advertisement
BX-5E2/5E3 User Manual
Date:2012-07-18
2012-6-27
UM
12070901
All rights reserved. No part of this publication may be reproduced in any form by print, photo print, microfilm or any other means without written permission by ONBON.
©2010-2011Onbon
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
Version history:
Version Date
1.0
20012-6-27
Author
Zhongli Qin
Description
BX-5E2/5E3 controller user manual
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
1.1
1.2
2.1
2.2 Ethernet port
2.3
5.1
5.2
5.3
7.1 Status indicator light S1
7.2
7.3
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
U ser M anual
1.
Products description
BX-5E2/5E3 support large area LED display screen, and it is widely used in many kinds of large area LED lintel display screen and LED cluster display system; Well, this product is mainly support network, like LAN and internet. So, it is the best choice for network single screen and cluster display system, which would satisfy many of your requirements.
1.1
Function description
Storage capacity
Adapter range
Software function
4MByte
All sized single/double color LED display screen
Grouping cluster management/multi-program edit/ multi-area display/multilanguage version
Program type
Program quantity
Area type
Common programs/ Sharing programs
Support 512 programs, and 32 areas/program
Frame show
Background composition
Clock show
Image/text/animation/time/dial/timer/temperature/temperature & humidity/noise
The most advanced colorful and magical program frame/area frame
Support text background/picture background
Communication port
Dial/Chinese $ English clock/timer(all support multi-group display)
100M Ethernet/RS232/RS485/USB, RS485 $ USB could be customized
Two specifications: one: standard with RS232, another: standard with 100M
Display port
Ethernet & RS232
2 nos 50pin port
Sensor support Temperature/temperature & humidity/noise
Remote controller function
Adjust brightness
Remote control switch
Select program/lock screen/adjust brightness/on & off/ screen text
16 grades bright, support automatic adjusting/ adjusting by software/ adjusting by remote controller
Support timing automatic on & off/ on & off by software/ on & off by remote controller
Working voltage 5V
Maximum power ≤2.5W
Working temperature
-30℃~70℃
Application development
Offer completely functional DLL
Bundled software
LedshowTW2012
Using manual " 5 th generation multi-area LED Image&Test Controller user manual"
Display adapter HUB256-T8 HUB128-T8 HUB256-T12 HUB128-T12
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
1.2
Screen size
Controller model
BX-5E2
BX-5E3
Controlling pixel
Single&doubl e color
512k 点
Screen size
4096*16 4096*96 4096*128
2048*128 2048*192 2048*256
Single&doubl e color
1024k
4096*16 4096*128 4096*256
2048*128 2048*256 2048*512
Specification
1. 1 nos 50pin display sending port(height≤256 pixels)
2. When the height is about
128 pixels, then the wide should not over 2048 pixels
1. 2 nos 50pin display sending port(height≤256 pixels)
2. When the height is about
256 pixels, then the wide should not over 2048 pixels
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
2.
Interface/Port
1 5
1 4 1 3
1
2
3
4
1 2 1 1 1 0
5
6
10
11
12
13
14
7
8
4
5
6
2
3
Number Interface name
1 Reset pin
RS485 chip
RS232 chip
DB9 port
Ethernet port
Description
Recover to factory status
RS485 Serial port chip
RS232 Serial port chip
Serial port DB9 port
Ethernet port
5V power indicator light Indicator light worked when power gets right, or it won't work
5V power port
Multi-functional switch
Wide voltage: 3.5V-6,5V
Support:
1) Test LED display screen
2) Select playing program
9
15
Infrared remote controller port
Connect infrared receiver, and operate the controllers by infrared remote controller
50 pin port Support HUB T08/T12
Status indicator light S1 Indicator light working status
Status indicator S2
RTC battery
Temperature sensor port
Temperature & humidity sensor port
Not work now
RTC power supply battery; voltage: 3V
Connect with18b20 temperature sensor
Connect with temperature & humidity sensor
9
8
7
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
2.1
Serial port
2
3
Controller serial port is DB9, and the pins are like:
Pins No.
Pins name Description
TXD
RXD
RS232 sending
RS232 receiving
5
7
8 DATARS485 signal line
Notes: Do not use other pins. The 232 communication mode uses 232 serial port straight through wire.
GND
DATA+
(RS232/485) power ground
RS485 signal line
Controllers support 232 and 485 serial communication modes. When the controller (with 232 communication mode) connects with computer, use 232 serial port straight through wire. Showed as below:
Controller P C
2
3
5
2.2
Ethernet port
If controller uses RJ45 Ethernet port, then connects to computer Ethernet by reticle ( or to router and switch Ethernet ). And our controllers support these two reticle: straight through wire and cross wire. Reticle construction:
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
Temperature & humidity sensor port
The temperature & humidity sensor port only supports our temperature & humidity sensor.
Showed as below:
Number
1
Name
GD
Specification
Power grand line connects with the black line of temperature & humidity sensor
2 DA
3 CK
Data line connects with the yellow line of temperature & humidity sensor
Clock line connects with the blue line of temperature & humidity sensor
4 3V Power line connects with the red line of temperature & humidity sensor
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
1 2 3 4
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
UM
12070901
3.
Controller structure chart
The picture showed below is BX-5E3, specification of BX-5E2 is the same with BX-5E3.
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
10
UM
12070901
4.
DC feature
Working voltage: 4.5V~5.5V
Working electric current: ≤800mA
Power: ≤4W
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
11
UM
12070901
5.
Using steps
5.1
Connect with controller and computer
Controllers support 232/485 serial port and Ethernet port. You'd better ensure the communication mode according to the controller model and hardware before connect controller and computer.
Controller is with two versions: serial port and Ethernet port. For Ethernet port controller, please connect the Ethernet port of computer with network cross wire or straight through wire, and be sure that the wire is worked. About the construction, please refer to " Ethernet port ".
For serial port controller, it is decided by the communication mode: 232 or 485. Please check the second and third ports on the controller, if it's with 232 chip, then controller is 232 communication; if it's with 485 chip, then controller is 485 communication. Please check the "
Serial port " about the definition of serial port and connecting methods. Please ensure that the serial port line connecting correct before connect with the controller serial port and computer port.
After connecting with controller and computer, supplying 5V power to controller and then connects to the power port. Well, please check that the connecting line is worked, then start the controller. And if you are going to connect with LED display screen, you are supposed to let all connected : controller with 50pin port, HUB board and LED display screen, then start.
Screen parameters and scan configuration
Open the software " LedshowTW 2012 ", click " set screen parameters" on the " setup" menu, input the password "168", then you could get into the screen parameters setting.
Set screen parameters, steps:
Step 1: Select a correct controller model, and usually, PC software could identify the controller model automatically if you connect right.
Step 2: Select a correct communication mode and configurate communication port parameters correctly.
Step 3: According to the different structure of the board, select a correct scan configuration file on " Quick scan", then click " write scan configuration".
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
12
UM
12070901
Step 4: Click " write screen parameters ". Showed as below:
When you set scan configuration, if there's no scan configuration in your needs, then choose
"scan configuration", it includes most of the display configuration files which is popular in the market. And if you want to get other adjustments, please read the content on " Help".
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
13
UM
12070901
Edit and send program
Choose " program 1" on the left side, click " Image " on the tool bar as to add a Image area, click " Dial " as to add a dial area. Then, on the Image area, add a text and edit the informations you want to send → setup the " display method" and " run speed ". Showed as below:
Click " send " on the tool bar as to send the present program.
The above just tell you how to edit and send program, if you want to know more, please read the content on " Help ".
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
14
UM
12070901
6.
Recover to factory firmware
Sometimes, the controller may shut down, and cannot communicate successfully, then, you need to recover to factory firmware. Operations: Interrupt the power of controller, then connect the reset pin and GD by wire → start till the light S1 worked → interrupt the two pins. Showed as below:
1
2
Number
1
2
Name
GD
Recover to factory status
Specification
Power ground
Recover to factory status, with low power
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
15
UM
12070901
7.
Bug checking
7.1
Status indicator light S1
The indicator light S1 is used for indicating the driving status of controller, showed as below:
Status No Status indicator light S1 Specification
1
2
3
Blink every 3 seconds
Blink every 0.1 seconds
Blink every 1 seconds
Controller worked
Something wrong with time and data of the controller
The controller firmware disappeared
7.2
2
3
4
5
6
7
8
9
Common bugs
Bug No.
1
Bug phenomenon
Power indicator light does not work
Status indicator light S1 does not work
Communication with software failed
Controller's time wrong
The time cannot be saved after timing
Data wrong in temperature and humidity area
Status indicator light S1 prompts something wrong; led screen display normal.
Status indicator light S1 prompts something wrong; led screen prompts "
ERRO019".
Solving methods
Check the power connecting line, text the power voltage, as to ensure all of them are in normal.
Please check that the power supply is normal, and check the board, is there any component dropped.
Please check that the software parameters setting, the communication line and the communication port of computer are correct or not,
Open the software and timing.
Change RTC battery.
Please check that the connecting line of temperature & humidity sensor is correct, then reweld the sensor.
Please check that is there any cold joint or burn of controller's hardware, then change the damaged components.
Controllers damaged, you'd better return it to our factory to have a test.
Status indicator light S1 prompts something wrong; led screen prompts " bug in memorizer ".
Controllers damaged, you'd better return it to our factory to have a text.
7.3
Notes
�
BX-5E2/5E3 with 5V power supply, and pay more attention that do not reverse
� Please do not insert or draw out the serial port, Ethernet and 50pin port with power.
�
Store the controllers in a dry and shade place.
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
16
UM
12070901
8.
Contact us
Add: Floor 7, Tower 88, 1199#, North Qinzhou Road, Xuhui District, Shanghai, China.
Tel: 021-64554198 021-64554199
Fax: 021-64955166 Zip code: 200233
Website: http://www.onbonbx.com
http://onbonbx.en.alibaba.com
Tel: 86-21-64955100 86-15921814956
Email: [email protected]
Routes:
1) Metro ninth line: Caohejing station, No.1 exit, then walk for about 10 minutes.
2) Bus route: 205 or 257 to Guiping road Qingjiang road.
Shanghai ONBON Software Technology Co.,Ltd | BX-5E2/5E3 User Manual
17
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Productsdescription
- 5 Functiondescription
- 6 Screensize
- 7 Interface/Port
- 8 Serialport
- 8 Ethernetport
- 9 Temperature&humiditysensorport
- 11 Controllerstructurechart
- 12 DCfeature
- 13 Usingsteps
- 13 Connectwithcontrollerandcomputer
- 13 Screenparametersandscanconfiguration
- 15 Editandsendprogram
- 16 Recovertofactoryfirmware
- 17 Bugchecking
- 17 StatusindicatorlightS1
- 17 Commonbugs
- 17 Notes
- 18 Contactus