Digi-Key Catalog UK2011

Interface OP7200 with Touchscreen
Jackrabbit™ Low-Cost SingleBoard Computer
C
Model BL1800:
• Board Size: 2.50” x 3.50” x 0.94” (64mm x 89mm x 24mm) • Input Voltage: 8VDC ~ 40VDC,
switching regulator, 49mA typical @ 24VDC • General Purpose I/O: 14 bidirectional, 6 inputs, 4 outputs
(CMOS compatible) • High Power Outputs: 3 sinking (1 Amp) and 1 sourcing (500mA) • 1 Analog Input:
9-bit resolution, 8-bit accuracy, 0.1V ~ 2.8V input range, 75ms typical acquisition time • 2 Analog Outputs:
Filtered/buffered PWM outputs • Processor: Rabbit 2000, clock, 29.5MHz • Memory: SRAM 128K, flash
256K • Timers: Five 8-bit cascadable timers, one 10-bit timer with 2 match registers • Serial Ports: (2)
RS-232 (or one with CTS/RTS) rated @ 1KV ESD, (1) RS-485 rated @ 15kV ESD, (1) 5V CMOS compatible
(programming port), 2 serial ports can be clocked • Serial Rate: Selectable baud rates up to 115,200 bps
(RS-232), 230,400 bps (RS-485). 5 Volt CMOS compatible port up to 7.37Mbps • Additional Features:
watchdog/supervisor, time/date clock, and backup battery
Model BL1810:
Same as BL1800, except with 14.7MHz clock, 128K flash, linear regulator (7.5~25V), 3 sinking (200mA) and
1 sourcing (100mA) high-voltage outputs, and CMOS port baud rate of 3.69Mbps.
Model BL1820:
Same as BL1810, except with no battery backup, (2) RS-232 and (2) 5V CMOS compatible (programming
port)
Jackrabbit™ Development Kit
Digi-Key Part No. 316-1000-ND (101-0363) Only
96.33
Includes Jackrabbit BL1810, manual, schematics, AC adapter, prototyping board, programming cable,
documentation on CD ROM, additional parts, and complete Dynamic C® SE software development
system (not a trial version).
Description
Digi-Key
Part No.
Model BL1800
316-1079-ND
Price
Each
68.61
Rabbit
Part No.
20-101-0356
Model BL1810
316-1080-ND
47.82
20-101-0357
Model BL1820
316-1081-ND
33.96
20-101-0358
Low-Cost Single-Board Computer
Features:
• Rabbit 3000™ microprocessor operating at up to 7.4MHz
• 512K SRAM and 512K flash memory options
• 26 Digital I/O: 16 protected digital inputs and 10 high-current digital outputs
• 8 Single-ended or 4 differential analog channels with Vcc monitoring option: 11-bit single-ended or 12-bit
differential channels
• 3 PWM outputs
• Six serial ports
• Battery-backed real-time clock
• Watchdog supervisor
The LP3500 can be mounted to a panel or on a plastic-enclosure base.
Description
Digi-Key
Part No.
Price
Each
Rabbit
Part No.
Fox Tool Kit for 3500
316-1056-ND
138.60
101-0529
LP3500 Fox
316-1115-ND◆
137.91
20-101-0525
◆ RoHS Compliant
Coyote™ BL2500 Ethernet-Enabled
Single-Board Computer
Features:
• Rabbit 3000™ at 29.4 MHz
• 10Base-T, RJ-45
• 256K Flash Memory
• 128K SRAM
• Compact board size of 3.95” x 3.95” (100 x 100 mm)
• 24 digital I/O plus 1 A/D input and 2 D/A outputs along with 4 LEDs
• Six serial ports
Price
Each
Rabbit
Part No.
Model BL2500
316-1179-ND
130.98
20-101-0575
Smart Screen OP7100 with
Touchscreen
316-1175-ND
634
Price
Each
311.16
10.40
Rabbit
Part No.
20-101-0535
540-0066
◆ RoHS Compliant
Interface OP6800 with Ethernet Port
Features:
• 122 x 32 Graphic display
• 7-key keypad
• 7 LEDs
• 24 Digital I/O
• Rabbit 2000® microprocessor at 22.1MHz
• 128K static RAM and 256K flash memory
• One RJ-45 Ethernet port
• Four serial ports
• Battery-backable real-time clock, battery included
• Watchdog
• Reset generator
• Meets NEMA 4 watertightness specifications when front-panel mounted
Description
Model OP6800 with Ethernet Port
Digi-Key
Part No.
316-1060-ND
Price
Each
172.56
Rabbit
Part No.
101-0492
RabbitCore™ Application
Development Kits
Serial to Ethernet Kit
Designers now have a Serial-to-Ethernet Application Kit that is easy to use. The simple 3-Step Setup for
transmitting data from a digital volt meter via a serial port to a TCP/IP stream enables even the newest
user to quickly develop a Serial-to-Ethernet application. The kit features digital volt meter software
libraries, sample programs and a menuing system, in addition to the Dynamic C® integrated development
environment.
Includes:
• RCM3010 microprocessor core module • Prototyping board • Dynamic C development system and
complete documentation on CD-ROM • Serial cable for programming and debugging • DB9 Null Modem
Cable • 10-pin® DB9 Conversion Cable • Ethernet Crossover Cable • Getting Started manual • Keypad/
display unit • AC adapter (U.S./Canada only)
316-1042-ND
(101-0689) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Embedded PLC Application Kit
(101-1108) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
415.11
This kit enables a RabbitCore module to use the SMB (Server Message Block) protocol, more commonly
known as Windows File Sharing, for a high-capacity storage space over a network connection.
Features:
• Core Module: RabbitCore RCM4010
• IDE Hard Drive: 250 GB
• Hard Drive Chassis: Eagle Consus NAS with power supply
• Power Supply: 12VDC; 120/240VAC
• Rabbit USB programming cable
Price
Each
380.46
(101-1218) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
241.86
RCM4300 RabbitCore Simple Sensor Application Kit
Rabbit
Part No.
The Simple Sensor Application Kit provides sample applications based on 1-Wire devices to help users
better understand and implement the 1-Wire communications bus using a prototyping board and a
RabbitCore module
Kit Contents:
• RCM4300 RabbitCore Development Kit
• Simple Sensor Protoype Board with 1-Wire devices
• DS2406 SPST addressable switch, DS18B20 temperature sensor, DS2450 A/D converter, DS2480B line
driver
• Complete Dynamic C software CD with several sample programs
• Universal Power Supply
20-101-0303
316-1178-ND
(101-1288) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Free shipping on orders over £50! All prices are in British pound sterling and include duties.
(UK2011-EN)
241.86
This kit enables a Rabbit 3000 based single-board computer to be programmed using a standard software
environment that is commonly used to program PLC’s (Programmable Logic Controllers).
Features:
• Communication parameters are configurable using the Embedded PLC Utility for the Rabbit Processor
• Rabbit 3000 @ 44.2MHz
• 10Base-T, RJ-45 (standard)
• Flash Memory: 512K
• SRAM: 256K + 512K
• Digital Inputs: 16
• Digital Outputs: 8
• Analog Inputs: One 10-bit resolution
• Analog Outputs: Two 9-bit PWM
• 6 serial ports
316-1156-ND
The Smart Screen’s C-programmability provides the flexibility required for almost any display application.
The Smart Screen is ideal for remote terminals, automated machinery, and control systems
Features:
• 1/4 VGA display (320 x 240 pixels)
• Touchscreen matrix
• Vertical or horizontal orientation
• Wide viewing angle
• 16 digital I/O
• Meets NEMA 4 water resistance
Digi-Key
Part No.
Digi-Key
Part No.
316-1154-ND◆
316-1052-ND
RCM4010 RabbitCore SMB Network Storage Application Kit
Digi-Key
Part No.
Description
Description
Intelligent Operator Interface
20” Cable for Panel Mount Keyboard/display
316-1120-ND
Description
Smartscreen OP7100 with Touchscreen
Features:
• Small Size: 4.4” x 5.7” x 1.7” (112mm x 144mm x 43mm)
• 1/4 VGA LCM display (320 x 240 pixels) with white LED backlight
• 9-key keypad
• LCD controller and SRAM compatible with OP7100
• 4 Status LED’s
• 24 Digital I/O
• Rabbit 2000® microprocessor operating @ 22.1MHz
• Audible alarm buzzer
• 128K SRAM and 256K flash memory standard
• One RJ-45 Ethernet port
• Four serial ports
• On-board backup battery
• Watchdog
• External reset input
• Meets NEMA 4 watertightness specifications when front-panel mounted
www.digikey.co.uk — FREEPHONE: 0-800-587-0991 • 0-800-904-7786 — FREEFAX: 0-800-587-0992 • 0-800-904-7783
241.86