Announcement

PRODUCT LAUNCH
SKP 300 G3 plug-on transmitter
Introducing the SKP 300 G3 plug-on transmitter, featuring 48v phantom power to transform any
wired condenser microphone into a wireless microphone.
48V phantom power for powering condenser microphones
Balanced XLR-3 input
Selectable 10/30 mW RF output power
Three US frequency ranges, fully compatible with all evolution wireless systems
42 MHz switching bandwidth (1,680 tunable frequencies)
8-10 hours of operation via two AA batteries (or the optional BA 2015 AccuPack)
Key Applications
Video / ENG: Create a wireless, phantom-powered field recording system with any MKH series
shotgun mic, the new SKP 300 G3 and an EK 100 G3 portable receiver
Discussion / Presentation: Create a wireless lectern with any MZH series gooseneck mic, the new
SKP 300 G3 and an EM 300 G3 diversity receiver.
Ordering Information
The SKP 300 G3 is available for pre-ordering now. Delivery begins April 2012.
Model
Article
Frequency range
UPC code
MAP
Dealer
SKP 300 G3-A
505500
516-558 MHz
615104226043
$529.95
$395.00
SKP 300 G3-G
505501
566-608 MHz
615104226050
$529.95
$395.00
SKP 300 G3-B
505502
626-668 MHz
615104226067
$529.95
$395.00
Delivery includes:
(2) AA batteries
Operating manual
Frequency sheet
RF power sheet
RF CHARACTERISTICS
Technical Specs
SKP 300 G3
Modulation
Wideband FM
Frequency ranges:
A: 516-558 MHz; G: 566-608 MHz; B: 626-668 MHz
Switching bandwidth
42 MHz
Transmission frequencies
1,680 frequencies, tunable in 25 kHz steps
Frequency Presets
20 frequency Banks, each with up to 24 factory-preset Channels
User Banks
6 programmable frequency Banks with up to 24 user-programmable Channels
Nominal/peak deviation
±24 kHz / ±48 kHz
Frequency stability
≤ ±15 ppm
RF output power at 50 Ω
Switchable: Typ. 10 mW (“low”); Typ. 30 mW (“standard”)
Sennheiser Electronic Corporation, One Enterprise Drive, Old Lyme, CT 06371 • (860) 434-9190 • www.sennheiserusa.com
Announcement
Key Features
PRODUCT LAUNCH
SKP 300 G3 plug-on transmitter
Compander system
Sennheiser HDX
AF frequency response
80 Hz – 18 kHz
Signal-to-noise ratio (1 mV, peak deviation) ≥ 120 dBA
Total harmonic distortion (THD)
≤0.9%
Max. input voltage
6 Vrms
Input impedance
6 kΩ, balanced
Adjustment range of input sensitivity
48 dB, adjustable in steps of 6 dB
RF output power at 50 Ω
Switchable: Typ. 10 mW (“low”); Typ. 30 mW (“standard”)
Temperature range
14° F to 131° F (-10° C to +55° C)
Power supply
(2) AA batteries, 1.5 V or BA 2015 AccuPack
Nominal voltage
2.4 V DC
Power consumption
At nominal voltage: typ. 210 mA (10 mW RF, w/o P 48)
Operating time
Typ. 8 hours (30 mW RF, w/o P 48)
Dimensions
Approx. 4.1 x 1.7 x 1.7 in.
Weight (incl. batteries)
Approx. 6.9 oz.
Approvals
FCC-Part 74
FCC-ID: DMOG3SKP
Limited to 698 MHz
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating
this microphone system without a license is subject to certain restrictions: the system may not cause
harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has
no protection from interference received from any other device. Purchasers should also be aware that
the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to
change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s
wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
Marketing Materials
Visit the Sennheiser Dealer Business Net (www.sennheiserusa.com/dealerbusinessnet) to download
high-res images. Enter your Sennheiser dealer account # for access.
Questions? Contact:
Robb Blumenreder
Channel Manager, Professional Systems
(860) 434-9190, ext. 159
rblumenreder@sennheiserusa.com
Sennheiser Electronic Corporation, One Enterprise Drive, Old Lyme, CT 06371 • (860) 434-9190 • www.sennheiserusa.com
Announcement
OVERALL DEVICE
AF CHARACTERISTICS
Technical Specs