SONNETEER Bronte Instruction manual
Add to my manuals6 Pages
SONNETEER Bronte, the multi-bit Delta Sigma CD player, offers high-fidelity 24/96 Digital to Analogue conversion, with separate power supplies for the CD and the DAC. It features fully programmable playback, various repeat modes, and the ability to create custom track sequences. The front panel display can be dimmed or turned off, and the remote control allows for convenient operation. With its digital output, the Bronte can be connected to a separate D/A converter for future upgradeability.
advertisement
S
onneteer
Brontë
CD Player
Instruction Manual
Mk.V
Introduction
Thank you for purchasing your new Sonneteer
Brontë
, a multi-bit Delta Sigma CD player with digital output (for future upgradeability) which is fully remote controllable. For your safety and proper operation of your CD player, please take time to read this manual fully before installing and operating your system.
Safety notice:
DANGER! HIGH VOLTAGE! RISK OF ELECTRIC SHOCK!
Lethal voltages are present inside the unit. Always unplug the amplifier completely from mains outlet before connecting or disconnecting anything.
No user-serviceable parts inside. Please refer all servicing to qualified service agents.
Never expose the unit to water, moisture, and extreme cold or direct sunlight.
It is advisable to unplug the unit from the mains when a thunderstorm is expected.
Cleaning your CD Player:
Always unplug the unit from mains before cleaning the unit.
Do not use solvents of any kind to clean the unit, only use a soft-dry cloth.
Sonneteer reserves the right to change specifications without prior notice.
This box contains the following:
Remote handset
(with batteries)
CD Player
(with mains cable)
Sonneteer
Brontë
User Manual
Instruction
Manual
Optional Earth Cable
Front panel controls and features:
Front panel buttons CD compartment VFD Display
(see text) Remote Sensor
The new Brontë CD player has the following features:
Hi-Fidelity 24/96 Digital to Analogue converter
Separate power supply for the CD and the DAC
Fully programmable play back features.
Rear Panel connections:
Front panel controls:
Layer (To Select CD/SACD Layer)
>II Play
>>
<<
Next Track
Previous Track
Stop
Open / Close
Power OFF
Mains Power: Main power on/off switch for unit.
AC IN: Connect to mains outlet.
(Do this after all connections to the CD player have been made and checked)
Right Output: Connect this output to your amplifier CD Right Input.
Left Output: Connect this output to your amplifier CD Left Input.
Digi Out: Connect this to your separate D to A converter if required.
Connect optional Earth cable provided. For use in situation when system needs a better Earth connection.
3
5
7
9
10
13
Using your Remote Control:
1
2
4
6
8
9
11
12
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Stand by – Toggles player ON and Stand
by.
Numeric Button – Select Tracks
Sound Mode – Audio Stream Selection (if available)
Audio – Select between CD Layer and
SACD Layer (if available)
Pause – Pause and Resume
Stop – Stops Play, Press twice to Cancel programmed track sequence
Cursor :
Left /Right - Short press will will fast reverse / forward the track slowly, long press will fast reverse / forward quickly.
Press PLAY to cancel the function.
Up/Down – Adjust the display brightness.
Play – Press to Play disc, press again to restart the track.
Previous / Next - Sequential track selection for playback and programming track sequence.
REP – Repeat Track, press again to
Repeat Disc, Press again to Cancel
Repeat.
A/B – Repeat a track between point A to
B. Press once to register point A, press again to register point B, press again to cancel.
TIME – Toggles disc time display mode.
TRACK – Press to start program disc playback sequence. Press TRACK followed by a track number and repeat until all tracks are programmed. Press
PLAY to start.
DISPLAY – Press to dim or switch off player display.
SHUF – To shffle playback sequence.
Note:
If the remote fails to operate the CD player please check the conditions of the batteries and also that the remote sensor has not been obstructed
Technical specification:
Frequency response
Dynamic range
Analogue output level
DAC
Digital output
Size (mm)
Fuse Values:
UK/Europe/Australasia
USA/Canada
2Hz - 20kHz
102dB
2.02V
24bit/96kHz capable
S/PDIF
434 x 74 x 280
230V/240V, T 1.25 Amp
110V/120V, T 2.0 Amp
Sonneteer reserves the right to change specifications without prior notice.
If a fault occurs, please refer to your dealer. Do not attempt to repair the unit yourself.
S
onneteer
P.O. Box 163C, Esher, Surrey, KT10 0YH, England. www.sonneteer.co.uk
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project