Samsung UN32ES6500 E- User manual

SERIES[§
LEO TV
user manual
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _ ____ Serial No. _ _ _ __
'%
If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
A detailed User's Manual1s built into your TV. For more information about how to view this e-Manual see page 33.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Product design and
specifications may be changed without notice.
Important Warranty Information Regarding
Wide screen format LED Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to fill the screen, if your model offers
this feature, with the images constantly in mot1on. Displaying stationary graphics and images on the screen, such as the dark sidebars on non-expanded
standard format television video and programmng, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics
and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven
aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to
view different formats as a full screen picture.
Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of format selection and use, as
well as burned in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Onginal Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessones, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
-In the United States: 1-800-SAMSUNG (1-800-726-7864)
- In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news bars at the screen bottom etc.),
or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will
affect image quality. To reduce risk of this effect, please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image in full screen. Use the TV set's picture format menu for the best possible match.
• Reduce brightness and contrast to avoid the appearance of after-images.
• Use all TV features designed to reduce image retention and screen burn. Refer to thee-Manual for details.
List of Features
• 30: This exciting new feature enables you to view 3D content.
• SMART HUB: Your gateway to all your content, integrated in one place.
-
Provides diverse entertainment choices.
-
Lets you control your entertainment life with an easy-to-use, user friendly user interface.
-
Gives you easy access to diverse apps, with more being added every day.
-
Lets you customize your 1V by grouping and sorting apps to your taste.
• AIIShare Play: Lets you access, view, or play photos, videos, or music located on USB devices,
digital cameras, cell phones, and PCs. PCs and cell phones can be accessed wirelessly, through your
wireless network.
• Anynet+ (HDMI-CEC): Allows you to control all connected Samsung devices that support Anynet+
with your Samsung 1V's remote.
• e-Manual : Provides a detailed, on-screen user's manual that 's built into your 1V. (page 33)
·
Accessories and Cables
~
Please make sure the following items are included with your TV. If any items are missing , contact your
dealer.
~
The items' colors and shapes may vary depending on the model.
~
Make sure that there are no accessories hidden behind or under packing materials after you open the
box.
Assembling the Stand Wire Holder
Input Cables (Sold Separately)
You will need one or more of these cables to connect your 1V to your antenna or cable outlet and your
peripheral devices (Biu-ray players, DVD players, etc.)
To purchase the RS232 cable, contact www. SamsungParts.com .
-4-----4·
··~~---:~~~)
•.orc
n .... . . .llt-1
.
Make sure you have the correct cable before plugging it in. Illustrations of com mon plugs and jacks
are below.
[~
~]
[Q]
.
.
Do not plug cables in upside down.
Be sure to check the orientation of the plug before plugging it in.
Warning
Wireless Keyboard (Sold Separately)
Providing Proper Ventilation for Your TV
When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls,
cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a
problem with the product caused by an increase in its internal temperature.
'' "- Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts
provided by Samsung Electronics only.
• If you use parts provided by another manufacturer, it may cause difficulties with the product or result
in injury caused by the product falling.
------------T-4
i~~.,;,5
'
4 inches :
I -
I'
;------------r--4
-----
in~h~;
----:
:
'
'
I
I
:
:
4 Inches
~~-~-= Jir-
4 1nches :
'
1
I J
~
.1 1,•
I~
, I!
!__
: 4 inches
:
I
-~- ~-~~~--- ~ _4_1~~~e_s_ 1 ~
_
_ _I_ ..
___
Other Warnings
·~-:t.
The actual appearance of the TV may differ from the images in this manual, depending on the model.
~'?t.
Be careful when you touch the TV. Some parts can be somewhat hot.
Installing the Stand
Stand Parts: 32, 40, 46 inches model only
(UN32ES6500 I UN40ES6500, UN40ES6580 I UN46ES6500, UN46ES6580)
@
~~~'··
·.
00)
'"'--'
~-~~
©~
(M4XL12)
Follow the steps below to connect the TV to the stand . For more detailed instructions, see the separate
stand installation guide.
ATIENTION
-~ @@)~ !
1
1
DO NOT USE 00 NOT USr
CHI:.rv'ICALS
GREASE
00 NOT
.JSlOIL
'
E)
1
'
'
~ Place a soft cloth over a table to protect the TV. and then
place the TV on the cloth screen side down.
~ Insert the Stand Guide into the slot on the TV's bottom.
SideView
(Correct assembly)
(Incorrect assembly)
.......... .......
,- -- -- --- - - -- ------- M_ _ .., .. _ _ _ .. ..
'
;
-~~-
..
\
~~
· -. -.. . . .
f:ll ~x4 (M4 X L1 2)
Stand Parts: 50, 55, 60, 65 inches model only
(UN50ES6500, UN50ES6580 I UN55ES6500, UN55ES6580 I UN60ES6500 I UN65ES6500)
@~
(M4XL10)
Follow the steps below to connect the TV to the stand. For more detailed instructions, see the separate
stand installation guide.
, .. "' . -- .. -------- .. ---- ....
~
0
~ ~ x4 (M4 XL 10)
Top View
~· ·
'
.
ATTENTION
-~ @@~\
: ~~~~~~ci
oc;;~~;S~SC
~eNg~ ~
"' ------- -- ... ---- - ----~ ..
E)
~ Place a soft cloth over a table to protect the TV, and then
place the TV on the cloth screen s1de down.
~ Insert the Stand Gu1de into the slot on the TV's bottom.
SideView
(Correct assembly)
(Incorrect assembly)
... ~ Sr-
0
,-- ~ N - ~-w-- - M M ·~ --- ---·---~ ~~ -- --- ~
'
'
1
~~
--- -- . . -.
x4 (M4 X L1 0)
~ NOTE
• Make sure to distinguish between the front and back of each component when assembling them.
• Make sure that at least two people lift and move the TV.
• Stand the product up before you tighten the screws. If you tighten the screws with the TV lying
down, it may lean to one side when you stand it up.
& Do not insert your fingers into the stand base slot of the TV when installing the stand base.
Installing the Wall Mount (Optional)
Wall or Ceiling Mounting
If you mount this product on a wall, it should be mounted only as recommended by the
manufacturer. Unless it is correctly mounted , the product may slide or fall , causing serious
injury to a child or adult, and serious damage to the product.
Installing the Wall Mount Kit
The wall mount kit (sold separately) lets you mount the TV on the wall.
For detailed information about installing the wall mount, see the instructions provided w ith the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket. We do not
advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury
to yourself or others if you elect to install the wall mount on your own.
To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).
VESA Wall Mount Kit Notes and Specifications
~
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
~ NOTE
• Standard dimensions for wall mount kits are shown in the table below.
• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly
are provided.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length or do not comply with the VESA
standard screw specifications. Screws that are too long may cause damage to the inside of the TV
set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall ,
leading to personal injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified
wall mount is used or the consumer fails to follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have two people mount the TV on a wall.
LED-TV
~
26
100 X 100
M4
32 - 40
200 X 200
M6
46-60
400 X 400
MS
4
Remove the screws in the mounting holes before you install the wall mount.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
Installing a Wall Mount from Another Manufacturer
To install a wall-mount from another manufactu rer, use the HolderRing.
Connecting the Power Cord and the Antenna or Cable Connection
VHF/UHF Antenna
Power Input
~
Plug the power cord into a wall outlet only after you have made all other connections.
~
If you are connecting your TV to a cable or satellite box using HDMI, Component, or Video
connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.
"$''2. Use caution when you move or swivel the TV if the antenna cable is tightly connected. You cou ld
break the antenna jack off the TV.
The EX-Link Cable Connection
The EX-LINK connection is for service only.
Connecting to AV Devices (Biu-ray Players, DVD Players, etc.)
Using an HDMI Cable for an HD connection (up to 1080p, HD digital signals)
For the best quality HD picture, we recommend using an HDMI connection.
Use with DVD players, Blu-ray players, HD cable boxes, and HD Set-Top-Box satellite receivers.
[]
1~
.·.· r . .
::Z["\Q.
t..=~-,_
I
Hl.)t...11Gz..t)IC !Not
~
~
SurJ~dec.J)
HDMIIN 1 (DVI), HDMIIN 2 (ARC), HDMIIN 3
• For the best picture and audio quality, connect digital devices to the TV using HDMI cables.
• An HDMI cable supports digital video and audio signals, and does not require an audio cable.
-
To connect the TV to a digital device that does not support HDMI output, use an HDMI to DVI
cable and audio cables.
• If you connect an external device to the TV that uses an older version of HOM I, the video and audio
may not work. If this occurs, ask the manufacturer of the device about the HOM I version and, if it is
out of date, request an upgrade.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
• We recommend using a basic high-speed HOM I cable or an HDMI cable that is Ethernet
compatible. Note that this product does not support the Ethernet function via HDMI.
• This product supports the 30 and ARC (Audio Return Channel) functions via an HDMI cable. Note
that the ARC function is supported by the HDMI IN 2 (ARC) port only.
• The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port on the TV. It can be
enabled only when the TV is connected with an audio receiver that supports the ARC function .
Using a Component Cable (up to 1 080p HD signals) or an AudioNideo Cable (480i analog signals only)
Use with DVD players, Blu-ray players, cable boxes, STB satellite receivers, VCRs.
I tt
r--I ~-~
Red Blue Green
.rh - ~0
,
!·._
!
1F1
"1
..
,,
____
•
iIi
\. Red \1\h te Yellow l
,,,........................... ...
, ...)
32 inches model only
~
For better pictu re quality, we recommend the Component connection over the A/V connection.
~
When you connect a Video cable to COMPONENT I AV IN , the color of the COMPONENT I AV IN
[VIDEO] jack (green) will not match the video cable (yellow).
Connecting to Audio Devices
Using an Optical (Digital) Cable Connection and a Standard Stereo Cable Connection
Use with Digital Audio Systems, Amplifiers, and Home Theaters.
······--··· · - - - - -'!
Red Wh1te
t. Q
I.
LJ
Red White
~
AUDIO OUT: Connects to the audio input jacks on your amplifieriDVD home theater.
• When connecting, use the appropriate connector.
• When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the TV and
adjust the volume level with the amplifier's volume control.
~
DIGITAL AUDIO OUT (OPTICAL)
• When you connect a Digital Aud io System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease
the volume of both the TV and the system.
• 5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.
• When the receiver (or home theater) is set to on, you can hear sound output from the TV's optical
jack. When the TV is receiving a DTV signal, the TV will send 5 .1 CH sound to the home theater
receiver. When the source is a digital component such as a DVD player I Blu-ray player I cable box
I STB (Set-Top-Box) satellite receiver and you connected it to the TV via HDMI , you will only hear
2 CH audio from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital
audio out jack from your DVD I Blu-ray player I cable box I STB satellite receiver directly to an
amplifier or home theater.
Connecting to a PC
Using an HDMI cable or an HDMI to DVI cable
~
Your PC may not support an HOMI connection.
~~
Use your PC speakers for audio.
HDI1..ll Csb!c
1Not Suppliod)
~ ~; ---
iNo1 Supp!ie<J:
32 inches model only
HDMI Cabl~
(Not SL_;ppliedJ
~l.----------
•N:JtSwppl e<li
The optimal resolution is 1920 X 1080 @ 60 Hz. See the Display Resolution page for all available
resolutions (page 43).
~ NOTE
• For an HDMI to DVI cable connection, you must use the HDMIIN 1 (DVI) jack.
• For PCs with OVI video out jacks, use an HOMI to OVI cable to connect the OVI out on the PC to
the HDMIIN 1 (DVI) jack on the TV. Use the PC's speakers for audio.
• PC (D-Sub) input is not supported.
Connecting to a Network
"
You can set up your TV so that it can access SMART TV applications through your local area network
(LAN) using a wired or wireless connection.
~
After you have "physically" connected your TV to your network, you must configure the network
connection to complete the process. You can configure the con nection during the Initial Setup
process (see page 23) or after the Initial Setu p process, th rough the TV's menu (see page 31).
Network Connection - Wireless
You can connect your TV to your local area network (LAN) through a standard wireless router or modem .
The LAN Port on the Wall
Wireless IP Router or
Modem that has a OHCP
Server
((<
LAN Cable (Not Supplied)
This TV supports the IEEE 802.11 a/b/g and n communication protocols. Samsung recommends using
IEEE 802 .11 n. If you play video using IEEE 802 .11a, b, or g, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point or AP (typically a wireless router or modem) to transmit an encrypted
security code called an access key.
Your TV is compatible with the following security protocols:
• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
• Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802. 11 n mode and the Encryption type is set to WEP or
TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance w ith new
Wi-Fi certification specifications.
Network Connection - Wired
There are three main ways to connect your 1V to your network using cable, depending on your network
setup. They are illustrated starting below:
The Modem Port on the Wall
External Modem
(ADSL I VDSL I Cable TV}
Modem Cable (Not Supplied)
The Modem Port on the Wall
LAN Cable (Not Supplied)
External Modem
(ADSL I VDSL I Cable TV}
Modem Cable
(Not Supplied)
TV Rear Panel
TV Rear Panel
IP Router that has a
DHCP Server
LAN Cable
(Not Supplied)
LAN Cable
(Not Supplied)
The LAN Port on the Wall
LAN Cable (Not Supplied)
~
The TV does not support network speeds less than or equal to 10Mbps.
~
Use Cat 6 (STP Type*) cable for the connection. (*Shielded Twisted Pair)
The Remote Control
Installing batteries (Battery size: AAA)
Match the polarity of the batteries to the symbols in the battery compartment.
~ NOTE
• Install the batteries so that the polarity of the batteries(+/ -) matches the illustration in the battery
compartment.
• Use the remote control within 23 feet of the 1V.
• Bright light may affect the performance of the remote control. Avoid using it near fluorescent lights
or neon signs.
• The color and shape of the remote may vary depending on the model.
The Remote Control Buttons
Learn where the function buttons are on your remote. Especially note SOURCE, MUTE, VOL, CH, MENU,
TOOLS, G. INFO, CH LIST, RETURN, and EXIT.
iZ£. This remote control has Braille points on the Power, Channel, and Volume buttons and can be used
by visually impaired persons.
Displays and selects the available video
sources. (page 27)
Turns the TV on and off.
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with th1s
button set to On will reduce the battery
usage time.)
Lets you control the Set-Top-Box (STB)
connected to the TV usng your remote.
After you connect the device to the
TV. the remote control can control the
navigation, number, and other keys
needed to operate and control the
dev1ce. (page 19)
Gives direct access to channels.
Press to select additional digital
channels being broadcast by the same
digital station. For example, to select
channel '54-3' , press '54' , then press
'-'and ·3'
Returns to the previous channel.
Cuts off the sound temporarily.
•
Changes channels.
+
VOL
Adjusts the volume.
Brings up the Smart Hub applications.
See e-Manual chapter Advanced
Features __, Smart Hub.
Displays channel lists on the screen.
Starts search function. See e-Manual
chapter Advanced Features __, Search.
Opens the OSD (Menu)
Quickly select frequently used functions.
Use this button in a specific feature. For
details, refer to thee-Manual.
(INFO)!FO
Moves the cursor, selects the on-screen
menu items, and changes the values
seen on the TV's menu.
Returns to the previous menu.
Use these buttons in a specific feature.
For details, refer to thee-Manual.
The color and shape of the remote
control may vary depending on
the model.
Displays information on the TV screen.
Exits the menu.
Use these buttons according to the
directions on the TV's screen.
~
II
~
SI\MSUNG
Family Story: Connect to the Family
Story appl1cat1on. See e-Manual chapter
Advanced Features __, Family Story.
MTS: Press to select a sound track
you want to listen from among the
ones be1ng broadcasted. See e-Manual
chapter Basic Features __, Adjusting
Sound Settings.
: Turns the 3D image on or off. See
e-Manual chapter Advanced Features __,
Using the 3D function.
SUPPORT: Lets you use various
support functions including the
e-Manual. (page 33)
P.SIZE: Lets you select the Picture
Size. See e-Manual chapter Bas1c
Feature __, Changing the Picture Size.
CC: Displays d1gital subtitles. See
e-Manual chapter Preference Features
..... Other Features.
Setting up Universal Remote with The Universal Remote Setup Application
~;z,
If your remote controller buttons does not work, please set your remote to TV mode by using the
DEVICE button.
1. To set up Universal Remote, press the SETUP button on your remote.
2. To identify your remote, press and hold the SETUP button for 8 seconds. If you use this function for
the first time, the END USER LICENSE AGREEMENT screen appears.
3. Press the G button to select AGREE. It is required to agree with the terms prior to using Universal
Remote.
4. Select a remote control you have. The remote option menu screen appears.
5. Select Add a device to control. The Select a device screen appears.
6. Select an external device you want to connect. The Input Source screen appears.
7. Select a port that the external device is connected to the TV. If your TV cannot find an external device,
please check your external device connection , and then try again by selecting Refresh.
8. To search a brand name, select Search brands/TV service providers. The QWERTY keypad screen
appears. Input a brand name using the QWERTY keypad screen. When done, select Done. Wait until
the search is completed and then select a brand name in the search result.
9. Select Search Model. The QWERTY keypad screen appears. Input a model number in the same
way as Step 8, and then select a model number you have in the search result list. If you can't find the
model, select Recommended model. The TV progresses a test using the code set of the brand you
selected . If you select Recommended model, go to Step 11 . If you select a model in the search result
list , go to Step 13.
10. The Test screen appears. Press and hold the SETUP button for 3 seconds. Numbers appears on the
screen.
11. Enter the following numbers using your remote. The button test screen appears.
12. Press the v CH A button to test your remote. If your external device working , select Yes, go to
the next step. to register the device. If you external device is not work, select No, try the test with a
different code set.. If you select No, try the test with a different code set., the TV changes the code
data, and then the Test screen reappears. Try again Steps 10 to 12.
~
If all the code data do not work, please check the brand name or search a model name of your
external device again.
13. Your external device has been setup successfully.
~
When you use the BD home theater by using Universal Remote, some buttons may not be supported.
In this case, we recommend to use Anynet+ (HDMI-CEC) function.
Setting up Universal Remote with Universal Remote Code Set
If your remote controller buttons does not work, please set your remote to 1V mode by using the DEVICE
button.
1. To set up Universal Remote, press the SETUP button on your remote for 3 seconds. All the LEOs on
the top of your remote blink twice simulaneously.
2. Press the 1 button on your remote to select a Set-top box.
3. Press the number button corresponding to the port of device connected.
~
Port numbers are as follows:
HDMI1/DVI
4. Enter Universal Remote Code corresponding to device you have.
~
For more detailed information about Universal Remote Code, refer to "Universal Remote Code Set list"
on page 21.
Using your remote as a Universal Remote
In Universal Remote mode, you can use your remote to control your 1V and STB together, your 1V alone,
or your STB alone. When you have set your remote to control your 1V and STB, certain buttons control the
1V only and certain buttons control the STB only.
• Controlling the TV and STB Together
To control your 1V and STB together, press the WATCH TV button at the top
center of your remote. The 1V and STB LEOs go on and off. If the 1V is on, it
automatically changes to the source the STB is connected to.
You can control the 1V and Set-Top box using the universal remote. (For
example, press the Volume button to adjust the 1V volume, press the
channel button to change the STB channels, etc.)
~
See the illustration to the right. When you are using the remote as a
universal remote, the buttons demarcated for TV control the TV only and
the buttons demarcated for STB control the set top box only.
~
To turn only the TV off, press the DEVICE button, change to TV mode,
and then press the C) button. To turn only the STB off, press the
DEVICE button, change to STB mode, and then press the C) button.
To turn the TV and the STB off, press the C) button and hold it for two
seconds.
• Controlling the TV only.
Press the DEVICE button and change to 1V mode. The 1V LED goes on and off. You can only control
the 1V using the universal remote.
• Controlling the STB only
Press the DEVICE button and change to STB mode. The STB LED goes on and off. You can only
control the Set-Top box using the universal remote.
To initializing (reset) the Universal Remote Control
Initializing erases the current code set from the remote control's memory.
1. Press the SETUP button for 3 seconds. All the TV and STB LEOs on the top of your remote blink twice
simultaneously.
2. Press in sequence: 9 , 8, 1.
3. The TV and STB LEOs on the top of your remote blink once simultaneously, and then the Universal
Remote Control initializes.
Universal Remote Code Set list
Setup Codes For Cable Set Top Box
Digeo
2187
0702
Samsung
0000, 0040, 0144, 0702, 0840. 1877, 2979.
3319
1376, 1877, 2187
2576
Toshiba
Verizon
1877
Setup Codes For Satellite Set Top Box
LG
Hughes Network
Systems
0335, 0461
1377, 1442
0796, 1255, 3321
0869
Configuring the Basic Settings in Initial Setup
" ,
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the TV's basic settings. Plug the power cord into a wall outlet, and then press the 0 button to
turn on the TV.
Setup is available only when the input source is set to TV. See "Chang1ng the Input Source" (page 27).
"l{;t,
To return to the previous step in the Setup sequence, select Previous.
~
If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna
or cable connection before you turn on the TV. See page I 0 for instructions.
<Z~
If you want to configure a wired network connection during Setup, make sure you've connected
a LAN cable to your TV. See pages 16 for instructions. If you want to configure a wireless network
connection during Setup, make sure your wireless modem or router is on and working.
After you press the 0 button, the Start screen appears. Select Next
to continue. The Menu Language screen appears. Select the menu
language you want using your remote, and then select Next. The TV will
display on-screen menus using the language you select beginning with
the next step in the Setup process.
On the Use Mode screen, select the Home Use using your remote, and
then select Next. The Network Settings screen appears.
"!~
Store Demo is for retail environments only. If you select Store
Demo, some functions will not work, and the TV will reset all
functions to their factory default every 30 minutes. For more
information about Store Demo, go to the end of this section.
To configuring your network settings, select Next using your remote, and
then go to 3A - Wireless Network or 38 - Wired Network on the next
page.
If you do not know your network configuration information or want to
configure the settings later, or do not have a network, select Skip, and
then go to 6 - Auto Program (I) on page 25.
To configure network settings later, refer to "Setting up the Wired or
Wireless Network" in the e-Manual or see the Network Connection
sections in this manual (pages 15 and 31 ).
1. The TV searches fo·r and then displays all the wireless networks
within range. When done, it displays a list of the networks. In the list
of networks, move the Highlight to select a network, and then select
Next. If the selected network requires a Security Key, the Security
Key screen appears.
~
If you have a WPS(PBC) compatible router, select WPS(PBC)
instead, and then follow the directions on the screen . When
done, go to Step 4.
2. Enter your network security key or WPS PIN using your remote.
~
Enter numbers and letters using your remote.
• You can enter numbers by pressing the number buttons on
the remote.
• To enter a letter, move the Highlight to the letter, and then
select it. You can enter numbers in the same fashion if you
choose.
~
To display capital letters (or redi splay small letters if capital letters
are displayed), select Caps or Shift.
~
To display symbols and punctuation, select *· To redisplay
letters, select * again.
3. When done, select Next if you have entered a security key or WPS
PIN if you have entered a WPS PIN.
4. The TV checks the wireless connection. If the connection is
successful, the You are connected to the Internet. If you have any
problems using online services, please contact your Internet
Service Provider. message appears. Select Next, and then go to 4
Software Upgrade Step.
~
If the connection fails, select Previous, repeat Step 1 and 2,
carefully re-enter your security key or WPS PIN, then repeat
Steps 3 and 4. If it fails again, select Next on the "Connection
Failed" screen, and then go to 6 - Auto Program (1) on the next
page. Configure your network later through Network Settings
in the TV's Menu. For more information, refer to "Setting up the
Wired or Wireless Network" in the e-Manual or see the Network
Connection sections in th is manual (pages 15 and 31).
The TV checks the network connection, then displays the You are
connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider. message
appears. Select Next. The Software Upgrade screen appears.
Software Upgrade:
Update the software
to the latest version
~
To update later,
select Skip.
Auto Pr<>gram (1):
Select where your
TV signal.comes
from.
When Network Settings is complete, your 1V will check for a new
software version automatically. If new software is available, the 1V
downloads and installs the new software. When the download is
complete, select Next.
~
If you want to upgrade later, select Skip. For more information, refer
to Software Update (Preference Features ~ Support Menu) in the
e-Manual.
~
This may take some time, depending on your network status.
~
You can only upgrade software if your TV has an active network
connection.
~
If no new update software is available, a no new updates message
appears on the screen . Select OK.
Select the appropriate option for your 1V using your remote, and then
select Next.
• Yes, I need to.: Select if you have an antenna or a cable connection
without a set-top box. If you select this option , go to 6- Auto
Program (2) Step.
•
AutoProgram (2):
·Select the search
No, I don't need to.: Select if you have a satellite or cable set-top
box. You do not need to run Auto Program. If you select this option,
go to 8 - Clock on the next page.
1. Select Air or Cable using your remote. A check appears on your
selection. When done, select Next. You can check both if you have
both connected.
2. If you selected Air, go to 7- Auto Program (3) .
3. If you selected Cable, you'll go to the cable system screen. Select
Digital Cable System. The option window appears. Select the
correct cable signal format ; STD, HRC, or IRC. Most cable systems
use STD (Standard). Repeat the same process with Analog Cable
System.
4. When done, select Next.
Auto Program (3):
Channel
Channel memorization stars. Channel memorization can take up to 45
minutes, depending on your cable system.
For more information , refer to Auto Program (Channel Menu ---+
Memorizing Channels) in thee-Manual.
~
Select Stop at any time to halt the memorization process.
Select Auto or Manual , and then select Next.
~
If you selected No, I don't need to. in 5- Auto Program (1}, you can
only set the current time and date manually, using your remote.
Auto
If you selected Auto, the TV w ill automatically download the correct time
from a digital channel. The Time Zone screen will appear. Select your
Time Zone , and then select Next. The DST (Daylight Savings Time)
screen will appear. The DST function sets the time ahead one hour to
adjust the clock for Daylight Savings Time. Select On if you want to turn
the DST adjustment on. Select Off to turn off the DST adjustment. You
can also turn the DST function on through the TV's on screen menu
(Menu ____. System ____.Time ____. Clock ____. DST).
Manual
If you selected Manual, you'll go to the Clock screen . Select Date or
Time. You can set the current date and time using your remote. When
done setting the Date and Time, select Next.
Review the Setup data, and then select Close to finish.
~
The completed settings are displayed.
If You Want to Rerun Setup ...
Menu
--->
System ____. Setup
If You Want to Turn the Store Demo Mode On or Off.
To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to MENU (ITIJ)) and hold for more
than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using
the Controller, push the Controller to the right (to Source (-EJ)) and hold for more than 5 seconds. See
page 29 for information about the Controller.
Changing the Input Source
Source
e----+ Source
When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch
to your cable box or STB satellite receiver, you need to change the Source.
•
TV I HDM11/DVI I HDMI2 1 HDM131 AV I Component
1. Press thee button on your remote. The Smart Hub screen appears.
2. Select Source. The Source screen appears.
3. Select a desired external input source.
~
Alternatively, you can access the Source screen by pressing the SOURCE-El button on your remote.
~St.
You can only choose external devices that are connected to the TV. In the displayed Source list,
connected inputs are highlighted.
How to Use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, press the
TOOLS~ button on your remote when the Source list is displayed. The following selections appear under
Edit Name:
•
VCR I DVD I Cable STB I Satellite STB I PVR STB I AV Receiver I Game I Camcorder I PC I DVI
PC I DVI Devices I TV I IPTV I Blu-ray I HD DVD I DMA: Select an input jack, and then select the
name of the device connected to that jack from the list that appears. For example, if you have your Bluray player attached to HOM I IN 2 (ARC), select Blu-ray for that input.
~
If you connect a PC to the HOM I IN 1 (DVI) port with an HDMI cable, assign PC to HDMI1/DVI in
Edit Name.
~
If you connect a PC to the HDMIIN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to
HDM11/DVI in Edit Name.
~
If you con nect an AV device to the HOM I IN 1 (DVI) port w ith an HDMI to DVI cable, assign DVI
Devices to HDMI1/DVI in Edit Name.
Information
You can see detailed information about the selected external device.
Refresh
If the external devices are not displayed in the Source list, open the Tools menu, select Refresh, and then
search for the connected devices.
~
Alternatively, you can refresh the Source list by pressing the r.:J button on your remote.
How to Navigate Menus
Your 1V's Main and Tools menus contains functions that let you control the 1V's features. For example, in
the Main menu you can change the size and configuration of the picture, its brightness , its contrast and so
on. There are also functions that let you control the 1V's sound, channel configuration, energy use, and a
host of other features. To access the main, on-screen menu, press the MENU[ll] button on your remote.
To access Tools menus, press the TOOLS,Ll button. Tools menus are available when the TOOLS,Ll menu
Icon is displayed on the bottom right of the screen
The illustration below displays the buttons on the remote you use to navigate the menus and select and
adjust different functions.
0
MENUITIJ button: Displays the main on-screen menu.
f) TOOLS,Ll button: Displays the Tools menus when available.
8
G and Direction buttons: Use the Direction buttons to move the cursor and highight an item. Use the
Enter button to select an item or confirm the setting.
8
0
RETURN':) button: Returns to the previous menu.
EXIT +ll button: Exits the on-screen menu.
How to Operate the Main Menu (OSD - On Screen Display) Using the Remote
The access steps may differ depending on the menu option you select.
The main menu options appear on the screen:
Picture, Sound , Channel, Network, System , Support.
,,,.,,.,,,.,,,,,, . . Select a main menu option on the left side of the screen with the • or •
button.
,g,,;;:·::o iLi!W','i:::
i! ijl!l!ltf;l!!l!!ilJ;!~'
Press G to access the sub-menus.
Select the desired submenu with the • or •
button .
.,.,. , ·'""''' Adjust the value of an item with the ~.~. • . or • button. The
adjustment in the OSD may differ depending on the selected menu.
Press G to confirm the selection.
Press EXIT +[J .
Using the TV•s Controller (Panel Key)
The 1V' s Controller, a small joy stick like button on the rear right side of the 1V, lets you control the 1V
without the remote control.
~'£.
The product color and shape may vary depending on the m odel.
Function menu
~:A
Follow these instructions facing the front of your TV.
~-
When selecting the function by moving the 1V Controller to the up/down/ left/ right directions, be sure
not to press the 1V Controller. If you press it first. you cannot operate it to move the up/down/ left/right
directions.
Turn the 1V on by pressing the 1V Controller when the 1V is in
standby mode.
Adjust the volume by moving the 1V Controller from side to side when
the power is on.
Select a channel by moving the 1V Controller upwards and
downwards when the power is on.
To view and use the Function menu, press and release the 1V
Controller when the power is on. To close the Function menu, press
and release the 1V Controller again.
With the Function menu visible, select SMART HUB (8) by moving
the 1V Controller upwards. The SMART HUB main sc reen appears.
Select an application by moving the 1V Controller, and then pressing
the 1V Controller.
With the Function menu visible, select the MENU ([[]) by moving the
1V Controller to the left. The OSD (On Screen Display) Menu appears.
Select an option by moving the 1V Controller to the right. Move the
1V Controller to the right or left, or upwards and downwards to make
additional selections. To change a parameter, select it, and then press
the 1V Controller.
With the Function menu visible, open the Source (-EJ) list by moving
the 1V Controller to the right . The Source list screen appears. To
select a source, move the 1V Controller upwards and downwards.
When the source you want is highlighted, press the 1V Contro ller.
With the Function menu visible, select Power Off (C)) by moving the
1V Controller downwards, and then press the 1V Controller.
~
To close the Menu, Smart Hub, or Source, press the 1V Controller for more than 1 second.
Standby mode
Your 1V enters Standby mode when you turn it off and continues to consume a small amount of electric
power. To be safe and to decrease power consumption, do not leave your 1V in standby mode for long
periods of time (when you are away on vacation , for example). It is best to unplug the power cord.
Using Smart Hub
Smart Hub provides easy, on-screen access to five functions that let you manage and access channels,
set favorite channels, access photos, videos, or music on USB devices, cameras, and PCs, select video
sources, and set the 1V to turn on automatically when a show you want to watch is on. The five functions
are listed below:
• Channel : Lets you manage channels, select favorite channels, add channels to and delete channels
from the Added Ch. list (the channels that appear when you press the v CH /\. button.)
• Web Browser: Lets you browse the Internet.
• Schedule Manager: Lets you schedule shows and channels for viewing.
• Source: Lets you select a connected external video source to view.
• AIIShare Play: Lets you access, view, or play photos, videos, or music located on USB devices,
digital cameras, cell phones, and PCs. PCs and cell phones can be accessed wirelessly, through your
wireless network.
Smart Hub also provides an easy-to-use gateway to a host of on-line media and entertainment including
apps from the Samsung Apps store, streaming videos and movies, kids sites, and more.
~ To access Smart Hub, press the
~
t:3 button on your remote.
For more information about Smart Hub, see thee- Manual.
Configuring Network Connections
After you have run the initial setup, you can configure or reconfigure the network connections through the
TV's menu.
Configuring a Wireless Network Connection
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to
configure network connections automatically. Most wireless networks use DHCP. If you have a Static IP
network, see the e-Manual for configuration instructions.
To configure the network connection for a network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in the illustration on page 15.
2. Turn on your TV, and then go to the Network Settings screen. (Menu Settings)
Network --> Network
3. Select Start. The Network function searches for available wireless networks. When done, it displays a
list of the available networks.
4. In the list of networks, move the highlight to select a network, and then select Next.
~
If you have a WPS(PBC) compatible router, select WPS(PBC) instead, and then follow the
directions on the screen.
5. Enter your network security key or WPS PIN using your remote.
~
Enter numbers and letters using your remote.
• Enter numbers by pressing the number buttons on your remote.
• To enter a letter, move the Highlight to the letter, and then select it. You can enter numbers in
the same fashion if you choose.
~
To display capital letters (or redisplay small letters if capital letters are displayed), select Caps or
Shift.
~
To display symbols and punctuation, select * · To redisplay letters, select *
again.
6. When done, select Next if you have entered a security key or WPS PIN if you have entered a WPS PIN.
7. The TV checks the wireless connection. If the connection is successful, the "You are connected to the
Internet. If you have any problems using online services, please contact your Internet Service
Provider." message appears. Select Next using your remote.
~
For more detailed information, see "Setting up the Wireless Network" in thee-Manual.
~
If you want to configure the connection manually, select IP Settings on the Network Connection
screen. Set IP Setting to Enter manually, and then enter the IP Address, Subnet Mask,
Gateway, and DNS Server manually.
Configuring a Wired Network Connection
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network
connections. Home networks that support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS values your 1V needs to access the Internet so you don't have to enter them manually.
If you have a Static IP network, see your user's manual for configuration instructions.
To configure the network connection for a wired network that uses DHCP, follow these steps:
1. Connect your 1V to your network as shown in one of the illustrations on page 16.
2. Turn on your 1V, and then go to the Network Settings screen . (Menu-> Network-> Network
Settings)
3. Select Start.
4. The Network Connection screen appears, and verifies the network connection. When the connection
has been verified, the "You are connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider." message appears. Network set up is
completed.
~
If your TV cannot acquire network the connection values automatically or if you want to set the
connection manually, select IP Settings on the network connection screen . Set IP Setting to Enter
manually, and then enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.
~
For more detailed information, refer to "Setting up the Wired Network" in thee-Manual.
How to view the e-Manual
You can find instructions for your 1V's features in thee-Manual. To open thee-Manual,
press the SUPPORT button on your remote.
You can also access it through the menu:
Menu ---> Support ---> e-Manual
Access thee-Manual
To use thee-Manual, follow these steps:
1. When you need to help, press the SUPPORT button on your remote. The Support screen appears.
2. Select e-Manual using your remote. The e-Manual screen appears.
3. Select a desired category.
4. Select a desired topic. The e-Manual displays the page you want to see.
~
Blue words in e-Manual signify menu options or selections on TV screen.
~
Green icons in thee-Manual signify a button on your remote.
~
Arrow steps (e.g. Menu ---> Support ---> e-Manual) in thee-Manual signify the sequence of steps
required to access an option or activate a function .
How to toggle between an e-Manual topic and the corresponding OSD menu(s).
~
This function is not enabled in some menus.
~
You can't use the Try Now function if the menu is not available.
1. To go to the topic's corresponding menu option, press the rJ button on your remote.
2. To return to thee-Manual screen, press the SUPPORT button on your remote.
Using the colored and function buttons with the e-Manual
• Scroll bar: Scroll the e-Manual screen up or down.
•
~
I ., : Moves to the previous or next chapter.
• a Try Now: Move to the OSD menu that corresponds to the topic. To return to thee-Manual screen,
press the SUPPORT button on your remote.
•
l3 Home: Moves to thee-Manual home screen.
•
(!) Position: Each time you select (!) , you change the position of thee-Manual screen.
•
[!] Index: Displays the Index screen.
•
'J Return: Return to the previous screen.
How to search for a topic on the index page
1. Select l!l using your remote. The Index screen appears.
2. To search for a topic, select a letter. The Index displays a list of topics and keywords that begin w ith the
letter you selected.
3. Select a topic or keyword you want.
4. Thee-Manual page with the topic appears.
~
To close the Index screen, press the RETURN'J button.
To Change the screen position of the e-Manual
If thee-Manual screen is not invisible well because the OSD Menus screen, you can change thee-Manual
screen 's position .
1. Move the Highlight to thee-Manual screen by pressing the SUPPORT button on your remote .
2. Press the (!) button on your remote. Each time you select (!) ,the position of thee-Manual will change.
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solution. Also review the
Troubleshooting Section in thee-Manual . If none of the troubleshooting tips apply, visit www.samsung.
com/support or call Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).
Flickering and Dimming
Component Connections I
Screen Color
If your Samsung Television is flickering or dimming sporadically, you may
need to disable some of its energy efficient features such as the Eco
Sensor or the Energy Saving feature. Follow the steps below with your
remote to turn these features off or on.
•
Energy Saving: User Menu--+ System--+ Eco Solution--+ Energy
Saving
•
Eco Sensor: User Menu --+ System --+ Eco Solution --+ Eco Sensor
If you find that the color on your Samsung television's screen is not
correct or black and white, first run a Self Diagnosis on the TV to make
sure there are no device issues.
• Self Diagnosis: User Menu --+ Support --+ Self Diagnosis
Picture Test
--+
If the problem does not appear in the Picture test, make sure:
• Your connections are all consistent. For example, if you've used the
AV In jack on your TV, make sure you have used the AV Out jack on
your video source.
• You have connected your devices to the correct jacks. For example, if
you use the Component jacks, labeled Pb, Pr, and Y, to connect your
TV and video source, make sure you have connected the blue Pb jack
on the video source to the blue Pb jack on the TV, and the yellow Y
jack on the source to the yellow Y jack on the TV.
Screen Brightness
If you find that the colors on your Samsung TV are correct but just a little
too dark or bright, try adjusting the following settings in the Picture menu
option of the Main menu:
•
Blur
Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and
so on.
If you find that there is a blur or "ghostlike" appearance to the images on
your television's screen, you might be able to correct the blurring using
Auto Motion Plus.
• Auto Motion Plus: User Menu --+ Picture --+ Picture Options
Auto Motion Plus
--+
Unwanted Powering Off
If your Samsung 1V appears to turn off by itself, there may be an issue
with either your Timer settings or your Eco friendly No Signal Power Off
feature.
First make sure Sleep Timer is not accidentally set. The Sleep Timer
turns off the 1V automatically after a certain period of time has passed.
• Sleep Timer: User Menu ---. System ---. Time ---. Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal
Power Off or Auto Power Off feature.
• No Signal Power Off : User Menu ---. System --. Eco Solution ---.
No Signal Power Off
• Auto Power Off: User Menu ---. System ---. Eco Solution ---. Auto
Power Off
Trouble Powering On
Before you turn the TV on, find the red light on the right or left
bottom of your TV. Press the Power on button on the TV or remote.
The light should blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung
television, there are a number of things to check before making a call to
the service department.
If you're sure your power cord, remote control, and PC are functioning
properly, you may be having a cable issue. If you have a cable or satellite
box, your 1V may appear to be off because the cable or satellite box is
not outputting a signal. To test the signal output of your cable or satellite
box, press the guide or info button on the cable or satellite box remote
control. If the screen displays the guide or info data, the problem is
caused by the box.
Stand Assembly
If you have any trouble assembling the stand first, review "Install the
Stand" in the paper manual .
Cannot Find a Channel
Re-run Setup (Go to User Menu ---. System ---. Setup) or run Auto
Program . (Go to User Menu ---> Channel---. Auto Program).
~
For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/
spsn.
The TV won't turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet
and the TV.
• Make sure the wall outlet is working.
• Try pressing the 6 button on the TV to make sure the problem is not
the remote. If the TV turns on, refer to "Remote control does not work"
below.
There is no picture/video.
• Check the cable connections. Remove and reconnect all cables
connected to the TV and external devices.
• Set the video outputs of your external devices (Cable/Sat Box, DVD,
Blu-ray etc) to match the TV's input connections. For example, if an
external device's output is HDMI, it should be connected to an HDMI
input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the correct input source
• Reboot the connected device by unplugging it, and then reconnecting
the device's power cable.
The remote control does not
work.
• Replace the remote control batteries. Make sure the batteries are
installed with their poles(+/-) in the correct direction.
• Clean the sensor's transmission window on the remote.
• Try pointing the remote directly at the TV from 5-6 feet away.
The cable/set top box remote
control doesn't turn the TV on
or off, or adjust the volume.
• Program the Cable/Set remote control to operate the TV. Refer to the
Cable/ Set-Top-Box user manual for the SAMSUNG TV code.
~
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to
produce. There may be, however, a few bright or dark pixels on the screen. These pixels will have no
impact on the performance of the product.
~
To keep you r TV in optimum condition, upgrade to the latest firmware on the Samsung web site by
USB (samsung.com----. Support----. Downloads).
Licenses
[I] DOLBY
DIGITAL PLUS
PULSE
I
I
~db
2.0+Digital Out
DIVX .
HD
srs@
TheaterSound HD
Storage and Maintenance
.
~
If a sticker was attached to the TV screen, some debris can remain after you remove the sticker.
Please clean the debris off before watching TV.
~
The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior
and screen carefully using a soft cloth to prevent scratches.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing
on the TV may cause the TV to fall. In
particular, ensure your children do not
hang over or destabilize the TV. Doing
so may cause the TV to tip over, causing
serious injuries or death. Follow all safety
precautions provided in the Safety Flyer
included with your TV. For added stability
and safety, you can purchase and install
the anti-fall device as described below.
The TV-Holder Kit (Sold Separately):
The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw
and molly, or other screw appropriate for the wall or cabinet you intend to secure the TV-Holder string to.
We recommend a size M4xl 20 wood screw.
f-~~1
·'-"/
Installing the TV-Holder
1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the
screw included in the TV-Holder Kit that is designated for your TV.
~
Make sure to use only the appropriate supplied screw . If you use a different screw, you can
damage you r TV.
2. Firmly fasten the screw you provided (size M4xl20 or similar) to the wall or cabinet where the TV is to
be installed .
~
If you fasten the screw to the wall, we recommend you drive the screw into a stud . If that is not
possible, use a molly to anchor the screw.
3. Tie the 1V-Holder cord to the screw fastened to the wall or cabinet so that the 1V is fixed. See the
illustrations below.
~
Install the TV close to the wall so that it does not fall.
~
When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted
downwards for safety purposes.
~
Check the cord occasionally to make sure it is secure.
~
Before moving the TV, separate the connected cord first.
4. Verify all connections are properly secured . Periodically check the connections for any sign of fatigue or
failure. If you have any doubt about the security of your connections, contact a professional installer.
To purchase the TV-Holder Kit, contact Samsung Customer Care
• In the United States: 1-800-SAMSUNG (1-800-726-7864)
• In Canada: 1-800-SAMSUNG (1-800-726-7864)
.
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50F to 104 F (10'C to 40'CJ
10°'o tO 80°!o . nOn-COndensing
-4"F to 11 3"F (·20' C to 45°C)
(40.CT measured di
Sound
(Output)
Dimensions 0N x H x D)
Body
With stand
Weight
Without Stand
With Stand
10W X2
29.2 x 17.7 x 1.8 1nches
(743 2 x 449.7 x 48 1 mn11
29.2 x 20.3 x 9.5 inches
(743.2 x 516.6 x 241.3 mm)
36.6 x 21.8 x 1.8 inches
(930.4 x 555. 1 x 48.1 mm)
36.6 x 24.4 x 9.5 inches
(930.4 x 620.9 x 241.3 mm)
14.7 lbs 16 7 kg)
17.4 lbs (7.9 kg)
23.3 tbs (10 6 kg)
26.2 lbs (11 .9 kg)
145.9. measured diagonally)
(49.5" measured diagonally)
Sound
(Output)
Dimensions 0N x H x D)
Body
With stand
Weight
Without Stand
With Stand
Screen Size
(Diagonal)
10 WX 2
41.9 x 24.8 x 1.8 inches
(1065 8 X 631.5 X 48 1 mmj
41.9 x 28.3 x 10.8 inches
(1065.8 x 721 .2 x 276.7 mmi
44.9 x 26.5 x 1.8 inches
(1142.6 x 674.3 x 48. 1 mm)
44 .9 x 29.3 x 10.8 inches
(1142.6 X 745.4 X 276.7
29. 1 lbs (13.2 kg)
33.0 lbs 115.0 kg)
33.71bs (15.3 kg;
37 9 1bs (172 kg)
55" Class
(54.6. rneasured diagonally)
60' Class
:60.0" measured diagonally)
Sound
(Output)
Dimensions 0N x H x D)
Body
With stand
Without Stand
With Stand
Screen Size
(Diagonal)
10WX 2
49.4 x 29.0 x 1.8 1nches
I1256.4 x 738.3 x 48.1 mm)
49.4 x 31.7 x 10.8 inches
(1256.4 X 806.4 X 276.7 mm)
54. 1 x 31.7 x 1.9 inches
11376.5 x 805.8 x 48.6 mm)
54 .1 x 34.5 x 12 1 1nches
(1376.5 x 877 .1 x 309.8 mm)
35.4 lbs 116.1 kg)
39.4 lbs (17.9 kg)
46.2 lbs (2 1 0 kgi
51.81bs (23.5 kg)
65.Ciass
(64 S measured
10 WX 2
Dimensions 0N x H x D)
Body
With stand
Weight
Without Stand
With Stand
ly)
58.5 x 34.3 x 1.9 1nches
(1487 3 x 872.4 x 49 0 mm)
58.5 x 37 A x 13.8 1nches
(1487.3 x 950.7 x 351.6 mm)
52.6 1bs 123 9 kg)
59.7 lbs 127 1 kQi
(40 0 measured diagonally)
Sound
(Output)
(45.H measured d1agonally)
10WX 2
Dimensions I:N x H x D)
Body
With stand
42.' x 25.0 x 1.8 Inches
36.8 x 22 0 x 1.8 inches
(936 0 x 559.8 x 46.9 mm)
11070. 2 x 635.6 x 46.9mrn)
42.1 x 27.6 x 10.8 inches
36.8 x 24.5 x 9.5 1nches
(936.0 x 623.5 x 241.3 mm)
(1070.2 x 702.0 x 276.7 mm)
Weight
Without Stand
(54.6' measured diagonally)
10WX 2
Weight
Without Stand
With Stand
~~"
45. 1 x 26.7 x 1.8 inches
(11 46.9 x 678.3 x 46.9 mm)
49.6 x 29 .2 x 1.8 inches
(1260.8 x 742.4 x 46.9 mm)
45.1 x 29.4 x 10.8 1nches
1146.9 x 747.0 x 276.7 mm)
49.6 x 31 .9 x 10.8 inches
(1260 8 x 811.1 x 276.7 mm)
341 lbs (15 5 kg)
36.5 lbs (16.6 kg)
40.7 ltJs (18.5
38.3 1bs (17.4 kg)
Design and specifications are subject to change without prior notice.
The actual appearance of the TV may differ from the images in this manual, depending on the model.
·:!,ito This device is a Class B digital apparatus.
~'2:.
For information about the power supply, and more about power consumption, refer to the label
attached to th e product
'Rt.
Typical power consumption is measured according to Energy Star Program req uirements for
Televisions.
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/ recyclingdirect or call, (877) 278 - 0799
Display Resolution
If you have attached the 1V to your PC, you can select one of the standard resolutions listed in the
Resolution column. The 1V will automatically adjust to the resolution you choose.
Mode.
~~-
. Resolution
Ho.ri:~:ontal Freg.~ency
(KHz)
Ve.r:tlcal F~~ncy
(iiZC iT ' :"'' "\''
: .Smc
Pi~~~ Clockfreq®Ocy
P~latlty .
.;:~ ~:· ;;;,:h~---- ;~ {!~:~;-· ·;-·
(~Hzi ·
. "· .. •(H/V) ,
·' :: ·
:' ·· '
<
'
IBM
640 X 350
720 X 400
3 1469
31469
70086
70.087
25.175
28.322
+1-I+
MAC
640 X 480
B32 X 624
1152 X 870
35.000
49.726
66.667
74.551
75.062
30.240
57.2B4
100.000
·I ·
-i -I-
59 940
72.809
75.000
60.317
72.188
75.000
60.004
70069
75029
251 75
31.500
31.500
40.000
50.000
49.500
65.000
75000
78.750
-1-i -1-
VESA DMT
640 X 480
640 X 480
640 X 480
BOO X 600
800 X 600
BOO X 600
1024 X 768
1024 X 768
1024 X 768
1152 X 864
12B0 X 720
1280 X 800
1280 X 1024
1280 X 1024
1366 X 768
1440 X 900
1600 X 900RB
1680 X 1050
1920 X 1080
75.000
60.000
59.810
108.000
74.250
6B.6B1
31469
37.861
37.500
37.879
48.077
46.B75
48.363
56476
60.023
67.500
45.000
49.702
63.981
79 976
47.712
60020
75 025
59.790
55.935
60.000
65.290
67.500
59.887
60.000
59.954
60.000
NOTE
• The interlaced mode is not supported.
• The set might operate abnormally if you select a non-standard video format.
B3.500
108.000
135000
85.500
106.500
108.000
146.250
14B.500
+i +
-1+
+I+
-/ -
-1-I+
+I+
+I +
-I+
~I+
+I +
+I+
-I+
+/+
-I+
+/ +
Video Codec
~~
n::m:
·.avi
·.mkv
DIVX 3.11 /4.x/5.xi6.x
• asf
MPEG4 SP/ASP
' .wnw
·.mp4
H.264 BP/ MP/HP
'.3gp
·.vro
• mpg
·.mpeg
· .ts
'.tp
· .trp
·.mov
' .flv
.AVI
MKV
Mot1on JPEG
ASF
MP4
W1ndow Med1a Video v9
3GP
VRO
MPEG2
VOB
PS
TS
MPEG1
'.vob
·.svi
·.m2ts
·.mts
·.divx
'.webm
1920
X
1080
30
640 X 480
1920
X
1080
6 - 30
8
AC3
LPCM
ADMPCMIIMA
MSI
AAC
30
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
G.71 1(A-Law.
~-Law)
WebM
VP6
640 X 480
VP8
1920 X 1080
4
6. 30
8
Vorb1s
Other Restriction
'!(~
Video content will not play, or not play correctly, if there is an error in the content or the container.
'lf~
Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible
Frame/sec listed in the table above.
~~
If the Index Table is damaged, th e Seek (Jump) function is not supported.
~~
When you play video over a network connection, the video may not be played smoothly.
·~;,.
The menu may take longer to appear if the video's bit rate exceeds 10Mbps.
~';<.
Some USB/digital camera devices may not be compatible w ith the player.
Video decoder
• Supports up to H.264, Level 4.1.
• H.264 FMO I ASO I RS, VC 1 SP I MP I AP L4 are not supported.
• For all Video codecs except VP8, VP6
-
Below 1280 x 720: 60 frame max
-
Above 1280 x 720: 30 frame max
• GMC is not supported.
• Supports only SVAF Top/Bottom and Side by Side.
Audio decoder
• WMA 9, 10 Pro supports up to 5.1 channel and M2 profile (except LBR mode of MO).
• WMA lossless audio is not supported.
• If Vorbis is only in Webm container, supports up to 2 channel.
Dimensions
•
Jack panel detail I Rear view
I
Elill!l
~:[-=a
-"'
@
<31
"i0•••.
(Un1t inches)
L{/
!
!
~T~
L-- @r---- - -
Ill
lii;
0
(Unit 1nches)
UN40ES6500
7.8
7.8
14.3
51
UN46ES6500
15.7
15.7
12.7
3.8
UN55ES6500
15.7
15.7
16.8
7.5
UN60ES6500
15.7
15.7
19.2
8.7
UN40ES6580
7. 8
78
14.4
5.2
UN46ES6580
15.7
15.7
13.1
3.9
UN50ES6580
15.7
15.7
14.7
5.6
UN55ES6580
15.7
15.7
16.9
7.5
c~~)6
i
i
I
~
('
r
[§
I
'I
(Unit: inches)
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior
notice. Refer to the dimensions prior to performing installation of your 1V. Not responsible for typographical
or printed errors.
© 2012 Samsung Electronics America, Inc
Contact SAMSUNG WORLDWIDE
If you have any questions or comments about Your Samsung TV, please contact the SAMSUNG customer care center.
U.S.A
1-800-SAMSUNG (726-7864)
www.samsung.com
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
Electronics America, Inc. 85 Challenger Road
Park, NJ 07660
1111111111111111111111111111111111111111111
BN68-04192A-03
~~~
Assemble Stand before removing TV from shipping box
Scan this with your SMART Phone for How-to Video
Visit us samsung.com/SPSN for more Video guides
~
0 Components
Installing the TV Stand
@
When installing the stand, use the provided components and parts.
(I)
1 EA
1 EA
~
~
@
x8(M4XL12)
·-···--·- · - - - - - - - - - - - - - - - - -·- - - - - -·- - - - - - - - - - - - -
•
Stand (depending on the model)
Guide Stand
Screws
- - - - --------------- · - - - - - -- - - - - - --- - - - - -Top View
~~x4··
(M4XL12)
Ill
~-):--
=<cY'
:·- - ---- ---
.'"~; : ~
•
~-®
- --- AT@
·T,NitON~-.
/r;/
.
'
:
'
I
place the TV on the cloth screen side down.
CHEMICALS
I
I
GREASE
OIL
~
(Incorrect assembly)
t--•4
(M4XL12)
Function menu
TV Controller
Caution
Make sure to distinguish between the front and
> Make sure that at least two persons lift and move the TV.
};>
and then
Insert the Stand Guide into the slot of TV bottom side.
(Correct assembly)
Side View
'
I
I
I
I
\
DO NOT USE DO NOT USE DO NOT USE
·.
'
I
1
:
~·
~
:
~~~--------:
___ __ __
~ Place a soft cloth over the table to protect the TV,
',
0
-
BN68-04186A-02
II
1111 1111 II 1111111111111111111 111111111111
BN68-04186A-02
30 Active Glasses
SSG-4100GB
l l:
User's Guide
+ Replacing the Batteries
If the red LED bltnks every two seconds conttnually, replace the battenes wtth
new ones
~-~-~-00-~-~
Press down the
edge of the flap
Features
The SSG-41 00 GB 30 glasses enable you to view 30 images. The Samsung 30
glasses communicate with Samsung 30 1Vs via the 2.4GHz RF band.
<\>, The Samsung 30 glasses can be used only with for all2011 and 2012 Samsung
FULL HD(3i
FULL HD(3i
301'11RJ 301'
D,E andES series 30 1V, or a 30 1V product with the GLASSES
or GLASSES
logo on it, and can 't be used with any other wireless communication
products.
<\>, The "Full HD 30 Glasses™" Logo signifies compatibility between display
products and 30 Glasses that are compliant with the "Full HD 30
Glasses1M" format and does not indicate the picture quality of the 30
images visible using the glasses, which depends on the quality of the
display products.
Parts
Components
3D Active glasses
(Frame body, Temples)
LED Indicator
~===:::::::::::::::::--~& Power Button
Button Battery
(CR2025)
Push out the
flap
Swing the flap
open
Replace the
battery wrrh a
new one
Put the flap
back on
Push the flap
down unitl rr
clicks
""" Please insert the battery in the same direction as indicated.
+ Viewing guidelines
• When viewing a 30 video under a fluorescent lamp (50 Hz - 60 Hz)
or 3-wavelength lamp, you may notice a small amount of screen
flickering.
If this occurs, dim or turn off the light.
• Switching the input mode while watching a 3D movie may disable the
30 function on the 1V. As a result, the 30 glasses may not function
and the movie may not be displayed properly.
• If the 30 glasses are moved outside of their working distance, the
signal from the 1V will disconnect and the glasses' 30 function will
turn off after several seconds. The 3D glasses will power off 30
seconds after the 30 function turns off. When this happens, the red
LED will turn on for 3 seconds.
Under some circumstances, the 30 glasses may malfunction due to
interference from other devices.
• Ensure you are within the working distance of the glasses when you
view a 30 video.
The images may not be viewable in 30 if you move outside of the
working aistance for 3 seconds.
• If you lie on your side while watching 1V with 30 active glasses, the
picture may appear dark or may not be visible.
• The 30 glasses may not work properly due to interference from
other 30 products or electronic devices that operate on the 2.4GHz
frequency such as a microwave oven or Internet AP. If he 30 function
malfunctions due to interference, please move all other electronic or
wireless communication devices as far away from the glasses and the
1V as possible.
• The 3D effect may be experienced differently depending on the
viewer. You may not notice the 30 effect at all if you wear glasses and
have an unusual prescription.
• If a part of the 30 glasses or lenses is defective or damaged, it
cannot be repaired and the glasses should be replaced. If the glasses
stop working within the warranty period, the glasses can be repaired
or replaced for free. If the glasses have been damaged due to the
fault of the customer or the warranty period has expired, a new pair
of glasses will have to be purchased.
*
*
*
Liquid crystal shutter
* For information on how to attach the temples and pairing method of the
glasses, refer to page 11.
Pairing 30 Active Glasses
<\>, What is Pairing? Pairing is a process of connecting 30 glasses and a 30
1V so that the two devices can exchange data.
<\>, Ensure your Samsung 1V and 30 glasses are no farther than 19.5 in (50
em) apart from each another while pairing is in progress.
+
Operating range
Recommended pairing distance
+
+
+
Turning the glasses on
Press the power button briefly.
The green LED is turned on for 3
seconds. (Make sure that 30 is
activated on the TV before using the
30 glasses.)
Turning the glasses off
Press the power button briefly. The
red LED is turned on for 3 seconds.
Perfonning the pairing process.
The green and red LEOs will blink for
2 seconds if pairing is in progress.
CAUTION
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D IMAGES. READ
THE FOLLOWING CAUTIONS BEFORE YOU OR YOUR CHILD USE THE 3D
FUNCTION.
Recommended viewing_d_i
st_an_ce_ __
2- 6m
(6to 19.5 ft)
50 ern or less
(19.5in)
The working distance depends on obstacles (a person, metal, walls, etc.) or
electromagnetic waves.
""" Turn off the 30 glasses while they are not in use. If you leave the 30 glasses
on, the battery lifespan decreases.
"'>.
+ Pairing steps
1. Turn on the TV, and then move the glasses within 19.5 inches of the TV
2. Press the power button on the 3D glasses briefly. The 3D glasses will power
on and patring will start.
3. The message "3D glasses are connected to TV " will be displayed on the 1V
screen when the pairing is successfully completed.
~ If the pairing failed, the 30 glasses will power off.
~ If the first attempt to pair fails, power the 1V off and on again and perform step 2.
~ How to pair again: Press the power button on the 30 glasses for more than 1
seconds.
<Pairing is needed again in the following situations:>
- If the 30 glasses do not function even when the power button is pressed
on the 3D 1V after repair.
- If you want to view a 30 video on a different for all 2011 and 2012
Samsung D,E and ES series 30 1V.
• Adults should frequently check on children who are using the 30
function. If there are any complaints of tired eyes, headaches, dizziness
or nausea, stop the child from viewing the 3D TV and ensure that they
rest.
• Do not use the 30 glasses for other purposes such as general wear,
sunglasses, protective goggles, etc.
• Some viewers may experience discomfort such as dizziness, nausea
and headaches while viewing 30 1V. If you experience any of these
symptoms, stop viewing the 30 1V, remove the 30 glasses and rest for
awhile.
• Watching 3D pictures for an extended period of time may cause eye
strain. If you experience any eye strain, stop viewing the 3D TV, remove
the 3D glasses and rest for awhile.
• Do not use the 3D function or 30 glasses while walking or moving
around. Using the 30 function or 3D Active Glasses while moving around
may result in injury from running into objects, tripping, and/or falling.
l'i*"MIM
I
•
SAFETY PRECAUTIONS
WARRANTY
The following safety instructions are to ensure your personal safety and
prevent property damage. Please read them to ensure the proper use of the
product.
This Samsung product is warranted for the period of twelve (12) months from
the original date of purchase, against defective materials and workmanship. In
the event that warranty service is required, you should first return the product to
the retailer from whom it was purchased. However, Samsung Authorized Service
Centres will comply with this warranty during the Warranty Period. To obtain
details, please contact your nearest Authorized Service Centre.
•
Do not place the product in a location exposed to direct sunlig ht, heat,
fire or water. This may result in a product m alfunction or fire.
•
Do not apply force to the lenses of the 3D glasses. Do not drop or bend
the product. This may result in a product malfunction.
•
Use only the specified standard batteries. When replacing the battery,
1nsert the battery so that its polarity(+ , -)is correct. Failing to do so
may damage the battery or result in fire, personal injury or environmental
damage caused by liqu1d leaking from the battery.
•
Keep the used battery out of the reach of children so that they do not
accidently swallow the battery. If your child has swallowed the battery,
consult your doctor immediately.
• W hen cleaning the product, do not spray water or cleaner directly onto
the surface of the product. Spraying water or c leaner directly onto the
glasses may resul t in fire or electric shock, damage to the product's
surface, or cause the indicator labels on the product 's surface to come
loose.
•
Do not use chemicals containing alcohol , solvents, or surfactants, or
chemicals such as wax, benzene , thinner, m osquito repellant, lubricant
or cleaners. These may cause a discoloration of or cracks in the product
surface and cause the indicator labels on the product's surface to come
loose.
• S1nce the product surface and lens are easily scratched, make sure
to use a clean soft cloth when clean1ng to avoid scratching either the
surface or the lens. As the product may become scratched if there are
any foreign items on the cloth, make sure to shake off any dust before
using it.
•
Never disassemble, repair, or modify the 3D glasses yourself. Do not use
t he glasses w hen they are out of order or b roken.
• Take care that you do not injure your eyes w ith the edges of the frame of
t he 3D glasses when wearing them.
Troubleshooting
PROCEDURE FOR MAKING A WARRANTY CLAIM
To make a claim under the warranty, you must contact the Samsung Contact
Centre (see details above) during the Warranty Period to discuss the problems
you are having with the product. If a repair or replacement is required, you will be
provided with a Warranty Claim Number and address of an Authorised Service
Centre. If you are provided with a Warranty Claim Number, to obtain a repair or
replacement of the product, you must send the product to the Authorised Service
Centre advised together with:
•
a copy of your completed warranty card or, if you have already provided
this to Samsung, your name, address and contact telephone nu mber;
•
your original receipt, invoice or sales slip for the purchase of the product
as new;
•
your Warranty Claim Numb er.
Samsung will then repair or replace the product and return it to you using
the contact details provided.
WARRANTY CONDITIONS
1. The warranty is only valid if the above procedure for making a warranty claim is
followed .
2. Samsung's obligations are limited to the repair or, at its discretion, replacement
of the product or the defective part.
3. Warranty repairs must be carried out by Samsung Authorised Service Centres.
No re-imbursement will be made for repairs carried out by service centres or
dealers that are not authorised by Samsung and any such repair work and
damage to the products caused by such repair work will not be covered by this
warranty.
4. This product is not considered to be defective in materials nor workmanship
by reason that it requires adaptation in order to conform to national or local
technical or safety standards in force in any country other than the one for
which the product was originally designed and manufactured. This warranty will
not cover, and no re-imbursement will be made for such adaptation, nor any
damage which may result.
5. The warranty does not apply to any product that has been damaged or
rendered defective as a result of any of the following excluded reasons, namely:
• as a result of accident, misuse, or abuse;
• through the failure to use this product for its normal purposes;
• by the use of parts not manufactured or sold by Samsung;
• by modification without the written permission of Samsung;
• by damage resulting from transit, neglect, power surge or failure;
• by damage resulting from lightning, water, fire, or acts of God;
• as a result of normal wear and tear; or
• difference in broadcasting methods or product standards between countries.
6. This warranty is valid for any person who legally acquired possession of the
product during the warranty period.
7. NOTHING IN THESE WARRANTY CONDITIONS SHALL EXCLUDE OR LIMIT
SAMSUNG'S LIABILITY FOR DEATH OR PERSONAL INJURY CAUSED BY
THE PROVEN NEGLIGENCE OF SAMSUNG, UNLESS SUCH LIMITATION OR
EXCLUSION IS PERMITIED BY APPLICABLE LAW
-4 ' F - 113 'F (-20'C - 45"C)
Product specifications may be changed without notice in order to enhance
product performance.
"<> The cont1nuous operating time may differ depending o n the wireless
communication environment and usage conditions.
'1.-;..
8. WITH THE EXCEPTION OF SAMSUNG 'S LIABILITY WHICH CANNOT BE
EXCLUDED OR LIMITED BY LAW, SAMSUNG SHALL NOT BE LIABLE FOR:
ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
LOSSES OR EXPENSES; OR LOST PROFITS; OR LOSS OF USE OR LOSS
OF DATA; OR DAMAGE TO GOODWILL, REPUTATION OR LOST BUSINESS,
ARISING DIRECTLY OR INDIRECTLY, FROM THE PURCHASE, USE OR SALE
OF THE PRODUCT, WHETHER OR NOT SAMSUNG WAS ADVISED OR
AWARE OF THE POSSIBILITY OF SUCH DAMAGES, LOSSES OR EXPENSES.
9. WITH THE EXCEPTION OF SAMSUNG'S LIABILITY WHICH CANNOT BE
EXCLUDED OR LIMITED BY LAW, SAMSUNG'S LIABILITY UNDER OR
IN CONNECTION WITH THIS WARRANTY OR THE PURCHASE, USE OR
SALE OF THE PRODUCT SHALL NOT EXCEED THE PRICE PAID FOR THE
PRODUCT AS NEW
10. UNLESS PROVIDED FOR IN THIS WARRANTY, ALL CONDITIONS,
WARRANTIES AND TERMS IMPLIED BY STATUTE OR OTHERWISE ARE
HEREBY EXCLUDED TO THE MAXIMUM EXTENT PERMISSIBLE BY LAW
11 . The above warranty conditions do not affect your statutory rights as a
consumer or otherwise.
l':ntii@iW
Regulatory Compliance Statements
+NCCTaiwan
1EUJJ¥~i!f~iilMt£~tlig!It'J¥it
~+=1~
~~~:tt~:lmt-&'lmz11£I.JJ¥t-t~l!~#IL ~~~~Hi'iT.
0i'il.
iii~
~~m•~~m~~~~M¥.~*~*~~~m~~zMtt&~~-
~+~• m~¥MM~mz~m~m••~M~~&~•i'l~~m,
~Bm~~•ma~. ~&•~•~-~~m••~m.M~-&'1~~
m~•m~•~~•z••~~m.m~¥t-tM~-~~~i'1~~
m.
ffi~IM.M.&HMffl~~Ht-ttt•m~Wz~··
+FCC COMPLIANCE
Federal Communication Commission Interference Statement
1) Changes or modifications not expressly approved by the party responsible for compliance
could vo1d the user's authonty to operate the equpment.
2)
NOTE: This equipment has been tes•ed and found to comply w1th the limits for a Class
B dig1tal dev1ce, pursuant to Part 15 of the FCC Rules. These lim1ts are designed to
prov1de reasonable protection aga1nst harmful1nterierence 1n a res1dent1al installation.
Th1s equipment generates, uses and can rad1ate radio requency energy and. 1f not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications However. there is no guarantee that interference will not occur
1n a particular installation. If this equ1pment does cause harmful Interference to rad1o
or television reception, which can be determined by turn1ng the equ1pment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures'
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio!TV technician for
help.
FCC Caution: Any changes or modif cations not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
+IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.
Cet appareil numerique de Ia classe B est conforme aIa norme
NMB-003 du Canada.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Italian Homologation Notice
Ouesto apparecchio e fabbricato in conformita al D.M.28.08.95 n.548
ed in particolare a quanto specificato nell Art.2, comma 1.
Questo apparecchio e fabbricato nella U.E. in conformita al
D.M.28.08.95 n.548 Art.2, comma 1 ed al D.M.26.03.92 Art.1
- For products produced in countries except European Community
Questo apparecchio e fabbncato in conformtta al D.M.28.08.95
n.548 ed in particolare a quanto specificato nell Art.2, comma 1.
- For products produced in European Community Questo
apparecchio e fabbricato nella U.E. in conformita al D.M.28 08.95
n.548 Art.2, comma 1 ed al D.M.26.03.92 Art.1
CE:
• Attaching the temples
+Pairing
· ·~
50cm (1.64ft)
• Pairing button (1 sec)
• Assembly complete
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
CANADA
North America
Latin America
CIS
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
BOLIVIA
COLOMBIA
COSTA RICA
DOMINICA
ECUADOR
ELSALVADOR
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PERU
PUERTO RICO
TRINIDAD & TOBAGO
VENEZUELA
RUSSIA
GEORGIA
ARMENIA
AZERBAIJAN
KAZAKHSTAN
UZBEKISTAN
KYRGVZSTAN
TADJIKISTAN
MONGOLIA
UKRAINE
BELARUS
MOLDOVA
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
Asia Pacific
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
Middle East
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421,4004-0000
800-SAMSUNG(726-7864), From mobile 02-482 82 00
800-10-7260
01-800011 2112
0-800-507-7267
1-800-751-2676
1-800-1 0-7267
800-6225
1-800-299-0013
800-27919267
1-800-234-7267
00-1800-5077267
800-7267
0-800-777-08
1-800-682-3180
1-800-SAMSUNG(726-7864)
0-800-1 00-5303
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-1 0-800-500-55-500(GSM: 7799)
8-1 0-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
0-800-502-000
810-800-500-55-500
00-800-500-55-500
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 11 00 11 ' 3030 8282, 1800 3000 8282' 1800 266 8282
0800-11 2-8888, 021-5699-7777
01 20-327-527
1800-88-9999
1-800-1O-SAMSUNG(726-7864) for PLOT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232, 02-689-3232
0800-329-999
0266-026-066
1 800 588 889
UA E
800-SAMSUNG (726-7864)
OMAN
KUWAIT
BAHRAIN
EGYPT
JORDAN
IRAN
MOROCCO
SAUDI ARABIA
TURKEY
NIGERIA
800-SAMSUNG(726-7864)
183-2255
8000-4726
08000-726786
800-22273
021-8255
080 100 2255
9200-21230
444 77 11
0800-726-7864
0800-1 0077
0302-200077
8000 0077
800-00-0077
7095-0077
0800 724 000
0800 300 300
0685 88 99 00
0860-SAMSUNG(726-7864)
GHANA
Africa
.
·;.,;
'
COTE D' LVOIRE
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
SOUTH AFRICA
""
'
www.samsung.com
www.samsunQ com/ca fr (French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
-
-
www.samsunq.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ua
www.samsung.com/ua ru
-
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/hk_en/
www.samsuno.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung,com
www.samsung.com
www.samsunq.com
www.samsung.com
www.samservice.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsunQ.com
www.samsung.com
www.samsunq.com
www.samsunq.com
www.samsung.com
www.samsunq.com
www.samsung.com
www.samsung.com
www.samsunq.com
www.samsung.com
www.samsung.com
www.samsung.com
1111111111111111111111111111111111111111111
BN68-04204B-OO
I
F
~
'ny problem
[!]£.~[!]
Search helpful video
samsung.com/spsn
_;t. ~
-[!]
,;.:'- •
Chat
samsung.com/support
DO NOT RETURN
TO STORE
I
.,...
IIIII ..-1
. . ..
Scan this with your
smartphone
Call Samsung Support
1-888-899-7604
Ill 1111 IIIII
BN68-03608A-08
Top 5 Troubleshooting Tips
TV 5 Problemas Principales
1. Can't Connect with Network or Apps (For internet supported
model only)
• Make sure there is a network connection
(Menu -7 Network -7 Network status)
• Contact your service provider
1. No se puede conectar con Ia Red o Apps (Solo para modelos que
soporten conexi6n a internet)
• Asegurese que el equipo este conectado a una red
(Menu -7 Red -7 Estado de Red)
• Contactar a su proveedor de Internet
2. No Picture/Sound or Distorted Picture/Sound with an External Device
• Make sure your connection to the device is correct.
• Perform a TV Self Diagnosis to identify the problem
(Menu -7 Support -7 Self Diagnosis -7 Sound or Picture Test)
• Change the picture size (Use "P. Size" button on your remote)
2. No hay lmagen/sonido o Distorsi6n
de lmagen/sonido con un dispositivo externo
• Asegure que Ia conexion ffsica del dispositive sea correcta
• Para identificar el problema, real ice un Auto diagnostico en Ia TV
(Menu -7 Soporte de Tecnico -7 Autodiagnostico
-7 Prueba de Imagen o Sonido)
• Cambie el tamario de Ia imagen (Use el boton "P. Size" del control remoto)
3. Poor Picture Quality
• Verify your signal is High Definition or Standard Definition
(Contact your service provider)
4. Your Settings are Lost after 30 Minutes
• Change to Home Mode
("Tools" on your remote -7 Store Demo Off)
5. "Weak or No Signal" Displayed in TV Mode I Cannot Find Channel
• Press Source button on your remote
• Run Auto Program and search for channels
(Menu -7 System -7 Plug &Play -7 Enter)
Scan the QR code
to view our helpful
How-to Videos
Escanear el Codigo QR para ver nuestros
videos demostrativos de Video Guia
1.g
[!]
. .
3. Mala Calidad de Imagen
• Verificar si su serial es Alta Definicion o Definicion Regular
(Contactar a su proveedor de Servicios)
4. Su configuraci6n se pierde despues de 30 minutos
• Cambiar a Uso Domiciliario
(Use el boton "Tools" del control remoto -7 Demo Comercio Desac.)
5. "Seiiales Debiles o lnexistentes" Mensaje desplegado en
TV Mode I No puede encontrar canales
• Presione el boton "Source" en su control remoto
• Corra Auto Program e inicie busqueda de canales
(Menu -7 Sistema -7 Plug &Play -7 Enter)
CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary CR {Manganese
Dioxide) Lithium coin cells in the product sold or distributed ONLY
in California USA
11
Perchlorate Material -special handling may apply,
See www.dtsc.ca.gov/hazardousw aste/perchlorate.
11
BN68-01172A-OO
5GREAT EAS
SFORS lTC I G ODI ECT
DIRECTV deliver s more full-ltme HD channels'
than any other cable or satellite providerover 170-including local channels plus the most
sports! ' You'll also get access to the most movtes
in 1080p' with Dolby Digital5.1 Sur round Sound.'
for a viewing experience that redefines
home entertatnmentl
Plus, get up to 47 FREE premium channels for
3 months with the CHOICE'" package or higher!
HE
:m•wnME.
The most full-time HD channels'
X
X
Sharpest picture available with the most movies in 1080p.'
many with Dolb~ Oigital5.1 Surround Sound'
X
X
Exclusive sports packages: NFL SUNDAY TICKET;' NASCAR HotPass...,
X
X
#1 in Customer Satisfacti on
X
X
X
X
X
X
Itt
1'
!(I
Ar-11,.
~....
rt
•&SJ'
i!lll4
•S...
m
Get bundled Internet and phone services coast-to-coast
with top names like AT&T!' Century Linke and Verizonen
,.
-.-
0
~
'·-·
5
When you use the new DIRECTV HI -DEF GUIDE.
you"ll spend less time searchtng and more lime
watching' With faster scrolling. smarter
searching. and a sleeker design. our new HD
on-screen guide makes controlling you r TV
an intuitive and enjoyable experience!8
1
Bring home the ultimate television experience.
II
·~
•
From your favorite teams
to your fantasy teams,
DI RECTV spor ts coverage
1S undefeated.'
'Ct
~ C ~t
t
ccess o 70... J Clnnnels
No equipment to buy.
FREE professional 1nstallation.
More of the
channels you really
want to watch in
full-time HD?
,,,,..,t.. aluo.,.·c" ..,~1
-
' "' "' ,,.,,. '"'"'
-
SAVE $120 WHEN YOU CALL THIS DEDICATED NUMBER: 1-888-778-8797
,
~r.~wt
FX
n1ootJr:
0' AlB ~
~
II
Ml!" t3~
II!:C .. msnbc
~
-ttr.
l%lCJ
i5Fii
i?..n E) <iD
~rg
=
~. ~ U:a C!! ., :#l'.?:J.'#l
p;r;
.,...,..... ,.lhlll!l4t.'IIH1 ""-9".,..li-110'11t;<...,l_.. ••
8
C·SPAN2 .'-.
Mi -
fJ,.,
llJilJ(!IAME~ICA
~ ~ e;;=;-.c·-s aer-tt 12_ n
"nHtn nlo +.~\~.!. ljlml H
i1?hv
D 0
C·SPAN
mm
~ tft·""'
curn:ont_
lit II ¥II ao~aMOI1!s
r:m
~:-::. s::::3
Eiriii!
••
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol alerts you that important literature
concerning operation and maintenance has been
included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confmed space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
• Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming. pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
Make sure to pull out the power cord from the outlet before cleaning.
• This appratus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly under
environmental considerations. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the
local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is fmnly inserted. When removing the power cord, make sure to hold the power plug when
pulling the plug from the outlet. Do not touch the power cord with wet hands.
• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of
time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the
insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high
humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc.
Failure to do so may cause serious damage to your set.
• Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage. (Class I Equipment only.)
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily
operable.
• Do not allow children to hang onto the product.
• Store the accessories (battery, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.
• Apparatus shall not be exposed to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble or overheat the batteries.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• W ARNlNG- TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.
-English-
Regulatory Compliance Statements
- Federal Communications Commission (FCC)- USA
-Industry Canada Equipment Standard for Digital Equipment (ICES-003)- Canada
- Voluntary Control Council for Interference (VCCI) - Japan
- Bureau of Standards Metrology and Inspection (BSMI) - Taiwan
- Korea Communications Commission(KCC) - Republic of Korea
-Italian Post Ministry (Homologation)- Italy
FCC Class A Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
FCC Class B Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
User Information
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment. If necessary, consult with your dealer or an experienced radio/television technician for additiona
suggestions. You may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful.
This booklet was prepared by the Federal Communications Commission. It is available from the U.S. Government Printing Office.
Washington, DC 20402, Stock Number 004-000-00345-4.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD.
America QA Lab of Samsung
3351 Michelson Drive
Suite #290, Irvine, CA92612 USA
Warning
User must use shielded signal interface cables to maintain FCC compliance for the product.
Provided with this monitor is a detachable power supply cord with IEC320 style terminations.
It may be suitable for connection to any UL Listed personal computer with similar configuration.
Before making the connection, make sure the voltage rating of the computer convenience outlet is the same as the monitor and
that the ampere rating of the computer convenience outlet is equal or exceeds the monitor voltage rating.
For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type(parallel blades) plug
cap. For 240 Volt applications use only UL Listed detachable power supply cord with NEMA configuration 6-15P type
(tandem blades) plug cap.
This television receiver provides display of television closed captioning in accordance with Section 15.119 of the FCC rules.
(TV broadcast receivers with picture screens 13 inches or larger in diameter models only)
/CES-003 Class A Notice- Avis NMB-003, Classe A
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de Ia classe A est conforme a Ia norme NMB-003 du Canada.
/CES-003 Class B Notice - Avis NMB-003, C/asse B
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de Ia classe B est conforme a Ia norme NMB-003 du Canada.
VCCI Class A Notice
.:: (])~-f;t, ? 7 7-.A
~lllttf*i~tl:~9 o
.:: (])~fl ~~Jillltt~ilm9 ~ t: -~~w ~ s 1~~.:: 9.:: t: tl· ~ L.J *9 o
.:: (])fl~l::f;tilm:ftt.J<iitJ.Jt~~• ~~9 ~ J:? ~* 2: n~.:: t: t.J<~ L.J *9 0
VCCI Class B Notice
.:: (])~ffl;i:, ? 7 A. B 11lllttf*i~TI~9 o
.:: (])~11f;t, ~JilJI±l~ilJf.l9 ~.:: l:: ~ El tf.J l:: L -c L' *9"/J<, .:: (])~flt.J<7 ://j-~7" L..tt::' :/ 3 ~:i:i~t~f::ilitl L -c
ilm 2:n~ t: .. :W:mlllW~sl ~~.:: 9.:: t: t.J<~ L.J *9 o nm~a..ij•f=Ut? -cl£ L "'liX L.J t&L '~ L -c""F 2: "'o
CCC Class A notice - China
!lt79A~tz:~. t£:£m;;ffir:p. ~tz:~ PJ~~~~J£7C~~~m o
B: ~#M&~. PJ~~~ffl~~~~m*~W ~ PJfr~m~ o
SSM/ Class A Notice
The following statement is applicable to products shipped to Taiwan and marked as Class A on the product
compliance label.
~-a~mt3:
~~~••mm~£·tr@tt$~~~m~·~~-~~Mm~•·tr~&m~~·
~m~•~•*~~~®~~~fim o
European Notice(Europe Only)
-
(E
Products with the CE marking comply with the EMC Directive(2004/1 08/EC) and the Low Voltage
Directive(2006/95/EC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms:
EN55022: Radio Frequency Interference
EN55024: Electromagnetic Immunity of Information Technology Equipment
EN61 000-3-2: Power Line Harmonics
EN61 000-3-3: Voltage Fluctuations
EN55013: Radio disturbance characteristics of broadcast receivers and associated equipments
EN55020: Electromagnetic immunity of broadcast receivers and associated equipments
European Class A Warning
(If the user manual declares the product as Class A, following statement applies.)
This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
As 7/7/(gj.Ep.~ ~~gt.f7/XfXH)
017171~ ~¥~A~) ~:A~n~~~717I~Ai ~DH:A~ EE.~ A~:A~~
7~£12.1 :AI~OiiAi A~oi-E ~~ ~~.2.£ gtqc~.
Ol
~~ 2?-2.1o~AI7II::j~2.~~.
BE- 7/7/(7~~ ~~gt}7/XfXH)
017171~ 7~~~8~) ~:A~~~gj-717I~Ai 2?-~ 7~0i1Ai A~o~ ~~ ~~.2.£ o~~. 2~ :AI~OiiAi A~~* <U~LICL
Italian Homologation Notice
Questa apparecchio e fabbricato in conformita al D.M.28.08.95 n.548
ed in particolare a quanta specificato nell Art.2, comma 1.
Questa apparecchio e fabbricato nella U.E. in conformita al D.M.28.08.95 n.548
Art.2, comma 1 ed al D.M.26.03.92 Art.1
-. For products produced in countries except European Community
Questa apparecchio e fabbricato in conformita al D.M.28.08.95 n.548
ed in particolare a quanta specificato nell Art.2, comma 1.
-. For products produced in European Community
Questa apparecchio e fabbricato nella U.E. in conformita al D.M.28.08.95 n.548
Art.2, comma 1 ed al D.M.26.03.92 Art.1
Important Safety lnstructions(UL Only)
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one \vider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles. and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with cart, stand, tripod, bracket, or table specified by the manufacturer. or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any \\'ay. such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Ventilation
Do not place the apparatus in a rack or bookcase. Ensure that there is adequate ventilation and that you've
followed that manufacturer's instructions for mounting and installation.
This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields.
Contains Mercury, Dispose According to Local, State or Federal Laws
I 1111111111111111111111111
AA68-03242L-08
SAMSUNG BRAND PRODUCTS
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original
consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty
period of: (90 Days Parts and Labor for Commercial Use)
Categories
Parts
Labor
Size
Service
LCD/LED TV
1 Year
1 Year
40" and Larger
Carry-In or In Home
1 Year
2Year
37" and Smaller
All
All
Carry-In
Carry-In or In Home
Carry-In or Pick up
Plasma Display
Projector (Excluding Lamp**)
1 Year
2 Year
PICO & LED Pocket Projector
1 Year
1 Year
All
Carry-In or Pick up
** 180 Days after Purchasing and 600 Hours of Use Lamp on Projector
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To
receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can
only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of
purchase to SAMSUNG or SAMSUNG's authorized service center.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or
products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property
ofSAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90)
days, whichever is longer.
Certain products are eligible for In-home service at Samsung's discretion. To receive in-home service, the product must be unobstructed
and accessible to service personnel. If during in-home service repair can not be completed, it may be necessary to remove, repair and ·
return the product. If in-home service is unavailable, SAMSUNG may elect, at our option, to provide for transportation of our choice
to and from a SAMSUNG authorized service center. Otherwise, and for 37" and smaller LCD/LED TV, transportation to and from the
SAM SUNG authorized service center is the responsibility of the purchaser.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent
otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but
not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended;
altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of
nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external
wiring or connectors not supplied or authorized by SAMSUNG which damage this product or result in service problems; incorrect
electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance
and environmental instructions that are covered and prescribed in the instruction book; reception problems and distortion related to
noise, echo, interference or other signal transmission and delivery problems; brightness related to normal aging, or burned-in images.
SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND
NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER
THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY
GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON
SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE
SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY
ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT
THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.
WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS,
DAMAGE OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED
DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE
REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG at:
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660-2112
1-800-SAMSUNG (7267864)- www.samsung.com
1-800-749-0260: Only Projector
IMPORTANT WARRANTY INFORMATION REGARDING TELEVISION FORMAT VIEWING
Standard screen fonnat televRons (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard fonnat full-motion video.
The image; displayed on them should primarily be in the standard 4:3 rntio fonnat and constantly moving. Displaying stationary graphics and images on screen, such
as the datk top and bottom letterbox bars (wide screen picttire;), should be limited to no more than 15% ofthe total television viewing per week.
Wtde screen fonnat televRons (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen fonnat full-motion video.
The images displayed oo them should primarily be in the wide screen 16:9 rntio focmat, or eXJlllldOO to fill the screen ifyour mooel offers this feature, and constantly
moving. Displaying stationary graphics and images on screen, such as the datk side-OOrs on IlOtl-eXJXlllde standard fonnat television video and progrannning, should
· be limited to no more than 15% ofthe total television viewing per week
Additionally, viewing other stationazy images and text such as stock matket reports, video game displays, station logos, web ~ or computer graphics and patterns,
shoold be limited as dembed above for all televisions. Displaying any stationary image; that exceed the above guideline; can cause uneven aging of Plasma Display
Panels that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the progrnmming and irrlage;, and primarily display full
screen moving image;, not stationary JX11terns or datk bars. On televisioo models that offcr picture sizing featllre;, use 1he;e controls to view the different fonnats as a
full screen picture.
Be careful in the selection and duration of televSon fonnats used for viewing. Uneven Plasma Display Pan~ aging as a result of fonnat selection and use,
as well as other burned-in images, is not covered by your Samsung 6mited warranty.
I 1111111111111111111111111
BP68-00263 E-03