IOT

GATEWAY

ETHERNET/4G/LTE

Quickstart Guide

CONTENTS

1. DEVICE LIGHT SUMMARY

2. DEVICE DIAGRAM

3. HARDWARE CONFIGURATION i. Device Wiring ii. Powering Device iii. Device Mounting

4. CLOUD ACCESS i. Registering a Customer Account ii. Adding a New User iii. Adding a New Gateway iv. Editing Gateway Configuration

5. ALARM SETUP i. SMS and Email Setup ii. Graph Visualization and data export

6. WIRING DIAGRAM

This quickstart guide provides instructions on initial IoT Gateway set up. For full instruction visit trumeter.com/product/iot and download the user manual.

1. DEVICE LIGHT SUMMARY

Name 4G Gateway

NETWORK

STATUS

Status

2000ms off / 300ms on

300ms off / 300ms on

OFF

ON

1000ms off 1000ms on

No cellular network

Router is initialising

Cellular network is initialising

1500ms off 100ms on

100ms off 100ms on

SIM card error

SEND

RECEIVE

POWER

200ms off 200ms on

500ms off, 500ms on

OFF

ON

Flashing

OFF

ON

Flashing

OFF

ON

Ethernet Gateway

No cable connection

Ethernet link established

DNS error

Getting IP from cellular network

Cellular connection established

No Cloud link

Cloud link established

Sending data

No Cloud link

Cloud link established

Receiving data

No power to device

Device is powered

No Cloud link

Cloud link established

Sending data

No Cloud link

Cloud link established

Receiving data

No power to device

Device is powered

2. DEVICE DIAGRAM

- +

DEVICE

RESET

+ -

9-36VDC - OUT

B

R5485

A

9-36VDC - IN

80mA MAX

1 2 3 4

RS485

COM AI4 AI3 AI2 AI1 COM

ANALOG INPUT - 4-20mA

5

ANALOG INTERFACES

NETWORK

STATUS

DI1 DI2 DI3 DI4 DO1 DO2 DO3 DO4

DIGITAL INTERFACES

SEND

RECEIVE

POWER

7

COM DI1 DI2 DI3 DI4 COM

ANTENNA/

ETHERNET

Dependant on

Model 6

1. DC power supply : 5.5*2.5mm, 9-36V

2. Device Reset : Reset button

3. Power Supply Output : Loop back (directly connected to power supply input terminal)

4. Serial Port : RS485, 5.08mm terminal block plug-in

5. Analog Input : AI1~44 current input detection

6. Antenna : Main antenna

7. Digital Input : DI1~DI4 is 4 way dry/wet node input detection

3. HARDWARE CONFIGURATION i. Device Wiring

1. Wire selected APM meters 4-20ma connections to router

2. Wire selected APM meters digital outputs (for alarm feature) to router

3. Configure meters to ensure alarms are set (APM configurator)

4. Plug multi adaptor into router without power

5. Check all wiring connections are correct

ii. Powering Device

1. Power router by plugging in multi adaptor

2. Check and wait for network connection

3. Confirm Analog Input and Digital Input connection LED’s depending on how many meters connected to router

iii. Device Mounting

1. Attach IoT Router to wall and or cabinet

2. Connect antenna to router via screw terminal

3. Place antenna outside of any metal enclosure to ensure best reception

4. CLOUD ACCESS

To access Trumeter Cloud dashboard, go to cloud.trumeter.com

There are two types of user account:

1. Customer User

2. Read-only User

A Customer User can create and modify parameters within the dashboard including adding and managing gateways and users.

A Read Only user has access to the dashboard and can view and monitor parameters from a gateway.

i. Registering a Customer User Account

1. Go to cloud.trumeter.com

2. Click Sign Up to go to the registration screen

3. Once registered a confirmation email will be sent to the email address used for the account

ii. Adding a New User

1. Go to cloud.trumeter.com

2. Login as Customer User

3. Go to User Groups > Self Registration Users

4. Click on “+” and create new user

5. You can activate the user or send an email with activation link to the email address used for the new account. See full manual for assigning read only permissions

iii. Adding a New Gateway

1. Go to cloud.trumeter.com

2. Open dashboard as Customer User

3. Add unique serial code and model in the “add new gateway”

4. Device will be claimed and added to the list of gateways

iv. Editing Gateway Configuration

1. Go to cloud.trumeter.com

2. Open dashboard as Customer User

3. Click cog on the gateway you want to configure

4. Change configuration and click save when done

5. ALARM SETUP

1. Set APM alarm output thresholds using APM configurator

2. Ensure wiring from APM output to Digital Input on gateway

3. When triggered, alarms will appear on the cloud dashboard assigned to the APM

i. SMS and Email Setup

1. Go to cloud.trumeter.com

2. Login as Customer User

3. Click on the “cog” on the gateway you want to add

SMS or email

4. If you leave it blank it will not send (SMS or Email)

5. If you have made an error when editing, the dashboard will tell you that the message is not being sent

ii. Graph Visualization and Data Export

1. Go to cloud.trumeter.com

2. Open dashboard as Customer User

3. Click on “Export Widget Data” to export in either

CSV, XLS or XLSX

6. WIRING DIAGRAM

PSU

- +

9-36VDC - IN

80mA MAX

DEVICE

RESET

+ -

9-36VDC - OUT

B

R5485

A

TX RX

RS485

COM AI4 AI3 AI2 AI1 COM

ANALOG INPUT - 4-20mA

AI4 AI3 AI2 AI1

ANALOG INTERFACES

NETWORK

STATUS

SEND

DI1 DI2 DI3 DI4 DO1 DO2 DO3 DO4

RECEIVE

POWER

COM DI1 DI2 DI3 DI4 COM

DIGITAL INTERFACES

ANTENNA/

ETHERNET

Dependant on

Model

6. In the Gateway list you can see the number of texts you have left this month ( Txt )

7. If there has been an error in the text and the message is not sent, the text will not be counted

Analog 4-20mA

GND/COM

Digital Alarm

PSU CURRENT VOLTS / FREQ

EXAMPLE APM

Trumeter (Europe)

Trumeter, Pilot Mill, Alfred Street, Bury, Lancashire

BL9 9EF, United Kingdom

Tel: +44 161 674 0960

Email: [email protected]

Trumeter (The Americas)

Trumeter, 6601 Lyons Rd, SUITE H-7, Coconut Creek, Florida,

FL 33073, USA

Tel: +1 954 725 6699

Email: [email protected]

Asia Pacific Distributor

Innovative Design Technologies Sdn. Bhd, Lot 5881, Lorong Iks Bukit Minyak 1

Taman Perindustrian Iks, 14000 Bukit Tengah

Penang, Malaysia

Web: www.idtworld.com

Tel: + 604 5015700

Email: [email protected]

www.trumeter.com

033061-01 Issue 1.0 12/21