Honeywell HFD40HD4 Specification

Performance Series HQA WDR 4MP Fisheye Camera www.honeywell.com/security

SECTION 28 21 11

WDR 4MP HQA FISHEYE CAMERA

Guide Specifications in CSI Format

800-24293 Rev A

PART 1 GENERAL

1.1

SECTION INCLUDES

A.

Provide a 4M HQA fisheye camera with a 1.18 mm fixed lens for video surveillance, including design, supply, installation, and commissioning.

1.2

RELATED SECTIONS

NOTE TO SPECIFIER: Include related sections as appropriate if video surveillance system is integrated with other systems.

A.

Section 26 05 00

– Common Work Results for Electrical.

B.

Section 27 15 00 – Communications Horizontal Cabling.

C.

Section 28 05 00 – Common Work Results for Electronic Safety and Security.

D.

Section 28 20 00 – Video Surveillance.

E.

Section 28 21 00 – Surveillance Cameras.

F.

Section 28 23 00 – Video Management Systems.

1.3

REFERENCES

A.

Reference Standards: Provide systems that meet or exceed the requirements of the following publications and organizations as applicable to the work of this section:

1.

Canadian ICES-003.

2.

Canadian Standards Association (CSA).

3.

Conformity for Europe (CE).

4.

Electronic Industries Alliance (EIA).

5.

Federal Communications Commission (FCC).

6.

Joint Photographic Experts Group (JPEG).

28 21 11-1

Performance Series HQA WDR 4MP Fisheye Camera www.honeywell.com/security

7.

National Television Systems Committee (NTSC).

Guide Specifications in CSI Format

800-24293 Rev A

8.

Phase Alternating Line (PAL).

9.

Underwriters Laboratories Inc. (UL).

1.4

SYSTEM DESCRIPTION

A.

The HQA fisheye camera shall be equipped with a 1/3 ″ 4.1 MP progressive scan CMOS imager to capture 2560 × 1440 (25fps) images, and shall feature a 1.18 mm fixed lens.

1.5

SUBMITTALS

A.

General: Submittals shall be made in accordance with the Conditions of the

Contract and Submittal Procedure Section.

B.

Manufacturer’s Product Data: Submit manufacturer’s data sheets indicating systems and components proposed for use, including instruction manuals.

C.

Shop Drawings: Submit complete shop drawings including connection diagrams for interfacing equipment, list of connected equipment, and locations for major equipment components.

D.

Record Drawings: During construction, maintain record drawings indicating the location of equipment and wiring. Submit an electronic version of record drawings not later than Substantial Completion of the project.

E.

Operation and Maintenance Data: Submit manufacturer’s operation and maintenance data, customized to the system installed. Include system and operator manuals.

F.

Field Tests: Submit results of field testing of every device including date, testing personnel, retesting date (if applicable), and confirmation that every device passed field testing.

G.

Maintenance Service Agreement: Submit a sample copy of the manufacturer’s maintenance service agreement, including cost and services for a one year period for Owner’s review. Maintenance shall include, but not be limited to, labor and materials to repair the system, tests and adjustments, and regular inspections.

28 21 11-2

Performance Series HQA WDR 4MP Fisheye Camera www.honeywell.com/security

Guide Specifications in CSI Format

800-24293 Rev A

1.6

QUALITY ASSURANCE

A.

Manufacturer: Minimum 10 years’ experience in manufacturing and maintaining video surveillance systems. Manufacturer shall provide toll-free technical assistance and support available 24/7.

B.

Manufacture Location: Provide equipment assembled in China.

C.

Installer: Minimum 2 years’ experience installing similar systems and shall be acceptable to the manufacturer of the video surveillance system.

D.

Regulatory Requirements:

1.

Emissions: FCC, Part 15B, EN55032:2012 +AC:2013

2.

Immunity: EN50130-4:2011

3.

Safety: EU: EN60950-1

4.

ROHS: EN50581:2012

E.

Environmental Requirements:

1.

Operating Temperature:

–22°F to 140°F (−30°C to 60°C).

F.

Power Requirements: Input shall be 12 V DC.

1.7

DELIVERY, STORAGE, AND HANDLING

A.

Deliver materials in manufacturer’s labeled packages. Store and handle in accordance with manufacturer’s requirements, in a facility with environmental conditions within recommended limits.

1.8

WARRANTY

A.

Manufacturer’s Warranty: Submit manufacturer’s warranty of five (5) years from the manufacture date code under normal use and service for the video surveillance system.

PART 2 PRODUCTS

2.1

MANUFACTURER

A.

Camera Manufacturer: Honeywell Performance Series HQA WDR 4M fisheye camera, www.honeywell.com/security .

28 21 11-3

Performance Series HQA WDR 4MP Fisheye Camera www.honeywell.com/security

Guide Specifications in CSI Format

800-24293 Rev A

B.

Accepted Part Numbers:

HFD40HD4: WDR 4M fisheye camera, 1/3 ″ 4.1 MP CMOS, 1.18 mm Fixed, 12 V

DC.

2.2

SYSTEM COMPONENTS

A.

Fisheye camera and cabling.

2.3

OPERATIONAL REQUIREMENTS

A.

The HQA fisheye camera system shall meet or exceed the following camera specifications:

1.

Image Sensor: 1/3-inch 4.1 MP CMOS.

2.

Total Effective Pixels: 2688(H) × 1520 (V).

3.

Lens Type: 1.18 mm fixed, F2.0.

4.

Horizontal Angle of View: 180°.

5.

Minimum Illumination: 0.01Lux/F2.0 (Color), 0.001lux/F2.0(B/W)

6.

Shutter Speed: 1/3(4) –1/100000 s.

7.

Signal-to-Noise Ratio: 65 dB or more.

8.

Video Output: 1-channel BNC HQA high definition video output & 1-channel

BNC CVBS video output.

9.

Resolution: 4MP (2560 × 1440).

10.

Frame Rate: 25 fps at 4M.

B.

The HQA fisheye camera shall provide 2D/3D Noise Reduction (2/3DNR) to save storage and bandwidth.

C.

The HQA fisheye camera shall plug-and-play with 4/8/16-channel Honeywell

Performance Series HRHQ DVRs.

D.

The HQA fisheye camera shall provide configurable motion detection and camera tamper detection settings.

E.

The HQA fisheye camera shall provide up to eight configurable privacy zones.

F.

The HQA fisheye camera shall provide 12 V DC operation.

28 21 11-4

Performance Series HQA WDR 4MP Fisheye Camera www.honeywell.com/security

2.4

SYSTEM HARDWARE

Guide Specifications in CSI Format

800-24293 Rev A

A.

The HQA fisheye camera shall have the following mechanical specifications:

1.

Unit Dimensions (W × H): 5.39 × 5.35 in. (137 × 136 mm).

2.

Unit Weight: 0.99 lb (0.45 kg).

B.

The HQA fisheye camera shall have the following electrical specifications:

1.

Power Supply: 12 V DC.

2.

Power Consumption: 2.2 W maximum.

C.

The HQA fisheye camera shall be designed to meet the following environmental conditions:

1.

Operating Temperature:

–22°F to 140°F (–30°C to 60°C).

2.

Relative Humidity: Less than 90 percent, non-condensing.

2.5

MANUFACTURER SUPPORT

A.

Manufacturer shall provide customer service, pre-sales applications assistance, after-sales technical assistance, access to online technical support, and online training using Web conferencing.

B.

Manufacturer shall provide 24/7 technical assistance and support by means of a tollfree telephone number at no extra charge.

PART 3 EXECUTION

3.1

EXAMINATION

A.

Examine site conditions prior to installation. Notify Architect and Owner in writing if unsuitable conditions are encountered. Do not start installation until site conditions are acceptable.

3.2

INSTALLATION

A.

All components of the camera system shall be thoroughly tested before shipping to the project location.

B.

Camera system shall be installed, programmed, and tested in accordance with manufacturer’s installation instructions.

1.

Coordinate interfaces with Owner’s representative where appropriate.

28 21 11-5

Performance Series HQA WDR 4MP Fisheye Camera www.honeywell.com/security

Guide Specifications in CSI Format

800-24293 Rev A

2.

Provide conduit, cable, and wire for a complete and reliable installation.

Obtain Owner’s approval for exact location of the camera and all boxes, conduit, cable, and wiring runs prior to installation.

3.

Install conduit, cable, and wire parallel and square with building lines, including raised floors areas. Do not exceed 40 percent fill in conduits. Gather wires and tie to create an orderly installation.

4.

Coordinate with other trades to provide proper sequencing of installation.

3.3

FIELD COMMISSIONING AND CERTIFICATION

A.

Field Commissioning: Test fisheye camera system as recommended by manufacturer, including the following:

1.

Conduct complete inspection and testing of equipment, including verification of operation with connected equipment.

2.

Test devices and demonstrate operational features for Owner’s representative and authorities having jurisdiction, as applicable.

3.

Correct deficiencies until satisfactory results are obtained.

4.

Submit written copies of test results.

3.4

TRAINING

A.

Conduct on-site system administrator and security/surveillance operator training, with the number of sessions and length of sessions as recommended by the video surveillance system manufacturer. Training shall include, but not limited to, camera administration, provisioning, configuration, operation, and diagnostics.

END OF SECTION

28 21 11-6