Sharp AR-5220 Specifications

CODE : 00ZARM205/A1E
DIGITAL COPIER
AR-5220
MODEL
AR-5220
AR-5220
(With SPF and ARD24 installed)
CONTENTS
[ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[ 2 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[ 3 ] CONSUMABLE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[ 4 ] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . 4 - 1
[ 5 ] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 5 - 1
Parts marked with “ “ are important for maintaining the safety of the set.
Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
!
CONTENTS
[1] GENERAL
1. Note for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1
[2] SPECIFICATIONS
1. Copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1
[3] CONSUMABLE PARTS
1. Supply system table . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1
2. Environmental conditions . . . . . . . . . . . . . . . . . . . . . . . .3-2
3. Production number identification . . . . . . . . . . . . . . . . . .3-2
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
2. Internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1
3. Operation Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
4. Motor, solenoid, clutch . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
5. Sensor, switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
6. PWB unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
7. Cross sectional view . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6
[5] UNPACKING AND INSTALLATION
1. Installing conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
2. Removal of protective material and fixing screw . . . . . .5-1
3. Installing procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1
4. Removal and storage of fixing screw . . . . . . . . . . . . . . .5-2
5. Changing the copy paper size in the tray . . . . . . . . . . . .5-3
[1] GENERAL
•poorly ventilated
1. Note for servicing
Pictogram
The label (
) in the fusing area of the machine indicates the
following:
: Caution, risk of danger
: Caution, hot surface
A. Warning for servicing
•exposed to direct sunlight
•The fusing area is hot. Exercise care in this area when removing misfed
paper.
•Do not look directly at the light source. Doing so may damage your eyes.
B. Cautions for servicing
•Do not switch the machine rapidly on and off. After turning the machine
off, wait 10 to 15 seconds before turning it back on.
•Machine power must be turned off before installing any supplies.
•Place the machine on a firm, level surface.
•Do not install the machine in a humid or dusty location.
•When the machine is not used for a long time, for example, during
prolonged holidays, turn the power switch off and remove the power
cord from the outlet.
•When moving the machine, be sure to turn the power switch off and
remove the power cord from the outlet.
•Do not cover the machine with a dust cover, cloth or plastic film while the
power is on. Doing so may prevent heat dissipation, damaging the
machine.
•Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous laser radiation
exposure.
•The socket-outlet shall be installed near the machine and shall be easily
accessible.
•subject to extreme temperature or humidity changes, e.g., near an air
conditioner or heater.
C. Note for installation place
Improper installation may damage the machine. Please note the
following during initial installation and whenever the machine is moved.
Caution : If the machine is moved from a cool place to a warm place,
condensation may form inside the machine. Operation in this
condition will cause poor copy quality and malfunctions. Leave
the machine at room temperature for at least 2 hours before
use.
Do not install your machine in areas that are:
•damp, humid, or very dusty
The machine should be installed near an accessible power outlet for
easy connection and disconnection.
Be sure to connect the power cord only to a power outlet that meets the
specified voltage and current requirements. Also make certain the outlet
is properly grounded.
Note : Connect the machine to a power outlet which is not used for other
electric appliances. If a lighting fixture is connected to the same
outlet, the light may flicker.
Be sure to allow the required space around the machine for servicing
and proper ventilation.
8" (20cm)
8"
(20cm)
AR-5220 GENERAL 1-1
8"
(20cm)
!"#$%
[2] SPECIFICATIONS
D. First copy time
(1) Basic speed
1. Copy mode
First copy time
7.2sec (A4, 8.5" X 11"/1st tray/with OC)
(Polygon motor ready state)
A. Type
Type
Desk-top
E. Document
Paper exit
Wing less
Max. document size
A3, 11" X 17"
B. Machine composition
Document reference
position
Left side center
AR-5220
20-CPM multi function model
Detection (Platen)
None
AR-M205
20-CPM multi function model
Detection size
A3, B4, A4, A4R, B5, B5R, A5
11" X 17", 8.5" X 14", 8.5" X 13", 8.5" X 11",
8.5" X 11"R, 8.5" X 5.5"
(8.5" X 13" is detected by key input.)
(1) Option
Machine
Model
250 sheets paper feed unit
AR-D24
(1) SPF/R-SPF
250 sheets x 2 paper feed unit AR-D25
SPF
AR-SP6
RSPF
AR-RP6
Original cover
AR-VR5
Dual function board
AR-EB7
Standard/Option
Option
SPF: AR-SP6 (AR-5220 only)
RSPF: AR-RP6 (AR-M205 only)
Document load
capacity
40 sheets (Thickness 4mm or less)
Document size
(Max. ~ Min.)
A3 ~ A5
11" x 17" ~ 8.5" x 5.5"
(8.5" x 5.5", duplex is inhibited.)
Document
replacement speed
AR-M205:20 sheets/min
AR-5220:20 sheets/min
(A4 , 8.5" x 11" normal copy)
AR-M205 only
Network expansion kit
AR-NB2
Available from October
PS3 expansion kit
AR-PK1/N
option for AR-NB2
256MB optional memory
AR-SM5
C. Copy speed
(1) Scan One Print many
AR-M205 / AR-5220
Document set/Paper Face up, Center reference,
feed direction
Paper feed from the top
Available
Condition: Copy speed in the normal copy from all the paper feed ports
including the manual paper feed port.
(2) Continuous copy speed (Sheets/min)
Document weight
56 ~ 90g/m², 15 ~ 24 lbs
Document size
detection
On the document feed tray
Document mixture
Copy mode: Not Available
a. AR-M160
F. Paper feed
Paper size
Normal
Enlargement
(200%)
Reduction
(50%)
A3
9
9
9
Copy size
(Max. ~ Min.)
B4
10
10
10
Paper feed system
1 cassette + Multi manual paper feed
A4
16
16
16
Paper feed capacity
AR-M205
A4R
12
12
12
250 x 2 (Paper feed tray)
+ 100 (Multi bypass feed tray)
AR-5220
250 x 1 (Paper feed tray)
+ 100 (Multi bypass feed tray)
Cassette
section
Only empty detection available
Manual tray
Only empty detection available
AB
system
A3 ~ A6
11" x 17" ~ 8.5" x 5.5"
B5
16
16
16
B5R
14
14
14
11" X 17"
9
9
9
8.5" X 14"
10
10
10
8.5" X 13"
11
11
11
8.5" X 11"
16
16
16
(1) Paper feed section of the copier
8.5" X 11"R
12
12
12
8.5" X 5.5"
16
16
16
Paper feed
size
A3, B4, A4, A4R, B5, B5R, A5
11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11",
8.5" x 11"R, 8.5" x 5.5"
(For A5 and 8.5" x 5.5", only No. 1 tray available.)
Paper size
Normal
Enlargement
(200%)
Reduction
(50%)
Side front
Front
A3
11
11
11
Paper feed
capacity
250 sheets
(56 ~ 90g/m² equivalent) (15 ~ 21 lbs.)
B4
12
12
12
Detection
A4
20
20
20
Paper empty detection available, size detection
(by key input)
A4R
14
14
14
Weight
56 ~ 90g/m² (15 lbs. ~ 21 lbs.)
Special paper Recycled paper
Inch
system
Remaining quantity
detection
b. AR-M205 / AR-5220
AB
system
Inch
system
B5
20
20
20
B5R
16
16
16
11" X 17"
10
10
10
8.5" X 14"
12
12
12
8.5" X 13"
12
12
12
8.5" X 11"
20
20
20
8.5" X 11"R
15
15
15
8.5" X 5.5"
20
20
20
AR-5220 SPECIFICATIONS 2-1
!"#$%
(2) Manual paper feed section
K. Print density
Paper feed
size
A3 ~ A6, 11" x 17" ~ 8.5" x 5.5"
Density mode
Auto / Text / Photo
5 steps (Text / Photo)
Paper feed
capacity
100 sheets(56 ~ 80g/m²)
No. of manual
adjustment
Resolution
Detection
Size detection not available,
paper empty detection available
Writing: 600 x 600dpi
Reading: 600 (main) x 600 (sub) (PHOTO mode)
600 (main) x 300 (sub) (AE mode)
Weight
56 ~ 200g/m² (15 ~ 34 lbs.)
Gradation
Reading: 256 gradations
Writing: Binary
Toner save mode
Set by the user program
Special paper Recycled paper, OHP film, labels
Paper feed
Single except for recycled paper
L. Void width
(3) Option paper feed unit
1-step paper feed unit 2-step paper feed unit
Model
Paper feed size
AR-D24
A3, B4, A4, A4R, B5, B5R
11" x 17", 8.5" x 14", 8.5" x 13",
8.5" x 11", 8.5" x 11"R
Capacity
(56 ~ 80gm²)
About 250 sheets x
1 step
Paper weight
56 ~ 90 g/m² (15 ~ 21 lbs.)
Moisture preserving
heater
None
About 250 sheets x
2 steps
Lead edge 1 ~ 4mm,
rear edge 4mm or less,
both sides 4mm or less
Image loss
4mm or less
M. Auto duplex
Standard/
Option
Standard provision (AR-M205 only)
(D → D / D → S enable only when RSPF is installed)
Not available for AR-5220
N. Paper exit / finishing
Paper empty detection Available
Paper exit section
capacity
Paper size setting
User setting
Paper size detection:None
External dimensions
(W x D x H)
590 x 471 x 88mm
590 x 471 x 173.5mm
Weight
About 4.7kg
About 10kg
Special paper
Recycled paper
Power
Supplied from the machine
G. Job speed
S-S (1st step)
Void area
AR-D25
100% (document replacement rate)
Full detection
None
Finishing
Dual function board:
Option (AR-EB7)
Electronic sort
capacity
A4 (8.5" x 11") standard document 100 sheets
Offset function
Available (by the shifter)
Staple function
None
(1) Electronic sort board (Option)
Electronic sort
Condition:With SPF/RSPF A4/Letter Normal 1cassette
H. Multi copy
Max. number of multi copy
Sorting
100 sheets of A4 standard
documents
Grouping
100 sheets of A4 standard
documents
999 sheets
I. Warm-up time
Warm-up time
Face down 250 sheets
Rotation copy
If there is paper of same size as the document,
the image is rotated to copy even though the
paper is set in the different direction from the
document direction.
2 in 1, 4 in 1
Copies of 2 pages or 4 pages are integrated into
one surface. Divided by solid lines,
(Selectable by the user program.)
Edge erase
Images surrounding the document are erased
when copying. (Adjustable in 5 ~ 20mm by the
user program.)
45 sec
Pre-heat
Available
Jam recovery
Within 45 sec
J. Copy magnification ratio
Fixed
magnification
ratio
AB system:
50, 70, 81, 86, 100, 115, 122, 141, 200%
Inch system:
50, 64, 77, 95, 100, 121, 129, 141, 200%
Center erase
Zooming
25 ~ 400%
SPF/RSPF(50 ~ 200%)
The image at the center is erased when copying.
(Adjustable in 5 ~ 20mm by the user program.)
Margin shift
Independent
zooming(vertical)
Available (25 ~ 400%)
SPF/RSPF(50 ~ 200%)
Binding margin is made at the left edge of the set
documents.
(Adjustable in 5 ~ 20mm by the user program.)
Independent zooming
(horizontal)
Available (25 ~ 400%)
SPF/RSPF(50 ~ 200%)
Memory for
electronic sort
16MB
* Memory loading
capacity
A4 standard 100 pages
Memory expansion
DIMM memory slot x 1, max. 256MB x 1 slot +
16MB (Max. 272MB in total)
USB2.0
Standard provision of E-sort
SPLC (JBIG-GDI)
Supported when E-sort is installed.
ROPM
Supported when E-sort is installed.
AR-5220 SPECIFICATIONS 2-2
&
!"#$%
O. Additional functions
R. External view
APS
O
AMS
O
External dimensions
(W x D x H)
590 x 577 x 520 mm(AR-M205)
590 x 577 x 470 mm(AR-5220)
Occupying area
(W x D)
590 x 531mm
(When the manual tray is installed.)
Weight
About 31.3kg (AR-5220)
About 35.1kg (AR-M205)
Auto tray switching
O
Memory copy
O
Rotation copy
E-sort
O
Rotation sort
X
Option
S. Power source
Independent
zooming
O
Voltage
AC120V, 220V, 230V, 240V ±15%
1 set 2 copy
O
Frequency
50/60Hz common
Enlargement invalid/SPF invalid (Patent
rotation)
Binding margin
Default AB series:
10mm (5, 10, 15, 20mm)
Inch series: 1/2 inch (1/4, 1/2, 3/4, 1 inch)
Edge erase
Default AB series:
10mm (5, 10, 15, 20mm)
Inch series: 1/2 inch (1/4, 1/2, 3/4, 1 inch)
Center erase
Default AB series:
10mm (5, 10, 15, 20mm)
Inch series: 1/2 inch (1/4, 1/2, 3/4, 1 inch)
Black/white
reverse
X
T. Power consumption
Max. power consumption
* EnergyStar conformity
Average power consumption in Less than 550W
operation
Power consumption when
5W(Not include option)
standby
Energy consumption efficiency Less than 25W
U. Digital performance
Resolution
2in1/4in1
Sorter
O
Offset function (Shifter) provided
Preheating
O
The conditions are set by the user
program.
Auto shut-off
O
The conditions are set by the user
program.
User programming
O
Total counter
O
Supports Total counter, Scan counter, and
Copy counter.
Coin vendor
support
O
(Supports I/F only.)
Auditor support
O
(Supports I/F only.)
Data resolution
Option memory
Duplex
O
(Standard provision for the model of 20sheet model only)
Printer driver
Toner save
O
(Set according to the destination)
Department
management
O
(Copy: 20 Dept.)
O
X
Gradation
Reading
600 x 600dpi (PHOTO mode)
600 x 300dpi (AE mode)
Writing
600 x 600dpi
Reading
256 gradations
Writing
Binary
Memory
Simplex:16MB Duplex:32MB
Hard disk
None
V. Printing function
: Available
: Not available
:Installation of the option is required.
P. Other specifications
Photoconductor type
OPC (Organic Photo Conductor)
Photoconductor drum dia.
30mm
Copy lamp
Cold cathode fluorescent lamp (CCFL)
Developing system
Dry 2-component magnetic brush
development
Charging system
Saw teeth charging
Transfer system
(+) DC corotron
Separation system
(-) DC corotron
Fusing system
Heat roller
Cleaning system
Contact blade
Print speed
<Standard>12ppm
(With the AR-EB7 installed)
20ppm (AR-5220) / 20ppm (AR-M205)
600dpi
16MB (with the AR-EB7 installed)
256MB (AR-SM5) can be added to the AR-EB7.
Two drivers for the case when the AR-EB7 is
installed and when it is not are automatically
installed by plug & play.
<Standard> SHARP GDI driver
<with the AR-EB7 installed> SPLC driver
W. Scanner function
Type
Scan system
Light source
Resolution
Document
Effective scan range
Scan speed
Input data
Output data
Scan color
Protocol
Interface
Q. Package form
Body
1200W
Body / Accessories
Scanner utility
Drop-out color
Scanner button
Supported OS
Void area
WHQL support
AR-5220 SPECIFICATIONS 2-3
Flat bed color scanner
Document table/document feed unit
White CCFL
Basic 600 x 1200dpi
Set range: 50 ~ 9600dpi
Sheet/Book
OC/SPF: about 297(length) x 431(width) mm
OC/SPF: 2.88msec/line (Color)
1bit or 12bit
1bit or 8bit
Black and white binaryGray scaleFull color
TWAIN/WIA (XP only) / STI
USB1.1
USB2.0
(Option support: High-speed mode/Full speed
mode (Switched by the user program.))
(Supported when E-sort is installed)
Sharp Desk/Button Manager
Provided
Provided (6)
Windows98/ME/2000/XP
Lead edge/rear edge (2.5mm) on the driver
side Left/right: 3.0mm
Yes
3 CONSUMABLE PARTS
AR5220 SERIES SRU (LAG)
No.
ITEM
1
Toner Cartridege (Black) with IC
CONTENT
TONER
X10
LIFE
19K X 10
MODEL
AR-016LT
REMARKS
Can be used for Zebra (AR-5015,AR5015N)
Life: 6% coverage, LT, toner save
2
Toner kit
TONER
IC CHIP
Filling Hose
Toner Cap23
Toner Cap27
X20
X20
X1
X20
X20
19K X 20
AR-016RT
Can be used for Zebra (AR-5015,AR5015N)
3
Developer
Developer
X10
50K X10
AR-202LD
Can be used for Zebra (AR-5015,AR5015N)
4
Drum
Drum
X1
Drum Fixing Plate X1
50K
AR202DM
Can be used for Zebra (AR-5015,AR5015N)
CONTENT
TONER
X10
LIFE
16K X 10
MODEL
AR-202MT
REMARKS
Life: 6% coverage, LT
50K X10
AR-202MD
Can be used for Panther Ref. (AR-207,AR-164)
50K
AR202DR
Can be used for Panther Ref. (AR-207,AR-164)
ARM205 SERIES (SEC/LAG)
No.
ITEM
1
Toner Cartridege (Black) with IC
2
Developer
Developer
X10
3
Drum
Drum
X1
Drum Fixing Plate X1
)
!"#
!$%&'(
3. Production number identification
A. Transport conditions
<Toner cartridge>
(1) Transport conditions
The label on the toner cartridge shows the date of production.
Humidity (%)
2. Environmental conditions
Production
place
Serial
number
Year/
Month/
Day
Ver.No.
Temperature
Humidity (%)
(2) Storage conditions
<Drum cartridge>
The lot number, printed on the front side flange, is composed of 6 digits,
each digit showing the following content:
Temperature
1
B. Use conditions
1
2
3
4
5
6
Alphabet
Indicates the model conformity code. A for this model.
2
Number
Indicates the end digit of the production year.
Humidity (%)
3
Number or X, Y, Z
Indicates the month of packing.
Use environment
conditions
X stands for October, Y November, and Z December.
4/5
Number
Indicates the day of the month of packing.
6
Alphabet
Indicates the production factory. "A" for Nara Plant, “C“ for
SOCC
Temperature
C. Life(packed conditions)
Photoconductor drum (36 months from the production month)
Developer, toner (24 months from the production month)
AR-5220 CONSUMABLE PARTS 3-2
!"#$%
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance
1
17
6
1
15
2
16
3
5
3
9
4
7
10
14
11
8
1
4
7
10
13
16
Document feeder cover (when the SPF/
RSPF is installed) /document cover
(when the document cover is installed)
Power switch
Front cover
Side cover handle
Bypass tray extension
Parallel port
12
13
2
Document glass
3
Handles
5
8
11
14
17
Operation panel
Paper trays
Bypass tray guides
Charger cleaner
USB 2.0 port (when the dual function
board is installed)
6
9
12
15
Paper output tray
Side cover
Bypass tray
USB 1.1 port
2. Internal
18 19
20
21
22
23
24
26
28
27
29
25
18
21
24
27
Document feeder tray
(when the SPF/RSPF is installed)
Right side cover
(when the SPF/RSPF is installed)
Toner cartridge lock release lever
Fusing unit release levers
19
22
25
28
Original guides
(when the SPF/RSPF is installed)
Exit area
(when the SPF/RSPF is installed)
Toner cartridge
Photoconductive drum
20
23
26
29
AR-5220 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-1
Feeding roller cover
(when the SPF/RSPF is installed)
Reversing tray
(when the RSPF is installed)
Roller rotating knob
Fusing unit paper guide
'
!"#$%
4. Motor, solenoid, clutch
1
2
3
4
5
6
7
8
9
10
11
12
13
18
17
No.
1
Name
Code
16
15
14
Function operation
Mirror motor
MRM
Drives the optical mirror base (scanner unit).
2
Shifter motor
SHTM
3
Toner motor
TM
4
Duplex motor
DPX
Switchback operation and paper exit motor in duplex.
5
Cooling fan motor
CFM
Cools the inside of the machine.
6
Main motor
MM
Drives the machine.
7
1st tray paper feed clutch
8
PS clutch
Shifts the paper exit tray.
Toner supply
CPFC1
Drive the pick up roller
RRC
Drives the resist roller
9
Paper feed solenoid
CPSOL1
Solenoid for paper feed from cassette
10
Resist roller solenoid
RRS
Resist roller rotation control solenoid
11
Manual paper transport clutch
MPTC
Drives the manual paper transport roller.
12
Manual paper feed clutch
MPFC
Drives the manual paper feed roller.
13
Manual paper feed solenoid
MPFS
Manual paper feed solenoid
14
2nd tray transport clutch
CPFC2
Drives the 2nd tray transport roller.
15
2nd tray transport solenoid
FSOL1
2nd tray transport solenoid
16
2nd tray paper feed clutch
CPFC1
Drives the 2nd tray paper feed roller.
17
2nd tray paper feed solenoid
PSOL2
2nd tray transport solenoid
18
Exhaust fan motor
VFM
Cools the inside of the machine.
AR-5220 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-3
!"#$%
5. Sensor, switch
1
2
3
4
5
17
16
6
7
8
15
14
9
10
13
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Name
Mirror home position sensor
Side door switch
Paper exit sensor (paper exit side)
Shifter home position sensor
Paper exit sensor (DUP side)
Thermistor
Thermostat
Toner density sensor
2nd tray detection switch
Manual sensor
2nd tray door open/close sensor
2nd tray door paper pass sensor
2nd tray paper empty sensor
Paper in sensor
Cassette empty
Front cover SW
Power switch
Code
MHPS
DSWR
POD1
SFTHP
PDPX
RTH
TCS
MPED
DRS2
PPD2
CSS2
PIN
MAIN SW
12
11
Function operation
Detects the mirror (scanner unit) home position.
Side door open detection
Detects paper exit.
Shifter home position detection
Paper transport detection
Fusing section temperature detection
Fusing section abnormally high temperature detection
Toner quantity detection
2nd tray detection
Manual transport detection
2nd tray door open/close detection
2nd tray paper entry detection
2nd tray paper empty detection
Paper transport detection
Tray paper entry detection
Front cover open detection
Turns ON/OFF the main power source.
AR-5220 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-4
(
!"#$%
6. PWB unit
2 6
3
1
4
5
10
7
9
8
No.
1
2
3
4
5
6
7
8
9
10
Name
Copy lamp Inverter PWB
I / F PWB
CCD sensor PWB
Main control PWB
Tray PWB
IMC2 PWB
2nd cassette PWB
High voltage PWB
Power PWB
Operation main PWB
Function operation
Copy lamp control
USB1.1, IEEE1284 I/F
Image scanning
Main control PWB
Shifter motor control
Electronic sort, USB2.0 << Option:AR-EB7>>
2nd cassette control
High voltage control
AC power input/DC power control
Operation panel input/Display, operation panel section control
AR-5220 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-5
)
!"#$%
7. Cross sectional view
1
2
3
4
5
6
18
7
8
9
10
11
12
13
14
15
23
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Name
Copy lamp
Copy lamp unit
LSU unit
Lens unit
MC holder unit
Paper exit roller
Transport roller
Upper heat roller
Lower heat roller
Waste toner transport roller
Drum unit
Transfer charger unit
DUP follower roller
Duplex transport roller
Resist roller
Manual paper feed tray
Manual paper pick up roller
No. 2/3 mirror unit
Manual transport roller
2nd tray paper transport roller
2nd tray paper pick up roller
(semi-circular roller)
1st tray paper feed roller
(semi-circular roller)
MG roller
22 21 20 19 17 16
Function/Operation
Image radiation lamp
Operates in synchronization with No. 2/3 mirror unit to radiate documents
sequentially.
Converts image signals into laser beams to write on the drum.
Reads images with the lens and the CCD.
Supplies negative charges evenly on the drum.
Used to discharge paper.
Used to transport paper.
Fuses toner on paper (with the teflon roller).
Fuses toner on paper (with the silicon rubber roller).
Transports waste toner to the waste toner box.
Forms images.
Transfer images (on the drum) onto paper.
Transports paper for duplex .
Takes synchronization between the paper lead edge and the image lead edge.
Manual paper feed tray
Picks up paper in manual paper feed.
Reflects the images from the copy lamp unit to the lens unit.
Transports paper from the manual paper feed port.
Transports paper from the 2nd tray.
Picks up paper from the 2nd tray.
Picks up paper from the 1st tray.
Puts toner on the OPC drum.
AR-5220 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-6
!"
[5]UNPACKING AND INSTALLATION
2) Open the front cover.
•Hold the both sides and pull down to open.
1.Installing conditions
A.Copier installation
Do not install your copier in areas that are:
•damp, humid, or very dusty
•exposed to direct sunlight
•poorly ventilated
•subject to extreme temperature or humidity changes, e.g., near an air
conditioner or heater.
•Be sure to allow the required space around the machine for servicing
and proper ventilation.
3) Loosen the screw and remove the developer cartridge.
B.Power source
•Use an exclusive-use power outlet. If the power plug of this machine is
inserted into a power outlet commonly used with other illumination
units, flickers of the lamp may be result. Use a power outlet which is not
used commonly with any illumination units.
•Avoid complex wiring.
C.Grounding wire connection.
•To avoid danger, be sure to connect a grounding wire. If no grounding
wire is connected and a leakage occurs, a fire or an electric shock may
be result.
4) Remove the developer tank from the developer cartridge.
2.Removal of protective material and fixing
screw
1) Remove all tapes and protective material.
•Remove all tapes, then open the document cover and remove the
protective material of sheet shape
2) Remove the fixing screw.
•Use a coin to remove the fixing screw.
•The fixing screw is required when transporting the machine. Keep it in
the tray. (Refer to the later description.)
5) Supply developer into the developer tank while rotating the MG roller
in the arrow direction.
MG roller
*
3.Installing procedure
Shake the developer bag enough before opening it.
Hook
A.Developer cartridge installation
1) Open the manual tray, and open the side cover.
Note: Check that the DV seal is free from developing agent. If developing
agent is attached to the DV seal, clean it carefully.
Check to insure that the hook is engaged in two positions.
6) Attach the developer tank to the developer cartridge.
* After supplying developer into the developer cartridge, do not tilt or
shake the developer cartridge.
7) Attach the developer cartridge to the copier, and fix it with the screw.
AR-5220 UNPACKING AND INSTALLATION 5-1
#
!"
B.Toner cartridge installation
4.Removal and storage of fixing screw
1) Shake the toner cartridge several times horizontally, and remove the
tape.
* Do not hold the shutter lever when shaking.
* After removing the tape, do not tilt or shake the toner cartridge.
1) Lift the knob and gently pull out the tray.
4 or 5 times
Shutter
Tape
Handle
2) Hold the paper pressure plate and turn the fixing screw in the arrow
direction.
2) Attach the toner cartridge to the copier.
3) Store the fixing pin and the fixing screw in the tray.
•Store the fixing screw which was removed in the above procedure 2 and
the fixing screw which was removed in procedure 2 of 2.
•Removal of protective material and fixing screw in the storage place in
the tray.
3) Pull the shutter lever.
Pressure
plate
lock
Close the front cover A, then close the side cover B.
•When closing the front cover, gently press the both sides.
•When closing the side cover, hold the knob.
•When closing the covers, be sure to close the front cover first, then
close the side cover. If closed in a wrong sequence, the covers may be
broken.
AR-5220 UNPACKING AND INSTALLATION 5-2
Screw
$
!"
5. Changing the copy paper size in the tray
Note
•The paper size setting cannot be changed when the machine has
stopped temporarily due to running out of paper or a misfeed, or during
interrupt copying.
•During printing (even in copy mode), the paper size setting cannot be
changed.
•5-1/2" x 8-1/2" size paper can only be selected in upper paper tray.
•Do not load paper that is a different size than the paper size setting.
Copying will not be possible.
1) Hold down the [PAPER SIZE ENTER] key for more than 5 seconds to
set the selected paper size.
The currently selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
steadily.
All other indicators will go out.
GINAL
PAPER
SIZE
11X17
8½X14
8½X11
8½X5½
8½X11
EXTRA
4) Squeeze the lock lever of the front guide and slide the front guide to
match the width of the paper, and move the left guide to the
appropriate slot as marked on the tray.
Left guide
Front guide
•The front guide is a slide-type guide. Grasp the locking knob on the
guide and slide the guide to the indicator line of the paper to be loaded.
•The left guide is an insert-type guide. Remove it and then insert it at the
indicator line of the paper to be loaded.
•When using 11" x 17" sized paper store the left guide in the slot at the
left front of the paper tray.
2) Use the [TRAY SELECT] key to select the paper tray for which you
wish to change the paper size setting.
Each time the [TRAY SELECT] key is pressed, a paper tray will be
indicated with a blinking paper feed location indicator.
6) Press the [START] key and then the [PAPER SIZE ENTER] key.
To change the paper size setting of another tray, repeat steps 2 to 3
after pressing the [START] key.
TRAY
SELECT
START
3) Use the [ORIGINAL SIZE ENTER] key to select the paper size.
The indicator of the selected paper size lights up.
GINAL
PAPER
SIZE
11X17
ORIGINAL SIZE 8½X14
ENTER
8½X11
8½X5½
8½X11
EXTRA
Note
Affix the paper size label for the paper size selected in step 3 to the label
position on the right end of the tray.
AR-5220 UNPACKING AND INSTALLATION 5-3
!
CAUTION FOR BATTERY DISPOSAL
(For USA,CANADA)
Contains lithium-ion battery. Must be disposed of properly.
Remove the battery from the product and contact
federal or state environmental
agencies for information on recycling and disposal options.
"
COPYRIGHT c 2003 BY SHARP CORPORATION
All rights reserved.
Printed in Japan.
No part of this publication may be reproduced,
stored in a retrieval system, or transmitted,
in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise,
without prior written permission of the publisher.
Trademark acknowledgments
Windows and Windows NT are trademarks of Microsoft Corporation in the U.S.A.
and other countries.
IBM and PC/AT are trademarks of International Business Machines Corporation.
PCL is a trademark of Hewlett-Packard Company.
Pentium is a registered trademark of Intel Corporation.
All other trademarks and copyrights are the property of their respective owners.
SHARP CORPORATION
Digital Document System Group
Products Quality Assurance Department
Yamatokoriyama, Nara 639-1186, Japan
2003 June Printed in Japan N