- Computers & electronics
- Telecom & navigation
- Mobile phones
- Car kits
- Rohl
- CUKIT2121NHB-PN
- Specification
ROHL CUKIT2121NHB-PN *CVR* 5.5 GPM KIT ROHL QUARTILE BAT Specification
Add to My manuals6 Pages
Rohl CUKIT2121NHB-PN is a high-quality exposed thermostatic tub filler with a handshower, a 59-inch metal hose, and floor pillar legs or supply unions. Constructed with durable ABS material, it features a single-function handshower with a 2 GPM flow rate. The exposed thermostatic design allows for precise temperature control, ensuring a comfortable bathing experience. Decorative shut-offs are available separately, providing customization options for your bathroom. Installation requires a maximum male stub out of 9/16 inches for floor legs, and the floor legs cannot be cut down.
advertisement
▼
Scroll to page 2
of
6
www.rohlhome.com QUARTILE EXPOSED THERMOSTATIC TUB FILLER WITH HANDSHOWER AND FLOOR PILLAR LEGS OR SUPPLY UNIONS Italian Bath Quartile CUKIT2121NHB FEATURES COLORS/FINISHES WARRANTY • • • • • • Polished Chrome • Polished Nickel • Satin Nickel • Limited lifetime 8 5/16” 8 5/16” 6” fixed center-to-center measurement Maximum male stub out 9/16” for floor legs Floor legs cannot be cut down 59” length metal hose 2 GPM ABS construction single-function handshower • Decorative shut-offs available. See page 349. • Kit includes: — CU212HB exposed thermostatic bathtub/shower mixer with handshower and hose — ZA386 floor pillar legs — ZZ9826502 floor leg mounted handshower holder 3 15/16” 11” 34 7/8” 6" Ø1" G1/2" Female NPT Ø3 7/8" Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com. www.rohlhome.com CISAL CISAL CISAL 28010 28010 Alzo Alzo di Pella Pella - Italia - Italia 28010 Alzo di Pella - di Italia Tel.Tel. +39Tel. 0322+39 918111 - Fax +39 0322 +39 0322 0322 918111 918111 - Fax - Fax +39969518 +39 03220322 969518 969518 [email protected] - www.cisal.it [email protected] [email protected] - www.cisal.it - www.cisal.it ROHL ROHL LLCLLC ROHL LLC 3 PARKER - IRVINE, CA92618 3 PARKER 3 PARKER - IRVINE, - IRVINE, CA92618 CA92618 TEL: 800-777-9762 FAX: 714-557-8635 TEL:TEL: 800-777-9762 800-777-9762 FAX: FAX: 714-557-8635 714-557-8635 www.rohlhome.com www.rohlhome.com www.rohlhome.com Installation Instructions ZA386 FLOOR LEGS INSTRUCTIONS ZA386 ZA386 FLOOR FLOOR LEGS LEGS- -ASSEMBLY -ASSEMBLY ASSEMBLY INSTRUCTIONS INSTRUCTIONS 2 1 2" 9/3 5 2" " 2 2 3 3 2 9 /2 9 / G . 1 / 2 " N P T 5 5 DO DO NOTNOT OVER OVER TIGHTEN TIGHTEN G.1 G/.21"/N 2P " NTP T n.19/32" - max.3/4" min.19m / 3i 2 " - max.3/4" min.19/32" - max.3/4" 4 9/ 5 2 2" 2" G9. /13/ 2 " N P T 9/3 5 25 2 G.1/2"NPT G . 1G/ .21" /N2P "N TP T 5 6 6 5 51 5 5 / 352/"3 2 " Ø13/32" 5 54 2 2 1 1 3 3 1 3 / 1 6" 6 6 1 71/ 176"/ 1 6" 2 3 2" G . 1G/ .21" /N2P "N TP T 1 7 / 1 6" 5/32" 3 3 WARNING DO NOT WARNING WARNING OVER TIGHTEN G.1/2"NPT G.1 G/.21"/N 2P " NTP T 4 4 3 2 2 min.19/32" - max.3/4" min.19/32" - max.3/4" min.19/32" - max.3/4" 1 1 PARTS ENSURING MECHANICAL FIXING 6 6 1 31/ 136"/ 1 6" PARTS PARTS ENSURING ENSURING 3 4 4 MECHANICAL MECHANICAL FIXING FIXING 1 3 / 1 6" 1 31/ 136/"1 6" Ø13 Ø/1332/"3 2 " Installation requirements: 2 x 1/2” NPT male stub outs at 5 29/32” center Please note: if installing with an Italian Bath exposed tub filler you must install a set of adaptors C5574EXT 1 Apply Teflon tape to the male connections. then turn with a strap wrench ½ to ¾ turn to make a seal. 2 Hand tighten, Installation Installation requirements: requirements: 2 x21/2” x 1/2” NPT NPT male male stub stub outs outs atthe at 5 29/32” 5 29/32” center WARNING: Do not over tighten. Over tightening could cause brass tocenter crack. Please Please note: note: installing if installing with an an Italian Italian Bath Bath exposed exposed tubtub filler filler youyou must must install install a set a set of adaptors of adaptors C5574EXT C5574EXT Test forifleaks beforewith installing floor escutcheons. Please note that the threaded connection only ensures hydraulic water tightness, mechanical fixing 4 . Apply Teflon tape to to the male male connections. ofTeflon floortape legs is the ensured byconnections. the whole part assembly of components listed as 1-2-3-4-5 in picture 1 1 Apply 3 Slide on base escutcheons (1) and the cut bushings (2). Hand tighten, tighten, then then turn turn with with a drilling. strap a strap wrench wrench ½½ to ¾ to ¾ turnturn to make to make a seal. a seal. 2 2Hand Mark the screw holes for WARNING: WARNING: DoDo notnot over over tighten. tighten. Over Over tightening tightening could could cause cause thethe brass brass to crack. to crack. Test Test forDrill for leaks leaks before before installing installing floor floor escutcheons. escutcheons. a hole using a 13/32” drill and install floor anchors (3). 4 Please Please note note thatthat thethe threaded threaded connection connection only only ensures ensures hydraulic water water tightness, tightness, mechanical mechanical fixing fixing Slide the base escutcheons (1) to the floor, align with hydraulic holes and tighten Allen screws (4) using a 5/32” Allen wrench. 4 . 4 .using a 1 7/16” wrench. Insert bushings (2) into the base escutcheons and slide listed on listed the as threaded ring (5). tighten of floor of floor legs legs isthe ensured iscut ensured by by the the whole whole part part assembly assembly of components of(1)components as 1-2-3-4-5 1-2-3-4-5 in picture inThen picture Install elbow unions (6) to pillar legs, using a 1 3/16” wrench, ensuring that all washers create a seal. Slide base base escutcheons escutcheons (1) (1) andand thethe cutcut bushings bushings (2).(2). 5 on on 3 3Slide Install tub faucet to elbow unions using a 1 3/16” wrench, ensuring that all washers create a seal. Mark Mark thethe screw screw holes holes for for drilling. drilling. a hole a hole using using a 13/32” a 13/32” drilldrill andand install install floor floor anchors anchors (3).(3). 4 4 DrillDrill Consult yourSlide local ROHL showroom for additional information andthe specifications. For complete warranty details and a list ofscrews showrooms, to using www.rohlhome.com. Slide thethe base base escutcheons escutcheons (1) (1) to the to floor, floor, align align with with holes holes andand tighten tighten Allen Allen screws (4)go (4) using a 5/32” a 5/32” Allen Allen wrench. wrench. Insert Insert thethe cutcut bushings bushings (2) (2) intointo thethe base base escutcheons escutcheons (1) (1) andand slide slide on on thethe threaded threaded ringring (5).(5). Then Then tighten tighten using using a 1a7/16” 1 7/16” wrench. wrench. Install elbow elbow unions unions (6) (6) to pillar to pillar legs, legs, using using a 1a3/16” 1 3/16” wrench, wrench, ensuring ensuring thatthat all all washers washers create create a seal. a seal. 5 5 Install 2 www.rohlhome.com Installation Instructions ZA386 COLONNES DE PLANCHER – INSTRUCTIONS DE MONTAGE 2 1 3 min.19/32" - max.3/4" 2" 9/3 5 2 G.1/2"NPT ATTENTION NE PAS TROP SERRER min.19/32" - max.3/4" G.1/2"NPT 4 9/ 5 2 3 2" G.1/2"NPT G.1/2"NPT 5 6 6 1 7 / 1 6" 1 3 / 1 6" 5 5/32" 2 4 1 PIÈCES ASSURANT LA FIXATION MÉCANIQUE 1 3 / 1 6" 3 Ø13/32" Exigences d'installation: 2 embouts mâles 1/2" NPT entraxe 5 29/32" Noter SVP: s’il s’agit d’une installation avec une robinetterie de baignoire apparente Italian Bath, vous devez installer un ensemble d'adaptateurs C5574EXT. 1 Appliquer du ruban téflon sur les raccords mâles. 2 Serrer à la main, puis tourner à l'aide d'une clé à sangle de ½ à ¾ de tour pour sceller. ATTENTION: ne pas trop serrer. Un serrage excessif pourrait provoquer une fissure du laiton. Vérifiez qu’il n’y ait aucune fuite avant d'installer les supports de fixation au sol. Noter SVP que la connexion filetée assure seulement l'étanchéité hydraulique, alors la fixation mécanique des colonnes au sol est assurée par le montage de l'ensemble des composants indiqués 1-2-3-4-5 dans l'image 4 . 3 Faire glisser les supports de fixation au sol (1) et les bagues coupées (2). Repérer les trous de vis pour le perçage. 4 Percer un trou à l'aide d'une pointe de 13/32" et installer les chevilles de fixation au sol (3). Faire glisser le supports de fixation (1) sur le sol, les aligner avec les trous et serrez les vis Allen (4) à l'aide d'une clé de 5/32". Insérer les bagues coupées (2) dans le supports de fixation (1) et faire glisser la bague filetée (5). Serrez-la ensuite à l'aide d'une clé de 1 7/16 ". 5 Installer les coudes (6) sur les colonnes, à l'aide d'une clé de 1 3/16", en s’assurant que tous les joints fassent bien l’étanchéité. Installer la robinetterie de baignoire sur les coudes à l’aide d’une clé 1 3/16”, en s’assurant que tous les joints fassent bien étanchéité. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com. 3 www.rohlhome.com Installation Instructions ZA386 COLUMNAS DE SUELO - INSTRUCCIONES DE MONTAJE 2 3 2" 9/3 5 2 G.1/2"NPT ATENCIÓN NO APRIETE DEMASIADO G.1/2"NPT min.19/32" - max.3/4" min.19/32" - max.3/4" 1 4 9/ 5 2 3 2" G.1/2"NPT G.1/2"NPT 5 6 6 1 7 / 1 6" 1 3 / 1 6" 5 5/32" 2 4 1 COMPONENTES QUE ASEGURAN LA FIJACIÓN MECÁNICA 1 3 / 1 6" 3 Ø13/32" Requisitos de instalación: dos racores macho de 1/2” NPT con distancia entre los centros de 5 29/32” Tenga en cuenta que si lo instala con una grifería de la colección Italian Bath, debe instalar un juego de adaptadores C5574EXT. 1 Aplique cinta de Teflon a la conexión macho. 2 Apriete a mano, luego gire de ½ a ¾ vuelta con una llave de correa para sellar. ADVERTENCIA: No apriete demasiado. Si se aprieta demasiado puede romperse el latón. Pruebe las fugas antes de instalar los embellecedores del suelo. Tenga en cuenta que la conexión roscada solo garantiza la estanqueidad hidráulica del agua, y tenga en cuenta que la fijación mecánica de las columnas de suelo está garantizada por el ensamblaje complete de la pieza con los componentes 1-2-3-4-5 en la imagen 4 . 3 Deslice sobre los embellecedores de fijación (1) y los casquillos (2). Marque los orificios de los tornillos para taladrar. 4 Taladre un agujero con una broca de 13/32” y instale la fijación de suelo (3). Deslice los embellecedores de fijación (1) al suelo, alinéelos con los agujeros y apriete los tornillos Allen (4) con una llave Allen de 5/32”. Inserte los casquillos (2) en los embellecedores de fijación (1) y deslice sobre la tuerca (5). Luego apriete usando una llave 1 7/16”. 5 Instale las uniones (6) a las columnas de suelo, usando una llave de 1 3/16”, asegurándose de que todas las guarniciones creen un sello estanco. Instale la grifería de bañera en las uniones usando una llave de 1 3/16”, asegurándose de que todas las guarniciones creen un sello estanco. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com. 4 CISAL CISAL 28010 28010 AlzoAlzo di Pella di Pella - Italia - Italia Tel. Tel. +39 +39 03220322 918111 918111 - Fax- Fax +39 +39 03220322 969518 969518 [email protected] [email protected] - www.cisal.it - www.cisal.it ROHL ROHL LLCLLC 3 PARKER 3 PARKER - IRVINE, - IRVINE, CA92618 CA92618 TEL:TEL: 800-777-9762 800-777-9762 FAX: FAX: 714-557-8635 714-557-8635 www.rohlhome.com www.rohlhome.com www.rohlhome.com min.19/32" - max.3/4" min.19/32" - max.3/4" 1 1 ZA386 ZA386FLOOR FLOORLEGS LEGS- ASSEMBLY - ASSEMBLYINSTRUCTIONS INSTRUCTIONS Please contact the 2local ROHL retailer or showroom 2 3 3 where you purchased this product for all warranty related claims. 2" 2" 9 / 39 / 3 5 25 2 G.1 G/.21"/N 2P " NTP T WARNING WARNING DO DO NOTNOT OVER OVER TIGHTEN TIGHTEN ZZ93750 0 ZA386 Cod.0101234000 Ed.12.17 Installation Instructions 2" 2" 9 / 39 / 3 5 25 2 min.19/32" - max.3/4" min.19/32" - max.3/4" G.1 G/.21"/N 2P " NTP T G . 1G/ .21" /N2P "N TP T ZZ92689 0 G . 1G/ .21" /N2P "N TP T ZZ92689 0 4 4 5 5 6 6 1 71/ 176"/ 1 6" 5 / 352/"3 2 " ZZ94355 0 5 5 2 2 1 1 3 3 6 6 1 31/ 136"/ 1 6" PARTS PARTS ENSURING ENSURING 4 4 MECHANICAL MECHANICAL FIXING FIXING 1 31/ 136/"1 6" ZZ94357 0 Ø13 Ø/1332/"3 2 " ZZ94358 0 ZZ99578 0 ZZ99579 0 Installation Installation requirements: requirements: 2 x21/2” x 1/2” NPT NPT male male stub stub outs outs at at 5 29/32” 5 29/32” center center Please Please note: note: if installing if installing with with an an Italian Italian Bath Bath exposed exposed tubtub filler filler youyou must must install install a set a set of adaptors of adaptors C5574EXT C5574EXT Apply Teflon Teflon tape tape to the to the male male connections. connections. 1 1 Apply Hand tighten, tighten, then then turnturn with with a strap a strap wrench wrench ½½ to ¾ to ¾ turnturn to make to make a seal. a seal. 2 2Hand WARNING: WARNING: DoDo notnot over over tighten. tighten. Over Over tightening tightening could could cause cause thethe brass brass to crack. to crack. Test Test forfor leaks leaks before before installing installing floor floor escutcheons. escutcheons. WARNING: Please leave these instructions with the user. Do not discard them. Please Please note note thatthat thethe threaded threaded connection connection only only ensures ensures hydraulic hydraulic water water tightness, tightness, mechanical mechanical fixing fixing of floor of floor legs legs is ensured is ensured by by thethe whole whole partpart assembly assembly of components of components listed as as 1-2-3-4-5 1-2-3-4-5 in picture in .4 . ATTENTION: Remettre ces instructions àlisted l’utilisateur etpicture les4 conserver. ATENCION: Entregar estas instrucciones al usuario y conservarlas. Slide on on base base escutcheons escutcheons (1) (1) andand thethe cutcut bushings bushings (2).(2). 3 3Slide Mark Mark thethe screw screw holes holes for for drilling. drilling. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com. a hole a hole using using a 13/32” a 13/32” drilldrill andand install install floor floor anchors anchors (3).(3). 4 4 DrillDrill 5 Slide Slide thethe base base escutcheons escutcheons (1) (1) to the to the floor, floor, align align with with holes holes andand tighten tighten Allen Allen screws screws (4) (4) using using a 5/32” a 5/32” Allen Allen wrench. wrench. Insert Insert thethe cutcut bushings bushings (2) (2) intointo thethe base base escutcheons escutcheons (1) (1) andand slide slide on on thethe threaded threaded ringring (5).(5). Then Then tighten tighten using using a 1a7/16” 1 7/16” wrench. wrench. www.rohlhome.com Installation Instructions Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com. 6
advertisement
Related manuals
advertisement