Rear View Safety RVS-577FW Wireless Safety Camera System Instruction manual
Add to My manuals26 Pages
The Rear View Safety RVS-577FW is a wireless safety camera system designed to enhance visibility and safety while operating forklifts, featuring a 5.6-inch dual-screen display, allowing simultaneous viewing of multiple camera feeds. With instant pairing, magnetic camera installation, remote control operation, and multiple display modes, the system provides a comprehensive solution.
advertisement
Instruction Manual
Wireless Safety Camera System for Forklifts with 5" Dual Screen Display
RVS-577FW
Reverse With Confidence ™ 1
2
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04-06
Before Beginning Installation . . . . . . . . . . . . . . . . . . . . . . . 07-08
System Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
09
Monitor Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-11
Remote Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
Triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13-14
Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15-19
Pairing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
Monitor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
Rear View Safety
NOTE!
Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty.
Congratulations on purchasing a Safety
Camera System!
With this manual you will be able to properly install and operate the unit.
This system is intended to be installed as a supplement aid to your standard rear view mirror that already exists in your vehicle. The system should not be used as a substitute for the standard rear view mirror or for any other mirror that exists in your vehicle.
In some jurisdictions, it is unlawful for a person to drive a motor vehicle equipped with a TV viewer or screen located forward of the back of the driver’s seat or in any location that is visible, directly or indirectly, to the driver while operating the vehicle.
Reverse With Confidence ™ 3
4
Please read the entire manual and follow the instructions and warnings carefully. Failure to do so can cause serious damage and/or injury, including loss of life. Be sure to obey all applicable local
traffic and motor vehicle regulations as it pertains to this product.
Improper installation will void manufacturer’s warranty.
USAGE:
• The system is designed to help the driver safely detect people and/or objects helping to avoid damage or injury. However, you the driver, must use it properly. Use of this system is not a substitute for safe, proper or legal driving.
• The system is not intended for use during extensive back-up maneuvers or backing into cross traffic or pedestrian walkways.
• Please, always remember, the area displayed by the system is limited.
It does not display the entire panorama that is behind you.
• Never back up while looking at the monitor alone. You should always check behind and around the vehicle when backing up, in the same way as you would if the vehicle did not have the system. If you back up while looking only at the monitor, you may cause damage or injury.
Always back up slowly.
Rear View Safety
INSTALLATION:
•
• Electric shock or product malfunction may occur if this product is installed incorrectly.
or disconnected wire may cause a fire.
• Use this product within the voltage range specified. Failure to do so can cause electronic shock or product malfunction.
• While installing the Rear View
System be careful with the wire positioning in order to avoid wire damage.
• The Rear View System should only be used when the vehicle is in reverse.
• Take special care when cleaning the monitor.
Make sure to firmly affix the product before use.
• Do not watch movies or operate the monitor while driving; as it may cause an accident.
• If smoke or a burning smell is detected, disconnect the system immediately.
• Do not install the monitor where it may obstruct drivers view or obstruct an air bag device.
• Where the power cable may touch a metal case, cover the cable with friction tape. A short circuit
• Dropping the unit may cause possible mechanical failure.
Reverse With Confidence ™ 5
If you have questions about this product, contact:
Rear View Safety
1797 Atlantic Avenue
Brooklyn, NY 11233
Tel: 1.800.764.1028
IN NO EVENT SHALL SELLER OR MANUFACTURER BE
LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM
ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
6 Rear View Safety
Before drilling please check that no cable or wiring is on the other side of the wall. Please clamp all wires securely to reduce the possibility of them being damaged while vehicle is in use. Keep all cables away from hot/moving parts and electrical noisy components.
We recommend doing a benchmark test before installation to insure that all components are working properly.
Step 1: Choose the monitor and camera locations.
Step 2: Install all cables in vehicle, when necessary a 0.8 (20mm) hole should be drilled for passing camera cable through vehicles walls. Install split grommets where applicable.
Step 3: Once all cables and wiring have been properly routed, perform a system function test by temporarily connecting the system.
Reverse With Confidence ™ 7
Warning!
1. This monitor is high voltage. Only professionals should open the monitor's case.
2. Do not watch the video while driving unless you are monitoring the rear view camera display.
8 Rear View Safety
System Features
• Dual screen display - Can view 2 cameras simultaneously
• Normal/Mirror/Flip/Mir-Flip viewing modes
• Split/Auto-scan/Single display modes
• Instant Pair - Pair system without leaving your seat
• Magnetic camera - Simple installation
• Remote control
• 4 video inputs - Connect up to 3 additional cameras
• Multiple video formats: PAL/NTSC
• Wide voltage input: 10 - 32V
• Wireless/Magnetic/Waterproof camera
• Automatic trigger switch
In The Box
1 x 2.4G Digital 5.6" Wireless Color LCD Monitor
1 x Wireless, Magnetic and Waterproof Forklift Camera
1 x Wireless Transmitter
1 x Wireless Antenna
1 x Monitor Mount
1 x Sunshade
1 x U-Bracket Kit
2 x Mounting Pads
1 x Remote
1 x Power Connection Wire
Reverse With Confidence ™ 9
10 Rear View Safety
Monitor Introduction
1. Power indicator/On switch
2. Toggle volume up
3. Toggle volume down
4. Enter menu item/save user settings
5. Enter menu
6. Toggle channels
7. Speaker
8. U-Bracket screw position
9. Mounting attachment
Remote Introduction
Reverse With Confidence ™ 11
Remote Introduction
1. Mute/Unmute
2. Enter menu/save settings
3. Toggle volume down
4. Jump Key - Jump to specified display mode
5. Instant pair
6. Turn monitor on/off
7. Toggle volume up
8. Enter menu
9. Toggle MIR/Flip display modes
10. Toggle PAL/NTSC
Basic Wiring
12
• Red wire to positive DC/10-32V power supply
• Black wire to ground
• Brown wire to reverse power
• White wire to left turn signal
• Blue wire to right turn signal
• Green/yellow wire to other positive power supply
Rear View Safety
Triggers
When green trigger wire is activated, camera switches to CAM1
When white trigger wire is activated, camera switches to CAM2
(left side camera)
When blue trigger wire is activated, camera switches to CAM3
(right side camera)
When brown trigger wire (reversing) is activated, camera switches to
CAM4 (backup camera)
This also displays gridlines
Reverse With Confidence ™ 13
When yellow trigger wire is activated, monitor switches to dual display.
Volume With Dual Display
14
Use volume toggle buttons to select the channel for audio out.
Rear View Safety
Menu Introduction
MENU is only allowed for operation under single image mode, not dual display mode. Press MENU to display the following options and settings: MODE/PICTURE/MIR-FLIP/AUTOSCAN/SYSTEM/PAIRING.
Mode
Press - or + to select MODE. Press to enter.
Press - or + to select SPLIT. Select OFF to exit SPLIT menu.
Split trigger is disabled when split mode is off.
Reverse With Confidence ™ 15
Picture
Press - or + to select Picture. Press to enter.
16
Brightness/Contrast/Hue/Volume
Press - or + to select BRIGHTNESS/CONTRAST/HUE/VOLUME.
Press to enter. Press MENU to return to main menu.
Rear View Safety
Mir-Flip
Press - or + to select MIR-FLIP.
Press to enter. Press MENU to return to main menu.
Press - or + to select NORMAL / MIRROR / MIR-FLIP / FLIP.
Press MENU to return main menu.
Reverse With Confidence ™ 17
AutoScan
Press - or + to select Autoscan. Press to enter.
18
Press - or + to select CAM1/CAM2/CAM3/CAM4/SCANTIME.
Press to enter. When the icon turns yellow, press - or + to select or adjust. Press to exit. Press MENU to return to main menu.
No video will be displayed under AUTOSCAN mode if a channel is turned
OFF.
SCANTIME duration is 5-45 seconds. Toggle up/down in 5 second intervals.
Rear View Safety
System
Press - or + to select SYSTEM. Press to enter.
Time: Press - or + to select TIME. Press to enter. Press - or + to adjust.
Color-Sys: Press - or + to select COLOR-SYS. Press to enter. Press
- or + to adjust.
Auto-Dim: Press - or + to select AUTO-DIM. Press to enter, press - or + to select ON/OFF. When setting is ON, the backlighting automatically adjusts depending on the enviorment.
Electronic Distance Label (Distance Gridlines): Press - or + to select
ELECTRONIC DISTANCE LABEL. Press to enter. Press - or + to turn distance gridlines ON/OFF. When it is on, distance gridlines will be displayed on CAM4.
Reverse With Confidence ™ 19
Pairing
Press - or + to select SYSTEM.
Press to enter. Press MENU to return to main menu.
20
Instant Pair
Select the channel to pair, the monitor will display the message
“PAIRING START 50”. Turn camera on during countdown. The monitor and cameras will synchronize themselves with each other after the camera is powered for 5 seconds. The video will be displayed if instant pairing is successful. Repeat the pairing if “No Signal” displays.
Rear View Safety
Monitor Specification
LCD Size
Resolution
Contrast
5.6"
640 x 3 (RGB) x 480
500:1
Brightness
Viewing Angle
200 cd/m²
U: 50 / D: 70, R/L 70
Video Inputs 4
Operating Frequency 2400 - 2483.5 MHz
Receiving Sensitivity -89 dBm
Decompression Form MPEG4
Transmit Output Power 17 dBm
Modulation
Time Delay
2.4G FSK / GFSK
120ms
Transmitting Distance 120m (394 foot)
System Format PAL / NTSC
Power Supply DC 10-32V
Power Consumption Max 5W
Speaker 1W / 8Ω
Operating Temperature -20°C ~ +70°C, RH 90%
Storage Temperature -30°C ~ +80°C, RH 90%
Reverse With Confidence ™ 21
22
Camera Specs
Sensor
TV System
Effective Pixels
Sensing Area
1/3" CMOS PC 3089
PAL / NTSC
756 x 504 Pixels
4.80mm x 3.73mm
Scanning System
Sync System
2:1 Interlace
Internal
Horizontal Sync Frequency 15.625 kHz / 15.734 kHz
Vertical Sync Frequency 50 Hz / 60 Hz
Video Output
Gamma Correction
AGC
S/N Ratio
White Balance
Electronic Shutter
BLC
Operation Frequency
Line of Sight Range
Receiving Sensitivity
Video Codec
Frame Rate
Transmission Power
Spread Spectrum
Delay
RF Bit Rate
1.0Vp-p, 75Ω
0.45
Auto
Better than 46.5dB
Auto
Auto:1/60 (NTSC) / 1/50
(PAL) ~ 1/100,000 Seconds
Auto
2400-2483.5MHZ
50m
-89dBm
MPEG4
PAL: 25f/s NTSC: 30f/s
20dBm
FHSS
120ms
4Mbps
Operating Temperature -20°C ~ 70°C, RH 95% MAX
Storage Temperature -30°C ~ 80°C, RH 95% MAX
Minimum Illumination 0.1 Lux
Power Supply
Waterproof Rating
Viewing Angle
DC 10 ~ 32V
IP69K
45°
Rear View Safety
Troubleshooting
Problem Possible Causes/Solutions
No picture/sound Power switch is set OFF. Check power connection/
No signal source.
Check camera power supply. Pair the monitor and camera again.
Dark Picture Adjust brightness/contrast.
No Color Adjust hue.
Reverse With Confidence ™ 23
24
ONE YEAR WARRANTY
REAR VIEW SAFETY, INC. WARRANTS THIS PRODUCT AGAINST MATERIAL DEFECTS FOR A
PERIOD OF ONE YEAR FROM DATE OF PURCHASE. WE RESERVE THE RIGHT TO REPAIR OR
REPLACE ANY SUCH DEFECTIVE UNIT AT OUR SOLE DISCRETION. REAR VIEW SAFETY, INC.
IS NOT RESPONSIBLE FOR A DEFECT IN THE SYSTEM AS A RESULT OF MISUSE, IMPROPER
INSTALLATION, DAMAGE OR MISHANDLING OF THE ELECTRONIC COMPONENTS. REAR VIEW
SAFETY, INC. IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES OF ANY KIND.
THIS WARRANTY IS VOID IF: DEFECTS IN MATERIALS OR WORKMANSHIP OR DAMAGES
RESULT FROM REPAIRS OR ALTERATIONS WHICH HAVE BEEN MADE OR ATTEMPTED BY
OTHERS OR THE UNAUTHORIZED USE OF NONCONFORMING PARTS; THE DAMAGE IS DUE
TO NORMAL WEAR AND TEAR, THIS DAMAGE IS DUE TO ABUSE, IMPROPER MAINTENANCE,
NEGLECT OR ACCIDENT; OR THE DAMAGE IS DUE TO USE OF THE REAR VIEW SAFETY, INC.
SYSTEM AFTER PARTIAL FAILURE OR USE WITH IMPROPER ACCESSORIES.
WARRANTY PERFORMANCE
DURING THE ABOVE WARRANTY PERIOD, SHOULD YOUR REAR VIEW SAFETY PRODUCT
EXHIBIT A DEFECT IN MATERIAL OR WORKMANSHIP, SUCH DEFECT WILL BE REPAIRED WHEN
THE COMPLETE REAR VIEW SAFETY, INC. PRODUCT IS RETURNED, POSTAGE PREPAID AND
INSURED, TO REAR VIEW SAFETY, INC. OTHER THAN THE POSTAGE AND INSURANCE
REQUIREMENT, NO CHARGE WILL BE MADE FOR REPAIRS COVERED BY THIS WARRANTY.
WARRANTY DISCLAIMERS
NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THE ABOVE WARRANTY
IS MADE WITH REGARD TO THIS REAR VIEW SAFETY, INC. REAR VIEW SAFETY, INC. DISCLAIMS
ANY IMPLIED WARRANTY OR MERCHANT-ABILITY OR FITNESS FOR A PARTICULAR USE OR
PURPOSE AND ALL OTHER WARRANTIES IN NO EVENT SHALL REAR VIEW SAFETY. INC.
LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES OR FOR
ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A
CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING,
BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.
Rear View Safety
DISCLAIMER
REAR VIEW SAFETY AND/OR ITS AFFILIATES DOES NOT GUARANTEE OR PROMISE THAT THE
USER OF OUR SYSTEMS WILL NOT BE IN/PART OF AN ACCIDENT OR OTHERWISE NOT COLLIDE
WITH AN OBJECT AND/OR PERSON. OUR SYSTEMS ARE NOT A SUBSTITUTE FOR CAREFUL
AND CAUTIOUS DRIVING OR FOR THE CONSISTENT ADHERENCE TO ALL APPLICABLE TRAFFIC
LAWS AND MOTOR VEHICLE SAFETY REGULATIONS. THE REAR VIEW SAFETY PRODUCTS ARE
NOT A SUBSTITUTE FOR REARVIEW MIRRORS OR FOR ANY OTHER MOTOR VEHICLE
EQUIPMENT MANDATED BY LAW. OUR CAMERA SYSTEMS HAVE A LIMITED FIELD OF VISION
AND DO NOT PROVIDE A COMPREHENSIVE VIEW OF THE REAR OR SIDE AREA OF THE VEHICLE.
ALWAYS MAKE SURE TO LOOK AROUND YOUR VEHICLE AND USE YOUR MIRRORS TO CONFIRM
REARWARD CLEARANCE AND THAT YOUR VEHICLE CAN MANEUVER SAFELY. REAR VIEW
SAFETY AND/OR ITS AFFILIATES SHALL HAVE NO RESPONSIBILITY OR LIABILITY
FOR DAMAGE AND/OR INJURY RESULTING FROM ACCIDENTS OCCURRING WITH VEHICLES
HAVING SOME OF REAR VIEW SAFETY PRODUCTS INSTALLED AND REAR VIEW SAFETY AND/
OR ITS AFFILIATES, THE MANUFACTURER, DISTRIBUTOR AND SELLER SHALL NOT BE LIABLE
FOR ANY INJURY, LOSS OR DAMAGE, INCIDENTAL OR CONSEQUENTIAL, ARISING OUT OF THE
USE OR INTENDED USE OF THE PRODUCT. IN NO EVENT SHALL REAR VIEW SAFETY AND/OR
ITS AFFILIATES HAVE ANY LIABILITY FOR ANY LOSSES (WHETHER DIRECT OR INDIRECT, IN
CONTRACT, TORT OR OTHERWISE) INCURRED IN CONNECTION WITH THE SYSTEMS,
INCLUDING BUT NOT LIMITED TO DAMAGED PROPERTY, PERSONAL INJURY AND/OR LOSS OF
LIFE. NEITHER SHALL REAR VIEW SAFETY AND/OR ITS AFFILIATES HAVE ANY
RESPONSIBILITY FOR ANY DECISION, ACTION OR INACTION TAKEN BY ANY PERSON IN
RELIANCE ON REAR VIEW SAFETY SYSTEMS, OR FOR ANY DELAYS, INACCURACIES AND/OR
ERRORS IN CONNECTION WITH OUR SYSTEMS FUNCTIONS.
Reverse With Confidence ™ 25
If you have any questions about this product, contact:
Rear View Safety, Inc.
1797 Atlantic Avenue
Brooklyn, NY 11233
800.764.1028
Better Cameras. Better Service.
IT’S OUR GUARANTEE.
26 Rear View Safety
advertisement
Related manuals
advertisement