
Step 4 - Load Your Instrument
9
UES CarminePoly
User Interface
10
Preset List
11
UES DirtyMono
Main
12
FX
13
Phraser
14
Preset List
15
UES DrumShaper
Main
16
Bass Drum
17
Snare
18
Clap
19
HiHat
20
Pattern
21
UES MissionControl
22
UES SweepMachine
23
Construction Kits and Samples
24
UVI Workstation: Tips and Tricks
27
Links
28
Credits and Thanks
29
3
Introduction
Electro Suite
Being more than fans of electro, we harnessed the storm and set out to develop a unique collection of powerful instruments, combined with a massive sound library specifically suited to dance.
Simple to use yet rich with sound design potential, Electro Suite includes an advanced drum designer, two synths (a bass/mono synth and a lead/poly), a sweep machine and a looper to help get the flow started.
The instruments of UVI Electro Suite come packed with nearly 4.5 GB of sample material carefully recorded from over 2 decades of choice equipment at 24 bit / 96 kHz and then professionally mastered. Giving you a huge palette of sounds ready to go straight away.
Whether you’re looking for solid preset kits to lay down or versatile sound design tools built to advance your style, Electro Suite is a powerful addition to your arsenal.
UES DrumShaper UES DirtyMONO UES CarminePoly UES SweepMachine UES MissionCotrol
A unique and robust drum designer, DrumShaper gives you absolute control over the core percussion sounds of dance; bass drum, snare, claps and hi-hats. Start with a wide range of samples and refine and shape them with advanced analog modeled filters and controls
(an entire page for each sound) intuitively arranged to provide maximum efficiency and flexibility.
The rubber hits the road with this wild and gritty monophonic synth. 4 sound generators including VCO1, dedicated to pure analog rendered wavetables, VCO2, a digital multi-sampled oscillator, an analog modeled sub oscillator, and an analog sampled noise oscillator. Each generator can be mixed and routed to an enormous sounding low pass filter. Other features include analog modeled LFOs, envelopes, FX and a fantastic phrase sequencer.
A polyphonic synth with attitude, CarminePoly features two hybrid VCOs with both stereo, unison and raw waveforms using a deep sampling process for CPU efficiency. These VOCs can be mixed, panned, transposed and routed through a fully tweakable analog modeled filter. Finally, 4 FX are available to shape the sound further;
Drive - for harmonics and grit,
Delay and Phaser, and the all new Sparkle reverb from UVI.
SweepMachine is a straightforward yet versatile noise and sweep designer. Those looking for typical sweeps can make them in moments while those favoring deeper sound design will find complex, evolving noise beds and a near endless variety of combinations waiting to be explored through an intuitive and easy-to-use interface.
Choose from a huge list of presets and get the track started with this amazing sounding looper. Independent control of 6 sections allows complete control of mix volume, filtering and pan.
4
System Requirements
Compatibility
Audio Units, VST, MAS, AAX, RTAS or standalone
UVI Workstation 2.5.12 or higher
Minimum System Requirements
Intel CPU
4 GB of RAM (8 GB+ recommended)
3.3 GB of disk space
Mac OS X 10.7 or higher
iLok account (free, dongle not required)
Compatibility
VST, AAX, RTAS or standalone
UVI Workstation 2.5.12 or higher
Minimum System Requirements
Core Duo or faster
4 GB of RAM (8 GB+ recommended)
3.3 GB of disk space
Windows 7 or higher
iLok account (free, dongle not required)
Authorize the Way You Want
Your license allows 3 concurrent authorizations on any combination of computers and iLok dongles.
License management is a simple drag-and-drop process done through iLok License Manager.
Visi t ilok.com/ to download iLok License Manager and create your free account.
5
Step
1
Register Your Serial Number
1 2 3 4
You must have an account on uvi.net/ and ilok.com/ prior to registration
If you purchased a physical version of this product, your serial number is located on the inside of the box
If you purchased an electronic version of this product, your serial number will be included in a confirmation email
You can see a list of the products you’ve registered and their serial numbers anytime at uvi.net/my-products
1. Login to your account on uvi.net/
2. Navigate to the ‘Product Registration’ page
3. Enter your details and click ‘Register’
Upon completion a new license will be deposited in your iLok account
6
Step
2
Activate Your License
iLok License Manager is required for activation, download the newest version at ilok.com/ilm.html
Your license allows up to 3 concurrent activations on any combination of iLok dongles and computers
Activations can be moved between devices at anytime
1 2 3 4
1. Launch iLok License Manager
2. Login to your account
3. Click the ‘Available’ tab
4. Drag the license to your computer or an iLok dongle
5. Click ‘Ok’ to confirm the activation
The process is complete, your device is now authorized
»
To see how many authorizations you have left simply select the license and click ‘Show Details’
»
To deactivate your license, right-click it and select ‘Deactivate’ — doing so will return your license to the ‘Available’ tab
7
Step
3
Install Your Instrument
UVI Instruments can be stored anywhere on your system
Storing your instruments on a fast drive will improve performance
Your instruments can be downloaded at any time from uvi.net/my-products
1. Create a folder on your computer and place your UVI Instruments in it
Once this is done we need to tell UVI Workstation where to find your instruments.
We do this by creating a watch folder, follow the steps below to create your own:
2. Open UVI Workstation
3. Click the Settings page
4. Click the ‘Sound Banks’ tab
5. Click the ‘...’ button and select the folder where you’ve placed your instruments
6. Restart UVI Workstation and open the Browser
Your instruments will be available under the ‘Soundbanks’ tab
1 2 3 4
8
Step
4
Load Your Instrument
UVI Workstation is required to run UVI Instruments
The newest version of UVI Workstation can be downloaded free at uvi.net/downloads
UVI Workstation can be run as a standalone program or as a virtual instrument from within your DAW of choice
1 2 3 4
1. Open UVI Workstation
2. Click the Browser icon
3. Open the Sound Banks tab
4. Select a product, in this example we’ll choose Vector Pro, then select an instrument and patch
Double-click the patch to load it
5. The UI appears and you’re ready to jam!
9
UES CarminePoly - User Interface
Master
1
Oscillators
2
Amp
3
LFO
5
FX Panel
6
4
Filter
UES CarminePoly is an exclusive polyphonic synth, featuring two hybrid VCOs containing stereo, unison and raw waveforms. Using sampling methods rather than modeling, UES CarminePoly uses less CPU and offers quality sound. These VCOs can be mixed, panned, transposed. Also included is a juicy analog-modeled filter with full controls like cutoff, Q and drive, and four excellent master FXs: drive, delay and phaser, and sparkle reverb.
1 Master
» Preset Menu
» Volume
2 Oscillators
» Power On/Off
Per-osc power switch
» Wave Menu
Select wave type
» Coarse
Tune in semitones (+/-24)
» Volume
Set osc volume
» Pan
Set osc pan
» Octave
Set osc pitch/octave (+/-1)
» Fine
Set osc fine pitch
3 Amp
» Velocity
Amount of velocity applied to amp envelope
» ADSR
Typical attack, decay, sustain, release envelope
4 Filter
» Type
LPF, BPF, & HPF
» Cutoff
Amount of filter applied
» Q
Resonance of the filter
» Drive
Change the filter’s harmonics
» Offset
Add a frequency offset in semitones between VCO1 and VCO2 filters
» Modwheel
On/Off connect between the modwheel and cutoff
» ADSR
Typical attack, decay, sustain, release envelope
» Depth
Amount of the ADSR applied to the filter
5 LFO
» Wave Menu
» Sync
Sync LFO to host tempo
» Rate
Speed of the LFO
» Cutoff
LFO applied to filter
» Pitch
LFO applied to pitch
» Modwheel
Control LFO depth
6 FX Panel
» Glide
Portamento time
» Drive
» Phaser
» Delay
» Sparkle
10
UES CarminePoly - Presets
Default Preset
Modwheel Filter Pluck
Very Big Saw
Polykeys Filter Wheel
Analog Bells
Dark Pad Modwheel
Funk Analog Clav
Sine Walker Organ
Soft Carmine Piano
Space Pad
Electro Perc Organ
Garage Bell
FX Omnia
Eve and Jelly
My Tangerine
Auto Gate Fifth
Poly Carlos
HPF Sync Gate
Uni Jarre Eve
BPF Filter Wheel
11
UES DirtyMONO - Synth
Master
VCO2 - Digital
1
3
VCO1 - Analog
2
4
Sub & Noise
Filter
5
LFO
7
6
Envelope
8
Pitch
9
Page
UES DirtyMONO is a monophonic synth with a smart phraser. it contains 4 sounds generators: VCO1 - a pure analog rendered wavetable, VCO2 - a deeply multi-sampled oscillator, a thick analog sub oscillator, and an analog sampled noise plus standard shaping tools such as LFOs, envelope, and FX.
1 Master
» Preset Menu
» Volume
2 VCO1 - Analog
» On/Off
» Preset Menu
Select waveform
» Volume
» Octave
-1 to +1 octave
3 VCO2 - Digital
» On/Off
» Volume
» HPF
High-pass filter cutoff frequency
» Tune
Adjust pitch [+/-24 semi] semitones
4 Sub & Noise Osc
» On/Off
Toggle the osc on/off
» Volume
Volume amount
5 Filter
» Cutoff / Res
LPF, cutoff and resonance
» Drive
Adjust the filters drive amt
» Modwheel
Set the cutoff frequency
6 Envelope
» Attack
Typical ADSR envelope settings
» Vel
Velocity applied to sound
» Depth
Depth of ADSR action
7 LFO
» Combo List
Waveform of LFO
» Sync
Sync LFO to host tempo
» Rate
Speed of the LFO
» Cutoff
LFO applied to filter
» Pitch
LFO applied to pitch
» Modwheel
Control LFO depth
8 Pitch
» Mono Mode
Select portamento mode
» Glide
Portamento time
» Bend AMT
Pitch bend limit in semitones
9 Page
Select the visible UI page
12
UES DirtyMONO - FX
Bit Crusher
1
2
Phaser
3
Delay
Sparkle
4
1 Bit Crusher
» Bits
0 to 24 bit
» Frequency
0 to 48000 Hz
» Drive
Add drive to the output
2 Phaser
» Sync
Sync phaser to host tempo
» Speed
Adjust phaser spreed
» Depth
Adjust the amount of the effect
» Feedback
Adjust the amount of the
re-injected signal
3 Delay
» Mix
Adjust dry/wet setting
» Time
Adjust delay time
» Feedback
Adjust the amount of the re-injected signal
» Cutoff
Adjust the filter cutoff of the delayed signal
» Spread
Adjust stereo spread of the delayed signal
4 Sparkle (Sparkverb)
» Mix
Adjust dry/wet setting
» Size
Adjust the room size
» Decay
Adjust the decay of the reverb
» Lo Decay
Adjust the level under the cross-over frequency
» X-Over1
Adjust the crossover frequency of the low decay
» Hi Decay
Adjust the level beyond the cross-over frequency
» X-Over2
Adjust the crossover frequency of the high decay
13
UES DityMONO - Phraser
Resolution
1
Groove
2
Gate
3
Column
6
Pitch
7
Link
8
5
Step
4
Record / Add
Create and play step sequences using UES DirtyMONO phraser. Using your MIDI keyboard, press record and play the keys. The number of steps will be adjusted to the number of notes played (you can change it at any time). You can also create and combine your phrase step by step.
1 Resolution
2 Groove
3
Select the phraser’s speed
Adjust the amount of extra groove
Gate
Adjust the note length
4 Record / Add
» Record
Enable/disable record
» Add
Add a blank step
5 Step
Select the number of steps played
6 Column
8
Adjust the velocity of a step
7 Pitch
Adjust the pitch of a step (in semitones)
Link
Link a step to the previous one
14
UES DirtyMONO - Presets
Init
PHR Dirty
PHR Modwheel me
PHR Dreaming
PHR Peach Di Mode
PHR The Rider
PHR One Finger Bass
PHR Disco Kitsch
PHR Pop Corning
PHR Mayhem of Loops
Master Lead
Wheel my Bass
Crushing Drone
Almost Funky Bass
Reversible Bass
Very Noisy Lead
Solo in Space
Ba Lead Balow
FX Space Radio
Ultra Portamento
FX PHR Coach On
15
UES DrumShaper - Overview
Master
1
1 Master
The master section contains buttons to change the current instrument page along with volume, solo and mute toggles for each instrument.
» BD / SD / CP / HH / PATTERN
Changes the current instrument page
» Volume
Changes the volume for the instrument
» Mute / Solo
Mute or Solo the instrument
MIDI Mapping
» Bass Drum
» Snare Drum
» Clap
B0 and C1
D1 and E1
C#1 and D#1
» Closed Hat F#1 and G#1
» Open Hat A#1
» Play/Stop C2
16
UES DrumShaper - Bass Drum
Attack
1
Body
2
Tone
3
Each instrument in UES DrumShaper has a dedicated edit page. The Bass Drum page deals specifically with the bass (kick) drum. The bass drum sound is divided into 3 discrete sections: Attack, Body and Tone. Attack and Body are sample-based, the Tone section is based on a sine wave oscillator.
Controls are provided to completely customize every nuance of the bass drum sound as well as tweak it in realtime.
1 Attack
» On/Off
Toggle the Attack sound on/off
» Volume
Adjust the Attack volume
» Tune
Adjust the pitch: -12 to +24 semitones
» HPF
High-pass filter cutoff frequency
» Decay
Attack section decay time
» Air
Attack section reverb amount
» Preset : Screen
Click to access Attack sample menu
» Preset : Prev/Next
Navigate the available Attack samples
2 Body
» On/Off
Toggle the Body sound on/off
» Volume
Adjust the Body volume
» Tune
Adjust the pitch: -12 to +24 semitones
» HF
High-pass filter cutoff frequency
» LF
Low-pass filter cutoff frequency
» Attack
Body section attack time
» Decay
Body section decay time
» Preset : Screen
Click to access Body sample menu
» Preset : Prev/Next
Navigate the available Body samples
3 Tone
» On/Off
Toggle the Tone sound on/off
» Volume
Adjust the Tone volume
» Pitch
Change the Tone pitch from G0 to G1
» Attack
Tone section attack time
» Decay
Tone section decay time
» Depth
Adjust the amount of pitch modulation
» Rate
Adjust the speed of pitch modulation
» Drive
Adjust the amount of drive
17
UES DrumShaper - Snare Drum
1
Main
3
Part 2
Part 1
3
Globals
2
Tone
4
The Snare sound is constructed from 4 parts: Main, Part 1, Part 2, and Tone. Main, Part 1 and Part 2 sections are sample-based, the Tone section is based on a sine wave oscillator. Essential controls are provided for each section including pan pots for Part 1 and 2. The snare drum module allows you to quickly dial in simple or complex sounds able to fit your mix perfectly.
1 Main
» On/Off
Toggle the Main sound on/off
» Volume
Adjust the Main section volume
» Tune
Adjust the pitch: -12 to +24 semitones
» Preset : Screen
Click to access the Main sample menu
» Preset : Prev/Next
Navigate the available Main samples
2 Globals
» HPF
High-pass filter cutoff frequency
» LPF
Low-pass filter cutoff frequency
» Decay
Decay time for Main, Part 1 and 2
» Sparkle
Reverb amount for Main, Part 1 and 2
3 Part 1 / Part 2
» On/Off
Toggle the sound on/off
» Volume
Adjust the part volume
» Tune
Adjust the pitch: -12 to +24 semitones
» HPF
High-pass filter cutoff frequency
» Pan
Adjust the sounds stereo position
» Preset : Screen
Click to access the Part sample menu
» Preset : Prev/Next
Navigate the available Main samples
4 Tone
» On/Off
Toggle the Tone sound on/off
» Volume
Adjust the Tone volume
» Pitch
Change the Tone pitch from G0 to G1
» Attack
Tone section attack time
» Decay
Tone section decay time
» Depth
Adjust the amount of pitch modulation
»
Rate
Adjust the speed of pitch modulation
» Drive
Adjust the amount of drive
18
UES DrumShaper - Clap
Part 1 / Part 2
1
2
Globals
UES DrumShaper’s Clap instrument provides 2 layers with some unique controls to construct Electro-style clap sounds. Each layer is sample-based and offers a proprietary mode control paired with a detune and a high-pass filter, allowing you precise control over the sounds depth and tonality. Global controls allow you to introduce offset between the layers, apply filtering, and add reverb, punch or delay.
1 Part 1 / Part 2
» On/Off
Toggle the sound on/off
» Volume
Adjust the part volume
» Tune
Adjust the pitch: -12 to +24 semitones
» Mode
Adjust the sound character: 1-4, from simple to complex
» Detune
Adjust the mode detune amount
» HPF
High-pass filter cutoff frequency
» Preset : Screen
Click to access the Clap sample menu
» Preset : Prev/Next
Navigate the available samples
2 Globals
» Offset
Adjust the time between part 1 and 2
» LPF
Low-pass filter cutoff frequency
» Freq
Equalizer frequency
» Gain
Equalizer gain amount
» Snap
Mix in some ‘snap’ sound
» Decay
Adjust the clap decay amount
» Delay
Delay amount
» Sparkle
Reverb amount
19
UES DrumShaper - HiHat
CH Sample Layer
1
CH Modeled Layer
2
OH Layer
3
The HiHat instrument is divided into 3 sections: a sample-based layer for the closed hat, an analog modeled layer for the closed hat, and a sample-based layer for the open hat. Essential controls are provided for each section allowing you to tune, shape and customize the right sound for your mix.
1 CH Sample Layer
» On/Off
Toggle the sound on/off
» Volume
Adjust the layer volume
» Tune
Adjust the pitch: -12 to +24 semitones
» HPF
High-pass filter cutoff frequency
» LPF
Low-pass filter cutoff frequency
» Decay
Decay time for the CH sample layer
» Drive
Drive amount for the CH Sample layer
» Sparkle
Reverb amount for the CH Sample Layer
» Preset : Screen
Click to access the CH sample menu
» Preset : Prev/Next
Navigate the available samples
2 CH Modeled Layer
» On/Off
Toggle the sound on/off
» HPF
High-pass filter cutoff frequency
» Freq
Equalizer frequency
» Gain
Equalizer gain amount
» Decay
Decay time for the CH Modeled layer
» Amplitude Envelope Shape
Select the desired amp envelope shape
» Delay
Delay amount for the CH Modeled layer
» Sparkle
Reverb amount for the CH Modeled layer
3 OH Layer
» On/Off
Toggle the sound on/off
» Volume
Adjust the OH volume
» Tune
Adjust the pitch: -12 to +24 semitones
» HPF
High-pass filter cutoff frequency
» LPF
Low-pass filter cutoff frequency
» Decay
Decay time for the OH sample layer
» Drive
Drive amount for the OH Sample layer
» Sparkle
Reverb amount for the OH Sample layer
» Preset : Screen
Click to access the OH sample menu
» Preset : Prev/Next
Navigate the available samples
20
UES DrumShaper - Pattern
Step Sequencer
1
2
Seq Controls
UES DrumShaper includes a basic 16-step sequencer that can be used in a typical sense in your compositions or merely as a quick way to review how your drum sounds mix together in real time. The sequencer is synchronized to the main tempo of UVI Workstation/MF3.
1 Step Sequencer
» Step Entry
Step entries can have 1 of 3 states:
OFF: no sound triggered
RED: trigger at maximum volume
ORANGE: trigger at medium volume
2 Seq Controls
» Play/Pause
Start/stop the sequencer
» Clear
Initializes the sequencer
» Groove
Adjust the amount of Groove/Swing
» Clap Shift
Pre-delay amount for the clap
21
UES MissionControl
Global
1
Section Controls
2
1 Globals
» Play/Pause Button
» Momentary Play/Pause note
2 Section Controls
» BD + SD / HH / Percs
Individual instrument control
» Bassline / Synth1 / Synth2
Individual instrument control
» Volume
Changes the volume for the instrument
» Mute / Solo
Mute or Solo the instrument
» LP / HP
Adjust low and high pass filter cutoff frequency
» Tune
Adjust pitch in semitones/cents
» Octave
Adjust pitch from -1 to +1 octave
» Previous / Next
Browse between loops
MIDI Mapping
» Play/Stop C1 - B1
22
UES SweepMachine
Sub Noise
2
Noise
1
Sweep Control
4
FX Panel
6
3
Metal
5
LFO
UES SweepMachine is 100% dedicated to creating the best noise sweeps possible. Like all the Electro Suite instruments, it’s easy to use. Simply trigger a MIDI note, select one of the four presets, set the number of bars you want the sweep to last and that’s it! Three noise generators are available including
Noise, Sub Noise, and Metal.
1 Noise
» On/Off
» Preset List
» Volume
» Q
Adjust the filters resonance
» Filter
Select filter type
2 Sub Noise
» On/Off
» Volume
Adjust the part volume
» Q
Adjust the filters resonance
» Filter
Select filter type
3 Metal
» On/Off
» Preset List
» Volume
» Q
Adjust the filters resonance
» Filter
Select filter type
4 Sweep Control
» In
Enable/disable envelope start from 0 to full
» Out
Enable/disable envelope start from full to 0
» Modwheel
Control filter with the modwheel
» Bars Slider
(If modwheel is off) select the number of bars for the envelope to go from 0 to full
» Curve
Set envelope curve shape
5 LFO
» List
Select LFO waveform
» Sync
Sync to host tempo
» Speed
Set LFO speed
» Max Depth
Adjust maximum depth of the LFO
» Rise to Depth
Adjust time to LFO maximum depth
» Rise to Speed
Adjust time to LFO maximum speed
6 FX Panel
» Flanger
Enable/disabe, feedback, and dry/wet settings
» Delay
Enable/disabe, time, feedback, and dry/wet settings
» Sparkle
Enable/disabe, room size, and dry/wet settings
23
Construction Kits and Samples
Using Construction Kits, Loops and Samples
Load a construction kit, loop or sample through the browser, just like you would a regular UVI instrument.
Overview
Electro Suite comes with construction kits made up of drum samples, loops and melodic loops and phrases. Construction kits load as playable instruments complete with FX within UVI Workstation or
Mach Five. Each construction kit has a custom MIDI map specific to the kit.
One of the great things about construction kits as that all tempo synced loops and samples will automatically sync to your host tempo
(or the global tempo if you’re working in standalone mode).
Additionally, construction kits have been broken down into individual samples and loops (wav files) for use in your DAW or other plugins.
Files are organized both by construction kit and by sample/loop type so that you can find what you’re looking for quickly. Wav files can be drag-and-dropped directly from the browser or single part window into your DAW or onto your desktop, or loaded as parts and played directly in UVI Workstation or MachFive.
For more information on using sample parts in UVI Workstation or
MachFive please consult the respective user guide.
MIDI map and macro effect details vary per construction kit and are documented in the info screen (1) as seen above
Drag-and-drop to
DAW, Desktop, etc.
WAV files can be double-clicked and loaded as playable parts within
UVI Workstation, or drag-and-dropped directly from the browser
Drag-and-drop to
DAW, Desktop, etc.
Additionally you can drag-and-drop samples or loops to your DAW or desktop with the D&D button in a single part
24
Bass
Bass-Actarus
Bass-Afro One
Bass-Basta Ring
Bass-Blond Maniac
Bass-Bread Of Sugar
Bass-City Mobile
Bass-Do It Move It
Bass-Doggistic.M5p
Bass-Down To The DR
Bass-Elasti City
Bass-Emolead
Bass-From Hell
Bass-From River
Bass-Hall Thug
Bass-Hardy Soon
Bass-Heighteasing
Bass-Home Age
Bass-House App
Bass-Jack In
Bass-Just Like That
Bass-Laborious
Bass-Liberation
Bass-Loungistic
Bass-My Bipper
Bass-Nectar Club
Bass-Nelly Dream
Bass-Number One
Bass-Oh Doll
Bass-Old Nerd
Bass-Oliver Train
Bass-On Fire
Bass-Out Of The Box
Bass-Perc Lounge
Bass-Pianoptical
Bass-Pop Tek
Bass-Progressive Work
Bass-Pure 80s
Bass-Rider
Bass-Rock Steady
Bass-Say What
Bass-Too Hot
Bass-Two LFOs
Bass-Typical D
Bass-Vacuum
Bass-Vulcania
Bass-Wanna Fight
Construction Kits
Lead - Pad
Lead-Bread Of Sugar
Lead-Happy End
Lead-Home Age
Lead-Jack In
Lead-Pure 80s
Lead-Too Hot
Pad-Progressive Work
Pad-VIPing
Synth-Seq
Synth-Actarus 1
Synth-Actarus 2
Synth-Afro One 1
Synth-Afro One 2
Synth-Appollo 1
Synth-Appollo 2
Synth-Basta Ring 1
Synth-Basta Ring 2
Synth-Blond Maniac
Synth-City Mobile
Synth-Confidential
Synth-Do It Move It
Bell, Piano
Bell-Hardy Soon
Glock-Loungistic
Key-Men Da Riot
Key-Pianoptical
Piano-Pianoptical
Pizz-DoubleYou
Pizz-Hardy Soon
Pizz-On Fire
Guitar
Guitar-Do It Move It
Guitar-Happy End
Guitar-Home Age
Guitar-House Mess
Guitar-Nectar Club
Guitar-Tech All
Hits
Hit-Afro One
Hit-Hall Thug
Hit-Nectar Club
Hit-On Fire
Hit-Out Of The Box
Synth-Domestic 1
Synth-Domestic 2
Synth-DoubleYou
Synth-Down To The DR 1
Synth-Down To The DR 2
Synth-Down To The DR 3
Synth-Elasti City
Synth-Electro FAQ
Synth-EmoLead
Synth-From Hell 1
Synth-From Hell 2
Synth-From Hell 3
Synth-From River
Synth-Hall Thug
Synth-Happy End
Synth-Hardy Soon 1
Synth-Hardy Soon 2
Synth-Heighteasing
Synth-House App 1
Synth-House App 2
Synth-House App 3
Synth-Iceberger 1
Synth-Iceberger 2
Synth-Jack In 1
Synth-Jack In 2
Synth-Just Like That 1
Synth-Just Like That 2
Synth-Laborious 1
Synth-Laborious 2
Synth-Laborious 3
Synth-Land House
Synth-Liberation 1
Synth-Liberation 2
Synth-Liberation 3
Synth-LOL To Date 1
Synth-LOL To Date 2
Synth-Loungistic 1
Synth-Loungistic 2
Synth-Loungistic 3
Synth-Men Da Riot
Synth-My Bipper 1
Synth-My Bipper 2
Synth-My Bipper 3
Synth-Nectar Club
Synth-Nelly Dream 1
Synth-Nelly Dream 2
Synth-Number One 1
Synth-Number One 2
Synth-Oh Doll 1
Synth-Oh Doll 2
Synth-Oh Doll 3
Synth-Old Nerd
Synth-Oliver Train 1
Synth-Oliver Train 2
Synth-On Fire 1
Synth-On Fire 2
Synth-Out Of The Box
Synth-Perc Lounge 1
Synth-Perc Lounge 2
Synth-Perc Lounge 3
Synth-Pop Tek
Synth-Progressive Work
Synth-Rider 1
Synth-Rider 2
Synth-Rock Steady 1
Synth-Rock Steady 2
Synth-Tech All
Synth-Two LFOs
Synth-Typical D 1
Synth-Typical D 2
Synth-Typical D 3
Synth-Vacuum
Synth-VIPing
Synth-Vulcania 1
Synth-Vulcania 2
Synth-Vulcania 3
Synth-Wanna Fight 1
Synth-Wanna Fight 2
Synth-Yes We Can 1
Synth-Yes We Can 2
Synth-Yes We Can 3
25
Samples
Drums Construction Kits
126-Delicious
5 Loops, 19 Elements
128-Air Beat
4 Loops, 30 Elements
128-Clu Beat
4 Loops,19 Elements
128-Da Buzz
4 Loops,21 Elements
128-Djembe Nerd
11 Loops, 14 Elements
128-Fiesta Beer
4 Loops, 23 Elements
128-Funkyness
4 Loops, 10 Elements
128-Lost In Dance
5 Loops, 22 Elements
128-Miamibiza
4 Loops, 15 Elements
128-Mixing Genre
6 Loops, 14 Elements
128-Motor Clap
4 Loops, 34 Elements
128-My Pride
5 Loops, 14 Elements
128-Santiago
4 Loops, 24 Elements
128-Twenty Times
5 Loops, 14 Elements
128-Working Flow
4 Loops, 6 Elements
130-Chorus Line
4 Loops, 6 Elements
130-Fat and Co
4 Loops, 17 Elements
132-Big Clapping
5 Loops, 6 Elements
132-Chanon
5 Loops, 16 Elements
132-In The Club
4 Loops, 12 Elements
Musical Construction Kits
125-A-Basta Ring
9 Loops, 9 Elements
125-A-Double You
8 Loops, 12 Elements
125-B-EmoLead
11 Loops, 8 Elements
125-B-Iceberger
10 Loops, 8 Elements
125-C-Electro FAQ
9 Loops, 16 Elements
125-C-House Mess
11 Loops, 12 Elements
125-C-Oliver Train
9 Loops, 10 Elements
125-D-Land House
8 Loops, 15 Elements
125-D-Wanna Fight
8 Loops, 12 Elements
125-D#-Heighteasing
8 Loops, 11 Elements
125-E-Do It Move It
11 Loops, 15 Elements
125-F-Laborious
12 Loops, 16 Elements
125-F-Vacuum
9 Loops, 13 Elements
126-A-Afro One
12 Loops, 10 Elements
126-A-Appollo
11 Loops, 11 Elements
126-B-Down To DR
9 Loops, 12 Elements
126-C#-Actarus
8 Loops, 14 Elements
126-D-Doggistic
7 Loops, 12 Elements
126-D-From Hell
11 Loops, 11 Elements
126-D-Oh Doll
10 Loops, 12 Elements
126-D-Perc Lounge
12 Loops, 9 Elements
126-E-Bread Of Sugar
9 Loops, 9 Elements
126-F-Rider
8 Loops, 9 Elements
126-F#-Two LFOs
12 Loops, 13 Elements
127-C#-Say What
9 Loops, 11 Elements
127-D#-Progress Work
10 Loops, 10 Elements
128-A-Liberation
8 Loops, 18 Elements
128-A-Pianoptical
15 Loops, 10 Elements
128-A-Pure 80s
10 Loops, 9 Elements
128-A-Too Hot
9 Loops, 12 Elements
128-A#-Nelly Dream
15 Loops, 9 Elements
128-B-Pop Tek
8 Loops, 10 Elements
128-C-Out Of The Box
12 Loops, 16 Elements
128-C#-Happy End
10 Loops, 9 Elements
128-C#-Home Age
9 Loops, 8 Elements
128-D-City Mobile
8 Loops, 12 Elements
128-D-LOL To Date
10 Loops, 17 Elements
128-D-Rock Steady
9 Loops, 5 Elements
128-D#-Hall Thug
9 Loops, 7 Elements
128-D#-Jack In
10 Loops, 12 Elements
128-D#-Men Da Riot
8 Loops, 11 Elements
128-D#-Number One
10 Loops, 7 Elements
128-D#-Yes We Can
8 Loops, 9 Elements
128-E-Blond Maniac
9 Loops, 26 Elements
128-E-Confidential
9 Loops, 9 Elements
128-E-Domestic
10 Loops, 14 Elements
128-E-Hardy Soon
10 Loops, 9 Elements
128-E-Nectar Club
12 Loops, 10 Elements
128-E-Tech All
8 Loops, 13 Elements
128-E-Typical D
7 Loops, 14 Elements
128-E-VIPing
14 Loops, 5 Elements
128-F#-On Fire
10 Loops, 20 Elements
128-G-Elasti City
9 Loops, 14 Elements
128-G-House App
9 Loops, 6 Elements
128-G-Loungistic
11 Loops, 7 Elements
130-B-Vulcania
9 Loops, 12 Elements
130-C-Old Nerd
8 Loops, 11 Elements
130-C#-Just Like That
11 Loops, 12 Elements
130-G-My Bipper
12 Loops, 5 Elements
132-A-From Rive
10 Loops, 21 Elements
Sorted Elements
Bass Drum - 215 samples
Snare Drum - 267 samples
Hand Clap - 199 samples
Hi-Hats - 154 samples
Percussion/Cymbals -
136 samples
Synths - 23 samples
Hits - 15 samples
Miscs - 37 samples
Sorted Loops
FullNoBD - 60 loops
Drums - 82 loops
DrumsNoBD - 81 loops
Instrumental - 60 loops
BD+SD - 80 loops
HH - 56 loops
Percs-Misc - 93 loops
Bass - 48 loops
Synths - 111 loops
26
UVI Workstation: Tips + Tricks
MIDI Learn Arpeggiator
Most UVI Workstation parameters can be automated via. a convenient
MIDI Learn. MIDI Learn allows you to bind a physical MIDI controller to specific parameters within UVI Workstation.
Any FX tab parameter, Macro Knob or Slider in UVI instruments can use the MIDI Learn feature
The MIDI controller type and the MIDI Channel assignment will be saved with the multi or with your song in the host sequencer
Automation is assigned per-part
To use MIDI Learn:
1. Right-click the parameter in UVI Workstation that you want to automate
2. After the MIDI Learn dialog appears, Trigger the desired MIDI input controller (knob, fader etc.)
To remove a MIDI controller assignment:
Right-click the desired parameter and press “Delete”
Unlimited FX
UVI Workstation comes equipped with a robust arpeggiator. To insert an arpeggiator in a part, you need to display the Single view in the
UVI Workstation, then click on the note icon. The arpeggiator can be employed as a pattern gate, arpeggiator, or even an advanced rhythmic processor for your live MIDI performance or sequenced MIDI tracks. Arpeggiators can be inserted in an unlimited number of parts.
Preset Stacking
Thanks to the simplicity of the UVI Workstation you can stack as many presets as you want by simply assigning multiple parts on the same MIDI channel.
Split, Velocity & Key Switch
UVI Workstation offers a wide variety of FX, or effect processors, to cover all your audio processing needs. The FX implementation is robust and includes the ability to insert unlimited FX slots in several stages of the signal flow.
Click the “FX” tab to open the FX page on the Single view
In Multi view the FX section is always displayed
The Keyswitch settings allow you to load multiple presets into two or more parts and dynamically play and mute them from your MIDI controller using key switching, note range, velocity range or any combination of the three parameters. This powerful feature gives you a great deal of real-time control.
Scroll Wheel
All knobs can be adjusted with the scroll wheel on your mouse.
When you double-click on any knob or slider, you can manually enter or type in the desired value.
27
Links
UVI
Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . uvi.net/
Download UVI Workstation and User Manuals . . . . . . . . . . . . . . . . . . uvi.net/downloads
Your Registered Product Serial Numbers and Download Links. . . . . . . . . uvi.net/my-products
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . uvi.net/faq
Tutorial and Demo Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . youtube.com/
Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . uvi.net/contact-support
iLok
Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ilok.com/ iLok License Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ilok.com/ilm.html
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ilok.com/supportfaq
28
Credits and Thanks
Produced by UVI
Recording / Editing / Sound Design
Damien Vallet
Emmanuel Usai
Alain J Etchart
Mastering
Chris Gerhinger / Sterling Sound / New York
Software + Scripting
Olivier Tristan
Remy Muller
UI Design
Nathaniel Reeves
Graphic Design
Anthony Hak
Nate Lindley
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 EULA
- 3 Table of Contents
- 4 Introduction
- 5 System Requirements
- 6 Installation
- 7 Step 2: Activate Your License
- 8 Step 3: Install Your Instrument
- 9 Step 4: Load Your Instrument
- 10 UES CarminePoly
- 12 UES DirtyMONO
- 12 Synth
- 13 FX
- 14 Phraser
- 16 UES DrumShaper
- 16 Overview
- 17 Bass Drum
- 18 Snare Drum
- 19 Clap
- 20 HiHat
- 21 Pattern
- 22 UES MissionControl
- 23 UES SweepMachine
- 24 Construction Kits and Samples
- 27 UVI Workstation Tips and Tricks
- 28 Links
- 29 Credits and Thanks