Siemens WM16Y790AU Instruction manual

en Instruction Manual
and Installation
Instructions
WM16Y790AU
Washing machine
www.siemens-home.com
Your new washing machine
You have chosen a premium washing machine made by
Siemens. Thanks to its innovative technologies, the washing
machine is distinguished by its perfect washing performance and
its economic consumption of water and energy.
Please take a couple of minutes to read and become familiar
with the advantages of your washing machine.
To meet the high quality demands of the Siemens brand, each
washing machine, which leaves our factory, is inspected
thoroughly to ensure that it functions properly and is in perfect
condition.
Further information on our products, accessories, spare parts
and services can be found at: www.siemens-home.com or
contact our customer service centres.
If the instructions for use and assembly describe various models,
reference is made to the differences at the appropriate places.
Explanation of the symbols
ã Warning!
This combination of symbol and signal word indicates a
potentially dangerous situation which may result in death or
serious injuries unless it is avoided.
ã Caution!
This combination of symbol and signal word indicates a
potentially dangerous situation which may result in slight or
minor injuries or damage to property and the environment.
²
Instructions on how best to use the appliance as well as other
useful information.
2
Contents
ucotaniIserMalucotniIsrd
Before washing
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Intended use
Safety instructions
Protection of the environment
The main points in brief
Getting to know your appliance
Detergent drawer
Operating elements/Display elements
4
5
7
8
9
10
11
Operating the appliance
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Before each washing
Washing
After washing
Programme overview
Programme settings/options
Anti-stain system
Consumption values
Appliance settings
Sensors – Your washing machine is so intelligent
12
18
21
22
27
29
30
31
32
Cleaning and maintenance
Ø
Ø
Ø
Ø
Ø
Care and maintenance
Emergency lock release, e.g. if power failure occurs
Information on the display panel
Faults, what to do?
Customer service
33
37
38
39
41
Installing the appliance
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Index
Standard accessories
Installation
Remove transportation protection devices
Connecting the water
Alignment
Electrical connection
Before the 1st washing
Transportation, e.g. if moving house
42
44
47
49
52
53
54
55
56
3
Intended use
erBof waengihs
Ø For use in the household only.
Ø The washing machine is suitable for washing machine-
washable textiles and hand-washable wool in wash liquor.
Ø The washing machine is suitable to be operated with cold
drinking water and commercially available detergents and
care products which are suitable for use in washing
machines.
Ø When dosing all detergents, cleaning aids, cleaning products
and cleaning agents, always follow the manufacturer's
instructions.
Ø The washing machine may be operated by children from 8
years of age, by persons who have limited physical, sensory
or mental abilities and by persons who have inadequate
experience or knowledge, provided they are supervised or
have been instructed by a responsible person.
Ø Keep pets away from the washing machine!
Read and follow the operating and installation instructions and all
other information enclosed with the washing machine.
Retain documents for subsequent use.
4
Safety instructions
ã Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
– Never pull out the mains plug by tugging the power cord.
– Insert/pull out the mains plug with dry hands only.
ã Warning!
Risk to children!
– Do not leave children unsupervised near the washing machine.
– Children must not play with the washing machine.
– This will prevent children from locking themselves in and
suffocating.
On redundant appliances:
– Pull out the mains plug!
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washing-machine door.
– Children must not perform any cleaning or maintenance work
without supervision.
– When playing, children may become entangled in the
packaging/film and packaging parts or pull them over their
heads and suffocate.
Keep packaging, plastic film and packaging parts out of the reach
of children.
– When washing at high temperatures, the glass of the washing
machine door becomes hot.
Prevent children from touching the hot washing machine door.
– Detergents and care products may cause intoxication if
consumed or eye and skin irritation if touched.
Keep detergents and care products out of the reach of children.
ã Warning!
Risk of explosion!
Items of washing pretreated with solvent detergents, e.g. stain
remover/petroleum ether, may cause an explosion when the
washing machine has been loaded.
Before hand thoroughly rinse items of washing by hand.
5
ã Caution!
Danger of scalding!
When washing at high temperatures, you may be scalded if you
touch the hot wash liquor (e.g. if draining hot wash liquor into a
washbasin or if draining the washing machine in an emergency).
Allow detergent solution to cool down.
ã Caution!
Risk of damaging appliance!
– Cover plate may break!
Do not climb on the washing machine.
– Opened washing machine door may break off or washing
machine may overturn!
Do not lean on the open washing machine door.
ã Caution!
Danger when reaching into/gripping the rotating drum!
If you reach into the rotating drum, you may injure your hands.
Do not grip the rotating drum. Wait until the drum stops rotating.
ã Caution!
Risk of coming into contact with liquid detergents/care products!
If the detergent drawer is opened while the washing machine is
running, detergent/care product may spray out.
Caution when opening the detergent drawer.
In case of eye/skin contact, rinse thoroughly.
If accidentally swallowed, seek medical advice.
6
Protection of the environment
Packaging/Old appliance
)
Dispose of packaging in an environmentally friendly manner.
This appliance has been identified in accordance with the
European Directive 2002/96/EG on Waste Electrical and
Electronic Equipment (WEEE).
The Directive specifies the framework for an EU-wide valid return
and recycling of waste appliances.
Hints and tips
Ø Utilise the maximum amount of washing for the particular
programme.
Ø Wash normally soiled washing without Pre-wash.
Ø Instead of Cottons 90 °C programme select Cottons 60 °C
and ecoPerfect ¦ button. Comparable cleaning result with
significantly lower energy consumption.
Ø Energy saving mode: The display panel light goes out after
several minutes, Start/Reload Ü flashes. To activate the
light, select any button.
The energy-saving mode is not activated if a programme is
running.
Ø Automatic switch off: If the appliance is not operated for a
prolonged period, it automatically switches off before the
programme starts and when the programme has ended to
save energy. Switch on by pressing main switch # button.
Ø If the washing is then dried in the tumble dryer, select spin
speed according to the instructions of the dryer
manufacturer.
7
The main points in brief
@
1
Insert mains plug.
Turn the tap on.
2
Sort the washing.
3
@
@
Open the detergent
drawer.
@
Open the washing
machine door.
@
Insert the washing.
@
To switch on, press
the # button.
Dosage: 30%
Please load laundry: max. 8kg
ú
Dose detergent according to dosing
recommendation.
4
If required, change programme settings of the selected programme and
select programme settings/options.
@
v
@
@
FODFN
Close the washing
machine door.
Select Start/
Reload Ü.
Finished, remove washing
End of the programme
8
@
ú
Do not exceed maximum load.
Dosage: 70%
Please load laundry: max. 8kg
5
Select the
programme, e.g.
Cottons.
For switching the
machine on, press
the # button.
Turn off the mains
supply (for models
without Aqua-Stop).
Getting to know your appliance
2SHUDWLQJ
HOHPHQWV
'LVSOD\
HOHPHQWV
'HWHUJHQWGUDZHU
'UXPOLJKW
GHSHQGLQJ
RQPRGHO
'RRU
6HUYLFHIODS
FODFN
2SHQLQJ
DQGFORVLQJWKHGRRU
6HUYLFHIODS
9
Detergent drawer
Dispenser I
Dispenser i
Dispenser II
Dispenser A
Detergent for prewash
Softener, starch. Do not exceed the maximum load.
Detergent for main wash, water softener, bleach, stain
remover
for dosing liquid detergent (not for all models)
For models with insert for liquid detergent:
The detergent drawer features an insert which is used as a dosing aid for liquid detergent.
² Do not use insert:
– For gel-like detergents and washing powders.
– For programmes with Prewash or Ready in option.
Position insert for dosing liquid detergent:
Completely remove detergent drawer.
Push insert forwards.
For models without insert for liquid detergent:
Dose liquid detergent according to the manufacturer’s instructions.
10
Operating elements/Display elements
Q
O
L M
O
N
P
R
ST
² All buttons are sensitive, they only need to be touched gently.
i Switch on and off the appliance. Press
the # main switch button.
j Select a programme. Rotating the in
o Start wash programme. Select
Start/Reload Ü button to start, interrupt
and cancel the programme (e.g. reload
washing).
either direction is possible. Programme
p Change appliance settings. Hold down
Overview, refer to ~ Page 22
Basic Settings 3 sec. button for
appliance settings (end signal, button
Change programme settings of the selected
signal, language, autom. switch off) for
programme and select programme options:
approx. 3 seconds. See Overview of all
k Select Temperature, Spin, Finish in
settings. ~ Page 31
buttons and change. ~ Page 16,
q
Display panel for settings and
~ Page 27
information.
l Select ecoPerfect ¦ or
speedPerfect G button. ~ Page 16,
~ Page 27
m Select ASR Stain Automatic ã button
for stain selection. Overview of all stains
~ Page 29
n Select × Options button for additional
programme options. Overview of all
options ~ Page 27
11
Before each washing
eOpanetlihcpr g
²
– Install and connect washing machine properly. Refer
to ~ Page 44
– Before the 1st wash, wash once without any washing.
~ Page 54
1. Preparing the washing
<;
:98
B A>
AL>
K
WAL
>K
Ž
²
12
Sorting the washing according to:
Type of fabric/fibre.
Colour.
Soiling.
Follow manufacturer’s care information.
Care label specifications:
Ø
Ø
Ø
Ø
Ø
Cottons 95 °C, 90 °C
Coloureds 60 °C, 40 °C, 30 °C
Easy-Care 60 °C, 40 °C, 30 °C
Delicates 40 °C, 30 °C
Hand and machine-washable silk and woollens cold, 40 °C,
30 °C
Do not wash laundry in the washing machine.
Protecting the washing and the machine:
– When dosing all detergents, cleaning aids, cleaning products
and cleaning agents, always follow the manufacturer's
instructions.
– Keep detergents and agents for the pretreatment of washing
(e.g. stain remover, prewash sprays, ...) away from the
surfaces of the washing machine. Using a damp cloth,
immediately remove any fine spray residue and other
residue/droplets.
– Empty pockets.
– Remove metal parts (paper clips, etc.).
– Wash delicates in the net/bag (tights, underwired bras).
– Close zips, button up covers.
– Brush sand out of pockets and collars.
– Remove curtain fittings or include in the net/bag.
– Wash new items separately.
2. Preparing the appliance
Insert mains plug.
Turn on water tap.
3. Selecting a programme and putting the washing in the
drum
1. Open the washing machine door.
2. Check whether the drum has been completely emptied. If
required, empty. Otherwise, the load display may malfunction.
~ Page 32
3. Press the # button. The appliance is switched on.
The Siemens logo is indicated on the display panel and all
programme indicator lamps are lit.
Then always the Cottons programme preset at the factory is
displayed.
Displays for the Cottons programme:
c
c
c
60°C
1400B
2:31h
b
b
b
c
– The indicator lamp is lit on the programme selector and
the main menu for the selected programme is indicated
on the display panel.
– For appliances with drum light:
13
After switching on the appliance, after opening and
closing the washing machine door as well as after starting
the programme, the drum is lit. The light goes out
automatically.
4. Select a programme.
You can use the saved programme
or select another programme, Programme Overview, refer to
~ Page 22,
or select other programmes (see Additional Programs) and
choose one programme as follows:
other programmes selected using Additional Programs and
choose e.g. Outdoor:
30 °C
800 B
Additional programms
1:04h
Drain
Outdoor
Rinse
c
Main menu
è
b
– Select programme using the buttons under the arrows.
The selection is acknowledged by a tick.
– Wait or back by pressing Main menu button, selected
programme is indicated on the display panel.
c
c
c
30°C
800B
1:04h
b
b
b
c
Outdoor
b
– To change the programme, select button under the black
highlighted programme and change programme.
5. Insert the washing.
Dosage: 30%
Please load laundry: max. 8kg
²
14
ú
The load screen for the selected programme (e.g. for Cottons) is
indicated on the display panel. The load screen is indicated when
the door is opened or when the amount of washing is changed.
– Unfold and load presorted items of washing. Mix large and
small items. Washing items of different size distribute
themselves better during the spin cycle. Individual items of
washing may cause imbalances. ~ Page 32
– Do not load washing until the main menu for the saved
programme is displayed after the Siemens logo.
– The load bar progresses as the washing machine is loaded. If
the max. load is exceeded, the bar flashes. Do not exceed
indicated max. load. Overfilling reduces the washing result
and encourages creasing.
4. Add detergent and care product
1. Pull out the detergent drawer.
2. Dosing in dispenser according to:
– Dosing recommendation on the display panel,
e.g. for Cottons:
ú
Dosage: 70%
Please load laundry: max. 8kg
²
Depending on the amount of washing in the washing
machine, a dosing recommendation is indicated on the
display panel.
– Soiling.
– Water hardness (ask your water supply company).
– Manufacturer’s instructions.
– When dosing all detergents, cleaning aids, cleaning products
and cleaning agents, always follow the manufacturer's
instructions.
– Dilute viscous fabric softener and fabric conditioner with
water.
Prevents blockage of the overflow!
5. Changing the settings of the selected programme
²
FODFN
Take care not to trap any items of clothing between the loading
door and rubber seal.
Close the door.
c
c
c
60°C
1400B
2:31h
b
b
b
c
The main menu for the selected programme is indicated again on
the display panel.
15
You can use the displayed presettings or adjust the selected
programme optimally to the items of washing by changing the
presettings or selecting additional settings/options.
Ø Changing the Temperature, Spin, Finish in. Refer to
~ Page 27:
e.g. selecting and changing the Temperature:
c
c
c
1400B
2:31h
b
b
c
70
60°C
50
b
²
The arrows on the display panel indicate which buttons are
used to change the settings. The settings are active without
acknowledgement and are displayed in the main menu.
– If the buttons are held down, the set values automatically run
through.
– The respective programme duration is displayed by selecting
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
Ø ecoPerfect ¦:
for saving energy with a comparable washing effect to the
standard programme. When selected, the display lamp is lit.
Ø speedPerfect G:
for a shorter wash time with a comparable washing effect to
the standard programme. Observe maximum load.
~ Page 22 When selected, the display lamp is lit.
Ø ASR Stain Automatic ã . Overview of all stains ~ Page 29
Do not let stains dry. Remove solid substances beforehand.
Arrange items of washing as usual and load washing
machine. Select the programme. Select a stain type
(depending on the selected programme).
16
Select ASR Stain Automatic ã button and select e.g. grass:
60°C
1400B
ã Stains
2:31h
soil + sand
μ grass
coffee
b
Main menu
μ
è
c
– Select/deselect stain using displayed buttons. Stain option
is immediately active and is indicated on the display
panel.
– Wait or back by pressing Main menu or ASR Stain
Automatic ã button.
Ø ß Options. Overview of all options~ Page 27
Select ß Options and e.g. z Water Plus buttons:
60°C
Extra rinse
zWater Plus
b
1400B
c
2:31h
z
on
è
b
c
– Select option by pressing the two buttons displayed on the
left.
– Select/deselect option by pressing the two buttons
displayed on the right. The selected options are
immediately active.
In the case of multi-level settings keep touching the
buttons to run through the settings automatically.
– Wait or back to the main menu by pressing ß Options
button.
6. Starting the programme
Ø Select Start/Reload Ü. The indicator light is on.
17
Washing
During the wash cycle the programme progress is indicated by a
bar on the display panel. The bar progresses in the course of the
wash cycle and provides information about the current
programme progress.
The arrows are switched on and off according to the programme
progress. They indicate the programme settings/options which
can be changed/added as the programme progresses.
Some programme sequence steps explained:
Ø Load adjust active ~ Page 32
c
60°C
Load adjust active
b
c
1400B
2:31h
c
z
b
Ø Prewash, wash, rinse, spin, drain ... are displayed during the
wash cycle.
Ø Extra rinse: foam~ Page 20
Ø Other displays ~ Page 38
During washing
Ø Childlock
To prevent the set functions of the washing machine from
being accidentally changed, the childproof lock can be
activated.
Activate/deactivate: press Finish in for approx. 5 seconds.
w Childlock has been activated
Display panel goes back to the Main menu after approx.
3 seconds.
If the programme selector is adjusted or a button is selected
while the childproof lock is active, the w symbol flashes
briefly.
18
Ø Topping up washing
When the programme has started, washing can be reloaded
or taken out as required.
Select Start/Reload Ü .
c
60°C
Pause:
²
b
c
1400B
Reload is possible
c
2:31h
b
– If there is a high water level, high temperature or if the drum
is rotating, the washing machine door remains locked for
reasons of safety and reload is not possible. Follow the
information on the display panel. To continue the programme,
select the Start/Reload Ü button. The washing machine
door is locked and the programme continues automatically.
– Load display is not active during relosding.
– Do not leave washing machine door open for a prolonged
period – water could run out of the washing.
Ø Changing the programme sequence
if you have mistakenly started a wrong programme:
1. Select Start/Reload Ü .
2. Select another programme.
3. Select Start/Reload Ü . The new programme starts from
the beginning.
Ø Cancelling the programme
For programmes at high temperature:
1. Select Start/Reload Ü .
2. Cool down washing: select Rinse/Freshen Up
(see Additional Programs).
3. Select Start/Reload Ü .
For programmes at low temperature:
1. Select Start/Reload Ü .
2. Select Spin * or Drain *.
(* see Additional Programs)
3. Select Start/Reload Ü.
19
Ø End of programme by Rinse Hold
Rinse hold reached:
Select "spin" or "drain"
and then "start".
Spin
Drain
b
b
1. Select Spin (If required, adjust the spin speed) or Drain.
2. Select Start/Reload Ü.
End of the programme
Finished, remove washing is indicated on the display panel.
v
²
20
Finished, remove washing
If Foam has been detected is also indicated on the display panel,
the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam.
Dose less detergent in the next wash cycle with the same load.
After washing
1. Open washing machine door and remove washing..
ú
#
²
²
Remove the washing.
Switch off the device.
– Do not leave any items of washing in the drum. In the next
wash they may shrink or discolour something else.
– Remove any foreign objects from the drum and the rubber
seal – risk of rust.
– Leave detergent drawer and door open so that residual water
can evaporate.
Before switching the machine off:
– Always remove the washing. Otherwise, the load display may
malfunction.
– Always wait until the programme ends, as the appliance
could still be locked. Then switch the appliance on and wait
for the unlocking device.
2. Press the # button. Appliance is switched off.
3. Turn off the water tap.
Not required for Aqua-Stop models. ~ Page 60
21
Programme overview
The presettings of the
programmes are highlighted
in bold.
Õ
Programme/Type of washing
Options/information
Name of the programme
Brief explanation of the programme and for
which textiles it is suitable.
max. load
selectable temperature as °C
selectable spin speeds in rpm,
the max. spin speed depends
on the model
possible programme options
for the Less Ironing
programme option possible
spin speeds in rpm
Cottons
Hard-wearing textiles, heat-resistant textiles
made of cotton or linen.
².* reduced load for speedPerfect G
option
max. 8 kg/5 kg *
cold – 40 – 90 °C
0 ... 1200 ... 1600 rpm
¦,G,ã,!,æ,l ,z,$,ç
at æ: 0 ... 800 rpm
Easy-Care
Textiles made of synthetic materials or
blended fabrics.
max. 3.5 kg
cold – 40 – 60 °C
0 ... 1200 rpm
¦,G,ã,!,æ,l ,z,$,ç
at æ: 0 ... 600 ...800 rpm
Mixed Fabrics
Mixed load consisting of textiles made of
cotton and synthetics.
max. 3.5 kg
cold – 40 °C
0 ... 1400 ... 1600 rpm
¦,G,ã,!,æ,l ,z,$,ç
at æ: 0 ... 600 ... 800 rpm
Delicates/Silk
For delicate, washable textiles, e.g. made of
silk, satin, synthetic fibres or blended fabrics
(e.g. silk blouses, silk scarf).
².For machine wash use detergent suitable
for delicates and/or silk.
22
max. 2 kg
cold – 30 – 40 °C
0 ... 600 ... 800 rpm
¦,G,ã,!,æ,l ,z,$,ç
at æ: 0 ... 600 rpm
The presettings of the
programmes are highlighted
in bold.
Programme/Type of washing
Options/information
u Wool
max. 2 kg
Hand or machine-washable wool or rich-wool
textiles.
Especially gentle wash programme to prevent
shrinkage, longer programme pauses
(textiles rest in wash liquor).
cold – 30 – 40 °C
² .Wool is of animal origin, e.g.: angora,
0 ... 800 rpm
$,ç
² .For machine wash use detergent suitable
alpaca, lama, sheep.
for wool.
Low spin
Extra spin cycle at reduced speed and with
especially gentle spin mechanism.
0 ... 800 ... 1200 rpm
æ,ç
at æ: 0 ... 600 rpm
Lingerie
For delicate, washable underwear e.g. made
of velvet, lace, Lycra, silk or satin.
max. 1 kg
cold – 30 – 40 °C
0 ... 600 rpm
¦,G,ã,æ,l ,z,$,ç
at æ: 0 ... 400 rpm
Curtains
3.5 kg heavy curtains or 25 – 30 m² light
curtains.
² .Reduced rinse and final spin cycle.
² .For machine wash use detergent suitable
max. 3.5 kg
cold – 30 – 40 °C
0 ... 400 ... 800 rpm
¦,G,ã,!,l,z ,$,ç
for curtains.
Dark Wash/Jeans
Dark textiles made of cotton and dark easycare textiles.
Wash textiles inside out.
max. 3.5 kg
cold – 30 – 40 °C
0 ... 800 ... 1200 rpm
¦,G,ã,!,æ,l,z ,$,ç
at æ: 0 ... 600 ... 800 rpm
Super Quick 15’
Extra short programme approx. 15 minutes,
suitable for lightly soiled washing as a small
amounts of laundry.
max. 2 kg
cold – 30 – 40 °C
0 ... 800 ... 1200 rpm
$,ç
23
The presettings of the
programmes are highlighted
in bold.
Programme/Type of washing
Options/information
Textileguard
Washing followed by impregnation of
weatherproof and outdoor clothing with
membrane coating and water-resistant
textiles.
max. 1 kg
².Use special detergents suitable for
cold – 30 – 40 °C
0 ... 800 rpm
¦,G,ã,l,z,ç
machine wash. Dosage according to
manufacturer’s instructions.
– Pour into dispenser II special detergent
and
– textile guard agent (max. 170 ml) into
dispenser M .
².The laundry must not be treated with
².Before washing, remove all fabric
fabric softener.
softener residue from detergent drawer (all
dispensers).
Down Wear
Machine-washable textiles filled with down,
pillows, blankets or duvets.
².Wash large items individually. Use mild
detergent. Meter detergent sparingly.
Shirts/Blouses
Non-iron shirts/Blouses made of cotton, linen,
synthetics fibres or blended fabrics.
For the æ Less Ironing option, shirts/
blouses are given a short spin only, hang up
dripping wet. ~ Self-smoothing effect.
².Wash shirts/blouses made of delicates/
silk in Delicates/silk programme.
24
max. 2 kg
cold – 40 – 60 °C
0 ... 1200 rpm
¦,G,ã,l,z,ç
max. 2 kg
cold – 40 – 60 °C
0 ... 800 rpm
¦,G,ã,!,æ,l ,z,$,ç
at æ: 0 ... 400 rpm
... more programmes
The presettings of the programmes are highlighted in
bold.
Programme/Type of washing
Options/information
Outdoor
Weatherproof and outdoor clothing with a
membrane coating and water-resistant
textiles.
max. 2 kg
² Use special detergents suitable for
machine wash. Pour detergent into dispenser II according to manufacturer’s
specifications.
cold - 30 – 40 °C
0 ... 800 rpm
¦,G,ã,æ,l,z,$,ç
at æ: 0 ... 600 rpm
² The laundry must not be treated with
² Before washing, remove all fabric
fabric softener.
softener residue from detergent drawer
(all dispensers).
Rinsing
Extra rinse with spin.
0 ... 1200 ... 1600 rpm
æ,l,z,$,ç
at æ: 0 ... 800 rpm
Spin
Extra spin with selectable spin speed.
0 ... 1200 ... 1600 rpm
æ,ç
at æ: 0 ... 800 rpm
Drain
the rinsing water when Rinse stop $
(without final spin) is actuated.
-
25
Starching
²
The washing should not be treated with fabric softener.
Liquid starch can be used in all wash programmes. Pour starch
into the dispenser M according to manufacturer’s specifications
(if required clean beforehand).
Dyeing/Discolouring
Dye in household quantities only. Salt may attack stainless steel!
Observe specifications of the dye manufacturer! Do not discolour
washing in the washing machine!
Soaking
²
26
Pour soaking agent/detergent into dispenser II according to the
manufacturer’s instructions. Set programme selector to
Cottons 30 °C and select Start/Reload Ü. After approx.
10 minutes select Start/Reload Ü. After the required soaking
time reselect Start/Reload Ü , if the programme is to be
continued or change the programme.
Insert washing of the same colour. No additional detergent
required, the soaking solution is used for washing.
Programme settings/options
²
Depending on the programme, you can use the programme
options to adjust the washing process even more efficiently to
your items of washing.
– Are active without acknowledgement.
– Not retained after appliance is switched off.
– Can be selected or deselected or changed depending on the
programme progress.
Buttons
Notes
Temperature
Spin
Before and during the programme the presettings
can be changed for as long as the arrows are
displayed.
Maximum spin speed depends on the programme
and model.
Finish in
Delays the Finished in time (end of programme).
Before the programme starts, the end of the
programme can be preselected in h steps up to
maximum 24h.
When the programme has started, the preselected
time is displayed e.g. for 8h and counts down until
the wash programme starts. Then the programme
duration is displayed, e.g. 2:30h.
When the programme has started, the preselected
time can be changed as follows:
1. Select Start/Reload Ü.
2. Select Finish in button and change Finish in time.
3. Select Start/Reload Ü.
ecoPerfect ¦
For saving energy.
speedPerfectG
For a shorter wash time.
Anti-stain
system ã
For washing stained laundry.
27
Press ß Options button to select: Notes
Pre-wash
on – off
For heavily soiled washing.
Pour detergent into dispensers I and II.
Less Ironing
on – off
Reduces creasing by special spin sequence followed
by fluffing and reduced spin speed.
².Residual moisture of the washing slightly
increased.
Extra rinse
ö + 1 Rinse
÷ + 2 Rinses
ø + 3 Rinses
Additional rinse cycles depending on the
programme, prolonged programme duration.
Water Plus
on – off
Increased water level, more gentle treatment of the
washing.
Rinse Hold
on – off
The washing remains in the water after the last rinse
cycle. End the programme. ~ Page 20
Silent Wash
on – off
Reduced noise values by special wash and spin
cycle and deactivated end signal. Especially suitable
for washing at night.
².Recommended application: for particularly
sensitive skin or/and in areas with very soft water.
².Residual moisture of the washing slightly
increased.
28
Anti-stain system
General information about stains
A total of 16 different stains can be selected. The washing
machine adjusts the washing temperature, drum movement and
soaking time specific to the type of stain. Hot or cold water, gentle
or intensive washing control and long or short soaking provide
the wash programme with a special sequence for each type of
stain. The result: stains are treated optimally.
The treatment of two stains explained in the following
example
ë blood
í egg
Blood is first “dissolved” in cold water, then the selected wash
programme starts.
Egg particles are removed by soaking in the lukewarm water
bath, selecting a wash cycle with a high water level and running
additional rinse cycles.
For the other stains we have developed comparable solutions in
intensive studies.
Selectable treatment of stains
å baby food
ë blood
í egg
ò strawberry
á soil + sand
ì grass
ä coffee
î cosmetics
ó orange
â red wine
ê chocolate
à sweat
ï dirty socks
ð grease + oil
ñ tea
é tomatoes
29
Consumption values
Programme
Additonal
function
Load
Energy
Water *** Programme
consumption ***
duration ***
Cottons 30 °C *
8 kg
0,33 kWh
58 l
2:17 h
Cottons 40 °C *
8 kg
0,87 kWh
57 l
2:27 h
8 kg
1,47 kWh
57 l
2:27 h
8 kg
0.85 kWh
57 l
3:56 h
Cottons 90 °C
8 kg
2,40 kWh
70 l
2:17 h
Easy-Care 40 °C *
3.5 kg
0,57 kWh
41 l
1:35 h
Mixed Fabrics
40 °C
3.5 kg
0,60 kWh
39 l
0:53 h
Delicates/Silk 30 °C
2 kg
0,15 kWh
34 l
0:43 h
Wool 30 °C
2 kg
0,20 kWh
39 l
0:40 h
Cottons 60 °C *
Cottons 60 °C
*
EcoPerfect **
Programme setting for tests according to currently valid European standard EN60456.
Information about comparability tests: To test the test programmes, wash indicated load
size at maximum spin speed.
** To be used for normally soiled laundry. Programme setting for energy labelling
according to AS/NZS 2040.
*** The values may deviate from the stated values depending on water pressure and
hardness, room temperature, type and amount of laundry, detergents used, fluctuations
in the mains voltage and selected additional functions.
30
Appliance settings
By pressing the Basic Settings 3 sec. buttons, appliance settings
can be changed, e.g. button signal.
Simultaneously hold down Basic Settings 3 sec. buttons for
approx. 3 seconds:
language
end signal
button signal
b
c
off
è
b
c
Ø If the buttons are held down, the settings automatically run
²
through.
Ø Select Setting with the two left buttons.
Ø Select displayed value with the two right buttons (selection
acknowledged by a tick).
Ø Wait or hold down Basic Settings 3 sec. buttons again.
Settings are retained after appliance is switched off.
Settings
Set values
Notes
end signal
off – quiet – medium –
loud – very loud
Adjust volume of the end signal.
button signal
off – quiet – medium –
loud – very loud
Adjust volume of the button signals.
Auto poweroff of the
appliance
in 15 – 30 – 60 min –
never
The appliance automatically switches off after ...
min. (= 0 kWh energy consumption); to switch
on, press main switch button # .
language
German
GB English
...
Change displayed language.
31
Sensors – Your washing machine is so
intelligent
Load adjust
Depending on the type of textile and load, the load adjust
optimally adjusts the water consumption in each programme.
Aqua-Sensor depending on model
During the rinse cycle the Aqua sensor checks the degree
of turbidity (turbidity is caused by dirt and detergent residue)
of the rinsing water. The duration and the number of rinse cycles
depend on the turbidity of the water.
Load sensor/Load display
²
The load sensor detects the load level in the washing machine
when the door is open. This is indicated by a progressing bar on
the display panel.
To ensure that the load sensor measures all the laundry, the drum
must be empty before the washing machine is switched on.
Dosing recommendation
²
The dosing recommendation indicates a recommended
detergent dosage as a %, depending on the selected programme
and the detected load. The indicated % refers to the
recommendation of the detergent manufacturer.
By observing the recommended dosage, you will protect the
environment and reduce your household costs.
Unbalanced load detection system
²
32
The automatic unbalanced load detection system spins the
laundry several times to ensure even distribution.
For reasons of safety the speed is reduced or does not perform
a spin cycle if the washing is very unevenly distributed.
Distribute small and large items of washing in the drum. Faults,
what to do? ~ Page 39
Care and maintenance
gnaCleadmainteaci
ã Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
Switch off the appliance. Pull out the mains plug!
ã Caution!
Fire and explosion hazard!
If solvent cleaning agents, e.g. petroleum ether, are
used in the washing machine, components may be
damaged and toxic fumes generated.
Do not use solvent-based cleaning agents.
ã Caution!
Washing machine may be damaged!
If solvent cleaning agents, e.g. petroleum ether, are
used on the washing machine, the surfaces may be
damaged.
Do not use solvent-based cleaning agents.
Machine housing/Control panel
Ø Remove detergent residue immediately.
Ø Wipe with a soft, damp cloth.
Ø Do not clean the appliance with a water jet.
Drum
Use chlorine-free cleaning agent, not steel wool.
If there is an odour in the washing machine, run Cottons 90 °C
programme. Use standard detergent.
Descaling
Not required if detergent dosed correctly. However, if this does
occur, follow the instructions of the descaling agent
manufacturer. Suitable descalers can be purchased on our
website or from customer service. ~ Page 41
33
Cleaning the detergent drawer
If it contains detergent or fabric softener residue:
1. Pull out, depress insert, take out drawer all the way.
2. Take out insert: using your finger, press insert upwards.
3. Clean detergent dispenser and insert with water and a brush
and dry.
4. Attach insert and lock into position (push cylinder onto guide
pin).
²
5. Insert detergent drawer.
Leave detergent drawer open so that residual water can
evaporate.
Drain pump blocked
ã Warning!
²
Danger of scalding!
Wash liquor is hot when washing at high temperatures.
You may be scalded if you touch the hot wash liquor.
Allow wash liquor to cool down.
Turn the tap off to prevent more water from flowing in and to
ensure that it is drained via the pump.
1. Switch off the device. Pull out the mains plug.
2. Open service flap.
3. Remove service flap.
34
4. Take the drainage hose out of the holder. Remove the
sealing cap, drain water into a suitable receptacle.
Press on sealing cap and insert drainage hose into the
holder.
Note: Residual water may run out.
5. Carefully unscrew the pump cover. Clean the interior, pump
cover thread and pump housing (fan impeller in the
detergent-solution pump must rotate).
6. Reinsert and screw on pump cover. Handle should be
vertical.
7. Insert service flap (1), engage (2) and close (3).
²
To prevent unused detergent from flowing into the outlet during
the next wash cycle: Pour approx. 1 litre of water into dispenser II
and start the Drain programme.
Drainage hose on the siphon blocked
1. Switch off the appliance. Pull out the mains plug!
Note: Residual water may run out!
2. Loosen hose clip, carefully remove drainage hose.
3. Clean drainage hose and siphon spigot.
4. Re-attach drainage hose and secure connection point with
hose clip.
35
Filter blocked in water inlet hose
First, release water pressure in the supply hose:
1. Turn off the tap!
2. Select any programme (except Spin/Drain).
3. Select Start/Reload Ü. Leave programme for approx. 40
seconds.
4. Press the # button. Appliance is switched off. Pull out the
mains plug!
5. Clean the filter:
Disconnect the hose from the water tap.
Clean filter with small brush.
and/or for standard and Aqua-Secure models:
Remove hose from the rear of the appliance.
Take out filter with pliers and clean.
6. Connect the hose and check for leaks.
36
Emergency lock release, e.g. if power
failure occurs
The programme continues running when the power supply is
restored. If the washing is still to be removed, the door can be
opened as described below:
ã Warning!
Danger of scalding!
Wash liquor and washing may be hot. If touched, there
is a risk of scalding.
If required, leave to cool down.
ã Caution!
Danger when reaching into/gripping the rotating drum!
If you reach into the rotating drum, you may injure your
hands.
Do not grip the rotating drum. Wait until the drum stops
rotating.
ã Caution!
Water damage possible!
Leaking water may cause damage.
Do not open the door if you can still see water through
the glass.
1. Switch off the appliance. Pull out the mains plug!
2. Drain the water.
3. Pull down emergency release with a tool and release.
Door can then be opened.
37
Information on the display panel
Display
Cause/Remedy
The door cannot be
locked, please open
the door again, then
close it and select
"start/pause".
– Washing may be caught. Please open and close washing machine door again and select Start/Reload Ü.
– If required, shut washing machine door or remove washing and
shut again.
– If required, switch appliance off and on again; set programme
and make individual settings; start programme.
Please open tap
– Turn on tap fully.
– Supply hose kinked/jammed.
– Water pressure too low. Clean the filter. ~ Page 36
Please clean pump
– Drain pump blocked. Clean the drain pump.
– The water drainage pipe/drain hose is blocked. Clean the drainage hose on the siphon. ~ Page 35
Pause: Reload is not
possible
Water level or temperature is too high.
Select Start/Reload Ü to continue the programme.
Door cannot be unlocked: Water level
or temperature is too
high
Water level or temperature is too high.
Select Start/Reload Ü to continue the programme.
aquaStop has been
activated!
Please call customer
service
not applicable without Aqua-Stop
Water in the base pan, appliance leaking.
Call customer service! ~ Page 41
Auto power-off in ...
seconds,
Appliance automatically switches off after ... seconds if it is not operated for a prolonged period. In order to cancel the programme,
press any button. ~ Page 31
Cooling down the
detergent solution
To protect the wastewater pipes, the hot detergent solution is
cooled before being drained.
Other displays
Error E: XXX
Switch off appliance, wait 5 seconds and switch on again. If the display is indicated again, call customer service. ~ Page 41
38
Faults, what to do?
Faults
Cause/Remedy
Water is running out.
– Correctly attach/replace drainage hose.
– Tighten screw-fitting on the supply hose.
Water not flowing in.
Detergent not
washed in.
–
–
–
–
Washing-machine
door cannot be
opened.
– Safety function active. Stop programme?
– Rinse Hold $ (without final spin) selected?
– Can be opened via emergency release only? ~ Page 37
Programme does
not start.
– Start/Reload Ü or Finish in time selected?
– Door closed?
– Childlock active? Deactivate.
Detergent solution is
not drained.
– Rinse Hold $ (without final spin) selected?
– Clean the drain pump.
– Clean outlet pipe and/or drainage hose.
Water not visible in
the drum.
Not a fault – water below the visible area.
Spin result not satisfactory.
Washing wet/too
damp.
– Not a fault – unbalanced load detection system has stopped the
spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
– Less Ironing æ selected? ~ Page 28
– Too low speed selected? ~ Page 22
Spin cycle actuated
several times.
Not a fault – unbalanced load detection system adjusts imbalance.
Residual water in the
dispenser for care
product.
– Not a fault – effect of the care product not impaired.
– If required, clean insert. ~ Page 34
Odour formation in
the washing machine.
Run Cottons 90 °C programme without washing.
Use standard detergent.
Loud noise formation, vibrations and
“wandering” during
spin cycle.
– Appliance aligned?
Align the appliance. ~ Page 52
– Appliance feet fixed?
Secure appliance feet. ~ Page 52
– Transportation safety devices removed?
Remove transportation protection devices. ~ Page 47
Start/Reload Ü not selected?
Tap not open?
Filter blocked? Clean the filter. ~ Page 36
Supply hose kinked or jammed?
39
Faults
Cause/Remedy
Display panel/indicator lights do not
function while the
appliance is running.
– Power failure?
– Fuse tripped? Switch on/replace fuse.
– If the fault occurs repeatedly, call customer service. ~ Page 41
The programme
takes longer than
usual.
– Not a fault – unbalanced load detection system adjusts imbalance by repeatedly distributing the washing.
– Not a fault – foam detection system active – several rinse cycles
are switched on.
Detergent residue
on the washing.
– Occasionally phosphate-free detergents contain water-insoluble
residue.
– Select Rinsing or brush the laundry after washing.
In the pause status
Start/Reload Ü
flashes very quickly
and a signal sounds.
– Water level too high. Washing cannot be reloaded. Immediately
close washing machine door.
– Select Start/Reload Ü to continue the programme.
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
– Switch off the appliance and pull out the mains plug.
– Turn off the tap and call customer service. ~ Page 41
40
Customer service
If you cannot rectify the fault yourself, Faults, what to
do?~ Page 39, please contact our customer service. We will
always finds a suitable solution to avoid unnecessary visits by
technicians.
Please give customer service the product number (E-Nr.) and the
production number (FD) of the appliance.
(1U
Product number
)'
Production number
These instructions can be
found on: inside of
washing machine door */
open service flap * and
rear of the appliance.
* depending on model
Rely on the competence of the manufacturer.
Contact us. You can therefore be sure that the repair is carried
out by trained service technicians who carry original spare parts.
41
Standard accessories
nethclgIsaipiae
GHSHQGLQJRQPRGHO
$TXD6WRS
6WDQGDUG$TXD6HFXUH
0DLQVFDEOH
:DWHURXWOHW
:DWHULQOHW
,QVWUXFWLRQPDQXDODQG
,QVWDOODWLRQLQVWUXFWLRQV
&RYHUVZLWKKRVHFOLS
(OERZ
IRUVHFXULQJWKH
ZDWHURXWOHWKRVH
6SDQQHU
Also required for connection of the water drainage hose to a
siphon:
1 hose clip Ø 24–40 mm (DIY store) is also required for
connection to a siphon. Connecting the water ~ Page 51
Useful tools:
Ø Spirit level for alignment.
Ø Socket wrench
size 13: for loosening the transportation protection devices
~ Page 47 and
size 17: for aligning the appliance feet. ~ Page 52
42
Hose and cable lengths
GHSHQGLQJRQPRGHO
&RQQHFWLRQRQOHIWVLGH
aFP
aFP
aFPaFP
²
RU
&RQQHFWLRQRQULJKWVLGH
aFP
aFP
aFPaFP
PD[
FP
If the hose holders are used, the possible hose lengths are
reduced!
Available from dealer/customer service:
Ø Extension for Aqua-Stop or cold water inlet hose
(approx. 2.50 m).
Order no. WMZ2380, WZ10130, CZ11350, Z7070X0
Ø Longer supply hose (approx. 2.20 m), for standard model.
Technical specifications
Dimensions
60 x 59 x 85 cm
(width x depth x height)
Weight
depending on modell: 63–83 kg
Mains connection
Nominal voltage 220–240 V, 50 Hz
Nominal current 10 A
Nominal power 2300 W
Water pressure
100–1000 kPa (1–10 bar)
43
Installation
²
Humidity in the drum is caused by the final inspection.
Secure installation
ã Warning!
Risk of injury!
– The washing machine is heavy – caution: take care
when lifting it.
– If the washing machine is raised by protruding
components (e.g. washing machine door), the
components may break off and cause injuries.
Donot lift the washing machine by its projecting
parts.
ã Caution!
Risk of stumbling!
If the hoses and power cord are installed improperly,
there is a risk of tripping and injury.
Lay hoses and cables in such a way that there is no
risk of stumbling.
ã Caution!
²
44
Washing machine may be damaged!
– Frozen hoses may tear/burst.
Do not install the washing machine in an area where
there is a risk of frost or outdoors.
– If the washing machine is raised by protruding
components (e.g. washing machine door), the
components may break off and the washing
machine may be damaged.
Donot lift the washing machine by its projecting
parts.
– In addition to the safety information listed here, the local
water and electricity supplier may have special requirements.
– If in doubt, have the appliance connected by a technician.
ã Warning!
Risk of injury!
– The washing machine is heavy – caution: take care
when lifting it.
– If the washing machine is raised by protruding
components (e.g. washing machine door), the
components may break off and cause injuries.
Do not lift the washing machine by its projecting
parts.
ã Caution!
Risk of stumbling!
If the hoses and power cord are installed incorrectly,
there is a risk of tripping and injury.
Lay hoses and cables in such a way that there is no
risk of stumbling.
ã Caution!
²
Washing machine may be damaged!
– Frozen hoses may tear/burst.
Do not install the washing machine in an area where
there is a risk of frost or outdoors.
– If the washing machine is raised by protruding
components (e.g. washing machine door), the
components may break off and the washing
machine may be damaged.
Do not lift the washing machine by its projecting
parts.
– In addition to the safety information listed here, the local
water and electricity supplier may have special requirements.
– If in doubt, have the appliance connected by a technician.
Installation area
²
Stability is important to prevent the washing machine from
wandering!
– The installation area must be firm and level.
– Soft floors/floor coverings are not suitable.
Installation on a platform with drawer
Platform: order no. WMZ 20490, WZ- 20490
45
Installing the appliance on a base or on a wooden joist
ceiling
ã Warning!
²
Washing machine may be damaged!!
The washing machine may wander during the spin
cycle and topple/fall off the base.
Always secure the washing machine feet with fixing
brackets.
Holding brackets: order no. WMZ 2200, WX 9756,
CZ 110600, Z 7080X0
If installing on a wooden joist ceiling:
– If possible, install the washing machine in a corner.
– Screw a water-resistant wooden panel (min. 30 mm thick) to
the floor.
Appliance installed under/between kitchen units
ã Warning!
²
46
Danger of death from electric shock!
Danger of death if live parts are touched.
The appliance cover plate must not be removed.
– 60 cm cavity width required.
– Install washing machine only under a continuous worktop
connected firmly to the adjacent cupboards.
Remove transportation protection
devices
ã Caution!
Washing machine may be damaged!
Transit bolts which have not been removed may
damage e.g. the drum while the washing machine is
running.
Before using the appliance for the first time, remove
the 4 transportation protection devices completely
and keep in a safe place.
ã Caution!
Washing machine may be damaged!
To prevent damage in transit when transporting the
washing machine subsequently, always re-install the
transit bolts prior to transportation. ~ Page 55
Keep screw and sleeve screwed together.
1. Take the hoses out of the holders.
2. Take hoses out of the elbow and remove elbow.
47
3. Loosen and remove all 4 transportation lock screws.
4. Take the power cord out of the holders. Remove sleeves.
5. Prepare/separate cover.
6. Insert covers.
²
Lock covers firmly by pressing on the locking hook.
7. Insert hose holder.
8. Secure hoses in the hose holders.
48
Connecting the water
ã Warning!
²
Danger of death from electric shock!
Danger of death if live parts are touched.
Do not immerse Aqua-Stop safety device in water
(contains an electric valve).
– To prevent leakage or water damage, follow the instructions
in this chapter!
– Operate the washing machine with cold drinking water only.
– Do not connect to the mixer tap of an unpressurised hotwater apparatus.
– Use only the supplied inlet hose or one purchased from an
authorised specialist outlet, not a used one!
– If in doubt, have the appliance connected by a technician.
Water inlet hose
²
Water inlet hose: do not kink, crush, modify or sever (strength is
no longer guaranteed).
Optimum water pressure in the mains: 100–1000 kPa
(1–10 bar)
Ø When the tap is turned on, the water flow is at least 8 l/min.
Ø If the water pressure is higher, install a pressure reducing
valve.
1. Connect the water supply hose.
ã Warning!
Threads for screw connections may be damaged!
If the screw connections are tightened too tightly using
a tool (pliers), the threads may be damaged.
Tighten plastic screw-fittings by hand only.
to the tap (¾" = 26.4 mm):
PD[
ƒ
PLQPP
PD[
ƒ
Aqua-Stop and Aqua-Secure Standard
49
on the appliance:
for Standard and Aqua-Secure models
2. Carefully turn on the tap and check that the connection points
²
are not leaking.
Screw connection is under water pipe pressure.
Water drainage hose
²
– Do not kink or protract the the water supply hose.
– Height difference between the placement area and drainage
point: 0–maximum 100 cm
Drainage into a wash basin
ã Warning!
Water damage possible!
If the attached drainage hose slips out of the
washbasin due to high water pressure when draining
the washing machine, leaking water may cause
damage.
Secure the drainage hose to prevent it from slipping
out of the sink.
ã Caution!
The appliance may be damaged.
If the end of the drainage hose is immersed in the
drained water, water may be drawn back into the
appliance!
– The plug must not be in the plug hole.
– When the water is being pumped out of the
washing machine, check that the water drains
away quickly enough.
– The end of the drainage hose must not be
immersed in the drained water!
Installing the drainage hose:
50
Drainage into a siphon
ã Warning!
Water damage possible!
If the drainage hose slips off the siphon connection
due to high water pressure when draining the washing
machine, leaking water may cause damage.
Connection point must be secured with hose clip,
Ø 24–40 mm (specialist outlet).
Connecting
Drainage into a plastic pipe with rubber sleeve or into
a gully:
ã Warning!
Water damage possible!
If the drainage hose slips off the plastic pipe due to
high water pressure when draining the washing
machine, leaking water may cause damage.
Secure the drainage hose to prevent it from slipping
out of the sink.
Connecting
51
Alignment
1. Loosen lock nut in a clockwise direction with a wrench.
2. Check alignment of the washing machine with a spirit level
and, if required, correct. Adjust the height by rotating the foot.
²
²
52
All four feet must be firmly on the floor.
The washing machine must not wobble!
3. Tighten the lock nut against the housing.
Grip the foot and do not adjust the height.
– The lock nuts on all four appliance feet must be screwed
tightly against the housing!
– Loud noise formation, intense vibrations and “wandering”
may be due to incorrect alignment!
Electrical connection
Electrical safety
ã Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
– Never pull out the mains plug by tugging the power
cord.
– Insert/pull out the mains plug with dry hands only.
– Never pull out the mains plug during operation.
– Connect the washing machine to an alternating
current via a correctly installed earthed socket only.
– The mains voltage and voltage specifications on
the washing machine (appliance rating plate) must
match.
– Connected load as well as required fuse are
indicated on the appliance rating plate.
Ensure that:
– Mains plug and socket match fit.
– Cable cross-section is adequate.
– Earthing system has been installed correctly.
– A damaged power cord may be replaced by
an electrician only. A replacement mains cable can
be obtained from customer service.
– Do not use multiple plugs/couplings or extension
cables.
– If a residual-current-operated circuit breaker is
used, use only a type which features this symbol:
z.
Only this symbol guarantees compliance with
currently valid regulations.
– The mains plug must be accessible at all times.
53
Before the 1st washing
²
²
²
The washing machine was inspected thoroughly before leaving
the factory. To remove any water left over from testing
procedures, the first washing cycle should be carried out without
laundry in the machine.
The washing machine must have been installed and connected
properly. See chapter Installing ~ Page 52
1. Check the machine.
Never switch on a damaged machine. Inform your customer
service. ~ Page 41
2. Remove protective film from the fascia.
3. Insert mains plug.
4. Turn the tap on.
5. Switch on the appliance.
6. Close the washing machine door. Do not load any washing.
7. Select the Cottons programme.
8. Select the temperature 90 °C.
9. Open the detergent drawer.
10. Pour approx. 1 litre of water (1¾ pt) into dispenser II.
11. Add standard detergent to dispenser II according
to manufacturer’s instructions for light soiling.
To prevent frothing, use only half the recommended amount
of detergent. Do not use any standard or mild detergents.
12. Close the detergent drawer.
13. Select Start/Reload Ü.
14. When the programme ends, switch off the appliance.
Your washing machine is now ready for use.
54
Transportation, e.g. if moving house
Preparatory work
1. Turn off the tap.
2. Release the water pressure in the supply hose. Maintenance
– Filter in the water inlet hose ~ Page 36
3. Drain any residual detergent solution. Maintenance – Drain
pump blocked
4. Isolate the washing machine from the power supply.
5. Remove the hoses.
Installing transportation protection devices
1. Remove covers and keep in a safe place.
If required, use a screwdriver.
2. Insert all 4 sleeves.
²
Clamp mains cable on the holders. Insert and tighten the
bolts.
Before switching on the appliance:
– Remove the transportation protection devices! ~ Page 47
– To prevent unused detergent from flowing into the outlet
during the next wash: Pour 1 litre of water into dispenser II
and start the Drain programme.
55
Index
A
Alignment, 52
Anti-stain system, 27, 29
B
Basic Settings 3 sec., 11
C
Cancelling
the programme, 19
Care, 33
Drum, 33
Machine housing/Control
panel, 33
Changing
the programme, 19
Childlock, 18
Cleaning
the detergent drawer, 34
the filter, 36
the siphon, 35
Connecting the water, 49
Water drainage, 50
Water supply, 49
Consumption values, 30
Customer service, 41
D
Descaling, 33
Detergent drawer, 10
Discolouring, 26
Display panel, 11
Dosing recommendation, 32
Drain pump blocked, 34
Drum light, 13
Dyeing, 26
E
ecoPerfect, 11, 16, 27
Electrical connection, 53
Emergency lock release, 37
End of the programme, 20
Extra rinse, 28
F
Fascia, 11
Faults, what to do?, 39
Finish in, 11, 16, 27
G
Getting to know your
appliance, 9
H
Hints and tips, 7
Hose and cable lengths, 43
I
Information on the display
panel, 38
Inserting the laundry, 15
Insert the laundry, 13
Insert the washing, 14
Installation, 44
Installing transportation
protection devices, 55
Intended use, 4
56
Aqua-Sensor, 32
ASR Stain Automatic, 11, 16
L
Less Ironing, 28
Load adjust, 32
M
Maintenance, 33
O
Old appliance, 7
Options, 11, 17, 27
P
Packaging, 7
Pre-wash, 28
Programme overview, 22
Programme selector, 11
Programme sequence
steps, 18
Programme
settings, 15, 16, 27
Protection of the
environment, 7
Q
Quick-reference instructions, 8
R
Rinse Hold, 20, 28
S
Safety instructions, 5
Select
ASR Stain Automatic, 11
Selecting
the programme, 14
Settings 3 sec., 31
Silent Wash, 28
Soaking, 26
Sorting
the washing, 12, 16
speedPerfect, 11, 16, 27
Spin, 11, 16, 27
Standard accessories, 42
Starching, 26
Start/Reload, 11
Starting
the programme, 17
T
Technical specifications, 43
Temperature, 11, 16, 27
Topping up washing, 19
Transport bolts, 47
U
Unbalanced load detection
system, 32
Unloading
the laundry, 21
W
Water Plus, 28
Load sensor/Load display, 32
57
Aqua-Stop warranty
For appliances with Aqua-Stop only
In addition to warranty claims against the seller based on the contract
of sale and in addition to our appliance warranty we shall pay
damages under the following conditions:
2.
3.
4.
5.
6.
we shall make reparation for the damage with respect to private
users.
The liability warranty applies to the service life of the appliance.
A claim can only be made under the warranty if the appliance and
Aqua-Stop have been correctly installed and connected
according to our instructions; this also includes a correctly
installed Aqua-Stop extension (original accessory).
Our guarantee does not apply to defective cables/hoses or to
fittings up to the connection on the tap.
Appliances which feature Aqua-Stop can be left unattended
during operation and it is not necessary to turn off the tap
afterwards.
The tap should only be turned off if you are away for a prolonged
period, e.g. several weeks holiday.
To book an engineer visit and product advice
GB
0844 8928999
Calls from a BT landline will be charged at
up to 3 pence per minute.
IE
01450 2655
Please find the contact data of all countries in the enclosed customer
service list.
Siemens-Electrogeräte GmbH
Carl-Wery-Str. 34, 81739 München
Germany
9000730942 (9102) 444444
*9000730942*
1. If water damage is caused by a fault in our water safety system,