Samsung DVD-R131 Service manual

DVD- RECORDER
Chassis : ANDES (3rd Generation)
DVD-R130/ COM, EUR, SED, XEB, XEC, XEE, XEF, XEG,
DVD-R131/
SERVICE MANUAL
DVD-R130 / R131
SERVICE
DVD-RECORDER
XEH, XEN, XEO, XET, XEU, XEV, AFR, AND,
SMR, UMG, XSG, XFA, XSA, RAD, XSH, XSS,
XST, XTL, SAM, XSE, XSV, CHN, HAC, TAW,
SEO
COM, EUR, SED, XEB, XEC, XEE, XEF, XEG,
XEH, XEN, XEO, XET, XEU, XEV, AFR, AND,
SMR, UMG, XSG, XFA, XSA, RAD, XSH, XSS,
XST, XTL, SAM, XSE, XSV, CHN, HAC, TAW,
SEO
Manual
Merit & Character regarding Product
ΠMulti format recording
DVD-RW/ DVD-R
ELECTRONICS
´ Multi format playback
DVD/ DVD-RAM/ DVD-RW/ DVD-R
CD/ CD-R/ CD-RW/ MP3/ JPEG/ VCD
ˇ Recording mode
XP(1Hour)/ SP(2Hour)/ LP(4Hour)/ EP(6~8Hour)
¨ Progressive scan
ˆ DV Input
Ø 49mm Slim Design
∏ Quick Recording
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
international and/or domestic law.
© Samsung Electronics Co., Ltd. APR. 2006
Printed in Korea
AK82-01026A
CONTENTS
1. Precautions
1-1
1-2
1-3
1-4
Safety Precaution
Servicing Precautions
ESD Precautions
Handling the optical pick-up
2. Product Specification
2-1 Product Specification
2-2 Chassis Product Specification
2-3 Option Product Specification
3. Software Update
3-1 Drive Firmware Update
3-2 Flash Update
4. Disassembly and Reassembly
4-1 Cabinet and PCB
4-2 PCB Location
5. Trouble Shooting
6. Exploded View and Parts List
6-1 Cabinet Assembly (DVD-R130)
6-2 Cabinet Assembly (DVD-R131)
7. Electrical Parts List
8. Block Diagram
8-1
8-2
8-3
8-4
8-5
8-6
All Block Diagram
AIC1(PCM1753) Audio DA Block Diagram
System Block Diagram
TIC1(TW9906) Video Decoder Block Diagram
Internal Block Diagram
HA118827F-E Block Diagram
(1-1 ~ 1-6)
(1-1)
(1-3)
(1-4)
(1-5)
(2-1 ~ 2-4)
(2-1)
(2-2)
(2-3)
(3-1 ~ 3-4)
(3-1)
(3-3)
(4-1 ~ 4-6)
(4-1)
(4-6)
(5-1 ~ 5-12)
(6-1 ~ 6-6)
(6-2)
(6-4)
(7-1 ~ 7-14)
(8-1 ~ 8-8)
(8-2)
(8-3)
(8-4)
(8-5)
(8-6)
(8-7)
CONTENTS
9. Wiring Diagram
(9-1 ~ 9-2)
10. PCB Diagrams
(10-1 ~ 10-6)
10-1 Main PCB
10-2 Jack PCB
10-3 Key PCB
11. Schematic Diagrams
11-1 S.M.P.S. (Jack PCB)
11-2 A2 / NICAM (Jack PCB)
11-3 Connection (Jcak PCB)
11-4 Front AV (Jack PCB)
11-5 I/O (Jack PCB)
11-6 I/O Switching (Jack PCB)
11-7 LED Driver (Jack PCB)
11-8 Power (Jack PCB)
11-9 System Control (Jack PCB)
11-10 TM (Jack PCB)
11-11 VPS_PDC (Jack PCB)
11-12 DVD AV Codec (Main PCB)
11-13 DVD Audio In/Out (Main PCB)
11-14 DVD DDR (Main PCB)
11-15 DVD Main Connector (Main PCB)
11-16 DVD Video Deocder (Main PCB)
11-17 IEEE 1394 (Main PCB)
11-18 Key (Key PCB)
(10-2)
(10-4)
(10-6)
(11-1 ~ 11-20)
(11-3)
(11-4)
(11-5)
(11-6)
(11-7)
(11-8)
(11-9)
(11-10)
(11-11)
(11-12)
(11-13)
(11-14)
(11-15)
(11-16)
(11-17)
(11-18)
(11-19)
(11-20)
CONTENTS
12. Operating Instructions
(12-1 ~ 12-10)
13. Circuit Operating Descriptions
(13-1 ~ 13-16)
13-1
13-2
13-3
13-4
13-5
13-6
13-7
Power
AV Codec
SERVO (DVP Multi Drive)
Video In/Out block
Audio
Tuner
IF
14. Reference Information
14-1 Introduction to DVD
14-2 DVD-Video Fromat
14-3 About IEEE1394
(13-1)
(13-4)
(13-7)
(13-9)
(13-12)
(13-14)
(13-15)
(14-1 ~ 14-12)
(14-1)
(14-3)
(14-9)
1. Precautions
1-1 Safety Precautions
1) Before returning an instrument to the customer,
always make a safety check of the entire instrument,
including, but not limited to, the following items:
(1) Be sure that no built-in protective devices are
defective or have been defeated during servicing.
(1)Protective shields are provided to protect both
the technician and the customer. Correctly replace
all missing protective shields, including any
removed for servicing convenience.
(2)When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place
all protective devices, including, but not limited to,
nonmetallic control knobs, insulating fish papers,
adjustment and compartment covers/shields, and
isolation resistor/capacitor networks. Do not operate this instrument or permit it to be operated without all protective devices correctly installed and
functioning.
(2) Be sure that there are no cabinet openings through
which adults or children might be able to insert
their fingers and contact a hazardous voltage. Such
openings include, but are not limited to, excessively wide cabinet ventilation slots, and an improperly fitted and/or incorrectly secured cabinet back
cover.
(3) Leakage Current Hot Check-With the instrument
completely reassembled, plug the AC line cord
directly into a 230V(220V ~ 240V) AC outlet. (Do
not use an isolation transformer during this test.)
Use a leakage current tester or a metering system
that complies with American National Standards
institute (ANSI) C101.1 Leakage Current for
Appliances and Underwriters Laboratories (UL)
1270 (40.7). With the instrument’s AC switch first in
the ON position and then in the OFF position, measure from a known earth ground (metal water pipe,
conduit, etc.) to all exposed metal parts of the
instrument (antennas, handle brackets, metal cabinets, screwheads, metallic overlays, control shafts,
etc.), especially any exposed metal parts that offer
an electrical return path to the chassis.
Any current measured must not exceed 0.5mA.
Reverse the instrument power cord plug in the outlet and repeat the test. See Fig. 1-1.
Any measurements not within the limits specified
herein indicate a potential shock hazard that must
be eliminated before returning the instrument to
the customer.
(READING SHOULD
NOT BE ABOVE
0.5mA)
LEAKAGE
CURRENT
TESTER
DEVICE
UNDER
TEST
TEST ALL
EXPOSED METER
SURFACES
2-WIRE CORD
ALSO TEST WITH
PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)
EARTH
GROUND
Fig. 1-1 AC Leakage Test
(4) Insulation Resistance Test Cold Check-(1) Unplug
the power supply cord and connect a jumper wire
between the two prongs of the plug. (2) Turn on the
power switch of the instrument. (3) Measure the
resistance with an ohmmeter between the
jumpered AC plug and all exposed metallic cabinet
parts on the instrument, such as screwheads,
antenna, control shafts, handle brackets, etc. When
an exposed metallic part has a return path to the
chassis, the reading should be between 1 and 5.2
megohm. When there is no return path to the chassis, the reading must be infinite. If the reading is
not within the limits specified, there is the possibility of a shock hazard, and the instrument must be
repaired and rechecked before it is returned to the
customer. See Fig. 1-2.
Antenna
Terminal
Exposed
Metal Part
ohm
ohmmeter
Fig. 1-2 Insulation Resistance Test
Samsung Electronics
1-1
Precautions
2) Read and comply with all caution and safety related notes on or inside the cabinet, or on the chassis.
3) Design Alteration Warning-Do not alter or add to
the mechanical or electrical design of this instrument. Design alterations and additions, including
but not limited to, circuit modifications and the
addition of items such as auxiliary audio output
connections, might alter the safety characteristics of
this instrument and create a hazard to the user. Any
design alterations or additions will make you, the
servicer, responsible for personal injury or property
damage resulting therefrom.
4) Observe original lead dress. Take extra care to
assure correct lead dress in the following areas:
(1) near sharp edges, (2) near thermally hot parts (be
sure that leads and components do not touch thermally hot parts), (3) the AC supply, (4) high voltage,
and (5) antenna wiring. Always inspect in all areas
for pinched, out-of-place, or frayed wiring, Do not
change spacing between a component and the
printed-circuit board. Check the AC power cord for
damage.
1-2
5) Components, parts, and/or wiring that appear to
have overheated or that are otherwise damaged
should be replaced with components, parts and/ or
wiring that meet original specifications.
Additionally, determine the cause of overheating
and/or damage and, if necessary, take corrective
action to remove any potential safety hazard.
6) Product Safety Notice-Some electrical and mechanical parts have special safety-related characteristics
which are often not evident from visual inspection,
nor can the protection they give necessarily be
obtained by replacing them with components rated
for higher voltage, wattage, etc. Parts that have special safety characteristics are identified by shading,
an (
)or a (
)on schematics and parts lists. Use
of a substitute replacement that does not have the
same safety characteristics as the recommended
replacement part might create shock, fire and/or
other hazards. Product safety is under review continuously and new instructions are issued whenever appropriate.
Samsung Electronics
Precautions
1-2 Servicing Precautions
CAUTION : Before servicing units covered by this
service manual and its supplements, read and follow
the Safety Precautions section of this manual.
Note : If unforseen circumstances create conflict
between the following servicing precautions and any
of the safety precautions, always follow the safety precautions. Remember: Safety First.
1-2-1 General Servicing Precautions
(1) a. Always unplug the instrument’s AC power cord
from the AC power source before (1) re-moving
or reinstalling any component, circuit board,
module or any other instrument assembly, (2)
disconnecting any instrument electrical plug or
other electrical connection, (3) connecting a test
substitute in parallel with an electrolytic capacitor in the instrument.
b. Do not defeat any plug/socket B+ voltage interlocks with which instruments covered by this
service manual might be equipped.
c. Do not apply AC power to this instrument and
/or any of its electrical assemblies unless all
solid-state device heat sinks are correctly installed.
d. Always connect a test instrument’s ground lead
to the instrument chassis ground before connecting the test instrument positive lead. Always
remove the test instrument ground lead last.
(4) An insulation tube or tape is sometimes used and
some components are raised above the printed
wiring board for safety. The internal wiring is
sometimes clamped to prevent contact with heating components. Install such elements as they
were.
(5) After servicing, always check that the removed
screws, components, and wiring have been installed correctly and that the portion around the
serviced part has not been damaged and so on.
Further, check the insulation between the blades of
the attachment plug and accessible conductive
parts.
1-2-2 Insulation Checking Procedure
Disconnect the attachment plug from the AC outlet
and turn the power ON. Connect the insulation resistance meter (500V) to the blades of the attachment
plug. The insulation resistance between each blade of
the attachment plug and accessible conductive
parts(see note) should be more than 1 Megohm.
Note : Accessible conductive parts include metal panels, input terminals, earphone jacks, etc.
Note : Refer to the Safety Precautions section ground
lead last.
(2) The service precautions are indicated or printed on
the cabinet, chassis or components. When servicing, follow the printed or indicated service precautions and service materials.
(3) The components used in the unit have a specified
flame resistance and dielectric strength.
When replacing components, use components
which have the same ratings. Components identified by shading, by( ) or by ( ) in the circuit diagram are important for safety or for the characteristics of the unit. Always replace them with the exact
replacement components.
Samsung Electronics
1-3
Precautions
1-3 ESD Precautions
Electrostatically Sensitive Devices (ESD)
Some semiconductor (solid state) devices can be damaged easily by static electricity.
Such components commonly are called Electrostatically Sensitive Devices(ESD). Examples of typical ESD
devices are integrated circuits and some field-effect
transistors and semiconductor chip components. The
following techniques should be used to help reduce
the incidence of component damage caused by static
electricity.
(1) Immediately before handling any semiconductor
component or semiconductor-equipped assembly,
drain off any electrostatic charge on your body by
touching a known earth ground. Alternatively,
obtain and wear a commercially available discharging wrist strap device, which should be
removed for potential shock reasons prior to applying power to the unit under test.
(7) Immediately before removing the protective materials from the leads of a replacement ESD device,
touch the protective material to the chassis or circuit assembly into which the device will be
installed.
CAUTION : Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
(8) Minimize bodily motions when handling unpackaged replacement ESD devices. (Otherwise harmless motion such as the brushing together of your
clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient
to damage an ESD device).
(2) After removing an electrical assembly equipped
with ESD devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
(3) Use only a grounded-tip soldering iron to solder or
unsolder ESD devices.
(4) Use only an anti-static solder removal devices.
Some solder removal devices not classified as
“anti-static” can generate electrical charges sufficient to damage ESD devices.
(5) Do not use freon-propelled chemicals. These can
generate electrical charges sufficient to damage
ESD devices.
(6) Do not remove a replacement ESD device from its
protective package until immediately before your
are ready to install it.(Most replacement ESD
devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or
comparable conductive materials).
1-4
Samsung Electronics
Precautions
1-4 Handling the optical pick-up
The laser diode in the optical pick up may suffer electrostatic breakdown because of potential static electricity from clothing and your body.
WRIST-STRAP
FOR GROUNDING
1M
The following method is recommended.
(1) Place a conductive sheet on the work bench (The
black sheet used for wrapping repair parts.)
(2) Place the set on the conductive sheet so that the
chassis is grounded to the sheet.
(3) Place your hands on the conductive sheet(This
gives them the same ground as the sheet.)
(4) Remove the optical pick up block
(5) Perform work on top of the conductive sheet. Be
careful not to let your clothes or any other static
sources to touch the unit.
THE UNIT
1M
CONDUCTIVE SHEET
Fig.1-3
(6) Short the short terminal on the PCB, which is inside the Pick-Up ASS’Y, before replacing the PickUp. (The short terminal is shorted when the PickUp Ass’y is being lifted or moved.)
(7) After replacing the Pick-up, open the short terminal on the PCB.
◆ Be sure to put on a wrist strap grounded to the
sheet.
◆ Be sure to lay a conductive sheet made of copper
etc. Which is grounded to the table.
Samsung Electronics
1-5
Precautions
MEMO
1-6
Samsung Electronics
2. Product Specification
2-1 Product Specification
General
Input
Power requirements
AC 220-240V, 50Hz
Power consumption
21Watts
Weight
2.6 kg
Dimensions
430mm(W) x 240mm(D) x 49mm(H)
Operating temp
+5°C to +35°C
Other conditions
Keep level when operating. Less than 75% operating humidity
Video
Composite Video : 1.0 V p-p at 75ohm load, sync negative
Audio
Max. Audio input level : 2Vrms
DV Input
IEEE 1394(4p) compatible jack
Receivable Channels
PAL I
Scart Jack
AV1 (Scart TV)
Video : Composite, Audio : analogue
AV2 (Scart Ext)
Video : Composite, RGB Audio : analogue
Analogue output jacks X 2
Audio
Optical/coaxial digital audio output
Composite Video : Video output jack X 1
Output
Video
S-Video output X 1 (Y: 1.0Vp-p, C:0.286Vp-p at 75 ohm load)
Component output X 1 (Y: 1.0Vp-p ,Pb:0.70Vp-p, Pr:0.70Vp-p at 75ohm load)
Scart Jack
Recording
AV1 (Scart TV)
Picture compression format
MPEG-II
Audio compression format
Dolby digital 2ch/256kbps, MPEG-II
Recording Quality
Audio frequency characteristics
Samsung Electronics
Video : Composite, RGB Audio : analogue
XP (about 8 Mbps), SP (about 4 Mbps), LP (about 2 Mbps),
EP (about 1,2 Mbps or about 0,8 Mbps)
20 Hz ~ 20 KHz
2-1
Product Specification
2-2 Chassis Product Specification
General
Info
SYSTEM
RECORER
FUNCTION
SUB
FUNCTION
PLAYBACK
FUNCTION
IN/OUT
2-2
Model Name
Function
COLOR SYSTEM
BROADCAST SYSTEM
AUTO CLOCK
DVD-RAM
DVD-R
DVD-RW
VIDEO
AUDIO
HDD
Flexible Recording
OTR
Time Slip
VCR Plus+/Show View/G-Code
Quick Dubbing
EPG(Gemstar)
IR Blaster
Play List
Auto Chaptering
JPEG Browser with BG music
DV Input
10in2 Memory Slot
DVD-RAM/-R/-RW
DVD-Video/VCD/CD-DA
CD-R/RW
Music CD
MPEG4/Divx
Multi Memory Card
Progressive Scan Output
Upscaling(720P/1080i)
Video / Audio 21pin (on the rear)
Sat. 21 pin (om the rear) with RGB
Video/Audio in RCA Jack (on the front )
Video/Audio in RCA Jack (on the rear)
Video/Audio out RCA Jack (on the rear)
Additional Audio output (on the rear)
Aerial In / Ant.- out (on the rear)
RGB Output 21 pin
Coaxial Digital Audio output
Optical Digital Audio output
S-Video output (on the rear)
S-Video input (on the front)
S-Video input (on the rear)
DV input (on the front)
Component VIdeo Output
DVD-R120
DVD-R130
DVD-R131
Standard
PAL
I, B/G, D/K, L/L’
O
O
O
O
MPEG-2
2ch
O
O
O
O
O
O
O
O
O/O/(O)
O/-/O
O/O
O
O
O
Yes (AV1)
Yes (AV2)
Yes (AV3)
Yes x 1
Yes x 1
Yes
Yes (SCART-1) X 1
Yes x 1
Yes x 1
Yes x 1
Yes
Yes
Standard
PAL
I, B/G, D/K, L/L’
O
O
O
MPEG-2
2ch
O
O
O
O
O/O/(O)
O/-/O
O/O
O
O
O
Yes (AV1)
Yes (AV2)
Yes (AV3)
Yes x 1
Yes x 1
Yes
Yes (SCART-1) X 1
Yes x 1
Yes x 1
Yes x 1
Yes
Yes
Standard
PAL
I, B/G, D/K, L/L’
O
O
O
MPEG-2
2ch
O
O
O
O
O/O/(O)
O/-/O
O/O
O
O
O
Yes (AV1)
Yes (AV2)
Yes (AV3)
Yes x 1
Yes x 1
Yes
Yes x 1
Yes x 1
Yes x 1
Yes
Yes
Samsung Electronics
Product Specification
2-3 Option Product Specification
Description Fig
Description
Remote
Control
Batteries for
Remote Control
User’s Manual
Parts No
AK59-00055B
Remark
Model Standard of
DVD-R130/XEU
Model Standard of
4301-001035
DVD-R130/XEU
S.N.A
_
Model Standard of
DVD-R130/XEU
Model Standard of
Quick Guide
_
DVD-R130/XEU
S.N.A
Video/Audio
Cable
RF Cable
Samsung Electronics
AC39-42001R
AC39-00017A
Model Standard of
DVD-R130/XEU
Model Standard of
DVD-R130/XEU
2-3
Product Specification
MEMO
2-4
Samsung Electronics
3. Software Update
3-1 Drive Firmware Update
3-1-1 Introduction
When you can not record and play on specific recording media (especially on newly available DVD-RAM, DVD-RW or DVD-R).
3-1-2 How to make an update disc
• Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings :
1) Download the software update file from the samsung internet site. (www.samsung.com)
2) Write the file to disc using the CD-RW of your computer.
NOTE
• Recommended Application Program
- Nero Burning / Easy CD Creator ..etc
• Option
- Extension name : “*.SMD”
- Multisession : No Multisession
- File name lenght : Max. of 11 = 8 + 3
- Format : Mode 1
- Character set : ISO 9660 or Joliet Format
- CD Close & Dise at once
WARNING
It is very important : please read the below notice below before upditang your unit.
The followong events may interrupt the update process and MAY RESULT IN PERMANENT DAMAGE TO THE UNIT WHILE UPDATING
! Unplugging the power cord.
@ Power Outage.
# Dirt or Scratches on the disc.
$ Opening a disc tray during processing.
Samsung Electronics
3-1
Software Update
1) Press OPEN/CLOSE to open the disc tray.
2) Insert the update CD-R disc with the software update, label
facing up.
3) Press OPEN/CLOSE to close the disc tray.
* It takes about 1~2 minites before the mesage below appears.
Fig. 3-1 Remote Control
Drive Update
Do you want to update drive-firmware?
Version: Xx.X.R130 -> XX.X.R130
Atfer checking old and new version, select “Yes” or “No”
with “ ” or “ ” on the remote control.
* The Version is indicated by “XX.X modelname”
No
Yes
Fig. 3-2
* If you don’t see the message above, try another disc. Generally, this is caused by disc quality and by disc creating problem.
4) Press the OK button on the remote control (Fig. 3-1).
You will see “LOAD” on FLT Display.
Drive Update
Now, processing...
please, do not turn off the power.
Fig.3-3
5) It takes about 1~2 minutes to complete the update.
The message below will be displayed in the screen after update is completed and the tray will open automatically.
Drive Update
Drive firmware is successfully
updated.
Fig. 3-4
Fig. 3-5
6) After removing the update disc, turn off the unit with power button.
And there after turn on the unit with power button and then the will be closed.
The drive firmware is now completed.
3-2
Samsung Electronics
Software Update
3-2 Flash Update
3-2-1 Introduction
When you encounter the problem which is not related in drive firmware necessity.
3-2-2 How to make an update disc
Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings :
1) Download the software update file from the samsung internet site. (www.samsung.com)
2) Write the file to disc using the CD-RW of your computer.
NOTE
• Recommended Application Program
- Nero Burning / Easy CD Creator ..etc
• Option
- Multisession : No Multisession
- CD close & disc at once
- ISO 9660 or joliet format
- Extension name : “*.RUF”
• In order to increase dise playability, add a dummy file (over 100MB) together with the latest program.
(The dummy file can be used any kind of file except MP3 file etc which can be played in the unit and we recommend to use a file whin
extension name as “*.dmy”, which can be changed from original one.)
WARNING
It is very important : please read the below notice below before updating your unit.
The followong events may interrupt the update process and MAY RESULT IN PERMANENT DAMAGE TO THE UNIT WHILE UPDATING
! Unplugging the power cord.
@ Power Outage.
# Dirt or Scratches on the disc.
$ Opening a disc tray during processing.
Samsung Electronics
3-3
Software Update
1) Press OPEN/CLOSE to open the disc tray.
2) Insert the update CD-R disc with the software update, label
facing up.
3) Press OPEN/CLOSE to close the disc tray.
Fig. 3-6 Remote Control
Flash Update
Do you want to update flash memory?
Version : YYMMDD.xx.R130
-> YYMMDD.xx.R130
No
Yes
Atfer checking old and new version, select “Yes” or “No”
with “ ” or “ ” on the remote control.
* The Version is indicated by “YYMMDD.xx modelname”
Fig. 3-7
* If you don’t see the message above, try another disc.
Generally, this is caused by disc quality and by disc creating problem.
4) Press the OK button on the remote control (Fig. 3-6).
Flash Update
Now, Processing...
Plase. do not turn off the power.
Fig. 3-8
5) It takes about 5 minutes to complete the update.
The message below will be displayed in the screen after update is completed and the tray will open automatically.
Flash Update
* If the message to the left isn’t displayed after 10minutes
and the unit is no longer functioning properly, contact a
samsung authorized service center.
Flash memory is successfully
updated.
Fig. 3-9
6) After removing the update disc, turn off the unit with power button.
And there after turn on the unit with power button and then the will be closed.
The Flash update is now completed.
3-4
Samsung Electronics
4. Disassembly and Reassembly
4-1 Cabinet and PCB
Note : Reassembly in reverse order.
4-1-1 Top Cabinet Removal
1) Remove 5 Screws Œ, ´, ˇ.
2) Lift up the Top Cabinet in direction of arrow.
´ 1 SCREW
(3 * 10 W)
Π3 SCREWS
(3 * 10 W)
ˇ 1 SCREW
(3 * 10 W)
Fig. 4-1 Top Cabinet Removal
Samsung Electronics
4-1
Disassembly and Reaasembly
4-1-2 Ass’y Front-Cabinet Removal
1) Release 6 Hooks Œ, ´, ˇ, ¨ and Ass’y Front-Cabinet ˆ.
Π1 HOOK
¨ 2 HOOKS
´ 1 HOOK
ˇ 2 HOOKS
ˆ ASS'Y FRONT-CABINET
Fig. 4-2 Ass’y Front-Cabinet Removal
4-2
Samsung Electronics
Disassembly and Reaasembly
4-1-3 Ass’y Deck Removal
1) Remove 4 Screws Œ, ´ from the Ass’y Deck ˇ and lift it up.
´ 2 SCREWS
Π2 SCREWS
(3 * 8 Y)
(3 * 10 Y)
ˇ ASS'Y-DECK
Fig. 4-3 Ass’y Deck Removal
Samsung Electronics
4-3
Disassembly and Reaasembly
4-1-4 Main PCB Removal
1) Remove 2 Screws Œ, from the Main PCB ´ and lift it up.
Π2 SCREWS
(3 * 10 Y)
´ MAIN PCB
Fig. 4-4 Main PCB Removal
4-4
Samsung Electronics
Disassembly and Reaasembly
4-1-5 Jack PCB Removal
1) Remove 7 Screws Œ, ´, ˇ ,¨from the Jack PCB ˆ and lift it up.
¨ 1 SCREW
Π4 SCREWS
(3 * 6 Y)
(3 * 6 Y)
ˆ JACK PCB
´ 1 SCREW
(3 * 8 W)
ˇ 1 SCREW
(3 * 6 W)
Fig. 4-5 Jack PCB Removal
Samsung Electronics
4-5
Disassembly and Reaasembly
4-2 PCB Location
MAIN PCB
JACK PCB
Fig. 4-6 PCB Location
4-6
Samsung Electronics
5. Troubleshooting
NO Power Detected
(Stand by LED OFF)
PAFT1 is normal?
No
Change fuse
Yes
PVDL1,PSDZ1,PVZL1
SHORT and OPEN
Are normal?
No
Change short circuited or
opened parts
Yes
Is there voltage at
PQIZ1[Pin 5]?
(Over 10V)
No
Change PQIZ1 IC.
Yes
Operation of PQIZ1 is
Normal?
No
Replace PQIZ1
Yes
Check feed back PQIZ1[PIN 3]
Is 5.8V
Samsung Electronics
5-1
Troubleshooting
There's no Digital Audio Out
Check Current Digital Audio
Setting is PCM.
No
Check the A/V Receiver
can Decode Current
Bit-Steam
Yes
ChecK Digital Audio data
at pin 2 of CN4
(MAIN PCB)
No
Set audio setting to
Bitstream in customer
menu.
Yes
No
Replace Main PCB
Yes
Check 5V AVJ5
No
Replace AVJ5
AUDIO DATA
Yes
Check the Cable
5-2
Samsung Electronics
Troubleshooting
CVBS (Video) output error
Video signal of
about 1Vp-p appears at
pin 17 of IC216.
No
Check the DIC1 on MAIN PCB
Yes
Analog signals are
Inputted normally
VIC1[pin4]
No
Check the connection between
10Pin in CN3 Of JACK PCB and VIC1
No
Check the connection between
VIC1[pin1] and Power line (VL6, PPIF1).
Yes
Power is
Normal(5v) at VIC1[pin1]?
Yes
Pin5 in VIC1 is
In high state?
Yes
Video signal of
About P-P1V appears at
Output Jack?
No
Check the connection between
VIC1(PIN5) and IC601(PIN89).
Check VIC1 peripheral circuit.
# IF Recorder is under PSO (progressive scan output) MODE, it does not
output the CVBS& S-Video signal.
No
Check the connection between
VIC1 and output jack.
CVBS(Color-bar)
Yes
Check the RCA Cable
Samsung Electronics
5-3
Troubleshooting
S-Video output error
Pin10 and
Pin8 in MCN2 of Jack PCB or
CN2 of Main PCB has *
normal level?
No
Check the DIC1 on MAIN PCB
Yes
Analog signals are
Inputted normally
VIC1(pin4,2)
No
Check the connection between
Pin10 and Pin8 in CN3 Of JACK PCB
and VIC1
No
Check the connection between
VIC1[pin1] and Power line (VL6, PPIF1).
Yes
Power is
Normal(5v) at VIC1(pin1)?
Yes
Pin5 in VIC1 is
In high state?
Yes
Video signal of
About P-P1V appears at
Output Jack?
# IF Recorder is under PSO (progressive
scan output) MODE, it does not output the CVBS& S-Video signal.
No
Check the connection between
VIC1(PIN5) and IC601(PIN89).
Check VIC1 peripheral circuit.
# Nomal level
: pin 10 is 1Vpk-pk
pin 8 is 0.28V on color burst
No
Y(Color-bar)
Check the connection between
VIC1 and output jack.
C(Color-bar)
Yes
Check the RCA cable
5-4
Samsung Electronics
Troubleshooting
AV1,AV2,AV3 CVBS Video Input Error
Pin 8,10,12 In IC216
Has about p-p 1V level?
No
Check the connection between
Pin 8,10,12 in IC216 and Pin-Jack.
Yes
Pin 35 In IC216
Has about p-p 1V signal?
Yes
No
Check Pin 35 in IC216
of input power(5V).
VIC1 of Main PCB Clock
A
VIC1 of Main PCB DATA
Samsung Electronics
5-5
Troubleshooting
Tuner Video Input Error
Tuner input line signal is OK?
(jack PCB)
No
Connect tuner line to TV directly
Yes
Supplied power
(Pin 3 : 5V pin 14 : 33V) for
tuner is OK?
No
Pin 3 : 5V pin 14 : 33V check its line
(jack PCB)
Yes
A
5-6
Samsung Electronics
Troubleshooting
Component output error
Pin2/4/6 in CN3 of
Jack PCB or CN2 of Main PCB
has * normal level?
No
Check the DIC1 on MAIN B/D.
Yes
Analog signals are
Inputted normally
VIC1(pin6/8/9)
No
Check the connection between
Pin2/4/6 in CN3 Of JACK PCB
and VIC1(pin6/8/9)
Yes
Power is
Normal(5v) at VIC1(pin1)?
No
Check the connection between
VIC1[pin1] and Power line (VL6, PPIF1).
Yes
Pin13 in VIC1 is
In high state?
No
Check the connection between
VIC1(PIN3) and IC601(PIN89).
Check VIC1 peripheral circuit.
Yes
Video signal of
About 1V pk-pk appears at
Output Jack?
Yes
Check the RCA cable
Y(Color-bar)
Samsung Electronics
No
Check the connection between
VIC1 and output jack.
# Nomal level
: pin 6 is 1Vpk-pk
pin 2/4 is + 0.35V
Pb(Color-bar)
Pr(Color-bar)
5-7
Troubleshooting
There is no Audio Output
Check audio signal
of 37,38 pin in IC216.
No
Check the Low state pin8 of the
Front Micom IC217(JACK PCB)
Yes
Check all the 5V pin8
of AIC1
(MAIN PCB)
No
Check SMPS
Yes
Check the audio signal pin7
pin8 of AIC1
(MAIN PCB)
No
Replace Main PCB
Yes
Check digital clock and
data pin1, 2, 3, 16 of AIC1
(MAIN PCB)
Yes
No
Replace MAIN PCB
AUDIO DATA
Check the passive parts
arond Jack pin.
5-8
Samsung Electronics
Troubleshooting
EDS [Extended data Services]
is abnormal
Tuner input line signal
is OK?
No
Tuner line connect TV directly.
Yes
IIC line (SCL,SDA) from
front micom is OK?
No
Check the IIC line
Yes
Does FX1 make 8MHz
signal? (jack PCB)
No
Check FX1 or around elements
Yes
Change FIC1 or check
around elements
Samsung Electronics
5-9
Troubleshooting
Disc Ioading error
Are Main and deck
power OK?
(5v, 12v)
No
Check he power
Yes
Is the 40pin
FFC cable(betweenmain & deck)
inserted correctly?
No
Reinsert FFC cable correctly
Yes
Is the wavefrom
of DIC3 pin26 normal?
(MAIN PCB)
Yes
No
Change the Main board
DIC3-Pin26
Change the deck
5-10
Samsung Electronics
Troubleshooting
Tuner Audio Out Abnormal
Tuner line signal is OK?
No
Connect tuner line to TV directly.
Yes
Supplied power
NIC1(Jack PCB) is OK?
(Pin 33 : about 9V)
No
Check its power line or around elements
Yes
4.5MHz signal from 15 pin
of tuner(TTM1) is OK?
No
Check the SIF signal or tuner
Yes
Does NX1 make
18.432MHz signal?
(jack PCB)
Yes
No
Check NX1 or around elements
Tuner Audio
If TIC1 is normal, refer to
audio line in abnomal
Samsung Electronics
5-11
Troubleshooting
MEMO
5-12
Samsung Electronics
6. Exploded View and Parts List
Page
6-1 Cabinet Assembly (DVD-R130) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6-2
6-2 Cabinet Assembly (DVD-R131) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6-4
Samsung Electronics
6-1
Exploded Views and Parts List
6-1 Cabinet Assembly (DVD-R130)
W009
W200
W009
H001
P001
W272
W275
FL261
W272
W275
P022
C015
W272
P025
W272
W268
S.N.A.: Service Not Available
A001
C001
W009
P007
C002
C657
6-2
Samsung Electronics
Exploded Views and Parts List
Loc. No
Parts No.
A001
C001
C002
C015
C657
FL261
H001
P001
P007
P022
P025
W009
W200
AK59-00055B
AK97-01447K
AK64-01432A
AK64-01375A
AK64-01433C
3809-001804
AK97-01553E
AK92-00928A
AK97-01530A
AK92-00822D
AC39-10019A
6003-000276
6003-001375
REMOCON-ASSY;DVD-R130/XEG,SEC,197.
ASSY-CABINET FRONT;HIPS 94 HB,DVDDOOR-TRAY;DVD-R130,ABS 94HB,T2,H15
CABINET-TOP;DVD-R110,PCM,T0.6,W430
DOOR-JACK;DVD-R130/XEF,ABS 94HB,T2
FFC CABLE-FLAT;30V,80C,55mm,13P,1m
ASSY-LOADER;,-,SV-R3600,LOADER ASS
ASSY PCB-MAIN;DVD-R130/XEG,PAL
ASSY PCB-KEY PCB;SV-R3600,ANDES
ASSY PCB-JACK;DVD-R130/XEV,PAL,CIS
CBF-POWER CORD;KKP-419C,H03VVH2-F,
SCREW-TAPTITE;BH,+,-,B,M3,L10,ZPC(
SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(YEL
1
1
1
1
1
1
1
1
1
1
1
8
2
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
W268
W272
W275
6003-000254
6003-001464
6003-001561
SCREW-TAPTITE;BH,+,-,S,M3,L6,ZPC(W
SCREW-TAPTITE;BH,+,B,M3,L10,ZPC(WH
SCREW-TAPTITE;BH,+,-,B,M3,L6,ZPC(Y
1
6
5
SA
SA
SA
Samsung Electronics
Description ; Specification
Q’ty S.N.A
Remark
6-3
Exploded Views and Parts List
6-2 Cabinet Assembly (DVD-R131)
W009
W200
W009
H001
P001
W272
W275
FL261
W272
W275
P022
C015
W272
P025
W272
W268
S.N.A.: Service Not Available
A001
C001
W009
P007
C002
6-4
Samsung Electronics
Exploded Views and Parts List
Loc. No
Parts No.
A001
C001
C002
C015
C657
FL261
H001
P001
P007
P022
P025
W009
W200
AK59-00055B
AK97-01464C
AK64-01690A
AK64-01375B
AK64-01691C
3809-001793
AK97-01553A
AK92-00928B
AK92-00958A
AK92-00822K
AC39-10019A
6003-000276
6003-001375
REMOCON-ASSY;DVD-R130/XEG,SEC,197.5*48*2
ASSY-CABINET FRONT;HIPS 94HB,DVD-R129,06
DOOR-TRAY;DVD-R135,ABS 94HB,T2,H15,W150,
CABINET-TOP;DVD-R130E,PCM,T0.6,W430,L220
DOOR-JACK;DVD-R129/XEF,ABS 94HB,T2,H15,W
FFC CABLE-FLAT;30V,80C,90mm,40P,0.5mm,UL
ASSY-LOADER;-,SV-R3600,LOADER ASSY
ASSY PCB-MAIN;DVD-R128/XEG,PAL,W/O DV
ASSY PCB-KEY;DVD-R129/XEG,PAL,A2 TOOL
ASSY PCB-JACK;DVD-R129/XEG,PAL,W/O DV IN
CBF-POWER CORD;KKP-419C,H03VVH2-F,VDE/KE
SCREW-TAPTITE;BH,+,-,B,M3,L10,ZPC(YEL),S
SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(YEL),SWRC
1
1
1
1
1
1
1
1
1
1
1
8
2
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
SA
W268
W272
W275
6003-000254
6003-001464
6003-001561
SCREW-TAPTITE;BH,+,-,S,M3,L6,ZPC(WHT),SW
SCREW-TAPTITE;BH,+,B,M3,L10,ZPC(WHT)
SCREW-TAPTITE;BH,+,-,B,M3,L6,ZPC(YEL),SW
1
6
5
SA
SA
SA
Samsung Electronics
Description ; Specification
Q’ty S.N.A
Remark
6-5
Exploded Views and Parts List
MEMO
6-6
Samsung Electronics
7. Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
P001
AC1
AC18
AE1
AE2
AK92-00928A
2203-005148
2203-005148
2402-001096
2402-000176
ASSY PCB-MAIN;DVD-R130/XEG,PAL
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-AL,SMD;220UF,20%,16V,GP,TP,6.6X6
C-AL,SMD;10uF,20%,16V,GP,TP,4.3x4.
1
1
1
1
1
SA
SA
SA
SA
SA
AIC1
AL1
CC1
CC2
CC3
1002-001395
3301-001419
2203-005148
2203-005148
2203-005148
IC-D/A CONVERTER;PCM1753,24Bit,SSO
BEAD-SMD;220ohm,1608,TP,133ohm/70M
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
CC4
CE1
CE3
CE4
CN5
2203-005148
2402-001059
2402-001059
2402-001059
3708-001935
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
CONNECTOR-FPC/FFC/PIC;40P,0.5mm,SM
1
1
1
1
1
SA
SA
SA
SA
SA
CON1
CON2
CR1
CR10
CR11
3710-002075
3710-002075
2007-000083
2007-000078
2007-000078
SOCKET-BOARD TO BOARD;30P,2R,2MM,S
SOCKET-BOARD TO BOARD;30P,2R,2MM,S
R-CHIP;3Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
CR2
CR3
CR4
DC1
DC10
2007-000074
2007-000079
2007-000082
2203-000384
2203-005148
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;1.8Kohm,5%,1/10W,TP,1608
R-CHIP;3.3Kohm,5%,1/10W,TP,1608
C-CER,CHIP;0.015nF,5%,50V,C0G,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC11
DC12
DC13
DC14
DC15
2203-005148
2203-005148
2203-005148
2203-005148
2203-001554
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;1.8nF,10%,50V,X7R,TP,16
1
1
1
1
1
SA
SA
SA
SA
SA
DC16
DC17
DC18
DC2
DC20
2203-001554
2203-001554
2203-001554
2203-000332
2203-005148
C-CER,CHIP;1.8nF,10%,50V,X7R,TP,16
C-CER,CHIP;1.8nF,10%,50V,X7R,TP,16
C-CER,CHIP;1.8nF,10%,50V,X7R,TP,16
C-CER,CHIP;0.012nF,5%,50V,C0G,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC22
DC23
DC24
DC25
DC26
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC27
DC28
DC29
DC30
DC31
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC32
DC33
DC34
DC35
DC36
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC37
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
SA
Samsung Electronics
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
DC38
DC39
DC4
DC40
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
SA
SA
SA
SA
DC41
DC42
DC43
DC44
DC45
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC46
DC47
DC48
DC49
DC50
2203-005148
2203-005148
2203-005148
2203-005148
2203-000975
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;47nF,10%,25V,X7R,TP,160
1
1
1
1
1
SA
SA
SA
SA
SA
DC51
DC52
DC53
DC54
DC56
2203-005148
2203-005148
2203-005148
2203-005148
2203-000440
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;1nF,10%,50V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC57
DC58
DC59
DC6
DC60
2203-005148
2203-005148
2203-005148
2203-005148
2203-000440
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;1nF,10%,50V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC61
DC62
DC63
DC64
DC65
2203-005148
2203-005148
2203-005148
2203-000440
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;1nF,10%,50V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC66
DC67
DC68
DC69
DC7
2203-005148
2203-005148
2203-000440
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;1nF,10%,50V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC70
DC71
DC72
DC73
DC74
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC75
DC76
DC77
DC78
DC79
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC8
DC80
DC81
DC82
DC83
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC84
DC85
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
SA
SA
This Document can not be used without Samsung’s authorization
7-1
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
DC86
DC87
DC89
2203-005148
2203-001683
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.068nF,5%,50V,NP0,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
SA
SA
SA
DC9
DC90
DC91
DC92
DC93
2203-005148
2203-005148
2203-005148
2203-005148
2203-000315
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.12nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DC94
DC95
DC96
DC97
DE2
2203-005148
2203-005148
2203-005148
2203-005148
2402-000007
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-AL,SMD;22uF,20%,6.3V,GP,TP,4.3x4
1
1
1
1
1
SA
SA
SA
SA
SA
DE3
DE4
DE5
DE6
DE7
2402-001059
2402-001059
2402-001059
2402-001059
2402-001059
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
1
1
1
1
1
SA
SA
SA
SA
SA
DE8
DIC1
DIC2
DIC3
DIC5
2402-001059
1205-002844
1105-001563
1107-001242
1103-001134
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
IC-CODEC;S5L3210,LQFP,256P,28x28mm
IC-DRAM;HYB25D256160CE-6,16Mx16Bit
IC-FLASH MEMORY;39VF160,1Mx16,TSOP
IC-EEPROM;24C040,512x8,SOP,8P,5.13
1
1
1
1
1
SA
SA
SA
SNA
SA
DIC6
DIC7
DIC8
DR1
DR12
1203-003038
0801-002701
0801-002166
2007-000072
2007-000070
IC-POSI.ADJUST REG.;LP2995,SO,8P,4
IC-CMOS LOGIC;74VHCT125A,BUFFER,TS
IC-CMOS LOGIC;7SHU04,INVERTER,SSOP
R-CHIP;47ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR13
DR14
DR15
DR16
DR17
2007-000070
2007-000070
2007-000070
2007-000070
2007-000070
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR18
DR19
DR2
DR20
DR21
2007-000070
2007-000070
2007-000084
2007-000070
2007-000070
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR22
DR23
DR24
DR25
DR3
2007-000070
2007-000070
2007-000070
2007-000070
2007-000084
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR30
DR32
DR34
DR35
DR36
2007-000084
2007-000084
2007-000070
2007-000078
2007-000086
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;5.6Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR37
DR38
DR39
DR40
DR41
2007-000077
2007-000070
2007-000102
2007-000084
2007-000074
R-CHIP;470ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;100Kohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;100ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR42
DR43
2007-000074
2007-001014
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;51OHM,5%,1/10W,TP,1608
1
1
SA
SA
7-2
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
DR44
DR47
DR48
2007-001014
2007-001014
2007-001014
R-CHIP;51OHM,5%,1/10W,TP,1608
R-CHIP;51OHM,5%,1/10W,TP,1608
R-CHIP;51OHM,5%,1/10W,TP,1608
1
1
1
SA
SA
SA
DR49
DR5
DR50
DR51
DR52
2007-000090
2007-000084
2007-000113
2007-000074
2007-000842
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;33ohm,5%,1/10W,TP,1608
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;3Kohm,1%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR55
DR6
DR64
DR65
DR66
2007-000074
2007-000084
2007-000070
2007-000070
2007-000070
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR67
DR68
DR69
DR7
DR70
2007-000070
2007-000070
3301-001309
2007-000070
3301-001309
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
BEAD-SMD;47ohm,1608,TP,-,R-CHIP;0ohm,5%,1/10W,TP,1608
BEAD-SMD;47ohm,1608,TP,-,-
1
1
1
1
1
SA
SA
SA
SA
SA
DR71
DR72
DR74
DR75
DR76
2007-000072
2007-000072
2007-000071
2007-000071
2007-000071
R-CHIP;47ohm,5%,1/10W,TP,1608
R-CHIP;47ohm,5%,1/10W,TP,1608
R-CHIP;22ohm,5%,1/10W,TP,1608
R-CHIP;22ohm,5%,1/10W,TP,1608
R-CHIP;22ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR77
DR8
DR80
DR82
DR83
2007-000070
2007-000109
2007-000078
2007-000084
2007-000084
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;1Mohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR87
DR88
DR89
DR9
DR90
2007-000084
2007-000084
2007-000084
2007-000070
2007-000084
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
DR91
DRP1
DRP10
DRP11
DRP12
2007-000084
2011-000585
2011-000585
2011-000475
2011-000475
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
1
1
1
1
1
SA
SA
SA
SA
SA
DRP13
DRP14
DRP15
DRP16
DRP17
2011-000475
2011-000475
2011-001194
2011-001194
2011-001194
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
1
1
1
1
1
SA
SA
SA
SA
SA
DRP18
DRP19
DRP2
DRP20
DRP21
2011-001194
2011-001194
2011-000585
2011-001194
2011-001194
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
1
1
1
1
1
SA
SA
SA
SA
SA
DRP22
DRP23
DRP24
DRP25
DRP26
2011-001194
2011-001194
2011-000515
2011-000515
2011-000515
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;51ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;4.7Kohm,5%,1/16W,L,CHIP,8P,T
R-NET;4.7Kohm,5%,1/16W,L,CHIP,8P,T
R-NET;4.7Kohm,5%,1/16W,L,CHIP,8P,T
1
1
1
1
1
SA
SA
SA
SA
SA
DRP27
2011-000515
R-NET;4.7Kohm,5%,1/16W,L,CHIP,8P,T
1
SA
This Document can not be used without Samsung’s authorization
Samsung Electronics
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
DRP3
DRP4
DRP5
DRP6
2011-000585
2011-000585
2011-000585
2011-000585
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
1
1
1
1
SA
SA
SA
SA
DRP7
DRP9
RIC1
RIC2
TC1
2011-000585
2011-000585
1203-003996
1203-003806
2203-000851
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;47ohm,5%,1/16W,L,CHIP,8P,TP,
IC-POSI.FIXED REG.;KIA78R025F,DPAK
IC-POSI.ADJUST REG.;KIA78R000,DPAK
C-CER,CHIP;0.039nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
TC10
TC11
TC12
TC13
TC14
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
TC15
TC2
TC3
TC4
TC5
2203-005148
2203-000851
2203-005148
2203-001607
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.039nF,5%,50V,C0G,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.22nF,5%,50V,NP0,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
TC6
TC7
TC8
TC9
TE1
2203-005148
2203-005148
2203-005148
2203-005148
2402-001238
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-AL,SMD;1uF,20%,50V,HR,TP,4.3x4.3
1
1
1
1
1
SA
SA
SA
SA
SA
TE2
TIC1
TPR2
TR10
TR11
2402-001059
1205-001988
2011-000002
2007-000078
2007-000078
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
IC-DATA COMM./GEN.;TSB41AB1-PAP,QF
R-NET;22ohm,5%,1/16W,L,CHIP,8P,TP,
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
TR12
TR13
TR14
TR15
TR16
2007-000078
2007-000090
2007-000078
2007-000078
2007-000090
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
TR17
TR19
TR2
TR20
TR21
2007-001056
2007-001044
2007-000090
2007-001044
2007-001044
R-CHIP;6.2Kohm,5%,1/10W,TP,1608
R-CHIP;56ohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;56ohm,5%,1/10W,TP,1608
R-CHIP;56ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
TR22
TR24
TR25
TR26
TR9
2007-001044
2007-000965
3301-001419
2007-000078
2007-000078
R-CHIP;56ohm,5%,1/10W,TP,1608
R-CHIP;5.1Kohm,5%,1/10W,TP,1608
BEAD-SMD;220ohm,1608,TP,133ohm/70M
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
TRP1
TY1
VC1
VC10
VC11
2011-000002
2801-004021
2203-005148
2203-005148
2203-005148
R-NET;22ohm,5%,1/16W,L,CHIP,8P,TP,
CRYSTAL-SMD;24.576MHz,20ppm,28-AAN
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
VC12
VC13
VC14
VC15
VC16
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
VC17
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
SA
Samsung Electronics
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
VC18
VC19
VC2
VC20
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
SA
SA
SA
SA
VC21
VC22
VC23
VC24
VC25
2203-005148
2203-005148
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
VC26
VC27
VC28
VC29
VC5
2203-005148
2203-000280
2203-005148
2203-005148
2203-005148
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.01nF,0.5pF,50V,C0G,16
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
VC6
VC7
VC8
VC9
VE3
2203-005148
2203-005148
2203-005148
2203-005148
2402-001059
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
1
1
1
1
1
SA
SA
SA
SA
SA
VE4
VIC1
VL1
VR14
VR15
2402-001059
1204-002436
2703-000398
2007-000113
2007-000080
C-AL,SMD;220UF,20%,6.3V,-,TP,6X6.6
IC-VIDEO DECODER;TW9909,TQFP,80P,1
INDUCTOR-SMD;10uH,10%,3225
R-CHIP;33ohm,5%,1/10W,TP,1608
R-CHIP;2Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
VR16
VR2
VR23
VR25
VRP3
2007-000080
2007-000113
2007-000074
2007-000070
2011-000816
R-CHIP;2Kohm,5%,1/10W,TP,1608
R-CHIP;33ohm,5%,1/10W,TP,1608
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-NET;100ohm,5%,1/16W,L,CHIP,8P,TP
1
1
1
1
1
SA
SA
SA
SA
SA
VRP4
Y1
2011-000816
2801-004095
R-NET;100ohm,5%,1/16W,L,CHIP,8P,TP
CRYSTAL-SMD;27MHz,20ppm,28-ABY,14p
1
1
SA
SA
P007
CN704
FL286
SW703
SW705
AK97-01530A
3708-001803
3809-001667
3404-001182
3404-001182
ASSY PCB-KEY PCB;SV-R3600,ANDES
CONNECTOR-FPC/FFC/PIC;10P,1.25MM,A
FFC CABLE-FLAT;30V,80C,70mm,10P,1.
SWITCH-TACT;DC12V,50MA,100GF,6.0X6
SWITCH-TACT;DC12V,50MA,100GF,6.0X6
1
1
1
1
1
SA
SA
SA
SA
SA
SW706
SW707
SW708
SW709
SW710
3404-001182
3404-001182
3404-001182
3404-001182
3404-001182
SWITCH-TACT;DC12V,50MA,100GF,6.0X6
SWITCH-TACT;DC12V,50MA,100GF,6.0X6
SWITCH-TACT;DC12V,50MA,100GF,6.0X6
SWITCH-TACT;DC12V,50MA,100GF,6.0X6
SWITCH-TACT;DC12V,50MA,100GF,6.0X6
1
1
1
1
1
SA
SA
SA
SA
SA
P022
AC1
AC2
AC3
AC4
AK92-00822D
2203-000491
2203-001126
2203-000783
2203-000783
ASSY PCB-JACK;DVD-R130/XEV,PAL,CIS
C-CER,CHIP;2.2nF,10%,50V,X7R,1608
C-CER,CHIP;0.68nF,10%,50V,X7R,1608
C-CER,CHIP;0.33nF,5%,50V,C0G,1608
C-CER,CHIP;0.33nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AC5
AC6
AC7
AC8
ACN1
2203-000491
2203-000257
2203-000257
2203-000257
3708-001695
C-CER,CHIP;2.2nF,10%,50V,X7R,1608
C-CER,CHIP;10nF,10%,50V,X7R,1608
C-CER,CHIP;10nF,10%,50V,X7R,1608
C-CER,CHIP;10nF,10%,50V,X7R,1608
CONNECTOR-FPC/FFC/PIC;13P,1MM,STRA
1
1
1
1
1
SA
SA
SA
SA
SA
This Document can not be used without Samsung’s authorization
7-3
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
ACN2
ACN4
AD1
AD2
AD3
3708-001802
3708-001695
0401-000005
0401-000005
0401-000005
CONNECTOR-FPC/FFC/PIC;10P,1.25MM,S
CONNECTOR-FPC/FFC/PIC;13P,1MM,STRA
DIODE-SWITCHING;1N4148,75V,150mA,D
DIODE-SWITCHING;1N4148,75V,150mA,D
DIODE-SWITCHING;1N4148,75V,150mA,D
1
1
1
1
1
SA
SA
SA
SA
SA
AHE44
AHE45
AHE46
AHE47
AHE48
2401-000408
2401-000426
2401-000408
2401-000426
2401-003221
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
C-AL;10uF,20%,16V,GP,TP,3.5x5,5
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
C-AL;10uF,20%,16V,GP,TP,3.5x5,5
C-AL;100uF,20%,16V,GP,TP,8X5,2.5
1
1
1
1
1
SA
SA
SA
SA
SA
AD4
AE1
AE2
AE24
AE25
0401-000005
2401-000249
2401-001249
2401-001249
2401-001249
DIODE-SWITCHING;1N4148,75V,150mA,D
C-AL;100uF,20%,10V,GP,TP,6.3x5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5
C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5
C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5
1
1
1
1
1
SA
SA
SA
SA
SA
AHL1
AHL2
AHL3
AHQ1
AHQ10
2701-000002
2701-000002
2701-000002
0501-000002
0501-000398
INDUCTOR-AXIAL;100UH,10%,4298
INDUCTOR-AXIAL;100UH,10%,4298
INDUCTOR-AXIAL;100UH,10%,4298
TR-SMALL SIGNAL;KSA812,PNP,150MW,S
TR-SMALL SIGNAL;KSC945-Y,NPN,250mW
1
1
1
1
1
SA
SA
SA
SA
SA
AE26
AE3
AE4
AE5
AHC11
2401-001249
2401-001249
2401-003480
2401-001479
2203-005148
C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5
C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5
C-AL;1000UF,20%,10V,LZ,TP,10X16MM,
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHR10
AHR11
AHR12
AHR13
AHR14
2007-000125
2007-000125
2007-000125
2007-000125
2007-000125
R-CHIP;3.9Kohm,5%,1/10W,TP,1608
R-CHIP;3.9Kohm,5%,1/10W,TP,1608
R-CHIP;3.9Kohm,5%,1/10W,TP,1608
R-CHIP;3.9Kohm,5%,1/10W,TP,1608
R-CHIP;3.9Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHC12
AHC14
AHC15
AHC16
AHC17
2203-005148
2203-005221
2203-000440
2203-005148
2203-000405
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;15nF,10%,50V,X7R,1608
C-CER,CHIP;1nF,10%,50V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.18nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHR15
AHR16
AHR17
AHR18
AHR19
2007-000125
2007-000125
2007-000125
2007-000081
2007-000097
R-CHIP;3.9Kohm,5%,1/10W,TP,1608
R-CHIP;3.9Kohm,5%,1/10W,TP,1608
R-CHIP;3.9Kohm,5%,1/10W,TP,1608
R-CHIP;2.7Kohm,5%,1/10W,TP,1608
R-CHIP;47Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHC18
AHC20
AHC21
AHD1
AHD10
2203-000440
2203-000405
2203-005148
0407-000123
0402-000165
C-CER,CHIP;1nF,10%,50V,X7R,1608
C-CER,CHIP;0.18nF,5%,50V,C0G,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
DIODE-ARRAY;DAN202K,80V,100mA,CA2DIODE-RECTIFIER;1N5819,40V,1A,DO-4
1
1
1
1
1
SA
SA
SA
SA
SA
AHR22
AHR23
AHR24
AHR25
AHR26
2007-000616
2001-000539
2001-000539
2007-000616
2001-000539
R-CHIP;24Kohm,5%,1/10W,TP,1608
R-CARBON;24KOHM,5%,1/8W,AA,TP,1.8X
R-CARBON;24KOHM,5%,1/8W,AA,TP,1.8X
R-CHIP;24Kohm,5%,1/10W,TP,1608
R-CARBON;24KOHM,5%,1/8W,AA,TP,1.8X
1
1
1
1
1
SA
SA
SA
SA
SA
AHD11
AHD2
AHE10
AHE11
AHE13
0401-000005
0407-000123
2401-000408
2401-000408
2401-000408
DIODE-SWITCHING;1N4148,75V,150mA,D
DIODE-ARRAY;DAN202K,80V,100mA,CA2C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
1
1
1
1
1
SA
SA
SA
SA
SA
AHR27
AHR28
AHR29
AHR30
AHR31
2007-000092
2007-000092
2007-000092
2007-000092
2007-000092
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;15Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHE14
AHE15
AHE17
AHE18
AHE20
2401-000408
2401-000408
2401-001502
2401-003107
2401-001249
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
C-AL;47uF,20%,16V,GP,TP,6.3x5,2.5
C-AL;47uF,20%,16V,GP,TP,5x7,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5
1
1
1
1
1
SA
SA
SA
SA
SA
AHR32
AHR33
AHR34
AHR35
AHR36
2007-000092
2007-000965
2007-000091
2007-000097
2007-000097
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;5.1Kohm,5%,1/10W,TP,1608
R-CHIP;12Kohm,5%,1/10W,TP,1608
R-CHIP;47Kohm,5%,1/10W,TP,1608
R-CHIP;47Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHE21
AHE22
AHE23
AHE27
AHE28
2401-001250
2401-001249
2401-001250
2401-001250
2401-001250
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
1
1
1
1
1
SA
SA
SA
SA
SA
AHR37
AHR38
AHR39
AHR40
AHR41
2007-000091
2007-000965
2007-000109
2007-000087
2007-000087
R-CHIP;12Kohm,5%,1/10W,TP,1608
R-CHIP;5.1Kohm,5%,1/10W,TP,1608
R-CHIP;1Mohm,5%,1/10W,TP,1608
R-CHIP;6.8Kohm,5%,1/10W,TP,1608
R-CHIP;6.8Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHE29
AHE30
AHE31
AHE32
AHE33
2401-001250
2401-001249
2401-000408
2401-000408
2401-000408
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,2.5
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
C-AL;10uF,20%,16V,GP,TP,3.5x5,2.5
1
1
1
1
1
SA
SA
SA
SA
SA
AHR42
AHR43
AHR44
AHR45
AHR46
2001-000539
2007-001164
2007-001164
2007-001164
2007-001164
R-CARBON;24KOHM,5%,1/8W,AA,TP,1.8X
R-CHIP;75ohm,1%,1/10W,TP,1608
R-CHIP;75ohm,1%,1/10W,TP,1608
R-CHIP;75ohm,1%,1/10W,TP,1608
R-CHIP;75ohm,1%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHE34
AHE35
AHE36
AHE37
AHE38
2401-000426
2401-000918
2401-000598
2401-000588
2401-000588
C-AL;10uF,20%,16V,GP,TP,3.5x5,5
C-AL;22uF,20%,16V,GP,-,6.3x7,5
C-AL;1uF,20%,50V,GP,TP,4x7,5
C-AL;1uF,20%,50V,GP,TP,3x5,2.5
C-AL;1uF,20%,50V,GP,TP,3x5,2.5
1
1
1
1
1
SA
SA
SA
SA
SA
AHR47
AHR50
AHR51
AHR52
AHR53
2007-001164
2001-000281
2001-000281
2007-000109
2007-000102
R-CHIP;75ohm,1%,1/10W,TP,1608
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
R-CHIP;1Mohm,5%,1/10W,TP,1608
R-CHIP;100Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AHE39
AHE40
AHE41
AHE42
AHE43
2401-000598
2401-001250
2401-001250
2401-001250
2401-001250
C-AL;1uF,20%,50V,GP,TP,4x7,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
1
1
1
1
1
SA
SA
SA
SA
SA
AHR54
AHR55
AHR56
AHR57
AHR9
2007-000077
2007-000070
2007-000097
2007-000097
2007-000123
R-CHIP;470ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;47Kohm,5%,1/10W,TP,1608
R-CHIP;47Kohm,5%,1/10W,TP,1608
R-CHIP;1.5Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
7-4
This Document can not be used without Samsung’s authorization
Samsung Electronics
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
AIC1
AJACK1
AJACK3
AL1
AL2
1003-001561
3722-002384
3722-002383
2703-001973
2701-000181
IC-LED DRIVER;PT6961,SOP,32P,300MI
JACK-PIN;3P,SN/NI,YEL/WHT/RED,ANGL
JACK-IEEE1394;4P/1,AU,BLK,ANGLE,IE
INDUCTOR-SMD;2.7uH,10%,1608
INDUCTOR-AXIAL;33uH,5%,2434
1
1
1
1
1
SA
SA
SA
SA
SA
AL3
AL4
AL5
AL6
AMC01
2701-000181
2703-001973
2701-000002
2701-000002
2203-005148
INDUCTOR-AXIAL;33uH,5%,2434
INDUCTOR-SMD;2.7uH,10%,1608
INDUCTOR-AXIAL;100UH,10%,4298
INDUCTOR-AXIAL;100UH,10%,4298
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AME2
AR1
AR10
AR11
AR12
2401-001502
2007-000092
2007-000092
2007-000092
2007-000616
C-AL;47uF,20%,16V,GP,TP,6.3x5,2.5
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;24Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AR13
AR14
AR16
AR17
AR2
2007-001167
2007-000616
2007-000078
2007-000119
2007-001010
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;24Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;560ohm,5%,1/10W,TP,1608
R-CHIP;51Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AR3
AR4
AR5
AR6
AR7
2001-000429
2007-000084
2001-000429
2001-000429
2007-000090
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
R-CHIP;10Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
AR8
AR9
ARM1
ASW1
ASW11
2007-000092
2007-000092
0609-001225
3404-001261
3404-001261
R-CHIP;15Kohm,5%,1/10W,TP,1608
R-CHIP;15Kohm,5%,1/10W,TP,1608
MODULE REMOCON;VERTICAL,3.6mm,TR
SWITCH-TACT;15V DC,20mA,100gf,7.4X
SWITCH-TACT;15V DC,20mA,100gf,7.4X
1
1
1
1
1
SA
SA
SA
SA
SA
ASW8
AVFD1
AZD1
AZD2
AZD3
3404-001261
AK07-00034A
0406-001172
0406-001172
0403-001083
SWITCH-TACT;15V DC,20mA,100gf,7.4X
LED DISPLAY-OVAL TYPE;BCD-9032B,DV
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-ZENER;UDZ9.1B,8.85-9.23V,200
1
1
1
1
1
SA
SA
SA
SA
SA
AZD4
AZD5
AZD6
AZD7
AZD8
0406-001172
0406-001172
0406-001172
0406-001172
0406-001172
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
1
1
1
1
1
SA
SA
SA
SA
SA
BC1
BC3
BC4
BC5
BC6
2203-000189
2203-000189
2203-000189
2203-000189
2203-005148
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;100nF,10%,16V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
BC7
BD2
BD3
BD4
BD5
2203-000189
0402-000165
0402-000127
0402-000165
0402-000165
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
DIODE-RECTIFIER;1N5819,40V,1A,DO-4
DIODE-RECTIFIER;1N4002,100V,1A,DODIODE-RECTIFIER;1N5819,40V,1A,DO-4
DIODE-RECTIFIER;1N5819,40V,1A,DO-4
1
1
1
1
1
SA
SA
SA
SA
SA
BD6
BD7
BD9
BE3
BE4
0402-000165
0403-001083
0402-000127
2401-002165
2401-002165
DIODE-RECTIFIER;1N5819,40V,1A,DO-4
DIODE-ZENER;UDZ9.1B,8.85-9.23V,200
DIODE-RECTIFIER;1N4002,100V,1A,DOC-AL;100uF,20%,16V,GP,TP,6.3x7,5
C-AL;100uF,20%,16V,GP,TP,6.3x7,5
1
1
1
1
1
SA
SA
SA
SA
SA
Samsung Electronics
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
BE5
BE6
BE7
BL1
BL4
2401-000471
2401-001250
2401-001730
2701-000002
2701-000002
C-AL;10uF,20%,50V,BP,TP,5x11,5mm
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;10UF,20%,50V,GP,TP,5X11,5
INDUCTOR-AXIAL;100UH,10%,4298
INDUCTOR-AXIAL;100UH,10%,4298
1
1
1
1
1
SA
SA
SA
SA
SA
BQ1
BR1
BR2
BR3
FC1
0501-000362
2007-000090
2007-000090
2001-000405
2203-000646
TR-SMALL SIGNAL;KSC2328A-Y,NPN,100
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CARBON;180OHM,5%,1/8W,AA,TP,1.8X
C-CER,CHIP;0.024NF,5%,50V,C0G,TP,1
1
1
1
1
1
SA
SA
SA
SA
SA
FC1S01
FC1S02
FC2
FC3
FC4
3602-000103
3602-000103
2203-000646
2203-000626
2203-000626
FUSE-CLIP;-,-,10mohm
FUSE-CLIP;-,-,10mohm
C-CER,CHIP;0.024NF,5%,50V,C0G,TP,1
C-CER,CHIP;0.022nF,5%,50V,C0G,1608
C-CER,CHIP;0.022nF,5%,50V,C0G,1608
1
1
1
1
1
SNA
SNA
SA
SA
SA
FC5
FC6
FD1
FE2
FIC1
2203-000257
2203-000257
0401-000005
2401-002259
AK09-00101A
C-CER,CHIP;10nF,10%,50V,X7R,1608
C-CER,CHIP;10nF,10%,50V,X7R,1608
DIODE-SWITCHING;1N4148,75V,150mA,D
C-AL;100000uF,+80-20%,5.5V,-,TP,12
IC MICOM;N128-C05-3BA,DVD-R130E-01
1
1
1
1
1
SA
SA
SA
SA
SNA
FIC2
FIC3
FIC4
FL261
FR1
1103-001224
1203-000515
AC14-12006C
3809-001804
2007-000078
IC-EEPROM;524L50X51,2Kx8,SOP,8P,5.
IC-VOL. DETECTOR;7042,TO-92,3P,177
IC;KA7533,DIP,FFC CABLE-FLAT;30V,80C,55mm,13P,1m
R-CHIP;1Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
FR10
FR11
FR12
FR13
FR14
2007-000090
2007-000090
2007-000090
2007-000090
2007-000100
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;68Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
FR15
FR17
FR19
FR2
FR20
2007-000102
2007-000070
2007-000070
2007-000090
2007-000090
R-CHIP;100Kohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
FR5
FR6
FR7
FR8
FR9
2007-000090
2007-000090
2007-000078
2007-000071
2007-000102
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;10Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;22ohm,5%,1/10W,TP,1608
R-CHIP;100Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
FRONTFX1
FX2
IC216
IC217
AK63-00307A
2801-003139
2801-003318
1001-001368
1201-000163
GROUND-FRONT AV;DVD-R130,SUS,T0.2,
CRYSTAL-UNIT;8MHz,50ppm,28-AAA,22p
CRYSTAL-UNIT;32.768KHz,20ppm,28-AA
IC-AV SWITCH;HA118827,-,QFP,56P,12
IC-OP AMP;4560,SOP,8P,173MIL,DUAL,
1
1
1
1
1
SA
SA
SA
SA
SA
MC1
MC2
MC3
MCN2
MCN3
2203-005148
2203-005148
2203-000998
3711-005563
3711-005563
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.047nF,5%,50V,C0G,1608
HEADER-BOARD TO BOARD;BOX,30P,2R,2
HEADER-BOARD TO BOARD;BOX,30P,2R,2
1
1
1
1
1
SA
SA
SA
SA
SA
MD1
ME5
ML1
MR2
MR4
0402-001533
2401-000249
2007-000029
2007-001167
2007-000070
DIODE-RECTIFIER;1N5408,1000V,3A,-,
C-AL;100uF,20%,10V,GP,TP,6.3x5,5
R-CHIP;0ohm,5%,1/8W,TP,2012
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
This Document can not be used without Samsung’s authorization
7-5
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
MR5
MR6
MR7
MR9
NC1
2007-000070
2007-000070
2007-001167
2007-001167
2203-000160
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
C-CER,CHIP;0.0015NF,0.25PF,50V,C0G
1
1
1
1
1
SA
SA
SA
SA
SA
PBCU3
PBCU4
PBIZ1
PDCZ1
PFCF1
2201-000446
2201-000446
0604-001028
2301-001654
2301-000129
C-CERAMIC,DISC;3.3NF,20%,400V,Y5U,
C-CERAMIC,DISC;3.3NF,20%,400V,Y5U,
PHOTO-COUPLER;TR,50-600%,250mW,DIP
C-FILM,LEAD-PEF;1000nF,5%,100V,TP,
C-FILM,LEAD-PEF;100nF,5%,50V,TP,10
1
1
1
1
1
SA
SA
SA
SA
SA
NC10
NC11
NC12
NC13
NC14
2203-000257
2203-000189
2203-000189
2203-001656
2203-000189
C-CER,CHIP;10nF,10%,50V,X7R,1608
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;0.47nF,5%,50V,NP0,1608
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
1
1
1
1
1
SA
SA
SA
SA
SA
PFCZ1
PFID1
PFRF1
PFRF2
PFRF3
2301-000402
AC14-12006D
2001-000780
2001-000221
2001-000429
C-FILM,LEAD-PEF;1nF,5%,50V,TP,5x7x
IC;KA431Z,TO-92,TAPING
R-CARBON;470OHM,5%,1/8W,AA,TP,1.8X
R-CARBON;1.2KOHM,5%,1/8W,AA,TP,1.8
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
1
1
1
1
1
SA
SA
SA
SA
SA
NC15
NC2
NC3
NC4
NC5
2203-000998
2203-000160
2203-001656
2203-000140
2203-000140
C-CER,CHIP;0.047nF,5%,50V,C0G,1608
C-CER,CHIP;0.0015NF,0.25PF,50V,C0G
C-CER,CHIP;0.47nF,5%,50V,NP0,1608
C-CER,CHIP;1.5nF,10%,50V,X7R,1608
C-CER,CHIP;1.5nF,10%,50V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
PFRF4
PFRF5
PFRF6
PFRZ1
PLCZ1
2001-000674
2004-000459
2004-000459
2001-000429
2301-000129
R-CARBON;360OHM,5%,1/8W,AA,TP,1.8X
R-METAL;2.2Kohm,1%,1/8W,AA,TP,1.8x
R-METAL;2.2Kohm,1%,1/8W,AA,TP,1.8x
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
C-FILM,LEAD-PEF;100nF,5%,50V,TP,10
1
1
1
1
1
SA
SA
SA
SA
SA
NC6
NC7
NC8
NC9
ND2
2203-001656
2203-001607
2203-000189
2203-000257
0401-000005
C-CER,CHIP;0.47nF,5%,50V,NP0,1608
C-CER,CHIP;0.22nF,5%,50V,NP0,1608
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;10nF,10%,50V,X7R,1608
DIODE-SWITCHING;1N4148,75V,150mA,D
1
1
1
1
1
SA
SA
SA
SA
SA
PLRU1
PLRZ1
PPCD1
PPCD2
PPCF1
1404-001361
2003-000105
2401-003480
2401-001479
2401-003480
THERMISTOR-NTC;3ohm,4A,-,35mW/C,-,
R-METAL OXIDE;0.33ohm,5%,2W,AD,TP,
C-AL;1000UF,20%,10V,LZ,TP,10X16MM,
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
C-AL;1000UF,20%,10V,LZ,TP,10X16MM,
1
1
1
1
1
SA
SA
SA
SA
SA
NE1
NE2
NE3
NE4
NE5
2401-000414
2401-000438
2401-000414
2401-000438
2401-000414
C-AL;10uF,20%,16V,GP,TP,4x7,5
C-AL;10uF,20%,25V,GP,-,5x11,5
C-AL;10uF,20%,16V,GP,TP,4x7,5
C-AL;10uF,20%,25V,GP,-,5x11,5
C-AL;10uF,20%,16V,GP,TP,4x7,5
1
1
1
1
1
SA
SA
SA
SA
SA
PPCF10
PPCF11
PPCF2
PPCF3
PPCF4
2401-001370
2401-003107
2401-003480
2401-001370
2401-001250
C-AL;470uF,20%,16V,GP,TP,8x11.5,5
C-AL;47uF,20%,16V,GP,TP,5x7,5
C-AL;1000UF,20%,10V,LZ,TP,10X16MM,
C-AL;470uF,20%,16V,GP,TP,8x11.5,5
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
1
1
1
1
1
SA
SA
SA
SA
SA
NE6
NE7
NIC1
NL1
NL2
2401-001020
2401-000414
1204-001765
2701-000188
2701-000188
C-AL;3.3UF,20%,50V,GP,TP,4X7,5
C-AL;10uF,20%,16V,GP,TP,4x7,5
IC-AUDIO PROCESSOR;MSP3417D(PQFP),
INDUCTOR-AXIAL;4.7uH,5%,2434
INDUCTOR-AXIAL;4.7uH,5%,2434
1
1
1
1
1
SA
SA
SA
SA
SA
PPCF5
PPCF7
PPCF8
PPCI1
PPCI2
2401-001250
2401-001370
2401-002165
2401-001126
2401-001126
C-AL;4.7uF,20%,35V,GP,TP,4x5,5
C-AL;470uF,20%,16V,GP,TP,8x11.5,5
C-AL;100uF,20%,16V,GP,TP,6.3x7,5
C-AL;330uF,20%,25V,WT,TP,10x12.5,5
C-AL;330uF,20%,25V,WT,TP,10x12.5,5
1
1
1
1
1
SA
SA
SA
SA
SA
NL3
NR1
NR10
NR11
NR2
2701-000188
2001-000429
2007-001134
2007-000113
2001-000281
INDUCTOR-AXIAL;4.7uH,5%,2434
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
R-CHIP;68ohm,5%,1/10W,TP,1608
R-CHIP;33ohm,5%,1/10W,TP,1608
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
1
1
1
1
1
SA
SA
SA
SA
SA
PPCI3
PPCI8
PPCO1
PPCO2
PPDD1
2401-001126
2401-001126
2401-000385
2401-002300
0404-001235
C-AL;330uF,20%,25V,WT,TP,10x12.5,5
C-AL;330uF,20%,25V,WT,TP,10x12.5,5
C-AL;10uF,20%,100V,GP,TP,6.3x11,5
C-AL;47uF,20%,50V,GP,TP,6.3x11,5
DIODE-SCHOTTKY;SHK65-45R,60V,3000m
1
1
1
1
1
SA
SA
SC
SA
SA
NR3
NR4
NR5
NR6
NX1
2001-000281
2007-000129
2001-000281
2001-000281
2801-004096
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
R-CHIP;27Kohm,5%,1/10W,TP,1608
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
CRYSTAL-UNIT;18.432MHZ,20PPM,28-AA
1
1
1
1
1
SA
SA
SA
SA
SA
PPDF1
PPDF2
PPDF3
PPDF5
PPDI1
0404-001235
0404-001235
0402-001533
0401-000005
0402-001624
DIODE-SCHOTTKY;SHK65-45R,60V,3000m
DIODE-SCHOTTKY;SHK65-45R,60V,3000m
DIODE-RECTIFIER;1N5408,1000V,3A,-,
DIODE-SWITCHING;1N4148,75V,150mA,D
DIODE-RECTIFIER;SF26,400V,2A,DO-15
1
1
1
1
1
SA
SA
SA
SA
SA
PACT1
PACT2
PADT1
PADT2
PADT3
2301-001792
2301-001792
0402-001111
0402-001111
0402-001111
C-FILM,LEAD;150nF,20%,275V,BK,17.5
C-FILM,LEAD;150nF,20%,275V,BK,17.5
DIODE-RECTIFIER;1N5397GP,600V,1.5A
DIODE-RECTIFIER;1N5397GP,600V,1.5A
DIODE-RECTIFIER;1N5397GP,600V,1.5A
1
1
1
1
1
SA
SA
SA
SA
SA
PPDO1
PPID1
PPIF1
PPIF2
PPII1
0402-000012
1203-001586
1203-001589
1203-001589
1203-002183
DIODE-RECTIFIER;UF4007,1KV,1A,DO-4
IC-POSI.FIXED REG.;278R33,TO-220F,
IC-POSI.FIXED REG.;278R05,TO-220F,
IC-POSI.FIXED REG.;278R05,TO-220F,
IC-SWITCH VOL. REG.;278R12,TO-220F
1
1
1
1
1
SA
SA
SA
SA
SA
PADT4
PAFT1
PALT2
PALT4
PART1
0402-001111
3601-000237
AC29-00002A
AC29-00003A
2007-008711
DIODE-RECTIFIER;1N5397GP,600V,1.5A
FUSE-CARTRIDGE;250V,2A,SLOW-BLOW,C
FILTER LINE NOISE;-,30mH,-,-,BLF-2
FILTER LINE NOISE;-,20mH MIN,-,-,R-CHIP;1MOHM,5%,1/2W,TP,5025
1
1
1
1
1
SA
SA
SA
SA
SA
PPII4
PPLD1
PPLF1
PPLI1
PPRD1
1203-002183
AC27-12001N
AH27-00039A
AC27-12001N
2003-000485
IC-SWITCH VOL. REG.;278R12,TO-220F
COIL CHOKE;10UH-15%,RA,K-30,Q80,15
COIL CHOKE;DR CHOKE(8*6),DVD-R2000
COIL CHOKE;10UH-15%,RA,K-30,Q80,15
R-METAL OXIDE(S);12KOHM,5%,1W,AA,T
1
1
1
1
1
SA
SA
SA
SA
SA
PAVV1
PAVV2
PAWT1
PBCU1
PBCU2
1405-000186
1405-001026
3711-000203
2201-002044
2201-002044
VARISTOR;470V,2500A,17.5x7.5mm,TP
VARISTOR;470V,600A,9x7mm,TP
HEADER-BOARD TO CABLE;1WALL,2P/3P,
C-CERAMIC,DISC;0.1NF,10%,400V,Y5P,
C-CERAMIC,DISC;0.1NF,10%,400V,Y5P,
1
1
1
1
1
SA
SA
SA
SA
SA
PPRF2
PPRF3
PPRF4
PPRF5
PPRF6
2001-000429
2001-000429
2001-000429
2001-000281
2001-000429
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
1
1
1
1
1
SA
SA
SA
SA
SA
7-6
This Document can not be used without Samsung’s authorization
Samsung Electronics
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
PPRF8
PPRI1
PPRO1
PPZO1
PQIZ1
2001-000429
2007-000074
2001-000062
0403-000390
1203-003883
R-CARBON;1KOHM,5%,1/8W,AA,TP,1.8X3
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CARBON;470OHM,5%,1/4W,AA,TP,2.4X
DIODE-ZENER;UZP33B,31.4-34.6V,1000
IC-PWM CONTROLLER;3B2065P-2,TO-220
1
1
1
1
1
SA
SA
SA
SA
SA
PQIZ1A
PQTZ1
PRCU1
PSCX1
PSCZ2
AH62-30122A
AC26-00014K
2401-004015
2305-001029
2201-000129
HEAT SINK-POWER;1,AL,VO,T1.3,ANODI
TRANS SWITCHING-RAM RECORDER;EER35
C-AL;220uF,?20%,450V,-,BK,30*30,10
C-FILM,LEAD-PEF;10nF,10%,630V,TP,1
C-CERAMIC,DISC;0.1nF,10%,1000V,Y5P
1
1
1
1
1
SNA
SA
SA
SA
SA
PSDZ1
PSRZ1
PSRZ2
PVCL1
PVDL1
0402-000012
2006-000273
2006-000273
2401-002608
0402-001195
DIODE-RECTIFIER;UF4007,1KV,1A,DO-4
R-CEMENT;27KOHM,5%,2W,CA,BK,6.4X6.
R-CEMENT;27KOHM,5%,2W,CA,BK,6.4X6.
C-AL;33uF,20%,35V,GP,TP,5x11,5
DIODE-RECTIFIER;F1T4,400V,1A,DO-20
1
1
1
1
1
SA
SA
SA
SA
SA
PVRL4
PVZL1
PZWZ1
SC10
SC12
2001-000793
0403-000713
3711-004379
2203-000491
2203-000491
R-CARBON;47OHM,5%,1/8W,AA,TP,1.8X3
DIODE-ZENER;MTZJ20B,18.63-17.7V,50
HEADER-BOARD TO CABLE;BOX,4P,1R,2m
C-CER,CHIP;2.2nF,10%,50V,X7R,1608
C-CER,CHIP;2.2nF,10%,50V,X7R,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SC13
SC14
SC15
SC16
SC18
2203-005148
2203-000491
2203-005148
2203-000236
2203-000236
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;2.2nF,10%,50V,X7R,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SC2
SC21
SC22
SC23
SC25
2203-005148
2203-000236
2203-005148
2203-000236
2203-000236
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;100nF,10%,16V,X7R,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SC26
SC27
SC28
SC29
SC3
2203-001607
2203-000236
2203-001607
2203-000236
2203-000236
C-CER,CHIP;0.22nF,5%,50V,NP0,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.22nF,5%,50V,NP0,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SC30
SC31
SC33
SC35
SC36
2203-001607
2203-000236
2203-000236
2203-000189
2203-000236
C-CER,CHIP;0.22nF,5%,50V,NP0,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SC37
SC38
SC5
SC6
SC7
2203-000236
2203-000236
2203-000236
2203-000236
2203-000236
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SC8
SC9
SD1
SD4
SD5
2203-000236
2203-000491
0401-000005
0407-000123
0407-000123
C-CER,CHIP;0.1nF,5%,50V,C0G,1608
C-CER,CHIP;2.2nF,10%,50V,X7R,1608
DIODE-SWITCHING;1N4148,75V,150mA,D
DIODE-ARRAY;DAN202K,80V,100mA,CA2DIODE-ARRAY;DAN202K,80V,100mA,CA2-
1
1
1
1
1
SA
SA
SA
SA
SA
SE1
SE10
SE11
SE13
SE3
2401-001479
2401-002165
2401-001479
2401-002165
2401-001479
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
C-AL;100uF,20%,16V,GP,TP,6.3x7,5
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
C-AL;100uF,20%,16V,GP,TP,6.3x7,5
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
1
1
1
1
1
SA
SA
SA
SA
SA
Samsung Electronics
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
SE4
SE6
SIC2
SJACK1
SJACK3
2401-001479
2401-001479
1204-001748
3722-002409
3707-001060
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
IC-SELECTOR;MM1503XN,SOP,6P,63MIL,
JACK-SCART;42P,SN,BLK
CONNECTOR-OPTICAL;PLUG,GP1FA550TZ,
1
1
1
1
1
SA
SA
SA
SA
SA
SJACK4
SJACK5
SL1
SL10
SL12
3722-002318
3722-002111
2701-000181
2701-000181
2701-000181
JACK-PIN;3P(7P),SN/NI,RED/BLU/GRN,
JACK-PIN;6P+1P,SN/NI,RED/WHT/YEL/B
INDUCTOR-AXIAL;33uH,5%,2434
INDUCTOR-AXIAL;33uH,5%,2434
INDUCTOR-AXIAL;33uH,5%,2434
1
1
1
1
1
SA
SA
SA
SA
SA
SL13
SL14
SL15
SL16
SL17
AC27-92001M
2701-000117
2701-000181
2701-000181
2701-000181
COIL-INDUCTOR;RH3.5X6.5RS,BEAD(RAD
INDUCTOR-AXIAL;10uH,5%,2434
INDUCTOR-AXIAL;33uH,5%,2434
INDUCTOR-AXIAL;33uH,5%,2434
INDUCTOR-AXIAL;33uH,5%,2434
1
1
1
1
1
SC
SA
SA
SA
SA
SL18
SL19
SL2
SL3
SL4
AC27-92001M
AC27-92001M
3301-001419
2701-000181
3301-001419
COIL-INDUCTOR;RH3.5X6.5RS,BEAD(RAD
COIL-INDUCTOR;RH3.5X6.5RS,BEAD(RAD
BEAD-SMD;220ohm,1608,TP,133ohm/70M
INDUCTOR-AXIAL;33uH,5%,2434
BEAD-SMD;220ohm,1608,TP,133ohm/70M
1
1
1
1
1
SC
SC
SA
SA
SA
SL5
SL6
SL7
SL8
SQ1
2701-000181
3301-001419
3301-000314
3301-000314
0501-000341
INDUCTOR-AXIAL;33uH,5%,2434
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;120ohm,1.6x0.8x0.8mm,-,-,
BEAD-SMD;120ohm,1.6x0.8x0.8mm,-,-,
TR-SMALL SIGNAL;KSC1623-L,NPN,200m
1
1
1
1
1
SA
SA
SA
SA
SA
SQ10
SQ11
SQ12
SQ2
SQ3
0501-000341
0504-000156
0504-000156
0504-000129
0504-000152
TR-SMALL SIGNAL;KSC1623-L,NPN,200m
TR-DIGITAL;KSR2103,PNP,200MW,22K/2
TR-DIGITAL;KSR2103,PNP,200MW,22K/2
TR-DIGITAL;KSR1104,NPN,200mW,47K/4
TR-DIGITAL;KSR2101,PNP,200mW,4.7K/
1
1
1
1
1
SA
SA
SA
SA
SA
SQ4
SQ5
SQ6
SQ7
SQ8
0504-000129
0504-000152
0504-000129
0501-000398
0501-000398
TR-DIGITAL;KSR1104,NPN,200mW,47K/4
TR-DIGITAL;KSR2101,PNP,200mW,4.7K/
TR-DIGITAL;KSR1104,NPN,200mW,47K/4
TR-SMALL SIGNAL;KSC945-Y,NPN,250mW
TR-SMALL SIGNAL;KSC945-Y,NPN,250mW
1
1
1
1
1
SA
SA
SA
SA
SA
SQ9
SR1
SR10
SR12
SR13
0501-000341
2007-000115
2007-000102
2001-000969
2007-000102
TR-SMALL SIGNAL;KSC1623-L,NPN,200m
R-CHIP;82ohm,5%,1/10W,TP,1608
R-CHIP;100Kohm,5%,1/10W,TP,1608
R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3
R-CHIP;100Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SR14
SR15
SR16
SR17
SR18
2007-001167
2007-000070
2007-000074
2007-000070
2007-000070
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SR19
SR20
SR21
SR23
SR24
2007-001167
2007-001167
2007-000070
2007-000070
2007-001167
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SR25
SR27
SR28
SR3
SR30
2007-000134
2007-000070
2007-001167
2007-000084
2007-000078
R-CHIP;33Kohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
This Document can not be used without Samsung’s authorization
7-7
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
SR31
SR32
SR35
SR37
SR39
2001-000969
2007-000094
2007-000267
2007-000267
2007-000070
R-CARBON;75OHM,5%,1/8W,AA,TP,1.8X3
R-CHIP;22Kohm,5%,1/10W,TP,1608
R-CHIP;1.8Kohm,5%,1/8W,TP,2012
R-CHIP;1.8Kohm,5%,1/8W,TP,2012
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SC
SC
SA
TE2
TE3
TE4
TL1
TR1
2401-001479
2401-001077
2401-001479
2701-000002
2007-000070
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
C-AL;330nF,20%,50V,GP,TP,4x7mm,5mm
C-AL;470uF,20%,10V,GP,TP,6.3*11mm,
INDUCTOR-AXIAL;100UH,10%,4298
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SR4
SR40
SR41
SR42
SR44
2007-001167
2007-001167
2007-001167
2007-001167
2007-000070
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
TR2
TR4
TR5
TR6
TTM1
2007-000074
2007-000074
2001-000281
2001-000281
AK40-00025A
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CHIP;100ohm,5%,1/10W,TP,1608
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
R-CARBON;100OHM,5%,1/8W,AA,TP,1.8X
TM BLOCK;TCSK0601PD25A,PAL B/G,I,D
1
1
1
1
1
SA
SA
SA
SA
SA
SR46
SR47
SR48
SR51
SR52
2007-000119
2007-000119
2007-000078
2007-000040
2007-000074
R-CHIP;560ohm,5%,1/10W,TP,1608
R-CHIP;560ohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;150ohm,1%,1/10W,TP,1608
R-CHIP;100ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
W004
WJ134
WJ176
WJ192
WJ193
6003-000283
2007-000070
2007-000033
2007-000033
2007-000033
SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(YEL
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/4W,TP,3216
R-CHIP;0ohm,5%,1/4W,TP,3216
R-CHIP;0ohm,5%,1/4W,TP,3216
1
1
1
1
1
SA
SA
SA
SA
SA
SR53
SR55
SR56
SR58
SR59
2007-000075
2007-000075
2007-000075
2007-000075
2007-000078
R-CHIP;220ohm,5%,1/10W,TP,1608
R-CHIP;220ohm,5%,1/10W,TP,1608
R-CHIP;220ohm,5%,1/10W,TP,1608
R-CHIP;220ohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
WJ217
WJ225
WJ230
WJ243
WJ244
2007-000070
2007-000070
2007-000033
2007-000070
2007-000070
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/4W,TP,3216
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
SR6
SR60
SR61
SR62
SR65
2007-000119
2007-000075
2007-000078
2007-000078
2007-000119
R-CHIP;560ohm,5%,1/10W,TP,1608
R-CHIP;220ohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;560ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
WJ71
WJ90
2007-000033
2007-000033
R-CHIP;0ohm,5%,1/4W,TP,3216
R-CHIP;0ohm,5%,1/4W,TP,3216
1
1
SA
SA
SR66
SR67
SR68
SR69
SR7
2007-000119
2007-000122
2007-000122
2007-000070
2007-001167
R-CHIP;560ohm,5%,1/10W,TP,1608
R-CHIP;1.2Kohm,5%,1/10W,TP,1608
R-CHIP;1.2Kohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
H001
C012
C771
CIC1
CN1
AK97-01553E
AK61-00475A
AK61-00390A
1203-003177
3708-002193
ASSY-LOADER;,-,SV-R3600,LOADER ASS
SPRING ETC;SOH-DDR,SUS,-,-,-,L6.8,
HOLDER-WIRE;SOH-DR2,PPS,T5.2,W14.1
IC-VOL. DETECTOR;BD5326G,SSOP,5P,2
CONNECTOR-FPC/FFC/PIC;50P,0.5mm,SM
1
1
1
1
1
SA
SNA
SNA
SA
SA
SR70
SR71
SR8
SR9
SZD1
2007-000070
2007-000070
2007-000070
2007-001167
0406-001172
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;75ohm,5%,1/10W,TP,1608
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
1
1
1
1
1
SA
SA
SA
SA
SA
DECK_C
H001
H103
H104
H105
3708-002176
AK97-01324A
AK66-00042A
AK97-00608A
6602-001076
CONNECTOR-FPC/FFC/PIC;5P,1mm,SMD-A
ASSY-RECORDER DECK;-,DP-RW2,GEAR-PULLEY;DP-15,POM,-,-,-,WHT,-,
ASSY-MOTOR LOAD;-,DP-15,BELT-RECTANGULAR;CR,T1.2,4.3%,1.2X
1
1
1
1
1
SA
SNA
SA
SA
SA
SZD10
SZD11
SZD12
SZD13
SZD14
0406-001172
0403-001083
0406-001172
0406-001172
0406-001172
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-ZENER;UDZ9.1B,8.85-9.23V,200
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
1
1
1
1
1
SA
SA
SA
SA
SA
H106
H107
H108
H202
H207
AK66-00041A
AK66-00071A
AK63-00276A
AK73-00038A
AK31-00028A
GEAR-TRAY;DP-15,POM,-,-,-,WHT,-,-,
SLIDER-HOUSING;DP-RW2,POM,T17,W17.
TRAY-DISC;DP-RW2,ABS,T1.5,W124,L18
RUBBER-INSULATOR;DP-R3L,Butyl,8.9*
MOTOR SPINDLE;DP-R3L,8500,9.8mN.m,
1
1
1
4
1
SA
SNA
SNA
SNA
SNA
SZD16
SZD2
SZD3
SZD4
SZD5
0403-000361
0406-001172
0406-001172
0406-001172
0406-001172
DIODE-ZENER;UZ6.2BSB,5.96-6.27V,50
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
1
1
1
1
1
SA
SA
SA
SA
SA
H209
H211
H212
H213
H241
AK64-01335A
AK97-01360A
AK61-00484A
AK97-01330A
AK41-00399A
CHASSIS-SUB;DP-RW2,ABS,T1.5,W60.9,
ASSY-PICK UP;ZN,SOH-DR3,HOLDER-CHUCK;DP-RW2,ABS,T3,W141,L9
ASSY-PCB MOTOR;ASSY,DP-RW2,ASSY
FFC-PU;DP-RW2,PITCH : 0.5,UL2896,5
1
1
1
1
1
SNA
SNA
SNA
SNA
SNA
SZD6
SZD7
SZD8
SZD9
TC1
0406-001172
0406-001172
0406-001172
0406-001172
2203-000189
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
DIODE-TVS;CDS3C30GTH,48V,0W,SMD
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
1
1
1
1
1
SA
SA
SA
SA
SA
H265
H268
H271
H275
H401
AK61-00489A
AK61-00452A
AK61-00491A
AK66-00072A
AK61-00485B
BRACKET-SHAFT PU;DP-RW2,SUS-301CSP
SPRING ETC-HINGE PU;DP-R2,SUS304WP
HINGE-PU;DP-RW2,POM KEPITAL TX-31,
SHAFT-PU;DP-RW2,SUS420J2,91.5,3,NA
FRAME-MAIN;DP-R3,ABS,ABS,-,BLK,-,W
2
1
1
2
1
SNA
SNA
SNA
SNA
SNA
TC2
TC4
TC5
TD1
TE1
2203-000189
2203-000189
2203-000998
0401-000005
2401-002300
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;0.047nF,5%,50V,C0G,1608
DIODE-SWITCHING;1N4148,75V,150mA,D
C-AL;47uF,20%,50V,GP,TP,6.3x11,5
1
1
1
1
1
SA
SA
SA
SA
SA
JP9
PC1
PC10
PC12
PC14
3708-001331
2203-006048
2402-000179
2203-006048
2203-006048
CONNECTOR-FPC/FFC/PIC;40P,0.5mm,SM
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-AL,SMD;47uF,20%,16V,GP,TP,6.6x6.
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
PC15
2404-001131
C-TA,CHIP;22UF,10%,10V,GP,TP,3528
1
SA
7-8
This Document can not be used without Samsung’s authorization
Samsung Electronics
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
PC2
PC3
PC4
PC5
2203-006214
2402-001042
2203-005061
2402-001042
C-CER,CHIP;2200nF,10%,25V,X7R,3216
C-AL,SMD;100uF,20%,16V,GP,TP,6.6x6
C-CER,CHIP;100nF,+80-20%,16V,Y5V,1
C-AL,SMD;100uF,20%,16V,GP,TP,6.6x6
1
1
1
1
SA
SA
SA
SA
PC6
PC7
PC8
PC9
PCB
2203-006048
2203-005171
2203-005171
2402-000179
AK41-00476A
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;1000nF,10%,16V,X7R,2012
C-CER,CHIP;1000nF,10%,16V,X7R,2012
C-AL,SMD;47uF,20%,16V,GP,TP,6.6x6.
PCB-FONT;RAMBO3,EPOXY,2,-,1.3T,132
1
1
1
1
0.5
SA
SA
SA
SA
SNA
PCN
PIC2
PIC3
PL1
PL3
3711-005477
1203-003997
1203-003999
2901-001281
2901-001281
HEADER-BOARD TO CABLE;BOX,4P,1R,2m
IC-MULTI REG.;BA30E00WHFP,HRP,7P,9
IC-POSI.FIXED REG.;BH25FB1WHFV,HVS
FILTER-EMI SMD;16V,2A,-,220000pF,2
FILTER-EMI SMD;16V,2A,-,220000pF,2
1
1
1
1
1
SA
SA
SA
SA
SA
PL4
PL5
PR1
PR2
RC10
2901-001281
2901-001281
2007-000097
2007-000616
2203-006048
FILTER-EMI SMD;16V,2A,-,220000pF,2
FILTER-EMI SMD;16V,2A,-,220000pF,2
R-CHIP;47Kohm,5%,1/10W,TP,1608
R-CHIP;24Kohm,5%,1/10W,TP,1608
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC13
RC14
RC15
RC16
RC17
2203-006048
2203-006048
2203-006048
2203-006048
2203-006048
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC19
RC21
RC22
RC23
RC25
2203-006048
2203-006048
2404-001020
2203-006048
2404-001020
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
1
1
1
1
1
SA
SA
SA
SA
SA
RC26
RC27
RC28
RC29
RC3
2203-006048
2404-001020
2203-000254
2203-000254
2203-006048
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC30
RC31
RC32
RC33
RC34
2203-000254
2203-006048
2203-000233
2203-000254
2203-000254
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;0.1nF,5%,50V,C0G,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC35
RC36
RC37
RC38
RC39
2203-000254
2203-006048
2404-000284
2203-000254
2404-000284
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-TA,CHIP;10uF,20%,16V,-,TP,3528
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-TA,CHIP;10uF,20%,16V,-,TP,3528
1
1
1
1
1
SA
SA
SA
SA
SA
RC40
RC41
RC42
RC43
RC44
2203-006048
2203-000254
2203-000254
2203-006048
2203-006048
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC45
RC46
RC47
RC48
RC49
2203-000438
2203-000438
2203-000627
2203-000438
2203-000438
C-CER,CHIP;1nF,10%,50V,X7R,1005
C-CER,CHIP;1nF,10%,50V,X7R,1005
C-CER,CHIP;0.022nF,5%,50V,C0G,1005
C-CER,CHIP;1nF,10%,50V,X7R,1005
C-CER,CHIP;1nF,10%,50V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
Samsung Electronics
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
RC50
RC51
RC52
RC53
RC54
2203-000254
2203-000254
2203-000254
2203-000233
2203-006048
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;0.1nF,5%,50V,C0G,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC55
RC56
RC57
RC58
RC59
2404-000284
2203-006048
2203-006048
2404-000284
2203-006048
C-TA,CHIP;10uF,20%,16V,-,TP,3528
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-TA,CHIP;10uF,20%,16V,-,TP,3528
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC6
RC60
RC61
RC62
RC63
2203-005496
2203-006048
2203-006048
2203-005642
2203-005642
C-CER,CHIP;220nF,+80-20%,10V,Y5V,1
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;0.22nF,5%,50V,NP0,1005
C-CER,CHIP;0.22nF,5%,50V,NP0,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC64
RC65
RC66
RC67
RC68
2203-005642
2203-005642
2203-000254
2203-000254
2203-000254
C-CER,CHIP;0.22nF,5%,50V,NP0,1005
C-CER,CHIP;0.22nF,5%,50V,NP0,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC69
RC7
RC70
RC71
RC72
2203-000233
2203-005496
2203-001239
2203-001239
2203-000254
C-CER,CHIP;0.1nF,5%,50V,C0G,1005
C-CER,CHIP;220nF,+80-20%,10V,Y5V,1
C-CER,CHIP;0.082nF,5%,50V,NP0,1005
C-CER,CHIP;0.082nF,5%,50V,NP0,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RC73
RC74
RIC2
RR10
RR11
2203-006048
2203-000489
AK13-00028A
2007-000151
2007-000143
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;2.2nF,10%,50V,X7R,1005
IC ASIC;S1L1101X01,-,128,5V,-0 ~ +
R-CHIP;15Kohm,5%,1/16W,TP,1005
R-CHIP;4.7Kohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SNA
SA
SA
RR13
RR16
RR17
RR18
RR21
2007-000171
2007-000159
2007-003009
2007-000157
2007-007107
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;56Kohm,5%,1/16W,TP,1005
R-CHIP;16Kohm,5%,1/16W,TP,1005
R-CHIP;47Kohm,5%,1/16W,TP,1005
R-CHIP;100Kohm,1%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RR22
RR24
RR25
RR26
RR27
2007-007107
2007-000145
2007-000154
2007-001320
2007-000148
R-CHIP;100Kohm,1%,1/16W,TP,1005
R-CHIP;6.2Kohm,5%,1/16W,TP,1005
R-CHIP;24KOHM,5%,1/16W,TP,1005
R-CHIP;1.8Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RR28
RR29
RR30
RR32
RR33
2007-000148
2007-000148
2007-000157
2007-000159
2007-000154
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;47Kohm,5%,1/16W,TP,1005
R-CHIP;56Kohm,5%,1/16W,TP,1005
R-CHIP;24KOHM,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RR35
RR37
RR40
RR41
RR43
2007-000140
2007-000170
2007-000171
2007-000171
2007-000171
R-CHIP;1Kohm,5%,1/16W,TP,1005
R-CHIP;1Mohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
RR44
RR45
RR46
S.N.A
S.N.A
2007-000151
2007-000151
2007-000171
AK92-00876A
AH31-00025A
R-CHIP;15Kohm,5%,1/16W,TP,1005
R-CHIP;15Kohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
ASSY PCB-F/END;SV-R3600,F/END ASSY
MOTOR-LOADING;RF-300EA-1D390,DP-7,
1
1
1
1
1
SA
SA
SA
SNA
SNA
This Document can not be used without Samsung’s authorization
7-9
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
AK66-00006A
0201-000169
0201-001411
0201-001525
0201-001819
PULLEY MOTOR;DP-9,POM ,-,BLK,-,-,ADHESIVE-CYA;ARCN-A501F,NTR
ADHESIVE-UV;8833,YEL,50000,250G/1B
ADHESIVE-UV;8840L,YEL,TRANS,23000,
ADHESIVE-UV;8833M,YELLOW,21000mPas
1
0.01
0.01
0.05
0.08
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
0202-001214
AK97-01362A
0201-001553
0201-001718
0202-001214
SOLDER-WIRE FLUX;HI-ALMIT HR19M LF
ASSY-SUB PICK UP;ZN,SOH-DR3,ADHESIVE-TP;G-800-A,GRY,220?40Pa.S
ADHESIVE-A.C.F;A-80T,SILVER,11000SOLDER-WIRE FLUX;HI-ALMIT HR19M LF
0.2 SNA
1 SNA
0.013 SNA
0.003 SNA
0.5 SNA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
AK97-01358A
2007-000070
2007-000076
2007-000078
2007-000309
ASSY-FPCB;-,SOH-DR2.5,RAMBO2.5 FPC
R-CHIP;0ohm,5%,1/10W,TP,1608
R-CHIP;330ohm,5%,1/10W,TP,1608
R-CHIP;1Kohm,5%,1/10W,TP,1608
R-CHIP;10ohm,5%,1/10W,TP,1608
1
1
1
1
1
SNA
SA
SA
SA
SA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
2007-000869
2007-000929
2203-000189
2203-000626
2203-005664
R-CHIP;4.7Kohm,1%,1/10W,TP,1608
R-CHIP;470ohm,1%,1/10W,TP,1608
C-CER,CHIP;100nF,+80-20%,25V,Y5V,1
C-CER,CHIP;0.022nF,5%,50V,C0G,1608
C-CER,CHIP;4700nF,10%,6.3V,X5R,201
1
1
8
1
1
SA
SA
SA
SA
SA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
1003-001854
2011-001261
2011-001344
2104-001087
3301-001419
IC-DIODE DRIVER;EL6939CLZ,LPP,32P,
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
R-NET;100ohm,5%,1/16W,L,CHIP,8P,TP
VR-SMD;2.2Kohm,25%,0.15W,TOP
BEAD-SMD;220ohm,1608,TP,133ohm/70M
1
1
1
2
1
SA
SA
SA
SA
SA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
AK41-00422A
0201-000172
0202-001221
0603-001181
0603-001187
FPC-FPCB-MAIN;SOH-DR2.5,00,POLYAMI
ADHESIVE-AA;EP-171,BRN
SOLDER-CREAM;PF305-116HO(A),-,25~4
PHOTO DIODE;5.5V,658.79nm,PHOTO-RECEIVER;6.0V,17.0mA,650nm,M
1
0.01
0.12
1
1
SNA
SNA
SNA
SA
SNA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
1404-001328
3708-002193
AK32-00004A
AK61-00548A
AK67-00053A
THERMISTOR-NTC;10Kohm,-,3370K,-,-,
CONNECTOR-FPC/FFC/PIC;50P,0.5mm,SM
SENSOR PHOTO;CNB1001,-25~85,-,-,20
PLATE-PD;SOH-DR3.5,Zn,T1.3,-,L11.5
LENS-CDL;SOH-DR3,ZEONEX,CLEAR,4.2X
1
1
1
1
1
SNA
SA
SNA
SNA
SNA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
AK97-01361A
0201-001411
0201-001525
0201-001709
0201-001819
ASSY-OPT;ZN,SOH-DR3,ADHESIVE-UV;8833,YEL,50000,250G/1B
ADHESIVE-UV;8840L,YEL,TRANS,23000,
ADHESIVE-UV;8839L,YEL,24500mPa.s,ADHESIVE-UV;8833M,YELLOW,21000mPas
1
0.04
0.01
0.02
0.03
SNA
SNA
SNA
SNA
SNA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
0602-001127
0602-001128
AH61-00812A
AK61-00470A
AK61-00472A
DIODE-LASER;160mW,2,658nm,CAN
DIODE-LASER;8.5mW,2,785nm,CAN
SPRING ETC-L/G HOLDER;SOH-DH2,PBR,
HOLDER-LD CD;SOH-DDR,Zn,-,W6.8,L6.
HOLDER-LD DVD;SOH-DDR,Zn,T3.14,W7.
1
1
1
1
1
SNA
SNA
SNA
SNA
SNA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
AK61-00473A
AK61-00546A
AK61-00547A
AK63-00264A
AK67-00012A
HOLDER-LG;SOH-DDR,Zn,T5.7,W7.2,L10
BASE-PU;SOH-DR3.5,ZnDC,T14.1,W36.3
HOLDER-DVD GT;SOH-DR3.5,Zn,-,T5,L3
COVER-BASE;SOH-DDR,CU,T0.3,W31.3,L
LENS-DR1 CL;SHO-DR1,PLASTIC,NTR,•’
1
1
1
1
1
SNA
SNA
SNA
SNA
SNA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
AK67-00033A
AK67-00034A
AK67-00035A
AK67-00036A
AK67-00038A
LENS-PLATE;SOH-DR3,GLS,WHT,8.0*4.0
LENS-PBS;SOH-DR3,GLS,WHT,8.7*4.0,2
LENS-MR;SOH-DR3,GLS,WHT,5.0*4.0,2.
LENS-DVD GT;SOH-DR3,GLS,WHT,2.5*3.
LENS-CBS;SOH-DR3,GLS,WHT,3.0*3.0,3
1
1
1
1
1
SNA
SNA
SNA
SNA
SNA
7-10
SNA
SNA
SNA
SNA
SNA
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
AK67-00041A
AK67-00052A
AK97-01377A
0201-001081
0201-001230
LENS-CD GT;SOH-DR2.5,GLS,WHT,2.0*1
LENS-ASL;DR3/BDP,APEL/Z340R,WHT,4P
ASSY-ACT;-,SOH-DR3,ADHESIVE-AA;1401C,RED,-,BOND-LOCK
ADHESIVE-CYA;LOCTITE 480,BLK,300,-
1 SNA
1 SNA
1 SNA
0.006 SNA
0.002 SNA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
0201-001421
0201-001709
0201-001793
0202-001214
3302-001651
ADHESIVE-UV;SDM-118,TRP,5500,250G/
ADHESIVE-UV;8839L,YEL,24500mPa.s,ADHESIVE-UV;8791L3,WHITE,20000mPa.
SOLDER-WIRE FLUX;HI-ALMIT HR19M LF
MAGNET-RARE EARTH;AF,14000Gauss,47
0.04 SNA
0.01 SNA
0.004 SNA
0.085 SNA
2 SNA
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
3812-001263
3812-001419
AK62-00020A
AK67-00037A
AK67-00040A
WIRE-NO SHEATH CU;SCW,-,19MM,-,-,W
WIRE-NO SHEATH CU;SCW,0V,18.5mm,1/
YOKE-ACT;SOH-DR3,SPCC,T7.6,W24.8,L
LENS-QWP;SOH-DR3,GLS,WHT,4.5*4.5,1
LENS-OL;SOH-DR3,PLS,WHT,3.8,1.7,-,
5
1
1
1
1
S.N.A
S.N.A
S.N.A
S.N.A
S.N.A
AK97-01376A
0201-001253
0201-001371
0202-001215
AK61-00480A
ASSY-BLADE;-,SOH-DR3,ADHESIVE-STR;TB2212B,BLK,25(250),T
ADHESIVE-SIL;KE3494,GRAY,50 PA,OL
SOLDER-BAR;HSE-16,S60S-20,D3,SN/0.
BLADE-ACT;SOH-DR3,E5006J\L,IVORY,1
1 SNA
0.008 SNA
0.001 SNA
0.01 SNA
1 SNA
SPIN_C
STEP_C
U8
U9
UB1
3708-002067
3708-002018
AK13-00025A
1107-001369
1105-001397
CONNECTOR-FPC/FFC/PIC;12P,1mm,SMDCONNECTOR-FPC/FFC/PIC;4P,1MM,SMD-A
IC ASIC;S5L1484A01,RAMBO-3,256,3.3
IC-FLASH MEMORY;29LV800,8Mbit,1Mx8
IC-DRAM;K4S641632,-,64Mbit,1Mx16x4
1
1
1
1
1
SA
SA
SNA
SNA
SA
UC19
UC21
UC22
UC23
UC24
2203-000386
2203-006048
2203-006048
2203-006048
2203-006048
C-CER,CHIP;0.015nF,5%,50V,C0G,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UC25
UC26
UC27
UC28
UC29
2203-006048
2203-006048
2203-006048
2404-001020
2404-001020
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
1
1
1
1
1
SA
SA
SA
SA
SA
UC30
UC31
UC32
UC33
UC34
2404-001020
2203-006048
2203-006048
2203-006048
2203-006048
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UC35
UC36
UC37
UC38
UC39
2203-006048
2203-006048
2203-006048
2203-006048
2203-006048
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UC40
UC41
UC42
UC43
UC44
2203-006048
2203-006048
2203-006048
2203-006048
2203-006048
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UC45
UC46
UC47
UC48
UC49
2203-000438
2203-006048
2203-000254
2203-006048
2203-006048
C-CER,CHIP;1nF,10%,50V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
This Document can not be used without Samsung’s authorization
SNA
SNA
SNA
SNA
SNA
Samsung Electronics
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
UC50
UC51
UC52
UC53
UC54
2203-006048
2203-006048
2203-006048
2203-006048
2203-006048
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR49
UR5
UR55
UR58
UR59
2007-000143
2011-001261
2007-000143
2007-000143
2007-000143
R-CHIP;4.7Kohm,5%,1/16W,TP,1005
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
R-CHIP;4.7Kohm,5%,1/16W,TP,1005
R-CHIP;4.7Kohm,5%,1/16W,TP,1005
R-CHIP;4.7Kohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UC55
UC56
UC57
UC62
UC63
2203-006048
2203-001071
2203-005438
2203-006048
2203-006048
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;0.056nF,5%,50V,C0G,1608
C-CER,CHIP;0.15nF,10%,50V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR6
UR63
UR64
UR69
UR7
2007-000173
2007-000084
2007-000143
2007-000148
2007-001217
R-CHIP;22ohm,5%,1/16W,TP,1005
R-CHIP;4.7Kohm,5%,1/10W,TP,1608
R-CHIP;4.7Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;82OHM,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UC64
UC65
UC67
UC69
UC70
2203-006048
2203-006048
2203-006048
2404-001020
2203-006048
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR73
UR75
UR76
UR77
UR8
3301-001419
2007-000113
2007-000070
3301-001419
2007-001217
BEAD-SMD;220ohm,1608,TP,133ohm/70M
R-CHIP;33ohm,5%,1/10W,TP,1608
R-CHIP;0ohm,5%,1/10W,TP,1608
BEAD-SMD;220ohm,1608,TP,133ohm/70M
R-CHIP;82OHM,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UC71
UC72
UC75
UC76
UC77
2404-001020
2203-006048
2404-001020
2203-006048
2203-006048
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR80
UR81
UR87
UR88
UR89
2007-000140
2007-000171
2007-000148
3301-001419
2007-000171
R-CHIP;1Kohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
BEAD-SMD;220ohm,1608,TP,133ohm/70M
R-CHIP;0ohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UC79
UC80
UC81
UR1
UR10
2203-006048
2203-000438
2203-006048
2011-001432
2007-001217
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;1nF,10%,50V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
R-NET;82ohm,5%,1/16W,L,CHIP,8P,TP,
R-CHIP;82OHM,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR9
UR90
UR91
UR92
UR93
2007-000173
2007-000831
2007-000171
2007-000171
2007-000171
R-CHIP;22ohm,5%,1/16W,TP,1005
R-CHIP;39Kohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR11
UR12
UR13
UR14
UR16
2007-000173
2007-000173
2007-001217
2007-001217
2007-000170
R-CHIP;22ohm,5%,1/16W,TP,1005
R-CHIP;22ohm,5%,1/16W,TP,1005
R-CHIP;82OHM,5%,1/16W,TP,1005
R-CHIP;82OHM,5%,1/16W,TP,1005
R-CHIP;1Mohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR97
UR98
VC1
VC10
VC11
2007-000171
2007-000148
2203-006047
2203-000438
2203-005061
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
C-CER,CHIP;33nF,10%,16V,X7R,1005
C-CER,CHIP;1nF,10%,50V,X7R,1005
C-CER,CHIP;100nF,+80-20%,16V,Y5V,1
1
1
1
1
1
SA
SA
SA
SA
SA
UR17
UR2
UR20
UR21
UR22
2007-000143
2011-001261
2007-000148
2007-000148
2007-000148
R-CHIP;4.7Kohm,5%,1/16W,TP,1005
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
VC12
VC13
VC14
VC15
VC16
2203-005061
2404-000284
2203-006048
2203-000254
2203-005061
C-CER,CHIP;100nF,+80-20%,16V,Y5V,1
C-TA,CHIP;10uF,20%,16V,-,TP,3528
C-CER,CHIP;100nF,10%,10V,X7R,1005
C-CER,CHIP;10nF,10%,16V,X7R,1005
C-CER,CHIP;100nF,+80-20%,16V,Y5V,1
1
1
1
1
1
SA
SA
SA
SA
SA
UR23
UR24
UR25
UR26
UR27
2007-000174
2007-000148
2007-001292
2007-001292
2007-000148
R-CHIP;47ohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;33ohm,5%,1/16W,TP,1005
R-CHIP;33ohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
VC17
VC18
VC19
VC2
VC20
2203-005061
2203-005061
2203-005061
2203-006047
2203-006048
C-CER,CHIP;100nF,+80-20%,16V,Y5V,1
C-CER,CHIP;100nF,+80-20%,16V,Y5V,1
C-CER,CHIP;100nF,+80-20%,16V,Y5V,1
C-CER,CHIP;33nF,10%,16V,X7R,1005
C-CER,CHIP;100nF,10%,10V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR28
UR29
UR3
UR32
UR36
2007-000148
2007-000148
2011-001261
2007-000171
2007-000171
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
VC21
VC3
VC4
VC5
VC6
2404-001020
2203-006047
2203-006047
2203-006047
2203-006047
C-TA,CHIP;10uF,20%,10V,GP,TP,3216
C-CER,CHIP;33nF,10%,16V,X7R,1005
C-CER,CHIP;33nF,10%,16V,X7R,1005
C-CER,CHIP;33nF,10%,16V,X7R,1005
C-CER,CHIP;33nF,10%,16V,X7R,1005
1
1
1
1
1
SA
SA
SA
SA
SA
UR37
UR39
UR4
UR40
UR41
2007-001325
2007-000775
2011-001261
2007-000171
2007-000171
R-CHIP;3.3Kohm,5%,1/16W,TP,1005
R-CHIP;33KOHM,5%,1/16W,TP,1005
R-NET;33ohm,5%,1/16W,L,CHIP,8P,TP,
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
VIC1
VR1
VR10
VR11
VR12
1003-001881
2007-000138
2007-000138
2007-000034
2007-000034
IC-MOTOR DRIVER;BD7956FS,HSSOP,54P
R-CHIP;100ohm,5%,1/16W,TP,1005
R-CHIP;100ohm,5%,1/16W,TP,1005
R-CHIP;1OHM,5%,1/4W,TP,3216
R-CHIP;1OHM,5%,1/4W,TP,3216
1
1
1
1
1
SA
SA
SA
SA
SA
UR42
UR43
UR44
UR47
UR48
2007-007001
2007-000148
2007-000171
2007-000148
2007-000148
R-CHIP;3.9KOHM,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;0ohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
VR13
VR14
VR16
VR18
VR20
2007-000034
2007-000034
2007-000034
2007-000034
2007-000148
R-CHIP;1OHM,5%,1/4W,TP,3216
R-CHIP;1OHM,5%,1/4W,TP,3216
R-CHIP;1OHM,5%,1/4W,TP,3216
R-CHIP;1OHM,5%,1/4W,TP,3216
R-CHIP;10Kohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
Samsung Electronics
This Document can not be used without Samsung’s authorization
7-11
Electrical Parts List
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
Loc.No Part No
Description ; Specification
Q’ty S.N.A Remark
VR25
VR26
VR27
VR28
VR31
2007-007107
2007-000159
2007-000159
2007-000148
3301-001419
R-CHIP;100Kohm,1%,1/16W,TP,1005
R-CHIP;56Kohm,5%,1/16W,TP,1005
R-CHIP;56Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
BEAD-SMD;220ohm,1608,TP,133ohm/70M
1
1
1
1
1
SA
SA
SA
SA
SA
A001
CT01
CT02
CT03
LDT01
AK59-00055B
2401-002144
2203-000192
2203-000192
0601-000519
REMOCON-ASSY;DVD-R130/XEG,SEC,197.
C-AL;47uF,20%,16V,GP,TP,5x11,5
C-CER,CHIP;100nF,+80-20%,50V,Y5V,2
C-CER,CHIP;100nF,+80-20%,50V,Y5V,2
LED-IR;ROUND,5mm,170mW,4V,940nm,TP
1
1
1
1
1
SA
SA
SA
SA
SA
VR32
VR33
VR34
VR35
VR36
3301-001419
3301-001419
3301-001419
3301-001419
3301-001419
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
1
1
1
1
1
SA
SA
SA
SA
SA
OP8
QT1
RT01
RT02
RT03
2007-000029
0501-000534
2007-000881
2007-000593
2007-000102
R-CHIP;0ohm,5%,1/8W,TP,2012
TR-SMALL SIGNAL;2SC2412K,NPN,200mW
R-CHIP;4.7ohm,5%,1/8W,TP,2012
R-CHIP;22ohm,5%,1/8W,TP,2012
R-CHIP;100Kohm,5%,1/10W,TP,1608
1
1
1
1
1
SA
SA
SA
SA
SA
VR37
VR38
VR39
VR40
VR41
3301-001419
3301-001419
3301-001419
3301-001419
3301-001419
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
1
1
1
1
1
SA
SA
SA
SA
SA
XT01
2802-001094
RESONATOR-CERAMIC;4.0MHz,0.5%,TP,8
1
SA
VR42
VR43
VR5
VR6
VR8
3301-001419
3301-001419
2007-000148
2007-000148
2007-000148
BEAD-SMD;220ohm,1608,TP,133ohm/70M
BEAD-SMD;220ohm,1608,TP,133ohm/70M
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
R-CHIP;10Kohm,5%,1/16W,TP,1005
1
1
1
1
1
SA
SA
SA
SA
SA
C- A/V
C001
C002
C011
C015
AC39-42001R
AK97-01447K
AK64-01432A
AK61-00519A
AK64-01375A
CABLE-A/V;PVC,-,-,3P,-,-,ASSY-CABINET FRONT;HIPS 94 HB,DVDDOOR-TRAY;DVD-R130,ABS 94HB,T2,H15
SPRING ETC-DOOR;DVD-SR420,STS304WP
CABINET-TOP;DVD-R110,PCM,T0.6,W430
1
1
1
1
1
SA
SA
SA
SA
SA
VR9
W012
W018
W274
W291
2007-000164
6002-001086
6003-001450
6001-001730
6001-001291
R-CHIP;150KOHM,5%,1/16W,TP,1005
SCREW-TAPPING;PH,+,B,M1.7,L5.0,ZPC
SCREW-TAPTITE;PH,+,S,M2.6,L5,ZPC(Y
SCREW-MACHINE;BH,+,-,M1.7,L2.5,ZPC
SCREW-MACHINE;CH(0.5),*,-,M1.7,L4,
1
1
2
2
3
SA
SA
SA
SA
SA
C657
CABLE
FL620
I/B
P025
AK64-01433C
AC39-00017A
3809-001793
AK68-01003P
AC39-10019A
DOOR-JACK;DVD-R130/XEF,ABS 94HB,T2
CABLE-ETC-RF(PAL);-,MALE/FEMALE,12
FFC CABLE-FLAT;30V,80C,90mm,40P,0.
MANUAL USERS;DVD-R130,XEV,RUS,UKR,
CBF-POWER CORD;KKP-419C,H03VVH2-F,
1
1
1
1
1
SA
SA
SA
SA
SA
W350
W352
W353
W354
W355
6001-001003
6001-000883
6003-001199
6003-001258
6003-001526
SCREW-MACHINE;BH,+,M2.6,L6,ZPC(BLK
SCREW-MACHINE;PH,+,M1.4,L5,ZPC(BLK
SCREW-TAPTITE;PWH,+,B,M2,L7,ZPC(YE
SCREW-TAPTITE;PH,+,B,M1.4,L2.0,NI
SCREW-TAPTITE;CH,+,S-TITE,M1.4,L4,
4
1
4
4
2
SA
SNA
SA
SA
SNA
PACK
VS106
W001
W009
W200
AK69-00381L
AK39-00089A
6003-000275
6003-000276
6003-001375
PACKING CASE;DVD-R130/XEV,SW-2,A-1
LEAD CONNECTOR;DVD-R130E,LEAD CONN
SCREW-TAPTITE;BH,+,-,B,M3,L10,ZPC(
SCREW-TAPTITE;BH,+,-,B,M3,L10,ZPC(
SCREW-TAPTITE;BH,+,B,M3,L8,ZPC(YEL
1
1
2
8
2
SA
SA
SA
SA
SA
Y1
2802-001163
AC99-40324W
AC99-50326B
0202-001221
AC99-80325R
RESONATOR-CERAMIC;33.86MHz,0.5%,TP
ASSY PCB-F/END,c;SV-R3600,F/END AS
ASSY PCB-F/END,t;SV-R3600,F/END AS
SOLDER-CREAM;PF305-116HO(A),-,25~4
ASSY PCB-F/END,mrp;SV-R3600,F/END
1
1
1
4.04
1
SA
SNA
SNA
SNA
SNA
W268
W272
W272
W275
6003-000254
6003-001464
6003-001464
6003-001561
SCREW-TAPTITE;BH,+,-,S,M3,L6,ZPC(W
SCREW-TAPTITE;BH,+,B,M3,L10,ZPC(WH
SCREW-TAPTITE;BH,+,B,M3,L10,ZPC(WH
SCREW-TAPTITE;BH,+,-,B,M3,L6,ZPC(Y
1
1
5
5
SA
SA
SA
SA
AC99-90326Z
0202-001214
AK68-00433A
AK97-01325A
3403-001026
ASSY PCB-F/END,m;SV-R3600,F/END AS
SOLDER-WIRE FLUX;HI-ALMIT HR19M LF
LABEL WARNING-DRIVE;DP-R1,-,ART PA
ASSY-HOUSING;-,DP-RW2,ASSY
SWITCH-PUSH;5V,0.7mA,DPST,OFF-ON-O
1 SNA
0.167 SNA
1 SNA
1 SNA
1 SA
AK41-00397A
AK41-00400A
AK97-01327A
AK31-00024A
AK61-00488A
PCB-DECK;DP-RW2,PHENOL,1,00,T1.6,2
FFC-DECK;DP-RW2,PITCH1.0,PET,5P,-,
ASSY-P U DECK;ASSY,DP-RW2,DP-RW2
MOTOR STEP-FEED;-,DP-RW,727 mA,200
BRACKET-DECK;DP-RW2,SECC US COATIN
1
1
1
1
1
SNA
SNA
SNA
SNA
SNA
AK61-00490A
AC99-40324X
AC99-80325S
AC99-90327A
AK97-01328A
SPRING ETC-SHAFT PU;DP-RW2,PW2,0.8
ASSY-FPCB,c;-,SOH-DR2.5,RAMBO2.5 F
ASSY-FPCB,mrp;-,SOH-DR2.5,RAMBO2.5
ASSY-FPCB,m;-,SOH-DR2.5,RAMBO2.5 F
ASSY-HOLDER CHUCK;ASSY,DP-RW2,DP-R
2
1
1
1
1
SNA
SNA
SNA
SNA
SNA
AK97-01331A
AK61-00486A
AK61-00487A
BG33-30001D
ASSY-CLAMPER;POM+MAGNET,DP-RW2,ASS
BODY CLAMPER-UPPER;DP-RW2,POM,T0.7
BRACKET-CLAMPER;DP-RW2,SECC,T0.6,1
MAGNET-CLAMPER;-,-,-,-,13.5x6x1.1
1
1
1
1
SNA
SNA
SNA
SNA
7-12
This Document can not be used without Samsung’s authorization
Samsung Electronics
8. Block Diagrams
8-1 All Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-2
8-2 AIC1(PCM1753) Audio DA Block Diagram - - - - - - - - - - - - - - - - - - - - - - - -
8-3
8-3 System Block Diagram- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-4
8-4 TIC1(TW9909) Video Decoder Block Diagram - - - - - - - - - - - - - - - - - - - - -
8-5
8-5 Internal Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-6
8-6 HA118827F-E Block Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8-7
Samsung Electronics
This Document can not be used without Samsung’s authorization.
8-1
Block Diagrams
8-1 All Block Diagram
FLASH
DIC3(MAIN)
DRAM 16M
DIC2
LOADER
ATAPI
MSP3417D
NIC1
RF R/L
RF IN
RF OUT
RF CVBS
SCART AV1(TV)
CODEC
DIC1(MAIN)
S5L3210
FRONT
MICOM
FIC1
TM1(JACK)
TM BLOCK
Y
Pb COMPONENT
OUT
FRONT
PCB
AV
SWITCH
HA118827
(JACK)
IEEE1394
TIC1(MAIN)
Pr
Y/C
S-VIDEO
CVBS
KEY
INPUT
REMOCON
1394 JACK
AUDIO DAC
AIC1
PCM1753
L
R
L
R
VIDEO
DECODER
(TW9909)
SCART AV2(EXT)
COAXIAL
OPTICAL
8-2
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Block Diagrams
8-2 AIC1(PCM1753) Audio DA Block Diagram
4 /8
Oversampling
Digital Filter
with
Function
Controller
(FMT) ML
(TEST)
Samsung Electronics
VCOM
Output Amp and
Low-pass Filter
DAC
VOUTR
System Clock
System Clock
Manager
Zero Detect
ZEROL/NA
(NA)
SCK
VOUTL
Power Supply
This Document can not be used without Samsung’s authorization.
AGND
(DEMP) MD
Serial
Control
Port
Enhanced
Multi-level
Delta-Sigma
Modulator
VCC
(MUTE) MC
Output Amp and
Low-pass Filter
DAC
DGND
DATA
Audio
Serial
Port
ZEROR/ZEROA
(ZEROA)
BCK
LRCK
8-3
Block Diagrams
8-3 System Block Diagram
CS
SIN
SCLK
Serial to
parallel
converter
8-bit latch
+
command
decoder
RST
Data output
buffer
Output control
Horizontal
character
size register
Vertical
character
size register
Horizontal
display
position
register
Vertical
display
position
register
Blinking and
reverse
video control
register
Horizontal
size counter
Vertical size
counter
Horizontal
dot counter
Vertical dot
counter
Blinking and
reverse video
control circuit
Horizontal
display position
detector
Vertical display
position
detector
Character
control
counter
Line control
counter
RAM write
address
counter
Display
control
register
SCL
SDA
CPOUT
AFC
circuit
Data
slicer
circuit
Decoder
Display RAM
VCOIN
VCOR
Sync
discrimination
SYNCJDG
OSCIN
OSCOUT
SEPC
SEPOUT
Font ROM
Character
output dot
clock
generator
Timing generator
SYNIN
Decoder
Sync
separator
data
separator
circuit
VDD1, VDD2, VDD3
Sync signal generator
Character output control
Background control
Video output control
Shift register
Composite
sync signal
separation
control
CTRL1
(CHABLK)
XtalIN
XtalOUT
(MUTE)
CVCR
CDLR
CVIN
CVOUT
VSS1, VSS2, VSS3
8-4
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Block Diagrams
8-4 TIC1(TW9909) Video Decoder Block Diagram
RIN (0)
RIN (1)
GIN (0)
Constrast
Saturation
B rightness
Tint
Color Matrix
Filter
10- bit ADCs
Clamp
Anti-alias Filter
BIN (1)
FB (0)
FB(1)
MUX s
GIN (1)
BIN (0)
Cr
Cb
Y
SOFT
MIXER
FB
V
CIN (0)
CIN (1)
Luma/
Chroma
processor
Chroma
Demodulation
Anti-alias
Filter
MUX
Clam
10 -bit
ADC
Filte
H/V Down
Scaler/
Cropping
U
Y
YB OUT
MUX0
Anti-alias
Filter
MUX
AGC/
Cla
10 -bit
ADC
Filter
VD(19:0)
4-H adaptive
comb filter
Y/C separation
MPOUT
Sync
27 Mhz
Clock
VBI Pass
through
Line-lock
clock
Generator
VSYNC
HSYNC
FIELD
DVALID
CLKX2
CLKX1
PDN
VBI Slicer
VBI FIFO
SIAD0
SCLK
SDAT
Video output Interface
MUX3
2 Wi re
Serial
Bus
INTREQ
AMXCLK
AMCLK
ASCLK
ALRCLK
Samsung Electronics
This Document can not be used without Samsung’s authorization.
8-5
8-6
This Document can not be used without Samsung’s authorization.
SERIAL
INTERFACE1
SERIAL
INTERFACE2
SERIAL
INTERFACE3
SI2/BUSY
SO2
SCK2
STRB
SDA
SCL
ANALOG UNIT
&
A/D
CONVERTER
SUPER TIMER
UNIT
INTERRUPT
CONTROL
SI1
SO1
SCK1
AN10-AN11
VREFC
REEL0IN
REEL1IN
CSYNCIN
DFGIN
DPGIN
CFGIN
CFGAMPO
CFGCPIN
CTLOUT1
CTLOUT2
CTLIN
RECCTL+
RECCTLCTLDLY
DFGMON
DPGMON
CPGMON
CTLMON
AVDD1, AVDD2
AVSS1, AVSS2
AVREF
PTO10, PTO11
PTO00-PTO02
PWMO-PWM5
INTPO-INTP3
NMI
RAM
ROM
78K/IV
16-BIT CPU CORE
(RAM: 512 bytes)
P30-P37
PORT3
P100-P103
P110-P113
PORT11
P90-P96
PORT9
PORT10
P80, P82-P87
P70-P77
PORT7
PORT8
P60-P67
P50-P57
PORT6
PORT5
P40-P47
P20-P23
PORT2
PORT4
PO0-P07
P80, P82, P83
PO0-P07
KEYO-KEY4
BUZ
CLO
PORT0
REAL-TIME
OUTPUT PORT
KEY INPUT
BUZZER OUTPUT
CLOCK OUTPUT
SYSTEM
CONTROL
VDD
VSS
X1
X2
XT1
XT2
RESET
Block Diagrams
8-5 Internal Block Diagram
Samsung Electronics
Block Diagrams
8-6 HA118827F-E Block Diagram
DVD OUT
TO DVD
Encoder
from
Decoder
TO Hifi
SW 9V
VCC
ALL
To DVD
Encorder
YorV
SW 5V
VCC
ALL
SW 75DriveVCC
(23,24,25)
From Decoder
Y
C
Pb(Cb)/B
75Drive
GND
(23,24,25)
Pr(Cr)/R
Audio out2-R
(AV2)
PY(Y)/G
Audio out2-L
(AV2)
75DriveGND
(19,21)
PY(Y)/G
Audio out1-R
(AV1)
Pr(Cr)/R
Audio out2-L
(AV1)
Pb(Cb)/B
SYNCSEP-OUT
SEP
Y-OUT
Audio GND
Always75DriveVCC
(15,17,19,21)
TU-R
SEP
C-OUT
AV4-R
Clock
AV1-R
AV1 OUT
AV2-R
data
AV3-R
or
Hifi-R
AV2 OUT
9V/2Vcc
Samsung Electronics
TU-R
AV4-L
AV1-L
AV2-L
AV3-L
or
Hifi-L
75Drive
GND
(15,17)
Main
GND
VCR
orAV3
input
Note: 75Ωdrive can be driven only by one system
When it is driving two systeme necessary
Please add driver to external.
AV2
ALWAYS5V
(Heavy Line block
powersupply)
AV1
This Document can not be used without Samsung’s authorization.
TU
Futoshi line route(AV1 --> AV2AV2 --> AV1),
It operates at the Stanby Mode time.
(30,34,36Pinpower OFF)
8-7
Block Diagrams
MEMO
8-8
This Document can not be used without Samsung’s authorization.
Samsung Electronics
9. Wiring Diagram
Samsung Electronics
9-1
Wiring Diagram
MEMO
9-2
Samsung Electronics
10. PCB Diagrams
10-1 Main PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10-2
10-2 Jack PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10-4
10-3 Key PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10-6
Samsung Electronics
10-1
PCB Diagrams
10-1 Main PCB
COMPONENT SIDE
RIC1
AIC1
DIC1
DIC2
DIC3
RIC2
10-2
Samsung Electronics
PCB Diagrams
CONDUCTOR SIDE
DIC5
VIC1
TIC1
DIC6
Samsung Electronics
10-3
PCB Diagrams
10-2 Jack PCB
COMPONENT SIDE
10-4
Samsung Electronics
PCB Diagrams
CONDUCTOR SIDE
NIC1
IC216
OIC2
FIC1
AIC1
Samsung Electronics
10-5
PCB Diagrams
10-3 Key PCB
COMPONENT SIDE
CONDUCTOR SIDE
10-6
Samsung Electronics
11 Schematic Diagrams
Note
11-1 S.M.P.S. (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-2 A2 / NICAM (Jack PCB)- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11-3 Connection (Jcak PCB)
11-3
11-4
----------------------------------
11-5
11-4 Front AV (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-6
11-5 I/O (Jack PCB)- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-7
11-6 I/O Switching (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-8
11-7 LED Driver (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-9
11-8 Power (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-10
11-9 System Control (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-11
11-10 TM (Jack PCB)- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-12
11-11 VPS_PDC (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-13
11-12 DVD AV Codec (Main PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-14
11-13 DVD Audio In/Out (Main PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-15
11-14 DVD DDR (Main PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-16
11-15 DVD Main Connector (Main PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-17
11-16 DVD Video Deocder (Main PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-18
11-17 IEEE 1394 (Main PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-19
11-18 Key (Key PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11-20
Samsung Electronics
For schematic Diagram
- Resistors are in ohms, 1/8W unless otherwise noted.
Special note :
Most semiconductor devices are electrostatically sensitive and therefore require the special handling techniques described under the
“electrostatically sensitive (ES) devices” section of this service manual.
Note :
Do not use the part number shown on this drawing for ordering. The correct part number is shown in the parts list (may be slightly
different or amended since this drawing was prepared).
Important safety notices :
Components identified with the mark
Use only the same type.
This Document can not be used without Samsung’s authorization.
have the special characteristics for safety. When replacing any of these components.
11-1
Schematic Diagrams
◆ Block Identification of Main PCB
Memory /
Interface
AV Block
I/O Block
A2/NICAM
Block
AV
Block
MPEG Encoding
& Decoding
System
Control
VPS/PDC
OSD Block
TM
Block
Power
Block
- Jack PCB
- Main PCB
11-2
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-1 S.M.P.S. (Jack PCB)
Power
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11-3
Schematic Diagrams
11-2 A2 / NICAM (Jack PCB)
Power
11-4
Audio
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-3 Connection (Jcak PCB)
Power
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11-5
Schematic Diagrams
11-4 Front AV (Jack PCB)
Power
11-6
Video
Audio
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-5 I/O (Jack PCB)
Power
Samsung Electronics
Video
Audio
This Document can not be used without Samsung’s authorization.
11-7
Schematic Diagrams
11-6 I/O Switching (Jack PCB)
Power
11-8
Video
Audio
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-7 LED Driver (Jack PCB)
Power
Samsung Electronics
Video
Audio
This Document can not be used without Samsung’s authorization.
11-9
Schematic Diagrams
11-8 Power (Jack PCB)
11-10
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-9 System Control (Jack PCB)
Power
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11-11
Schematic Diagrams
11-10 TM (Jack PCB)
Power
11-12
Video
Audio
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-11 VPS_PDC (Jack PCB)
Power
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11-13
Schematic Diagrams
11-12 DVD AV Codec (Main PCB)
11-14
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-13 DVD Audio In/Out (Main PCB)
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11-15
Schematic Diagrams
11-14 DVD DDR (Main PCB)
Power
11-16
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-15 DVD Main Connector (Main PCB)
Power
Samsung Electronics
Video
Audio
This Document can not be used without Samsung’s authorization.
11-17
Schematic Diagrams
11-16 DVD Video Deocder (Main PCB)
Power
11-18
Video
This Document can not be used without Samsung’s authorization.
Samsung Electronics
Schematic Diagrams
11-17 IEEE 1394 (Main PCB)
Power
Samsung Electronics
This Document can not be used without Samsung’s authorization.
11-19
Schematic Diagrams
11-18 Key (Key PCB)
Power
11-20
This Document can not be used without Samsung’s authorization.
Samsung Electronics
12. Operating Instructions
Getting Started
Front Panel (DVD-R130)
1. STANDBY/ON
Turns the DVD Recorder on and off.
2. AV3 IN
Connect external equipment.
3. DV-IN
Connects extermal digital equipment with a DV
jack. (such as a camcorder)
4. DISC TRAY
Opens to accept a disc.
5. OPEN/CLOSE
Opens and closes the disc tray.
6. DISPLAY
Displays the playing status, title/chapter/time, etc.
7. SEARCH/SKIP
Go to the next title/chapter/track or go back to the
previous title/chapter/track.
8. PLAY/PAUSE
Plays a disc or pauses playback/recording.
9. P.SCAN
Selects the progressive scan mode.
10. PROG (
)
Select TV preset Channels.
Same as PROG button on the remote control.
11. REC
Starts recording.
12. STOP
Stops disc playback.
Front Panel (DVD-R131)
1. STANDBY/ON
Turns the DVD Recorder on and off.
2. AV3 IN
Connect external equipment.
3. DV-IN
Connects extermal digital equipment with a DV
jack. (such as a camcorder)
4. DISC TRAY
Opens to accept a disc.
5. OPEN/CLOSE
Opens and closes the disc tray.
6. DISPLAY
Displays the playing status, title/chapter/time, etc.
7. SEARCH/SKIP
Go to the next title/chapter/track or go back to the
previous title/chapter/track.
8. PLAY/PAUSE
Plays a disc or pauses playback/recording.
9. P.SCAN
Selects the progressive scan mode.
10. PROG (
)
Select TV preset Channels.
Same as PROG button on the remote control.
11. REC
Starts recording.
12. STOP
Stops disc playback.
14- English
Samsung Electronics
12-1
Operating Instructions
Front Panel Display
Getting Started
1. Lights when a disc is loaded.
2. Lights in the record mode.
3. Lights to indicate the timer record mode.
4. Lights when a DVD-R/-RW disc is loaded.
5. Playing time/clock/current status indicator.
6. Lights in the progressive scan mode.
Rear Panel
1.
In from aerial connector
2.
Out to TV connector
3. AV2(EXT) INPUT SCART Connector
4. AV1(TV) OUTPUT SCART Connector
5. DIGITAL AUDIO OUT(OPTICAL)
Connects to an amplifier having a digital optical
audio input jack.
6. DIGITAL AUDIO OUT(COAXIAL)
Connects to an amplifier having a digital coaxial
audio input jack.
7. AUDIO OUT
Connects to the audio input of external equipment
using audio cables.
8. VIDEO OUT
Connects the input of external equipment using a
Video cable.
9. S-VIDEO OUT
Connects the input of external equipment using an
S-Video cable.
10. COMPONENT VIDEO OUT
Connects to equipment having Component video
output.
■
NOTE
The Antenna connection does not pass
output signal of DVD. To watch a DVD on
your TV, you must connect audio/video
cables.
English - 15
12-2
Samsung Electronics
Operating Instructions
Getting Started
Tour of the Remote Control
26
27
28
29
1
16
17
2
3
4
5
6
7
8
18
19
20
9
10
21
11
12
13
14
15
22
23
24
25
13. ANYKEY Button
Use this to view the status of the disc that is being
played.
14. REC Button
Use to make a recording on DVD-RW/-R discs.
15. REC MODE Button
This will display the recording status.(XP/SP/LP/EP)
16. REPEAT Button
Allows you to repeat a title, chapter, track or disc.
17. OPEN/CLOSE Button
To open and close the disc tray.
18. SUBTITLE Button
Press this to switch the DVD’s subtitle language.
19. PLAY/PAUSE Button
Press to play a disc or pause playback/recording.
20. PROG Buttons
Select preset channels in a specific order.
Same as PROG buttons in front panel.
21. RETURN Button
Returns to a previous menu.
22. PLAY LIST/TITLE MENU Button
Use this to return to the Title menu, or to view the
recorded files list.
23. CANCEL Button
24. MARKER/TIMER Button
Use this to bookmark a position while playing a
disc.
Press to directly enter the Timer Recording Mode
menu while stopping a disc.
25. INFO Button
This will display current settings or disc status.
26. TV Button
Press this to operate TV.
27. DVD Button
Press this when you use a DVD recorder.
28. INPUT SEL. Button
Select line input signal in external input mode
[PROG, AV input or DV INPUT(DVD-R130, R131 only)]
29. ZOOM Button
Press this to enlarge the screen.
1.
2.
3.
4.
STANDBY/ON Button
0~9(Number) Buttons
TV/DVD Button
Reverse/Forward Skip Buttons
Press to skip a disc backwards or forwards.
5. Reverse/Forward Step Buttons
Press to play frame by frame.
6. Reverse/Forward Search Buttons
Press to search a disc backwards or forwards.
7. STOP Button
Press to stop a disc.
8. VOL Buttons
Volume adjustments.
9. AUDIO/TV MUTE Button
Use this to access various audio functions on a
disc.(DVD mode)
This operates as Sound Mute. (TV mode)
10. MENU Button
Brings up the DVD recorder’s setup menu.
11. OK/DIRECTION (›‚¥Š) Buttons
12. TITLE LIST/DISC MENU Button
Use this to enter the View Recording list/Disc menu.
16- English
Samsung Electronics
12-3
Operating Instructions
Quick Overview
This section involves various methods of
connecting the DVD Recorder to other external
components and required initial setting modes.
A Quick Overview presented in this guide will give you
enough information to start using the DVD Recorder.
Connecting & Setting Up
Connecting
& Setting Up
Connecting the DVD Recoder
†
Additional connections
†
Other type of connecting the
Video output cable
†
Other type of connecting the Audio
output cable
†
Connecting to AV3 IN, DV input jack
(DVD-R130, R131 only)
Quick Overview.................................................17
Connecting the DVD Recorder........................18
Additional connections .....................................18
Other type of connecting
the Video output cable......................................19
Other type of connecting
the Audio output cable......................................21
Connecting to AV3 IN, DV input jack
(DVD-R130, R131 only)...................................23
English - 17
12-4
Samsung Electronics
Operating Instructions
Connecting the DVD
Recorder
Connecting & Setting Up
You can connect your DVD Recorder to the television
using the SCART cable if the appropriate input is
available on the television.
Additional connections
You can connect your DVD Recorder to a satellite or
digital tuner.
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1
socket on the rear of the DVD Recorder.
3. Plug the other end into the appropriate connector on
the television.
4. Plug in the DVD Recorder and TV
external device
(VCR/Satellite receiver)
5.Turn on the DVD Recorder and TV.
6. Press the INPUT SEL. button on your TV remote
control until the Video signal from the DVD Recorder
appears on the TV screen.
To RF IN
- DVD mode
1. Connect the AV2 connector of DVD Recorder and
VCR/Satellite receiver or digital tuner using a SCART
cable.
To RF OUT
2. Connect the AV1 connector to the SCART AV
connector on TV.
RF Cable
To ANT INPUT
3. Turn on the DVD Recorder, VCR/Satellite receiver or
digital tuner and TV.
4. Set Input mode on AV2.
- TV mode
■
NOTE
■
The RF cable connection of this DVD
Recorder sends only signals of TV.
You must connect SCART cable or
Audio/Video cables to watch a signal from
your DVD Recorder.
TV mode
Press the TV/DVD button on remote
control, then “TV” appear on Front LED
display (or turn off DVD Recorder).
1. Press the TV/DVD button on remote control,then
“TV” appear on Front LED display. (or turn off DVD
Recorder.)
2. You can watch programmes from a satellite or digital
tuner connected to this DVD Recorder, even when
the DVD Recorder is turned off.
18- English
Samsung Electronics
12-5
Operating Instructions
Other type of connecting
the Video output cable
There are several ways to output video signal not using
scart cables. Select one of the following video
connecting that best suits you below.
1. Connect a video(yellow) cable between the VIDEO
(yellow) OUT jack on DVD Recorder and VIDEO
(yellow) INPUT jack on your TV (or AV amplifier).
● You will enjoy regular quality images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 21-22)
S-Video, Component video and Progressive
Output Modes
●
●
yellow
Video/Audio Cable
●
S-Video and Component video output are available
only if your TV supports S-Video input or Component
video input, respectively. If S-Video or Component
video output does not work, check the TV
connections and the TV input selection settings.
Compared to standard interlaced video, progressive
scan doubles the amount of video lines fed to your
TV, resulting in a more stable, flicker-free, clear
image than interlaced video.
This is only available with TVs that support
progressive scan.
Progressive Scan Output (576p)
Consumers should note that not all high definition
television sets are fully compatible with this DVD
Recorder and may cause artifacts to be displayed in
the picture, in case of 576 progressive scan picture
problems, It is recommended that the user switch the
connection to the ‘standard definition’ output. If there
are questions regarding our TV set compatibility with
this model 576p DVD Recorder, please contact our
customer service centre.
Connecting & Setting Up
Case 1 : Connecting to a Video (Composite) output
jack
● Case 2 : Connecting to an S-Video output jack
● Case 3 : Component Video output jacks
●
Case 1 : Connecting to a Video
(Composite) output jack
yellow
English -19
12-6
Samsung Electronics
Operating Instructions
Case 2 : Connecting to an
S-Video output jack
Connecting & Setting Up
1. Connect an S-Video cable (not included) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO
INPUT jack on your TV (or AV amplifier).
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on DVD Recorder and AUDIO IN
jacks on TV (or AV amplifier).
● You will enjoy high quality images.
Case 3 : Component Video
output jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,PB,PR) jacks on
DVD Recorder and COMPONENT IN(Y,PB,PR) jacks
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 21-22).
3. After connecting, refer to the page 34 to 35.
● You will enjoy high quality and accurate colour
reproduction images.
green
blue
red
green
blue
red
■
Make sure that the colour coded
connections match. The Y, PB, PR
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
■
Progressive setting is only available when
the Video Out is set to Component.
(See page 34)
NOTE
20- English
Samsung Electronics
12-7
Operating Instructions
Other type of connecting
the Audio output cable
Case 2 : Connecting to a stereo
amplifier with AV output jacks
If your stereo amplifier only has AUDIO INPUT
jacks(L and R), use the AUDIO OUT jacks.
Connecting & Setting Up
There are several ways to output audio signal not using
scart cables. Select the audio connection that best suits
you below.
Case 1 : Connecting to your TV
Case 2 : Connecting to a stereo amplifier with AV
output jacks
● Case 3 : Connecting to an AV amplifier with a
digital output jack
●
●
Manufactured under licence from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
red
white
red
white
“DTS” and “DTS Digital Out” are trademarks of
DTS, Inc.
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Front(R)
speaker
yellow
white
red
yellow
Front(L)
speaker
white
red
English -21
12-8
Samsung Electronics
Operating Instructions
Case 3: Connecting to an AV
amplifier with a digital
output jack
Connecting & Setting Up
If your AV amplifier has a Dolby Digital, MPEG2 or
DTS decoder and a digital input jack, use this
connection. To enjoy Dolby Digital, MPEG2 or DTS
sound, you will need to set up the audio settings.
(See pages 32-33)
or
Rear(L)
Rear(R)
Front(L)
Front(R)
Subwoofer
Centre
22- English
Samsung Electronics
12-9
Operating Instructions
Quick Recording Setting
the …† buttons to select On, then
press the OK or √ button.
5 Press
If this function is set to on, both the DVD Recorder and
the TV will power on at the same time, which enables
you to immediiatedly record a desired channel.
1
DivX(R) Registration
With the DVD Recorder in Stop mode/No
Disc mode, press the MENU button.
DVD-Recorder
Programme
No Disc
Programme
Scheduled Record List
√
System Setup
Setup
MOVE
OK
RETURN
EXIT
the …† buttons to select Setup, then
2 Press
press the OK or √ button.
DVD-Recorder
Setup
No Disc
Programme
System
√
Setup
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
MOVE
OK
RETURN
EXIT
the …† buttons to select System,
3 Press
then press the OK or √ button.
System menu will be displayed.
DVD-Recorder
System
Setting up the Audio
Options
You can connect the DVD Recorder to an external amp
or Home Theatre.
Allow you to setup the Audio device and sound status
depending on the audio system in use.
1
With the DVD Recorder in Stop mode/No
Disc mode, press the MENU button.
DVD-Recorder
Programme
No Disc
No Disc
Programme
Programme
EP Mode Time
: 6 Hours
√
Setup
Chapter Creator
: Off
√
Quick Recording : Off
√
MOVE
Please use the Registration code to register this DVD
Recorder with the DivX(R) Video On Demand format.
For more information, visit www.divx.com/vod
OK
RETURN
EXIT
the …† buttons to select Quick
Recording, then press the OK or √ button.
4 Press
DVD-Recorder
System
Scheduled Record List
√
Setup
MOVE
OK
RETURN
EXIT
Press the …† buttons to select Setup, then
2 press
the OK or √ button.
DVD-Recorder
Setup
No Disc
No Disc
Programme
EP Mode Time
: 6 Hours
√
Programme
System
√
Setup
Chapter Creator
: Off
√
Setup
Clock Set
√
Quick Recording : Off
Off
√
Language
√
Audio
√
Video
√
Parental Control
√
On
Install
MOVE
OK
RETURN
EXIT
MOVE
OK
√
RETURN
EXIT
32- English
12-10
Samsung Electronics
Operating Instructions
Press the …† buttons to select Audio, then
the OK or √ button.
3 press
Audio setup menu will be displayed.
DVD-Recorder
Audio
No Disc
Programme
Digital Output
: PCM
√
Setup
DTS
: Off
√
Dynamic Compression : On
√
NICAM
√
MOVE
OK
: On
RETURN
DTS
1. Off : Doesn’t output DTS signal.
Select this when your AV receiver or AV
amplifier does not have DTS decoder.
2. On : Outputs DTS Bitstream via digital output when you
play DTS track.
Select this only when your AV receiver (or AV
amplifier) have DTS decoder.
■
EXIT
NOTE
Press the …† buttons to select the desired
audio option, then press the OK or √
4 button.
DVD-Recorder
Audio
No Disc
: PCM
√
Setup
: Bitstream
Off
√
MOVE
DTS
Dynamic Compression : On
√
NICAM
√
OK
: On
RETURN
EXIT
the …† buttons to select the desired
5 Press
item, then press the OK or √ button.
■
NOTE
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
Audio Options
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
1. Off : You can enjoy the movie with the standard
Dynamic Range.
2. On : When Movie soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
System Setup
Programme Digital Output
When DTS soundtrack is played, sound
does not output from AV Audio Output.
NICAM
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast and
you can select the desired sound by setting NICAM on
or off.
1. On : NICAM mode
2. Off : Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
Digital Output
1. PCM :
Select this when you have no equipment that
can decode Dolby Digital (or MPEG-2) signal.
When you play Dolby Digital (or MPEG-2)
sound track, the digital output are converted to
PCM Stereo.
2. Bitstream : Output Dolby Digital (or MPEG-2) audio as
bitstream. Select this when your AV
receiver or AV amplifier have Dolby Digital
(or MPEG-2) Decoder.
■
Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always outputted as
PCM. It has no relation with Digital Output
setting.
■
Be sure to select the correct Digital
Output or you will hear no sound or loud
noise.
NOTE
English -33
Samsung Electronics
12-11
Operating Instructions
MEMO
12-12
Samsung Electronics
13. Circuit Operating Descriptions
13-1 Power
13-1-1 About S.M.P.S (ringing choke converter methol)
Vout
Transformer
(Np)
(Ns)
+
+
(Vp)
(Vs)
–
–
Vreg
REGULATOR
+
+
Vin
Switch
ON/OFF Control
+
Vs switch
–
I switch
Fig. 13-1
◆Terms
1) 1st : Common power input to 1st winding.
2) 2nd : Circuit followings output winding of transformer.
3) f (Frequency) : Switching frequency (T : Switching cycle)
4) Duty : (Ton/T) x 100
13-1-2 Circuit description [FLY-Back RCC(Ringing Choke Converter)] Control
(a) AC Power Rectification/Smoothing Terminal
1) PADT1 : Convert AC power to DC (Wave rectification).
2) PRCU1 : Smooth the voltage converted to DC.
3) PALT1, PALT2, PACT1, PACT2 : Noise removal at power input/output.
4) PLRU1 : Rush current limit resistance at the momemt of power cord insertion.
· Without PLRU1, the bridge diode might be damaged as the rush current increases.
(b) SNUBBER Circuit : PSRZ1, PSRZ2, PSCX1, PSCZ2, PSDZ1
Samsung Electronics
13-1
Circuit Operating Descriptions
1) Prevent residual high voltage at the terminals of
switch during switch off/Suppress noise.
High inverted power occurs at switch off,
because of the 1st winding of transformer :
(V=-L1 xdi/dt. L1 : Leakage Induction)
A very high residual voltage exist on both terminals
of PQQX1 because dt is a very short.
Vswitch
Inverted power
by leakage
inductance
dt
0
t
Toff
2) SNUBBER circuit protects PQQX1 from damage
through leakage voltage suppression by RC,
(Charges the leakage voltage to PSDZ1 and PSCX1
and discharges to PSRZ1, PSRZ2).
3) PPCF2 : For noise removal
Fig. 13-2
(c) PQIZ1 Vcc circuit
1) PVRL1, PVRL2, PVRL3 : PQIZ1 driving resistance (PQIZ1 works through driving resistance at power cord in)
2) PQIZ1 Vcc : PVRL4, PVDL1, PVCL1
! Use the output of transformer as Vcc,because the current starts to flow into transformer while PQIZ1 is
active
@ Rectify to PVDL1 and smooth to PVCL1.
# Use the output of transformer as PQIZ1 Vcc : The loads are different before and after PQIZ1 driving.
(Vcc of PQIZ1 decreases below OFF voltage , using only the resistance dut to lode increase after PQIZ1
driving.)
(d) Feedback Control Circuit
3.3V
PPDD2
3
Fig. 13-3
13-2
Samsung Electronics
Circuit Operating Descriptions
1) F/B terminal of PQIZ1 determines output duty cyle.
2) C-E (Collector-Emitter) of PQIZ1 and F/B potential of PQIZ1 are same.
13-1-3 Internal Block Diagram (Internal Block Diagram of S.M.P.S. Circuit)
3.3V Rectified
Smoothing Circuit
Smoothing
Circuit
Noise
Removal
(SNUBBER)
Converter
Rectified Circuit
Line Filter
PWM Control
Circuit
(ICE2BSO1)
5V Rectified
Smoothing Circuit
5V Rectified
VoltageCircuit (x3)
12V Rectified
Smoothing Circuit
12V Rectified
VoltageCircuit(X3)
O
U
T
P
U
T
3.3V Rectified
Smoothing Circuit
Voltage
Detection
Circuit
Power IN
(110V)
Fig. 13-4
Samsung Electronics
13-3
Circuit Operating Descriptions
13-2 AV Codec
DVD
MULTI DRIVE
(SERVO)
ATAPI
IEL-P58
U23,U24
M13S128168A
(DDR SDRAM)
32bit
SDRAM I/F
LOAXIAL
OPTILAL
Audio output block
AUDIO OUT
(Digital,Ainalog)
I2S
AIC1
PCM1742KE
(AUDIO D/A)
HOST I/F
VIDEO OUT
DIC3
AM29DL323GB
(Flash Memory)
IEEE 1934
(DV input) block
PIC1
TSB41AB1
(1394 PHY)
Audio input
block
AIC9
PCM1802
(AUDIO A/D)
Video input
block
TIC1
TW9906
(VIDEO DEC)
I2S
ITU-R656
Video output
block
DIC1
DMN8602
(A/V CODEC)
16bit
8bit
Y,Pb,Pr, Y/C, CVBS
DV I/F
AUDIO IN
VIDEO IN
Front Panel I/F
IC601
MN101DF10G
(Front MICOM)
Fig. 13-5
· Main system control
· A/V Encoding/Decoding
· Transcoding/rating
· IEEE 1394 link layer function
13-4
· ATAPI interface with DVD-Multi Drive
· Analog Progressive/interlaced video output
Samsung Electronics
Circuit Operating Descriptions
13-2-1 DIC1 Processor Internal Architecture Diagram
SPARC Processor Core
Data
I - Cache
Memory/
Cache
Audio DSP
Host
And
And
Memory
Graphics
SPARC Processor Core
Data
I - Cache
Memory/
Cache
Audio DSP
Host
And
And
Memory
Graphics
SDRAM
32
1X10 YUV
Video
Interface
Motion
Estimator
and memory
Video DSP
and memory
Memory/
Cpntroller
64
2Port
Audio
Interface
Host
Interface
4Port
SPDIF
Bitstream/
Storage
Inter face
1394
Link
Interface
Serial I/O
DENC
16/32
Fig. 13-6
13-2-2 A/V Processor (DIC1) Functional description
1) SPARC Processors
Two 32-bit SPARC processors, one dedicated to video processing and the other assigned general system tasks
and audio processing, perform three classes of functions: system processing, audio processing, and high-level
control flow and decision-making tasks for video processing. Optionally, they can also perform 2D graphics
and host functions.
The DMN8602 also support multiple video inputs, windowed video ad graphics with arbitrarily relocatable
and resizable windows, letterbox, and side-by-side display of SD sources.
2) Host Interface
The host communication functions include initializing the DMN-8602 device, downloading software to the
local SDRAM, sending commands, monitoring status, and downloading graphics data such as OSD bitmap.
Samsung Electronics
13-5
Circuit Operating Descriptions
3) Bitstream/Storage interface
◆ ATAPI Controller
ATAPI is an asynchronous, 120ns, 16-bit word interface commonly used to connect devices such as hard
disks, CD/DVD ROMs, and DVD RAMs. All operations are initiated by reading/writing a set of ATAPI
device registers through programmed input/output(PIO) data transfer. ATAPI has DMA commands for
transferring long data. The ATAPI register address is defined by the output pins CS0, CS1, DA[2:0].
◆ The IEEE1394 interface can receive MPEG-2 transport stream or DV stream data contained in isochronous
packets (IPs). The DMN-8602 device filters the packets by matching channel IDs. In the case of MPEG-2
transport streams, the DMN-8602 device performs descrambling on the data that is scrambled with 5C
encryption. Software is responsible for transport section processing and demultiplexing.
4) Video Interface
◆ Video Input channel
The video input channel captures ITU-R BT.656-compliant 10-bit digital YUV component video stream from
Video decoder chip(TIC1)
◆ Video Digital Encoder (DENC)
The NTSC/PAL digital video encoder (DENC) module converts a digital video data stream into NTSC or
PAL composite or component video output.
The DMN-8602 DENC output can be in one of the following formats:
•Baseband composite NTSC (M) or PAL (B,D,G,H,I) analog video.
•Separate analog luma(Y) and chroma(C) output to support S-Video.
•Separate analog component video RGB or SMPTE YPbPr output.
5) Audio Interface
The serial audio input port receives uncompressed 16- to 24-bit serial digital audio data from external audio
ADC(AIC9). An internally generated clock provides bit serial clocking of the data coming from external ADC
The serial audio output port sends uncompressed 16- to 24-bit serial digital audio data to external audio
DAC(AIC1). An internally generated clock provides bit serial clocking of the data coming from external ADC
6) Serial I/O interface
◆ SPI interface
The SPI(Serial Peripheral Interface) port provides a bus for a serial interface with front panel micom(FIC1)
◆ IDC interface
The IDC bus is a simple, two-wire, bidirectional communication bus. The two signals, clock and data, are com
mon to every device connected to the bus.
In this system, IDC bus is connected to EEPROM(DIC8) and Video Decoder(TIC1)
13-6
Samsung Electronics
Circuit Operating Descriptions
13-3 SERVO (DVP Multi Drive)
1) Pick-Up
Data in the disc is processed from the optical pick-up unit (OPU). OPU includes the Elantec chip (EL6912c)
which is a highly integrated laser diode driver designed to support multi-standard writable optical drives. This
chip also has an IV amplifier with concurrent read and write sampling. The architecture allows reprogramming
of the timers to support different media DVD or CD standards, and different speed.
2) A-Chip
A chip is RF processor. This module performs RF signal processing which includes RFIP, RFIN, AGC, RF equal
izer. This processor is able to detect tracking error, focus error and various signals such as CE, PE, SBAD,
DEFECT, BCA, MIRROR, Wobble, TZC, RC, and RECD.
3) C-Chip
C-Chip is composed of DP1, PRML and WS.
First, the Data processor1 (DP1) performs EFM/EFM+ Demodulation and data is stored in the buffer
memory in data processor2 (DP2). DVD data in this buffer is transferred to CSS/ATAPI through
error-correction code
(ECC), descramble process and error detection code (EDC).
Second, WS performs the following processes.
! Delay compensation using Shift register
@ Sample/Hold pulse generation
# I/V Gain Control
$ Providing clock for RF chip
% OPC Control signal generation
Lastly, PRML completes the adaptive EQ/VD and Digital PLL.
4) D-Chip
D-Chip consists of Servo DSP, DP2 and 1Mbit memory. Servo DSP is dealing with controlling the servo-mecha
nism in DVD recorder. Servo-DSP has the following features.
! Bulit-in 10Bit ADC(8ch), DAC(3ch) and PWM(7ch)
@ Step Motor Control Logic: Macro/Micro Step
# Track Counter: long distance velocity control direct seek
$ Shock/Defect detection
% Header (DVD-RAM)/Land Pre-Pit (DVD-R/RW) Detection
^ Several Servo Monitor Signal Detection
& RF IC Interface
* Micom Interface
( Digital Servo Control of focus, tracking, sled and seek
) Disc Auto-Detection
1 Automatic Adjustment of the offset, balance and gain of Focus and Tracking Signal
2 Direct Seek with Velocity Control
3 Step Motor Control: Macro Seek
4 De-Track and Lens Shift Detection and Compensation
5 Center Error Control
6 DVD Layer Jump
7 Tilt Detect and Compensation
DP2 performs High Speed ECC and CD DA Decoder.
Samsung Electronics
13-7
Circuit Operating Descriptions
5) ATAPI Controller
ATAPI (ATA Packet Interface) the standard interface protocol used to connect the CD/DVD Drive to IDE inter
face. Data from the front-end is processed to back-end through this ATAPI protocol. Sanyo chip (LC98600CTXB0) is utilized for ATAPI interface. LC98600CT-XB0 has the following features.
! ECC and EDC correction/addition for CD-ROM data
@ Subcode decoding/encoding
# Spindle servo control
$ CLV/CAV servo control using ATIP data
% ATIP decoding and CRC check functions
^ Providing random EFM output for PCA use
& High-accuracy write strategy signal output enabled (CD-R 52x)
* Buffer RAM can be accessed by the microcontroller through the LC98600CT-XB0
( Built-in ATA-PI(IDE) interface (supports Ultra DMA modes 0,1, and 2)
) 52x decoding speed/52x encoding speed supported with 33.8688Mhz
1 Maximum transfer speed PIO mode: 16.6 MB/s (with IORDY), Ultra-DMA: 66MB/s (with DMARQ)
2 User can freely set the CD main channel, C2 flag, and subcode areas in buffer RAM
3 Built-in batch transfer function for transferring (CD main channel, C2 flag, etc., in a single operation)
4 Built-in multi-transfer function (allows multiple blocks to be sent to the host automatically in a single
operation)
A.chip (RIC1)
FPD,PD,I/V amp
RF Signal
(AGC/EQ)
C.chip (CIC1)
D.chip (DIC1)
PRML
SERVO
Processor
HOST
Servo Error
(FE/TE/CE/PE
SBAD/RC/TILT)
ENDEC
Pick up
Miscellaneous
Signal
(DFT/LPP
/WOBBLE)
LD,LD Driver
ECC
Processor
Focus Actuator
ATAPI chip
(ZIC1)
Tracking Actuator
APC & OPC
WRITE
STRATEGY
TILT Actuator
Sled
Motor
Spindle
Motor
Tray
Motor
Motor
Driver
MICOM (MIC1)
Deck
Fig. 13-7
13-8
Samsung Electronics
Circuit Operating Descriptions
13-4 Video In/out Block
DVD-R130 has the two single CVBS Video input(AV3) and two Scart input from AV1 or AV2.
AV3 Video input is CVBS at the at the Front Panel. AV2 Scart has CVBS & RGB input and CVBS output, AV1
Scart is vice versa at the Rear Panel.
The analog Video signal is selected by the IC201(BU4051 Mux). It is controlled by FIC1 (Front Micom).
TIC1 (Video Decoder) diverges from the 14.318185MHz crystal, then generates ITU-R656 (10bits) and 27MHz
clock.
TIC1 (Video Decoder) does closed caption, copy guard detect processing and A/D conversion of analog Video
signal converted into 11bit Digital Video signal (ITU-R656 Format) is outputted via DIC1 (MPEG2 Decoder &
Encoder with video Encoder) of digital part.
13-4-1 Outline
DIC1 (MPEG2 Decoder & Encoder with video Encoder) diverges from the 13.5MHz crystal, then generates
VSYNC and HSYNC.
DIC1 (MPEG2 Decoder & Encoder with video Encoder) does RGB encoding, copy guard processing and
D/Aconversion of 10bit Video signal converted into analog signal is outputted via amplifer of analog part.
DIC1 inputted from pin E1 with 13.5MHz generates HSYNC and VSYNC which are based on video signal. DIC1
is synchronous signals with decoded video signal.
The above signals, which are CVBS (Composite Video Burst Synchronized), Y(S_Video),
C(S_Video),Y(Component)/G(Green), Cr(component)/R(Red), Cb(component)/B(Blue), are selectively outputted
576i(interlaced Video Output), 576P(progressive Video Output).
DIC1 adopts 10bit D/A converter. DIC1 perform video en-coding as well as copy protection.
OSD_SEL
S-Video 1
OSD
MM1501
(VIC3)
CVBS
Video 1
MM1623
(VIC1)
Component
MPEG-2
CVBS
A/V CODEC
(DIC1)
MM1647
(SIC1)
SCART1 (TV)
MM1507
(VIC2)
Front Micom
POST2
RGB
SCART2 (EXT)
Video
Decoder
(TIC1)
RF
RF Tuner
NJM 2267
(6dB AMP)
AV3
CVBS/Y
VPS/Sync
Detector
OSD
74HC4051
(IC201)
RGB
Y/C
CVBS
AV1 (CVBS)
AV2 (CVBS)
Fig. 13-8
Samsung Electronics
13-9
Circuit Operating Descriptions
13-4-2 Video Switch (MM1507:VIC2,MM1501:VIC3)
MM1501, 1507 is 2by1 Video switch and VIC2 is switched by Pin15 of SIC1. It selects from RF Video signal via
TIC2(NJM2267) for Decoder CH. or normal video output via SIC1.
VIC3 is switched by Pin23 of FIC1. It selects Video Output from DIC1 or OSD SCREEN for Optional setting.
13-4-3 Analog Mux (BU4051, MM1501)
IC201(BU4051) and IC202(MM1501) are Analog Mux.
As input selecttion Pin(9, 10, 11) of the IC201 are controlled by the Front Micom, IC201 select among AV1 CVBS,
AV2 CVBS, AV3 CVBS, RF CVBS signal.
13-4-4 MUX IC for 2SCART (MM1647)
SIC1(MM1647) is Audio & Video switcher with I2C bus for Two SCART. I2C bus is connected with FIC1(Front
micom) and be control Pin 30 for AV1 CVBS OUTPUT is selected from pin5, pin28.
Pin 29 for AV2 CVBS OUTPUT is selected from pin5, pin3.
GND1
YIN D
5V
VCC1
SCL
I2C LOGIC
5V
12V
VIN TV
SDA
VCC1
BLK OUT
YIN D
VOUT TV
VCC2
VOUT EXT
VIN EXT
BIAS
LIN TV
BLK IN
MUTE
LOUT TV
LIN D
LOUT TV
FS OUT
LIN EXT
FS IN
BIAS2
PORT1
ROUT TV
RIN TV
ROUT EXT
PORT2
RIN EXT
RIN D
GND 2
NC
NC
Fig. 13-9
13-10
Samsung Electronics
Circuit Operating Descriptions
13-4-5 NTSC/PAL Video Decoder (TW9909 : Video Decoder)
The TIC1 (Video Decoder : TW9909) device is a high quality, single-chip digital video decoder that digitizes and
decodes all popular baseband analog video formats into digital component video. The TIC1 (Video Decoder
:TW9909) supports the analog-to-digital (A/D) conversion of component RGB and YPbPr signals, as well as the
A/D conversion and decoding of NTSC, PAL and SECAM composite and S-video into component YCbCr.
This TIC1 (Video Decoder : TW9909) includes four 10-bit 30-MSPS A/D converters. and A/D conversion of 10bit
analog Video signal converted into Digital Video signal (ITU-R656 Format) is outputted via DIC1 (MPEG2
Decoder & Encoder with video Encoder) of digital part.
The following output formats supply 10-bit 4:2:2 YCbCr to the DIC1 (MPEG2 Decoder & Encoder with video
Encoder) of digital part.
On CVBS and S-video inputs, the user can control video characteristics such as contrast, Brightness, saturation,
and hue via an I2C DIC1 port [PIN V17, V18] interface.
The TW9909 decoder includes methods for advanced vertical blanking interval (VBI) data retrieval. The VBI data
processor (VDP) slices, parses, and performs error checking on teletext, closed caption (CC), Copy Guard Detect
Processing and other VBI data.
13-4-6 Amplifier (MM1623)
VIC1 is 6dB amplifier.
Based on CVBS signal, the final output level must be 2Vpp without 75ohm terminal resistance.
Because the level of video encoder output is only 1Vpp, the level is adjusted with the special amplifier.
When mute of pin 3 is high active, if the pin is floating and connect to power, the output signal is never outputted.
CVBS, Y, C, Y(R), Cb(B), Cr(R) outputted from video encoder are inputted to VIC1 [Pin4, 6, 2, 10, 12, 14] respectively.
The signal to which gain is adjusted by amplifier is outputted from jack via 75ohm Resistance
(VR14, 15, 16, 23, 12, 13).
Samsung Electronics
13-11
Circuit Operating Descriptions
13-5 Audio
13-5-1 Audio Input Block
DVD-R130 has tree stereo line input terminals and internal TV-audio from RF Tuner Block.
These four analog audio signal source are converted to digital data by Input Block.
Input Block has Multiplexer(AIC51), Input Filter(AIC81, AIC82), and A/D Converter(AIC9).
The switching operation of AIC51 is controlled by FIC1(Front Micom) with I2C interface.
The signal selected by AIC51 are filtered by AIC81,AIC82.
The funtion of these OP-Amp is -6dB level scaling and second order Low Pass Filtering.
AIC9 is syncronized by three Digital clock from DIC1, and output Digital signal to DIC1(Dolby Digital
Encoder/Decoder).
AV1 In
(SCART 1)
AV2 In
(SCART 2)
AIC81
4560 OP-AMP
AV3 IN
(Rear)
AV4 IN
(Front)
DIC1
AIC51
AIC9
BD3824FS
PCM1802
Audio
Multiplexer
A/V Processor
AIC82
4560 OP-AMP
(Audio A/D
Converter)
TV Audio
(from tuner
block)
FIC1
Front Micom
DMN8602
(Dolby Digital
Encoder/Decoder)
IIC
Switch Control
Fig. 13-10
13-12
Samsung Electronics
Circuit Operating Descriptions
13-5-2 Audio output Block
DVD-R130 has four stereo analog line out terminal, and two digital output terminal.
Decoded signal by DIC1 is inputted to AIC1( D/A converter), then filtered and amplified by AIC4(OP-amp), and
finally ouputted via RCA terminal and Scart terminal.
The Signal outputted via AV2 is equal to those of AV1(Scart), and RCA Analog ouput terminal in normal mode.
The Digital audio signal is drived by AIC3 inverter and ouputted via Optical(TOS-link) and Coaxial(S/PDIF) terminal.
AV1
(TV)
SICI
MM1647
Scart IC
SCART
Audio Out
Control
Signal
AIC5
AV2
(EXT)
IC203
Audio
Multiplexer
4560
Buffer
Tuner Block
SCKI
L1
AIC4
4560 OP-AMP
AUALOG
AUDIO OUT
(RCA terminal)
BCK
A/V Processor
AIC1
L-OUT
R1
LRCK
PCM1742KE
R-OUT
L2
DICI
DMN8602
(Audio D/A
Converter)
(Dolby Digital Encoder/Decpder)
DOUT
ML
R2
MC
MD
Optal
Out
Coaxial
Out
DIGITAL Audio DATA
AIC3
74HCU04
(Inverter for Digital Out)
Fig. 13-11
Samsung Electronics
13-13
Circuit Operating Descriptions
13-6 Tuner
1) Low Pass Filter & High Pass Filter
This consists of IF trap circuit and UHF & VHF separation circuit. If the input signal is IF (45.75MHz),
this filter
prevents interference.
2) Single tune
This consists of a filter circuit, RF AMF, impedance conversion circuit, image trap and a single tuning circuit. It
prevents noise and other interference signals. It is very important part which improves NF (noise figure) and
prevents the various of spurious signals.
3) RF AMF
RF AMF is made of FET (Field Effects Transistor). It is controlled by AGC coming from IF DEMOD block.
4) Double tune
It consists of a double tuning circuit to improve characteristic of rejection that results in a better band
characteristic.
5) Mixer IC (Mixer, OSC, PLL)
It consists a VHF and UHF OSC and Mixer circuit. We applied mixer to make better characteristic of rejection,
it shows especially various beat characteristic.
6) PLL IC
The PLL IC plays a role selection of Tuner channel. It was built-in three wire PLL IC, charge pump and band
driver.
The minimum of step frequency is 31.25KH z.
a
Fran
Modulafor
VHF
8.P.F
b
VHF
SingleTune
c VHF
RF Amp
d
VHF
Double Tune
<AGC >
e
3
~
1
~
IF Single
5
~
< +B >
OSC 8uffer
VHF OSC
7
8
4
9
10
Fram IF Sect lon
V V U
9 8 6
L
f PLL IC
Mix IC IC100
TO IF Sect lon
< IF >
12
IF Amp
Mixer
Fram IF Sectlon
H
1/8 Prescaler
Band Driver
Prog.Dirlder
Band Driver
OSC Amp
3
4MHz
15 X-tal
~ 1
2
Phese Code
3wice Bas
Recelver
VHF OCS
VHF
1 Charge Pump
L.P.F
VHF
Single Tune
VHF
-RF Amp
16
VHF Mixer
VHF
Double Tune
14
13
12
VHF OSC
^
PB
&
TU
* ( )
CLOCK DATA ENABLE
1
LOCK
Fig.13-12
13-14
Samsung Electronics
Circuit Operating Descriptions
13-7 IF
1) SAW FILTER
It passes only needed band of the signal that is converted to IF frequency and decrease the others band to
minimize the effect of adjacent channel.
2) RF AGC Control
It used adjusting to determine RF AGC working point in tuner.
3) VCO Tank
When VCO tank detects PLL, it makes the signal which sets a standard.
4) AFT (Auto Frequency Tuning)
AFT automatically controls the oscillator frequency in the tuner, so that it retains a constant level.
It is a quadrature detection type. The carrier, which is detected from video det is directly input to AFT.
The 90 degree delayed phase signal is input at the same time to AFT and, the results come out.
5) IF AMP
IF signal , which is selected in Saw filter, is amplified in IF amp frequency enough to be detected. The IF amp
has parallel inputs & outputs structure.
Lim Amp
1
d
4.5 MHz
Tunlng
AGC
2
b RF AGC Control
Video Det
Video Amp
4
From
Tuner Section
a SAM Filter
(IF Amp)
21
5
6
APC
Det
Pra
Amp
To Tuner Section
SIF filter
4.5MHz
24
FM Det
10
N.S.C
EQ.Amp
B/W
19
VCD
16
APC Tine
Const SW
Mix
SIF Trap
17
Lock Det
15
IF AGC
14
c
VCD Tank
RF AGC
11
AFT Tank
RF AGC Amp
AFT
12
To Tuner Section
3
+B
4
AUDIO OUT
5
AFT OUT
6
VIDEO OUT
Fig. 13-13
Samsung Electronics
13-15
Circuit Operating Descriptions
MEMO
13-16
Samsung Electronics
14. Reference Information
14-1 Introduction to DVD
14-1-1 The Definition of DVD
DVD is the next generation medium and is the acronym of the Digital Versatile Disc or thr Digital Video Disc,
which maximizes the saving density of the disk surface using the MPEG-2 compression technology to enable the
storage of 17G bytes of data on the same size CD.
1) 7 times the storage capacity of the conventional CD
- Minimized the track pitch and pit size to 1/2 of conventional CD.
- Uses red laser with short-wavelenght of 650nm (635nm).
DVD Vs. CD-ROM
CD-ROM
CD-R/RW
DVD-ROM
DVD-R/RW
DVD-RAM
1.2mm
1.2mm
0.6*2mm
0.6*2mm
0.6*2mm
0.45
0.45(0.5)
0.6
0.6
0.6
Laser wavelenght
780um
780um
650um
650um
650um
Track pitch
1.6pm
1.6pm
0.74pm
0.74pm
0.615pm
Capacity
0.65GB
0.65GB
4.7GB
4.7GB
4.7GB
Track structure
Pit train
Groove
Pit train
Groove
Land/Groove
Disc Thickness
Lens NA
2) Disc Formats
DVD consists of two 0.6mm discs attached together, enabling access to the upper and lower side of the disk,
and 4 sides could be used at maximum.
Single Layer : 4.7GByte
Label
Polycarbonate
Bonding layer
Reflective layer
Polycarbonate
Dual Side Single Layer : 9.5GByte
Polycarbonate
Reflective layer
Bonding layer
Reflective layer
Polycarbonate
Samsung Electronics
Dual Layer : 8.5GByte
Label
Polycarbonate
Reflective layer
Bonding layer
Semi-reflective layer
Polycarbonate
Dual Side Dual Layer : 17GByte
Polycarbonate
Semi-reflective layer
Reflective layer
Bonding layer
Reflective layer
Semi-reflective layer
Polycarbonate
14-1
Reference Information
14-1-2 DVD Types
FORMAT
TYPE
DVD-Video
Playback Only
DVD-ROM
Read Only
DVD-Audio
Playback Only
DVD-R
1 Time Recording
Rewritable
APPLICATIONS
High quality image and sound for movies and other video media.
Multi-functional, multi-media software that requires large storage capacity.
High quality sound that exceeds the CD, multi-channel Audio.
As with CD-R, write only once
This can be virtually used as hard-disk, with a random
DVD-RAM
(more than 100,000 times)
Rewritable
read-write access
Similar to DVD-RAM except than its technology features
DVD-RW
(About 1,000 times)
14-2
a separated read-write access more like phonograph than a hard disk.
Samsung Electronics
Reference Information
14-2 DVD-Video Fromat
14-2-1 Main Features
1) Able to store up to 160 minutes of Movie by utilizing the MPEG-2 compression technology. ( Aver. 133min.)
2) Enables more than 500 lines of horizontal resolution. (Class corresponding to the Master Tapes used in
broadcasting stations)
3) Provides Dolby Digital 5.1ch Surround 3D sound, which enables theater quality sound (NTSC area).
• For PAL areas, 1 of either MPEG-2 Audio or Dolby Digital must be selected.
4) Multi-Language
• Able to store up to 8 languages of dubbing.
• Able to store up to 32 subtitle languages.
5) Multi-Aspect Ratio
3TV Mode alternatives ; 16:9 Wide Screen (DVD Basic)/4:3 Pan & Scan/Letter Box.
6) Multi-Story
Possible to implement Interactive Viewing which enables the user to select the scenario.
7) Multi-Angle
Able to view the camera angle you selected among the scenes recorded with multiple camera angles.
Note ; The above media features must have the DVD Title that contains the appropriate contents to function
properly.
14-2-2 Audio & Video Specifications
Classification
VIDEO
DVD-Video
Video-CD
Compression
MPEG-2
MPEG-1
Pixel
720 x 480
352 x 240
Horizontal resolution
Max. 500 Lines
Max. 250 Lines
Compression rate
1/40
1/140
Transmission speed
Max. 9.8Mbps (variable)
1.15Mbps (fixed)
TV aspect
16:9 / 4:3
Audio
Max. 8 streams
Recording type
AUDIO
4:3
2CH stereo
Dolby Digital
Linear PCM
MPEG-1 Layer 2
Transmission rate
448Kbps/stream
6.144Mbps/stream
224Kbps
Channel
5.1CH/stream
8CH/stream
2CH
Sampling frequency
48KHz
16, 20, 24Bit/48, 96KHz
16Bit/44.1KHz
Samsung Electronics
LD
Analog
Max.420 Lines
Analog
4:3
2 Analog CH.
2 Digital CH.
(16Bit/44.1KHz)
or
1 Analog CH.
1 Stream of Dolby Digital
2 Digital CH.
(16Bit/44.1KHz)
14-3
Reference Information
14-2-3 Detailed Feature
DVD-Video Feature 1
When Developing the DVD Software, various addition and modification is possible.
As the storage capacity increases, the DVD-Video separates the main data and the additional data such as the
Multi-Function into different data areas, enabling the control of time-data ratio to provide the format that enables
the flexible Software development
• 1 Movie (3.5Mbps)
+ Subtitle (1 Language)
+ Surround Audio (1 Language)
= 160min storage (4.673Gbytes)
• 1 Movie (3.5Mbps)
+ Subtitle (4 Language)
+ Surround Audio (4 Language)
= 160min storage (4.680Gbytes)
• 1 Music Video (4Mbps)
+ 2ch High quality Audio (96kHz/24bit)
= 72min storage (4.648Gbytes)
DVD-Video Feature 2
Application of the MPEG-2 compression technology.
DVD-Video uses the variable compresion technology, the MPEG-2 to compress the moving image optimally, minimizing the Data loss to Provide a clear, natural screen while increasing the storage time.
• MPEG-2 (Variable compression : Max. 1/40)
DVD-Video
Video-CD
• MPEG-1 (Fixed compression : Max. 1/140)
- Frame unit compression.
- Compresses all data using the same ratio.
- Fast movements are jagged, and unnatural
14-4
Amount of data
- Field unit compression.
- Compression rate change according to the amount of Data.
- Differentiates the still image and the moving image
compression rate, reducing Data loss and enables
efficient compression.
Time
Amount of data
Loss area
Time
Samsung Electronics
Reference Information
DVD-Video Feature 3
High quality surround audio.
DVD-Video can store the audio using the 5.1ch Dolby Digital compression or the advanced Liner PCM method,
providing the better-than-CD quality and theater like audio quality.
• DTS (Digital Theater System)
Home theatre and music playback in the home, DTS provides high quality 5.1-channel surround sound with
many extras not offered by other consumer formats. As well as handling DTS-branded releases from a growing
number of music labels and consumer software producers, DTS provides enhanced 6.1 matrix and DTS 6.1
discrete decoding that envelopes the listener in sound. DTS technology is featured in a wide cross section of
receiver/pre-amplifiers, DVD players and and add-on components from leading consumer audio vendors
• Dolby Digital (AC-3)
- Unlike the traditional Dolby pro-Logic method, the Dolby Digital method separates all 5 main channels
(Front L/R, Center, Surround (Rear) L/R)and the Sub woofer to provide live surround audio.
- Using the Down Mix method, the conventional Dolby Pro-Logic and Stereo are all compatible.
- Each separated channels are played back at CD quality sound. (Frequency band: 20Hz ~ 20KHz)
• Linear PCM (Pulse Code Modulation)
- Provides the high quality Digital sound without the audio data compression.
- Various Digital Recordings are possible as shown in the table to the right.
Sampling Frequency
Bit Rate
16bit
48KHz
20bit
24bit
16bit
96KHz
20bit
24bit
• Dolby Digital compatible Audio Mode
Channel Format
Audio Coding
Mode
Front
L
1/0
R
L
O
3/0
O
2/1
O
3/1
O
2/2
O
3/2
O
Mono
O
O
O
O
Remark
R
O
2/0
Samsung Electronics
C
Surround (Rear)
Stereo
O
O
Mono
O
Mono
Surround
O
O
O
O
O
O
14-5
Reference Information
DVD-Video Feature 4
Multi-Language
• Audio Dubbing - Max. 8 Languages
• Subtitle - Max. 32 Languages. Capable of storing, and selectiong.
• Linear PCM (Pulse Code Modulation)
DVD-Video Feature 5
Multi-Aspect
• Unlike the conventional VCD or LD, DVD-Video has the default of 16:9 Wide, and can be viewed using the
conventional 4:3 TV, enabling the expansion of viewer selection capabilities.
- 16 : 9 TV : Wide Mode (16:9 Wide Full Screen)
- 4 : 3 TV : Letter Box Mode, Pan & Scan Mode
16:9 Wide
4:3 Pan & Scan
4:3 Letter Box
Note ; This function is disc-dependent, may not work on all DVDs.
DVD-Video Feature 6
Multi-Angle
• Up to 9 angles of view may be stored, enabling the viewer to select a specific viewpoint at a given time.
--> Especially, for the Music Video and Sports Title, this provides a more lively image of the scene.
Note ; This function is disc-dependent, may not work on all DVDs.
14-6
Samsung Electronics
Reference Information
DVD-Video Feature 7
Multi-Story
• DVD-Video provides the enviroment suitable for the bi-directional Software develoment, providing multiple
scenarios. This feature enables the Multi-Story function.
OPTION
Parental Lock
• For the titles that are not suitable for children viewing, Parental Locks are set, requesting user defined
passwords for viewing
• Parential Locks may be set on specific frames of the Title, enabling the player to skip those frames during
playback.
COPYRIGHT
Regional Code & Macrovision
• Classify the world into 6 regions, and if the DVD Title and the Player’s “Reginal Code” do not agree, playback
is prohibited.
• Regionnal Coding is optional for the Soft developers (Region 0 All Code), but the Hardware developers
must adopt the appropriate regionnal code for sale.
- Region 1 : The United States and its territories, Canada.
- Region 2 : Europe, Japan, Greenland, Egypt, South Africa, the Middle East.
- Region 3 : Taiwan, Hongkong, Korea, South East Asia.
- Region 4 : Mexico, South America, Australia, New Zealand.
- Region 5 : Russia, Eastern Europe, India, Africa.
- Region 6 : China.
- Region 0 : Worldwide (All Code)
ˆ
Œ
´
Ø
Œ
´
Œ
ˇ
¨
´
ˆ
¨
• Adoptation of the Macrovision System disables the copying on to other media.
Samsung Electronics
14-7
Reference Information
Remark
DVD-Video Authoring Process
• The image quality of the DVD-Video may vary accoring to the quality of the Master and the Authoring Process
- The image quality of the DVD-Video varies according to the Digital Mastering Source such as the
conventional LD, VCD, or Original Film.
- Different Authoring Process are used accoring to the Software developers, and this may affect the
DVD image quality.
• Authoring Process
Video/Audio
Master
MPEG-2
Encoding
Surround Audio
Master
AC-3/MPEG Audio
Encoding
Subtitle
Master
Subtitle
Encoding
bit stream
Disc
Production
bit stream
Video/Audio
Subtitle
Multiplexing
Cutting
Master
bit stream
Authoring Process
14-8
Samsung Electronics
Reference Information
14-3 About IEEE1394
14-3-1 Comparison between IEEE-1394 and other digital interfaces
Since there are many different interfaces available, for example, RS422, RS644, and USB, vision system integ rators
are very likely to be confused when choos ing the right interface for their application. For the ideal design of a
vision syste m, it is vital to have the righ t bus/inte rface. To make things even more complex, ther e is no easy
answer such as IEEE-1394 is the best choice.
Furthermore, the new CameraLink standard, promoted by compan ies such as Puln ix, Basler AG, and many
frame grabb er companies, seems to be the stat e of the art interface. So why should IEEE-1394 be an alternative?
These questions are as complex as mostvision applicatio ns and there is no simple guideline .
Each of these interfaces offers many benefits and each of them has its individual drawbacks and restric tions. In
the table below, we try to give a brief comparison of the most popular interface systems.
Topology
Windows Driver
“Guaranteed”
RS 644 [1]
CameraLink
IEEE-1394
USB 2
Link
Link
Bus
Bus
Proprietary
Proprietary
Native
Native
(Win 200, Win 98)
(Win 200, Win 98)
~20 to 40 MByte/s
~255 MBytes/s
~32 MBytes/s[2]
~38 MBytes/s[2]
~10 m @ 40MHz
~10 meters
4.5 meters
5 meters
10
4
2
~8 MBytes/s [2]
~9 MBytes/s [2]
Bandwidth
Cable Length
~20 m @ 200MHz
Wires Needed for
8 Data Bits
22[3]
Parameter Port
No
≥ 1 KByte/s
[1] These specs are for a typical 8-bit camera application operating at 20 MHz or at 40 MHz.
[2] 80% of the bus bandwidth is used for image data and 20% is used for parameter data.
[3] 16 wires are used for data bit transfer and two wires each are used for the separate Line
Valid, Frame Valid, and Pixel Clock signals required with RS-644 transmission.
A careful comparison of the specifications shown in the table should be your first sele ction guide for the interface. For example, for an integ rator who needs very high speed, USB 2 and IEEE-1394 are not the first choice. On
the other hand, these buses are the ones to select in cases
where multiple cameras are needed or cost is a critical issue. Also, the user needs to be aware
that the D-Cam specification curre ntly does not specifically support Line Scan cameras.
However, the specification is open and line scan suppor t could be achieved via Format 7. As
for USB 2, it is still in its infancy in machine vision and we are not aware of any kind of machine vision support.
Samsung Electronics
14-9
Reference Information
14-3-2 Fiexibility and Cost Reduction
Many image processing application engineers face a familiar group of problems when designing and building a
system. The end user requires system flexib ility, simple adaptation, fast delivery times, and most importantly a
reasonable price. With conve ntional systems, whether analogor digital, engine ers must confine them selves to
certain combina tions of the existing cameras, frame grabbers, and software. The product choice for this system
config uration is limited. Unless the decision is made to use a high cost frame grabber that supports multiple cameras, sometimes known as multi-norm , it is usually not possible to operate camera s with different resolutions
from the same frame grabber.
For many applications, the introductio n of digital cameras is hindered by the cost specified by the end custom er,
however technically effective digital cameras may be. With the increa sed use of IEEE-1394 in the industrial image
processing business, many of these problems are solvable in a sure , safe , and cost effec tive way.
1) Hardware Cost Example
This example compares two simi lar vision systems. Each system uses four Megapixel
resolution digital cameras . The traditio nal solu tion consists of one frame grabber per camera, one parallel digital
data cable per camera, and one power supply per camera.
The 1394 solution requi res one hub and one interface card to connect the four cameras , along
with five ine xpensive 1394 cables. The 1394 cables carry power to the cameras directly from the computers internal power supply. (Note tha t not all compute rs are capab le of supplyi ng enough power for the cameras. In
some cases a separate power supply may be required.)
Traditional Solution
with multiple frame grabbers
Price
1394 Solution
Price
Four Cameras
18,000
Four 1394 Cameras
18,000
Four Frame Grabbers
4,400
One 1394 Interface Card
100
Four Cable
400
One 1394 Hub
120
Four power Supplies
320
Five Cables
150
Total
14-10
$23,120
Total
$18,370
Samsung Electronics
Reference Information
14-3-3 Application Examples
Today, there are already applications realizing the benefits of IEEE-1394 technology. For example, at one of our
customer sites, Basler was faced with a vision system which has the following specificatio ns:
The machine is a hig h-speed assembly system . Two indepe ndent robots take different par ts
(different in size, shape, and reflection) from a support unit and mount these parts on a mounting plate. Timing is
crucial, and in the worst case, a part must be taken from the tray every 100 ms. Accuracy of parts mounting is also
critical (0.5 mm) . To have a vision system inspecting these operations , 4 cameras (2 on each of the rob ots) are
needed:
- 2 low resolution Basler A302f camera s (640 x 480) for checking if the mounting plate is in place
- 2 high-resolution Basler A101f cameras (13 00 x 1030) for checking the components to be mounted.
Since most of the parts are differen t, the two A101f cameras must be reconfigured before almost every image
acquisit ion. In the worst case, the AOI, shutter, and som etim es gain need to be adjusted.
1) Solution used before Basler s Intervention
The customer used analog camera s with CCIR resolution (768 x 582) only. This drast ically restricted the number
of parts which could be mounted using the robots. Sin ce thes e camera s had no communication por t for configuration, adjusting the AOI was not possible and differ ences in reflection of the parts needed to be adjusted for by
driving a flash circuit. All cameras were interfaced into one frame grabber (one PC).
2) Possible solution wih digial cameas using RS 644 OR Camera Link
Using RS 644 or CameraLink based camera s, the customer would need one frame grabber for
each camera. It is very likely that the user would need two PCs (one for each robot). Changing the camera-configuration on the fly would require adv ance d grab ber cards since simple grabbers are not capable of easily changing their registers for different AOIs.
3) IEEE-1394 solution
All cameras are attached to a sing le interface card in the PC. The Basler A302f is only used when a new mounting
plate is pos itione d by the handler. In norm al operation , only the two Basler A101f cameras will be sending data
at the same time and they will be operating at about 10 FPS. This results in a data rate of about 27 MBytes/s,
which is well within the specification for IEEE-1394.
Since IEEE-1394 supports bi-directional communication between the camera and the PC, before each frame
capture , the PC can easily change resolution, gain , offset, shutter speed, or whatev er is required.
The IEEE-13 94 solution results in the se clea r advanta ges for the custom er:
- Onlyone PC,
- Only one inter face card (very inexpensive compare d with frame grabber cards ),
- Easy and inexpens ive cabl ing ,
- The system meet s the expect ations for spee d and accuracy,
- The range of inspect able parts is much bigger than with the old syste m.
Samsung Electronics
14-11
Reference Information
MEMO
14-12
Samsung Electronics