Mobile data carrier
TW-BD10X1.5-19-K2
■
FRAM memory 2 kB
Functional principle
The HF read/write heads operating at a frequency of 13.56 MHz, form a transmission
zone the size of which (0…500 mm) varies,
depending on the combination of read/write
head and data carrier.
The read/write distances mentioned here only represent standard values measured under
laboratory conditions and free from any influences caused by materials.
The read/write distances of data carriers suitable for mounting in/on metal were determined in/on metal.
Type code
Ident no.
TW-BD10X1.5-19-K2
6901381
Data transfer
Operating frequency
Memory type
Chip
Memory
Memory
Freely usable memory
Number of read operations
Number of write operations
Typical read time
Typical write time
Radio communication and protocol standards
inductive coupling
13.56 MHz
FRAM
Fujitsu MB89R118
2048 byte
read/write
2000 byte
unlimited
10
0.5 ms/byte
0.5 ms/byte
ISO 15693
Minimum distance to metal
Ambient temperature
Storage temperature
Data carrier can be screwed in metal.
-25…+85 °C
-45…+85 °C
Construction
Housing material
Material active area
IP Rating
BD10x1.5
plastic, POM
plastic, yellow, POM
IP68
Packaged quantity
Special features
1
data carrier, can be screwed in metal
Attainable distances may vary by up to 30 %
due to component tolerances, mounting conditions, ambient conditions and material qualities (especially when mounted in metal)
Testing of the application under real operating conditions is therefore essential, especially with read/write on-the-fly!
Edition • 2015-03-19T15:35:57+01:00
10
1/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
Mobile data carrier
TW-BD10X1.5-19-K2
Read/write heads
Dimensions
Type designation
Ident - no.
TB-M18-H1147
Read-write distance
Transfer zone
Minimum distance between two
read-write heads
Recommended (mm)
max. [mm]
length
max. [mm]
width offset
max. [mm]
[mm]
6
14
16
8
54
6
14
16
8
54
8
17
22
11
54
8
17
22
11
54
10
20
22
11
90
10
20
22
11
90
14
29
30
15
90
14
29
30
15
90
20
39
44
22
120
7030001
TB-EM18WD-H1147
7030224
TN-M18-H1147
7030002
TN-EM18WD-H1147
7030223
TB-M30-H1147
7030003
TB-EM30WD-H1147
7030221
TN-M30-H1147
7030004
TN-EM30WD-H1147
7030222
TN-CK40-H1147
Edition • 2015-03-19T15:35:57+01:00
7030006
2/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
Mobile data carrier
TW-BD10X1.5-19-K2
Read/write heads
Dimensions
Type designation
Ident - no.
HT-IDENT-H1147
Read-write distance
Transfer zone
Minimum distance between two
read-write heads
Recommended (mm)
max. [mm]
length
max. [mm]
width offset
max. [mm]
[mm]
20
39
44
22
120
20
39
44
22
120
14
29
30
15
90
6
14
16
8
54
7030236
HT-IDENT-H1187
7030238
TN-Q14-0.15-RS4.47T
7030235
TB-Q08-0.15-RS4.47T
Edition • 2015-03-19T15:35:57+01:00
7030553
3/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com
Mobile data carrier
TW-BD10X1.5-19-K2
Compatible handhelds
PD-IDENT-HF-RWBTA (7030601)
Handheld for mobile reading and writing to data carriers.
Equipped with WLAN 802.11a/b/g/n and Bluetooth; incl.
docking station with power supply, USB cable, and TURCK RFID Software TA-HF.
PD-IDENT-HF-S2D-RWBTA (7030602)
Handheld for mobile reading and writing to data carriers.
Equipped with WLAN 802.11a/b/g/n, Bluetooth and 2 D
barcode scanner; incl. pistol grip, docking station with
power supply, USB cable, and TURCK RFID software TAHF.
Edition • 2015-03-19T15:35:57+01:00
PD-IDENT-HF-L1D-RBUP-SMART (7030564)
Handheld for mobile reading and writing to data carriers.
Keyboard functions (HID) for wireless transmission of data
via Bluetooth (also to IOS devices) or USB. Barcode 1 D
laser scanner and only three buttons for ease of use.
4/4
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.com