Vari-Lite ZERO WIRE CRMX Datasheet
Add to My manuals2 Pages
Vari-Lite ZERO WIRE CRMX is a wireless DMX system that offers reliable and interference-free data transmission for lighting applications. With its automated cognitive coexistence technology, it continuously scans and adapts to the best frequency, avoiding interference and optimizing performance. It features low latency (<5ms), encrypted signal, RDM support, and easy setup. The rugged enclosure and universal power supply make it suitable for various environments. Configuration can be done via simple PC software or RDM, and firmware is upgradable over Ethernet.
advertisement
Network & Data
Distribution
ZeroWire CRMX
Wireless DMX System
Features
l Wireless DMX/RDM transmitter/receiver l Automated Cognitive Coexistence
- CRMX l Low latency (>5ms) l Encrypted signal (128 bit) l RDM enabled l Ethernet or DMX input to transmitter l Single button setup l Universal PSU l Low voltage power supply option for
wire-free operation l Configuration through simple PC software
or via RDM l Firmware upgradable over Ethernet l Integral mounting options
Overview
Based on the first automated and adaptive wireless technology developed specifically for the lighting industry - the ZeroWire CRMX brings a new level of assurance to wireless DMX systems.
CRMX is the first system to continuously scan the radio spectrum and adapt to the best frequency without interruption. This avoids both interference in the increasingly crowded license free radio sphere, as well as helping to maximize the performance of all the other radio systems sharing those frequencies. In short, it’s a smart radio that adapts. Add RDM and a rugged enclosure suitable to the demands of the entertainment and architainment industry and the package is complete.
Quality you can trust 40 Years of Lighting Passion
3 years warranty Real people to help you Multilingual training team
On-line training videos Downloadable web resources Support forum
Free software upgrades ISO 9001:2008 Certified
Network & Data
Distribution
ZeroWire CRMX
Wireless DMX System
Approvals
n
FCC: 15.247&68 Class B; n
Canada ICES 003 n
CE; EN 301 489-1; EN 301 489-17; EN n
300-328-1; EN 300-328-2; EN 609 50; n
SRRC - China
Environment
n
Operating temperature range (ambient):
-20°C to +50°C / -4°F to 122°F n
Humidity: 0-90% non-condensing
Physical
n
Enclosure: Anodized extruded
aluminium n
Dimensions (W x H x D) excluding
antenna: 110mm x 44mm x 160 mm /
4,3” x 1,7” x 6,3” n
Weight: 0,8kg, 1,76lb
Connectors
n
Antenna connector: RP-TNC male n
DMX connectors: 1 XLR 5-pin male (TX)
/ 1 XLR 5-pin female (RX) n
Ethernet connectors: 1 Neutrik®
Ethercon™ RJ45 n
DC input: Pluggable terminal strip,
Phoenix® MSTB 2,5 n
AC input: IEC 320-C14 Male
Ordering Information
ZeroWire CRMX RX: 00-894-00
ZeroWire CRMX TX: 00-893-00
Supplied Accessories
n
AC power cord n
DC power connector n
2dBi RP-TNC antennas
Standards
n
USITT DMX-512 (1986 & 1990) and 512A: Yes n
Art-Net I & II, Streaming ACN (Draft & Standard): Yes n
RDM ANSI E1.20: Yes n
Firmware upgrade: Ethernet
DMX interface
n
Number of universes supported: 1 n
Full DMX fidelity and frame integrity: Yes n
W-DMX™ Compatibility: Yes, receive only[2] n
Error correction and packet recovery: Yes n
Frame synchronization: Less than 0,01 ms n
End-to-end DMX latency: Less than 5 ms n
Auto sensing of DMX frame rate and size: Yes n
Supported DMX frame rates: 0,8 – 7352 Hz n
Number of DMX channels supported: 0 – 512 n
Loss of DMX input behaviour: Timeout after 1,25s n
ESD protected interfaces: Yes n
High voltage input: 85-264VAC / 47-70Hz / 5W n
Low voltage input: 12VDC ±20% / 11W n
Power over Ethernet: Yes (on transmitter) n
Transient protected power inputs: Yes
RF characteristics
n
Automated Cognitive Coexistence: Yes n
Dynamic adaptive frequency hopping: Yes n
Recoverable Radio Packet Error Rate: 30% n
Operational frequency range: 2402-2480MHz n
RF output in high power mode: 300mW (25dBm)[3] n
RF output in normal power mode: 100mW (20dBm) n
RF output in low power mode: 50mW (17dBm) or 10mW (10dBm) n
RF modulation: GFSK n
Sensitivity at 0.1%: Packet Error Rate -96dBm n
Tested link range (Normal power mode using standard antennas
in urban area): 500m n
Recovery time upon loss of signal: Less than 1s
[2] CRMX systems are capable of receiving W-DMX data G3 and below, and from G4 systems running in G3 mode.
[3] Allowed in North America only
Voltage 100V
110 - 127V
230V CE
220 - 240V NON CE
277V
347V
Standards
This product conforms to one or more of the above standards.
Please contact your local Cooper Controls representative for further information.
Tel : +44 (0)1633 838088 Fax : +44 (0)1633 867880
E-mail: [email protected]
www.vari-lite.com
E&OE. Cooper Controls reserves the right to make changes to equipment and prices without prior notice. © Cooper Controls Ltd.
ZeroWire CRMX-Rev2-0612
advertisement
Related manuals
advertisement