ZTE BLADE III User guide

Blade III 快速指南（Virgin）.indd 1

Warranty

This product is warranted for 24 (Twenty Four) months from the date the device was originally purchased.

Please ensure you keep your proof of purchase in a safe place.

The warranty can only be used against presentation of your proof of purchase (receipt).

The warranty is only valid in the United Kingdom.

For batteries and chargers, the warranty period is 6 months from the date of original purchase.

For headsets and other accessories, the warranty period is 3 months from the date of original purchase.

The full ZTE Blade III User Guide can be found at www.ztedevices.co.uk

For support inquiries about ZTE products and services, you should first contact your Retailer or Operator by phone or by visiting their website. For further enquiries, please contact [email protected]

ZTE UK Customer Services can be reached at:

+44203 450 8722

Limitation of Damages

TO THE EXTENT PERMITTED BY APPLICABLE LAW,

THIS LIMITED WARRANTY IS YOUR SOLE AND

EXCLUSIVE REMEDY AGAINST ZTE AND ZTE’S

SOLE AND EXCLUSIVE LIABILITY IN RESPECT OF

DEFECTS IN PRODUCT. HOWEVER, THIS LIMITED

WARRANTY SHALL NOT EXCLUDE OR LIMIT ANY

OF YOUR LEGAL (STATUTORY) RIGHTS UNDER

THE APPLICABLE NATIONAL LAWS.

TO THE EXTENT PERMITTED BY APPLICABLE

LAW, ZTE DOES NOT ASSUME ANY LIABILITY

FOR LOSS OF OR DAMAGE TO OR CORRUPTION

OF DATA, FOR ANY LOSS OF PROFIT, LOSS OF

USE OF PRODUCTS OR FUNCTIONALITY, LOSS

OF BUSINESS, LOSS OF REVENUES OR LOSS

OF ANTICIPATED PROFIT, INCREASED COST OR

EXPENSES OR FOR ANY INDIRECT, OR SPECIAL

OR CONSEQUENTIAL LOSS OR DAMAGE.

TO THE EXTENT PERMITTED BY APPLICABLE

LAW, ZTE’S LIABILITY SHALL BE LIMITED TO THE

PURCHASE VALUE OF THE PRODUCT.

THE ABOVE LIMITATIONS SHALL NOT APPLY

TO DEATH OR PERSONAL INJURY CAUSED BY

DEFECT OF THE PRODUCT IN MATERIAL, DESIGN

AND WORKMANSHIP.

LEGAL INFORMATION

Copyright © 2012 ZTE CORPORATION.

All rights reserved.

No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE

Corporation.

ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.

Version No.: R1.0

Edition Time : 2012.11.30

We offer a SW upgrade tool for our smartphone devices. Please visit ZTE UK at www.ztedevices.co.uk for more information and product support.

For more information, visit www.ztedevices.co.uk and download the user manual.

Product Safety Information

Do not use while re-fuelling.

Do not use hand-held while driving.

This device may produce a bright or flashing light.

For body-worn operation maintain a separation of 15 mm.

Do not dispose of it in a fire.

Avoid contact with magnetic media.

Avoid Extreme Temperatures.

Do not attempt to disassemble.

Switch off when instructed in aircrafts and airports.

Do not rely on this device for emergency communications.

Switch off in explosive environments.

- 1 -

Only use approved accessories.

Getting to Know Your Phone

Power Key

• Press and hold to power your phone on and off, set

Flight Mode or select sounds (silent, vibrate, sound off).

• Press to switch your phone to Sleep mode.

• Press to wake up your phone.

- 2 -

Home Key

• Touch to return to the Home Screen from any application or screen.

• Touch and hold to see recently used applications.

Menu Key

Touch to get the options for the current screen.

Back Key

Touch to go to the previous screen.

Search Key

• Touch to search information on the current screen or application.

• Touch and hold to use Google voice action.

Volume Keys

Press or hold to turn the volume up or down.

Before Getting Started

1. Remove the back cover.

2. Install the SIM card.

- 3 -

2012-12-3 星期一 17:14:10

3. Install the microSD card.

NOTE: microSD logo

Card Association.

4. Install the battery.

is a trademark of the SD

Charging the Battery

When you first get your new phone you’ll need to charge the battery.

1. Connect the adapter to the charger jack.

- 4 -

2. Connect the charger to a standard AC wall outlet.

3. Disconnect the charger when the battery is fully charged.

Powering On/Off

Make sure the SIM card is in your phone and the battery is charged.

• Press and hold the Power Key to turn on your phone.

• To turn it off, press and hold the Power Key to open the options menu. Touch Power off and then touch OK.

Waking Up Your Phone

Your phone automatically goes into sleep mode when it is not in use for some time. The display is turned off to save power and the keys are locked to prevent accidental operations.

You can wake up your phone by turning on the display and unlocking the keys.

1. Press the Power Key to turn the screen on.

2. Touch and hold at the center of the screen.

NOTE: If you have set an unlock pattern, PIN or password for your phone, you’ll need to draw the pattern or enter the PIN/password to unlock.

Using the Touch Screen

Your phone’s touch screen lets you control actions through a variety of touch gestures.

• Touch

When you want to type using the onscreen keyboard, select items onscreen such as application and settings icons, or press onscreen buttons, simply touch them with your finger.

• Touch and Hold

To open the available options for an item (for example, a message or link in a Web page), touch

- 5 and hold the item.

• Swipe or Slide

To swipe or slide means to quickly drag your finger vertically or horizontally across the screen.

• Drag

To drag, press and hold your finger with some pressure before you start to move your finger.

While dragging, do not release your finger until you have reached the target position.

• Pinch

In some apps (such as Maps, Browser, and

Gallery), you can zoom in and out by placing two fingers on the screen at once and pinching them together (to zoom out) or spreading them apart (to zoom in).

• Rotate the screen

For most screens, you can automatically change the screen orientation from portrait to landscape by turning the phone sideways.

EC DECLARATION OF

CONFORMITY

It is hereby declared that following designated product:

Product Type: WCDMA/GSM (GPRS) Dual-Mode

Digital Mobile Phone

Model No: BLADE III

Complies with the essential protection requirements of the Radio and Telecommunication Terminal

Equipment Directive (EC Directive 1999/5/EC) and the

Electromagnetic Compatibility Directive (2004/108/EC).

- 6 -

This declaration applies to all specimens manufactured identical to the samples submitted for testing/ evaluation.

Assessment of compliance of the product with t h e r e q u i r e m e n t s r e l a t i n g t o t h e R a d i o a n d

Telecommunication Terminal Equipment Directive (EC

Directive 1999/5/EC) was performed by American

TCB (Notified Body No.1588), based on the following standards:

Safety EN 60950-1:2006/A11:2009

EMC

Radio

Health

EN 301 489-1 V1.8.1;

EN 301 489-3 V1.4.1;

EN 301 489-7 V1.3.1;

EN 301 489-17 V2.1.1;

EN 301 489-24 V1.5.1;

EN 55013:2001+A2:2006;

EN 55020:2007;

EN 301 511 V9.0.2;

EN 301 908-1 V4.2.1;

EN 301 908-2 V4.2.1;

EN 300 328 V1.7.1;

EN 300 440-1 V1.6.1;

EN 300 440-2 V1.4.1;

EN 50360:2001; EN 62311: 2008

EN 62209-1:2006;

EN 62209-2:2010;

EN 50332-1:2000; EN 50332-2:2003

- 7 -

T h i s d e c l a r a t i o n i s t h e r e s p o n s i b i l i t y o f t h e manufacturer:

ZTE Corporation

ZTE Plaza, Keji Road South, Hi-Tech, Industrial

Park, Nanshan District, Shenzhen, Guangdong,

518057, P.R.China

Authorised person signing for the company:

Xu Feng Quality Director Of ZTE Corporation

Name in block letters & position in the company

Shenzhen, 20 th July 2012

Place & date Legally valid signature

This equipment may be operated in:

CY CZ DK

DE

LT

SK

LI

GR

LU

SI

NO

HU

MT

ES

CH

HR

EE

IE

NL

SE

BG

AT

FI

IT

PL

GB

RO

BE

FR

LV

PT

IS

TR

- 8 -

Blade III 快速指南（Virgin）.indd 2 2012-12-3 星期一 17:14:13