Canon Image Runner iRC1028i Specifications

Series
Basic Operation Guide
What Can I Do with This Machine?
Before Using the Machine
Document Handling
Series
Print Media
Sending Documents
Receiving Fax/I-Fax Documents
CANON INC.
Basic Operation Guide
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France
CANON COMMUNICATION & IMAGE FRANCE S.A.S.
Copying
Printing
Scanning
PC Faxing
Remote UI
12, rue de l’Industrie 92414 Courbevoie Cedex, France
System Manager Settings
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
Maintenance
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
Troubleshooting
CANON ITALIA S.p.A.
Via Milano, 8 20097 San Donato Milanese (MI) Italy
Machine Settings
CANON ESPAÑA, S.A.
c/ Joaquín Costa 41, 28002 Madrid, Spain
Appendix
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400, Miami, Florida 33126 U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
ENG
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
FT5-0584 (000)
© CANON INC. 2006
PRINTED IN JAPAN OR CHINA
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
ENG
Manuals for the Machine
● Machine Set-Up
● Software Installation
●
●
●
●
Basic Features
Maintenance
Machine Settings
Specifications
●
●
●
●
Advanced Features
Network and Remote User Interface
System Monitor
Reports and Lists
Quick Start Guide
Basic Operation Guide
(This Document)
Advanced Operation
Guide
CD-ROM
(This manual is provided in print for the
imageRUNNER 1019J.)
● Scanning Features
Scanner Driver Guide
CD-ROM
(This manual is not available for the
imageRUNNER 1019J.)
CD-ROM
Indicates the manual is supplied in PDF format in the accompanying CD-ROM.
● To view the manuals in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe
Reader/Acrobat Reader/Acrobat is not installed on your system, please download it from the Adobe
Systems Incorporated website (http://www.adobe.com).
● Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions.
However, as we are constantly improving our products if you need an exact specification, please
contact Canon.
● The machine illustration on the cover may differ slightly from your machine.
i
Available Features
The procedures described in this manual are based on the imageRUNNER
1023iF. Depending on the system configuration and product purchased, some
features described in the manuals may not be functional. The table below shows
the available features on a product basis.
✔ : available
– : not available
opt. : optional
COPY
PRINT
(UFRII LT)
PRINT
(PCL)
SCAN
FAX
IFAX/
E-MAIL/
FTP/SMB
RUI
(Network
Board)
ADF
imageRUNNER 1019J
✔
–
–
–
–
–
–
–
imageRUNNER 1023
✔
✔
opt.
✔
–
–
opt.
–
imageRUNNER 1023N
✔
✔
opt.
✔
–
–
✔
✔
imageRUNNER
1023iF
✔
✔
opt.
✔
✔
✔
✔
✔
– Optional Card Reader-E1 and Cassette Feeding Module-N1 are available for the
imageRUNNER 1019J/1023/1023N/1023iF.
– Optional Barcode Printing Kit is available for the imageRUNNER 1023/1023N/1023iF.
ii
iii
What Can I Do with This Machine?
What Can I Do with This
Machine?
Sending Features
Send documents with diverse
sending methods
Fax, E-Mail, I-Fax, and File Server
→ Chapter 4
Send documents in a variety of file
formats
Send Settings
→ p. 4-7
Specify a recipient with a single key
Sending with One-Touch Keys
→ p. 4-15
Specify a recipient with a three-digit
code
Sending with Coded Dial Codes
→ p. 4-17
iv
ABC
ABC
ABC
ABC
PDF
TIFF
JPEG
What Can I Do with This Machine?
Specify multiple recipients as a
group
Sending to Group Addresses
→ p. 4-19
Look up a particular recipient
AAAAA
BBBBB
CCCCC
Address Book Search
→ p. 4-21
Specify a recipient with its scan/
send settings
M1
Favorites Buttons
→ p. 4-25
Retry sending documents
automatically
Auto Retry
→ Advanced Operation Guide
v
Send documents to multiple
recipients
What Can I Do with This Machine?
Broadcasting
→ Advanced Operation Guide
Send documents at a specified time
Delayed Sending
→ Advanced Operation Guide
Receive faxes/I-faxes in memory
Memory Reception
→ Advanced Operation Guide
Recall the last three sending jobs
1
Job Recall
→ Advanced Operation Guide
Forward received fax/I-fax
documents
Forwarding Documents
→ Advanced Operation Guide
vi
2
3
Fax Features
What Can I Do with This Machine?
Specify a recipient with a single key
One-Touch Speed Dialing
→ p. 4-15
Specify a recipient with a three-digit
code
Coded Speed Dialing
→ p. 4-17
Specify multiple recipients as a
group
Group Dialing
→ p. 4-19
Look up a particular recipient
AAAAA
BBBBB
CCCCC
Address Book Dialing
→ p. 4-21
vii
Specify a recipient with its scan
settings
What Can I Do with This Machine?
Favorites Buttons
→ p. 4-25
Redial when the line is busy
Automatic Redialing
→ Advanced Operation Guide
Send a fax to multiple recipients
Broadcasting
→ Advanced Operation Guide
Send a fax at a specified time
Delayed Sending
→ Advanced Operation Guide
Receive faxes in memory without
printing out
Memory Reception
→ Advanced Operation Guide
viii
M1
Recall the last three sending jobs
1
Job Recall
3
What Can I Do with This Machine?
→ Advanced Operation Guide
2
Forward received fax documents
Forwarding Documents
→ Advanced Operation Guide
Copy Features
Select a scan mode depending on
the type of image
Image Quality
→ p. 6-3
ABC
ABC
ABC
ABC
Adjust the density level of scanned
images
Density
→ p. 6-4
ix
Enlarge or reduce copied images
A
What Can I Do with This Machine?
Zoom Ratio
→ p. 6-6
Sort copies by page order
Collate Copying
→ Advanced Operation Guide
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
1 AAAA
AAAA
AAAA
1 AAAA
AAAA
AAAA
1
AAAA
1
AAAA
AAAA
BBBB
AAAA
BBBB
CCCC
AAAA
BBBB
CCCC
1DDDD
BBBB
CCCC
DDDD
2
CCCC
DDDD
3
DDDD
4
Make two-sided copies
Two-Sided Copy
→ Advanced Operation Guide
A BC
A BC
A BC
A BC
1
A
D EF
D EF
D EF
D EF
2
DE
D EAB
F C
D E AB
F C
FAB C
AB1 C
Erase shadows and lines in copies
Frame Erase Copy
→ Advanced Operation Guide
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
Copy two documents on one sheet
2 on 1 Combination
→ Advanced Operation Guide
x
D
ABC
D EF
ABC
DEF D EABC
F
ABC
DEF E FABC
ABC
ABC
DEF
1
ABC
1
DEF
2
ABC
ABC
ABC
ABC
1
DE F
DE F
DE F
DE
F
2
System Manager Settings
ID
What Can I Do with This Machine?
Restrict the use of the machine with
department IDs
000001
Department ID Management
→ Advanced Operation Guide
Printer Feature
DE
D EA
FBC
D E FA BC
F A BC
A BC
1
Print a document from a PC
Printing*
→ Online Help
* The optional Barcode Printing Kit is required for the
BarDIMM function.
Scanner Feature
Specify detailed scanning options
to suit various images
Scanning
DE
D EABC
F
D E FABC
F ABC
ABC
1
→ Scanner Driver Guide
xi
What Can I Do with This Machine?
PC Fax Feature
Send a fax from a PC
PC Faxing
→ Online Help
Remote UI Feature
Access and manage the machine
from a PC
Remote UI
→ Advanced Operation Guide
xii
Contents
Manuals for the Machine................................................................. i
Available Features .......................................................................... ii
Sending Features ........................................................... iv
Fax Features...................................................................vii
Copy Features ................................................................ ix
System Manager Settings............................................... xi
Printer Feature................................................................ xi
Scanner Feature ............................................................. xi
PC Fax Feature ..............................................................xii
Remote UI Feature .........................................................xii
Contents ....................................................................................... xiii
Preface........................................................................................... xx
Important Safety Instructions ......................................... xx
Handling and Maintenance ............................................ xx
Location .........................................................................xxi
Power Supply................................................................xxii
How to Use This Guide.............................................................. xxiii
Symbols Used in This Manual ..................................... xxiii
Illustrations Used in This Manual.................................xxiv
Legal Notices .............................................................................. xxv
Copyright ......................................................................xxv
Disclaimers ...................................................................xxv
Legal Limitations on the Usage of Your Product and
the Use of Images........................................................xxvi
Trademarks................................................................. xxvii
FCC (Federal Communications Commission) ........... xxviii
xiii
What Can I Do with This Machine?
What Can I Do with This Machine? .............................................. iv
Users in the U.S.A....................................................................... xxx
Preinstallation Requirements for Canon Facsimile
Equipment.....................................................................xxx
In Case of Equipment Malfunction.............................. xxxii
Rights of the Telephone Company ............................. xxxii
What Can I Do with This Machine?
Users in Canada....................................................................... xxxiii
Preinstallation Requirements for Canon Facsimile
Equipment.................................................................. xxxiii
Notice......................................................................... xxxiv
Utilisation au Canada ............................................................... xxxv
Conditions à Remplir Préalablement à L’installation
d’un Télécopieur Canon..............................................xxxv
Laser Safety ............................................................................ xxxvii
CDRH Regulations ................................................... xxxvii
1 Before Using the Machine ...................................................... 1-1
Machine Components .................................................................1-1
Operation Panel ...........................................................................1-3
Main Operation Panel ...................................................1-3
Send Operation Panel ..................................................1-6
LCD (Standby Mode) ...................................................................1-7
Copy Mode ...................................................................1-7
Send Mode ...................................................................1-7
Scan Mode....................................................................1-7
Toner Cartridge............................................................................1-8
Maintaining the Toner Cartridge ...................................1-8
xiv
Operation Panel Power Switch.................................................1-10
Energy Consumption in the Sleep Mode.................................1-11
Timer Settings............................................................................1-13
2 Document Handling................................................................. 2-1
Document Requirements ............................................................2-1
Scanning Area..............................................................................2-3
Loading Documents ....................................................................2-4
On the Platen Glass......................................................2-4
In the ADF.....................................................................2-6
3 Print Media ............................................................................... 3-1
Paper Requirements....................................................................3-1
Printable Area ..............................................................................3-3
Paper Guidelines .........................................................................3-4
Loading Paper..............................................................................3-5
In the Stack Bypass (e.g., Envelopes)..........................3-5
Setting Paper Type and Size.......................................................3-8
For the Paper Drawer ...................................................3-8
For the Stack Bypass..................................................3-11
xv
What Can I Do with This Machine?
Setting the Sleep Mode ..............................................1-13
Setting Auto Clear Time..............................................1-15
Setting Time Zone ......................................................1-17
Setting Daylight Saving Time......................................1-18
4 Sending Documents................................................................ 4-1
Scan Settings ...............................................................................4-3
What Can I Do with This Machine?
Image Quality................................................................4-3
Density..........................................................................4-5
Two-Sided.....................................................................4-6
Send Settings...............................................................................4-7
Specifying Destinations ............................................................4-11
Using Numeric Keys ...................................................4-12
Using One-Touch Keys...............................................4-15
Using Coded Dial Codes ............................................4-17
Using Group Addresses..............................................4-19
Using Address Book Key ............................................4-21
Using Favorites Buttons..............................................4-25
Storing/Editing Address Book..................................................4-27
Storing/Editing One-Touch Keys/
Coded Dial Codes.......................................................4-27
Storing/Editing Group Addresses ...............................4-40
Manual Sending .........................................................................4-51
Direct Sending ...........................................................................4-54
5 Receiving Fax/I-Fax Documents ............................................ 5-1
6 Copying .................................................................................... 6-1
Scan Settings ...............................................................................6-3
Image Quality................................................................6-3
Density..........................................................................6-4
Zoom Ratio ...................................................................6-6
xvi
7 Printing ..................................................................................... 7-1
8 Scanning .................................................................................. 8-1
9 PC Faxing ................................................................................. 9-1
11 System Manager Settings................................................... 11-1
Department ID Management .....................................................11-1
Procedure before Using the Machine .........................11-1
Procedure after Using the Machine ............................11-2
Optional Card Reader................................................................11-3
Procedure before Using the Machine .........................11-3
Procedure after Using the Machine ............................11-3
12 Maintenance......................................................................... 12-1
Cleaning the Machine................................................................12-1
Exterior .......................................................................12-1
Fuser Roller ................................................................12-2
Scanning area.............................................................12-3
Cleaning the ADF Automatically .................................12-6
Transcription Roller.....................................................12-7
Drum Unit....................................................................12-8
Replacing the Toner Cartridge .................................................12-9
Replacing the Drum Unit.........................................................12-12
Transporting the Machine.......................................................12-14
xvii
What Can I Do with This Machine?
10 Remote UI............................................................................. 10-1
13 Troubleshooting .................................................................. 13-1
Clearing Jams ............................................................................13-1
What Can I Do with This Machine?
Document Jams..........................................................13-1
Paper Jams.................................................................13-3
LCD Messages ...........................................................................13-6
Error Codes ..............................................................................13-12
If a Power Failure Occurs........................................................13-19
Service Call Message ..............................................................13-20
Contacting Your Local Authorized Canon Dealer .....13-20
14 Machine Settings ................................................................. 14-1
Machine Settings .......................................................................14-1
Printing USER’S DATA LIST ......................................14-1
Accessing the Setting Menu .......................................14-3
Setting Menu ..............................................................................14-5
COMMON SETTINGS ...............................................14-5
COPY SETTINGS ....................................................14-10
TX/RX SETTINGS ...................................................14-12
ADDRESS BOOK SET. ...........................................14-21
PRINTER SETTINGS ..............................................14-30
TIMER SETTINGS ...................................................14-34
ADJUST./CLEANING ..............................................14-35
REPORT SETTINGS ...............................................14-38
SYSTEM SETTINGS ...............................................14-40
xviii
15 Appendix .............................................................................. 15-1
Specifications ............................................................................15-1
Index ...........................................................................................15-8
xix
What Can I Do with This Machine?
General .......................................................................15-1
Copier .........................................................................15-3
Printer .........................................................................15-3
Facsimile.....................................................................15-3
Telephone...................................................................15-5
Send Feature ..............................................................15-6
Cassette Feeding Module-N1 (Optional) ....................15-7
Card Reader-E1 (Optional).........................................15-7
Preface
What Can I Do with This Machine?
Thank you for choosing a Canon product. Before using the machine, please read
the following instructions for your safety.
Important Safety Instructions
WARNING
Except as specifically described in this guide, do not attempt to service the machine yourself. Never
attempt to disassemble the machine: opening and removing its interior covers will expose you to
dangerous voltages and other risks. For all service, contact your local authorized Canon dealer.
Handling and Maintenance
–
–
–
–
–
–
–
–
–
Follow all warnings and instructions marked on the machine.
Do not subject the machine to strong physical shocks or vibrations.
Always unplug the machine before moving or cleaning it.
To avoid paper jams, never unplug the power cord, open the left cover, or add or
remove paper in the machine while printing.
Always grip the handle on the sides of the machine when you lift the machine. Never
lift the machine by any of its trays or attachments.
Do not insert any objects into the slots or openings on the machine since they may
touch dangerous voltage points or short out parts. This could result in fire or electric
shock.
Do not allow small objects (such as pins, paper clips, or staples) to fall into the
machine.
To avoid spillage in or around the machine, do not eat or drink near it.
Keep the machine clean. Dust accumulation can prevent the machine from operating
properly.
xx
Location
– Place the machine on a flat, stable, vibration-free surface that is strong enough to
support its weight.
– Place the machine in a cool, dry, clean, well ventilated place.
– Make sure the area is free from dust.
– Make sure the location is not exposed to high temperature or humidity.
– Keep the machine away from direct sunlight as this can damage it. If you have to
place the machine near a window, install heavy curtains or blinds.
– Do not use the machine near water. Make sure that no wet or humid objects come
into contact with the machine.
– Do not use or store the machine outdoors.
– Do not place the machine near devices that contain magnets or generate magnetic
fields, such as speakers.
– If possible, place the machine near an existing telephone line outlet for easy
connection of the telephone line cord, and to avoid the expense of installing a new
outlet.
– Place the machine near a standard 120 V AC (60 Hz) power outlet.
xxi
What Can I Do with This Machine?
– Unplug the machine from the wall outlet and contact your local authorized Canon
dealer in any of the following cases:
– When the power cord or plug is damaged or frayed.
– If liquid or small object has fallen into the machine.
– If the machine has been exposed to rain or water.
– If the machine does not operate normally when you have followed the instructions
in this guide. Adjust only those controls that are covered by the instructions in this
guide. Improper adjustment of other controls may result in damage and may
require extensive work by a qualified technician to restore the product to normal
operation.
– If the machine has been dropped.
– If the machine exhibits a distinct change in performance, indicating a need for
servicing.
What Can I Do with This Machine?
– To ensure reliable operation of the machine and to protect it from overheating (which
can cause it to operate abnormally and create a fire risk), do not block the exhaust
vent. Never block or cover any openings on the machine by placing it on a bed, sofa,
rug, or other similar surface. Do not place the machine in a cupboard or built-in
installation, or near a radiator or other heat source unless proper ventilation is
provided. Leave enough space around all sides of the machine, and make sure that
the clearance between the machine’s ventilation slot and wall or other equipment is
more than 1/4" (5 cm).
– Do not stack boxes or furniture around the power outlet. Keep the area free so you
can reach the outlet quickly. If you notice anything unusual (smoke, strange odors,
noises) around the machine, unplug the power cord immediately. Contact your local
authorized Canon dealer.
– Do not allow anything to rest on the power cord, and do not place the machine where
the cord will be walked on. Make sure the cord is not knotted or kinked.
Power Supply
– During electrical storms, unplug the power cord from the power outlet.
(Please note that any documents stored in the machine’s memory will be deleted
when you unplug the power cord.)
– Whenever you unplug the power cord, wait at least five seconds before you plug it in
again.
– Do not plug the power cord into an uninterruptible power supply (UPS).
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please
move away from this product and consult your doctor.
xxii
How to Use This Guide
Symbols Used in This Manual
WARNING
Indicates a warning that may lead to death or serious injury if not
observed.
CAUTION
Explains how to avoid actions that could injure you or damage your
machine.
NOTE
Explains operating restrictions and how to avoid minor difficulties.
In addition, this guide uses distinctive notations to identify keys and information in the
LCD:
– The keys you press appear in square brackets: [Stop].
– Information in the LCD appears in angle brackets: <STOP KEY PRESSED>.
The numbers that point to the keys on the operation panel diagram correspond to the
order of steps to take in the procedure.
xxiii
What Can I Do with This Machine?
The following symbols are used throughout the manuals for the machine and indicate
the warnings, cautions and notes you should keep in mind when using the machine.
Illustrations Used in This Manual
What Can I Do with This Machine?
Unless otherwise mentioned, illustrations used in this manual are those taken when no
optional equipment is attached to the imageRUNNER 1023iF.
The imageRUNNER 1023iF is used for illustration purposes in this manual.
For information on the standard features and available options for each model, see
“Available Features,” on p. ii.
xxiv
Legal Notices
Copyright
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN,
INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE FOR ANY
DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.
xxv
What Can I Do with This Machine?
Copyright © 2006 by Canon Inc. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise, without the prior written permission
of Canon Inc.
What Can I Do with This Machine?
Legal Limitations on the Usage of Your Product and the
Use of Images
Using your product to scan, print or otherwise reproduce certain documents, and the
use of such images as scanned, printed or otherwise reproduced by your product, may
be prohibited by law and may result in criminal and/or civil liability.
A non-exhaustive list of these documents is set forth below. This list is intended to be a
guide only. If you are uncertain about the legality of using your product to scan, print or
otherwise reproduce any particular document, and/or of the use of the images
scanned, printed or otherwise reproduced, you should consult in advance with your
legal advisor for guidance.
–
–
–
–
Paper Money
Money Orders
Certificates of Deposit
Postage Stamps (canceled or
uncanceled)
– Identifying Badges or Insignias
–
–
–
–
Travelers Checks
Food Stamps
Passports
Immigration Papers
– Selective Service or Draft Papers
– Internal Revenue Stamps (canceled or
uncanceled)
– Bonds or Other Certificates of
Indebtedness
– Stock Certificates
– Checks or Drafts Issued by
Governmental Agencies
– Motor Vehicle Licenses and Certificates – Copyrighted Works/Works of Art
of Title
without Permission of Copyright Owner
xxvi
Trademarks
As an ENERGY STAR Partner, Canon U.S.A., Inc. has determined that
this product meets the ENERGY STAR Program for energy efficiency.
The International ENERGY STAR Office Equipment Program is an
international program that promotes energy saving through the use of
computers and other office equipment.
The program backs the development and dissemination of products
with functions that effectively reduce energy consumption. It is an
open system in which business proprietors can participate voluntarily.
The targeted products are office equipment, such as computers,
displays, printers, facsimiles, and copiers. The standards and logos
are uniform among participating nations.
xxvii
What Can I Do with This Machine?
Canon, the Canon logo, and imageRUNNER are registered trademarks of Canon Inc.
in the United States and may also be trademarks or registered trademarks in other
countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the
United States and other countries.
Other product and company names herein may be the trademarks of their respective
owners.
FCC (Federal Communications Commission)
What Can I Do with This Machine?
imageRUNNER 1019J: Model F189204
imageRUNNER 1023/1023N: Model F189200
imageRUNNER 1023iF: Model F189202
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cables is required to comply with Class B limits in Subpart B of Part 15 of
the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in
this manual. If you make such changes or modifications, you could be required to stop
operation of the equipment.
xxviii
If your equipment malfunctions, please contact your local authorized Canon dealer from
whom you purchased the equipment (if under warranty), or with whom you have a
servicing contact. If you are not sure who to contact, and have both purchased and are
using the equipment in the U.S.A., please refer to the “SUPPORT” page on Canon USA’s
Web site (http://www.usa.canon.com).
What Can I Do with This Machine?
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. (516) 328-5600
xxix
What Can I Do with This Machine?
Users in the U.S.A.
Preinstallation Requirements for Canon Facsimile
Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 14, “Appendix,” for
specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used.
2. Order an RJ11-C telephone wall jack (USOC), which should be installed by the
telephone company. If the RJ11-C wall jack is not present, telephone/facsimile
operation is not possible.
3. Order a normal business line from your telephone company’s business representative.
The line should be a regular voice grade line or an equivalent one. Use one line per
unit.
DDD (Direct Distance Dial) line
-orIDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Canon recommends an individual line following industry standards, i.e., 2,500 (touch-tone) or 500
(rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch eXchange) unit
without “Call Waiting” can be used with your facsimile unit. Key telephone systems are not
recommended because they send nonstandard signals to individual telephones for ringing and
special codes, which may cause a facsimile error.
xxx
C. Power Requirements
The machine should be connected to a standard 120 volt AC, three-wire grounded outlet
only.
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the rear panel of this equipment is a label that contains, among other
information, a product identifier in the format of US:AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
The REN (Ringer Equivalence Number) is used to determine the number of devices
that may be connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most, but not all
areas, the sum of the RENs should not exceed five (5.0). To be certain of the number
of devices that may be connected to a line, as determined by the total RENs, contact
the local telephone company. The REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 10 is a REN of 1.0).
An FCC compliant telephone line cable and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network or
premise wiring using a compatible modular jack that is Part 68 compliant.
This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subjected to state tariffs.
xxxi
What Can I Do with This Machine?
Do not connect this machine to an outlet or power line shared with other appliances that
cause “electrical noise.” Air conditioners, electric typewriters, copiers, and machines of this
sort generate electrical noise that often interferes with communications equipment and the
sending and receiving of documents.
What Can I Do with This Machine?
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described
in this guide or the Advanced Operation Guide, disconnect the equipment from the
telephone line cable and disconnect the power cord. The telephone line cable should
not be reconnected or the main power switch turned ON until the problem is completely
resolved. Users should contact their local authorized Canon Facsimile Service Dealer
for the servicing of equipment.
If your equipment malfunctions, please contact your local authorized Canon dealer
from whom you purchased the equipment (if under warranty), or with whom you have a
servicing contract. If you are not sure who to contact, and have both purchased and
are using the equipment in the U.S.A., please refer to the “SUPPORT” page on Canon
U.S.A.’s Web site (http://www.usa.canon.com).
Rights of the Telephone Company
If this equipment (imageRUNNER 1023iF) causes harm to the telephone network, the
telephone company may temporarily disconnect service. The telephone company also
retains the right to make changes in facilities and services that may affect the operation
of this equipment. When such changes are necessary, the telephone company is
required to give adequate prior notice to the user. However, if advance notice is not
possible, the telephone company will notify the customer as soon as possible. Also, the
customer will be advised of his/her right to file a complaint with the FCC if he/she
believes it is necessary.
WARNING
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or
other electronic device to send any message via a telephone facsimile machine unless such message
clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the
transmission, the date and time it is sent and an identification of the business or other entity, or other
individual sending the message and the telephone number of the sending machine or such business,
other entity, or individual.
NOTE
In order to program this information into your machine, complete the procedure for registering your name,
unit’s telephone number, time, and date in the Quick Start Guide.
xxxii
Users in Canada
A. Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 15, “Appendix,” for
specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used.
2. Order a CA11A modular jack, which should be installed by the telephone company. If
the CA11A jack is not present, installation cannot occur.
3. Order a normal business line from your telephone company’s business representative.
The line should be a regular voice grade line or an equivalent one. Use one line per
unit.
DDD (Direct Distance Dial) line
-orIDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Canon recommends an individual line following industry standards, i.e., 2,500 (touch-tone) or 500
(rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch eXchange) unit
without “Call Waiting” can be used with your facsimile unit. Key telephone systems are not
recommended because they send nonstandard signals to individual telephones for ringing and
special codes, which may cause a facsimile error.
C. Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex).
It should be independent from copiers, heaters, air conditioners, or any electric equipment
that is thermostatically controlled. The rated value is 115 volts and 15 amperes. The
CA11A modular jack should be relatively close to the power outlet to facilitate installation.
xxxiii
What Can I Do with This Machine?
Preinstallation Requirements for Canon Facsimile
Equipment
What Can I Do with This Machine?
Notice
● This product meets the applicable Industry Canada technical specifications.
● The Ringer Equivalence Number is an indication of the maximum number of devices
allowed to be connected to a telephone interface. The termination of an interface
may consist of any combination of devices subject only to the requirement that the
sum of the RENs of all the devices does not exceed five.
● The REN of this product is 1.0.
● Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. In some cases,
the company’s inside wiring associated with a single line individual service may be
extended by means of a certified connector assembly (telephone extension cord).
The customer should be aware that compliance with the above conditions may not
prevent deterioration of service in some situations.
● Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made by
the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
● Users should ensure for their own protection that the electrical ground connections
of the power utility, telephone lines, and internal metallic water pipe system, if
present, are connected together. This precaution may be particularly important in
rural areas.
CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate
electric inspection authority, or electrician, as appropriate.
NOTE
This equipment complies with the Canadian ICES-003 Class B limits.
xxxiv
Utilisation au Canada
A. Emplacement
Prévoir une table, un meuble, ou un bureau suffisamment solide et de taille appropriée
(voir le chapitre 14, Annexe (Appendix), pour les indications de poids et dimensions).
B. Installation téléphonique
1. Une seule ligne téléphonique (tonalités ou impulsions) doit être utilisée.
2. Il faut commander un jack modulaire CA11A qui sera installé par la compagnie
téléphonique. Sans ce jack, la mise en place serait impossible.
3. Si vous vous abonnez à une nouvelle ligne, demandez une ligne d’affaires normale de
qualité téléphonique courante ou équivalente. Prenez un abonnement d’une ligne par
appareil.
Ligne automatique interurbaine
ou
Ligne automatique internationale
(si vous communiquez avec les pays étrangers)
NOTE
Canon vous conseille d’utiliser une ligne individuelle conforme aux normes industrielles, à savoir:
ligne téléphonique 2,500 (pour appareil à clavier) ou 500 (pour appareil à cadran/impulsions). Il est
également possible de raccorder ce télécopieur à un système téléphonique à poussoirs car la
plupart de ces systèmes émettent des signaux d’appel non normalisés ou des codes spéciaux qui
risquent de perturber le fonctionnement du télécopieur.
C. Condition d’alimentation
Raccordez le télécopieur à une prise de courant plus terre à trois branches, du type simple
ou double, et qui ne sert pas à alimenter un copieur, un appareil de chauffage, un
climatiseur ou tout autre appareil électrique à thermostat. L’alimentation doit être de
115 volts et 15 ampères. Pour faciliter l’installation, le jack CA11A doit être assez proche
de la prise de courant.
xxxv
What Can I Do with This Machine?
Conditions à Remplir Préalablement à L’installation
d’un Télécopieur Canon
What Can I Do with This Machine?
Remarques
● Le présent matériel est conforme aux spécifications techniques applicables
d’Industrie Canada.
● Avant d’installer cet appareil, l’utilisateur doit s’assurer qu’il est permis de le
connecter à l’équipement de la compagnie de télécommunication locale et doit
installer cet appareil en utilisant une méthode de connexion autorisée. Il se peut qu’il
faille étendre la circuiterie intérieure de la ligne individuelle d’abonné, qui a été
installée par la compagnie, au moyen d’un jeu de connecteurs homologués (rallonge
téléphonique).
● L’attention de l’utilisateur est attirée sur le fait que le respect des conditions
mentionnées ci-dessus ne constitue pas une garantie contre les dégradations de
qualité du service dans certaines circonstances.
● L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de
terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison
d’une interface peut consister en une combinaison quelconque de dispositifs, à la
seule condition que la somme d’indices d’équivalence de la sonnerie de tous les
dispositifs n’excède pas 5.
● Le nombre d’équivalents sonnerie (REN) de ce produit est 1,0.
● Les réparations sur un appareil certifié doivent être faites par une société d’entretien
canadienne autorisée par le Gouvernement canadien et désignée par le fournisseur.
Toute réparation ou modification que pourrait faire I’utilisateur de cet appareil, ou
tout mauvais fonctionnement, donne à la compagnie de télécommunication le droit
de débrancher I’appareil.
● Pour sa propre protection, I’utilisateur doit s’assurer que les prises de terre de
I’appareil d’alimentation, les lignes téléphoniques et les tuyaux métalliques internes,
s’il y en a, sont bien connectés entre eux. Cette précaution est particulièrement
importante dans les zones rurales.
CAUTION
Au lieu d’essayer de faire ces branchements eux-mêmes, les utilisateurs sont invités à faire appel à un
service d’inspection faisant autorité en matière d’électricité ou à un électricien, selon le cas.
NOTE
Respecte les limites de la classe B de la NMB-003 du Canada.
xxxvi
Laser Safety
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.
CAUTION
Use of controls, adjustments, or performance of procedures other than those specified in this manual may
result in hazardous radiation exposure.
The label is attached to the laser scanner machine inside the machine and is not in a
user access area.
xxxvii
What Can I Do with This Machine?
This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser
product under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act of
1968. This means that the machine does not produce hazardous radiation.
Since radiation emitted inside the machine is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine during
any phase of user operation.
Before Using the
Machine
Before Using the Machine
Machine Components
A
A
B
C
D
ADF (Automatic Document Feeder)
Holds documents and feeds them
automatically into the scanning area.
E
B
Slide guides
Adjusts to the width of the document.
C
Document feeder tray
Holds documents.
D
Document delivery tray
Receives documents.
E
Paper delivery tray
Receives copies, prints and faxes.
F
I
H
Prevents the paper from falling off the paper
delivery tray.
Open the stopper from its original position for
A4/LTR size paper. For LGL size paper, pull
out the extension first, and then open the
stopper.
G
F
J
Paper stopper
G
Operation panel
Machine controls.
H
Paper drawer
Holds the paper supply.
I
Stacking support
Helps prevent paper curl on the output tray.
Open as far as it goes when using curl-prone
paper.
J
Platen glass cover
Open this cover when placing a document on
the platen glass.
1-1
K
K L
M
N
Left cover
L
Scanning area
Scans documents from the ADF.
M
Platen glass
Place documents.
N
Front cover
Open this cover to replace the toner bottle.
O
Stack Bypass
Feeds non-standard size or thick/thin type
paper stacks.
P
Slide guides for stack bypass
Adjusts to the width of the paper.
Q
Stack bypass extension
Pull out to load paper stack.
Q
P
O
R
R
USB port
Connect the USB (Universal Serial Bus)
cable.
S
S
Ethernet port
Connect the network cable.
T
Telephone line jack
Connect the external telephone cable.
U
External device jack
Connect an external device.
V
Power socket
Connect the power cord.
W
Main power switch
Turns the power on or off.
W
V
U T
Machine components vary depending on the model
you purchased. For information on the standard
features and available options for each model, see
“Available Features,” on p. ii.
1-2
Before Using the Machine
Open this cover when replacing the drum unit
or clearing paper jams.
Operation Panel
Main Operation Panel
Before Using the Machine
● imageRUNNER 1023iF
A
D E F
B C
COPY
ed
l
Address
Book
4
M4
G H
SEND
I J
K
L
M
View
Settings
ABC
@./
1
Reset
GHI
Collate
2
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
MNO
S
ON/OFF
C
ID
Stop
Start
WXYZ
TUV
7
Counter
Check
Log In/Out
6
5
PQRS
Clear
3
JKL
4
Paper
Select
QR
SCAN
System
Monitor
8
N OP
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
f
A
e
d
c
b a Z Y X W
Paper Select indicator
Indicates the selected paper source.
* The number of paper sources varies
depending on the model used.
B
D
COPY key
Press to switch to the Copy mode.
E
key
Press to decrease the value for various
settings. Also press to see the previous item
in the menu.
1-3
G
T
SEND key
OK key
Press to determine the contents you set or
register.
H
LCD display
Displays messages and prompts during
operation. Displays selection, text, and
numbers when adjusting the settings.
U
Press to switch to the Send mode.
Jam Location indicator
Indicates the location of paper jams.
C
F
V
SCAN key
Press to switch to the Scan mode.
I
key
Press to increase the value for various
settings. Also press to see the next item in
the menu.
J
Reset key
U
Press to return the machine to the standby
mode.
K
System Monitor key
Flashes or lights up when an error has
occurred.
V
Press to check fax transmission, print, copy,
or report output status.
L
View Settings key
W
O
Press to clear entered alphanumeric
characters.
Y
Log In/Out key
Z
Start key
Counter Check key
Press to display counter status. (Press again
to close counter status.)
R
a
Press to turn the operation panel on/off. Also
press to enter the Sleep mode or to resume
the normal mode from the Sleep mode
manually.
T
Additional Functions key
Press to select or cancel modes in Additional
Functions.
b
Two-Sided key
Press to set two-sided copying or sending
documents.
c
Copy Ratio key
Press to enlarge or reduce copy ratio.
d
Density key
Press to lighten or darken the copies or
documents you send.
Stop key
ON/OFF key (operation panel power
switch)
Collate key
Press to set collate copying.
Press to cancel machine operations.
S
Frame Erase key
Press to set frame erase for copying.
Press to start copying, scanning and sending
faxes.
Q
2 on 1 key
Press to set 2 on 1 copying.
Clear key
Press to operate the machine when the
department ID management is activated.
Also press to enable the department ID
management when you finished using the
machine.
P
X
Before Using the Machine
N
Tone key
Press to switch from rotary pulse to tone
dialing.
Numeric keys
Enter letters and numbers.
Processing/Data indicator
Flashes when the machine is working. Lights
up when the machine has waiting jobs.
Press to confirm settings of the copy function.
M
Error indicator
e
Image Quality key
Press to select image quality for copying and
sending documents.
f
Paper Select key
Press to select a paper source (paper drawer
or stack bypass).
Power indicator
Lights up when the main power is turned on.
1-4
● imageRUNNER 1023N
A
B
C
D
E
G
COPY
H
I J
K
L
View
Settings
Reset
Before Using the Machine
Density
Copy Ratio
e
d
c
Counter
Check
Clear
1
2
3
4
5
6
7
8
9
0
#
ON/OFF
C
Collate
Additional
Functions
OK
Image Quality
f
S
QR
SCAN
System
Monitor
Paper
Select
N OP
M
Stop
Log In/Out
Start
ID
2 on 1
Frame Erase
Two-Sided
Processing/
Data Error Power
b a Z Y X
V
U
T
● imageRUNNER 1023
A
B
C
D
E
G
COPY
H
I J
K
L
View
Settings
Reset
S
QR
Density
Copy Ratio
e
d
c
Two-Sided
Counter
Check
Clear
1
2
3
4
5
6
7
8
9
0
#
ON/OFF
C
Collate
Additional
Functions
OK
Image Quality
f
N OP
SCAN
System
Monitor
Paper
Select
M
Stop
Log In/Out
Start
ID
2 on 1
Frame Erase
Processing/
Data Error Power
b a Z Y X
V
U
T
● imageRUNNER 1019J
A
B
C
E
G
I J
K
System
Monitor
f
1-5
Image Quality
Density
Copy Ratio
e
d
c
Two-Sided
N OP
Clear
1
2
3
4
5
6
7
8
9
0
#
Collate
Additional
Functions
OK
M
View
Settings
Reset
Paper
Select
L
QR
Counter
Check
ON/OFF
C
Stop
Log In/Out
ID
Start
2 on 1
Frame Erase
b a Z Y X
Processing/
Data Error Power
V
U
T
S
Send Operation Panel
A
B
C
D
E
F
CO
Panel open
Direct TX Pause
Recall
15
16
01
17
18
19
20
05
06
07
08
21
22
23
09
10
11
12
M3
04
Address
Book
M4
Delayed TX
G
A
I
Direct TX key
H
F
Press to set Direct Sending.
B
Pause key
Hook key
G
Recall key
Press to recall previously set send jobs,
including the destinations, scan settings, and
send settings.
E
Coded Dial key
G
Address Book key
One-Touch keys
Press to specify destinations registered
under one-touch keys.
Press when you want to dial without lifting the
handset of the external telephone.
D
Image Quality
Press to search preregistered destinations
under one-touch keys or coded dial codes by
name, number, or address.
Inserts a pause when entering a fax number.
C
Paper
Select
H
Favorites buttons
Press to specify destinations registered
under favorites buttons.
I
Delayed TX key
Press to set Delayed Sending.
Press to specify destinations registered
under coded dial codes.
1-6
Before Using the Machine
14
M2
03
Coded
Dial
13
M1
02
Hook
LCD (Standby Mode)
Before Using the Machine
Copy Mode
● Without optional paper
drawer
A
B
100%
A
TEXT
LTR
D
E
● With optional paper drawer
A
O1
100%
A
D
A
Zoom ratio
B
Paper size
C
Quantity
D
Density
E
Image quality
1-7
SEND
AUTO
TEXT
E
Scan Mode
Send Mode
SELECT
FAX
C
B
C
METHOD
SCANNING
MODE
O1
Toner Cartridge
If a message prompting you to replace the toner cartridge appears on the LCD
display, replace the toner cartridge with a new one.
Use only the toner cartridges recommended for use with this machine.
Before Using the Machine
WARNING
• Never dispose toner cartridges in a fire or incinerator, as this may result in an explosion.
• Do not store toner cartridges in places exposed to open flames, as this may cause the toner to ignite
and result in burns or a fire.
CAUTION
– Keep toner and other consumables out of the reach of small children. If these items are ingested,
consult a physician immediately.
– When removing a used toner cartridge, remove the toner cartridge carefully to prevent the toner from
scattering and getting into your eyes or mouth. If the toner gets into your eyes or mouth, wash them
immediately with cold water and immediately consult a physician.
– When discarding used toner cartridges, put the cartridges into a case to prevent the toner remaining
inside the cartridges from scattering, and dispose of them in a location away from open flames.
Maintaining the Toner Cartridge
● Store toner cartridges in a cool location, away from direct sunlight.
– The recommended storage conditions are: temperature below 86 °F (30 °C), and
humidity below 80%.
● Never store the cartridges in a vertical position.
1-8
■ Genuine Supplies
Before Using the Machine
Canon has developed and manufactured Toner, Parts, and Supplies specifically for use in this
machine. For optimal print quality and for optimal machine performance and productivity, we
recommend that you use Genuine Canon Toner, Parts, and Supplies.
Contact your Canon Authorized Dealer or Service Provider for Genuine Canon Supplies.
1-9
Operation Panel Power Switch
To turn the operation panel ON or OFF, press the operation panel power switch. When
turned OFF, the machine is in the Sleep mode.
Machine Status
ON
Standby mode (ready for immediate copying
or printing)
OFF
Sleep mode
NOTE
– The machine can receive and print documents from a personal computer when it is in the Sleep mode.
I-fax/fax documents can also be received while the machine is in the Sleep mode.
– The energy consumption while the machine is in the Sleep mode can be set in the Additional Functions
menu. (See “Energy Consumption in the Sleep Mode,” on p. 1-11, and “Setting Menu,” on p. 14-5.)
– The length of time taken by the machine to enter the Sleep mode can be set in the Additional Functions
menu. (See “Setting the Sleep Mode,” on p. 1-13, and “Setting Menu,” on p. 14-5.)
– The machine will not enter the Sleep mode if it is scanning or printing.
– The machine may not enter the Sleep mode completely depending on certain conditions. (For more
information, see “Energy Consumption in the Sleep Mode,” on p. 1-11.)
– Turn the operation panel power switch OFF when not using the machine for a prolonged period of time,
for example, at night.
1-10
Before Using the Machine
Operation Panel Power Switch
Energy Consumption in the Sleep Mode
Before Using the Machine
You can set the amount of energy that the machine consumes when it is in the Sleep
mode. If you set the power consumption to <LOW>, the machine consumes less
energy during the Sleep mode than when you set it to <HIGH>. However, it takes more
time for the machine to resume normal operation.
1
2
3
4
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
4
5
1-11
Press [Additional Functions].
Press [
] or [
] to select <COMMON SETTINGS>, then press [OK].
Press [
] or [
] to select <ENERGY IN SLEEP>, then press [OK].
Press [
] or [
] to select <HIGH> or <LOW>, then press [OK].
Press [Stop] to retrun to the standby mode.
5
NOTE
SYSTEM SETTINGS
COMMUNICATION
MEMORY LOCK
MEMORY RX TM is set to
ON*.
NETWORK SETTINGS
TCP/IP SETTINGS
SMB SETTINGS
DHCP is set to ON.
USE SMB CLIENT is set
to ON.
POP INTERVAL is set to
more than 1MIN.
E-MAIL/I-FAX
*
If there is more time than specified in <AUTO SLEEP TIME> remaining before the set time limit is
reached, the machine consumes the same amount of energy as when the energy consumption level is
set to <LOW>.
– The default setting is <LOW>.
– For information on each setting, see Chapter 1, “Advanced Send Features” or Chapter 3, “Network” in
the Advanced Operation Guide.
1-12
Before Using the Machine
– If there is less time than specified in <AUTO SLEEP TIME> remaining before sending a job which has
been reserved for delayed sending, the machine will not enter the Sleep mode completely.
– If you are using a management application (such as NetSpot Console) to view or manage the settings
and status of the machine via the network, the machine may not enter the Sleep mode completely.
– If you are using the machine as a Windows printer, the machine may not enter the Sleep mode
completely if SNMP Status is enabled for your operating system (unless your computer is turned OFF).
For more information on disabling SNMP Status, contact your network administrator.
– In some cases, the energy consumption level in the Sleep mode is <HIGH> even when the energy
consumption level is set to <LOW>, such as when:
• A job is being processed (including a forwarding job, report job, receive job, and sending a forwarding
done notice).
• Any of the following settings are set in the Additional Functions menu:
Timer Settings
Before Using the Machine
Setting the Sleep Mode
When the machine remains idle for a certain period of time, it automatically enters the
Sleep mode.
1
2
3
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
1-13
Press [Additional Functions].
Press [
] or [
] to select <TIMER SETTINGS>, then press [OK].
Press [
] or [
] to select <AUTO SLEEP TIME>, then press [OK].
COPY
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
2
JKL
GHI
Collate
4
Paper
Select
08
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
ID
6
Stop
Log In/Out
6
5
Start
WXYZ
TUV
7
Clear
8
Before Using the Machine
4
5
ded
al
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
4
5
Confirm that <ON> is displayed, then press [OK].
Press [
] or [
] to select the desired interval, then press [OK].
You can set the interval from 3 to 30 minutes (in one-minute increments).
You can also enter values using numeric keys.
6
Press [Stop] to return to the standby mode.
NOTE
– To resume the normal mode from the Sleep mode, press [ON/OFF] on the operation panel.
– To enter the Sleep mode manually, press [ON/OFF] on the operation panel.
– The machine will not enter the Sleep mode when:
• the machine is in operation
• a system error occurs
• the handset of the external telephone is off the hook
– The machine will leave the Sleep mode when:
• you press [ON/OFF] on the operation panel
• a computer performs a scan through the machine
1-14
Setting Auto Clear Time
If the machine remains idle for a certain period of time, the display returns to the
standby mode (Auto Clear function).
Before Using the Machine
1
2
3
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
1-15
Press [Additional Functions].
Press [
] or [
] to select <TIMER SETTINGS>, then press [OK].
Press [
] or [
] to select <AUTO CLEAR TIME>, then press [OK].
COPY
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
PQRS
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
6
WXYZ
TUV
7
Clear
3
JKL
GHI
Collate
DEF
2
4
Paper
Select
08
ABC
@./
Before Using the Machine
4
5
ded
al
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
4
5
Confirm that <ON> is displayed, then press [OK].
Press [
] or [
] to select the desired interval, then press [OK].
You can set the interval from 1 to 9 minutes (in one-minute increments).
You can also enter values using numeric keys.
6
Press [Stop] to return to the standby mode.
1-16
Setting Time Zone
Before Using the Machine
The standard time zones of the world are expressed globally in terms of the difference
in hours (± up to 12 hours) from GMT (0 hours). A time zone is a region throughout
which this time difference is the same.
1
2
3
4
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
08
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
4
5
Press [Additional Functions].
Press [
] or [
] to select <TIMER SETTINGS>, then press [OK].
Press [
] or [
] to select <TIME ZONE SETTING>, then press [OK].
Press [
] or [
] to select the time zone, then press [OK].
Press [Stop] to return to the standby mode.
NOTE
The specified time zone setting becomes effective after the machine is restarted.
1-17
5
Setting Daylight Saving Time
In some countries or areas, time is advanced throughout the summer season. This is
called “Daylight Saving Time.”
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
Before Using the Machine
1
2
3
4
5
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
4
5
Press [Additional Functions].
Press [
] or [
] to select <TIMER SETTINGS>, then press [OK].
Press [
] or [
] to select <DAYLIGHT SV.TIME>, then press [OK].
Press [
] or [
] to select <ON>, then press [OK].
Confirm that <START DATE/TIME> is displayed, then press [OK].
1-18
Before Using the Machine
6
7
8
9
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
ID
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
1-19
Confirm that <MONTH> is displayed, then press [OK].
] or [
] to select the month, then press [OK].
Confirm that <WEEK> is displayed, then press [OK].
Press [
] or [
Stop
Start
WXYZ
8
[OK]
Press [
ON/OFF
Log In/Out
Tone
6
7
8
9
Counter
Check
C
6
5
TUV
7
Clear
] to select the week, then press [OK].
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
Before Using the Machine
10
11
12
13
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
10
11
12
13
Confirm that <DAY> is displayed, then press [OK].
Press [
] or [
] to select the day, then press [OK].
Confirm that <END DATE/TIME> is displayed, then press [OK].
Confirm that <MONTH> is displayed, then press [OK].
1-20
Before Using the Machine
14
15
16
17
18
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
PQRS
MNO
ID
1-21
] or [
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
] to select the month, then press [OK].
Confirm that <WEEK> is displayed, then press [OK].
Press [
] or [
] to select the week, then press [OK].
Confirm that <DAY> is displayed, then press [OK].
Press [
] or [
Stop
Start
WXYZ
8
Tone
Press [
ON/OFF
Log In/Out
[OK]
14
15
16
17
18
19
Counter
Check
C
6
5
TUV
7
Clear
3
JKL
4
Paper
Select
08
ABC
@./
] to select the day, then press [OK].
Press [Stop] to return to the standby mode.
19
Before Using the Machine
1-22
Document Handling
Document Handling
Document Requirements
Platen Glass
ADF
Type
–
–
–
–
–
Plain paper
Thick documents
Photographs
Small documents (e.g., index cards)
Special types of paper (e.g., tracing
paper*1, transparencies*1, etc.)
– Book (Height: max. 7/8" (20 mm))
Plain paper (Multipage documents of
the same size, thickness and weight
or one page documents.)
Size (W x L)
Max. 8 1/2" x 14"
(Max. 216 x 356 mm)
Max. 8 1/2" x 14"
(Max. 216 x 356 mm)
Min. 5 1/2" x 5"
(Min. 139.7 x 128 mm)
Weight
Max. 4.4 lb (2 kg)
one-sided scanning: 13 to 34 lb bond
(50 to 128 g/m2)
two-sided scanning: 13 to 28 lb bond
(50 to 105 g/m2)
Quantity
1 sheet
Max. 50 sheets*2
(Max. 25 sheets for LGL documents)
*1 When copying a transparent document such as tracing paper or transparencies, use a piece of plain
white paper to cover the document after placing it face-down on the platen glass.
*2 21 lb bond (80 g/m2) paper
2-1
2-2
Document Handling
● Do not place the document on the platen glass or in the ADF until the glue, ink or
correction fluid on the document is completely dry.
● Remove all fasteners (staples, paper clips, etc.) before loading the document in the
ADF.
● To prevent document jams in the ADF, do not use any of the following:
– Wrinkled or creased paper
– Carbon paper or carbon-backed paper
– Curled or rolled paper
– Coated paper
– Torn paper
– Onion skin or thin paper
– Paper printed with a thermal transfer printer
– Transparencies
Scanning Area
Make sure your document’s text and graphics fall within the shaded area in the
following diagram. Note that the margin widths listed are approximate and there
may be slight variations in actual use.
(2 mm)
1/8"
(2 mm)
Document Handling
1/8"
2-3
1/8"
1/8"
(2 mm)
(2 mm)
Loading Documents
On the Platen Glass
Lift up the ADF/platen glass cover.
2
Place your document face down.
3
Align the document with the appropriate paper size marks.
Document Handling
1
If your document does not match any of the paper size marks, align the center of your document
with the arrow mark.
2-4
4
Gently lower the ADF/platen glass cover.
Document Handling
The document is ready for scanning.
CAUTION
– When closing the ADF/platen glass cover, be careful not to get your fingers caught, as
this may result in personal injury.
– Do not press down the ADF/platen glass cover forcefully, as this may damage the platen
glass and cause personal injury.
NOTE
Remove the document from the platen glass when scanning is complete.
2-5
In the ADF
Fan the document stack and even the edges.
2
Adjust the slide guides to the width of the documents.
Document Handling
1
2-6
Document Handling
3
Neatly place the documents face up in the document feeder tray.
The document is ready for scanning.
NOTE
– Do not add or remove documents while they are being scanned.
– When scanning is complete, remove the documents from the document delivery tray to avoid
paper jams.
– Avoid using ADF to scan the same document more than 30 times. When scanned repeatedly,
documents can become folded or torn, which may cause paper jams.
– If the feeder rollers are soiled from scanning a document written in pencil, clean them. (See
“Cleaning the Machine,” on p. 12-1.)
2-7
Document Handling
2-8
Print Media
Print Media
Paper Requirements
Paper Drawer
Stack Bypass
Size (W x L)
LGL, LTR, OFICIO,
FLSP, BRAZIL-OFICIO,
MEXICO-OFICIO, A4
3" x 5" to Legal (8 1/2" x 14")
(76 x 127 to 216 x 356 mm)
Weight
17 to 24 lb bond
(64 to 90 g/m2)
15 to 34 lb bond
(56 to 128 g/m2)
Quantity
Max. 500 sheets*1
Max. 100 sheets*1
Plain *2
{
{
Color *2
{
{
Recycled *2
{
{
Heavy 1 *3
{
{
Heavy 2 *4
–
{
Heavy 3 *5
–
{
Bond *6
{
{
3hole punch paper *7
{
{
Transparency *8
–
{
Labels
–
{
Envelopes
–
{
Type
({: available –: not available)
3-1
*1
21 lb bond (80 g/m2) paper
From 17 to 21 lb bond (64 to 80 g/m2)
*3 From 22 to 24 lb bond (81 to 90 g/m2)
*4
From 24 to 28 lb bond (91 to 105 g/m2)
*5 From 28 to 34 lb bond (106 to 128 g/m2)
*6 20 lb bond (75 g/m2)
*7
LTR size only
*8 Use only LTR transparencies made especially for this machine.
*2
Print Media
NOTE
The default paper size is LTR. If you use a different paper size, you must change the paper size settings.
(See “Setting Paper Type and Size,” on p. 3-8.)
3-2
Printable Area
The shaded area indicates the approximate printable area of LTR paper.
Note that the margin widths listed are approximate and there may be slight
variations in actual use.
Print Media
Fax : 1/8" (4.0 mm)
Copy : 1/8" (2.9 mm)
Fax : 1/4" (6.0 mm)
Copy : 1/4" (4.7 mm)
Fax : 1/8"
Fax : 1/8"
(3.0 mm)
(3.0 mm)
1
Copy : 1/8"
Copy : /8"
(3.6 mm)
(2.7 mm)
3-3
Paper Guidelines
3-4
Print Media
● To prevent paper jams, do not use any of the following:
– Wrinkled or creased paper
– Curled or rolled paper
– Coated paper
– Torn paper
– Damp paper
– Very thin paper
– Paper which has been printed on using a thermal transfer printer (Do not copy on
the reverse side.)
● The following types of paper do not print well:
– Highly textured paper
– Very smooth paper
– Shiny paper
● Make sure the paper is free from dust, lint, and oil stains.
● Be sure to test paper before purchasing large quantities.
● Store all paper wrapped and on a flat surface until ready for use. Keep opened packs
in their original packaging in a cool, dry location.
● Store paper at 64.4°F–75.2°F (18°C–24°C), 40%–60% relative humidity.
● Use only transparencies designed for laser printers. Canon recommends you use
Canon type transparencies with this machine.
Loading Paper
To load paper in the paper drawer, see “Set Up the Machine,” in the Quick Start
Guide.
In the Stack Bypass (e.g., Envelopes)
Print Media
If you are making prints on transparencies, labels, nonstandard-sized paper, or
envelopes, load them into the stack bypass.
● Use standard envelopes with diagonal seams and flaps.
● To prevent jams, do not use the following:
– Envelopes with windows, holes, perforations, cutouts, or double flaps
– Envelopes made with special coated paper or deeply embossed paper
– Envelopes with peel-off sealing strips
– Envelopes with letters enclosed
● Make sure to set the correct envelope size in the printer driver. (See Online Help.)
1
3-5
Open the stack bypass.
2
Pull out the stack bypass extension until it clicks, then open it.
NOTE
3
Gently load the stack of envelopes with the address side facing down and
the flap side to the left. Be sure to insert the envelopes as far as they will
go.
When you load the envelopes, arrange the stack of envelopes on a firm, clean surface first, then
press down firmly on the edges to make the folds crisp.
3-6
Print Media
Do not load the paper without using the stack bypass extension.
4
Adjust the slide guides to the width of the paper stack.
NOTE
Print Media
– Make sure that the paper stack does not exceed the paper limit guide.
– Some types of paper may not feed properly into the stack bypass. For high quality copies, be
sure to use the paper and transparencies recommended by Canon.
– When making copies of a small document or thick paper, etc., the copy speed may be slightly
slower than usual.
3-7
Setting Paper Type and Size
For the Paper Drawer
The default settings are <PLAIN PAPER> and <LTR>. When you place other types
and/or sizes of paper, follow this procedure to change the settings.
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
Print Media
1
2
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
Press [Additional Functions].
Confirm that <COMMON SETTINGS> is displayed, then press [OK].
3-8
3
4
5
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Print Media
[OK]
3
4
5
Press [
] or [
] to select <SELECT PAPER TYPE>, then press [OK].
Confirm that <DRAWER 1> is displayed, then press [OK].
Press [
] or [
] to select the paper type, then press [OK].
<PLAIN PAPER>, <COLOR>, <RECYCLED>, <HEAVY PAPER 1>, <BOND>, <3HOLE PUNCH
PAPER>
If you use the optional paper drawer, confirm that <DRAWER 2> is displayed and press [OK]. Then
repeat this step to set the paper type for <DRAWER 2>.
3-9
6
7
8
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
JKL
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
9
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
6
7
8
Print Media
[OK]
Confirm that <REG. PAPER SIZE> is displayed, then press [OK].
Confirm that <DRAWER 1> is displayed, then press [OK].
Press [
] or [
] to select the paper size, then press [OK].
<LTR>, <LGL>, <OFICIO>, <FLSP>, <BRAZIL-OFICIO>, <MEXICO-OFICIO>, <A4>
If you use the optional paper drawer, confirm that <DRAWER 2> is displayed and press [OK]. Then
repeat this step to set the paper size for <DRAWER 2>.
9
Press [Stop] to return to the standby mode.
3-10
For the Stack Bypass
Print Media
To print using the stack bypass, follow this procedure to specify the paper size and
type.
1
2
3
4
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
4
Press [Additional Functions].
Confirm that <COMMON SETTINGS> is displayed, then press [OK].
Press [
] or [
] to select <BYPASS STD SET>, then press [OK].
Press [
] or [
] to select <ON>, then press [OK].
NOTE
If you select <OFF>, you must specify paper size and type every time you load paper on the stack
bypass. When the display to specify the paper size for the stack bypass appear, press [
] or
[
] to select the paper size, then press [OK]. Consequently, press [
] or [
] to select the
paper type, then press [OK].
3-11
5
6
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
5
6
Print Media
[OK]
Confirm that <PAPER SIZE> is displayed, then press [OK].
Press [
] or [
] to select the paper size, then press [OK].
<LTR>, <STMTR>, <EXECUTIV>, <OFICIO>, <BRAZIL-OFICIO>, <MEXICO-OFICIO>,
<FOLIO>, <G-LTR>, <G-LGL>, <FLSP>, <COM10>*1, <MONARCH>*1, <DL>*1, <ISO-C5>*1,
<ISO-B5>*1, <FREESIZE>*2, <A4>, <B5>, <A5R>, <LGL>
*1 For envelopes.
If you select this size, <ENVELOPE> is automatically selected for the paper type, and the
display for selecting the paper type does not appear. Skip to step 9.
*2 For non-standard paper size.
If you select this size, enter the vertical size in <VERTICAL SIZE> (76 to 216 mm (3 to 8 1/2
inch)) with the numeric keys, then press [OK].
Enter the horizontal size in <HORIZONTAL SIZE> (127 to 356 mm (5 to 14 1/8 inch)) with the
numeric keys, then press [OK].
You can also press [
] or [
] to specify the size.
(<VERTICAL SIZE> represents the length of the paper that feeds into the machine.)
3-12
7
8
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
JKL
GHI
Collate
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
9
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Print Media
[OK]
7
8
Confirm that <SELECT PAPER TYPE> is displayed, then press [OK].
Press [
] or [
] to select the paper type, then press [OK].
<PLAIN PAPER>, <COLOR>, <RECYCLED>, <HEAVY PAPER 1>, <HEAVY PAPER 2>,
<HEAVY PAPER 3>, <BOND>, <3HOLE PUNCH PAPER>, <TRANSPARENCY>, <LABELS>,
<ENVELOPE>
9
3-13
Press [Stop] to return to the standby mode.
Print Media
3-14
Sending Documents
Sending Documents
Follow this procedure to send faxes, e-mails, and I-faxes, or to send documents to a file
server.
For network connection, see “Set the Machine for Network Usage,” in the Quick Start
Guide, and for advanced sending features, see Chapter 1, “Advanced Send Features,”
in the Advanced Operation Guide.
1
2
Set a Document
Select the Sending Method
COPY
CBA
SEND
s
Paper
Select
Image Quality
Place the document on the platen
glass or load it in the ADF.
For documents you can send, see “Document
Requirements,” on p. 2-1.
SCAN
OK
Density
Copy Ratio
System
Monitor
View
Settings
Reset
Collate
Additional
Functions
2 on 1
Two-Sided
Frame Erase
Press [SEND], press [
] or [
]
to select the sending method, then
press [OK].
The SEND indicator lights up and the machine enters
the send standby mode.
What if...
● You want to send document to a file
server:
You can specify the file server addresses
only with one-touch keys, coded dial
codes, or [Address Book] key. See
“Specifying Destinations,” on p. 4-11.
4-1
PQ
3
Specify the Destination
View
Settings
stem
nitor
ABC
@./
set
GHI
Collate
2
JKL
4
tional
ctions
d
2 on 1
PQRS
3
MNO
5
Counter
Check
ON/OFF
8
ID
0
Stop
set
GHI
Collate
2 on 1
DEF
2
JKL
4
onal
ions
9
#
ABC
@./
Start
SYMBOLS
Frame Erase
View
Settings
1
Log In/Out
6
em
itor
C
WXYZ
TUV
7
Clear
Send the Document
PQRS
MNO
What if...
● You enter a wrong number when
specifying a fax number:
Go back to the wrong digit with [
].
● You enter a wrong character when
specifying an e-mail or I-fax address :
Go back to the wrong character with
[
], then press [Clear]. Or press and
hold [Clear] to delete the entire entry.
ON/OFF
C
Stop
Log In/Out
6
ID
Start
8
9
SYMBOLS
0
Processing/
Data Error Power
Specify the fax number or e-mail/
I-fax address with the numeric keys.
Counter
Check
WXYZ
TUV
Frame Erase
Tone
3
5
7
Clear
Sending Documents
1
DEF
4
#
Processing/
Data Error Power
Tone
Press [Start].
When you set the documents on the platen glass, press
[
] or [
] to select the document size, then
press [Start] for each document. When scanning is
complete, press [OK] to start dialing.
What if...
● You want to cancel sending:
Press [Stop] on the operation panel.
When the <STOP KEY PRESSED>
message appears, press [OK].
When the <CANCEL DURING TX/RX?>
message appears, select <YES> with
[
].
4-2
Scan Settings
You can adjust the image quality and density of the document you send. The
higher image quality you set, the better the output will be, but the longer the
transmission will take. You can also scan two sided documents. Adjust the scan
settings according to the type of document you are sending.
Image Quality
Sending Documents
NOTE
If you are sending documents to an e-mail, I-fax, or file server address, you can also specify the resolution
(Image Quality) by pressing [OK] after specifying the destination. For instructions, see “Send Settings,” on
p. 4-7.
1
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
1
After pressing [SEND] and selecting the sending method, or after
specifying the destination, press [Image Quality].
For instructions on selecting sending methods and specifying destinations, see “Specifying
Destinations,” on p. 4-11.
4-3
COPY
2
SEND
SCAN
View
Settings
System
Monitor
ress
ok
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Press [
] or [
Sending Documents
2
] to select the image quality, then press [OK].
You can also press [Image Quality] repeatedly to select the image quality.
E-mail (B&W): <200x200dpi>, <300x300dpi>, <400x400dpi>, <600X600dpi>, <150X150dpi>,
<200x100dpi>
E-mail (Color): <200x200dpi>, <300x300dpi>, <100X100dpi>, <150X150dpi>
I-fax: <200x200dpi>, <200x100dpi>
File server (FTP and SMB): <200x200dpi>, <300x300dpi>, <400x400dpi>, <600X600dpi>,
<150X150dpi>, <200x100dpi>
NOTE
– If <PDF (COMPACT)> is selected as the file format, only <300x300dpi> can be selected for
sending color images attached to an e-mail message.
– If you specify an e-mail address from Address Book without selecting the sending method,
settings specified in <STANDARD SETTINGS> in <TX SETTINGS> in <COMMON SETTINGS>
in <TX/RX SETTINGS> are displayed.
– If you want to send color images to a file server or attached to an e-mail message, select
<E-MAIL (COLOR)> as a sending method.
4-4
Density
1
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
2
JKL
GHI
Collate
4
Paper
Select
08
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Sending Documents
Tone
[OK]
1
After pressing [SEND] and selecting the sending method, or after
specifying the destination, press [Density].
For instructions on selecting sending methods and specifying destinations, see “Specifying
Destinations,” on p. 4-11.
2
Press [
[
[
4-5
] or [
] to adjust the density, then press [OK].
]: to make light documents darker.
]: to make documents lighter.
2
Two-Sided
1
COPY
2
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
1
Sending Documents
[OK]
After pressing [SEND] and selecting the sending method, or after
specifying the destination, press [Two-Sided].
For instructions on selecting sending methods and specifying destinations, see “Specifying
Destinations,” on p. 4-11.
2
Press [
] or [
] to select the binding type, then press [OK].
<BOOK TYPE>: The front and back sides of the document have the same top-bottom orientation.
<CALENDAR TYPE>: The front and back sides of the document have opposite top-bottom
orientations.
4-6
Send Settings
You can optionally set the file format, if multiple images are sent as separate
files or a single file, resolution, and original type after specifying the e-mail, I-fax,
or file server address.
2
3
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
GHI
Collate
2
JKL
Sending Documents
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
Place the document on the platen glass or load it in the ADF.
Press [SEND].
Press [
] or [
] to select the sending method, then press [OK].
If you are specifying the destination registered in one-touch keys or coded dial codes, you can skip
this step.
4
Specify the destination.
For instructions on specifying destinations, see “Specifying Destinations,” on p. 4-11.
4-7
COPY
6
7
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Sending Documents
5
6
Press [OK].
Press [
] or [
] to select the file format, then press [OK].
If you have specified an I-fax address in step 3, this setting is not available. The file format is
automatically set to <TIFF (B&W)> when sending an I-fax.
E-mail (B&W): <PDF>, <TIFF (B&W)>
E-mail (Color): <JPEG>, <PDF (COMPACT)>
File server (FTP and SMB): <PDF>, <TIFF (B&W)>
NOTE
– If you specify an e-mail address from Address Book without selecting the sending method,
settings specified in <STANDARD SETTINGS> in <TX SETTINGS> in <COMMON SETTINGS>
in <TX/RX SETTINGS> are displayed.
– If you want to send color images to a file server or attached to an e-mail message, select
<E-MAIL (COLOR)> as a sending method.
7
Press [
] or [
then press [OK].
] to select <ON> or <OFF> for <DIVIDE INTO PAGES>,
If you have selected <JPEG> in step 6, this setting is not available.
<DIVIDE INTO PAGES> is automatically set to <ON> when sending documents in JPEG format.
<OFF>: Sends multiple images as a single file without dividing them.
<ON>: Separates multiple images and send them as separate files.
4-8
COPY
8
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
8
Press [
] or [
] to select the resolution, then press [OK].
E-mail (B&W): <200x200dpi>, <300x300dpi>, <400x400dpi>, <600X600dpi>, <150X150dpi>,
<200x100dpi>
E-mail (Color): <200x200dpi>, <300x300dpi>, <100X100dpi>, <150X150dpi>
I-fax: <200x200dpi>, <200x100dpi>
File server (FTP and SMB): <200x200dpi>, <300x300dpi>, <400x400dpi>, <600X600dpi>,
<150X150dpi>, <200x100dpi>
NOTE
– If <PDF (COMPACT)> is selected as the file format, only <300x300dpi> can be selected for
sending color images attached to an e-mail message.
– If you want to send color images to a file server or attached to an e-mail message, select
<E-MAIL (COLOR)> as a sending method.
4-9
COPY
9
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
08
2
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
10
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Press [
] or [
Sending Documents
9
] to select the original type, then press [OK].
<TEXT/PHOTO>, <TEXT>, <PHOTO>
If you have selected <PDF (COMPACT)> as the file format in step 6, the original type is
automatically set to <TEXT/PHOTO>. Skip to step 10.
10
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document size,
then press [Start] for each document. When scanning is complete, press [OK] to start sending.
NOTE
– When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the destination by any other method than using numeric
keys, the machine starts scanning automatically without pressing [Start], after the preset time for
this setting is elapsed.
– You can set the document’s name, a subject line, message body text, and reply-to address, and
e-mail priority common to all sending jobs. For instructions, see Chapter 1, “Advanced Send
Features” in the Advanced Operation Guide.
4-10
Specifying Destinations
Sending Documents
This machine provides you with various ways to specify the destination:
● Using Numeric Keys (p. 4-12)
– You can specify a fax number, e-mail address, or I-fax address using the numeric
keys.
● Using One-Touch Keys (p. 4-15)
– You can specify one or more destinations by pressing one-touch keys. You can
register up to 23 one-touch keys, including group addresses and favorites buttons.
● Using Coded Dial Codes (p. 4-17)
– You can specify one or more destinations by pressing [Coded Dial] followed by
three-digit code. You can register up to 177 coded dial codes, including group
addresses.
● Using Group Addresses (p. 4-19)
– You can specify one or more groups of destinations registered in one-touch keys
and coded dial codes. You can register up to 199 destinations in a group.
● Using Address Book Key (p. 4-21)
– You can specify destinations by pressing [Address Book] and searching a
destination from Address Book.
● Using Favorites Buttons (p. 4-25)
– You can specify destinations together with their scan and send settings by
pressing one-touch keys assigned for favorites buttons. Up to four favorites
buttons can be registered.
NOTE
For easy reference, print out the list of recipients registered in one-touch keys or coded dial codes.
(See “REPORT SETTINGS,” on p. 14-38.)
4-11
Using Numeric Keys
NOTE
– You can specify only one destination at a time using the numeric keys.
– You cannot specify a file server using the numeric keys.
2
3
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Sending Documents
2
ABC
@./
Processing/
Data Error Power
Tone
[OK]
1
2
3
Place the document on the platen glass or load it in the ADF.
Press [SEND].
Press [
] or [
] to select the sending method, then press [OK].
<FAX>, <E-MAIL:B&W>, <E-MAIL:COLOR>, <I-FAX>
4-12
4
COPY
ed
l
Address
Book
4
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
2
JKL
GHI
Collate
4
Paper
Select
8
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Sending Documents
Tone
4
Enter the fax number or e-mail/I-fax address with the numeric keys.
If you entered a wrong number when specifying a fax number, go back to the wrong digit with
[
].
If you entered a wrong character when specifying an e-mail or I-fax address, press [
] to go
back to the part you want to correct, then press [Clear]. You can also delete the entire entry by
pressing and holding [Clear].
If you specify an e-mail or I-fax address, you can enter the optional settings by pressing [OK]. (See
“Send Settings,” on p. 4-7.)
Ex.
FAX
NUMBER
=012XXXXXXXXX
Ex.
ADDRESS
=sales@XXX.XXX
:a
NOTE
If <CONFIRM FAX NO.> in <ACCESS TO DEST.> in <SYSTEM SETTINGS> is set to <ON> and
you specify a fax number using the numeric keys, you must enter the fax number again for
confirmation. Enter the same fax number you entered in step 4, then press [OK].
4-13
COPY
ded
al
Address
Book
04
M4
5
08
2
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
6
WXYZ
TUV
7
Clear
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
5
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
6
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document
size, then press [Start] for each document. When scanning is complete, press [OK] to start
sending.
4-14
Using One-Touch Keys
You can specify up to 23 destinations using one-touch keys.
NOTE
– To use this feature, you must register destinations in one-touch keys beforehand. (See “Storing/Editing
Address Book,” on p. 4-27.)
– A maximum of 201 destinations can be specified at the same time. (Out of the 201 destinations, a
number or address can be specified with the numeric keys.) If you specify a group, which is made up of
several destinations, each destination in the group is counted as a separate address.
2
COPY
Sending Documents
Direct TX Pause
01
3
05
09
M1
02
06
10
Hook
M2
Recall
03
M3
07
11
Coded
Dial
04
08
12
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
1
2
3
Place the document on the platen glass or load it in the ADF.
Press [SEND].
Press the desired one-touch key (01 to 23).
If you pressed a wrong key, press [Clear] and try again.
If you specify an e-mail, I-fax, or file server address, you can enter the optional settings by
pressing [OK]. (See “Send Settings,” on p. 4-7.)
Ex.
=0123XXXXXX
[05]CANON USA
4-15
COPY
SEND
SCAN
4
View
Settings
System
Monitor
ss
k
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
5
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
4
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
5
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document
size, then press [Start] for each document. When scanning is complete, press [OK] to start
sending.
NOTE
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the destination by any other method than using numeric
keys, the machine starts scanning automatically without pressing [Start], after the preset time for
this setting is elapsed.
4-16
Using Coded Dial Codes
You can specify up to 177 destinations using coded dial codes.
NOTE
– To use this feature, you must register destinations in coded dial code beforehand. (See “Storing/Editing
Address Book,” on p. 4-27.)
– A maximum of 201 destinations can be specified at the same time. (Out of the 201 destinations, a
number or address can be specified with the numeric keys.) If you specify a group, which is made up of
several destinations, each destination in the group is counted as a separate address.
2
Sending Documents
3
COPY
Direct TX Pause
01
05
09
M1
02
Hook
M2
06
10
Recall
03
07
11
M3
Coded
Dial
04
08
12
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
1
2
3
4-17
Place the document on the platen glass or load it in the ADF.
Press [SEND].
Press [Coded Dial].
4
COPY
SEND
SCAN
View
Settings
System
Monitor
dress
ook
1
Reset
5
ABC
@./
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
6
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
4
Enter the desired three-digit code (000 to 176) with the numeric keys.
Ex.
=0123XXXXXX
[*001]CANON
If you entered a wrong code, press [Clear], then try again from step 3.
If you specify an e-mail, I-fax, or file server address, you can enter the optional settings by
pressing [OK]. (See “Send Settings,” on p. 4-7.)
5
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
6
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document
size, then press [Start] for each document. When scanning is complete, press [OK] to start
sending.
NOTE
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the destination by any other method than using numeric
keys, the machine starts scanning automatically without pressing [Start], after the preset time for
this setting is elapsed.
4-18
Using Group Addresses
NOTE
– To use this feature, you must register destinations in a group address beforehand. (See “Storing/Editing
Address Book,” on p. 4-27.)
– A maximum of 201 destinations can be specified at the same time. (Out of the 201 destinations, a
number or address can be specified with the numeric keys.) If you specify a group, which is made up of
several destinations, each destination in the group is counted as a separate address.
2
COPY
Direct TX Pause
Sending Documents
3
01
05
09
M1
02
06
10
Hook
M2
Recall
03
07
11
M3
Coded
Dial
04
08
12
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
1
2
3
Place the document on the platen glass or load it in the ADF.
Press [SEND].
Press the one-touch key or [Coded Dial] followed by the three-digit code
under which the desired address group is registered.
If you pressed a wrong key or code, press [Clear], and perform step 3 again.
If you specify a group containing e-mail, I-fax, or file server addresses, you can enter the optional
settings by pressing [OK]. (See “Send Settings,” on p. 4-7.)
4-19
COPY
SEND
SCAN
4
View
Settings
System
Monitor
ss
k
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
5
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
4
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
5
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document
size, then press [Start] for each document. When scanning is complete, press [OK] to start
sending.
NOTE
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the destination by any other method than using numeric
keys, the machine starts scanning automatically without pressing [Start], after the preset time for
this setting is elapsed.
4-20
Using Address Book Key
[Address Book] search enables you to search for a recipient registered in the machine.
This is useful when you forget which one-touch key or coded dial code the recipient
you want is registered under.
NOTE
Sending Documents
– You cannot search for the destinations registered under favorites buttons using [Address Book] key.
– To use this feature, you must register destinations in Address Book beforehand. (See “Storing/Editing
Address Book,” on p. 4-27.)
– A maximum of 201 destinations can be specified at the same time. (Out of the 201 destinations, a
number or address can be specified with the numeric keys.) If you specify a group, which is made up of
several destinations, each destination in the group is counted as a separate address.
2
COPY
Direct TX Pause
01
05
09
M1
02
06
10
Hook
M2
Recall
03
07
11
M3
Coded
Dial
04
08
12
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
1
2
4-21
Place the document on the platen glass or load it in the ADF.
Press [SEND].
3
COPY
Direct TX Pause
4
01
05
09
M1
02
06
10
Hook
M2
Recall
03
M3
07
11
Coded
Dial
04
08
12
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
[OK]
Sending Documents
3
Press [Address Book].
If no recipient is registered in Address Book, <NOT REGISTERED> is displayed.
4
Press [
] or [
then press [OK].
] to select <NAME SEARCH> or <ADD/TEL SEARCH>,
<NAME SEARCH>: searches a destination by name
<ADD/TEL SEARCH>: searches a destination by address or fax number
4-22
5
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
6
Reset
2
JKL
GHI
Collate
4
Paper
Select
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
5
Enter the first letter of the recipient’s name or the first part of the fax
number/address with the numeric keys.
For example, if you want to search for a name that starts with the letter “C”, press [2] (ABC).
Entries starting with the letter you entered are displayed if any entries are registered.
Press [ ] to switch between input modes:
[:A]: Letter mode
[:1]: Number mode
Ex.
NAME SEARCH
CANON
:A
Ex.
ADD/TEL SEARCH
canon@XXX.XXX
6
Press [
[
[
4-23
] or [
:A
] to search for the recipient.
]: displays recipients in alphabetical order.
]: displays recipients in reverse order.
COPY
SEND
SCAN
View
Settings
System
Monitor
ress
ok
1
Reset
8
ABC
@./
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
9
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Sending Documents
7
When the recipient’s name is displayed, press [OK].
If you specify an e-mail, I-fax, or file server address, you can enter the optional settings by
pressing [OK] again. (See “Send Settings,” on p. 4-7.)
8
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
9
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document
size, then press [Start] for each document. When scanning is complete, press [OK] to start
sending.
NOTE
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the destination by any other method than using numeric
keys, the machine starts scanning automatically without pressing [Start], after the preset time for
this setting is elapsed.
4-24
Using Favorites Buttons
NOTE
– To use this feature, you must register destinations in favorites buttons beforehand. (See Chapter 1,
“Advanced Send Features,” in the Advanced Operation Guide.)
2
Sending Documents
3
COPY
Direct TX Pause
01
M1
02
Hook
M2
Recall
03
M3
Coded
Dial
04
05
06
07
08
09
10
11
12
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
1
2
3
Place the document on the platen glass or load it in the ADF.
Press [SEND].
Press the desired one-touch key registered as a favorites button (01 to 04).
If you pressed a wrong key, press [Clear] and try again.
4-25
COPY
ed
l
SEND
SCAN
View
Settings
System
Monitor
Address
Book
1
Reset
4
8
ABC
@./
Collate
GHI
2 on 1
PQRS
2
JKL
4
M4
Paper
Select
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
DEF
3
MNO
Counter
Check
ON/OFF
C
ID
Start
WXYZ
9
8
4
Stop
Log In/Out
6
5
TUV
7
Clear
5
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
4
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
5
Press [Start].
When you set the documents on the platen glass, press [
] or [
] to select the document
size, then press [Start] for each document. When scanning is complete, press [OK] to start
sending.
NOTE
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX
SETTINGS>, and if you have specified the destination by any other method than using numeric
keys, the machine starts scanning automatically without pressing [Start], after the preset time for
this setting is elapsed.
4-26
Storing/Editing Address Book
Sending Documents
The Address Book is a feature used for storing fax, e-mail, I-fax, and file server
destinations. The Address Book is divided into one-touch keys and coded dial
codes. You can store up to 23 destinations in one-touch keys, and 177
destinations in coded dial codes, for a total of 200 destinations in the whole
Address Book. You can also register multiple destinations of various types in a
group address, and assign a one-touch key or coded dial code to this group.
Registering a destination in the Address Book saves you the effort of entering
that destination’s address each time you send a job.
NOTE
– You can also register a destination in favorites buttons together with a specific combination of the scan
and send settings. One-touch keys 01 to 04 can be used for this feature. For instructions on registering
favorites buttons, see Chapter 1, “Advanced Send Features,” in the Advanced Operation Guide.
– Destinations stored in the Address Book can be exported to your computer as a file, which can be
imported into the machine. For information on exporting the Address Book, see Chapter 4, "Remote UI,"
in the Advanced Operation Guide.
Storing/Editing One-Touch Keys/Coded Dial Codes
NOTE
– You can also register file server addresses in one-touch keys and coded dial codes. For instructions, see
Chapter 1, “Advanced Send Features,” in the Advanced Operation Guide.
– If a password has been set for the Address Book, a screen prompting you to enter the password
appears. Enter the password using the numeric keys, then press [OK]. (See Chapter 6, “System
Manager Settings,” in the Advanced Operation Guide.)
4-27
● Registering Fax Numbers
1
2
3
4
5
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
4
Sending Documents
1
2
3
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <1-TOUCH SPD DIAL> or <CODED SPD
DIAL>, then press [OK].
Press [
] or [
] to select a one-touch key (01 to 23) or coded dial
code (000 to 176) for which you want to register the fax number, then press
[OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch
key, or [Coded Dial] followed by the desired three-digit code.
5
Confirm that <FAX> is displayed, then press [OK].
4-28
6
8
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
2
JKL
4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
DEF
3
MNO
Counter
Check
ON/OFF
C
ID
7
Stop
Log In/Out
6
5
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
6
7
Confirm that <NAME> is displayed, then press [OK].
Enter the destination name (max. 16 letters, including spaces) with the
numeric keys, then press [OK].
Ex.
NAME
Can
8
4-29
:a
Confirm that <TEL NUMBER ENTRY> is displayed, then press [OK].
10
11
9
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Enter the fax number you register (max. 120 digits, including spaces and
pauses) with the numeric keys, then press [OK].
If you want to specify the following optional settings (<ECM>, <TX SPEED>, and
<INTERNATIONAL>) for the fax number you are registering, proceed to the next step.
If you do not need to set these options, skip to step 18.
Ex.
TEL NUMBER
012XXXXXXX
10
11
ENTRY
Confirm that <OPTIONAL SETTING> is displayed, then press [OK].
Press [
] or [
] to select <ON>, then press [OK].
4-30
Sending Documents
9
12
13
14
15
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
GHI
Collate
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
PQRS
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
3
JKL
4
Paper
Select
DEF
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
12
13
14
15
Confirm that <ECM> is displayed, then press [OK].
Press [
] or [
] to select <ON> to reduce system and line errors while
sending to or receiving from other machines that support ECM, then press
[OK].
Confirm that <TX SPEED> is displayed, then press [OK].
Press [
] or [
] to select the sending speed (33600 bps, 14400 bps,
9600 bps, or 4800 bps), then press [OK].
NOTE
If transmission errors occur frequently, lower the speed.
4-31
16
17
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
18
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Confirm that <INTERNATIONAL> is displayed, then press [OK].
Press [
] or [
press [OK].
] to select the most effective transmission option, then
<DOMESTIC>: Normally select this option.
<LONG DISTANCE 1-3>: Select one of these options when you make an international call. If
errors occur during fax transmissions, try the setting from <LONG DISTANCE 1> through
<LONG DISTANCE 3>.
To register another one-touch key or coded dial code, repeat the procedure from step 4.
18
Press [Stop] to return to the standby mode.
4-32
Sending Documents
16
17
● Registering E-Mail/I-Fax Addresses
1
2
3
4
5
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <1-TOUCH SPD DIAL> or <CODED SPD
DIAL>, then press [OK].
Press [
] or [
] to select a one-touch key (01 to 23) or coded dial
code (000 to 176) for which you want to register the address, then press
[OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch
key, or [Coded Dial] followed by the desired three-digit code.
5
4-33
Press [
] or [
] to select <E-MAIL> or <IFAX>, then press [OK].
6
8
COPY
ded
al
Address
Book
04
M4
SEND
View
Settings
System
Monitor
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
Paper
Select
2
ABC
@./
1
Reset
08
7
9
SCAN
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
10
WXYZ
TUV
7
Clear
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Confirm that <NAME> is displayed, then press [OK].
Enter the destination name (max. 16 letters, including spaces) with the
numeric keys, then press [OK].
Ex.
NAME
Can
8
9
:a
Confirm that <E-MAIL ADDRESS> or <I-FAX ADDRESS> is displayed, then
press [OK].
Enter the address you register (max. 120 digits) with the numeric keys,
then press [OK].
To register another one-touch key or coded dial code, repeat the procedure from step 4.
Ex.
E-MAIL ADDRESS
sales@XXX.com
10
:a
Press [Stop] to return to the standby mode.
4-34
Sending Documents
6
7
● Editing One-Touch Keys/Coded Dial Codes
1
2
3
4
COPY
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <1-TOUCH SPD DIAL> or <CODED SPD
DIAL>, then press [OK].
Press [
] or [
] to select the one-touch key (01 to 23) or coded dial
code (000 to 176) you want to edit, then press [OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch
key, or [Coded Dial] followed three-digit code.
4-35
5
6
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
6
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
7
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Confirm that <NAME> is displayed, then press [OK].
Press [
] repeatedly to go back to the character you want to change,
then press [Clear].
To delete the entire entry, press and hold [Clear].
7
Enter a new character with the numeric keys, then press [OK].
4-36
Sending Documents
5
6
8
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
System
Monitor
View
Settings
1
Reset
9
08
2
ABC
@./
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
9
10
11
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
8
9
Confirm that <TEL NUMBER ENTRY>, <E-MAIL ADDRESS>, or <I-FAX
ADDRESS> is displayed, then press [OK].
Go back to the wrong digit with [
] when you edit a fax number. Or
press [
] repeatedly to go back to a wrong number or character, then
press [Clear] when you edit an e-mail or I-fax address.
To delete the entire entry, press and hold [Clear].
10
Enter a new number or character with the numeric keys, then press [OK].
If you are editing a one-touch key or coded dial code under which a fax number is registered, you
can also change the optional settings. For instructions, see “Registering Fax Numbers,” on p. 4-28.
11
4-37
Press [Stop] to return to the standby mode.
● Deleting One-Touch Keys/Coded Dial Codes
1
2
3
4
COPY
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
4
Sending Documents
1
2
3
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <1-TOUCH SPD DIAL> or <CODED SPD
DIAL>, then press [OK].
Press [
] or [
] to select the one-touch key (01 to 23) or coded dial
code (000 to 176) you want to delete, then press [OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch
key, or [Coded Dial] followed by the desired three-digit code.
4-38
5
6
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
System
Monitor
View
Settings
ABC
@./
1
Reset
2
JKL
GHI
Collate
4
Paper
Select
08
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
7
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
5
6
Press [
] or [
] to select <TEL NUMBER ENTRY>, <E-MAIL
ADDRESS>, or <I-FAX ADDRESS>, then press [OK].
Press and hold [Clear] to delete the entire entry, then press [OK].
NOTE
If you delete the fax number or e-mail/I-fax address, the registered name is cleared automatically.
7
4-39
Press [Stop] to return to the standby mode.
Storing/Editing Group Addresses
NOTE
The destinations must be registered in one-touch keys, or coded dial codes beforehand.
● Registering Group Addresses
COPY
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
Sending Documents
1
2
3
4
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select an empty one-touch key or coded dial code
that you want to set as the group address, then press [OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch
key, or [Coded Dial] followed by the desired three-digit code.
4-40
5
7
COPY
Direct TX Pause
01
M1
02
Hook
M2
Recall
03
M3
Coded
Dial
04
05
06
07
08
09
10
11
12
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
Sending Documents
[OK]
5
6
Confirm that <SELECT ADD/TEL NO> is displayed, then press [OK].
Select the destinations you want to register in the group (max. 199
destinations) until all destinations are registered, then press [OK].
To enter a destination stored under a one-touch key, press the desired one-touch key.
To enter a destination stored under a coded dial code, press [Coded Dial], then enter the threedigit code with the numeric keys. For multiple entries, press [Coded Dial] between each entry.
NOTE
– You cannot register the destination stored under a favorites button in a group.
– You can review the destinations which have been already entered with [
] or [
7
4-41
Confirm that <NAME> is displayed, then press [OK].
].
8
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
GHI
Collate
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
9
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Enter the group name (max. 16 letters, including spaces) with the numeric
keys, then press [OK].
To register another group, repeat the procedure from step 4.
Ex.
NAME
Canon
9
Group
:a
Press [Stop] to return to the standby mode.
4-42
Sending Documents
8
● Adding New Destination to Group
1
2
3
4
COPY
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select a group to edit, then press [OK].
To select a group stored under the coded dial code, press [Coded Dial], then enter the three-digit
code using the numeric keys.
4-43
COPY
5
SEND
SCAN
View
Settings
System
Monitor
ress
ok
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
7
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Sending Documents
5
6
Confirm that <SELECT ADD/TEL NO> is displayed, then press [OK].
Select the destination you want to add to the group, then press [OK].
For details on specifying a destination from Address Book, see “Registering Group Addresses,” on
p. 4-40.
7
Press [Stop] to return to the standby mode.
4-44
● Deleting Destination from Group
1
2
3
4
5
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select a group to edit, then press [OK].
To select a group stored under the coded dial code, press [Coded Dial], then enter the three-digit
code using the numeric keys.
5
4-45
Confirm that <SELECT ADD/TEL NO> is displayed, then press [OK].
6
7
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
10
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
7
8
9
10
Press [
group.
] or [
] to display the destination you want to delete from the
Press [Clear].
Repeat steps 6 and 7 if you want to delete another destination.
Press [OK].
Press [Stop] to return to the standby mode.
4-46
Sending Documents
6
● Changing Group Name
1
2
3
4
5
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select a group to edit, then press [OK].
To select a group stored under the coded dial code, press [Coded Dial], then enter the three-digit
code using the numeric keys.
5
4-47
Press [
] or [
] to select <NAME>, then press [OK].
COPY
SEND
SCAN
System
Monitor
s
View
Settings
ABC
@./
1
Reset
2
JKL
GHI
Collate
4
6
Paper
Select
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
8
WXYZ
TUV
7
Clear
6
7
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Press [
] repeatedly to go back to a wrong character, then press [Clear].
To delete the entire name, press and hold [Clear].
7
8
Enter a new character with the numeric keys, then press [OK].
Press [Stop] to return to the standby mode.
4-48
Sending Documents
6
● Deleting Group Addresses
1
2
3
4
5
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select a group to delete, then press [OK].
To select a group stored under the coded dial code, press [Coded Dial], then enter the three-digit
code using the numeric keys.
5
4-49
Confirm that <SELECT ADD/TEL NO> is displayed, then press [OK].
6
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
08
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
7
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Press [Clear] repeatedly until all destinations are deleted, then press [OK].
NOTE
When you delete all destinations, the registered name is cleared automatically.
7
Press [Stop] to return to the standby mode.
4-50
Sending Documents
6
Manual Sending
Use manual sending when you want to talk to the recipient before sending a
document, or if the recipient does not have a fax machine that can receive
automatically.
NOTE
– You cannot use the platen glass for manual sending.
– You cannot use group dialing for manual sending.
– You cannot use Two-Sided scanning mode for manual sending.
Sending Documents
3
COPY
SEND
SCAN
View
Settings
System
Monitor
s
ABC
@./
1
Reset
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
1
Connect an external telephone to the machine if you want to talk to the
recipient before sending a document.
For details on how to connect an external telephone to the machine, see “Set Up the Machine,” in
the Quick Start Guide.
2
3
4-51
Load the document in the ADF.
Press [SEND].
COPY
4
SEND
SCAN
View
Settings
System
Monitor
ress
ok
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
5
Additional
Functions
OK
Image Quality
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
5
Tone
[OK]
Press [
] or [
Sending Documents
4
5
] to select <FAX>, then press [OK].
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
4-52
7
6
COPY
Pause
Hook
Recall
Coded
Dial
S
View
Settings
Address
Book
1
M2
06
10
03
07
11
M3
04
08
12
4
M4
Paper
Select
Image Quality
2 on 1
DEF
2
JKL
GHI
Collate
02
ABC
@./
PQRS
ON/OFF
C
MNO
Stop
Start
6
5
10
WXYZ
TUV
7
Clear
3
8
9
SYMBOLS
Frame Erase
Density
0
#
Processing/
Data Error Power
Sending Documents
Tone
6
7
Press [Hook] or pick up the handset of your external telephone.
Dial the recipient’s fax/telephone number.
NOTE
– Make sure to confirm the dial tone before entering a fax number. If you enter the number before
the dial tone can be heard, the call may not connect, or the wrong number may be dialed.
– If <CONFIRM FAX NO.> in <ACCESS TO DEST.> in <SYSTEM SETTINGS> is set to <ON>
and you specify a fax number using the numeric keys, you must enter the fax number again for
confirmation. Enter the same fax number you entered in step 7, then press [OK].
8
Talk through the handset to the recipient.
If you press [Hook] in step 6, you can pick up the handset when you hear the recipient’s voice.
If you hear a high-pitched signal instead of the recipient’s voice, go to step 9.
9
10
4-53
Ask the recipient to set their fax machine to receive faxes.
When you hear a high-pitched signal, press [Start], then hang up the
handset.
Direct Sending
With direct sending, the machine sends the document on the ADF as it scans
one page, without storing all pages into memory at once. You can send a
document ahead of other documents stored in memory.
NOTE
2
COPY
Direct TX Pause
01
05
09
M1
02
06
10
Hook
M2
Recall
03
07
11
M3
Coded
Dial
04
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
08
12
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
1
2
Load the document in the ADF.
Press [SEND].
4-54
Sending Documents
– You cannot use the platen glass for direct sending.
– You can specify only one destination at a time for direct sending.
– You cannot use group dialing for direct sending. If you specify a group, the direct sending mode is
canceled, and the document is sent in the memory sending mode.
– You cannot use Two-Sided scanning mode for direct sending.
– With direct sending, the machine scans one page into memory at once and sends it right away.
Therefore, when <MEMORY FULL> is displayed, even if you have selected direct sending, wait until
there is enough space in memory to scan one page, or delete the documents in memory, and try again.
(See Chapter 5, “System Monitor,” in the Advanced Operation Guide.)
3
4
COPY
Direct TX Pause
01
M1
Hook
02
M2
Recall
03
M3
Coded
Dial
04
05
06
07
08
09
10
11
12
SEND
SCAN
Address
Book
System
Monitor
View
Settings
@./
Reset
Collate
GHI
Additional
Functions
2 on 1
PQRS
1
4
M4
Paper
Select
Image Quality
OK
Density
Copy Ratio
Two-Sided
7
Frame Erase
To
Sending Documents
[OK]
3
4
Press [
] or [
] to select <FAX>, then press [OK].
Press [Direct TX].
To cancel direct sending, press [Direct TX] again.
4-55
6
COPY
5
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
08
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
9
8
7
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Sending Documents
5
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
6
Dial the recipient’s fax/telephone number.
If you select delayed transmission or sequential broadcasting, memory sending is automatically
selected.
NOTE
If <CONFIRM FAX NO.> in <ACCESS TO DEST.> in <SYSTEM SETTINGS> is set to <ON> and
you specify a fax number using the numeric keys, you must enter the fax numaber again for
confirmation. Enter the same fax number you entered in step 6, then press [OK].
7
Press [Start].
Each page is sent as it is scanned.
NOTE
During transmission, <TRANSMITTING...> and the recipient’s fax/telephone number alternately
appear as messages on the LCD display.
4-56
Receiving Fax/I-Fax
Documents
The following shows how the machine operates when it receives a fax or I-fax
document.
For advanced receiving features, see Chapter 1, “Advanced Send Features,” in the
Advanced Operation Guide.
1
When documents are being received, the Processing/Data indicator on the
operation panel flashes a green light.
Receiving Fax/I-Fax Documents
JKL
MNO
5
Stop
Log In/Out
6
ID
Start
WXYZ
TUV
8
9
SYMBOLS
0
e
5-1
#
Processing/
Data Error Power
2
When document reception is complete, the Processing/Data indicator on
the operation panel maintains a steady green light. This indicates that
documents are stored in memory.
JKL
MNO
5
Stop
Log In/Out
6
ID
Start
WXYZ
TUV
8
9
SYMBOLS
0
#
NOTE
– The Processing/Data indicator flashes or maintains a steady green light even when the machine
enters the Sleep mode.
– The Error indicator flashes a red light when either the amount of available memory is low or
paper needs to be loaded into a paper drawer.
3
The document is printed.
The Processing/Data indicator goes out when documents stored in memory are printed.
NOTE
– If there is no paper on which the received document can be printed, the received document is
stored in memory.
– Documents which have been stored in memory because the paper has run out, are
automatically printed when paper is loaded into a paper drawer.
– If a printing error occurs, the Error indicator flashes a red light.
5-2
Receiving Fax/I-Fax Documents
Processing/
Data Error Power
e
Copying
Follow this procedure to make a copy.
For advanced copying features, see Chapter 2, “Advanced Copy Features,” in the
Advanced Operation Guide.
1
2
Set a Document
Enter the Copy Mode
COPY
Copying
CBA
SEND
s
Paper
Select
Image Quality
Place the document on the platen
glass or load it in the ADF.
For documents you can copy, see “Document
Requirements,” on p. 2-1.
SCAN
OK
Density
Copy Ratio
System
Monitor
View
Settings
Reset
Collate
Additional
Functions
2 on 1
Two-Sided
PQ
Frame Erase
Press [COPY].
The COPY indicator lights and the machine enters the
copy standby mode.
What if...
● You want to adjust the image quality
and density:
See “Scan Settings,” on p. 6-3.
6-1
@
3
ystem
onitor
View
Settings
ABC
@./
2
JKL
GHI
Collate
4
ditional
nctions
ed
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
ID
Stop
Reset
0
#
GHI
Collate
ditional
nctions
Processing/
Data Error Power
ed
2 on 1
DEF
2
JKL
4
SYMBOLS
Frame Erase
ABC
@./
Start
9
8
View
Settings
1
WXYZ
TUV
ystem
onitor
C
Log In/Out
6
5
7
Clear
Start Copying
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
Copying
1
Reset
4
Enter the Copy Quantity
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Tone
Enter the copy quantity (1 to 99)
with the numeric key.
Press [Start].
Ex.
100%
A
TEXT
LTR
O3
What if...
● You enter a wrong number:
Press [Clear], and enter a new number.
What if...
● You want to cancel copying:
Press [Stop] on the operation panel.
When the <STOP KEY PRESSED>
message appears, press [OK].
When the <CANCEL COPYING?>
message appears, press [
] to select
<YES>.
6-2
Scan Settings
Before pressing [Start] to begin copying, you can adjust the settings to better
suit the document to be scanned. These settings return to the default values if
the Auto Clear function is activated or if you press [Reset].
Image Quality
Copying
1
2
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
JKL
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
1
2
Press [COPY].
Press [Image Quality] repeatedly to select the document type.
<TEXT>: For text documents.
<PHOTO>: For documents that contain fine text or photos.
<TEXT/PHOTO>: For documents that contain text and photos.
NOTE
Copy density automatically changes to the manual mode when <TEXT/PHOTO> or <PHOTO> is
set.
6-3
Density
You can adjust the density to the most appropriate level for the document either
automatically or manually.
● Adjusting Automatically
1
2
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
1
2
Copying
[OK]
Press [COPY].
Press [Density] to select <AUTO DENSITY>, then press [OK].
NOTE
The image quality is automatically set to <TEXT>.
6-4
● Adjusting Manually
1
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
GHI
Collate
Paper
Select
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
08
2
ABC
@./
PQRS
3
MNO
Counter
Check
ID
Stop
Start
WXYZ
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Copying
[OK]
1
2
3
Press [COPY].
Press [Density] twice to select the manual mode.
Press [
[
[
6-5
] or [
] to adjust the copy density, then press [OK].
]: to make light documents darker
]: to make dark documents lighter
ON/OFF
C
Log In/Out
6
5
TUV
7
Clear
3
Zoom Ratio
● Preset Zoom
You can enlarge or reduce documents from one standard paper size to another.
1
COPY
ded
al
SEND
SCAN
View
Settings
System
Monitor
Address
Book
1
Reset
04
ABC
@./
2
JKL
GHI
Collate
4
M4
Paper
Select
08
2
Image Quality
[OK]
Additional
Functions
OK
Density
2
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
3
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Copying
1
2
3
Press [COPY].
Press [Copy Ratio].
Press [
–
–
–
–
–
–
] or [
] to select the copy ratio, then press [OK].
200% MAX.
129% STMT → LTR
100%
78% LGL → LTR
64% LTR → STMT
50% MIN.
NOTE
When <PAPER SIZE GROUP> in the <COPY SETTINGS> menu is set to <A> or <AB>, the
preset copy ratios change as follows:
A: 50%, 70%, 100%, 141%, 200%
AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
6-6
● Zoom Designation
You can reduce or enlarge images by any copy ratio, in 1% increments. The available
copy ratios are from 50% to 200%.
3
1
2
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
08
2
Image Quality
[OK]
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Copying
Tone
1
2
3
Press [COPY].
Press [Copy Ratio] twice.
Enter the copy ratio with the numeric keys, then press [OK].
Ex.
ZOOM
-
50-200%
80%
+
You can use [
] or [
] to adjust the zoom ratio. To increase the zoom ratio, press [
decrease the copy ratio, press [
].
]. To
NOTE
To return the copy ratio to 100%, press [Copy Ratio] repeatedly to display <100%>, then press
[OK].
6-7
Copying
6-8
Printing
Follow this procedure to print a document from your computer.
Make sure that the printer driver is installed.
For details on the printer driver settings, see Online Help.
NOTE
The optional Barcode Printing Kit is required for the bar code printing function. For details on the bar code
printing function, see Bar Code Printing Guide (supplied with the optional Barcode Printing Kit).
Start the Print Command
2
Select the Printer
Printing
1
From an open document on an
application, click [File] > [Print].
Select the printer icon for the
machine ([Canon iR1018/1022/1023
UFRII LT], [Canon iR1018/1022/1023
PCL5e]*, or [Canon iR1018/1022/
1023 PCL6]*).
* Only for users of the PCL Printer Kit
7-1
3
Adjust Preferences
4
Print the Document
Printing
Click [Preferences] or [Properties]
to open the dialog box. After
finished, click [OK].
Click [Print] or [OK].
What if...
● You want to cancel printing:
See Chapter 5, “System Monitor,” in the
Advanced Operation Guide.
7-2
Scanning
Follow this procedure to scan a document to your computer.
Make sure that the scanner driver is installed.
For details on the scanner driver settings, see the Scanner Driver Guide (in the User
Software CD).
1
Set a Document
2
Enter the Scan Mode
COPY
Scanning
CBA
SEND
Paper
Select
Image Quality
Place the document on the platen
glass or load it in the ADF.
For documents you can scan, see “Document
Requirements,” on p. 2-1.
8-1
SCAN
OK
Density
Copy Ratio
System
Monitor
View
Settings
@
Reset
Collate
G
Additional
Functions
2 on 1
PQR
Two-Sided
Frame Erase
Press [SCAN].
The SCAN indicator lights up and the machine enters
the scan standby mode.
3
4
Set the Scan Function
m
tor
Start Scanning
View
Settings
ABC
@./
1
et
GHI
Collate
2
PQRS
MNO
ID
Stop
Start
WXYZ
TUV
7
ON/OFF
C
Log In/Out
6
5
Counter
Check
Scanning
2 on 1
Clear
3
JKL
4
onal
ons
DEF
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Start iR Toolbox, then set the
scanning format.
The mark will be displayed above the button you select.
Press [Start].
What if...
● You want to cancel scanning:
Press [Stop] on the operation panel,
then click [OK] on the computer screen.
8-2
PC Faxing
Follow this procedure to send a fax from your computer.
Make sure that the fax driver is installed.
For details on the fax driver settings, see Online Help.
Start the Print Command
2
Select the Fax
PC Faxing
1
From an open document on an
application, click [File] > [Print].
Select the fax icon ([Canon iR1022/
1023 (FAX)]), then click [Print] or
[OK].
What if...
● You want to adjust the fax properties:
Click [Preferences] or [Properties] and
adjust the settings.
9-1
3
Set the Destination
4
Send the Document
PC Faxing
Specify the name and fax number in
[Sending Settings], then click [Add
to Recipient List].
What if...
● You want to send a fax with a cover
sheet:
Click the [Cover Sheet] tab and set the
format for the cover sheet attachment.
Click [OK] in the Fax Sending
Settings.
What if...
● You want to cancel sending a fax:
See Chapter 5, “System Monitor,” in the
Advanced Operation Guide.
9-2
Remote UI
Follow this procedure for Remote UI management.
For details, see Chapter 4, “Remote UI,” in the Advanced Operation Guide.
Remote UI
1
Prepare the Network
Set up the machine for use in a
network, then connect the machine
and the PC to your network router
or a hub.
For details, see “Set the Machine for Network Usage,” in
the Quick Start Guide.
10-1
2
Startup
Start the web browser, enter the IP
address of the machine, then press
[Enter] on the keyboard.
3
Log on
Select the logon mode, then click
[OK].
4
Operate the Machine
Now you can manage the machine
on the web browser.
Remote UI
For details, see Chapter 4, “Remote UI,” in the
Advanced Operation Guide.
10-2
System Manager
Settings
Department ID Management
If Department ID Management is set to <ON> in <SYSTEM SETTINGS>, you must
enter your department ID and password to be able to operate the machine. For
details on Department ID Management, see Chapter 6, “System Manager
Settings,” in the Advanced Operation Guide.
Procedure before Using the Machine
COPY
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
2
JKL
GHI
Collate
4
System Manager Settings
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
1
2
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
1
2
Enter the department ID with the numeric keys, then press [OK] or
[Log In/Out].
Enter the password with the numeric keys, then press [OK] or [Log In/Out].
The standby display appears.
11-1
Procedure after Using the Machine
COPY
ed
l
Address
Book
4
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
8
2
ABC
@./
2
JKL
GHI
Collate
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
1
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
1
Be sure to press [Log In/Out].
System Manager Settings
11-2
Optional Card Reader
NOTE
– If the standby display does not appear when the
control card is inserted, make sure that:
• The control card is inserted in the correct
direction.
• The control card is inserted as far as it can go.
• An unusable control card is not inserted. (For
example, cards which are damaged or cards
prohibited from use.)
– Insert a usable control card correctly.
Procedure after Using the
Machine
1
After you finish using the
machine, remove the control
card.
Procedure before Using
the Machine
1
Insert the control card into the
card slot, making sure that it is
facing in the correct direction.
The display returns to the screen for
inserting the control card.
NOTE
System Manager Settings
Once you have removed the control card, you
cannot operate the machine until the control card is
inserted again.
The standby display appears.
11-3
System Manager Settings
11-4
Maintenance
Maintenance
Cleaning the Machine
Note the following before cleaning
your machine:
– Make sure no document is stored in
memory, then turn off the main
power switch and disconnect the
power cord.
– If the main power switch is turned
OFF, all jobs waiting in the print
queue will be erased.
– Sending or receiving documents
cannot be done when the main
power switch is OFF.
– Use a soft cloth to avoid scratching
the components.
– Do not use tissue paper, paper
towels, or similar materials for
cleaning; they can stick to the
components or generate static
charges.
CAUTION
Never use volatile liquids such as thinners,
benzene, acetone, or any other chemical cleaner to
clean the machine. These can damage the
machine components.
12-1
Exterior
1
2
3
Turn off the main power switch
and disconnect the power cord.
Wipe the machine’s exterior with
a clean, soft, lint-free cloth
dampened with water or diluted
dishwashing detergent solution.
Wait for the machine to dry, then
reconnect the power cord and
turn on the main power switch.
Fuser Roller
4
If black streaks appear with printing, the
fuser roller in the main unit may be dirty.
Should this occur, clean the fuser roller in
the following procedure. The roller should
also be cleaned each time the toner
cartridge is replaced. Load a sheet of
blank LTR paper into the stack bypass
and start cleaning.
Pull out the stack bypass
extension until it clicks, then
open it.
NOTE
Cleaning the roller takes approximately 100
seconds.
1
2
Load a sheet of blank LTR paper.
Press [Additional Functions].
Press [
] or [
] to select
<ADJUST./CLEANING>, then
press [OK].
Open the stack bypass.
6
Press [
] or [
] to select
<FIX. UNIT CLEANING>, then
press [OK].
Cleaning starts. When finished, the display
returns to the standby mode.
NOTE
– Use standard paper as the cleaning
paper.
– Throw away the cleaning paper after use.
12-2
Maintenance
3
5
Scanning area
3
Keep the scanning area clean to avoid
dirty copies or faxes to be sent.
Close the ADF/platen glass
cover.
● Platen glass
1
Open the ADF/platen glass
cover.
CAUTION
Be careful not to get your fingers caught.
● ADF
2
Clean the platen glass and the
underside of the ADF/platen
glass cover with a cloth
dampened with water. Then wipe
the area with a soft, dry cloth.
If your documents have black streaks or
appear dirty after copying them using the
ADF, this may be caused by pencil lead
rubbing off the documents and onto the
roller. Clean the ADF scanning area, film,
and roller.
1
Maintenance
2
NOTE
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.
12-3
Turn off the main power switch
and disconnect the power cord.
Open the ADF cover.
3
Clean the rollers and rubber
parts (A) inside the ADF cover
with a cloth dampened with
water. Then wipe the area with a
soft, dry cloth.
5
Clean the rollers (B) below the
document feeder tray with a
cloth dampened with water.
Then wipe the area with a soft,
dry cloth.
A
B
NOTE
6
Lower the document feeder tray.
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.
4
Lift the document feeder tray.
CAUTION
Be careful not to get your fingers caught.
Maintenance
12-4
7
Close the ADF cover.
9
Clean the ADF scanning area (on
the left side of the platen glass)
and the document feeding roller
with a cloth dampened with
water. Then wipe the area with a
soft, dry cloth.
CAUTION
Be careful not to get your fingers caught.
8
Open the ADF/platen glass
cover.
10
Close the ADF/platen glass
cover.
CAUTION
Maintenance
Be careful not to get your fingers caught.
11
12-5
Reconnect the power cord and
turn on the main power switch.
Cleaning the ADF Automatically
If your documents have black streaks or appear dirty after scanning them through the
ADF, clean the ADF roller by repeatedly feeding blank sheets of paper through it.
1
2
3
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
JKL
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
Press [Additional Functions].
2
Press [
] or [
] to select <ADJUST./CLEANING>, then press [OK].
3
Press [
] or [
] to select <FEEDER CLEANING>, then press [OK].
4
Load 5 sheets of blank paper into the ADF, then press [OK].
Maintenance
1
ADF cleaning starts. When finished, the display returns to the standby mode.
NOTE
Use LTR paper.
12-6
Transcription Roller
If the back of the paper is smudged after printing, the transcription roller may be dirty.
Clean the transcription roller in the following procedure.
1
2
3
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
Press [Additional Functions].
2
Press [
3
Confirm that <TRANS. ROLR CLEAN> is displayed, then press [OK].
] or [
] to select <ADJUST./CLEANING>, then press [OK].
Maintenance
Cleaning starts. When finished, the display returns to the standby mode.
12-7
Drum Unit
If print quality decreases, the drum in the main unit may be dirty. Should this occur, use
the Drum Cleaning function to clean the drum.
1
2
3
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
3
Press [Additional Functions].
Press [
] or [
] to select <ADJUST./CLEANING>, then press [OK].
Press [
] or [
] to select <DRUM CLEANING>, then press [OK].
Cleaning starts. When finished, the display returns to the standby mode.
Maintenance
12-8
Replacing the Toner Cartridge
When toner runs out completely and
prints can no longer be made, the
message <OUT OF TONER/CHANGE
TONER> appears on the LCD display.
Follow the procedure described below
to help you replace the toner cartridge.
1
2
Pull the toner cartridge lever (A)
towards you.
Open the front cover.
A
CAUTION
Do not pull the toner cartridge out until the
message <OUT OF TONER/CHANGE
TONER> appears on the LCD display.
Maintenance
3
12-9
Turn the lever as far as it will go
clockwise.
4
Pull the cartridge out of the
machine.
6
Open the case and remove the
toner cartridge. Keep the box
and case for future use.
CAUTION
Do not shake the used toner cartridge or
hold it in a vertical position. Doing so may
cause the toner to spill. Put the toner
cartridge in the original plastic case for
disposal.
CAUTION
– Do not touch the portions (A), and (B).
– Do not pull out the seal (C) before
inserting the cartridge into the machine
as the toner may spill out.
A
C
B
5
Remove the plastic case from
the box.
Maintenance
12-10
7
Pull the toner cartridge lever (A)
towards you and insert the
cartridge into the machine with
the arrow (B) pointing towards
the machine.
9
Turn the toner cartridge lever as
far as it will go counterclockwise.
B
10
Push down the lever.
11
Close the front cover.
A
Holding the cartridge steady
with one hand, pull out the seal
completely with the other hand.
Maintenance
8
NOTE
Do not pull out the seal at an angle.
CAUTION
– Be careful not to get your fingers caught.
– If you cannot close the front cover, do not
force it to close. Open the front cover and
pull out the toner cartridge, then reinsert
the cartridge into the machine.
12-11
Replacing the Drum Unit
When the message <REPLACE THE
DRUM> appears on the LCD display,
replace the drum unit.
2
Holding the grips on the drum
unit, slightly lower and remove it
from the machine.
WARNING
Do not throw used drum unit into open flames, as
they may ignite the toner remaining inside the unit,
and result in burns or a fire.
CAUTION
If you use the machine without inserting the drum
unit, <INSERT THE DRUM> appears on the LCD
display. In this case, turn OFF the main power, and
install the drum unit into the machine.
1
CAUTION
Open the left cover.
Do not touch the fixing assembly as it
becomes very hot during use.
3
Open the package of the new
drum unit and remove the
protective packing material (A).
A
Maintenance
12-12
4
Hold the unit by its grips on both
sides.
5
Align the marks on both sides
of the drum unit (B) with the
marks on the machine (A), and
push the unit into the machine
as far as it will go.
6
7
After the unit is completely
inserted, remove the orange
paper.
Close the left cover.
A
A
CAUTION
B
B
Maintenance
CAUTION
– Be careful not to get your fingers caught.
– Do not touch the portion (A) as the
image quality of printouts may
deteriorate.
Do not touch the fixing assembly as it
becomes very hot during use.
A
12-13
Transporting the Machine
Follow this procedure to avoid
vibration damage to the machine when
transporting it over a long distance.
CAUTION
Be sure at least two people carry the machine.
1
2
3
Disconnect the power cord and
all the cables from the back of
the machine.
CAUTION
– Be sure at least two people carry the
machine.
– Do not lift the machine by any of its
attachments. Dropping the machine can
cause personal injury.
– If you have a back problem, make sure
to check the weight of this machine
before carrying. (See “Specifications,”
on p. 15-1.)
Make sure the stack bypass and
the paper stopper are back in
their original position.
Pick up the machine using the
provided hand grips on the left
and right sides.
Maintenance
12-14
Troubleshooting
Clearing Jams
When a jam occurs in the machine, the
paper jam message appears on the
LCD display. Check the jam location
indicator where the jam occurs, then
remove the jammed paper.
1
Open the ADF cover.
CAUTION
– When removing jammed documents or paper,
take care not to cut your hands on the edges of
the document or paper.
– When removing jammed paper or when
inspecting the inside of the machine, do not allow
necklaces, bracelets, or other metal objects to
touch the inside of the machine, as this may
result in burns or electrical shock.
2
Remove any jammed
documents.
NOTE
Do not force a jammed document or paper out of
the machine. Contact your local authorized Canon
dealer for assistance if needed.
Troubleshooting
Document Jams
When <CHECK DOCUMENT> or
<DOCUMENT TOO LONG> appears on
the LCD display, remove a jammed
document from the ADF or the document
delivery slot.
13-1
NOTE
Do not pull the document forcefully as it
may tear.
3
4
5
Lift the document feeder tray.
Remove any jammed
documents.
6
7
Open the ADF/platen glass
cover, and remove any jammed
documents.
Close the ADF/platen glass
cover.
Lower the document feeder tray
and close the ADF cover.
CAUTION
CAUTION
Be careful not to get your fingers caught.
13-2
Troubleshooting
Be careful not to get your fingers caught.
Paper Jams
2
● Inside the Machine or Paper
Drawer
When <PAPER JAM> appears on the
LCD display, remove jammed paper from
inside the machine first, then from the
paper drawer if necessary. Check the
following if you experience repeated
paper jams:
– Even the edge of the paper stack by a
flat surface before loading it in the
machine.
– Check that the paper you are using
meets the requirements for use. (See
“Print Media,” on p. 3-1.)
– Make sure you have removed any
scraps of paper from inside the
machine.
Troubleshooting
1
Open the left cover.
Carefully pull the jammed paper
out of the machine.
A
CAUTION
– Do not touch the fixing assembly (A) as it
becomes very hot during use.
– If you tear the paper, remove any torn
pieces to avoid further jams.
– If loose toner comes into contact with
your skin or clothing, wash with cold
water. Warm water will set the toner.
3
Tilt the 2-sided transport guide
(A) toward the machine, then
remove the jammed paper (Only
for 2-sided copying).
A
13-3
4
Lift and hold the transcription
frame (A), then remove the
jammed paper (Only for 2-sided
copying).
6
If you use the optional paper
drawer, open the cover on the
left side of the optional paper
drawer. Remove any jammed
paper, then close the cover.
A
5
Close the left cover.
7
Pull out the paper drawer and
push the corners of the stack
under the tabs.
CAUTION
Be careful not to get your fingers caught.
Troubleshooting
13-4
8
Gently push the paper drawer
back into the machine until it
clicks.
CAUTION
Be careful not to get your fingers caught.
● Inside the Stack Bypass
1
Troubleshooting
2
Remove all paper from the stack
bypass.
Remove any jammed paper.
NOTE
If you cannot remove the jammed paper,
follow the procedures in “Inside the
Machine or Paper Drawer,” on p. 13-3.
13-5
LCD Messages
See the table below when the LCD displays error messages.
Message
Description
Action
ADJUSTING
WAITING TO SCAN
The machine is not ready for
scanning.
Wait until the machine is
ready.
AUTO REDIAL
This message appears when
the recipient is engaged in
direct sending and the job is
waiting.
Disappears when the
transmission restarts.
CHANGE PAPERSIZE
The size of the paper in the
paper drawer or stack
bypass is different from that
of the paper specified in
<REG. PAPER SIZE> or
<BYPASS STD SET> in the
<COMMON SETTINGS>
menu.
– Load the paper of the size
shown on the LCD display.
– If you are trying to print a
report or list, set the paper
size to <LTR> or <LGL>,
then load paper of the
same size.
CHANGE REG’D SIZE
→COMMON SETTINGS
– The size of the paper in
the paper drawer or stack
bypass is different from
that of the paper specified
in <REG. PAPER SIZE>
or <BYPASS STD SET>
in the <COMMON
SETTINGS> menu.
– The paper ran out during
the print job.
– Change the paper size
setting.
– Load paper in the paper
drawer or stack bypass.
Troubleshooting
13-6
Message
Description
Action
A document jam may have
occurred in the ADF.
Remove the jammed
document.
CLOSE COVER
FRONT OR LEFT COVER
A cover is open.
Close the cover shown on
the lower line of the LCD
display.
DATA ERROR
The machine may have
trouble.
Contact your local
authorized Canon dealer.
DOCUMENT TOO LONG
The document fed from the
ADF is longer than 24 7/8"
(630 mm), or is not feeding
correctly.
– Scan the document on the
platen glass.
DRUM IS NOT SET
INSERT THE DRUM
A drum unit is not installed
or not installed correctly.
Install the drum unit
correctly.
FEEDER PAPER JAM
CHECK THE FEEDER
A document jam may have
occurred in the ADF.
Remove the jammed
document.
INITIALIZING...
This message appears when
turning on the main power
switch, or when the machine
is not ready for printing.
Wait until the message
disappears.
LOAD PAPER
No paper is loaded in the
paper drawer or stack
bypass, or not inserted
correctly.
Insert the paper drawer as
far as it will go or load paper.
MEM IN USE nn%
This message shows the
percentage of the memory
currently in use. This
message is displayed when
you set the document in the
ADF to send a fax.
If you need more space, wait
for the machine to send any
documents in memory. Also
print, send, or delete any
documents stored in
memory.
Troubleshooting
CHECK DOCUMENT
13-7
– Reduce the length of the
document to within 24 7/8"
(630 mm), then try again.
Message
MEMORY FULL
Description
Action
– Print, send, or delete any
documents stored in
memory.
– Divide the document stack
or data into a few parts
and try again one by one.
– Send the document with
low resolution.
– When this message
appears during using the
ADF, the scanning
document stops halfway.
In this case, clear the
paper jam from the ADF.
– The number of TX/RX
jobs that can be stored in
memory reached the
maximum.
– The maximum numbers of
jobs that can be stored in
memory are as follows
(Based on the condition
that the other party sends
the fax by the image
RUNNER 1023iF with
ITU-T No.1 Chart
standard mode);
Up to 70 jobs for sending
or 90 jobs for receiving, or
95 fax jobs including
sending and receiving
jobs.
Wait for the machine to
send any documents in
memory. Also print, send,
or delete any documents
stored in memory.
13-8
Troubleshooting
– The machine is full of
jobs.
Troubleshooting
Message
Description
Action
NO APPROPRIATE SIZE
Although <PAPER SELECT>
is set to <AUTO> in
<STANDARD SETTINGS> in
the <COPY SETTINGS>
menu, appropriate-sized
paper is not set in the paper
drawer or stack bypass.
Select the paper size, or set
the copy ratio.
NOT AVAILABLE NOW
– You pressed the onetouch key or coded dial
code that has already
been registered, when
you are registering
favorites buttons, onetouch keys, coded dial
codes, or group
addresses.
– You have specified the
group dialing when the
line is off the hook.
– Register the one-touch
key or coded dial code
that is not used.
NOT REGISTERED
No destination is registered
for the one-touch key or
coded dial code you
pressed.
Register the destinations
before using the Address
Book function.
OUT OF TONER
CHANGE TONER
– A toner cartridge is not
installed or not installed
correctly.
– The toner ran out
completely.
– Install the toner cartridge
correctly.
OUTPUT TRAY FULL
The paper delivery tray is full
of paper.
Remove the printouts from
the paper delivery tray.
PAPER JAM
Paper jams have occurred in
the machine.
Remove the jammed paper.
The cover must be opened
and closed to resume the
current job.
13-9
– Specify the recipient other
than group dialing.
– Replace the toner
cartridge.
Message
Description
Action
PLATEN GLASS DIRTY
CLEAN PLATEN GLASS
The ADF scanning area on
the left side of the platen
glass may be dirty.
Clean the ADF scanning
area, then press [OK].
RECEIVED IN MEMORY
The machine received the
fax/I-fax in memory because
paper or toner ran out, paper
jams occurred, or incorrectsize paper was loaded.
Load the correct-size paper
in the paper drawer, replace
the toner cartridge, or clear
the paper jams. For more
information, see the
following:
“Setting Paper Type and
Size,” on p. 3-8
“Replacing the Toner
Cartridge,” on p. 12-9
“Clearing Jams,” on p. 13-1
START AGAIN
– A transmission error
occurred because the line
condition was poor.
– The paper jammed or ran
out during printing a
report.
– Check the line condition,
then try again.
[Stop] has been pressed
while scanning the
document using the ADF.
Press [OK], then set the
document again.
STOP KEY PRESSED
PRESS OK KEY
– Clear the paper jam, or
replenish the paper, then
try again.
Troubleshooting
13-10
Message
Description
Action
Some kind of error has
occurred in the machine.
Turn off the main power
switch, wait for more than 10
seconds, then turn it on
again. If the message
persists, unplug the machine
from the power supply and
contact your local authorized
Canon dealer.
TONER LOW
PREPARE NEW TONER
The toner is running low.
Prepare a new toner
cartridge.
TRANSMITTING...
During the current
transmission, the machine
may have tried to send a
document identified from the
list of documents in memory.
Wait until the transmission
from memory is complete.
WASTE TONER FULL
REPLACE THE DRUM
The drum unit is filled with
waste toner.
Replace the drum unit. (See
“Replacing the Drum Unit,”
on p. 12-12.)
Troubleshooting
SYSTEM ERROR
13-11
Error Codes
An error code is a four-digit code shown on an ERROR TX REPORT or an ERROR
RX REPORT when an error occurs.
12/31/2006
10:50 FAX 123XXXXXX
CANON
0001
***************************
***
ERROR TX REPORT
***
***************************
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
DEPT. ID
RECIPIENT ADDRESS
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
0005
0000001
111XXXXX
12/31 10:50
00'00
0
NG
# 0018 BUSY/NO SIGNAL
Error Code
For details on reports, see Chapter 7, “Reports and Lists,” in the Advanced Operation
Guide.
See the table below for individual error codes.
Error Code
Description
Action
A document may be jammed.
Remove the jammed document.
#0003
– An attempt was made to send a
document of 24 7/8" (630 mm) or
longer from the ADF.
– A document takes a long time to
send because it contains too
much data.
– A document takes a long time to
receive.
– Divide the document into smaller
parts and send from the platen
glass.
– Reduce the scanning resolution
before sending.
– Contact the other party and ask
them to reduce their scanning
resolution or divide the document
into smaller parts for sending.
13-12
Troubleshooting
#0001
Error Code
– The other party may not be using
a G3 fax machine.
#0009
The paper has run out or the paper
drawer is not set properly.
Load the paper or reset the paper
drawer properly.
#0012
You could not send because the
recipient’s machine is out of paper.
Contact the recipient and ask them
to load the paper.
#0018
There is no reply when you redial.
You could not send, because your
fax signal was not returned as the
recipient’s line was engaged.
Check that the recipient’s line is not
engaged and try again from the
beginning.
#0037
The memory is full.
Print, send, or delete any
documents stored in memory.
#0703
The memory for image data is full
when sending color documents.
– Wait a few moments, and then try
sending again after other send
jobs are complete.
– Erase documents stored in
memory. If the machine still does
not operate normally, turn the
main power OFF, and then back
ON.
13-13
– The other fax machine did not
respond within 35 seconds.
Action
– Send the document again.
Contact the other party and have
them check their fax machine. If
you are making an overseas call,
add a pause to the number.
– Check with the other party and
send the document to a
G3 fax machine. If the other party
does not have a G3 fax machine,
try sending your document using
a transmission mode the other
party’s fax machine supports.
Troubleshooting
#0005
Description
Error Code
Description
Action
#0705
The send operation was interrupted
because the size of the image data
is larger than that specified in <MAX
TX DATA SIZE> in <E-MAIL/I-FAX>
in <COMMUNICATIONS> in
<SYSTEM SETTINGS>.
– Change the setting for <MAX TX
DATA SIZE> in <E-MAIL/I-FAX>
in <COMMUNICATIONS> in
<SYSTEM SETTINGS>.
– Select a lower resolution.
– If you are using I-fax, decrease
the number of pages containing
images that you are sending each
time, so that you do not exceed
the Maximum TX Data Size.
– Set <DIVIDE INTO PAGES> to
<ON> in send settings.
#0751
The server is not functioning. The
network is down (the server is
unable to connect to the network or
was disconnected).
– Check the recipient’s address.
– Check that the network is up.
#0752
– The SMTP server name for e-mail
or I-fax is not correct, or the
server is not functioning.
– Check the SMTP Server name,
domain name, and E-mail
Address in <E-MAIL/I-FAX> in
<NETWORK SETTINGS> in
<SYSTEM SETTINGS>.
– Check that the SMTP server is
operating properly.
– Check the network status.
– The domain name or e-mail
address may not be set.
– The network is down.
#0753
A TCP/IP error occurred while
sending an e-mail message.
(Socket, Select error, etc.)
Check the network cables and
connectors. If the machine still does
not operate normally, turn the main
power OFF, and then back ON.
Troubleshooting
13-14
Error Code
#0755
Description
– You cannot send jobs because
TCP/IP is not functioning
correctly.
– The IP address is not set.
– When the machine was turned
ON, an IP address was not
assigned to the machine by the
DHCP, RARP, or BOOTP server.
Troubleshooting
#0801
13-15
– A timeout error occurred while the
machine was communicating with
the SMTP server to send an email message or send/receive an
I-fax.
– The SMTP server returned an
error while trying to connect. The
destination is not correct. An error
occurred on the server side
during transmission to a file
server.
Action
– Check <TCP/IP SETTINGS> in
<NETWORK SETTINGS> in
<SYSTEM SETTINGS>.
– Check <TCP/IP SETTINGS> in
<NETWORK SETTINGS> in
<SYSTEM SETTINGS>.
– Check <TCP/IP SETTINGS> in
<NETWORK SETTINGS> in
<SYSTEM SETTINGS>. Or wait
a while, and then try sending
again.
– Check that the SMTP server is
functioning normally, or check the
network status.
– Check that the SMTP server is
functioning normally. Check the
network status. Check the
destination setting. Check the
status and setting of the file
server.
Error Code
Description
Action
#0802
– The name of the SMTP Server in
<E-MAIL/I-FAX> in <NETWORK
SETTINGS> in <SYSTEM
SETTINGS> is incorrect.
– The DNS server name in <DNS
SETTINGS> in <TCP/IP
SETTINGS> in <NETWORK
SETTINGS> in <SYSTEM
SETTINGS> is incorrect.
– Connection to the DNS server
failed.
– Check the name of the SMTP
Server in <E-MAIL/I-FAX> in
<NETWORK SETTINGS> in
<SYSTEM SETTINGS>.
– Check the DNS server name in
<DNS SETTINGS> in <TCP/IP
SETTINGS> in <NETWORK
SETTINGS> in <SYSTEM
SETTINGS>.
– Check that the DNS server is
functioning normally.
#0804
You have no permission to access
the folder.
Change the setting on the server to
enable access to the folder.
#0806
– An incorrect user name or
password was specified for the
sending of a file to a file server.
– An incorrect destination was
specified for the sending of an email message or I-fax.
– Change the user name or
password.
– Check the e-mail or I-fax address.
#0808
– A timeout error occurred while the
machine was communicating with
the FTP server.
– The FTP server returned an error
while trying to connect. The
destination is not correct. An error
occurred on the server side
during transmission.
– Check that the FTP server is
functioning normally. Check the
network status.
– Check that the FTP server is
functioning normally. Check the
network status. Check the
destination setting. Check the
status and setting of the file
server.
Troubleshooting
13-16
Description
Action
#0810
– A POP (Post Office Protocol)
server connection error occurred
while receiving an I-fax.
– The POP server returned an error
during the connection.
– A timeout error occurred on the
server while connecting to the
POP server.
Check the POP Server name in <EMAIL/I-FAX> in <NETWORK
SETTINGS> in <SYSTEM
SETTINGS>. Confirm that the POP
server is functioning normally.
Check the network status.
#0812
The POP password setting is
incorrect.
Check the POP Server password in
<E-MAIL/I-FAX> in <NETWORK
SETTINGS> in <SYSTEM
SETTINGS>.
#0813
The POP Server name setting is
incorrect.
Check the POP Server name in <EMAIL/I-FAX> in <NETWORK
SETTINGS> in <SYSTEM
SETTINGS>.
#0819
You have received data that cannot
be processed (MIME information is
incorrect).
Check the settings, and then ask the
sender to resend the data.
Troubleshooting
Error Code
13-17
Error Code
Description
Action
#0820
You have received data that cannot
be processed (BASE 64 or
uuencode is incorrect).
Check the settings, and then ask the
sender to resend the data.
#0821
You have received data that cannot
be processed (TIFF analysis error).
Check the settings, and then ask the
sender to resend the data.
#0827
You have received data that cannot
be processed (contains MIME
information that is not supported).
Check the settings, and then ask the
sender to resend the data.
#0828
You have received HTML data.
Ask the sender to use a file format
other than HTML, and then resend
the data.
#0829
Data containing more pages that the
machine can hold in the memory is
received.
Print the received documents, and
ask the sender to resend the
remaining pages.
#0995
Communication reservation is
cleared.
If necessary, try again from the
beginning.
Troubleshooting
13-18
If a Power Failure Occurs
Troubleshooting
If power is suddenly lost due to an outage or accidental unplugging, a built-in
battery retains the user data settings and the Address Book settings. Any sent
or received documents stored in memory are backed up for about 60 minutes.
During a power cut, functions are limited as follows:
– You cannot send, receive, copy, scan, or print documents.
– You may not be able to make telephone calls using an external telephone,
depending on the type of telephone you use.
– You can receive telephone calls using an external telephone depending on the type
of telephone you use.
13-19
Service Call Message
If the machine malfunctions, service call messages appear on the LCD display.
• E000
• E100
• E716
• E001
• E196
• E719
• E002
• E197
• E730
• E003
• E246
• E733
• E007
• E247
• E736
• E010
• E350
• E739
• E019
• E354
• E805
• E052
• E355
• E808
Contacting Your Local Authorized Canon Dealer
If a malfunction occurs and the machine cannot operate normally, service call
messages appear on the LCD display. Follow the procedure described on the next
page to solve the problem.
If you turn OFF the main power when there is any stored job, its data will be deleted.
WARNING
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.
CAUTION
13-20
Troubleshooting
Always grasp the power plug portion when disconnecting the power cord. Pulling on the cord portion may
expose or snap the core wire, or otherwise damage the power cord. If the power cord is damaged, this
could cause an electricity leak and result in a fire or electrical shock.
1
2
Turn the main power switch OFF. Allow at least ten seconds before turning
the main power switch back ON.
If the machine still does not operate normally, follow the procedure below,
and contact your local authorized Canon dealer.
– Turn OFF the main power.
– Disconnect the power cord from the wall outlet.
NOTE
Troubleshooting
When contacting your local authorized Canon dealer, check the following:
– Model name
– Problem and status of the machine
– Error code on the LCD display
13-21
Troubleshooting
13-22
Machine Settings
Machine Settings
You can adjust the machine settings from the Setting Menu to customize the way
the machine works. To see the list of the current settings, print out USER’S DATA
LIST.
Printing USER’S DATA LIST
1
COPY
ded
al
Address
Book
04
M4
2
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
Machine Settings
[OK]
1
2
14-1
Press [Additional Functions].
Press [
] or [
] to select <REPORT SETTINGS>, then press [OK].
3
4
COPY
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
08
2
ABC
@./
GHI
Collate
2
JKL
4
Paper
Select
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
3
4
Press [
] or [
] to select <LIST PRINT>, then press [OK].
Press [
] or [
] to select <USER DATA LIST>, then press [OK].
Machine Settings
14-2
Accessing the Setting Menu
1
COPY
2
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
1
Reset
2
JKL
GHI
Collate
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
2
4
Paper
Select
08
ABC
@./
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
WXYZ
TUV
7
Clear
9
8
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
1
2
Press [Additional Functions].
Press [
[OK].
] or [
] to select the menu you want to access, then press
<COMMON SETTINGS>
<COPY SETTINGS>
<TX/RX SETTINGS>
<ADDRESS BOOK SET.>
<PRINTER SETTINGS>
<TIMER SETTINGS>
<ADJUST./CLEANING>
<REPORT SETTINGS>
<SYSTEM SETTINGS>
NOTE
Machine Settings
The menus described above are based on the imageRUNNER 1023iF.
14-3
COPY
3
ded
al
Address
Book
04
M4
SEND
SCAN
View
Settings
System
Monitor
ABC
@./
1
Reset
GHI
Collate
2
JKL
4
Paper
Select
08
2
Image Quality
Additional
Functions
OK
Density
Copy Ratio
Two-Sided
2 on 1
DEF
PQRS
3
MNO
Counter
Check
ON/OFF
C
Stop
Log In/Out
6
5
ID
Start
5
WXYZ
TUV
7
Clear
8
9
SYMBOLS
Frame Erase
0
#
Processing/
Data Error Power
Tone
[OK]
3
Press [
] or [
] to select a submenu, then press [OK].
NOTE
For details on the submenu, see “Setting Menu,” on p. 14-5.
4
5
To register the settings or go to a submenu item, press [OK].
When finished, press [Stop] to return to the standby mode.
NOTE
– If you press [Stop] before pressing [OK], the setting will not be registered.
– Press [Additional Functions] to return to the previous display.
Machine Settings
14-4
Setting Menu
The menus described in this section are based on the imageRUNNER 1023iF.
Depending on the model of your machine, some settings may not be available
and the number on the top of each menu may vary.
COMMON SETTINGS
Setting Item
Description
1. DEFAULT SETTINGS
Selects which standby display appears when turning on the
power.
– COPY
– SEND
– SCAN
2. AUTO CLEAR SET.
Selects which standby display appears after the Auto
Clearing function is activated.
INITIAL FUNCTION
Sets to return standby display that is selected in <DEFAULT
SETTINGS>.
SELECTED FUNCTION
Sets to return standby display of the current mode.
3. AUDIBLE TONES
Machine Settings
1. ENTRY TONE
14-5
Sets whether to sound audible tones and adjusts their
volume.
Beeps when pressing the keys on the operation panel.
– ON (1-3)
– OFF
COMMON SETTINGS
2. ERROR TONE
Beeps when an error (e.g., paper jam) occurs.
– ON (1-3)
– OFF
3. TX JOB DONE TONE
Beeps when a document is sent.
– ERROR ONLY (1-3)
– OFF
– ON (1-3)
4. RX JOB DONE TONE
Beeps when a document is received.
– ERROR ONLY (1-3)
– OFF
– ON (1-3)
5. SCAN DONE TONE
Beeps when scanning is completed.
– ERROR ONLY (1-3)
– OFF
– ON (1-3)
6. PRINT DONE TONE
Beeps when printing is completed.
– ERROR ONLY (1-3)
– OFF
– ON (1-3)
4. TONER SAVER MODE
Sets whether to reduce toner consumption.
– OFF
– ON
5. PRINTER DENSITY
Recalibrates the density adjustment scale if differences
between the image in the document and the print occur.
(1-9)
Machine Settings
14-6
COMMON SETTINGS
6. AUTO DRAWER SELCT
Sets whether to change to another paper source of the
same size if the current paper source runs out while
processing a job. Sets whether to select the appropriate
paper source based on the original’s size and copy ratio
settings (when making a copy), or the set ratio of the image
(when receiving a fax).
1. COPY
Sets whether to activate the Auto Drawer Select function
when copying.
– 1. DRAWER 1 (ON/OFF)
– 2. DRAWER 2 (ON/OFF)*
– 3. STACK BYPASS (OFF/ON)
2. PRINTER
Sets whether to activate the Auto Drawer Select function
when printing.
– 1. DRAWER 1 (ON/OFF)
– 2. DRAWER 2 (ON/OFF)*
3. RECEIVE
Sets whether to activate the Auto Drawer Select function
when receiving fax/I-fax documents.
– 1. DRAWER 1 (ON/OFF)
– 2. DRAWER 2 (ON/OFF)*
– 3. STACK BYPASS (OFF/ON)
4. OTHER
Sets whether to activate the Auto Drawer Select function
when printing a report or list.
– 1. DRAWER 1 (ON/OFF)
– 2. DRAWER 2 (ON/OFF)*
– 3. STACK BYPASS (OFF/ON).
7. SELECT PAPER TYPE
Sets the paper type for the paper drawer. (See “For the
Paper Drawer,” on p. 3-8.)
Sets the paper type for paper drawer 1.
2. DRAWER 2*
Sets the paper type for paper drawer 2.
Machine Settings
1. DRAWER 1
14-7
COMMON SETTINGS
8. REG. PAPER SIZE
Sets the paper size for the paper drawer. (See “For the
Paper Drawer,” on p. 3-8.)
1. DRAWER 1
Sets the paper size for paper drawer 1.
2. DRAWER 2*
Sets the paper size for paper drawer 2.
9. ENERGY IN SLEEP
Selects power consumption when the machine is in the
Sleep mode between two levels.
– LOW
– HIGH
10.BYPASS STD SET
Sets the standard paper size and type for the stack bypass if
you always use a same kind of paper. (See “For the Stack
Bypass,” on p. 3-11.)
OFF
Deactivates the stack bypass standard settings.
ON
Activates the stack bypass standard settings.
1. PAPER SIZE
Sets paper size as the stack bypass standard.
2. SELECT PAPER
TYPE
Sets paper type as the stack bypass standard.
11.PAPER FEED SWITCH
1. STACK BYPASS
Selects the paper feed method when you want to make onesided or two-sided prints on preprinted paper (paper which
has logos or patterns already printed on it).
Selects the paper feed method for the stack bypass.
SPEED PRIORITY
Print speed has priority.
PRINT SIDE
The machine starts printing on the side of paper loaded
facing up. Print speed becomes slower for one-sided print.
Only available for LTR, LGL and A4.
Machine Settings
14-8
COMMON SETTINGS
2. DRAWER 1
Selects the paper feed method for paper drawer 1.
SPEED PRIORITY
Print speed has priority.
PRINT SIDE
The machine starts printing on the side of paper loaded
facing down. Print speed becomes slower for one-sided
print.
3. DRAWER 2*
Selects the paper feed method for paper drawer 2.
SPEED PRIORITY
Print speed has priority.
PRINT SIDE
The machine starts printing on the side of paper loaded
facing down. Print speed becomes slower for one-sided
print.
12.DISPLAY LANGUAGE
Selects the language on the display. (See “Specifications,”
on p. 15-1.)
13.ADF DIRTY ERROR
Sets whether the error message will appear when the ADF
is dirty.
– DISPLAY
– DO NOT DISPLAY
14.INIT. COMMON SET.
Restores all <COMMON SETTINGS> to the default except
for <DISPLAY LANGUAGE>.
– OFF
– ON
Machine Settings
* Only for users of the optional paper drawer
14-9
COPY SETTINGS
Setting Item
1. IMAGE DIR PRIORTY
Description
Sets whether to activate the image direction priority.
OFF
Copy orientation is same as the document.
ON
Copy orientation is rotated at 180 degrees.
2. STANDARD SETTINGS
Sets the default setting for copying.
1. IMAGE QUALITY
Sets the document type for copying.
– TEXT
– PHOTO
– TEXT/PHOTO
2. DENSITY
Sets the density for copying.
– AUTO
– MANUAL (1-9)
3. ZOOM RATIO
Sets the zoom ratio for copying.
PRESET RATIO
Selects the zoom from the preset ratios.
(100%, 115% B5→A4, 122% A5→B5, 129% STMT→LTR,
141% A5→A4, 200% MAX., 50% MIN., 64%, 70% A4→A5,
78% LGL→LTR, 81% B5→A5, 86% A4→B5)
MANUAL
Enters the zoom ratio by 1% increments. (50%–200%)
4. COPIES
Sets the number of copies (1-99).
5. AUTO COLLATE
Sets whether to collate the copies automatically.
– OFF
– COLLATE
Machine Settings
14-10
COPY SETTINGS
6. TWO-SIDED
Sets the type of two-sided copying.
– OFF
– 1 > 2-SIDED
– 2 > 2-SIDED
– 2 > 1-SIDED
7. FRAME ERASE
Sets the type of Frame Erase copying.
– OFF
– ORG. FRAME ERASE
– BOOK FRAME ERASE
– BINDING HOLE
8. PAPER SELECT
Sets the paper source for copying.
– AUTO
– DRAWER 1
– DRAWER 2*
3. SHARPNESS
Adjusts the sharpness of the copied image. (1-9)
4. PAPER SIZE GROUP
Selects a paper size group for your machine.
– INCHES
– A
– AB
5. MM/INCH ENTRY
Sets the unit of measurement of the frame erase width.
– INCHES
– MM
6. INIT. COPY SET.
Restores all <COPY SETTINGS> to the default.
– OFF
– ON
Machine Settings
* Only for users of the optional paper drawer
14-11
TX/RX SETTINGS
Setting Item
1. COMMON SETTINGS
1. TX SETTINGS
Description
Sets the features common to the fax and send functions.
Sets the transmission features.
1. UNIT NAME
Registers your name/company name (max. 24 characters,
including spaces). (See “Set the Machine for Sending
Faxes,” in the Quick Start Guide.)
2. DATA
COMPRESSION
Sets the compression ratio for color scanned data. A high
compression ratio reduces the amount of memory used for
the document, but results in low quality images. On the
contrary, a low compression ratio increases the amount of
memory used for the document, but results in high quality
images.
– NORMAL
– HIGH RATIO
– LOW RATIO
3. RETRY TIMES
Sets the number of retry attempts for sending jobs to an
e-mail, I-fax, or file server address. (0-5) (See Chapter 1,
“Advanced Send Features,” in the Advanced Operation
Guide.)
4. SCANNING
DENSITY
Adjusts the scanning density for sending documents. (1-9)
5. STANDARD
SETTINGS
Sets the default settings for sending documents.
1. DENSITY
Sets the default density for the document you send.
– STANDARD
– DK
– LT
Machine Settings
14-12
TX/RX SETTINGS
2. IMAGE QUALITY
Sets the default image quality for the document you send.
(200x200dpi, 200x400dpi, 300x300dpi, 400x400dpi,
600X600dpi, 100X100dpi, 150X150dpi, 200x100dpi)
3. IMAGE FORMAT
Sets the default file format for the document you send.
– PDF
– TIFF (B&W)
– PDF (COMPACT)
– JPEG
4. ORIGINAL TYPE
Sets the default original type for the document you send.
– TEXT/PHOTO
– TEXT
– PHOTO
5. DIVIDE INTO
PAGES
Sets whether to use <DIVIDE INTO PAGES> as default.
– OFF
– ON
6. DIRECT TX
Sets whether to use <DIRECT TX> as default.
– OFF
– ON
Machine Settings
6. SEND SETTINGS
14-13
Sets the options for sending documents to an e-mail or I-fax
address, or file server.
1. TX FILE NAME
Sets the name of the document you send to an e-mail or
I-fax address, or file server. (max. 24 characters, including
spaces.)
2. SUBJECT
Sets the subject for your e-mail/I-fax message.
(max. 40 characters, including spaces.)
3. MESSAGE TEXT
Sets the message body text for your e-mail/I-fax message.
(max. 140 characters, including spaces.)
TX/RX SETTINGS
4. REPLY-TO
Sets the reply-to address for your e-mail/I-fax message.
(max. 120 characters, including spaces.)
5. E-MAIL PRIORITY
Sets the priority for your e-mail message.
– NORMAL
– LOW
– HIGH
7. TX TERMINAL ID
Sets the options for sender information.
1. PRINTING
POSITION
Selects where the sender information is printed in small type
at the top of each page.
– OUTSIDE IMAGE
– INSIDE IMAGE
2. TELEPHONE #
MARK
Prefixes your number/I-fax address with the abbreviations
FAX, IFAX, or TEL in your sender information.
– FAX
– TEL
8. COLOR TX GAMMA
Sets the gamma value for color scanned data. If the set
value corresponds to the gamma value at the recipient’s
machine, the scan exposure of the output data at the
recipient’s machine is automatically adjusted to the level
best suited to the quality of the original.
(GAMMA 1.8, GAMMA 2.2, GAMMA 1.0, GAMMA 1.4)
9. SHARPNESS
Sets the contrast of the images you scan. (1-7)
Machine Settings
14-14
TX/RX SETTINGS
10. COLOR TX SCAN
SET
Sets the priority for color scanned data.
SPEED PRIORITY
Reduces the time spent in sending the document, but
results in low quality images.
IMAGE PRIORITY
Increases the time spent in sending the document, but
results in high quality images.
11. INIT STANDARD
SET
2. RX SETTINGS
Sets whether to restore <STANDARD SETTINGS> in <TX
SETTINGS> to the default.
– OFF
– ON
Sets the reception features.
1. TWO-SIDED PRINT
Sets the type of two-sided printing for faxing. (See
Chapter 1, “Advanced Send Features,” in the Advanced
Operation Guide.)
– OFF
– ON
2. RECEIVE
REDUCTION
Sets whether the received images print out at a reduced
size. (See Chapter 1, “Advanced Send Features,” in the
Advanced Operation Guide.)
ON
1. RX
REDUCTION
Selects the reducing type.
– AUTO
– FIXED REDUCTION (90%, 95%, 97%, 75%)
2. REDUCE
DIRECTION
Selects the reducing direction.
– VERTICAL ONLY
– HORIZ & VERTICAL
Machine Settings
OFF
14-15
Image reduction is turned on.
Image reduction is turned off.
TX/RX SETTINGS
3. CONT. PRINTING
Selects how the machine responds when the <TONER
LOW/PREPARE NEW TONER> message appears.
RX TO MEMORY
The machine stores all documents in memory.
KEEP PRINTING
The machine does not store documents in memory if the
toner runs out. Reset to <RX TO MEMORY> after replacing
the toner cartridge.
2. FAX SETTINGS
1. USER SETTINGS
Sets the fax features.
Specifies the basic operation settings in the fax mode.
1. UNIT TELEPHONE #
Registers your fax number (max. 20 characters, including
spaces). (See “Set the Machine for Sending Faxes,” in the
Quick Start Guide.)
2. TEL LINE TYPE
Selects the telephone line type. (See “Set the Machine for
Sending Faxes,” in the Quick Start Guide.)
– TOUCH TONE
– ROTARY PULSE
3. OFFHOOK ALARM
Sets whether the alarm sounds when the handset of the
external telephone is off the hook.
– ON
– OFF
4. VOLUME CONTROL
Adjusts the monitor volume and the calling volume.
1. MONITOR VOL.
CTRL
Sets the volume for monitor tone during the fax
transmission. (0-3)
2. CALLING
VOLUME
Set the volume of the ring produced when the machine
detects a call. (1-3)
Machine Settings
14-16
TX/RX SETTINGS
2. TX SETTINGS
Sets the transmission features.
1. ECM TX
Sets whether the ECM (Error Correction Mode) transmission
is activated.
– ON
– OFF
2. PAUSE TIME
Sets the pause time when you insert pause into the dialing
sequence. (1SEC–15SEC)
3. AUTO REDIAL
Sets whether to redial automatically when the other line is
busy or a transmission error occurs. (See Chapter 1,
“Advanced Send Features,” in the Advanced Operation
Guide.)
ON
1. REDIAL TIMES
Sets the number of retries. (1TIMES–10TIMES)
2. REDIAL
INTERVAL
Sets period of time before redialing. (2MIN.–99MIN.)
3. TX ERROR
REDIAL
Sets whether the machine redials automatically when
transmission error occurs.
– ON
– OFF
OFF
Machine Settings
4. TIME OUT
14-17
Customizes the redial operation.
After the first attempt at dialing fails, redialing is not
attempted.
Sets whether to scan a document automatically after
specifying the destination.
* This function is not available when you dial with the
numeric keys.
– OFF
– ON
TX/RX SETTINGS
5. DIALING LINE CHCK
3. RX SETTINGS
Sets whether to check the telephone line condition.
– OFF
– ON
Sets the reception features.
1. ECM RX
Sets whether the ECM (Error Correction Mode) reception is
activated.
– ON
– OFF
2. RX MODE
Selects the receive mode. (See “Set the Machine for
Receiving Faxes,” in the Quick Start Guide.)
– FaxOnly
– FaxTel
– AnsMode
– DRPD
– Manual
3. FAX/TEL OPT. SET
Sets the optional items in the <FaxTel> mode. (See
Chapter 1, “Advanced Send Features,” in the Advanced
Operation Guide.)
1. RING START
TIME
Sets the time the machine takes to check whether a call is a
fax or a voice call. (0SEC–30SEC)
2. F/T RING TIME
Selects the ring length for voice calls. (15SEC–300SEC)
3. F/T SWITCH
ACTION
Selects whether the machine switches to the receive mode
after the ring time has elapsed, or whether if disconnects the
call.
– RECEIVE
– DISCONNECT
Machine Settings
14-18
TX/RX SETTINGS
4. DRPD:SELECT FAX
Selects the ring pattern for fax calls.
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
– NORMAL RING
5. INCOMING RING
Sets whether the external telephone rings when the
machine receives a voice call or fax, enabling you to answer
the voice call. This function is only available when the <RX
MODE> is set to <FaxOnly> or <FaxTel>.
OFF
The telephone does not ring when the machine receives a
voice call or fax. (In the Sleep mode, the telephone may ring
one or two times, if <ENERGY IN SLEEP> in <COMMON
SETTINGS> is set to <LOW>.)
ON
The telephone rings when the machine receives a voice call
or fax if an external telephone is connected.
RING COUNT
6. REMOTE RX
ON
OFF
Machine Settings
Sets whether to use remote receiving. (See Chapter 1,
“Advanced Send Features,” in the Advanced Operation
Guide.)
The machine enables remote receiving.
REMOTE RX ID
14-19
Sets the number of incoming rings before the machine
answers. (1TIMES–99TIMES)
You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9, * and # is
possible.
The machine disables remote receiving.
TX/RX SETTINGS
7. MANUAL/AUTO
Sets whether the machine switches to the document receive
mode after the external telephone rings for a specified
length of time in the manual receive mode.
OFF
The external telephone keeps ringing until someone
answers the call manually.
ON
The machine switches to the document receive mode after
the external telephone rings for a specified time.
F/T RING TIME
Sets the length of time to elapse before the machine
switches to document receiving. (1SEC–99SEC)
Machine Settings
14-20
ADDRESS BOOK SET.
Setting Item
1. FAVORITES BUTTONS
FAX
Description
Registers destinations together with a combination of the
scan and send settings for frequent use. (M1–M4: Onetouch keys 01 to 04 are used for this feature.)
Registers fax numbers.
Registers the recipient’s name (max. 16 characters,
including spaces).
2. TEL NUMBER
ENTRY
Registers the recipient’s fax number (max. 120 digits,
including spaces).
3. IMAGEQUALITY
Sets the image quality.
– FINE
– PHOTO
– SUPER FINE
– ULTRA FINE
– STANDARD
4. OPTIONAL
SETTING
Selects whether to use the advanced functional settings for
each one-touch key registered in the machine.
Machine Settings
1. NAME
14-21
OFF
The optional setting is not set for this destination.
ON
The optional setting is set for this destination.
1. ECM
Selects whether to use ECM (Error Correction Mode).
– ON
– OFF
2. TX SPEED
Select the transmission speed.
(33600bps, 14400bps, 9600bps, 4800bps)
3. INTERNATIONAL
Selects a mode for documents you are sending.
– DOMESTIC
– LONG DISTANCE 1
– LONG DISTANCE 2
– LONG DISTANCE 3
(See “Registering Fax Numbers,” on p. 4-28.)
ADDRESS BOOK SET.
E-MAIL
Registers e-mail addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. E-MAIL ADDRESS
Registers the recipient’s e-mail address (max. 120 digits).
3. IMAGE FORMAT
Sets the file format for the file attached to e-mail message.
– PDF
– TIFF (B&W)
– PDF (COMPACT)
– JPEG
4. DIVIDE INTO PAGES
Sets if multiple images are sent as separate files or as a
single file.
OFF
Sends multiple images as a single file without dividing them.
ON
Separates multiple images and send them as separate files.
5. IMAGEQUALITY
Sets the resolution of the document you send.
(200x200dpi, 200x400dpi, 300x300dpi, 400x400dpi,
600X600dpi, 100X100dpi, 150X150dpi, 200x100dpi)
(See Chapter 1, “Advanced Send Features,” in the
Advanced Operation Guide.)
6. ORIGINAL TYPE
Sets the original type for the document you send.
– TEXT/PHOTO
– TEXT
– PHOTO
IFAX
Registers I-fax addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. I-FAX ADDRESS
Registers the recipient’s I-fax address (max. 120 digits).
Machine Settings
14-22
ADDRESS BOOK SET.
3. DIVIDE INTO PAGES
Sets if multiple images are sent as separate files or as a
single file.
OFF
Sends multiple images as a single file without dividing them.
ON
Separates multiple images and send them as separate files.
4. IMAGEQUALITY
Sets the resolution of the document you send.
(200x200dpi, 200x400dpi, 300x300dpi, 400x400dpi,
600X600dpi, 100X100dpi, 150X150dpi, 200x100dpi)
(See Chapter 1, “Advanced Send Features,” in the
Advanced Operation Guide.)
5. ORIGINAL TYPE
Sets the original type for the document you send.
– TEXT/PHOTO
– TEXT
– PHOTO
FTP
Registers FTP addresses.
Registers the recipient’s name (max. 16 characters,
including spaces).
2. HOST NAME
Registers the name of the file server (max. 120 characters).
3. FILE PATH
Registers the path to the file server (max. 120 characters).
4. LOGIN NAME
Registers the login name to access the file server (max. 24
characters).
5. PASSWORD
Registers the password to access the file server (max. 24
characters).
6. IMAGE FORMAT
Sets the file format.
– PDF
– TIFF (B&W)
– PDF (COMPACT)
– JPEG
Machine Settings
1. NAME
14-23
ADDRESS BOOK SET.
7. DIVIDE INTO PAGES
Sets if multiple images are sent as separate files or as a
single file.
OFF
Sends multiple images as a single file without dividing them.
ON
Separates multiple images and send them as separate files.
8. IMAGEQUALITY
Sets the resolution of the document you send.
(200x200dpi, 200x400dpi, 300x300dpi, 400x400dpi,
600X600dpi, 100X100dpi, 150X150dpi, 200x100dpi)
(See Chapter 1, “Advanced Send Features,” in the
Advanced Operation Guide.)
9. ORIGINAL TYPE
Sets the original type for the document you send.
– TEXT/PHOTO
– TEXT
– PHOTO
SMB
Registers SMB addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. HOST NAME
Registers the name of the file server (max. 120 characters).
3. FILE PATH
Registers the path to the file server (max. 120 characters).
4. LOGIN NAME
Registers the login name to access the file server (max. 24
characters).
5. PASSWORD
Registers the password to access the file server (max. 14
characters).
Machine Settings
14-24
ADDRESS BOOK SET.
6. IMAGE FORMAT
Sets the file format.
– PDF
– TIFF (B&W)
– PDF (COMPACT)
– JPEG
7. DIVIDE INTO PAGES
Sets if multiple images are sent as separate files or as a
single file.
OFF
Sends multiple images as a single file without dividing them.
ON
Separates multiple images and send them as separate files.
8. IMAGEQUALITY
Sets the resolution of the document you send.
(200x200dpi, 200x400dpi, 300x300dpi, 400x400dpi,
600X600dpi, 100X100dpi, 150X150dpi, 200x100dpi)
(See Chapter 1, “Advanced Send Features,” in the
Advanced Operation Guide.)
9. ORIGINAL TYPE
Sets the original type for the document you send.
– TEXT/PHOTO
– TEXT
– PHOTO
2. 1-TOUCH SPD DIAL
FAX
Registers the destinations on one-touch keys. Up to 23
destinations can be registered. (See “Storing/Editing OneTouch Keys/Coded Dial Codes,” on p. 4-27.)
Registers fax numbers.
Registers the recipient’s name (max. 16 characters,
including spaces).
2. TEL NUMBER
ENTRY
Registers the recipient’s fax number (max. 120 digits,
including spaces).
Machine Settings
1. NAME
14-25
ADDRESS BOOK SET.
3. OPTIONAL
SETTING
Sets the optional settings for sending faxes.
OFF
The optional setting is not set.
ON
The optional setting is set.
1. ECM
Selects whether to use ECM (Error Correction Mode).
– ON
– OFF
2. TX SPEED
Selects the transmission speed.
(33600bps, 14400bps, 9600bps, 4800bps)
3. INTERNATIONAL
Selects a mode for documents you are sending.
– DOMESTIC
– LONG DISTANCE 1
– LONG DISTANCE 2
– LONG DISTANCE 3
(See “Registering Fax Numbers,” on p. 4-28.)
E-MAIL
Registers e-mail addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. E-MAIL ADDRESS
Registers the recipient’s e-mail address (max. 120 digits).
IFAX
Registers I-fax addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. I-FAX ADDRESS
Registers the recipient’s I-fax address (max. 120 digits).
Machine Settings
14-26
ADDRESS BOOK SET.
FTP
Registers FTP addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. HOST NAME
Registers the name of the file server (max. 120 characters).
3. FILE PATH
Registers the path to the file server (max. 120 characters).
4. LOGIN NAME
Registers the login name to access the file server (max. 24
characters).
5. PASSWORD
Registers the password to access the file server (max. 24
characters).
SMB
Registers SMB addresses.
Registers the recipient’s name (max. 16 characters,
including spaces).
2. HOST NAME
Registers the name of the file server (max. 120 characters).
3. FILE PATH
Registers the path to the file server (max. 120 characters).
4. LOGIN NAME
Registers the login name to access the file server (max. 24
characters).
5. PASSWORD
Registers the password to access the file server (max. 14
characters).
Machine Settings
1. NAME
14-27
ADDRESS BOOK SET.
3. CODED SPD DIAL
FAX
Registers the destinations for coded dial codes. Up to 177
destinations can be registered. (See “Storing/Editing OneTouch Keys/Coded Dial Codes,” on p. 4-27.)
Registers fax numbers.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. TEL NUMBER
ENTRY
Registers the recipient’s fax number (max. 120 digits,
including spaces).
3. OPTIONAL
SETTING
Sets the optional settings for sending faxes.
OFF
The optional setting is not set.
ON
The optional setting is set.
1. ECM
Selects whether to use ECM (Error Correction Mode).
– ON
– OFF
2. TX SPEED
Selects the transmission speed.
(33600bps, 14400bps, 9600bps, 4800bps)
3. INTERNATIONAL
Selects a mode for documents you are sending.
– DOMESTIC
– LONG DISTANCE 1
– LONG DISTANCE 2
– LONG DISTANCE 3
(See “Registering Fax Numbers,” on p. 4-28.)
Machine Settings
14-28
ADDRESS BOOK SET.
E-MAIL
Registers e-mail addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. E-MAIL ADDRESS
Registers the recipient’s e-mail address (max. 120 digits).
IFAX
Registers I-fax addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. I-FAX ADDRESS
Registers the recipient’s I-fax address (max. 120 digits).
FTP
Registers FTP addresses.
1. NAME
Registers the recipient’s name (max. 16 characters,
including spaces).
2. HOST NAME
Registers the name of the file server (max. 120 characters).
3. FILE PATH
Registers the path to the file server (max. 120 characters).
4. LOGIN NAME
Registers the login name to access the file server (max. 24
characters).
5. PASSWORD
Registers the password to access the file server (max. 24
characters).
SMB
Registers SMB addresses.
Registers the recipient’s name (max. 16 characters,
including spaces).
2. HOST NAME
Registers the name of the file server (max. 120 characters).
Machine Settings
1. NAME
14-29
ADDRESS BOOK SET.
3. FILE PATH
Registers the path to the file server (max. 120 characters).
4. LOGIN NAME
Registers the login name to access the file server
(max. 24 characters).
5. PASSWORD
Registers the password to access the file server
(max. 14 characters).
4. GROUP DIAL
Registers destinations in group addresses. Up to 199
destinations can be registered in a group. (See “Storing/
Editing One-Touch Keys/Coded Dial Codes,” on p. 4-27.)
1. SELECT ADD/TEL NO
Registers the recipient’s numbers and addresses by
specifying the one-touch keys or coded dial codes.
2. NAME
Registers the group name (max. 16 characters, including
spaces).
PRINTER SETTINGS
Setting Item
Description
1. DEFAULT PAPERSIZE
Sets the default paper size when no paper source is
specified.
(LTR, STMT, EXECUTIV, ISO-B5, ISO-C5, COM10,
MONARCH, DL, A4, B5, A5, LGL)
2. DEFAULT PAPERTYPE
Sets the default paper type for print jobs. This machine has
internally defined optimal print modes for each specified
paper type.
(PLAIN PAPER, COLOR, RECYCLED, HEAVY PAPER 1,
HEAVY PAPER 2, HEAVY PAPER 3, BOND, 3HOLE
PUNCH PAPER, TRANSPARENCY, LABELS, ENVELOPE)
Machine Settings
14-30
PRINTER SETTINGS
3. COPIES
Sets the number of documents printed. (1-999)
4. 2-SIDED PRINTING
Sets whether to activate two-sided printing.
– OFF
– ON
5. PRINT QUALITY
Sets the image quality, density or toner saving mode for
printing.
1. IMAGE REFINEMENT
Sets whether to print smoothly the jagged outlines of
characters and graphics.
– ON
– OFF
2. DENSITY
Adjusts the print density. (1-9)
3. TONER SAVER
Sets whether the toner saving mode is enabled.
– OFF
– ON
6. PAGE LAYOUT
Sets the printing layout.
1. BINDING
Sets the binding position for two-sided printing.
– LONG EDGE
– SHORT EDGE
2. MARGIN
Sets the page margin in inches or millimeters.
– INCHES (-01.90INCHES–01.90INCHES)
– MM (-50.0MM–50.0MM)
Machine Settings
7. COLLATE
14-31
Sets whether to collate the printouts automatically.
– OFF
– COLLATE
PRINTER SETTINGS
8. ERROR TIME OUT
Sets the length of time before the machine returns an error
when no data is received from the computer.
ON
Sets the error time out period. (5SEC–300SEC)
OFF
The error time out is off.
9. INIT. PRINTER SET
Restores all <PRINTER SETTINGS> to the default.
– OFF
– ON
10.PCL SETTINGS**
Sets the PCL printer setting.
**
1. ORIENTATION
Sets the paper orientation.
– PORTRAIT
– LANDSCAPE
2. FONT NUMBER
Sets the default font typeface for the printer function using
the corresponding font numbers. (0-120)
3. POINT SIZE
Specifies a point size for the default font. This item appears
when the number in <FONT NUMBER> is that of a
proportionally spaced scalable font. (4.00–999.75)
4. PITCH
Specifies the pitch for the default font. This item appears
when the number in <FONT NUMBER> is that of a fixed
pitch scalable font. (0.44–99.99)
5. FORM LINES
Sets the number of lines to be printed on a page. (5-128)
6. SYMBOL SET
Selects the symbol set most suited to the needs of the host
computer.
7. CUSTOM PAPER
Sets whether to use a custom paper size.
OFF
Disables you to specify a custom paper size.
ON
Enables you to specify a custom paper size.
Only for users of the PCL Printer Kit
Machine Settings
14-32
PRINTER SETTINGS
1. UNIT OF
MEASURE
Selects the unit of measurement to specify a custom paper
size.
– INCHES
– MILLIMETERS
2. X DIMENSION
Specifies the horizontal size of the custom paper.
(05.00–14.00" (127–356 mm))
3. Y DIMENSION
Specifies the vertical size of the custom paper.
(03.00–08.50" (76–216 mm))
8. APPEND CR TO LF
Sets whether to append a carriage return (CR) when line
feed code (LF) is received.
NO
The print head moves down to the next line when line feed
code is received, and the margin does not change (such as
the beginning of the next line).
YES
The print head moves to the beginning of the next line when
line feed code is received.
9. ENLARGE A4
Sets whether to expand the printable area of A4 size paper
to that of Letter size in width.
* This setting is applicable for A4 paper and portrait orientation for
the PCL5 printing only. The PCL6 printing is not supported.
OFF
All the area on a page 1/8" (4.23 mm) from the top, bottom,
left, and right edges is available for printing on A4 paper.
ON
All the area on a page 1/8" (4.23 mm) from the top and
bottom edges and 1/8" (3.30 mm) from the left and right
edges is available for printing on A4 paper. Only the width
increases.
Machine Settings
10.BarDIMM***
Sets whether to use the bar code printing function.
ENABLE
Sets the bar code printing function to on.
FreeScape: ~, ", #, $, /, \, ?, {, }, |, OFF
DISABLE
Sets the bar code printing function to off.
11.RESET PRINTER
Clears all print jobs in progress and resets the printer
function.
– OFF
– ON
*** This setting is available only if the bar code printing function is activated.
14-33
TIMER SETTINGS
Setting Item
Description
1. DATE&TIME SETTING
Sets the current date and time. (See “Set Up the Machine,”
in the Quick Start Guide.)
2. TIME ZONE SETTING
Sets the time zone of your machine’s location. (See “Setting
Time Zone,” on p. 1-17.)
3. DATE TYPE SELECT
Sets the date format.
– MM/DD/YYYY
– DD/MM YYYY
– YYYY MM/DD
4. AUTO SLEEP TIME
Sets the auto sleep mode when the machine remains idle
for a certain period of time. (3MIN.–30MIN.) (See “Setting
the Sleep Mode,” on p. 1-13.)
– ON
– OFF
5. AUTO CLEAR TIME
Sets the auto clear mode when the machine has no
operation idle for a certain period of time. (1MIN.–9MIN.)
The machine returns to the standby mode. (See “Setting
Auto Clear Time,” on p. 1-15.)
– ON
– OFF
6. DAYLIGHT SV.TIME
Sets the daylight saving time mode. (See “Setting Daylight
Saving Time,” on p. 1-18.)
OFF
Deactivates the daylight saving time mode.
ON
Activates the daylight saving time mode.
Sets the start date.
– 1. MONTH
– 2. WEEK
– 3. DAY
2. END DATE/TIME
Sets the end date.
– 1. MONTH
– 2. WEEK
– 3. DAY
Machine Settings
1. START DATE/TIME
14-34
ADJUST./CLEANING
Setting Item
Description
1. TRANS. ROLR CLEAN
Cleans the transcription roller. (See “Transcription Roller,” on
p. 12-7.)
2. DRUM CLEANING
Cleans the drum. (See “Drum Unit,” on p. 12-8.)
3. FIX.UNIT CLEANING
Cleans the fuser roller. (See “Fuser Roller,” on p. 12-2.)
4. FEEDER CLEANING
Cleans the ADF. (See “Cleaning the ADF Automatically,” on
p. 12-6.)
5. SPECIAL MODE M
Sets to improve print quality or fix irregular print density. If
print quality decreases or an irregularity in the print density
appears, transcription output may not function adequately.
MID
Selects in normal conditions.
LOW
Selects to compensate for poor print quality that occurs
when using paper that was stored for a long time at high
temperatures and high humidity.
HIGH
Selects to compensate for poor quality that occurs when
using heavyweight paper.
When the two-sided printing function is used, paper may curl
severely or become jammed. Enable this setting to prevent
paper curling or jamming.
– OFF
– ON
7. SPECIAL MODE P
Sets to activate when lightweight paper or paper which is
easy to get uneven print density is used for printing.
– OFF
– ON
Machine Settings
6. SPECIAL MODE N
14-35
ADJUST./CLEANING
8. SPECIAL MODE S
Sets whether to reduce the waiting time for the next printout.
When you change the paper size after continuous printing,
the machine may take a while to start the next printing.
OFF
Does not reduce the waiting time next set of printout.
(default)
SPEED PRIORITY
Reduces the waiting time to start the next set of printout.
Print speed has priority; however, a condition that an
previously printed image also appears faintly on the next
output may occur.
9. CONT. PRINT MODE
Sets whether to prevent the back edge of the previous page
from appearing on the following page during continuous
printing of half-tone prints or photographs.
– OFF
– ON
Machine Settings
14-36
ADJUST./CLEANING
Sets whether to prevent back edge of paper from smudging.
– OFF
– ON
11.LARGE PAPER MODE
Sets whether to improve toner fix on large-sized paper.
– OFF
– ON
12.AUTO ADF DRTY ADJ
Sets whether to activate smudge (due to dust or dirt)
reduction during printing.
When the ADF is dirty, copies may contain unwanted dots or
lines.
– ON
– OFF
13.MAINTENANCE CODE
This setting is not functional in this model.
Machine Settings
10.BACK EDGE MODE
14-37
REPORT SETTINGS
Setting Item
1. SETTINGS
1. TX REPORT
PRINT ERROR ONLY
REPORT WITH TX
IMAGE
OUTPUT YES
REPORT WITH TX
IMAGE
OUTPUT NO
Description
Sets the report functions. (See Chapter 7, “Reports and
Lists,” in the Advanced Operation Guide.)
Sets whether the transmission report prints out.
Prints a report only when a transmission error occurs.
Sets whether to print the first page of the document under
the report.
– OFF
– ON
Prints a report every time you send a document.
Sets whether to print the first page of the document under
the report.
– OFF
– ON
No report is printed.
2. RX REPORT
Sets whether the reception report prints out.
– OUTPUT NO
– PRINT ERROR ONLY
– OUTPUT YES
3. ACTIVITY REPORT
Sets whether to automatically print the transaction report
and selects its type.
Sets whether an activity report is printed automatically every
40 transactions.
– OUTPUT YES
– OUTPUT NO
2. TX/RX SEPARATE
Sets whether an activity report is printed separately for
sending and receiving or not.
– OFF
– ON
14-38
Machine Settings
1. AUTO PRINT
REPORT SETTINGS
2. LIST PRINT
Prints reports/lists.
Prints the transaction report (max. last 40 transactions)
manually.
2. SPEED DIAL LIST
Prints the list of destinations registered in Address Book.
– 1. 1-TOUCH LIST
– 2. CODED DIAL LIST
– 3. GROUP DIAL LIST
3. ADD BOOK DETAILS
Prints the details of Address Book.
– 1. 1-TOUCH (DETAILS)
– 2. CODED (DETAILS)
4. USER DATA LIST
Prints the setting list registered in the menu. (See “Printing
USER’S DATA LIST,” on p. 14-1.)
Machine Settings
1. ACTIVITY REPORT
14-39
SYSTEM SETTINGS
Setting Item
1. SYS. MANAGER INFO
Description
Sets the system manager information to protect the contents
of <SYSTEM SETTINGS>. Once the system manager ID
and system password is set, they must be entered every
time you access the <SYSTEM SETTINGS> menu.
1. SYS. MANAGER ID
Sets the system manager ID (seven digits).
2. SYSTEM PASSWORD
Sets the system manager password (seven digits).
3. SYSTEM MANAGER
Sets the system manager name (max. 32 characters,
including spaces).
2. DEVICE INFO
Sets device information.
1. DEVICE NAME
Registers the machine name (max. 32 characters, including
spaces).
2. LOCATION
Registers the machine location (max. 32 characters,
including spaces).
3. MANAGE DEPT. ID
Sets if the department ID management is used.
OFF
The department ID management is not used.
ON
The department ID management is used.
1. REGISTER DEPT. ID
Registers the department ID (0001-1000).
1. PASSWORD
Registers the department ID management password.
2. PAGE LIMIT SET.
Sets page limits for scans, prints, and copies from 0 to
999,999 pages.
1. TOTAL PRINT
Sets the total page limit.
Sets if the total page limit is used.
– OFF
– ON
2. PAGE TOTALS
Sets page limits for from 0 to 999,999 pages.
Machine Settings
1. RESTRICT
TOTAL
14-40
SYSTEM SETTINGS
2. COPY
1. RESTRICT
COPY
Sets if the copy limit is used.
– OFF
– ON
2. COPY LIMIT
Sets page limits for from 0 to 999,999 pages.
3. SCAN
Sets if the scan limit is used.
– OFF
– ON
2. SCAN LIMIT
Sets page limits for from 0 to 999,999 pages.
Sets the limit for color scans.
1. RESTRICT CLR
SCAN
Sets if the color scan limit is used.
– OFF
– ON
2. COLOR SCAN
LIMIT
Sets page limits for from 0 to 999,999 pages.
5. PRINT
Sets the limit for prints.
1. RESTRICT
PRINT
Sets if the print limit is used.
– OFF
– ON
2. PRINT LIMIT
Sets page limits for from 0 to 999,999 pages.
3. ERASE
Machine Settings
Sets the limit for scans.
1. RESTRICT
B&W SCAN
4. COLOR SCAN
14-41
Sets the limit for copies.
Erases the department ID and password.
– OFF
– ON
SYSTEM SETTINGS
2. PAGE TOTALS
Displays, clears, and prints counter information.
1. VIEW PAGE TOTALS
Displays how much paper was used by each department.
– 1. TOTAL PRINT
– 2. COPY
– 3. SCAN
– 4. RESTRICT CLR SCAN
– 5. PRINT
2. CLEAR ALL TOTAL
Clears counter information.
– OFF
– ON
3. PRINT LIST
Prints counter information.
– OFF
– ON
3. PDL JOBS W/OUT ID
Sets if print jobs from computers with unknown IDs are
accepted or rejected.
ON
Accepts print jobs from computers with unknown IDs.
OFF
Rejects print jobs from computers with unknown IDs.
4. MANAGE USER ID
Sets if the user ID management is used.
– OFF
– ON
5. NETWORK SETTINGS
Sets the network setting. (See Chapter 3, “Network,” in the
Advanced Operation Guide.)
1. TCP/IP SETTINGS
1. IP ADDRESS AUTO.
Sets TCP/IP network.
Sets whether to automatically set an IP address.
Enables an IP address to the machine automatically.
– 1. DHCP (ON/OFF)
– 2. BOOTP (OFF/ON)
– 3. RARP (OFF/ON)
OFF
Allocate an IP address to the machine manually.
Machine Settings
ON
14-42
SYSTEM SETTINGS
2. IP ADDRESS
Registers a fixed IP address to the machine. (See “Set the
Machine for Network Usage,” in the Quick Start Guide.)
3. SUBNET MASK
Registers a fixed subnet mask to the machine.
4. GATEWAY
ADDRESS
Registers a fixed gateway address to the machine.
5. DNS SETTINGS
Sets the DNS server settings.
1. PRIMARY
SERVER
Registers the primary server address.
2. SECONDARY
SERVER
Registers the secondary server address.
3. HOST NAME
Registers the host name of the DNS server.
4. DOMAIN NAME
Registers the domain name of the DNS server.
5. DNS DYNA.
UPDATE
This setting is not functional in this model.
6. CONFIGURE WINS
1. WINS
RESOLUTION
Sets whether to resolve a name with WINS.
– OFF
– ON
2. WINS SERVER
Registers the IP address of a WINS server.
Machine Settings
7. USE LPD
14-43
Sets the WINS settings to resolve a name with WINS.
Sets whether to use LPD as the print application.
– ON
– OFF
SYSTEM SETTINGS
8. RAW SETTINGS
Sets whether to use RAW as the print application.
ON
Enables to use RAW.
1. USE
BIDIRECTIONAL
Sets whether to use bi-directional communication.
– ON
– OFF
OFF
Disables to use RAW.
9. USE PASV MODE
Sets the PASV mode for FTP.
– OFF
– ON
10.FTP EXTENSION
Sets the FTP Extension settings.
– OFF
– ON
11.USE HTTP
Sets whether to activate HTTP (HyperText Transfer Protocol)
for the Remote UI.
– ON
– OFF
12.PROXY SETTINGS
Sets whether to use Proxy server.
1. USE PROXY
13.PORT NO.
Enables to use Proxy server.
– OFF
– ON
Sets the port number settings.
0∼65535 (default:515)
2. RAW
0∼65535 (default:9100)
3. HTTP
0∼65535 (default:80)
4. SMTP RX
0∼65535 (default:25)
5. POP3 RX
0∼65535 (default:110)
6. FTP SENDING
0∼65535 (default:21)
7. SMTP TX
0∼65535 (default:25)
8. SNMP
0∼65535 (default:161)
Machine Settings
1. LPD
14-44
SYSTEM SETTINGS
14.SET IP ADD RANGE
OFF
Disables restriction of IP address of computers.
ON
Enables restriction of IP address of computers from which
data (print/fax jobs) can be sent to the machine.
1. PERMIT/
REJECT
Selects whether to permit or reject access from a specified
IP address.
– REJECT
– PERMIT
2. SET IP
ADDRESS
Specifies the IP address range. <START IP ADDRESS> and
<END IP ADDRESS> must be entered for each setting.
– 1. IP ADDRESS 1
– 2. IP ADDRESS 2
– 3. IP ADDRESS 3
– 4. IP ADDRESS 4
Machine Settings
15.RX MAC ADD SET.
14-45
Sets whether to restrict the range of IP addresses.
Sets whether to activate a MAC address filter.
OFF
Disables MAC address filter.
ON
Specifies a MAC address filter to access. MAC address
must be entered for each setting.
– 1. PERMIT RX ADD1
– 2. PERMIT RX ADD2
– 3. PERMIT RX ADD3
– 4. PERMIT RX ADD4
– 5. PERMIT RX ADD5
SYSTEM SETTINGS
2. SMB SETTINGS
1. USE SMB CLIENT
Sets the SMB settings to use the machine on a NetBIOS
network.
Sets if SMB client is used.
OFF
SMB client is not used.
ON
SMB client is used.
1. SERVER
Enters the NetBIOS name of the machine.
2. WORKGROUP
Enters the name of the workgroup the machine belongs to.
3. COMMENT
Enters a comment about the printer.
4. LM
ANNOUNCE
Sets if the machine notifies the LAN Manager of its
existence.
– OFF
– ON
3. SNMP SETTINGS
Sets detailed information about SNMP.
Sets whether to activate SNMP.
– ON
– OFF
2. COMMUNITY
NAME 1
Sets SNMP community name 1 (default: public).
3. COMMUNITY
NAME 2
Sets SNMP community name 2.
4. SNMP WRITABLE 1
Enables computers on the network to access the machine
and modify its settings.
– ON
– OFF
5. SNMP WRITABLE 2
Enables computers on the network to access the machine
and modify its settings.
– OFF
– ON
14-46
Machine Settings
1. USE SNMP
SYSTEM SETTINGS
4. DEDICATED PORT
Sets or browses detailed information on the machine with a
Canon printer driver or utility.
– ON
– OFF
5. ETHERNET DRIVER
Specifies the type of network connection.
1. AUTO DETECT
Selects the detection method of Ethernet driver.
AUTO
Sets the machine to determine the communication mode
(Half duplex/Full duplex) and Ethernet type (10Base-T/
100Base-TX) automatically.
MANUAL
Sets the communication mode and Ethernet type manually.
1. DUPLEX
Selects the communication mode.
– HALF DUPLEX
– FULL DUPLEX
2. ETHERNET
TYPE
Selects the Ethernet type.
– 10 BASE-T
– 100 BASE-TX
6. VIEW IP ADDRESS
Checks the current network settings.
Checks the IP address.
2. SUBNET MASK
Checks the subnet mask.
3. GATEWAY
ADDRESS
Checks the gateway address.
Machine Settings
1. IP ADDRESS
14-47
SYSTEM SETTINGS
7. E-MAIL/I-FAX
1. SMTP RX
Sets whether to receive e-mail/l-faxes using the machine’s
own SMTP receiving function.
– OFF
– ON
2. SMTP SERVER
Registers the host name of the machine with the DNS
server.
3. POP
Sets whether to receive e-mail/l-faxes using a POP server.
– OFF
– ON
4. E-MAIL ADDRESS
Enters the e-mail address your machine will use
(max. 64 characters).
5. POP SERVER
Enters the POP server IP address or name
(max. 48 characters).
6. POP ADDRESS
Enters the login name for access to the POP server
(max. 32 characters).
7. POP PASSWORD
Enters the password for access to the POP server
(max. 32 characters).
8. POP INTERVAL
Sets the interval you want the POP server to check for
incoming e-mail. If the interval is set to 0, the POP server is
not checked automatically (0MIN.–99MIN.).
9. AUTH/ENC
SETTINGS
Specifies authenticating method before sending e-mail.
Sets whether to use the SMTP server requires POP before
SMTP (method for authenticating users who have logged in
the POP server before sending e-mail).
– OFF
– ON
2. SMTP AUTH
Sets whether to use the SMTP server requires SMTP
Authentication (method for authenticating users who have
logged in the POP server before sending e-mail).
– OFF
– ON
8. STARTUP TIME SET.
Sets the time period required to delay the startup of network
communications for the machine (0–300SEC).
14-48
Machine Settings
1. POP BEFORE
SEND.
SYSTEM SETTINGS
6. COMMUNICATIONS
1. E-MAIL/I-FAX
Sets the fax, e-mail, and I-fax communication.
Sets the e-mail/I-fax communications.
1. MAX TX DATA SIZE
Sets the maximum data size for outgoing e-mail messages
and I-fax documents. If the e-mail message exceeds this
data size limit, it is split up into several e-mail messages
before being sent. However, if an I-fax transmission exceeds
the data size limit, it is handled as an error, and it is not sent.
(0 to 99 MB)
2. DIVIDED OVER MAX
Sets whether to divide a document into separate files when
it is sent if its size exceeds the data size you specify.
– OFF
– ON
2. FAX SETTINGS
Sets the facsimile communication.
1. TX START SPEED
Sets the transmission start speed for faxes.
(33600bps, 2400bps, 4800bps, 7200bps, 9600bps,
14400bps)
2. RX START SPEED
Sets the reception start speed for faxes. (33600bps,
2400bps, 4800bps, 7200bps, 9600bps, 14400bps)
3. MEMORY LOCK
Sets whether to receive and store all documents in memory
and not to print automatically. (See Chapter 1, “Advanced
Send Features,” in the Advanced Operation Guide.)
Disables memory reception.
ON
Enables memory reception.
Machine Settings
OFF
14-49
1. PASSWORD
Registers the password that protects the authority for
accessing to memory.
2. REPORT PRINT
Sets whether to print a report on memory reception.
– OFF
– ON
SYSTEM SETTINGS
3. MEMORY RX
TIME
Sets whether to set a period for memory reception.
OFF
Disables setting a period of memory reception.
ON
Enables setting a period of memory reception.
– 1. MEM RX START TIME
– 2. MEM. RX END TIME
7. FORWARD ERR. SET.
Sets the machine to print and/or store received documents
when document forwarding fails.
1. PRINT
Sets whether to print out the image if forwarding fails.
– ON
– OFF
2. STORE TO MEMORY
Sets whether to store the image in memory if forwarding
fails.
– OFF
– ON
8. REMOTE UI
Sets whether to activate the Remote UI function to operate
the machine and change the settings from a network
computer using a web browser.
– ON
– OFF
9. ACCESS TO DEST.
Sets restriction of the access to destinations.
Sets a password to restrict editing the Address Book. (7
digits maximum)
2. RESTRICT NEW ADD.
Sets whether to restrict registering or changing destinations
for one-touch keys and coded dial codes*1. Sets whether to
restrict making calls to the destinations not registered in
Address Book.
– OFF
– ON*2
*1 Registration of group addresses is not restricted.
*2 You can still make calls using an external phone if all of the
following conditions are met:
• The machine is in the Sleep mode
• <RX MODE> is set to <FaxOnly>
• <ENERGY IN SLEEP> is set to <LOW>
14-50
Machine Settings
1. ADD. BOOK
PASSWOR
SYSTEM SETTINGS
3. FAX DRIVER TX
Sets whether to restrict sending faxes from a computer
using the fax driver.
– ON
– OFF
4. CONFIRM FAX NO.
Sets whether to confirm the entered fax numbers each time
you send a fax.
– OFF
– ON
10.CHECKING THE LOG
Sets whether to allow displaying the log.
ON
Enables confirmation of logs using [System Monitor].
OFF
Disables confirmation of logs using [System Monitor].
Activity Report will not be printed automatically.
Enter a license key using the numeric keys to activate the
bar code printing function.
12.USE DEVICE USB
Sets whether to restrict jobs through the USB interface.
– ON
– OFF
Machine Settings
11. LICENSE REGISTRA.
14-51
Machine Settings
14-52
Appendix
Specifications
General
Personal Desktop
● Power Source
120 V-127 V, 60 Hz (Power requirements differ
depending on the country in which you purchased the
product.)
● Power Consumption
Approx. 848 W (max.)
● Warm-up Time
• imageRUNNER 1023N/1023iF
Less than 16 sec.*
• imageRUNNER 1019J/1023
Less than 13.5 sec.*
(temperature: 68°F (20°C), humidity: 65%; from when
the machine turns on the power main switch until the
standby display appears)
* Warm-up time may differ depending on the condition
and environment of the machine.
● Weight
• imageRUNNER 1023N/1023iF
Approx. 53.1 lb (24.1 kg) (including drum unit/
excluding toner cartridge)
• imageRUNNER 1019J/1023
Approx. 48.5 lb (22.0 kg) (including drum unit/
excluding toner cartridge)
Appendix
● Type
15-1
General
● Dimensions
• imageRUNNER 1023N/1023iF
17 7/8" (H) x 18" (D) x 20 1/2" (W) (453 mm (H) x 457
mm (D) x 520 mm (W))
22 7/8" (H) x 18" (D) x 20 1/2" (W) (581 mm (H) x 457
mm (D) x 520 mm (W)) (with optional paper drawer)
• imageRUNNER 1019J/1023
14 7/8" (H) x 18" (D) x 20 1/2" (W) (378 mm (H) x 457
mm (D) x 520 mm (W))
19 7/8" (H) x 18" (D) x 20 1/2" (W) (506 mm (H) x 457
mm (D) x 520 mm (W)) (with optional paper drawer)
● Installation Space
38 3/4" (D) x 44" (W) (984 mm (D) x 1,117 mm (W))
(including optional card reader)
● Environmental
Conditions
Temperature: 59°F–86°F (15°C–30°C)
Humidity: 10%–80% RH
● Display Languages
English/French/Spanish/Portuguese
● Acceptable
Documents
» p. 2-1.
● Acceptable Paper
Stock
» p. 3-1.
● Printable Area
» p. 3-3.
● Scanning Area
» p. 2-3.
Appendix
15-2
Copier
● Scanning Resolution
600 dpi x 600 dpi
● Printing Resolution
1200 dpi enhanced x 600 dpi
● Magnification
1:1 ± 1.0%, 1:2.000, 1:1.290, 1:0.780, 1:0.640, 1:0.500
Zoom 0.500 - 2.000, 1% increments
● First Copy Time
Platen glass: less than 8 sec. (LTR)
ADF: less than 12 sec. (LTR)
● Copy Speed
• imageRUNNER 1023/1023N/1023iF
Direct: LTR 23 cpm
• imageRUNNER 1019J
Direct: LTR 19 cpm
● No. of Copies
Max. 99 copies
Appendix
Printer
● Printing Method
Indirect electrostatic method (On-demand fixing)
● Paper Handling
– Paper drawer: 500 sheets x 1 drawer
(21 lb (80 g/m2))
– Stack bypass: 100 sheets (21 lb (80 g/m2))
● Paper Delivery
100 sheets (17 to 21 lb (64 to 80 g/m2))
● Print Speed
See “Copy Speed,” on p. 15-3.
● Printing Resolution
1200 dpi enhanced x 600 dpi
● Number of Tones
256
● Printing Cartridge
» p. 1-8.
Facsimile
● Applicable Line
Public Switched Telephone Network (PSTN)*1
● Compatibility
G3
● Data Compression
Schemes
MH, MR, MMR, JBIG
15-3
Facsimile
● Modem Speed
33.6 Kbps
Automatic fallback
● Transmission Speed
Approx. 3 seconds/page*2 at 33.6 Kbps, ECM-JBIG,
transmitting from the memory
● Fax Resolution
FINE: 203 pels/in. x 196 lines/in.
(8 pels/mm x 7.7 lines/mm)
PHOTO: 203 pels/in. x 196 lines/in.
(8 pels/mm x 7.7 lines/mm)
SUPER FINE: 203 pels/in. x 392 lines/in.
(8 pels/mm x 15.4 lines/mm)
ULTRA FINE: 406 pels/in. x 392 lines/in.
(16 pels/mm x 15.4 lines/mm)
STANDARD: 203 pels/in. x 98 lines/in.
(8 pels/mm x 3.85 lines/mm)
● Dialing
– Speed dialing
One-touch speed dialing (23 destinations)
Coded speed dialing (177 destinations)
Group dialing (Max. 199 destinations in a group)
Address Book dialing (with Address Book key)
– Regular dialing (with numeric keys)
– Automatic redialing
– Manual redialing (with Recall key)
– Sequential broadcast (201 destinations)
– Automatic reception
– Remote reception by telephone (Default ID: 25)
– ACTIVITY REPORT (after every 40 transactions)
– TX (Transmission)/RX (Reception) REPORT
– TTI (Transmit Terminal Identification)
Appendix
15-4
Telephone
● Connection
External telephone/answering machine/data modem
Appendix
*1 The Public Switched Telephone Network (PSTN) currently supports 28.8 Kbps
modem speed or lower, depending on telephone line conditions.
2
* Based on ITU-T Standard Chart No. 1, JBIG standard mode.
15-5
Send Feature
Scan Features
● Communication
Protocol
FTP (TCP/IP), SMB (TCP/IP)
● Data Format
TIFF (B&W), PDF (B&W), JPEG (Color), PDF
(Compact) (Color)
● Resolution
100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi,
200 x 200 dpi, 200 x 400 dpi, 300 x 300 dpi,
400 x 400 dpi, 600 x 600 dpi
● System Environment
Windows 98/Me/XP, Windows 2000 Server/
Professional (SP1 or later), Windows Server 2003,
Solaris Version 2.6 or later, Mac OS X, Red Hat
Linux 7.2
● Interface
USB 2.0, 100BASE-TX, 10BASE-T
● Color Mode
Color, B&W (black and white)
● Original Type
Text, Text/Photo, Photo
E-mail and I-Fax Features*1
SMTP, POP3, I-Fax (Simple mode)
● Resolution
For Sending E-mail: 100 x 100 dpi, 150 x 150 dpi,
200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi,
300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi
For Sending I-Fax: 200 x 100 dpi, 200 x 200 dpi
● Format
E-mail: TIFF (B&W), PDF (B&W), JPEG (Color),
PDF (Compact) (Color)
I-Fax: TIFF (MH)
● Original Size
E-mail: LTR, LGL, STMTR, STMT, A4, A5, A5R, B5
I-Fax: LTR, LGL*2, STMTR*2, STMT*2, A4*2, A5*2,
A5R*2, B5*2
● Server Software
Microsoft Exchange Server 5.5 (SP2), Sendmail
8.11.2, Lotus Domino R4.5/R5
*1 Only the B&W mode is available for sending and receiving I-fax documents.
*2 Sent as LTR
15-6
Appendix
● Communication
Protocol
Cassette Feeding Module-N1 (Optional)
● Paper Feeding System
500 sheets x 1 drawer (21 lb bond (80 g/m2))
● Acceptable Paper
Stock
» p. 3-1
● Power Source
From the main unit
● Dimensions
6 1/4" (H) x 17 3/8" (D) x 20 1/2" (W) (158 mm (H) x
440 mm (D) x 520 mm (W))
● Weight
Approx. 11.46 lb (5.2 kg)
Card Reader-E1 (Optional)
● Available Cards
Magnetic type card, Optical type card
● Card Readout Method
Magnetic/Optical readout
● Magnetic Card
Reading Direction
Inserting Direction
● Store/Replay
Replay
● Power Source
From the main unit
● Dimensions
1 1/4" (H) x 4" (D) x 3 1/2" (W) (32 mm (H) x 100 mm (D)
x 88 mm (W))
● Weight
Approx. 5/8 lb (295 g)
NOTE
Appendix
Specifications are subject to change without notice.
15-7
Index
Symbols & Numerics
Cleaning the ADF automatically 12-6
2 on 1 key 1-4
Clear key 1-4
Clearing Jams 13-1
A
Accessing the Setting Menu 14-3
Additional Functions key 1-4
Address Book
Storing/Editing 4-27
Address Book key 1-6
Using 4-21
Document jams 13-1
Paper jams 13-3
Coded Dial Codes
Deleting 4-38
Editing 4-35
Registering 4-28, 4-33
Storing/Editing 4-27
Using 4-17
ADDRESS BOOK SET. 14-21
Coded Dial key 1-6, 4-17
ADF 1-1, 2-6
Collate key 1-4
ADJUST./CLEANING 14-35
COMMON SETTINGS 14-5
Auto Clear Time 1-15
Components 1-1
Automatic document feeder 1-1
Contacting Your Local Authorized Canon
Dealer 13-20
Available Features ii
Copy Features ix
C
COPY key 1-3
CHECK DOCUMENT message 13-1
Copy Ratio key 1-4
Cleaning machine 12-1
COPY SETTINGS 14-10
Exterior 12-1
Fuser roller 12-2
Scanning area 12-3
Copying 6-1
Customer support
Users in Canada xxxiii
Users in the U.S.A. xxx
Utilisation au Canada xxxv
Appendix
15-8
D
F
Daylight Saving Time 1-18
Favorites Buttons
Delayed TX key 1-6
Density
Copying 6-4
Sending 4-5
Density key 1-4
Using 4-25
Fax Features vii
Fax Numbers
Registering 4-28
Faxes
Department ID Management 11-1
After using the machine 11-2
Before using the machine 11-1
Direct Sending 4-54
Direct TX key 1-6, 4-55
Document
Receiving 5-1
Frame Erase key 1-4
Front cover 1-2
G
Group Addresses 4-40
Handling 2-1
Jams 13-1
Loading 2-4
Requirements 2-1
Scanned area 2-3
Adding destination 4-43
Changing name 4-47
Deleting destination 4-45
Deleting group 4-49
Using 4-19
Document delivery tray 1-1
Document feeder tray 1-1
H
Documents
Hook key 1-6, 4-53
Sending 4-1
E
Energy Consumption in the Sleep Mode 1-11
Error codes 13-12
Error indicator 1-4
I
If a Power Failure Occurs 13-19
Image Quality
Copying 6-3
Sending 4-3
Appendix
Image Quality key 1-4
15-9
J
N
Jam Location indicator 1-3, 13-1
Numeric keys 1-4
Jams
Document 13-1
Paper 13-3
Using 4-12
O
OK key 1-3
L
ON/OFF key 1-4
LCD 1-3
One-Touch Keys 1-6
Messages 13-6
Standby Mode 1-7
Deleting 4-38
Editing 4-35
Registering 4-28, 4-33
Storing/Editing 4-27
Using 4-15
Left cover 1-2
Legal 3-1
Letter 3-1
Loading
Document 2-4
Envelopes 3-5
Paper 3-5
Operation panel 1-1, 1-3
Main operation panel 1-3
Send operation panel 1-6
Operation panel Power Switch 1-10
Optional Card Reader 11-3
M
After using the machine 11-3
Before using the machine 11-3
Machine Components 1-1
Machine Settings 14-1
Main Operation Panel 1-3
Main power switch 1-2
Maintaining the Toner Cartridge 1-8
Maintenance 12-1
Manual Sending 4-51
Manuals for the machine i
Menu
Accessing 14-3
Setting 14-5
OUT OF TONER/CHANGE TONER
message 12-9
P
Paper
Guidelines 3-4
Jams 13-3
Loading 3-5
Printable area 3-3
Requirements 3-1
Paper delivery tray 1-1
Paper drawer 1-1
Appendix
15-10
PAPER JAM message 13-3
S
Paper Select indicator 1-3
SCAN key 1-3
Paper Select key 1-4
Scan Settings 4-3
Pause key 1-6
PC Fax Feature xii
Copying 6-3
Sending 4-3
PC Faxing 9-1
Scanner Feature xi
Platen glass 1-2, 2-4
Scanning 8-1
Power Failure 13-19
Scanning area 1-2, 2-3
Power indicator 1-4
SEND key 1-3
Print Media 3-1
Send Operation Panel 1-6
Printable Area 3-3
Send Settings 4-7
Printer Feature xi
Sending Documents 4-1
PRINTER SETTINGS 14-30
Sending Features iv
Printing 7-1
Service Call Message 13-20
Printing USER’S DATA LIST 14-1
Setting Menu 14-5
Processing/Data indicator 1-4
Accessing 14-3
Setting Paper Type and Size 3-8
R
Recall key 1-6
Paper drawer 3-8
Stack bypass 3-11
Receiving Fax/I-Fax Documents 5-1
Sleep mode 1-11, 1-13
Remote UI 10-1
Slide guides 1-1, 2-6
Remote UI Feature xii
Slide guides for stack bypass 1-2, 3-7
Replacing the Drum Unit 12-12
Specifications 15-1
Replacing the Toner Cartridge 12-9
REPORT SETTINGS 14-38
Appendix
Reset key 1-4
15-11
Card Reader 15-7
Copier 15-3
Facsimile 15-3
General 15-1
Optional drawer 15-7
Printer 15-3
Send Feature 15-6
Telephone 15-5
Specifying Destinations 4-11
Two-Sided
Stack bypass 1-2, 3-5
Sending 4-6
Extension 1-2
Slide guide 1-2
Two-Sided key 1-4
TX/RX SETTINGS 14-12
Stack bypass extension 1-2, 3-6
Standby mode
Copy 1-7
Scan 1-7
Send 1-7
Start key 1-4
U
USER DATA LIST 14-1
Printing 14-1
Using
Address Book key 4-21
Coded dial codes 4-17
Favorites buttons 4-25
Group addresses 4-19
Numeric keys 4-12
One-touch keys 4-15
Stop key 1-4
Storing/Editing
Address Book 4-27
Coded Dial Codes 4-27
Group Addresses 4-40
One-Touch Keys 4-27
System Manager Settings xi, 11-1
V
System Monitor key 1-4
View Settings key 1-4
SYSTEM SETTINGS 14-40
Z
T
Time Zone 1-17
TIMER SETTINGS 14-34
Zoom Ratio 6-6
Preset Zoom 6-6
Zoom Designation 6-7
Timer Settings 1-13
Tone key 1-4
Toner Cartridge 1-8
Transcription Roller 12-7
Transporting the Machine 12-14
Troubleshooting 13-1
Appendix
15-12
Series
Basic Operation Guide
What Can I Do with This Machine?
Before Using the Machine
Document Handling
Series
Print Media
Sending Documents
Receiving Fax/I-Fax Documents
CANON INC.
Basic Operation Guide
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France
CANON COMMUNICATION & IMAGE FRANCE S.A.S.
Copying
Printing
Scanning
PC Faxing
Remote UI
12, rue de l’Industrie 92414 Courbevoie Cedex, France
System Manager Settings
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
Maintenance
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
Troubleshooting
CANON ITALIA S.p.A.
Via Milano, 8 20097 San Donato Milanese (MI) Italy
Machine Settings
CANON ESPAÑA, S.A.
c/ Joaquín Costa 41, 28002 Madrid, Spain
Appendix
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400, Miami, Florida 33126 U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
ENG
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
FT5-0584 (000)
© CANON INC. 2006
PRINTED IN JAPAN OR CHINA
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
ENG